INNOVATION NEVER RESTS BESAFEPRO.COM 706.705.1500 TE540 IOM REV 07/2019 | 1 LIGATURE RESISTANT PROTECTIVE TV ENCLOSURE #TE540 Installation Guide 1. Carefully unwrap the enclosure components. DO NOT CUT OPEN. Use caution as to not scratch or cross-thread aluminum frame and screws. 2. Install the eight (8) corner connectors on the front and back panels with the 1/4’’-20 x 3/4’’ button head screws. Be sure to hand tighten only. 3. Install the four (4) horizontal corner posts on the rear frame with 1/4’’-20 x 3/4’’ button head screws. Be sure to hand tighten only. 4. Snap the four (4) corner caps to the four corners of the rear frame. Secure the corner caps using the small Pin Head Torx Screws with the included bit. Be sure to hand tighten only. 5. Center the the rear frame over the TV and mark all four (4) corners of the frame on the wall with a pencil. Be sure to also mark the wall under the top frame for height. Using a minimum 24’’ level (48’’ preferred level). Extend the upper frame pencil mark in each direction. If a TV was previously installed, you may now remove it from the wall. CAUTION: Do not use power tools assembling the enclosure frame to avoid cross threading the frame. NOTE: Once frame is installed it is recommended that wall be painted flat black for aesthetic purposes. corner caps
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
INNOVATION NEVER RESTS
BESAFEPRO.COM706.705.1500
TE540 IOMREV 07/2019 | 1
LIGATURE RESISTANT PROTECTIVE TV ENCLOSURE #TE540
Installation Guide
1. Carefullyunwraptheenclosurecomponents.DONOTCUTOPEN.Usecautionastonotscratchorcross-threadaluminumframeandscrews.
2.Installtheeight(8)cornerconnectorsonthefrontandbackpanelswiththe1/4’’-20x3/4’’buttonheadscrews.Besuretohandtightenonly.
3.Installthefour(4)horizontalcornerpostsontherearframewith1/4’’-20x3/4’’buttonheadscrews.Besuretohandtightenonly.
4.Snapthefour(4)cornercapstothefourcornersoftherearframe.SecurethecornercapsusingthesmallPinHeadTorxScrewswiththeincludedbit.Besuretohandtightenonly.
5.CenterthetherearframeovertheTVandmarkallfour(4)cornersoftheframeonthewallwithapencil.Besuretoalsomarkthewallunderthetopframeforheight.Usingaminimum24’’level(48’’preferredlevel).Extendtheupperframepencilmarkineachdirection.IfaTVwaspreviouslyinstalled,youmaynowremoveitfromthewall.
CAUTION: Donotusepowertoolsassemblingtheenclosureframetoavoidcrossthreadingtheframe.
NOTE: Onceframeisinstalleditisrecommendedthatwallbepaintedflatblackforaestheticpurposes.
corner caps
BESAFEPRO.COM706.705.1500
TE540 IOMREV 07/2019 | 2
6.Holdtherearframeagainstthewallonthelevelpencilmarkandmarktheupperfastenerlocations.Installwallanchorsinthewallatupperlocations.
7.Temporarilyfastentheframetothewallattheupperlocationsonly.
8.Afterattachingtheframetothewallwiththeupperfeetonly,checktomakesurethetopislevelandthesidesareplumbbeforemakingtheholesforthelowerfeet.
9.Withtheframehanginglevel,markthethree(3)mountingfeetlocationsonthelowerframe.Removetheframeandinstallthelowerframewallanchors.
10. Loosenthefeetonthelowerframesothattheyareabletomoveeasily.Thisiscriticaltoloosenthefeetonthebottomsotheframeisnotrackedsideways.Reinstalltheframewiththeupperfastenersonly.Slidethethelowerfeettomatchthewallanchors.Tightenthelowerfeetintothewallanchors.Yourframeshouldnowbefastenedtothewallinsix(6)locations.
11.Youmaynowre-mounttheTVtowallinsideassembledframe.
12. Slidethetop,bottom,andsidepiecesintotheframewiththemattefinishsidesfacingout.Theusbconnectiononthefanshouldbefacingtotherearoftheframe.Connectthemaleusbcableintothefemaleportofthefanunit.TheotherendoftheusbcablewilleitherplugdirectlyintothebackoftheTVorintothesuppliedpoweradapter.
13. RemovetheprotectivepaperfromtheLexanframecoverandcleantheinsidewiththesuppliedcleaningwipes.
BESAFEPRO.COM706.705.1500
TE540 IOMREV 07/2019 | 3
Tools Required for Assembly• 3’level(24’’minumum,40’’preferred)• HexBit• HandScrewdriverforhexbit• Toolstoinstallanchorinsubstrate(varies)• Pencil
Parts Included for Assembly• Backframewithmountingfeet• Frontframewithpolycarbonatepanel• Screwsforassembly• FanUSBpowersupply• 4sideposts• Top,bottom,andsidepanels• A5/32’’hexallenwrench• Cornercapswithtamperresistantscrews• Sideblockswithtamperresistantscrewsand
blacksilicone• Clearsiliconeforsealingsidepanels• Brillianizecleaningkit
Theenclosureisacustomnon-returnableproduct.Anydefectswillbeaddressedasarepairorreplaceoption.Pleasecarefullyinspectallcomponentsforanyshippingdamageormanufacturingdefects.Ifyourenclosurehascoolingfans,theyarepoweredbyaUSB.IfyourTVhasaspareUSBport,itshouldpowertheTVandturnoffandonwithit,otherwiseaUSBpowersupplyhasbeenincluded.
14. Usingtwopeople,alignandslidethesides,top,andbottompanelsintothefrontpanelchannelsuntilpanelispushedcompletelyin.
15. Inserttheremainingfour(4)1/4’’–20x3/4’’buttonheadscrews(approximately2turnstoallowforadjustment).Oncetheframeissquareandproperlyaligned,tightendownthefourcornerscrewstolocktheunitsnuglytogether.
16. Snapintheremainingfour(4)cornercapsandinstallthefour(4)smallpinheadtorxscrewsinthefrontfour(4)corners.Thecornersofthefrontpanelhavebeensealedpriortoshipment.Usethesuppliedclearsiliconetosealthecornersonthetop,sideandbottompanels.
17.Takethetwo(2)suppliedsideblocksandscrewthemintotheslopedtopwheretheframemeetsusingthesuppliedpinheadtorxscrews.Fillanygapswiththesuppliedblacksilicone.Theenclosureisnowreadyforuse. side
blocks
CAUTION: Aluminumisaverysoftmaterialandispronetodamagewhenusingpowertools.PleaseuseonlyhandtoolswhenassemblingtheTVEnclosuretopreventanyunnecessarydamage.
Related Documents
