254 INSERT SHAPER CUTTERS Rabbeting Profiling Door GROOVING Jointing Lamello ® Profile Pro™ Making Insert Shaper Cutters t B d D INSERT GROOVING CUTTER WITH SCORER 4-6MM ØD B Teeth E Tool No. Ød Max. t RPM Repl. T.C. Knife 160(6-5/16") 4.0-7.5(5/32-19/64") 8+4 6.35(1/4") 61350 1-1/4" 30(1-3/16") 4,800-8,300 RCK-18 RCK-71 180(7-1/16") 4.0-7.5(5/32-19/64") 8+4 6.35(1/4") 61352 1-1/4" 40(1-1/2") 4,300-7,500 RCK-18 RCK-71 INSERT ADJUSTABLE GROOVING CUTTER WITH SCORER 4-7.5MM Hard wearing steel body complete with tungsten carbide knives & scorer for improved finish. Suitable for producing various thickness grooves and slots in softwood, hardwood and man-made boards (with or without coating) on a spindle molder. Cutting width can be adjusted in 0.1mm steps by using supplied spacer rings. B D d t E ØD B Teeth Tool No. Ød Max. t RPM Repl. T.C. Knife 150(5-7/8") 4.0-15.5(5/32"-5/8") 2+4+4 61354 1-1/4" 45(1-3/4") 5,500-8,500 AMA-17 RCK-18 RCK-71 3 PART INSERT ADJUSTABLE GROOVING CUTTER WITH SCORER 4-15.5MM Hard wearing steel body complete with tungsten carbide knives and scorer for improved finish. Suitable for producing various thickness grooves and slots in softwood, hardwood and man-made boards (with or without coating) on a spindle molder. Cutting width can be adjusted in 0.1mm steps by using supplied spacer rings. D d t B For a complete replacement parts listing for the above cutters please refer to our website: www.amanatool.com Illustrations not shown actual size. To print 1:1 wood samples visit www.amanatool.com. Hard wearing steel body complete with tungsten carbide knives and scorer for improved finish. Suitable for producing grooves and slots in softwood, hardwood and man-made boards (with or without coating) on a spindle molder. Can be used with spacer rings for comb jointing. ØD B Teeth Ød Tool No. Max. t RPM Repl. T.C. Knife 125(5") 4(5/32") 4+4 1-1/4" 61451 35(1-3/8") 6,100-10,500 RCK-18 RCK-71 125(5") 5(3/16") 4+4 1-1/4" 61453 35(1-3/8") 6,100-10,500 RCK-19 RCK-71 125(5") 6(15/64") 4+4 1-1/4" 61454 35(1-3/8") 6,100-10,500 RCK-33 RCK-71 125(5") (1/4") 4+4 1-1/4" 61466 35(1-3/8") 6,100-10,500 RCK-33 RCK-71 150(5-7/8") 4(5/32") 4+4 1-1/4" 61455 45(1-3/4") 5,200-8,900 RCK-18 RCK-71 150(5-7/8") 5(3/16") 4+4 1-1/4" 61456 45(1-3/4") 5,200-8,900 RCK-19 RCK-71 150(5-7/8") 6(15/64") 4+4 1-1/4" 61457 45(1-3/4") 5,200-8,900 RCK-33 RCK-71 180(7-1/16") 4(5/32") 8+8 1-1/4" 61458 55(2-5/32") 4,200-7,200 RCK-18 RCK-71 180(7-1/16") 5(3/16") 8+8 1-1/4" 61459 55(2-5/32") 4,200-7,200 RCK-19 RCK-71 180(7-1/16") 6(15/64") 8+8 1-1/4" 61461 55(2-5/32") 4,200-7,200 RCK-33 RCK-71
29
Embed
Insert Shaper Cutters - General Cutting Tools · INSERT SHAPER CUTTERS ... Hard wearing steel body complete with tungsten carbide knives and scorer for improved finish. Suitable for
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
254
INSE
RT S
HAPE
R CU
TTER
SRabbeting Profiling Door GROOVING Jointing Lamello® Profile Pro™
INSERT ADJUSTABLE GROOVING CUTTER WITH SCORER 4-7.5MMHard wearing steel body complete withtungsten carbide knives & scorer for improvedfinish. Suitable for producing various thicknessgrooves and slots in softwood, hardwood andman-made boards (with or without coating) on a spindle molder. Cutting width can be adjustedin 0.1mm steps by using supplied spacer rings.
3 PART INSERT ADJUSTABLE GROOVINGCUTTER WITH SCORER 4-15.5MMHard wearing steel body complete withtungsten carbide knives and scorer forimproved finish. Suitable for producingvarious thickness grooves and slots insoftwood, hardwood and man-made boards(with or without coating) on a spindle molder.Cutting width can be adjusted in 0.1mmsteps by using supplied spacer rings. D
d
t
B
For a complete replacement parts listing for the above cutters please refer to our website: www.amanatool.comIllustrations not shown actual size. To print 1:1 wood samples visit www.amanatool.com.
Hard wearing steel body complete withtungsten carbide knives and scorer forimproved finish. Suitable for producinggrooves and slots in softwood, hardwoodand man-made boards (with or withoutcoating) on a spindle molder. Can be usedwith spacer rings for comb jointing.
Hard wearing steel body complete withtungsten carbide knives and scorer forimproved finish. Suitable for producingvarious thickness grooves and slots insoftwood, hardwood and man-made boards(with or without coating) on a spindle molder.Cutting width can be adjusted in 0.1mmsteps by special threaded bushing and scalewithout removing the cutter from the spindle.
For a complete replacement parts listing for the above cutters please refer to our website: www.amanatool.comIllustrations not shown actual size. To print 1:1 wood samples visit www.amanatool.com.
Hard wearing steel body complete withtungsten carbide knives and scorer forimproved finish. Suitable for producinggrooves and slots in softwood, hardwoodand man-made boards (with or withoutcoating) on a spindle molder.
d
t
B
D
WITH SCORER AND RING NUT 8-24MM
WITH SCORER AND RING NUT 4-7.5MM
2007InsertShaping_253-258.qxd 5/30/07 10:33 AM Page 255
256
INSE
RT S
HAPE
R CU
TTER
SRabbeting Profiling Door GROOVING Jointing Lamello® Profile Pro™
Making
InsertShaper Cutters
INTERMEDIATE STACKABLE CUTTER7MM, 15MM AND 20MM KERFS
Expand the range of the shim-type adjustable groovers with theseintermediate cutters. Works like a stackable dado set: sandwich oneor more of the intermediate cutters between a pair of the groovers(model #’s 61350, 61360, 61362). Find the coarse groove width bystacking the appropriate selection of cutters on the shaper spindle,and fine-tune the width by shimming the outside groovers.
Hard wearing steel body complete with tungstencarbide knives and scorer for improved finish.Suitable for producing various thickness groovesand slots in softwood, hardwood and man-madeboards (with or without coating) on a spindlemolder. Cutting width can be adjusted in 0.1mmsteps by using supplied spacer rings.
d
B
t
D
For a complete replacement parts listing for the above cutters please refer to our website: www.amanatool.comIllustrations not shown actual size. To print 1:1 wood samples visit www.amanatool.com.
D
d
B
t
INSERT ADJUSTABLE GROOVING ANDRABBETING CUTTER WITH SCORER 20.6-100MMHard wearing steel body complete withtungsten carbide knives & scorer forimproved finish. Suitable for producingvarious thickness grooves and rabbets insoftwood, hardwood and man-made boards(with or without coating) on a spindle molder.Cutting width can be adjusted in 0.1mmsteps by using supplied spacer rings. d
2007InsertShaping_253-258.qxd 5/30/07 10:33 AM Page 256
257
INSERT SHAPER CUTTERSRABBETING Profiling Door Grooving Jointing Lamello® Profile Pro™
Making
InsertShaper Cutters
For a complete replacement parts listing for the above cutters please refer to our website: www.amanatool.comIllustrations not shown actual size. To print 1:1 wood samples visit www.amanatool.com.
CARBIDE TIPPED ADJUSTABLE GROOVING ANDRABBETING CUTTERS WITH SCORER 25-49.5MM
ØD B Teeth Tool No. Ød Max. t RPM150(5-7/8") 25.0-49.5(1"-1-15/16") 4+4 61367 1-1/4" 27(1-1/16") 5,200-9,000
B
d
t
D
Hard wearing steel body complete with tungstencarbide knives and scorer for improved finish.Suitable for producing various thickness grooves andrabbets in softwood, hardwood and man-madeboards (with or without coating) on a spindle molder.Cutting width can be adjusted in 0.1mm steps byusing supplied spacer rings.
d
B
t
D
INSERT SHEARRABBETING CUTTER
Cutterhead bodies available in hard wearingaluminum or steel, complete with shear angletungsten carbide knives and scorer. Suitable forproducing various thickness rabbets insoftwood, hardwood and man-made boards(with or without coating) on a spindle molder.Shear angle reduces tear out and improvesquality of cut.
*Aluminum
INSERT RABBETING CUTTER
Cutterhead bodies available in hard wearingaluminum or steel, complete with tungstencarbide knives and scorer for improved finish.Suitable for producing various thickness rabbetsin softwood, hardwood and man-made boards(with or without coating) on a spindle molder.
2007InsertShaping_253-258.qxd 5/30/07 10:33 AM Page 257
258
INSE
RT S
HAPE
R CU
TTER
SInsertShaper Cutters PLANING Profiling Door Grooving Jointing Lamello® Profile Pro™
Making
For a complete replacement parts listing for the above cutters please refer to our website: www.amanatool.comIllustrations not shown actual size. To print 1:1 wood samples visit www.amanatool.com.
d
B
D
d
B
D
INSERT JOINTING CUTTER
Hard wearing aluminum body complete withpositioned tungsten carbide knives. Suitablefor planing and jointing in softwood,hardwood and man-made boards on a spindlemolder. Can be used with a bearing guide andring fence for planing and routing curved workpieces with a template.
INSERT SPIRAL JOINTING CUTTER
d
B
D
For sanding rough workpieces by means oftemplate under use of a ball bearing as a rub collar.
Hard wearing aluminum body complete with spiral positioned tungstencarbide knives. Suitable for planing and jointing in softwood, hardwood andman-made boards on a spindle molder. Can be used with a bearing guideand ring fence for planing and routing curved work pieces with a template.
2007InsertShaping_253-258.qxd 5/30/07 10:34 AM Page 258
259Illustrations not shown actual size. To print 1:1 wood samples visit www.amanatool.com.
INSERT SHAPER CUTTERSInsertShaper Cutters
For a complete replacement parts listing for the above cutters please refer to our website: www.amanatool.com
INSERT ADJUSTABLE CHAMFER CUTTERCutterhead bodies available in hard wearingaluminum or steel, complete with tungstencarbide knives. Suitable for producing chamfercuts at various angles in softwood, hardwoodand man-made boards on a spindle molder.Cutting angle can be adjusted in 7.5˚ steps byusing notched scale. Fine adjustment of 1˚ isalso possible.
d
B
D
R
ø100
d
B
D
R
Hard wearing aluminum body complete with tungstencarbide knives. Suitable for rounding over softwood,hardwood and man-made boards on a spindle molder.Can be used with 100mm diameter bearing forshaping work.
260Illustrations not shown actual size. To print 1:1 wood samples visit www.amanatool.com.
INSE
RT S
HAPE
R CU
TTER
SRabbeting PROFILING Door Grooving Jointing Lamello® Profile Pro™
Making
InsertShaper Cutters
For a complete replacement parts listing for the above cutters please refer to our website: www.amanatool.com
Cutterhead body in hard wearing aluminumcomplete with tungsten carbide knives.Suitable for producing beads of various radiiin softwood, hardwood and man-madeboards on a spindle molder.
Dd
BR B1
INSERT RADIUS PROFILE CUTTERCutterhead bodies in hard wearing aluminumor steel, complete with tungsten carbideknives. Suitable for producing various radiicoves or rule joints in softwood, hardwood andman-made boards on a spindle molder. Allcutterheads can be used with a 120mmbearing for cutting uniform depth profiles.
d
t
D
B
t
dD
B
R
INSERT BEADING PROFILE CUTTER
ØD B R Ød Tool No. Max. t RPM Repl. T.C. Knife Rub Collar126(5") 6(1/4") 3(1/8") 1-1/4" 61160 28(1-1/8") 4,500-10,600 RCK-121 61619
2007InsertShaping_259-264.qxd 5/30/07 11:10 AM Page 260
261
INSERT SHAPER CUTTERSRabbeting PROFILING Door Grooving Jointing Lamello® Profile Pro™
Making
InsertShaper Cutters
For a complete replacement parts listing for the above cutters please refer to our website: www.amanatool.com
MULTI PROFILE CUTTERAluminum alloy heads with specialmulti-radii replaceable carbide knives. Avery versatile cutter for moldings suchas beads, corner rounds, classical or acombination of each. Multiple passesand depth settings will give even furthercombinations. Two different sizesavailable. Standard bore is 1-1/4".Includes 3mm T-Handle hex key.
R 4.8mm
R 4.5mm
R 7mm40mm
16mm
R 7
25mm
R 6mm
R 8mm
R 10mm50mm
7˚
RCK-86
d
B
D
INSERT CORNER ROUND/COVE CUTTER Cutterhead body in hard wearingaluminum, complete with tungstencarbide knives. Suitable for roundingover and producing matching covejoints in softwood, hardwood andman-made boards on a spindlemolder. All cutterheads can be usedwith a 100mm bearing for cuttinguniform depth profiles. d
B
D
R
R
Bearing can be placed above or below thecutter to produce the required profile.
2007InsertShaping_259-264.qxd 5/30/07 11:10 AM Page 261
INSE
RT S
HAPE
R CU
TTER
SRabbeting PROFILING Door Grooving Jointing Lamello® Profile Pro™
Making
InsertShaper Cutters
262Illustrations not shown actual size. To print 1:1 wood samples visit www.amanatool.com.For a complete replacement parts listing for the above cutters please refer to our website: www.amanatool.com
R22
6
10
62
R17
Cutterhead bodies in hard wearing aluminum,complete with tungsten carbide knives.Suitable for producing two different handrailprofiles for stairs and banisters in solidsoftwood or hardwood on a spindle molder.
d
B
D
Profile A
59
R30
R18
R14
Profile B
INSERT HANDRAIL CUTTER
ØD B Profile Tool No. Ød RPM Repl. T.C. Knife130(5-1/8") 73(2-7/8") A 61130 1-1/4" 5,800-7,700 RCK-168160(6-1/4") 73(2-7/8") B 61132 1-1/4" 4,700-7,200 RCK-170
ØD B d Tool No. RPM Repl. T.C. Knife170(6-11/16") 40(1-1/2") 1-1/4" 61290 5,500-10,000 RCK-90
14-28
90
45
9
9
INSERT 45˚ LOCK MITER CUTTER
This tool features a solid-steel cutterhead,complete with two tungsten carbide knives.Suitable for producing 45° lock miter joints insoftwood, hardwood and man-made boardson a spindle molder. Can also be used forjointing horizontal pieces of timber.
B
D d
21.5
263
Rabbeting Profiling Door Grooving JOINTING Lamello® Profile Pro™Making
InsertShaper Cutters
INSERT SHAPER CUTTERS
Illustrations not shown actual size. To print 1:1 wood samples visit www.amanatool.com.For a complete replacement parts listing for the above cutters please refer to our website: www.amanatool.com
INSERT ADJUSTABLELOCK MITER CUTTER
This tool cuts the 45° lock miter and otherangles as well. It’s the ideal cutter for joiningpolygon shapes, such as hexagons (6-sided)and octagons (8-sided). The cutter has asolid steel body with replaceable carbideknives. An exclusive adjustment system isused that features positive stops at 7.5°increments for precise indexing of angles.
Cutterhead bodies in hard wearingaluminum, complete with tungsten carbideknives. Suitable for producing glue joints insoftwood, hardwood and man-made boardson a spindle molder.
ØD B Ød Tool No. Max. t RPM Repl. T.C. Knife170(6-11/16") 40(1-1/2") 1-1/4" 61270 10(13/32") 7,000 RCK-92
INSERT FINGER JOINT CUTTERThis stackable finger-jointing tool is anopen-design cutter with no limitation onchip size. As such, it’s a high-production,high-performance tool to be used onlywith an automatic or power feed. Thetool features a 3-wing solid-steelcutterhead that takes replaceable carbideknives. Each cutter will cut up to 40mmhigh and 10mm deep. Stack two or morecutterheads on the spindle to increasethe cut height capacity.
2007InsertShaping_259-264.qxd 5/30/07 11:14 AM Page 263
264
INSE
RT S
HAPE
R CU
TTER
SRabbeting Profiling Door Grooving JOINTING Lamello® Profile Pro™
Making
InsertShaper Cutters
Illustrations not shown actual size. To print 1:1 wood samples visit www.amanatool.com.For a complete replacement parts listing for the above cutters please refer to our website: www.amanatool.com
dD
BA
Cutterhead bodies available in hard wearingsteel, complete with tungsten carbide tips.Suitable for producing ‘finger style’ reversibleglue joints in softwood, hardwood and man-made boards on a spindle molder.
CARBIDE TIPPED GLUE JOINT CUTTER
INSERT GLUE JOINT CUTTER Cutterhead bodies in hard wearing steel andaluminum complete with tungsten carbideknives. Suitable for producing ‘finger style’reversible glue joints in softwood, hardwoodand man-made boards on a spindle molder.
ØD B A Tool No. Ød RPM125(5") 50(2") 15(19/32") 61070 1-1/4" 6,100-10,500
2007InsertShaping_259-264.qxd 5/30/07 11:14 AM Page 264
265
Rabbeting Profiling DOOR Grooving Jointing Lamello® Profile Pro™MAKING
InsertShaper Cutters
INSERT SHAPER CUTTERS
Illustrations not shown actual size. To print 1:1 wood samples visit www.amanatool.com.For a complete replacement parts listing for the above cutters please refer to our website: www.amanatool.com
CARBIDE TIPPED MULTICUT SET
ØD Width Tool No. Cutter Ød RPMSet of 5 cutters and distance rings 61390 Set 1-1/4" 5,500-9,600
116(4-9/16") 10(13/32") 61391 A 1-1/4" 5,500-9,600128(5-1/16") 15(19/32") 61392 B 1-1/4" 5,500-9,600140(5-1/2") 7(9/32") 61393 C 1-1/4" 5,500-9,600140(5-1/2") 15(19/32") 61394 D 1-1/4" 5,500-9,600140(5-1/2") 4(5/32") 61395 E 1-1/4" 5,500-9,600
Replacement Spacer Set use #55406.
Five piece tungsten carbide tipped cutterhead set,complete with spacer rings. Suitable for producingmultiple profiles, profile/counter profiles, in singleor multiple passes in softwood, hardwood andman-made boards on a spindle molder.
SRabbeting Profiling DOOR Grooving Jointing Lamello® Profile Pro™
MAKING
InsertShaper Cutters
Illustrations not shown actual size. To print 1:1 wood samples visit www.amanatool.com.For a complete replacement parts listing for the above cutters please refer to our website: www.amanatool.com
CARBIDE TIPPED PROFILE - BEAD & COVE 4-WING STILE & RAIL CUTTER SETTwo piece steel cutterhead set complete withfour tungsten carbide tips. Suitable for producingcomplete ‘stile and rail’ joints in softwood,hardwood and man-made boards on a spindlemolder. Reversing the cutters on the spindlemolder (see illustration) makes both the stile andrail. Set comes with necessary washer and ballbearing guide. d
B
D
CARBIDE TIPPED PROFILE - OGEE 4-WING STILE & RAIL CUTTER SETTwo piece steel cutterhead set complete withfour tungsten carbide tips. Suitable forproducing complete ‘stile and rail’ joints insoftwood, hardwood and man-made boards ona spindle molder. Reversing the cutters on thespindle molder (see illustration) makes both thestile and rail. Set comes with necessary washerand ball bearing guide.
Cutterhead set in hard wearing aluminum, completewith tungsten carbide knives. Suitable for producingvarious profile / counter profile joints in softwood,hardwood and man-made boards by usingcombinations of the supplied cutters.
Profiles for Cutters 1 & 5
Profile 2RCK-300
RCK-300L
Profile 3RCK-304
RCK-304L
Profile 4RCK-306
RCK-306L
Profile 1RCK-302
RCK-302LProfile Type A
Profile Type B
Profile Type C
SET 1
SET 1
SET 2
267
Rabbeting Profiling DOOR Grooving Jointing Lamello® Profile Pro™MAKING
InsertShaper Cutters
INSERT SHAPER CUTTERS
Illustrations not shown actual size. To print 1:1 wood samples visit www.amanatool.com.For a complete replacement parts listing for the above cutters please refer to our website: www.amanatool.com
SRabbeting Profiling DOOR Grooving Jointing Lamello® Profile Pro™
MAKING
InsertShaper Cutters
Illustrations not shown actual size. To print 1:1 wood samples visit www.amanatool.com.For a complete replacement parts listing for the above cutters please refer to our website: www.amanatool.com
INSERT RAISED PANEL CUTTER& BACKCUTTERCutterhead in hard wearing aluminum,complete with tungsten carbide knives.Suitable for producing raised panelprofiles in softwood, hardwood andman-made boards on a spindle molder.
Cutterheads in hard wearing aluminum,complete with two tungsten carbide knives andtwo scribes. Suitable for producing variousraised panel profiles in softwood, hardwood andman-made boards. Raising or lowering thecutterhead on the spindle molder producesdifferent profiles.
61241
RCK-82NCK-50
INSERT RAISED PANEL CUTTERR
40
R 40
R 6
9. 5
57 3
20. 5
#61262 with back cutter #61265 and bearing #61599
#61599 bearing
#61262
R #61265
ØD R B Ød Max. t Tool No. RPM Repl. T.C. Knife Repl. Rub Collar Description180(7-1/16") — 25(1") 1-1/4" 57(2-1/4") 61262 4,500-7,500 RCK-78 61599 Raised Panel104(4-3/32") 5/16" 18(23/32") 1-1/4" — 61265 7,600-10,000 RCK-132 — Back Cutter
Rabbeting Profiling DOOR Grooving Jointing Lamello® Profile Pro™MAKING
InsertShaper Cutters
INSERT SHAPER CUTTERS
Illustrations not shown actual size. To print 1:1 wood samples visit www.amanatool.com.For a complete replacement parts listing for the above cutters please refer to our website: www.amanatool.com
INSERT RAISED PANEL CUTTER
Dd
B
t
Three different carbide knife profiles for raised panels are available for this aluminum alloy cutterhead. Knives have two cutting edges each. In the standardpackage, the Traditional profile knives (No. RCK-42) are furnished with the cutterhead. Only a regular flat-bladescrewdriver is required to change knives. To cut the Ogee or Cove profiles, order thecutterhead and the desired knives separately.
Cutterhead in hard wearing aluminum,complete with two tungsten carbide knives.Suitable for profiling door edges insoftwood, hardwood and man-made boardson a spindle molder. Same tool bodyaccepts all five different profiles.
SRabbeting Profiling DOOR Grooving Jointing Lamello® Profile Pro™
MAKING
InsertShaper Cutters
Illustrations not shown actual size. To print 1:1 wood samples visit www.amanatool.com.For a complete replacement parts listing for the above cutters please refer to our website: www.amanatool.com
INSERT PANEL RAISED CUTTERHEAD
Cutterhead in hard wearing aluminum,complete with tungsten carbide knives.Suitable for producing various raised panelprofiles in softwood, hardwood and man-made boards on a spindle molder. Same toolbody accepts all three different profiles.
Set 17(11/16") Set 1-1/4" 61173 49.5(2") 5,000-9,000 RCK-41, RCK-43, RCK-45Note: Ball Bearing #61599 does not come with cutter, needs to be ordered separately.
Rabbeting Profiling DOOR Grooving Jointing Lamello® Profile Pro™MAKING
InsertShaper Cutters
INSERT SHAPER CUTTERS
Illustrations not shown actual size. To print 1:1 wood samples visit www.amanatool.com.For a complete replacement parts listing for the above cutters please refer to our website: www.amanatool.com
INSERT STILE & RAIL CUTTER
Knife and wood samples not shown actual size.
Cutterhead in hard wearing aluminumalloy with one-sided reversible tungstencarbide knives, utilizing the same knivesfor both stile and rail cuts by simplyadjusting the spindle height of yourshaper. Same tool body accepts all fourdifferent profiles. 3mm T-handle hex keyincluded. To change profiles orderindividual knives separately. All patternsare designed for 7/8" through 1" thickmaterials.
SRabbeting Profiling DOOR Grooving Jointing Lamello® Profile Pro™
MAKING
InsertShaper Cutters
Illustrations not shown actual size. To print 1:1 wood samples visit www.amanatool.com.For a complete replacement parts listing for the above cutters please refer to our website: www.amanatool.com
Hard wearing steel tool body complete with four tungstencarbide tips. Suitable for producing grooves & slots insoftwood & hardwood for hiding ugly resin spots or knots.
B
d
D
LAMELLO® - INSERT BISCUIT JOINT CUTTERHard wearing steel body complete with tungsten carbideknives and scorers. Suitable for producing grooves andslots in softwood, hardwood and man-made boards forbiscuit jointing. For use with most biscuit jointingmachines.
ØD ØD1 T C B Tool No. Ød RPM Repl. T.C. Knife Rub Collar4" 3-1/4" 4.7-7.9 (3/16"-5/16") 3/8" 1-1/2" 61218 1-1/4" 12,900 RCK-236 RCK-238 C-033
The perfect fix for undersized plywood flat panel “Mission Style, Arts & Crafts and Shaker” cabinet doors.Set includes unique adjustment system & a gauge for precise settings.
• Designed to cut precise grooves to provide undersizedplywood veneered panels with a snug rattle free fit.
• For 5.5mm undersized 1/4" plywood.
• For 5.9mm oversized 1/4" veneered plywood.
• Adjust the panel groove width (3/16" to 5/16").
• Cut frame stock from 5/8" through 1-1/2" in thickness.
273Illustrations not shown actual size. To print 1:1 wood samples visit www.amanatool.com.
Rabbeting Profiling Door Grooving Jointing Lamello® PROFILE Making PRO™
InsertShaper Cutters
INSERT SHAPER CUTTERS
The Profile Pro™ Universal Shaper Cutter System from Amana Tool®. Designed for professionals, the Profile Pro™ features over 135 different interchangeable steel knife patterns, ranging from molding to joinery to door sets,which can all be used with a single cutterhead. Blank (unground) knives are alsoavailable for custom patterns.
The Profile Pro™ features a unique system of fixed steel pins (A), screws (B) and awedge block (C) that simultaneously indexes and secures the knives (D) to the head(E). This enables fast, accurate set-ups and eliminates the tedious task of adjusting
the knives. This type of system also offersgreater safety over other types of cutterheads.
The Profile Pro™ cutterheads are 100mm, 110mmand 120mm black-oxide finished solid steel or 68mm,88mm, 100mm and 120mm anodized lightweightaluminum alloy. The steel cutterheads arerecommended for heavy-duty type shapers with 3horsepower or more. The aluminum heads, whichare 60% less weight than their steelcounterparts, are recommended for all spindleshapers, especially smaller machines with 2horsepower or less.
When selecting the diameter, choose a cutterhead that will properly fit within thetable insert rings of your shaper. The diameters shown are for the head only, soyou must add from 14mm to 38mm to the diameter to allow for the knives.(Example: Cutterhead #61100 or SCS-1000 (88mm) with #64F000 straight knives(add 14mm) = 102mm total outside diameter.)
Above: Solid steel Profile Pro™ shaper head
Above: Aluminum-alloy Profile Pro™ shaper headB C
D
A
E
P R O F I L E P R O™
CUTTERSSHAPER
Note: Machine safety guards have been removed for photo clarity.
Popular Profiles Now
Available Carbide Tipped
Popular Profiles Now
Available Carbide Tipped
Popular Profiles Now Available Carbide Tipped Popular Profiles Now Available Carbide Tipped
P. 277 & 278
Popular Popular Profiles Now Profiles Now
Available Available Carbide Carbide Tipped Tipped
Popular Popular Profiles Now Profiles Now
Available Available Carbide Carbide Tipped Tipped
Popular Profiles Now
Available Carbide Tipped
Popular Profiles Now
Available Carbide Tipped
Popular Profiles Now Available Carbide Tipped Popular Profiles Now Available Carbide Tipped
All sets include the basic 68mm & 88mm diameter aluminum alloycutterhead and seven pairs of interchangeable profile knives. Also includedis a custom hardwood storage box, hex key and color poster showingmany of the different available knife profiles. Look over the following pagesfor a full line of aluminum and steel cutterheads in 3/4", 1", 1-1/4" and30mm bores, a wide array of additional knives, T-bushings for 1/2" and 3/4"diameter arbors, and empty hardwood storage boxes.
276 Illustrations not shown actual size. To print 1:1 wood samples visit www.amanatool.com.
INSE
RT S
HAPE
R CU
TTER
SRabbeting Profiling Door Grooving Jointing Lamello® PROFILE
Making PRO™
InsertShaper Cutters
Beautifully made custom hardwood storage boxes will accommodate either 6, 12, 24 or 36 pairs of 40mm knives along with one Profile-Pro™ cutterhead.Order knives and cutterhead separately.
HARDWOOD STORAGE BOXES
Description Tool No. Max. Head Dia.Empty hardwood box for 6 pr. 40mm knives 62282 100mmEmpty hardwood box for 12 pr. 40mm knives 62284 120mmEmpty hardwood box for 24 pr. 40mm knives 62286 120mmEmpty hardwood box for 36 pr. 40mm knives 62288 120mm
Popular Profiles Now Available Carbide Tipped Popular Profiles Now Available Carbide Tipped
Popular Profiles Now
Available Carbide Tipped
Popular Profiles Now
Available Carbide Tipped
Popular Profiles Now
Available Carbide Tipped
Popular Profiles Now
Available Carbide Tipped
Popular Profiles Now Available Carbide Tipped Popular Profiles Now Available Carbide Tipped
More Profiles Available On Our Website www.amanatool.com
Illustrations not shown actual size. For additional profiles or to print 1:1 wood samples visit www.amanatool.com.
Note: All knives are 40mm and are not shown at actual size. Each part # consists of one pair.See page 276 for blank (unground) knives.
*Note: Part #’s beginning with “CT” and marked in red are carbide tipped.
Specifications shown (‘R8’, ‘R10’ etc.) are in millimeters.
40mm STEEL KNIVES
22°
R7
R6
R8
5°
64F000 64F00264F001 64F003
R12R12
R10
R8
64F004 64F005
R5
R5
R5R40
64F006 64F008 64F009
R20
R20
R5R6
R15
64F011
R1
64F014
R10
R10
64F013
64F015
6mm
64F016*CT016
6mm
64F017*CT017
R3.5
R5
64F020
R5R3R3
R5R7
R7
64F021
R3
R12
R5
64F018
R6
R3.5
64F019
R8
R4
R10R5
R7R8
64F022 64F024
R5
R5R5
R5
64F025
R8
R8
64F028
R5
R6
12°
64F029
64F027
R2.5R6
R6.5
R5
64F036
R5
R5
64F031
R6
R5
64F030
R3R3
R5
R2.5
64F033
86° 86°
64F034 64F035
15°
R7.5
64F038
R4R4
R15
R6
R6
R10R15
R6R6
64F04564F043 64F044
R8
R10R10
64F049
R8
R6
64F051
R5
R10
R5
64F052
Popular Profiles Now
Available Carbide Tipped
Popular Profiles Now
Available Carbide Tipped
Popular Profiles Now Available Carbide Tipped Popular Profiles Now Available Carbide Tipped
Popular Profiles Now
Available Carbide Tipped
Popular Profiles Now
Available Carbide Tipped
Popular Profiles Now
Available Carbide Tipped
Popular Profiles Now
Available Carbide Tipped
Popular Profiles Now Available Carbide Tipped Popular Profiles Now Available Carbide Tipped Popular Profiles Now Available Carbide Tipped Popular Profiles Now Available Carbide Tipped
R12
64F058
R15
64F057
R8
R6
64F054
R15
64F065
4mm
45° 45°
4mm4mm
4mm
5.7mm
4mm
4mm45°45°
64F076
64F077
64F075*CT075
64F07264F071
5mm
45°
R4
48°
48°
R3
R5
R35
64F083*CT083
64F080 64F081
R10
R8
R8
64F059
R15
64F066*CT066
45°
5mm
64F084*CT084
R40
64F087
277
Rabbeting Profiling Door Grooving Jointing Lamello® PROFILEMaking PRO™
Popular Profiles Now Available Carbide Tipped Popular Profiles Now Available Carbide Tipped
Popular Profiles Now
Available Carbide Tipped
Popular Profiles Now
Available Carbide Tipped
Popular Profiles Now
Available Carbide Tipped
Popular Profiles Now
Available Carbide Tipped
Popular Profiles Now Available Carbide Tipped Popular Profiles Now Available Carbide Tipped
More Profiles Available On Our Website www.amanatool.com
278
INSE
RT S
HAPE
R CU
TTER
SRabbeting Profiling Door Grooving Jointing Lamello® PROFILE
Making PRO™
InsertShaper Cutters
40mm STEEL KNIVES
Note: All knives are 40mm and are not shown at actual size. Each part # consists of one pair.See page 276 for blank (unground) knives.
Specifications shown (‘R8’, ‘R10’ etc.) are in millimeters.
66F001 66F002 66F003 66F004
66F005 66F006 66F007 66F008
66F009 66F010 66F011 66F012
R12
R10
R10
R6
R15
R16
R38
R25
R25
R20
R20
R15
R8
R8 R20
R8
R8
R6
R6 R25
R25
R25
+60mm STEEL KNIVES(Limiters Included)
60°
*Note: Part #’s beginning with “CT” and marked in red are carbide tipped.
Popular Profiles Now
Available Carbide Tipped
Popular Profiles Now
Available Carbide Tipped
Popular Profiles Now Available Carbide Tipped Popular Profiles Now Available Carbide Tipped
Popular Profiles Now
Available Carbide Tipped
Popular Profiles Now
Available Carbide Tipped
Popular Profiles Now
Available Carbide Tipped
Popular Profiles Now
Available Carbide Tipped
Popular Profiles Now Available Carbide Tipped Popular Profiles Now Available Carbide Tipped Popular Profiles Now Available Carbide Tipped Popular Profiles Now Available Carbide Tipped
5°R4
R20R15
R6R4
R15R3
R4R4
R23R3
R3R10
R4
R3
R7
R14
R3
45°R4R4
R3
64F10764F10564F10364F102
64F100*CT100
64F101
8mm
R8R8
R8R8
R7R7
R7R7
8mm4.4mm4.4mm
64F097*CT097
64F095
64F099
R4
R8R8
64F089
R12 R4
R5
R6
10mm 8mm
R6.5
R6.5
R7R7
R7R7
64F096 64F098
64F09464F092*CT092
64F090*CT090
10mm
64F091*CT091
45°
45°
64F127
R6
R6
R8
R8
R10
R10
R12
R12
R15
R15
64F176 64F17764F17564F173 64F174
R3
R3
R3R2.5
64F122
R13.5
64F118
R4 R13.5
64F117 64F119*CT119
R3
R15
R2.5
R3
64F121
R4
R20
45°
64F109
R6
R11
R6
R11
64F112
64F111
Illustrations not shown actual size. For additional profiles or to print 1:1 wood samples visit www.amanatool.com.
ENDLESS POSSIBILITIES are yourswhen you purchase this set of 5 CarbideTipped 2-Wing Cutters allowing you toexecute countless profiles and shapes.
SCS-2100 Complete Set w/1-1/4" Bore.
1
1
1
1
1
1
1
3
3
3
3
3
2
2
2
2
2
2
2
4
4
4
4
4
4
4
4
4
4
3
3
3
4
4
44
4
5
5
4
4
4
4
4
4
222
22
3
3
5
3
3
3
212
3
1
11
5
5
5
4 44
3
3
4
4
4
5
44
44
4
44
4
5
5
5
5
5
5
5
5
5
2 2
2
2
2 2
1 1
1
1
2
23
3
2
3 3
1
1
4
4
44
44
5
5
2
3
1
1
The following are illustrations showing the different profiles and combinations based on single, double and triple cut. We have enclosed a set of spacers to adjust the spacing as needed. (Illustrations are not shown at actual size.)
279Illustrations not shown actual size. To print 1:1 wood samples visit www.amanatool.com.
Rabbeting Profiling Door Grooving Jointing Lamello® PROFILEMaking PRO™
BALL BEARING RUB COLLARS FOR SHAPER CUTTERSDesigned for template shaping such as arched or cathedral doors, etc. Featuresa ball bearing center with a steel sleeve and is available with either 1/2", 3/4"and 1-1/4"inside diameter. Please see page 281 for additional rub collars.
LONG T BUSHINGSØd ØD Tool No. B1/2 3/4 BU-928 1-5/163/4 1 BU-926 1-5/163/4 1-1/4 BU-924 1-5/161 1-1/4 BU-922 1-5/16
SHAPER CUTTER ‘T’ BUSHINGS(WITH FLANGE), 2 REQUIRED PER CUTTER
BALL BEARING RUB COLLARS
Order No.(Ball bearingw/ retainer) Ød
61650 1-1/461652 161654 30mm61656 3/4
Order No.(retainer only) Ød
61670 1-1/461672 161674 30mm61676 3/4
NOTE: Bearing only (1-1/4 x 2-1/2) order #61660 (no retainer).
Designed for template shaping such as arched or cathedral doors, etc.Features a steel ball bearing center and interchangeable, lightweightaluminum rub collar sleeves. To order, specify rub collar (example:#61600, 75mm), and then order the correct size bearing to fit yourspindle. The bearing includes a special steel retaining collar that properlysecures the assembly to your spindle (3/4", 1", 1-1/4" or 30mm).
D
d
B
Collar w/ballbearinginside
Retainer
FOR 3/4", 1", 1-1/4" & 30mm SPINDLE SHAPERS
281
Rabbeting Profiling Door Grooving Jointing Lamello® ACCESSORIESMaking