Inquiry Sheet Centrifugal Pumps *Fields marked with an asterisk are mandatory for a pump selection. V2.1-2015 GEA Sanitary Pumps CONTACT DATA Company: __________________________________________________________________ Contact person: ______________________ e-mail: _____________________________ Phone: _____________________________ Customer No: ________________________ PREFERED VENDOR GEA Hilge GEA Tuchenhagen no requirement LIQUID DATA *Liquid: _______________________________________________________________ *Liquid temperature [°C]: ________ yes *Density [kg/dm³]: ________ ________ Viskosity [mPas]: Conentration [%]: ________ Solids: no Kind of solids: _______________ Size of solids [mm]: ________ abrasiv: no yes OPERATING CONDITIONS _________ no yes _________ __________ Inlet pressure (NPSHa) [m]: Suction head [m]: System pressure: _________ Vacuum at inlet: Vacuum, abs. [mbar]: Gas content: no <5% >5% end-suction pump self-priming pump Cleaning / Sterilisation CIP: no yes _____ _____ SIP: no yes SIP Temperature [°C]: _____ SIP Duration [min]: _____ CIP Temperature [°C]: CIP Flow [m³/h]: CIP Head [m Fls]: _____ PUMP EXECUTION *Connection Type: Connection Size DNI / DNO: ______/________ Drain port: no DIN 11851 DIN 11853-2 / 11864-2 Other: ________________________ yes: ________________ Execution & Design Pump in Bloc version Pump in Bloc version with bearing bracket and standard motor Pump in long coupled version with base plate and standard motor with stainless steel motor shroud on calotte feet horizontal on trolley vertical Duty point 2: Flow [m³/h]: _________ Head [m lc]: __________ *Duty point 1: Flow [m³/h]: _________ Head [m lc]: __________
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Inquiry Sheet Centrifugal Pumps
*Fields marked with an asterisk are mandatory for a pump selection. V2.1-2015
GEA Sanitary Pumps
CONTACT DATACompany: __________________________________________________________________
Contact person: ______________________ e-mail: _____________________________
Phone: _____________________________ Customer No: ________________________
PREFERED VENDORGEA Hilge GEA Tuchenhagen no requirement
LIQUID DATA*Liquid: _______________________________________________________________
*Liquid temperature [°C]: ________ yes
*Density [kg/dm³]: ________
________ Viskosity [mPas]:
Conentration [%]: ________
Solids: no
Kind of solids: _______________
Size of solids [mm]: ________
abrasiv: no yes
OPERATING CONDITIONS
_________ no yes_________ __________
Inlet pressure (NPSHa) [m]:
Suction head [m]:
System pressure: _________
Vacuum at inlet:
Vacuum, abs. [mbar]:
Gas content: no <5% >5%
end-suction pump self-priming pump
Cleaning / Sterilisation
CIP: no yes
_____
_____
SIP: no yes
SIP Temperature [°C]: _____
SIP Duration [min]: _____
CIP Temperature [°C]:
CIP Flow [m³/h]:
CIP Head [m Fls]: _____
PUMP EXECUTION*Connection Type:
Connection Size DNI / DNO: ______/________
Drain port: no
DIN 11851
DIN 11853-2 / 11864-2
Other: ________________________ yes: ________________
Execution & DesignPump in Bloc version
Pump in Bloc version with bearing bracket and standard motor
Pump in long coupled version with base plate and standard motor
with stainless steel motor shroud
on calotte feet
horizontal
on trolley
vertical
Duty point 2: Flow [m³/h]: _________ Head [m lc]: __________*Duty point 1: Flow [m³/h]: _________ Head [m lc]: __________
Inquiry SheetCentrifugal Pumps
*Fields marked with an asterisk are mandatory for a pump selection. V2.1-2015
GEA Sanitary Pumps
Surface Roughness
not specified
Ferrite Contentnot specifiedFe < 1% Ra ≤ 3.2 µm
Ra ≤ 0.8 µm
Ra ≤ 0.4 µm
Shaft Seal single mechanical seal
flushed mechanical seal
pressurised mechanical seal back-to-back
Material Shaft Seal Elastomere
EPDM
FKM (Viton)
other: ___________________
Carbon / Stainless Steel
SiC / SiC
Carbon / SiC
other: ________________
MOTOR DATA
Supply voltage:
3~ 460V / 60 Hz
3~ 200V / 60 Hz
3~ 380V / 60 Hz
other:_________________
3~ 400V / 50 Hz
3~ 200V / 50 Hz
Motor Speed [1/min]: ___________ Thermistors: yes no
Variable speed drive:
no yes: external frequency converter
integrated frequency converter
no yes Explosion proofed:
ATEX: no yes: ___________
___________
Ex-Zone:
Temperature class:
Ambient temperature [°C]: ___________
CERTIFICATES & DOCUMENTATION
FDA declaration of conformity EHEDG
Inspection certificate 3.1 acc. to DIN EN 10204
Test report 2.2 acc. to DIN EN 10204
Surface roughness test report
Delta Ferrite test report
further certificates and documentation: ________________________________________
FURTHER INFORMATION
Related Documents
