Insight Release Notes

Release Notes

Revision 3.11 s

Insight

.

125-3160-311 Building Technologies

Insight Revision 3.11

Release Notes

Copyright Notice

2 Siemens Industry, Inc. 125-3160-311

Copyright Notice Rev. 15, June 2010

Notice Document information is subject to change without notice by Siemens Industry, Inc. Companies, names, and various data used in examples are fictitious unless otherwise noted. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Siemens Industry, Inc. All software described in this document is furnished under a license agreement and may be used or copied only in accordance with license terms. For further information, contact your nearest Siemens Industry, Inc. representative. Copyright 2010 by Siemens Industry, Inc.

To the Reader Your feedback is important to us. If you have comments about this manual, please submit them to: [email protected]

Credits Adobe® Reader® is a registered trademark of Adobe Systems Incorporated. APOGEE®, APOGEE GO®, Insight® and InfoCenter® are registered trademarks of Siemens Industry, Inc. BACstac™ Routing Edition is a trademark of Cimetrics, Inc. Corel® and Corel DESIGNER® are registered trademarks of Corel Corporation. Dialogic® is a registered trademark of Intel Corporation. Internet Explorer® is a registered trademark of Microsoft Corporation. Java™ is a trademark of Sun Microsystems, Inc. LONMARK® and LONWORKS® are registered trademarks of Echelon Corporation. .NET Framework® is a registered trademark of Microsoft Corporation. Objectivity/DB® is a registered trademark of Objectivity, Inc. ScanSoft® is a registered trademark of ScanSoft, Inc. SentinelLM® is a registered trademark of SafeNet, Inc. Windows 7®, Windows Vista®, Windows Server 2008®, Windows Server 2003®, and Windows XP® are registered trademarks of Microsoft Corporation. Xerces© is a copyright of Apache Software Foundation. Other product or company names mentioned herein may be the trademarks of their respective owners. Printed in USA

End User License Agreement


End User License Agreement IMPORTANT—READ CAREFULLY: This End-User License Agreement ("EULA") is a legal agreement between you and Siemens Industry, Inc. from which you obtained limited nonexclusive rights to use the INSIGHT Operating Software Product. By installing, receiving, implementing or otherwise using the Siemens Industry, Inc. INSIGHT Operating Software Product, you agree to be bound by the terms of this EULA. If you do not agree with the terms, Siemens Industry, Inc. is unwilling to license the INSIGHT Operating Software Product to you. In such event, you should promptly contact Siemens Industry, Inc. for instructions on return of the INSIGHT Operating Software Product. Siemens Industry, Inc. provides this INSIGHT Operating Software Product and licenses its use by the terms herein. You assume responsibility for the selection of the INSIGHT Operating Software Product to achieve your intended results. GRANT OF LICENSE. If the INSIGHT Operating Software Product was obtained by you for use on a

single machine, then you may only install the INSIGHT Operating Software Product on a single machine at any one time.

If you obtained functionalities from Siemens Industry, Inc. that permit networked use of the INSIGHT Operating Software Product, you may copy and distribute the INSIGHT Operating Software Product over an internal network for use, at any one time, by the number of active concurrent users for which you obtained an EULA.

You may make a copy of the INSIGHT Operating Software Product in object form for backup purposes in support of your use of the INSIGHT Operating Software Product.

You may not sublicense, assign or transfer the EULA or the INSIGHT Operating Software Product. Any attempt to sublicense, assign or transfer any of the rights, duties or obligations hereunder is void.

YOU MAY NOT OTHERWISE COPY, DISTRIBUTE OR TRANSFER THE INSIGHT OPERATING SOFTWARE PRODUCT.

IF YOU TRANSFER POSSESSION OF ANY COMPLETE COPY OR PORTION OF THE INSIGHT OPERATING SOFTWARE PRODUCT TO ANOTHER PARTY, WITHOUT THE EXPRESS WRITTEN CONSENT OF SIEMENS INDUSTRY, INC., YOUR LICENSE IS AUTOMATICALLY TERMINATED. YOU RECOGNIZE THAT SUCH TERMINATION IS NOT A COMPLETE REMEDY AND SIEMENS INDUSTRY, INC. IS ENTITLED TO SEEK FURTHER RELIEF SHOULD YOU VIOLATE THIS EULA.

REVERSE ENGINEERING, DISASSEMBLY. You are prohibited from reverse engineering, disassembling, decompiling, or decoding the object code provided to you, or otherwise translating the object code for the INSIGHT Operating Software Product, or permitting any third party to do the same. You recognize that your rights to use the INSIGHT Operating Software are strictly limited to use of the code in the object form as provided to you by Siemens Industry, Inc. pursuant to this EULA. TERM. The EULA is effective until terminated. You may terminate it at any time by destroying the INSIGHT Operating Software Product together with all copies in any form. It will also terminate upon conditions set forth elsewhere in the EULA or if you fail to comply

End User License Agreement


with any term or condition of this EULA. You agree upon such termination to destroy the INSIGHT Operating Software Product together with all copies. LIMITED WARRANTY. THE INSIGHT OPERATING SOFTWARE PRODUCT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE INSIGHT OPERATING SOFTWARE PRODUCT IS WITH YOU. SHOULD THE INSIGHT OPERATING SOFTWARE PRODUCT PROVE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. Siemens Industry, Inc. does not warrant the functions contained in the INSIGHT Operating Software Product will meet your requirements or that the operation of the INSIGHT Operating Software Product will be uninterrupted or error free. However, Siemens Industry, Inc. warrants the media on which the INSIGHT Operating Software Product is furnished to be free from defects in materials and workmanship under normal use for a period of ninety days from the date of shipment. LIMITATIONS ON REMEDIES. Siemens Industry, Inc.'s entire liability and your exclusive remedy shall be: the replacement of any media not meeting Siemens Industry, Inc. "Limited

Warranty" and which is returned to Siemens Industry, Inc. or an authorized Siemens Industry, Inc. distributor, or

if Siemens Industry, Inc. or an authorized Siemens Industry, Inc. distributor is unable to deliver a replacement media which is free of defects in materials or workmanship, you may terminate the EULA by returning the INSIGHT Operating Software Product and your money will be refunded.

IN NO EVENT WILL SIEMENS INDUSTRY, INC. BE LIABLE TO YOU FOR ANY DAMAGES INCLUDING ANY LOST PROFITS, LOST SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH SOFTWARE PRODUCT EVEN IF SIEMENS INDUSTRY, INC. OR ANY AUTHORIZED SIEMENS INDUSTRY, INC. DISTRIBUTOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR FOR ANY CLAIM BY ANY OTHER PARTY. TERMINATION. Upon termination of this EULA, all rights granted to you will terminate and revert to Licensor. Promptly upon termination of this EULA for any reason or upon discontinuance or abandonment of your possession or use of the INSIGHT Operating Software Product, you must return or destroy all copies of the INSIGHT Operating Software Product in your possession, and all other materials pertaining to the INSIGHT Operating Software Product (including all copies thereof). You agree to certify your compliance with such restriction upon Licensor's request. GENERAL. This EULA will be governed by the laws of the State of Illinois, USA. Because some states/jurisdictions do not allow the exclusion or limitation of liability for consequential or incidental damages, and/or a limitation of implied warranty, such limitations may not apply to you. In the event that any term of this EULA is or becomes or is declared to be invalid or void by any court or tribunal of competent jurisdiction, such term or terms shall be null and void and shall be deemed severed from this EULA and all the remaining terms of this EULA shall remain in full force and effect.


Table of Contents

Introduction ........................................................................................................... 6 What this Document Covers....................................................................................... 6 Where to Find Additional Information ......................................................................... 6

Installation ............................................................................................................. 8 System Recommendations ........................................................................................ 9 Remote Notification Option Considerations ............................................................. 10

What’s New in Revision 3.11? ............................................................................. 11 BACnet Schedule Enhancements ............................................................................ 11 APOGEE GO ............................................................................................ 11 Report Builder/Viewer ............................................................................... 12 Scheduler .................................................................................................. 12 Enhanced Graphics Option ...................................................................................... 13 Enhanced Scheduler Section in APOGEE GO ........................................................ 14 Improved Standard Alarm Priority Display ............................................................... 15 Streamlined Scheduler Interface .............................................................................. 16 Support for Controller Mounted Operator Display (LCD Auto Login) ....................... 17 General Enhancements ............................................................................................ 18 SentinelLM License Codes ....................................................................... 18 BACnet Cimetrics BACstac ....................................................................... 20 Windows Services ..................................................................................... 20 Enhancements to Applications ................................................................................. 21 Alarm Bar .................................................................................................. 21 Alarm Status.............................................................................................. 21 APOGEE GO ............................................................................................ 21 Event Builder ............................................................................................. 21 Graphics .................................................................................................... 22 Insight Backup Utility ................................................................................. 22 Point Editor................................................................................................ 22 Remote Notification Option ....................................................................... 23 Report Builder/Viewer ............................................................................... 23 System Activity Log ................................................................................... 23 System Profile ........................................................................................... 23 Trend Editor .............................................................................................. 25

Introduction What this Document Covers


Introduction Welcome to the Revision 3.11 Release Notes (125-3160-311).

NOTE: The electronic version of the Release Notes, available in PDF format on the Insight installation media, contains up-to-date information and supersedes any printed version of this manual.

Your feedback is important to us. If you have comments about this document, please submit them to the following email address: [email protected]

What this Document Covers These Release Notes include the following sections: Installation Describes the types of installations that you can perform and tells you where to find additional setup information. What’s New in Revision 3.11? Provides descriptions of the new features, system enhancements, and resolved defects provided with Revision 3.11.

Where to Find Additional Information You can find additional information in the following places:

Getting Started Online Help The Getting Started help—which appears once you have completed the software installation—provides instructions for starting the software, updating to the current revision, converting an existing database, and so on. A master help file displays with links to specific procedures that you must complete for the software installation. This information is also available from the Online Documentation screen and is integrated with the installation of the software, covering the following topics: Starting the Insight Software Updating from Insight Revision 3.10, 3.9.1, or 3.9 Converting the database from Insight PC 2.x to Insight 3.x Setting Up APOGEE Ethernet Microserver (AEM) Setting Up APOGEE GO Setting Up Auto-Dial Setting Up BACnet Setting Up BACnet Field Panel Setting Up Ethernet BLN

Introduction Where to Find Additional Information


Setting Up OPCServer Setting Up Remote Notification Setting Up Soft Controller Setting Up Terminal Services Installation Troubleshooting

Online Help Information about all applications is incorporated into the online help system that is automatically installed with the software. You can access online help in an application, as well as globally, by using one of the following methods: To access help for a window, dialog box, or menu command, select the item and

press F1. Most dialog boxes also include a Help button that displays help for the task you are performing.

To obtain help for a specific application, open that application, and from the Help menu, click Help Topics.

To access all help, click on the Main Menu. This displays the Online Documentation screen that allows you to access the Release Notes and information about setting up and using the software and its options.

A shortcut to the Online Documentation screen is within the Insight Version 3 program group and is accessible even if the Insight application is not running.

Related Documentation Refer to the following documents for additional information about the software and its options, which can be accessed in PDF format from the Online Documentation screen: Insight Revision 3.11 with Enhanced Graphics Option Release Notes (125-3160-

311) Insight Revision 3.11 User Guide Life Safety Option for Insight – ALS3 Getting Started (571-585-311) Insight for XLS-MXL and Insight Life Safety Option for FireFinder XLS-MXL Getting

Started Manual (571-622-311) New Features of 3.11 for Existing 3.10 Users Insight Revision 3.11 for New Users

NOTE: All the information contained in the User Guide PDF is also included in the online help. To access the help files for all applications, click the Insight Help link on the Online Documentation screen.

Installation Where to Find Additional Information


Installation

CAUTION

All Insight workstations on a Management Level Network (MLN) must be running the same revision of the Insight software to properly communicate together.

You can perform the following installations: A new installation of Revision 3.11. An update to Revision 3.11 from an existing Revision 3.10, 3.9.1, or 3.9 installation. An upgrade and database conversion of an existing Insight PC 2.x database to

Revision 3.11.

Before installation, do the following:

CAUTION

In order to properly install all applications, you must have elevated Windows user privileges on workstations running Windows 7, Windows Vista, or Windows Server 2008 operating systems if User Access Control (UAC) is enabled.

Back Up Databases. Before updating to or installing the latest software revision, we recommend that you fully back up your existing Insight database.

Install Operating System Software. You can only install the software after you have properly installed and configured the supported Windows operating systems listed in the System Recommendations.

If you intend to use the same server computer for both your Insight Database Server and your InfoCenter Advanced Server, then only the Windows Server operating systems are supported (not Windows XP, Windows Vista, or Windows 7).

Install Windows Service Packs. Before installing the software, it is highly recommended that you install the service packs—with the latest Microsoft updates and security patches—listed in the System Recommendations.

Other Third-Party Software. Adobe® Reader® is required to read the PDF version of the Release Notes. For your convenience, Adobe Reader is included on the installation media.

Install Corel DESIGNER® 9.0. Install DESIGNER 9.0, which is included on the installation media. In order to have a registered, non-expiring version of the DESIGNER software installed, you must install it using the third-party tools section of the Insight Installation dialog box. Not doing so will install a trial version of the software that will eventually expire.

Installation System Recommendations


During installation: For installation instructions, refer to the Getting Started Checklist in the installation media package.

After installation, do the following: If you updated the software and the BACnet Option was already installed, you must

install the updated Cimetrics BACstac Protocol. For more information, see "Updating to Insight 3.x When the Insight BACnet Option Is Already Installed" in Setting Up BACnet, available from the Getting Started link in the Online Documentation screen.

System Recommendations

NOTE: For existing Insight 3.x users, it isn’t necessary to upgrade your current hardware unless you are experiencing visible performance issues. If you are looking to upgrade your existing system, use the following information as a recommended purchasing guideline.

For additional requirements for connecting Auto-Dial, AEM, and BLNs, see the Getting Started help that displays after you install the software. Windows Server 2008 (32-bit), or Windows Server 2008 R2 (64-bit) Standard or

Enterprise Edition; Windows Server 2003 Standard or Enterprise Edition; Windows Vista Business or Enterprise Edition; Windows 7 Professional or Ultimate Edition; Windows XP Professional. NOTE: If you intend to install the Insight software on a Windows cluster: The Enterprise Edition of Windows Server 2003, Windows Server 2008, or Windows Server 2008 R2 is required.

Windows Server 2008 Service Pack 2 or later (Recommended); Windows Server 2003 Service Pack 1 or later (Required); Windows Vista Service Pack 2 or later (Recommended); Windows XP Service Pack 2 (Required) or later (Recommended).

Microsoft .NET Framework 2.0. (Required) 7200 RPM hard drive or better DVD-ROM drive Video card and monitor capable of supporting 1280 × 1024 resolution (Required)

with a minimum of 16-bit color NOTE: If you are using the Enhanced Graphics Option, a 256 MB video card (minimum) is required.

An external storage device for performing backups. A DVD-RW drive is highly recommended, or a USB mass storage device, CD-RW, or tape drive.

If connected to a network or using Ethernet and/or BACnet field panels, an Ethernet Adapter Card including TCP/IP Protocol, minimum 10 Mbps, and IEEE 802.3 Ethernet is required.

Installation Remote Notification Option Considerations


NOTE: An Ethernet adapter card and an MLN are not required for stand-alone Insight workstations that will not be connecting to a network.

A multi-port serial port adapter to connect dedicated BLNs and Auto-Dial modems. (Recommended to connect to a BLN at 115.2 Kbps or higher. Computer COM ports can be used to connect BLNs at lower speeds.)

Insight Database Servers Any dual-core processor or better (Intel® Pentium® D/AMD Athlon™ 64 X2 or

better) 2 GB RAM SentinelLM Computer ID Key on the LPT1 Port of the Insight Database Server or a

Sentinel LM on USB Computer ID Key Connected to a USB port on the Insight Database Server

Insight Database Clients Any single-core processor or better (Intel® Pentium® 4/AMD Athlon™ 64 or better) 1 GB RAM

Remote Notification Option Considerations If you are using the Remote Notification Option application’s voice notification and dial-in features, you must also install the Dialogic software, which is available on the Insight installation media. For more information, click Install Dialogic Components for Remote Notification in the Pre-Installation screen.

What’s New in Revision 3.11? BACnet Schedule Enhancements


What’s New in Revision 3.11? This section describes new features, system enhancements, and information about resolved defects delivered with this revision, including: BACnet Schedule Enhancements [➙ 11] Enhanced Graphics Option [➙ 13] Enhanced Scheduler Section in APOGEE GO [➙ 14] Improved Standard Alarm Priority Display [➙ 15] Streamlined Scheduler Interface [➙ 16] Support for Controller Mounted Operator Display (LCD Auto Login) [➙ 17] General Enhancements [➙ 18] Enhancements and resolved defects for specific applications [➙ 21] For detailed information on any of these features and enhancements, please see the online help system.

BACnet Schedule Enhancements BACnet schedule enhancements have been made in the following applications:

APOGEE GO Creating BACnet Schedules and Calendars. The Scheduler application has been

enhanced so that you can create BACnet schedules and calendars. Viewing BACnet Schedules. In the Scheduler application, the View Schedules by

Filters section has been enhanced with a View BACnet Schedules checkbox, which enables you to view BACnet schedules on the main Scheduler window. In addition, exception schedules (if defined) can also be viewed on the main Scheduler window.

What’s New in Revision 3.11? BACnet Schedule Enhancements


Report Builder/Viewer Display of Point Usage for BACnet Schedules. The Point Usage Report has been

enhanced to display point usage in BACnet schedules.

Scheduler Display of BACnet Schedules. The Scheduler application has been enhanced so

that BACnet schedules now display in the calendar view. In addition, you can now modify a BACnet schedule by double-clicking its entry in the Scheduler application.

Week Day Values Auto-populated. In the BACnet Schedule Properties, Calendar Entry Properties, and Exception Properties dialog boxes, when you specify values for the Day, Month, and Year fields, the Week Day field is automatically populated with the appropriate day of the week.

Improved BACnet Exception Schedule Setup. In the Exception Properties dialog box, the system automatically populates all the fields with the values from the Effective Period's Start date information. When defining a Week and Day exception type, the system automatically populates the Month and Week Day fields with the values from the Effective Period's Start date information.

New BACnet Schedule Properties Dialog Box. This new dialog box provides a more streamlined method of editing BACnet schedules, which allows you to focus on the most commonly-used features of BACnet schedules.

What’s New in Revision 3.11? Enhanced Graphics Option


Showing or Hiding BACnet Schedules in the View Menu. The View menu has been

enhanced with a check box that enables you to show or hide BACnet schedules. Basic button added to the Advanced BACnet Schedule Properties dialog box. The

Advanced BACnet Schedule Properties dialog box has been enhanced with a Basic button, that allows you to go back to the BACnet Schedule Properties dialog box.

Enhanced Graphics Option Included with this revision is the Enhanced Graphics Option, which is an updated library of customizable gauges and graphs for the Graphics application. In addition, this option supports the new Energy Performance Dashboard. For more information on the Energy Performance Dashboard, see the Siemens Energy Performance Dashboard Graphics and PPCL Program Application Guide (571-153). The following features are included with the Enhanced Graphics Option: New SentinelLM License Code. The new INEGO license code is required for the

Enhanced Graphics Option.

What’s New in Revision 3.11? Enhanced Scheduler Section in APOGEE GO


New Gauges and Charts. The Insert menu has been updated with a new Enhanced Graphics Option item, from which you can create the following: – Gauges: Angular, Bulb, Cylinder, Linear, and Thermometer. – Charts: 2D, 3D Column, and Pie.

Angular Gauge Example. 3D Column Chart Example.

In addition, you can create the gauges and charts from the new Enhanced Graphics Tools toolbar.

Enhanced Graphics Controls Properties Dialog Box. The new Enhanced Graphics

Controls Properties dialog box allows you to customize the properties of charts and graphs.

Enhanced Scheduler Section in APOGEE GO New Tabular Format. Previously, information in the Schedule section would be

represented as a vertical block, with its position and height determined by the Start Time and Duration. In this revision, the Schedule section has been enhanced to display the data for the Daily view in a tabular format, with each row in the table representing a schedule entry, including a visual representation of the schedule’s time range.

What’s New in Revision 3.11? Improved Standard Alarm Priority Display


New Timeline Display Mode. The Schedule section has been enhanced with a new

Timeline display mode that provides a visual representation of the schedule's time range for the entire week.

Showing or Hiding Columns in the View Schedules by Filters Section. The View

Schedules by Filters section has been enhanced with checkboxes corresponding to column names for the Daily view in the Schedule section, which enables you to show or hide columns.

Sorting Scheduler Entries. You can now sort schedules in ascending or descending order by clicking the desired column headers.

Changed Color of SSTO Icon. In order to better differentiate it from the BACnet Exceptions icon, the color of the SSTO icon has been changed to green.

Improved Standard Alarm Priority Display Previously, standard alarms displayed alarm priority levels as *A* only. With this revision, the alarm priorities have been enhanced to display levels from 1 through 6; for instance, A1-A6. This applies to the following applications and reports: Alarm Bar Alarm Status APOGEE GO Report Builder and Report Viewer: Panel Point Definition, Panel Point Log, Panel

Trend Data Details, and System Activity Log reports System Activity Log

What’s New in Revision 3.11? Streamlined Scheduler Interface


Streamlined Scheduler Interface The following enhancements have been made to the Scheduler application: Ability to Rearrange and Resize Columns. In the Schedule section, you can now

resize and rearrange columns in the Daily, Weekly, and Replacement Days tabs. For the Timeline tab, you can only resize the columns. These changes are saved on a per-user basis.

New Detail View Section. The former Notes section has been expanded into a Detail View section, which, in addition to Notes, now contains Details, Objects, and Legend tabs. The Details and Objects tabs enable you to view details and objects linked to the selected schedule, and the Legend tab contains an explanatory list of the icons that display in the Schedule section.

New Timeline Column. The new Timeline column provides a visual representation

of a schedule's time range for a given day and enables you to see when different schedules within a day occur relative to each other, such as where and by how much they overlap. Hovering over a timeline shows the Schedule Name, Start Time, Stop Time, and Value as defined in the schedule.

New Timeline Tab. The Schedule section has been enhanced with a new Timeline

tab that displays a visual representation of the schedule's time range for the entire week.

What’s New in Revision 3.11? Support for Controller Mounted Operator Display (LCD Auto Login)


Changed Color of SSTO Icon. In order to better differentiate it from the BACnet Exceptions icon, the color of the SSTO icon has been changed to green.

Support for Controller Mounted Operator Display (LCD Auto Login) Support for auto-login of LCD Operator displays has been added to the User Accounts application in the following areas: Add, Copy, and Edit BLN Dialog Boxes. The Add, Copy, and Edit BLN dialog

boxes have been updated with an LCD Auto Login section, which allows you to set the BLN account as the auto-login account for LCD Operator displays. Only one account per BLN can be specified for auto-login, so specifying this account for auto-login will replace the previous selection.

What’s New in Revision 3.11? General Enhancements


BLN Account Tab. The BLN Account tab has been updated with a new LCD Auto Login column, which indicates if the account has been specified as the auto-login account for LCD Operator displays on the BLN.

General Enhancements This revision contains the following general enhancements:

SentinelLM License Codes New license codes are required when updating to Revision 3.11. The Insight Base (INCore) and Insight Advanced (INCmbo) SentinelLM licenses are version specific and must be updated from Revision 3.10, 3.9.1, or 3.9 in order to run Revision 3.11. This does not apply to any Insight option licenses you previously purchased. You must contact a Siemens Industry representative to obtain your new license codes. For more information, see the Starting the Software online help file by clicking the Getting Started link on the Online Documentation screen.

Shared License File with InfoCenter Software Because InfoCenter Revision 1.5 and later uses the same SentinelLM licensing method, both the InfoCenter software and the Insight software share a common location for the license file (lservrc) in \Program Files\Siemens\APOGEE\Common.

NOTE: In 64-bit operating systems, the license file is located in: \Program Files (x86)\Siemens\APOGEE\Common.

Installing an Insight Client workstation on a computer where InfoCenter Server 1.5 or later is already installed can result in the Insight Client workstation not functioning. In this situation, contact your Siemens Industry representative for more information.



NOTE: If you have InfoCenter Revision 1.5 or later installed on your system, you may see the following software option licenses:

InfoCenter Software Feature Feature Name

InfoCenter Suite Base ICBase 1.5

InfoCenter Suite Advanced ICAdv 1.5

InfoCenter OPC Client Option (128 Items) ICOPC128

InfoCenter OPC Client Option (512 Items) ICOPC512

InfoCenter OPC Client Option (2,048 Items) ICOPC2048

InfoCenter OPC Client Option (more than 2,048 Items) ICOPC64K

InfoCenter Suite Demonstration Software ICDEMO 1.5

Utility Cost Manager for InfoCenter Suite ICUCM 1.0

Existing Features The following Insight software option licenses do not require updating:

Existing Feature Feature Name

Alarm Issue Management (AIM) Option INAIM

APOGEE GO Base INAGBa

APOGEE GO Client INApGo

APOGEE GO Unlimited User License INAGUnl

Auto-Dial INAuDi

BACnet Client License INBaCt

BACnet Server License INBaSv

Compliance Support Option INCSO

Corel XML/JPG Export Tool INGRAX

Dynamic Plotter INDyPl

Enhanced Graphics Option INEGO

Insight for XLS-MXL INFIS

Insight for XLS-MXL Automation Option INBLN

Life Safety Option (ALS3) INALS3

Life Safety Option (MXL/FireFinder XLS) INXLS

LON Devices 8500-8999 INLON1



Existing Feature Feature Name



OPCServer/1000 Point INOPC1

OPCServer/5000 Point INOPC5

Program Editor INPrEd

Remote Notification Option INRENO

Schedule Reports INScRp

Soft Controller License INSC01

System Activity Log INSyAc

Terminal Services INTSrv

Text-To-Speech (ScanSoft) License INTTS

BACnet Cimetrics BACstac The following table outlines which Cimetrics BACstac versions are supported and shipped with the corresponding software revision.

NOTE: Only the current version of the Cimetrics BACstac is available on the installation media when shipped; no previous versions are included.

Revision BACstac Version BACstac Release Date

Revision 3.9 4.3-e 05/25/2006

Revision 3.9.1 4.3-m 10/01/2007

Revision 3.10 5.0-i 03/30/2009

Revision 3.11 6.0-g 03/25/2010

BACnet Testing Laboratories (BTL) Certification The software is BTL OWS certified. AWS certification is pending.

Windows Services Automatic Startup Type for Insight MonitorSvc Service. Previously, the Insight

MonitorSvc service's Startup Type was set to Manual. Because this service now plays a crucial role in the proper functioning of the software, its default Startup Type has been changed to Automatic.

What’s New in Revision 3.11? Enhancements to Applications


Enhancements to Applications

Alarm Bar Event Enrollment Object Display. The Alarm Bar application has been enhanced so

that the Event Enrollment and Referenced Object System Name or Name will display according to your User Account settings.

Alarm Status Event Enrollment Object Display. With Revision 3.11, the first line value in the

Point Name column has been changed to display the Referenced Object, and the Event Enrollment System Name or Name displays in the second line. The Event Enrollment and Referenced Object System Name or Name will display according to your User Account settings.

APOGEE GO Clicking Links in Graphics. Previously, APOGEE GO could freeze when you

clicked on links associated with graphics. This has been corrected. Event Enrollment Object Display. The Alarms and the Graphics applications in

APOGEE GO have been enhanced so that the Event Enrollment and Referenced Object System Name or Name will display according to your User Account settings.

Event Builder Import Button. An Import button has been added to the BACnet Command Object

dialog box. The Import button allows you to speed up the process of adding Action Text to the BACnet command object by importing the text from an existing State Text table.



Graphics Alarm Associated Graphic Link Memory Leak. With this revision, the memory leak

issue with Alarm Associated Graphic Links has been fixed. New Color Mapping Tab. The Associated Point Control dialog box has been

enhanced with a new Color Mapping tab, which allows you to assign colors to a Background element based on the value of an associated point.

Picture Control Property Dialog Box. The Picture Control Property dialog box has

been enhanced to display an informative message whenever the File Name of Image field is empty and ranges are assigned to it.

Updating of Controls for Event Enrollment Alarming. Previously, when defining a control--such as a Point Information Block--for Event Enrollment alarming, the control's data fields and color failed to update according to the alarm status of the point. With this revision, the update issue has been fixed.

Insight Backup Utility 4000 MB Limit Enforced. The Insight Backup Utility application now enforces a

4000 MB limit on the backup volume size.

Point Editor All States Display for Event Enrollment Object Change-of-State. In the BACnet

Event Enrollment Object Properties dialog box, the Value(s) fields for the change-of-state Event Type and Unsigned Property State Type now display all the states for the monitored point’s State Text Table values.



Remote Notification Option Order of Escalation List Changing. Previously, the order of the stages in an

Escalation List could change unexpectedly after the order was edited. This has been fixed.

Event Enrollment Object Display. The Remote Notification Option application has been enhanced so that the Event Enrollment and Referenced Object System Name or Name will display according to your User Account settings.

Report Builder/Viewer New Fields Added to the Point Data Sorter Report. The Point Data Sorter report

has been updated to include a number of previously unavailable fields.

System Activity Log Event Enrollment Object Display. The System Activity Log application has been

enhanced so that the Event Enrollment and Referenced Object System Name or Name will display according to your User Account settings.

Additional Data Logging for BACnet Alarms. For BACnet alarms, additional alarm information is now available in their associated System Activity Log entries, which includes Notification Type (alarm, event or Ack), Notification Class, Event Values (alarm and event), and Ack Required.

System Profile Ethernet Panels with Low Memory Coldstarting. In previous revisions, replication

issues with State Text Tables could cause Ethernet-based panels with low memory to coldstart. With the current revision, the replication issues have been corrected.



Support for Unitary Equipment Controller (UEC) on MS/TP. In the System Tree, you can now define UECs on MS/TP FLNs and BLNs.

Support for Point Pickup Modules (PPM). In the System Tree, you can now define PPMs on MS/TP FLNs and P1 FLNs.

Support for COMPACT I/O Point Counts. In the field panel definition dialog boxes and the BACnet FLN Device Definition dialog box, you can specify I/O point counts for COMPACT panels with the new Point Count field. In the BACnet Field Panel Definition and BACnet FLN Device Definition dialog boxes, you can also use the UEC check box to indicate whether a device is a Unitary Equipment Controller (UEC).

All States Display for Event Enrollment Object Change-of-State. In the BACnet

Event Enrollment Object Properties dialog box, the Value(s) fields for the change-of-state Event Type and Unsigned Property State Type now display all the states for the monitored point’s State Text Table values.



Trend Editor Trend Log Objects for Third-party BACnet Devices. You can now create trend log

objects for third-party BACnet devices from the New menu. New Delete Trend Log Objects Menu Item. The Tools menu has been enhanced

with the Delete Trend Log Objects menu item which allows you to delete trend log objects for third-party BACnet devices.

New Trend Log Objects Window. The Trend Editor application has been enhanced with a Trend Log Objects window which displays all the trend log objects for the selected third-party BACnet device.

Issued by Siemens Industry, Inc. Building Technologies Division 1000 Deerfield Parkway Buffalo Grove, IL 60089, USA Tel. +1 847-215-1000

© 2010 Copyright Siemens Industry, Inc. Technical specifications and availability subject to change without notice.

Document ID 125-3160-311 Edition

Insight Release Notes

Documents

unitary equipment

energy performance

user account

streamlined

trend log

insight client

bacnet exceptions

online documentation