This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
MITUTOYO - INSIDE MEASURING INSTRUMENTS
INSIDE MEASURING INSTRUMENTSInside Micrometers - Series 345, 145 N-2,3Inside Micrometers - Series 141 - Interchangeable Type N-4.5Tubular Inside Micrometers - Series 337, 137 - Extension Type N-6, 7Tubular Inside Micrometers - Series 339, 139, 140 - Heavy Duty Type N-8, 9Tubular Inside Micrometers - Series 133 N-10,11Digimatic Bore Gages - Series 511 N-12,13Dial Bore Gages - Series 526 - Split-Ball Type N-14,15Dial Bore Gages - Series 511 N-16,17Dial Bore Gages with Micrometer Heads - Series 511 N-18,19Dial Bore Gages - Series 511 - For Shallow Holes N-20Holtests - Series 368 - Two Point Models N-21,22Holtests - Series 368 - Interchangeable Anvil Type N-23~25Digimatic Holtests - Series 468 - Complete Unit Sets N-26~29Dial Bore Gages - Series 545 - Rugged, Production-Line Tools N-30Borematic with Absolute Encoder - Series 568 N-31,32Setting Rings - Series 177 N-33MSG/MLS Air Gaging Models N-34Chamfer Chek - Series 526 N-35Digimatic Chamfer Chek - Series 547 N-36Hole Chek - Series 526 - Instant Dia. Meas. of Small Holes N-37
4841 W. Chicago Ave. • Chicago, IL 60651 • Ph: 773.261.2182 • Fax: 773.261.2867 • [email protected]
Precision Measuring Equipment and Industrial Supplies since 1924.www.jwdonchin.com
INSIDE MICROMETERS
N-2
Inside MicrometersSeries 345, 145
Features• Accuracy to .0002" with graduations of .001".• Easy zero adjustment.• Clear graduations on satin-chrome finish.• Caliper type jaws are made of high-grade, tool steel.
They are satin-chrome finished.• Locking clamp for positive locking of spindle.• With ratchet thimble for constant force.
• Every thousandth is numbered for easy reading.• Easily adjusted for slide movement of jaw (Exclusive.)• Spanner wrench is supplied with every micrometer.• Complete with fitted carrying case.• Digimatic type features LCD Readout, Preset,
Zero/ABS, Data/Hold, Inch/mm and SPC Output.
145-187
145-193
345-711-30
145-193300400 Holder
300401 Cap
A special holder is available for inside microme-ters.The holder must be used with No.156-101MITUTOYO Stand or any other similar stand orvise available in the shop.
SpecificationsDigimatic Inside Micrometers with Absolute EncoderInch/Metric
LCDOrder No. Range Resolution Accuracy Remarks345-711-30 .2"–1.18" .00005" ±.0002" with SPC output
5–30mm 0.001mm345-712-30 1.0"–2.0" .00005" ±.00025" with SPC output
25.4-50.8mm 0.001mm
MetricOrder No. Range Resolution Accuracy Remarks345-511-30 5–30mm 0.001mm ±0.005mm with SPC output345-512-30 25–50mm 0.001mm ±0.006mm with SPC outputNote: Metric only Digimatic models have mm thimble and no inch/mm conversion function.For SPC output order Connecting Cable 937387 (1m) or 965013 (2m). Replacement Battery: 541980 (1pc), 541980-10 (10pcs/SET).
Inside MicrometersSeries 141 – Interchangeable Type
141-233141-101
141-102
The 141 Series Inside Micrometers are probably the mostfrequently used inside measuring instruments because oftheir wide range and simplicity in measuring operation.No. 141-233, (photo shown), consists of 5 interchangeablerods, .500" micrometer head, .500" collar 1" extensionand handle. The range covered by this unit is 2" to 12".
To provide point contact, all contact points are madespherical and hardened for extra long tool life. The overallaccuracy is .0004" up to 12" (300mm), .001" thereafter to40".
Features• Each interchangeable rod is marked with its measuring
range.• Both micrometer head and furnished rods are satin-
chrome finished throughout.• Positive locking clamp attached on No. 141-101 and
141-102. No lock on the larger sizes.• Supplied with fitted carrying case.For closer tolerance work it is recommended that themicrometer with a rod inserted be calibrated with aknown size such as a ring gage. The setting ring for“Holtest” would be an ideal choice.No. 141-102As shown here, the Micrometer Head has a 0–.250"range, reading in thousandths. A detachable holder pro-vides easy access when measuring inside diameterswithin deep holes. For 1" to 1.250" range, the micrometer
is used without the rod or collar.For 1.250" to 1.500" a .250" collar is added between therod and head. For 1.500" to 1.750" range, the rod isreplaced. For 1.750" to 2", the collar is added betweenthe rod and head. Thus, it measures 1" to 2"–.250" at atime.No. 141-233Since this Inside Micrometer comes with a .500" rangeMicrometer Head, the combining of rod, collar andextended thimble is made simpler. For instance: the rodmarked 4–6" measures from 4"–4.5". For 4.5–5" range,the .500 collar is added. For 5"–5.5" the extension thim-ble is used and for 5.5" to 6" the extension thimble andcollar are used.Both measuring ends are hardened and have micro-lapped finish for lasting accuracy.
INSIDE MICROMETERS
N-4
N- 04 (2003) full size 12/8/03 7: 22 PM Page 1
1.71" (43.5)
.07"(1.8)
.05"(1.2)
.24"(6.2)
(METRIC)
ø.16" (ø4) hole
ø.47
"(ø
12)
ø.59
"(ø
15)
ø.2"
(ø15
)
.35"
(8.8
).4
5"(1
1.5)
SR .39"(SR10)
ø.26
"(ø
6.5)
.54"(13.7)
.91"(23)
.2"(5)
SpecificationsInside Micrometers—Interchangeable Rod TypeInch
Spacing DiameterOrder No. Range Collar of Rods Remarks141-102 1–2" .250" .248" Includes 141-002 and 2 pcs rods141-208 2–8" .500" .248" Includes 141-026, 3 rods and 1" extended thimble141-233 2–12" .500" .248" Includes 141-026, 5 rods and 1" extended thimble141-121 8–20" 1", 2" .355" Includes 141-010 and 3 pcs rods141-122 8–40" 1", 2" .355" Includes 141-010 and 8 pcs rods
MetricSpacing Diameter
Order No. Range Collar of Rods Remarks141-101 25–50mm 6.0mm 6.3mm Includes 141-001 and 2 pcs rods141-205 50–200mm 12.0mm 6.3mm Includes 141-025, 3 rods and 25mm extended thimble141-206 50–300mm 12.0mm 6.3mm Includes 141-025, 5 rods and 25mm extended thimble141-117 200–500mm 25mm, 50mm 9.0mm Includes 141-009 and 3 pcs rods141-118 200–1000mm 25mm, 50mm 9.0mm Includes 141-009 and 8 pcs rods
Tubular Inside MicrometersSeries 337, 137 – Extension Type
Features• Wide range of ID measurements by combining
extension rods with the micrometer head. The rod is accurately finished and incorporated in a pipe forshop-floor use.
• The 337 series provides digital readout to.0001"/0.001mm and can be linked to the SPC System.
• Digimatic Function Include:PresetInch/mm conversionZero-Set/ABSHold Data Output
• Power Supply:One Silver oxide cell (SR-44), offers 4,500 hours of life
• The display automatically turns off if idle after 20 minutes.
Accuracy• Series 137, 337:[±(.00015+.00005n+.00005 (L/2))"]*/±(3+n+L/50)µm *n=Number of rods, L=Maximum measuring length [(inch)] (mm),Fraction rounded up
• Power Supply: One silver oxide cell (SR-44) offers 4,500 hours of life
• The display automatically turns off idle after 20 minutes
Accuracy• Series 139, 339:[±(.00015+.00005n+.00005 (L/2))"]/±(3+n+L/50)µm*• Series 140:[±.(0003+.00005n+.00005 (L/2))"]/±(7+n+L/50)µm**n=Number of rods, L=Maximum measuring length [(inch)] (mm),Fraction rounded up
339-293 139-179
SpecificationsTubular Inside MicrometersInch
Diameter ExtensionOrder No. Range of Rods Rods Remarks139-201 1.5–12" .375" .5", 1", 2", 2.5", 3", 3.5", 4", 6" Include 139-004139-202 4–40" .375" 1", 2", 3", 6", 9", 12", 14", 16", 17", 18" Include 139-006
• Optional stand (215-120) for Bore Gages Series 526 is available for efficient measurement of multiple small holes.
Optional Stand(215-120M)526-120
526-173P
robe
Dep
th (
L)
SpecificationsDial Bore GagesInchOrder No.* Order No. Order No. Measuring Number of ProbeWithout Dial With 2922FB With 2923FB-10 Range Anvils DepthGage Graduation .0005" Graduation .0001"
526-103 526-119 526-122 .3"-.4" 6 pcs. 2.2"526-104 526-120 526-123 .4"-.7" 8 pcs. 2.4"*Does not include dial gage cover.
MetricOrder No.* Order No. Order No. Measuring Number of ProbeWithout Dial With 2046FB With 2109FB Range Anvils DepthGage Graduation 0.01mm Graduation .0.001mm
526-101 526-126 526-124 7-10mm 6 pcs. 56mm526-102 526-127 526-125 10-18mm 8 pcs. 62mm*Does not include dial gage cover.
N-14
BORE GAGES
N- 14 (2003) full size 12/8/03 7: 23 PM Page 1
SpecificationsDial Bore GagesSplit-Ball TypeInchOrder No.* Order No. with Measuring Anvil Setting Ring No. ofWithout 2923FB-10 Range Probe Range Length Code No. Size NeedleDial Gage Graduation .0001" No.
MetricOrder No.* Order No. with Order No. with Measuring Anvil Setting Ring No. ofWithout 2046FB 2109FB Range Probe Range Length Code Size NeedleDial Gage Graduation Graduation No. (mm) No. (mm)
Optional AccessoriesExtension RodsBore Gage Extension LengthMeasuring 4.92" 9.84" 19.69" 29.53" 39.37" Rod SpannerRange 125mm 250mm 500mm 750mm 1000mm Diameter.7–1.4" 953549 953550 953551 –– –– .34" 102148A18–35mm 8.7mm1.4–6.5" 953552 953553 953554 953555 953556 .47" 21255635–160mm 12mm6.5–16" 953557 952361 953558 953559 953560 .59" 212556160–400mm 15mmNote: Above list is used for 511-1XX series; not available for 511-2XX Series.
N-17
BORE GAGES
N- 17 (2003) full size 12/8/03 7: 29 PM Page 1
Dial Bore Gages with Micrometer HeadsSeries 511
Features• Interchangeable anvil is attached to a micrometer head
for accurate dimensional setting.• Carbide ball contact point for durability.• Measuring range can be expanded by attaching a
sub-anvil.
• Optional extension rods can be attached.• A Digimatic Indicator can be attached in place of the
dial gage.• Accuracy: .0002"/5µm
511-319
Ring gages offer the bestmethod of zero setting DialBore Gages.
Pro
be D
epth
Extension Rod
N-18
BORE GAGES
N- 18 (2003) full size 12/8/03 7: 31 PM Page 1
Optional AccessoriesExtension RodsBore Gage Extension LengthMeasuring 4.92" 9.84" 19.69" 29.53" 39.37" Rod SpannerRange 125mm 250mm 500mm 750mm 1000mm Diameter1.4-2.5" 953549 953550 953551 –– –– .34" 102148A35–60mm 8.7mm2.4–6.4" 953552 953553 953554 953555 953556 .47" 21255660–160mm 12mm6.0–32.0" 953557 952361 953558 953559 953560 .59" 212556150–800mm 15mmNote: Above list is used for 511-3XX Series.
SpecificationsDial Bore Gages with Micrometer Heads InchOrder No.* Order No. Order No. Measuring Mike Head Extensions ProbeWithout With 2922FB With 2923FB-10 Range Travel Mike Head DepthDial Gage Graduation .0005" Graduation .0001"511-342 511-345 511-346 1.4-2.5" .2" .2", .4", .6", .8" 6"511-332 511-335 511-336 2.4-4.0" .4" .4", .8" 6"511-306 511-325 511-326 4.0-6.0" .5" .4", .8", .8" 6"511-307 511-319 511-320 6.0-10.0" 1" 1", 2" 10"511-308 511-321 511-322 10.0-16.0" 2" 2", 2" 10"511-309 511-323 511-324 16.0-24.0" 2" 2", 4" 10"511-310 511-329 511-330 24.0-32.0" 2" 2", 4" 10"*Does not include dial gage cover.
MetricOrder No.* Order No. Order No. Measuring Mike Head Extensions ProbeWithout With 2046FB With 2109FB Range Travel Mike Head DepthDial Gage Graduation 0.01mm Graduation 0.001mm511-341 511-344 511-343 35-60mm 5mm 5mm, 10mm
SpecificationsDial Bore GagesInchOrder No.* Order No. Order No. Measuring Number of Number ofWithout Dial With 2922FB With 2923FB-10 Range Anvils SpacersGage Graduation .0005" Graduation .0001"
MetricOrder No.* Order No. Order No. Measuring Number of Number ofWithout Dial With 2046FB With 2109FB Range Anvils SpacersGage Graduation 0.01mm Graduation 0.001mm
511-401 511-411 511-421 15-35mm 11 pcs., 10mm Sub-anvil 1511-402 511-412 511-422 35-60mm 6 pcs. 4511-403 511-413 511-423 50-100mm 11 pcs. 4511-404 511-414 511-424 50-150mm 11 pcs., 50mm Sub-anvil 4*Does not include dial gage cover.Extension rods are not available for 511-4XX Series.
Dial Bore GagesSeries 511
For Shallow Holes
Features• Can measure ID at position close to the bottom of
blind holes.• A Digimatic Indicator can be attached in place of the
dial gage.• Accuracy: .0002"/5µm
511-431 511-442
Pro
be D
epth
6" (
150m
m)
N-20
BORE GAGES
N- 20 (2003) full size 12/8/03 7: 16 PM Page 1
HoltestsSeries 368 – Two Point Models for Very Small Holes
SpecificationsHoltests–Two Point ModelsInch
Individual AccessoriesSet Order No. Range Order No. Grad. L1 L2 Included In Set
To read ID’s to .0001" directly, the probe movement isdesigned to assure consistent accuracy over the entirerange. The probe movement fixes one side of the probeand allows the other half of the probe to move parallelto the stationary side. With this new design and the leaf-spring mechanism, these Holtests are, by far, the mostdirect and accurate instruments to check small holediameters.
368-022
368-023
368-024
368-025
AccuracyInch Type .00008"Metric Type 0.002mm
Measuring Force (per Anvil)4–20N
HOLTESTS
N-21
N- 21 (2003) full size 12/8/03 7: 17 PM Page 1
Holtests Series 368
SpecificationsHoltest
Inch with CarbideSet Individual AccessoriesOrder No. Range Order No. Graduation L1 L2 included in Set
.275–.350" 368-201 .0001" 2.32" 4.05"~4.13"177-179 Setting Ring .350" DIA.
368-921 .350–.425" 368-202 .0001" 2.32" 4.05"~4.13"177-180 Setting Ring .500" DIA.
These Holtests are versatile, three-pointinternal micrometers for the accurate andefficient direct-measurement of internaldiameters. Three anvils, evenly spaced at 120° apart, contact the internal wall sur-faces and find true alignment with the axisof the bore for accurate ID measurement.
Features• Measurement can be taken nearly up to
the bottom of the bore.• Highly durable because of carbide tipped
contact points.• Can measure deep holes using an exten-
sion rod which is available on modelsover 6mm measuring range.
• Ratchet stop for constant measuringforce.
368-201
368-103
Extension Rods (optional)Application range
Inch Metric Order No. Length.275–.5" 6–12mm 952322 3.94"(100mm)
Larger Holtests are sold individually.No set available.
HOLTESTS
N-25
N- 25 (2003) full size 12/8/03 7: 25 PM Page 1
Digimatic HoltestsSeries 468
Range A.275–.5"/6–12mm .079"/2mm.5"–4"/12-100mm .012"/0.3mm
4–12"/100–300mm .512"/13mm
The Digimatic Holtest is a three-point internal micrometerwith digital display (LCD).Functions include:Zero-setting, Preset, Data Hold, Inch/mm conversion,Error alarm, Data output.
Features• Efficient measurement using two measurement
modes—ABS (absolute) and INC (incremental) modes.• The 468 series provides digital readout to
.0001"/0.001mm and can be linked to the M-SPC(Mitutoyo Statistical Process Control) system.
• Battery: SR44 x 1 (541980)
• Measurement can be taken nearly up to the bottom ofthe bore.
• The display automatically turns off idle after 20 minutes.• Can measure deep holes by attaching an extension rod
* Two sets of interchangeable contact points are provided.For SPC output order connecting cable 937387(40"/1m) or 965013(80"/2m).
AB
SOLUTE
TECHNOLOGY
BOREMATIC
N-31
N- 31 (2003) full size 12/8/03 7: 17 PM Page 1
Borematic with Absolute Encoder Series 568
568-988
Optional Extension Rods forMeasuring Deep Bores
Order No. Length Remarks952322 3.94"(100mm) for .275–.5" gages952621 5.9"(150mm) for .5–.8" gages952622 5.9"(150mm) for .8–2" gages952623 5.9"(150mm) for 2"–5" gages
RS232C 1 standard (optional to 2 maximum) 1 standardRJ485 optional (2x) 2 standardUSB optional N/AOpto I/O standard standardEthernet standard N/A
Program switch Connector standard standardPrinter Port optional optional
The MSG model column is fully configurable to any air electronic application. Unit can act as master or slave in control feedback environment. Display graphics are also configurable to your specific requirements. Please contact Mitutoyo AmericaCorporation representatives for further information.The MLS model is offered as a limited measurement purpose device using a single air and two LVDT channels. LVDT's are 5pin, half bridge style.Mitutoyo also offers a complete line of air gage tooling to support our columns as well as the capability to supply tooling andmasters in many configurations for most competitive brands. In addition we can ship all gages with a long form certificationfrom our calibration labs.
N- 34 (2003) full size 12/8/03 7: 24 PM Page 1
Chamfer ChekSeries 526 – I.D. Measures the top diameter of tapered holes and chamfers
O.D. measures the minor end diameter of tapered conical parts
Features• Ease of operation: Simply insert the steel plunger into the
hole, press firmly against the part and read the diameterdirectly to three decimal places.
• Resolution: Reads directly to .001" for 0°–90° models.• Applications: Steel valve inserts, brass fittings, machine
tools and holders, steel check valves, circuit boards,sheet metal and stampings, pressure vessels, bronzebushings, steel governor cups.
Standard AccessoriesBlack Leather Case: (21BZA778) 9.7"(W) x 2"(D) x 6.1"(H)*Wooden Box: (21BZA779) 12.8"(W) x 5.1"(D) x 3.63"(H)
*526-006C (CI-2090) onlyMaster Plate: (64AAA012) 3"(W) x 2"(D) x .925"(H)
Optional AccessoriesSetting MasterOrder No. Model No. DiameterChamfer Chek I.D.64AAA007 SM-1000 *.375"/.750" (I.D.)64AAA008 SM-2000 *1.25"/1.75" (I.D.)64AAA133 9.525mm (I.D.)64AAA134 19.05mm (I.D.)Chamfer Chek O.D.64AAA009 SM-1000E *.375"/.750" (O.D.)*Denotes a double-sided setting master.
Order No. Model No. Diameter RangeChamfer Chek I.D.526-005C CI-1090 .02–1"526-006C CI-2090** 1–2"526-005M CI-1090M 0.5–25mmChamfer Chek O.D.526-007C CO-0590 1/8–1/2"526-008C CO-1090 3/8–1"
526-005C 526-008C
526-005C shown with optional setting master.
I.D. O.D.
CHAMFER-CHEK
N-35
N- 35 (2003) full size 12/8/03 7: 26 PM Page 1
Digimatic Chamfer ChekSeries 547 – I.D. Measures the top diameter of tapered holes and chamfers
O.D. measures the minor end diameter of tapered conical parts
Standard AccessoriesMaster Plate (64AAA012 ), 3"(W) x 2"(D) x .925"(H)Black Leather Case (21BZA778 ) 9.7"(W) x 2"(D) x 6.1"(H)*Wooden box (21BZA779 ) 12.8"(W) x 5.1"(D) x 3.63"(H)* 547-481 (DC1-2090) only
Digimatic Chamfer ChekOrder No. Model No. Diameter Range Resolution Accuracy MassChamfer Chek I.D.547-480 DCI-1090 .02-1"/0.5-25.4mm .0005"/0.01mm ±.001"/0.025mm 1.75lbs./793g547-481 DCI-2090 1-2"/25.4-50.8mm .0005"/0.01mm ±.001"/0.025mm 3.97lbs./1,800gChamfer Chek O.D.547-482 DCO-0590 1/8"-1/2"/3.18-12.7mm .0005"/0.01mm ±.001"/0.025mm 1.75lbs./793g547-483 DCO-1090 3/8"-1"/9.52-25.4mm .0005"/0.01mm ±.001"/0.025mm 1.75lbs./793gFor SPC output order Connecting Cable 905338 (40"/1m) or 905409 (80"/2m).
547-480 547-482
547-480 Shown with optional setting master.
I.D. O.D.
CHAMFER-CHEK
N-36
N- 36 (2003) full size 12/8/03 7: 28 PM Page 1
Hole Chek Series 526 – Instant Diameter Measurement of Small Holes
Features• Ease of Operation: Simply insert the steel plunger into
the hole and press firmly against the part and read thediameter directly to three decimal places.
• Resolution: Reads directly in .001" diameter incre-ments.