INSECT PHEROMONE & KAIROMONE SYSTEMS Your Edge – And Ours – Is Knowledge. MESO- ™ MESO- ™ POLE APPLICATOR ASSEMBLY AND DISPENSER USE INSTRUCTIONS: MATERIALS NEEDED: A. CIDETRAK ® CMDA COMBO MESO -A Hanger B. MESO -A Applicator Tip with hanger stabilizer insert C. CIDETRAK ® CMDA COMBO MESO -A dispenser 1. Open box at top. Fold side flaps outward and attach strap. 2. CONTENTS: 2 sets of MESO-A hangers loaded on to cardboard strip, 1 applicator tip, strap and 2 packs of MESO-A dispensers. 3. Remove one set of MESO-A hangers. Push tab down at end of cardboard strip and put hangers on side of box. 4. Remove the cardboard strip and the rubber band. 5. MESO-A hangers on side of box. Applicator tip with hanger stabilizer insert B CARRIER PACK ASSEMBLY INSTRUCTIONS: 1. Insert MESO hanger into applicator tip. A quick back and forth motion will help stabilize the MESO hanger into the “NEW” applicator tip insert. 4-5. Using PVC pipe attach dispenser securely to lateral branches as shown. APPLICATION: Attach dispenser securely to lateral branches at 10-20% of the distance between the trunk and branch terminal in the upper 1/5th of the tree canopy. 6-8. Once attached to branch, hanger will automatically reposition. 1 1 2 5 6 7 8 3. Attach MESO-A dispenser to the hanger. 3 4 4 DISPENSER USE INSTRUCTIONS: Push tab down © 2018, Trécé Inc., Adair, OK USA • TRECE, PHEROCON and CIDETRAK are registered trademarks of Trece, Inc., Adair, OK USA • TRE-1218 • 3/18 5 3 CIDETRAK ® CMDA COMBO MESO - A hanger ASSEMBLY INSTRUCTIONS: 1. Attach MESO APPLICATOR TIP TO ¾” PVC pipe 1 A 2. MESO hanger must be touching the bottom of the applicator tip. As shown. 2 Side view End view CIDETRAK ® CMDA COMBO MESO -A dispenser C