A Division of Watts Water Technologies Inc. Insert Check Valves Watts Industries produces an extensive assortment of plastic check valves. These check valves can be found in water meters, shower and bath taps and safety units, but they are also used in boilers, hot water boilers, pumps and (underfloor) heating systems. The check valves are also used in industrial systems. This in-house production of check valves allows us to respond adequately to market developments, with new products and improvements on existing products.
36
Embed
Insert Check Valves - Multicycle · Insert Check Valves ... H e a d q u a r t e r s ... These check valves are used in plumbing fittings, sanitary taps and in threaded
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
A Division of Watts Water Technologies Inc.
Insert Check Valves
Watts Industries produces an extensive assortment of plastic check valves. These check valves can be found in water meters, shower and bath taps and safety units, but they are also used in boilers, hot water boilers, pumps and (underfloor)
heating systems. The check valves are also used in industrial systems. This in-house production of check valves allows us to respond adequately to market developments, with new products and improvements on existing products.
s r e t r a u q d a e H
s e l a s d n a g n i r u t c a f u n a M
g n i r u t c a f u n a M
s e l a S
INSERT CHECK VALVES
2
OUR EUROPEAN PRESENCE
INSERT CHECK VALVES
3
CONTENTS
CO - series 4Chapter CO
CS - series 9Chapter CS
FI - series 10Chapter FI
FO - series 12Chapter FO
FW - series 14Chapter FW
IN - series 16Chapter IN
IO - series 22Chapter IO
IW - series 28Chapter IW
TO - series 29Chapter TO
WI - series 30Chapter WI
WM - Series 31Chapter WM
Auxiliary 35Mounting ToolsChapter Tools
INSERT CHECK VALVES
4
CO010 DN8
The Watts check valve type CO010 with unique sealing principle offers outstanding performances.These check valves are used in plumbing fittings, sanitary taps and in threaded non-return valves where building codes and international standards are required.
Technical specificationsWorking pres. PN10 Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN8
ApprovalsKiwa NL Belgaqua BEDVGW DNF FWRAS UKETA DKSITAC S
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRO-ring NBRSpring Stainless Steel
Other diameters and other closing pressures on request.
max
Ø 7
.6
10.7+0.10
Ø 1
0+
0.1
0
Ø 1
0.7±
0.1
15∞
Ø 7
1.5
max 10.65
10.5 ± 0.15
max 13.75
Ø 9
.9 ±
0.0
5
Mounting dimensions O-ring Product dimensions
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
flow (m3/h)
100
90
80
70
60
50
40
30
20
10
delta
P (
kPa)
Pressure loss-curve
INSERT CHECK VALVES
5
CO013 DN10
The Watts check valve type CO013 with unique sealing principle offers outstanding performances.These check valves are used in plumbing fittings, sanitary taps and in threaded non-return valves where building codes and international standards are required.
Technical specificationsWorking pres. PN10 Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN10
ApprovalsKiwa NL Belgaqua BEDVGW DNF FWRAS UKETA DKSITAC S
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRO-ring NBRSpring Stainless Steel
Other diameters and other closing pressures on request.
max
Ø 1
0.05
16.2+0.10
Ø 1
3+
0.1
0
Ø 1
3.5±
0.1
15∞
Ø 9
.25
1.78
max 16.1
16 ± 0.1
max 19.2
Ø 1
2.9
+ 0
.05
- 0.
1
Mounting dimensions O-ring Product dimensions
0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0
flow (m3/h)
100
90
80
70
60
50
40
30
20
10
delta
P (
kPa)
Pressure loss-curve
INSERT CHECK VALVES
6
CO014 DN10
The Watts check valve type CO014 with unique sealing principle offers outstanding performances.These check valves are used in plumbing fittings, sanitary taps and in threaded non-return valves where building codes and international standards are required.
Technical specificationsWorking pres. PN10 Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN10
ApprovalsKiwa NL Belgaqua BEDVGW DNF FWRAS UKETA DKSITAC S
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRO-ring NBRSpring Stainless Steel
Other diameters and other closing pressures on request.
max
Ø 1
1.7
16.3+0.10
Ø 1
4+
0.1
0
Ø 1
4.5±
0.1
15∞
Ø 1
0.82
1.78
max 17.2
16± 0.15- 0.2
max 21.2
Ø 1
3.9
± 0
.05
Mounting dimensions O-ring Product dimensions
0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0
flow (m3/h)
100
90
80
70
60
50
40
30
20
10
delta
P (
kPa)
Pressure loss-curve
INSERT CHECK VALVES
7
CO015 DN10
The Watts check valve type CO015 with unique sealing principle offers outstanding performances.These check valves are used in plumbing fittings, sanitary taps and in threaded non-return valves where building codes and international standards are required.
Technical specificationsWorking pres. PN10 Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN10
ApprovalsKiwa NL Belgaqua BEDVGW DNF FWRAS UKETA DKSITAC S
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRO-ring NBRSpring Stainless Steel
Other diameters and other closing pressures on request.
max
Ø 1
1.7
16.3+0.10
Ø 1
5+
0.1
0
Ø 1
5.5±
0.1
15∞
Ø 1
1.1
1.78
max 16.15
16 ± 0.15
max 20.4
Ø 1
4.9
+ 0
.05
- 0.
1
Mounting dimensions O-ring Product dimensions
0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0
flow (m3/h)
200
180
160
140
120
100
80
60
40
20
delta
P (
kPa)
Pressure loss-curve
INSERT CHECK VALVES
8
CO020 DN15
The Watts check valve type CO020 with unique sealing principle offers outstanding performances.These check valves are used in plumbing fittings, sanitary taps and in threaded non-return valves where building codes and international standards are required.
Technical specificationsWorking pres. PN10 Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN15
ApprovalsKiwa NL DVGW DNF FWRAS UKETA DKSITAC SBelgaqua B
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRO-ring NBRSpring Stainless Steel
Other diameters and other closing pressures on request.
max
Ø 1
1.7
17.8+0.10
Ø 2
0+
0.1
0
Ø 2
0.5±
0.1
15∞
Ø 1
6
2
max 17.6
17.5 ± 0.1
max 23.1
Ø 1
9.9
+ 0
.05
- 0.
1
Mounting dimensions O-ring Product dimensions
0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0
flow (m3/h)
100
90
80
70
60
50
40
30
20
10
delta
P (
kPa)
Pressure loss-curve
INSERT CHECK VALVES
9
CS015 DN10
The Watts check valve type CS015 is the latest generation of check valves.Not only do these check valves operate ideally, they also offer added advantages:- identical contours in open and closed position (stem of valve doesn't protrude);- variable outlet system, facing side or rear side.The innovative use of materials in these valves renders them more resistant to both chemicals and high temperatures. The CS is also more compact than conventional check valves, and therefore easier to fit!
Technical specificationsWorking pres. PN10Testing pres. 1600 kPaClosing pres. 30 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN10
ApprovalsKiwa NLDVGW DNF FWRAS UKETA DKSITAC S
Material specificationsHouse PSU Valve PSUTorpedo PSUO-ring NBRSpring Stainless Steel
Other diameters and other closing pressures on request.
max
. ø 1
1.7
+0.
1ø
15
-
0
ø 1
1.1 +0
ø 1
4.9
-
0.1
+0.116.2 -0
16 ±0.151.78
15˚
ø 1
5.5
±0.
1
ø 1
4.6
±0.
1
Mounting example O-ring Product dimensions
0 0.2 0.4 0.6 0.8 1.0 1.2
flow (m3/h)
100
90
80
70
60
50
40
30
20
10
delta
P (
kPa)
Pressure loss-curve
max
. ø 1
1.7
+0.
1ø
15
-
0
ø 1
1.1 +0
ø 1
4.9
-
0.1
+0.116.2 -0
16 ±0.151.78
15˚
ø 1
5.5
±0.
1
ø 1
4.6
±0.
1
max
. ø 1
1.7
+0.
1ø
15
-
0
ø 1
1.1 +0
ø 1
4.9
-
0.1
+0.116.2 -0
16 ±0.151.78
15˚
ø 1
5.5
±0.
1
ø 1
4.6
±0.
1
INSERT CHECK VALVES
10
FI010 DN8
The Watts check valve type FI010 is a perfect slide-in cartridge with added advantages.The best performance in those inlet sides where tightening has to be simple.It is marked by its unique construction and its universal applications.
Technical specificationsWorking pres. PN10Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN8
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRO-ring NBRSpring Stainless Steel
Other diameters and other closing pressures on request.
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
flow (m3/h)
100
90
80
70
60
50
40
30
20
10
delta
P (
kPa)
Pressure loss-curve
Mounting example Product dimensions
ø 2
3 ±
0.1
ø 1
2
12.7 ± 0.1
max 2.15
2.0 ± 0.2
ø 2
3 ±
0.1
ø 1
2
12.7 ± 0.1
max 2.15
2.0 ± 0.2
ø 2
3 ±
0.1
ø 1
2
12.7 ± 0.1
max 2.15
2.0 ± 0.2
INSERT CHECK VALVES
11
FI015 DN15
The Watts check valve type FI015 is a perfect slide-in cartridge with added advantages.The best performance in those inlet sides where tightening has to be simple.It is marked by its unique construction and its universal applications.
Technical specificationsWorking pres. PN10Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN15
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRO-ring NBRSpring Stainless Steel
Other diameters and other closing pressures on request.
0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0
flow (m3/h)
100
90
80
70
60
50
40
30
20
10
delta
P (
kPa)
Pressure loss-curve
ø 3
0 ±
0.5
ø 1
8.5
± 0.
1
16.2 ± 0.2
max 7.7
max 2.7
2.4 ± 0.2
Mounting example Product dimensions
ø 3
0 ±
0.5
ø 1
8.5
± 0.
1
16.2 ± 0.2
max 7.7
max 2.7
2.4 ± 0.2
ø 3
0 ±
0.5
ø 1
8.5
± 0.
1
16.2 ± 0.2
max 7.7
max 2.7
2.4 ± 0.2
INSERT CHECK VALVES
12
FO015 DN15
The Watts check valve type FO015 is a perfect slide-in cartridge with added advantages.The best performance in those outlet sides where tightening has to be simple.It is marked by its unique construction and its universal applications.
Technical specificationsWorking pres. PN10Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN15
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRO-ring NBRSpring Stainless Steel
Other diameters and other closing pressures on request.
0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0
flow (m3/h)
100
90
80
70
60
50
40
30
20
10
delta
P (
kPa)
Pressure loss-curve
Mounting example Product dimensions
Ø19
.5±
0.1
16.2 ± 0.2max. 2.7
2.4 ± 0.2
max. 7.7Ø
30±
0.5
Ø19
.5±
0.1
16.2 ± 0.2max. 2.7
2.4 ± 0.2
max. 7.7
Ø30
± 0.
5
Ø19
.5±
0.1
16.2 ± 0.2max. 2.7
2.4 ± 0.2
max. 7.7
Ø30
± 0.
5
INSERT CHECK VALVES
13
FO020 DN20
The Watts check valve type FO020 is a perfect slide-in cartridge with added advantages.The best performance in those outlet sides where tightening has to be simple.It is marked by its unique construction and its universal applications.
Technical specificationsWorking pres. PN10Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN20
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRO-ring NBRSpring Stainless Steel
Other diameters and other closing pressures on request.
0 0.8 1.6 2.4 3.2 4.0 4.8 5.6 6.4 7.2 8.0
flow (m3/h)
100
90
80
70
60
50
40
30
20
10
delta
P (
kPa)
Pressure loss-curve
ø 2
4 ±
0.2
22 ± 0.2max 2.5
2.5 ± 0.2
max 10.5
ø 4
4.5
± 0.
2
Mounting example Product dimensions
ø 2
4 ±
0.2
22 ± 0.2max 2.5
2.5 ± 0.2
max 10.5ø
44.
5 ±
0.2
ø 2
4 ±
0.2
22 ± 0.2max 2.5
2.5 ± 0.2
max 10.5
ø 4
4.5
± 0.
2
INSERT CHECK VALVES
14
FW010 DN10
The Watts check valve type FW010 shows the inventive solutions of Watts Industries.Our R&D made it for our customers with the same performances they are used to.Other diameters and closing pressures are also possible.
Technical specificationsWorking pres. PN10Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN10
ApprovalsKiwa NLBelgaqua BDVGW D
Other diameters and other closing pressures on request.
0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0
flow (m3/h)
100
90
80
70
60
50
40
30
20
10
delta
P (
kPa)
Pressure loss-curve
Mounting example Product dimensions
4.6 ± 0.1 0.7 ± 0.2
14.4 ± 0.24.7 ± 0.2
2.15 ± 0.1
2.7 ± 0.1
ø 2
3 ±
0.1
ø 1
9.4
± 0.
1
max
ø 1
3.13
ø 1
6.8
± 0.
05
4.6 ± 0.1 0.7 ± 0.2
14.4 ± 0.24.7 ± 0.2
2.15 ± 0.1
2.7 ± 0.1
ø 2
3 ±
0.1
ø 1
9.4
± 0.
1
max
ø 1
3.13
ø 1
6.8
± 0.
05
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRO-ring NBRSpring Stainless Steel
4.6 ± 0.1 0.7 ± 0.2
14.4 ± 0.24.7 ± 0.2
2.15 ± 0.1
2.7 ± 0.1
ø 2
3 ±
0.1
ø 1
9.4
± 0.
1
max
ø 1
3.13
ø 1
6.8
± 0.
05
INSERT CHECK VALVES
15
FW015 DN15
The Watts check valve type FW015 shows the inventive solutions of Watts Industries.Our R&D made it for our customers with the same performances the are used to.Other diameters and closing pressures are also possible.
Technical specificationsWorking pres. PN10Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN15
ApprovalsBelgaqua B
Other diameters and other closing pressures on request.
0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0
flow (m3/h)
100
90
80
70
60
50
40
30
20
10
delta
P (
kPa)
Pressure loss-curve
Mounting example Product dimensions
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRO-ring NBRSpring Stainless Steel
+ 0.14 0
16.2 ± 0.11.5 ± 0.5
0ø
30
- 0.
5
3.1 ± 0.05 7.5 ± 0.5
ø 1
7.2
± 0.
1
ø 2
4 ±
0.1
+ 0.14 0
16.2 ± 0.11.5 ± 0.5
0ø
30
- 0.
5
3.1 ± 0.05 7.5 ± 0.5
ø 1
7.2
± 0.
1
ø 2
4 ±
0.1
+ 0.14 0
16.2 ± 0.11.5 ± 0.5
0ø
30
- 0.
5
3.1 ± 0.05 7.5 ± 0.5
ø 1
7.2
± 0.
1
ø 2
4 ±
0.1
INSERT CHECK VALVES
16
IN015 DN15
The Watts snap-in valve type IN015 is a compact and therefore easy to install check valve. The advantage for OEM applications is, that in case of a side-connection in the housing, the O-ring can be mounted first and secondly the check valve itself. This way the O-ring will not be damaged by the sharp edges of the side-connection.This check valve will meet all quality requirements.Its advantages are yours.
Technical specificationsWorking pres. PN10 Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN 15
ApprovalsKiwa NL SITAC SDVGW DNF FWRAS UKETA DKBelgaqua B
Other diameters and other closing pressures on request.
0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0
flow (m3/h)
100
90
80
70
60
50
40
30
20
10
delta
P (
kPa)
Pressure loss-curve
Ø 1
2
1.512.2 ± 0.4
17.0 ± 0.5
23.0 ± 0.5
Ø 1
5.2
max
Ø 1
1.5
7.4+0.30
min 0.2
+0.
10
Ø 1
5.8±
0.1
20∞
30∞
Ø 1
5.1
0 -0.0
5
Mounting example O-ring Product dimensions
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRO-ring NBRSpring Stainless Steel
INSERT CHECK VALVES
17
IN020 DN20
The Watts snap-in valve type IN020 is a compact and therefore easy to install check valve. The advantage for OEM applications is, that in case of a side-connection in the housing, the O-ring can be mounted first and secondly the check valve itself. This way the O-ring will not be damaged by the sharp edges of the side-connection. This check valve will meet all quality requirements.Its advantages are yours.
Technical specificationsWorking pres. PN10 Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN20
ApprovalsKiwa NL SITAC SDVGW DNF FWRAS UKETA DKBelgaqua B
Other diameters and other closing pressures on request.
0 0.8 1.6 2.4 3.2 4.0 4.8 5.6 6.4 7.2 8.0
flow (m3/h)
100
90
80
70
60
50
40
30
20
10
delta
P (
kPa)
Pressure loss-curve
Ø 1
6
2.017.0 ± 0.4
23.2 ± 0.5
32.4 ± 0.5
Ø 1
9.8
max
Ø 1
5.2
10.8+0.30
min 0.4
+0.
10
Ø 2
0.6±
0.1
20∞
30∞
Ø 1
9.65
0 -0.0
5
Mounting dimensions O-ring Product dimensions
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRO-ring NBRSpring Stainless Steel
INSERT CHECK VALVES
18
IN025 DN25
The Watts snap-in valve type IN025 is a compact and therefore easy to install check valve. The advantage for OEM applications is, that in case of a side-connection in the housing, the O-ring can be mounted first and secondly the check valve itself. This way the O-ring will not be damaged by the sharp edges of the side-connection. This check valve will meet all quality requirements.Its advantages are yours.
Technical specificationsWorking pres. PN10 Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN25
ApprovalsKiwa NL SITAC SDVGW DNF FWRAS UKETA DKBelgaqua B
Other diameters and other closing pressures on request.
0 1 2 3 4 5 6 7 8 9 10
flow (m3/h)
100
90
80
70
60
50
40
30
20
10
delta
P (
kPa)
Pressure loss-curve
Ø 2
0
2.521.5 ± 0.4
28.5 ± 0.5
38.4 ± 0.5
Ø 2
4.95
max
Ø 1
8.8
13.9+0.30
min 0.6
+0.
10
Ø 2
5.8±
0.1
20∞
30∞
Ø 2
4.8
0 -0.0
7
Mounting dimensions O-ring Product dimensions
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRO-ring NBRSpring Stainless Steel
INSERT CHECK VALVES
19
IN032 DN32
The Watts snap-in valve type IN032 is a compact and therefore easy to install check valve. The advantage for OEM applications is, that in case of a side-connection in the housing, the O-ring can be mounted first and secondly the check valve itself. This way the O-ring will not be damaged by the sharp edges of the side-connection. This check valve will meet all quality requirements.Its advantages are yours.
Technical specificationsWorking pres. PN10 Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN32
ApprovalsKiwa NL SITAC SDVGW DNF FWRAS UKETA DKBelgaqua B
Other diameters and other closing pressures on request.
0 2 4 6 8 10 12 14 16 18 20
flow (m3/h)
100
90
80
70
60
50
40
30
20
10
delta
P (
kPa)
Pressure loss-curve
Ø 2
6.61
2.9526.65 ± 0.4
37.7 ± 0.5
51.4 ± 0.5
Ø 3
1.75
max
Ø 2
4.2
17.0+0.30
min 0.8
+0.
10
Ø 3
2.9±
0.1
20∞
30∞
Ø 3
1.6±0
.07
Mounting dimensions O-ring Product dimensions
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRO-ring NBRSpring Stainless Steel
INSERT CHECK VALVES
20
IN040 DN40
The Watts snap-in valve type IN040 is a compact and therefore easy to install check valve. The advantage for OEM applications is, that in case of a side-connection in the housing, the O-ring can be mounted first and secondly the check valve itself. This way the O-ring will not be damaged by the sharp edges of the side-connection. This check valve will meet all quality requirements.Its advantages are yours.
Technical specificationsWorking pres. PN10 Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN40
ApprovalsKiwa NL SITAC SDVGW DNF FWRAS UKETA DKBelgaqua B
Other diameters and other closing pressures on request.
0 4 8 12 16 20 24 28 32 36 40
flow (m3/h)
100
90
80
70
60
50
40
30
20
10
delta
P (
kPa)
Pressure loss-curve
Ø 3
2.92
3.5333.3 ± 0.4
45.3 ± 0.5
61.1 ± 0.5
Ø 3
9.5
max
Ø 3
0.1
20.15+0.30
min 1.0
+0.
10
Ø 4
1.2±
0.1
20∞
30∞
Ø 3
9.3±0
.1
Mounting dimensions O-ring Product dimensions
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRO-ring NBRSpring Stainless Steel
INSERT CHECK VALVES
21
IN050 DN50
The Watts snap-in valve type IN050 is a compact and therefore easy to install check valve. The advantage for OEM applications is, that in case of a side-connection in the housing, the O-ring can be mounted first and secondly the check valve itself. This way the O-ring will not be damaged by the sharp edges of the side-connection. This check valve will meet all quality requirements.Its advantages are yours.
Technical specificationsWorking pres. PN10 Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN50
ApprovalsKiwa NL SITAC SDVGW DNF FWRAS UKETA DKBelgaqua B
Other diameters and other closing pressures on request.
0 8 16 24 32 40 48 56 64 72 80
flow (m3/h)
100
90
80
70
60
50
40
30
20
10
delta
P (
kPa)
Pressure loss-curve
Ø 4
2
4.045.8 ± 0.4
57.3 ± 0.5
80.5 ± 0.5
Ø 4
9.6
max
Ø 3
7.7
24.3+0.30
min 1.2
+0.
10
Ø 5
1.9±
0.1
20∞
30∞
Ø 4
9.4±0
.1
Mounting dimensions O-ring Product dimensions
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRO-ring NBRSpring Stainless Steel
INSERT CHECK VALVES
22
IO015 DN15
To meet the ever increasing quality requirements, Watts developed the snap-in check valve type IO015. The O-ring is already mounted and fixated on the check valve, thus creating an easy to mount check valve.
Technical specificationsWorking pres. PN10 Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN15
Other diameters and other closing pressures on request.
0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0
flow (m3/h)
100
90
80
70
60
50
40
30
20
10
delta
P (
kPa)
Pressure loss-curve
Ø 1
5.2
max
Ø 1
1.5
8.4+0.3
0min 0.2
+0.
1 0
Ø 1
5.8±
0.1
20∞
30∞
Ø 1
2
1.513.3 ± 0.4
18.0 ± 0.5
max 24.5
Ø 1
5.1
0-0
.05
Mounting dimensions O-ring Product dimensions
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRO-ring NBRSpring Stainless Steel
INSERT CHECK VALVES
23
IO020 DN20
To meet the ever increasing quality requirements, Watts Industries developed the snap-in check valve type IO020. The O-ring is already mounted and fixated on the check valve, thus creating an easy to mount check valve.
Technical specificationsWorking pres. PN10 Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN20
Other diameters and other closing pressures on request.
0 0.8 1.6 2.4 3.2 4.0 4.8 5.6 6.4 7.2 8.0
flow (m3/h)
100
90
80
70
60
50
40
30
20
10
delta
P (
kPa)
Pressure loss-curve
Ø 1
9.8
max
Ø 1
5.2
10.8+0.3
0min 0.4
+0.
1 0
Ø 2
0.6±
0.1
20∞
30∞
Ø 1
6
2.017.0 ± 0.4
23.2 ± 0.5
max 32.9
Ø 1
9.65
0-0
.05
Mounting dimensions O-ring Product dimensions
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRO-ring NBRSpring Stainless Steel
INSERT CHECK VALVES
24
IO025 DN25
To meet the ever increasing quality requirements, Watts Industries developed the snap-in check valve type IO025. The O-ring is already mounted and fixated on the check valve, thus creating an easy to mount check valve.
Technical specificationsWorking pres. PN10 Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN25
Other diameters and other closing pressures on request.
0 1 2 3 4 5 6 7 8 9 10
flow (m3/h)
100
90
80
70
60
50
40
30
20
10
delta
P (
kPa)
Pressure loss-curve
Ø 2
4.95
max
Ø 1
8.8
16.7+0.3
0min 0.6
+0.
1 0
Ø 2
5.8±
0.1
20∞
30∞
Ø 2
0
2.524.3 ± 0.4
31.3 ± 0.5
max 41.7
Ø 2
4.8
0-0
.07
Mounting dimensions O-ring Product dimensions
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRO-ring NBRSpring Stainless Steel
INSERT CHECK VALVES
25
IO032 DN32
To meet the ever increasing quality requirements, Watts Industries developed the snap-in check valve type IO032. The O-ring is already mounted on the check valve and keeps fixed, which creates an easy to fit check valve.
Technical specificationsWorking pres. PN10 Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN32
ApprovalsKiwa NL DVGW DWRAS UKETA DKBelgaqua BNF F
Other diameters and other closing pressures on request.
0 2 4 6 8 10 12 14 16 18 20
flow (m3/h)
100
90
80
70
60
50
40
30
20
10
delta
P (
kPa)
Pressure loss-curve
Ø 3
1.75
max
Ø 2
4.2
17.0+0.3
0min 0.8
+0.
1 0
Ø 3
2.9±
0.1
20∞
30∞
Ø 2
6.61
2.9526.65 ± 0.4
37.7 ± 0.5
max 51.9
Ø 3
1.6
±0.0
7
Mounting dimensions O-ring Product dimensions
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRO-ring NBRSpring Stainless Steel
INSERT CHECK VALVES
26
IO040 DN40
To meet the ever increasing quality requirements, Watts Industries developed the snap-in check valve type IO040. The O-ring is already mounted and fixated on the check valve, thus creating an easy to mount check valve.
Technical specificationsWorking pres. PN10 Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN40
ApprovalsKiwa NL DVGW DETA DKBelgaqua BSVGW CH
Other diameters and other closing pressures on request.
0 4 8 12 16 20 24 28 32 36 40
flow (m3/h)
100
90
80
70
60
50
40
30
20
10
delta
P (
kPa)
Pressure loss-curve
Ø 3
9.5
max
Ø 3
0.1
20.15+0.3
0min 1.0
+0.
1 0
Ø 4
1.2±
0.1
20∞
30∞
Ø 3
2.92
3.5333.3 ± 0.4
45.3 ± 0.5
max 61.6
Ø 3
9.3
±0.1
Mounting dimensions O-ring Product dimensions
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRO-ring NBRSpring Stainless Steel
INSERT CHECK VALVES
27
IO050 DN50
To meet the ever increasing quality requirements, Watts Industries developed the snap-in check valve type IO050. The O-ring is already mounted and fixated on the check valve, thus creating an easy to mount check valve.
Technical specificationsWorking pres. PN10 Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN50
ApprovalsKiwa NL DVGW DWRAS UKETA DKSVGW CHBelgaqua BNF F
Other diameters and other closing pressures on request.
0 8 16 24 32 40 48 56 64 72 80
flow (m3/h)
100
90
80
70
60
50
40
30
20
10
delta
P (
kPa)
Pressure loss-curve
Ø 4
9.6
max
Ø 3
7.7
24.3+0.3
0min 1.2
+0.
1 0
Ø 5
1.9±
0.1
20∞
30∞
Ø 4
2
4.045.8 ± 0.4
57.3 ± 0.5
max 81.0
Ø 4
9.4
±0.1
Mounting dimensions O-ring Product dimensions
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRO-ring NBRSpring Stainless Steel
INSERT CHECK VALVES
28
IW020 DN20
The Watts check valve type IW020 shows the inventive solutions of Watts Industries. Our R&D made this check valve for our customers with the same performances they are used to.Other diameters and closing pressures are also possible.
Technical specificationsWorking pres. PN10Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN20
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRO-ring NBRSpring Stainless Steel
Other diameters and other closing pressures on request.
0 0.8 1.6 2.4 3.2 4.0 4.8 5.6 6.4 7.2 8.0
flow (m3/h)
100
90
80
70
60
50
40
30
20
10
delta
P (
kPa)
Pressure loss-curve
I
max
ø 1
5.2
ø 1
6
ø 1
1+ 0
.1ø
19.
8
0
ø 20
.6 ±
0.1
+ 0.310.8 0
30˚
20˚
min 0.4
2.0
33
Mounting dimensions O-ring Product dimensions
I
max
ø 1
5.2
ø 1
6
ø 1
1+ 0
.1ø
19.
8
0
ø 20
.6 ±
0.1
+ 0.310.8 0
30˚
20˚
min 0.4
2.0
33
INSERT CHECK VALVES
29
TO015 DN15
The TO015 is specially designed for hydraulic safety groups that are fitted to the cold water supply of storage water heaters. This special valve is tested according to the EN1487and will stand a maximum half hour of heavy treatment with saturated steam up to 180°C during calamities. Due to the PPS material, the TO015 valve will keep its form and function. The lip-seal is mounted in such a way that it will survive the passage of high temperature steam during this simulated calamity.
Technical specificationsWorking pres. PN10Closing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN15Product related One time requirement destructieve test, ½ hour at 180°C with saturated steam at 8 bar.
ApprovalsNF FBelgaqua B
Other diameters and other closing pressures on request.
Material specificationsHouse PPS Valve PPSTorpedo PPSDiaphragm NBRO-ring NBRSpring Stainless Steel
max
ø 11
.5
+ 0
.1ø
18.
6
0 0ø
18.
3 -
0.1
+ 0.115.5 0
ø 1
9.2 ±
0.1
15˚
ø 15
.6
ø 18
.5 ±
0.0
5
+ 0.115.3 - 0.251.78
16.8 ± 0.5
22.8 ± 0.5
INSERT CHECK VALVES
30
WI020 DN20
The Watts check valve type WI020 shows the inventive solutions of Watts Industries. Our R&D made this check valve for our customers with the same performances they are used to.Other diameters and closing pressures are also optional.
Technical specificationsWorking pres. PN10Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN20
ApprovalsKiwa NLDVGW DBelgaqua B
Other diameters and other closing pressures on request.
0 0.8 1.6 2.4 3.2 4.0 4.8 5.6 6.4 7.2 8.0
flow (m3/h)
100
90
80
70
60
50
40
30
20
10
delta
P (
kPa)
Pressure loss-curve
min 6 min 14.5
ø 2
7 -
30
ø 3
5.7 ±
0.1
ø 3
9 m
9
ø 2
6.77
± 0
.1 0ø
35.
9 -
0.2
ø 4
3.5 ±
0.1
ø 2
4.2 ±
0.2
ø 3
6 ±
0.1
ø 4
5 ±
0.1
ø 3
9 H
7
ø 3
7 ±
0.2
min
ø 3
1.8
3.3 ± 0.14.1 ± 0.1
32.1 ± 0.5
29.75 ± 0.5
36.8 ± 0.5
22.1 ± 0.54.7 ± 0.13.5 ± 0.05
Mounting dimensions O-ring Product dimensions
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRO-ring NBRSpring Stainless Steel
min 6 min 14.5
ø 2
7 -
30
ø 3
5.7 ±
0.1
ø 3
9 m
9
ø 2
6.77
± 0
.1 0ø
35.
9 -
0.2
ø 4
3.5 ±
0.1
ø 2
4.2 ±
0.2
ø 3
6 ±
0.1
ø 4
5 ±
0.1
ø 3
9 H
7
ø 3
7 ±
0.2
min
ø 3
1.8
3.3 ± 0.14.1 ± 0.1
32.1 ± 0.5
29.75 ± 0.5
36.8 ± 0.5
22.1 ± 0.54.7 ± 0.13.5 ± 0.05
INSERT CHECK VALVES
31
WM015 DN15
The Watts slide-in check valve type WM015 features a noiseless operation, very low pressure loss and absolute sealing at high and low back pressures.The split valve stem principle guarantees a trouble free operation for many years.
Technical specificationsWorking pres. PN10 Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN15
ApprovalsKiwa NL Belgaqua BDVGW DNF FETA DKSITAC S
Other diameters and other closing pressures on request.
0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0
flow (m3/h)
100
90
80
70
60
50
40
30
20
10
delta
P (
kPa)
Pressure loss-curve
19.00
-0.1
30∞
30
-0.1
max 24.95
Ø 2
0.0
0-0
.15
Ø 1
8.3
0-0
.1
Ø 2
0.5
0-0
.2
Ø 1
8.7
+0.
2 0
21.0+0.5
03.0
0-0.2
3.2+0.1
0
Ø 1
5.3
±0.0
5
Mounting dimensions Product dimensions
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRSpring Stainless Steel
INSERT CHECK VALVES
32
WM020 DN20
The Watts check valve type WM020 features noiseless operation, very low pressure loss and absolute sealing at high and low back pressures.The split valve stem principle guarantees a trouble free operation for many years.
Technical specificationsWorking pres. PN10 Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN20
ApprovalsKiwa NL Belgaqua BDVGW DNF FETA DKSITAC S
Other diameters and other closing pressures on request.
0 0.8 1.6 2.4 3.2 4.0 4.8 5.6 6.4 7.2 8.0
flow (m3/h)
100
90
80
70
60
50
40
30
20
10
delta
P (
kPa)
Pressure loss-curve
25.50
-0.1
30∞
7 ±0.05
max 34.1
Ø 2
5.0
0-0
.15
Ø 2
2.1
0-0
.1
Ø 2
5.3
+0.
2 0
Ø 2
2.4
+0.
2 0
26.0+0.5
07.0
0-0.3
4.0+0.1
0
Ø 1
8.1
0-0
.1
Mounting dimensions Product dimensions
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRSpring Stainless Steel
INSERT CHECK VALVES
33
WM025 DN25
The Watts slide-in check valve type WM025 features noiseless operation, very low pressure loss and absolute sealing at high and low back pressures.The split valve stem principle guarantees a trouble free operation for many years.
Technical specificationsWorking pres. PN10 Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN25
ApprovalsKiwa NL Belgaqua BDVGW DNF FETA DKSITAC S
Other diameters and other closing pressures on request.
0 1 2 3 4 5 6 7 8 9 10
flow (m3/h)
100
90
80
70
60
50
40
30
20
10
delta
P (
kPa)
Pressure loss-curve
38.50
-0.1
30∞
8 ±0.05
max 40.05
Ø 3
2.0
0-0
.2
Ø 2
8.5
0-0
.1
Ø 3
2.5
+0.
1 0
Ø 3
0.0±0
.1
42.0 ±0.18.0 ±0.1
4.5+0.1
0
Ø 2
4.0
+0.
1 0
Mounting dimensions Product dimensions
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRSpring Stainless Steel
INSERT CHECK VALVES
34
WM040 DN40
The Watts slide-in check valve type WM040 features noiseless operation, very low pressure loss and absolute sealing at high and low back pressures.
Technical specificationsWorking pres. PN10 Testing pres. 1600 kPaClosing pres. 10 cm wcNom. operating temp. 65 °CPeak temp. 90 °C for 1 hour per dayDiam. nominal DN40
ApprovalsKiwa NL DVGW DETA DKBelgaqua BSITAC S
Other diameters and other closing pressures on request.
0 4 8 12 16 20 24 28 32 36 40
flow (m3/h)
200
180
160
140
120
100
80
60
40
20
delta
P (
kPa)
Pressure loss-curve
46.1 ±0.1
30˚
10 ±0.1
max 61.6
Ø 4
6.0
0-0
.3
Ø 4
0.3
0-0
.2
Ø 4
6.5+
0.05 0
Ø 4
0.5
±0.1
49.0 ±0.110.0 ±0.1
4.30
-0.1
Ø 3
3.65
±0.1
Mounting dimensions Product dimensions
Material specificationsHouse POM Valve POMTorpedo POMDiaphragm NBRSpring Stainless Steel
INSERT CHECK VALVES
35
Auxiliary mounting tools
In order to achieve a perfectly leaktight check valve construction, it is of crucial importance that mounting dimensions are respected.
On each check valve data sheet, you will find the required mounting dimensions to be created in the housing to the check valve.
In order to avoid any damage of the check valves and O-rings it is very important that check valves are mounted in the correct way.
To support positioning and mounting in the right way Watts Industries produced a mounting tool for every check valve. The dimensions of the tools are given in the data sheet below.
When an approved Watts check valve is built in in accordance with the mounting dimensions as given on the relevant check valve data sheet and when the proper auxiliary tools are used, Watts Industries ensures a check valve performance that will last for many years.
DN Model H1 ØD1 ØD2 ØD3 L1 L2 L3 L4 B1 B2 in mm in mm in mm in mm in mm in mm in mm in mm in mm 8 FI010 26° 9.6 7.85 7.4 1.65 6.15 6.15 min. 30 1.5 - 8 CO010 26° 9.9 7.85 7.4 1.65 6.15 6.15 min. 30 1.5 - 10 CO012 0° 11.6 10.2 8.7 2.9 2.9 2 min. 30 2 2.6 10 CO013 0° 12.6 10.2 8.7 2.9 2.9 2 min. 30 2 2.6 10 CO014 24° 13.9 12.85 11.9 0.5 8 8 min. 50 2 - 10 CO015 0° 15.1 12.5 11 2.5 2.5 2.5 min. 50 2 - 15 CO020 27° 15 11.75 10.8 2.5 9.5 12 min. 65 3 - 15 IN/IO/WM 27° 15 11.75 10.8 2.5 9.5 12 min. 65 3 - 20 IN/IO/WM 17° 19.7 15.8 14.5 - 14 16 min. 65 4 - 25 IN/IO/WM 23° 24.8 19.3 18 - 14 17.5 min. 75 5 - 32 IN/IO 22° 31.6 24.7 22.5 5.8 17.5 24 min. 85 3 - 40 IN/IO/WM 22° 39.3 30.7 28.5 7.3 23 30 min. 90 6 - 50 IN/IO 22° 49.4 38.6 35.5 9.4 33.5 40 min. 90 7 - Remark: dimensions are under usual reserve.
The photos, illustrations and descriptions contained in this publication are solely intended as an indication. Watts Industries reserves the right to make technical and design changes to its products without prior notice.
- Temperature Control- Expansion Vessels- Process Switches- Fuel Products- Gas Products- Electronic Controls- Installation Protection Products- Radiator Valves- System Products- Manifolds and Fittings