ENOTEC Inc. 6206 Sandy Ridge Circle NW North Canton, Ohio 44720-6686 Tel: (+1) 330-498-0202 Fax: (+1) 330-497-9802 Email: [email protected] Web: www.enotec.com Manufacturers of InSitu Oxygen & Combustion Analyzer "Energy Saving" Instruments for Industrial Applications. World Headquarters: ENOTEC GmbH Höher Birken 6, D-51709 Marienheide, Germany. A Quality Assured BSI ISO 9000 Certified Company. ENOTEC ® is a registered Trademark COMTEC 6000 InSitu Oxygen & Total Combustibles Analyzer Typical Installations: Power Plants, Refineries, Cement Plants, Steel Mills, Chemical Industries, Food Industries, Pulp and Paper Manufacturers, Marine Boilers, and anywhere combustion control is required. Unique Features and Performance: InSitu MXP COe sensor measuring total combustibles in flue gases up to 1112°F (600°C) 100% Gas-tight brazed MLT Oxygen sensor operating at 1472°F (800°C) Optimum combustion control of fuel/ air ratio Designed to upgrade existing oxygen probe only systems Maintenance free for several years Fast process gas response - less than 3 seconds with patented filter head Simple menu setup, operation and system diagnostics Tough, Reliable and Accurate Quality German Engineering InSitu O 2 and COe Flue Gas Analyzer Upgrade to COMTEC - the combustion optimizer Think Safety! ENOTEC Flue Gas Analyzers simply outperform other systems with its unique InSitu design features measuring Oxygen and Total Combustibles (COe) in real time - inside the flue duct. Both sensors are located directly under the probe filter head inside the flue gas stream. There is no need for sampling, gas extraction, cooling, or filtering the gas stream. Filter blocking is not an issue, even in high dust applications. The system constantly measures inside the process displaying percent Oxygen and ppm combustible values for optimum combustion plant safety operation.