_INNOVATIONS New products, convincing performance. Product innovations Edition 2012-2 Turning, drilling, threading, milling, adaptors
Wal
ter
prod
uct
inno
vati
ons
· Edi
tion
201
2-2
_INNOVATIONS
New products, convincing performance.
Prin
ted
in G
erm
any
629
0092
(08/
2012
) EN
Walter GB LTD. Bromsgrove, England +44 (1527) 839 450, [email protected] Walter Wuxi Co. Ltd. Wuxi, Jiangsu, P.R. China +86 (510) 8241 9399, [email protected] Walter AG Singapore Pte. Ltd. +65 6773 6180, [email protected] Walter Korea Ltd. Anyang-si Gyeonggi-do, Korea +82 (31) 337 6100, [email protected] Walter Tools India Pvt. Ltd. Pune, India +91 (20) 3045 7300, [email protected] Walter (Thailand) Co., Ltd. Bangkok, 10120, Thailand +66 2 687 0388, [email protected] Walter Malaysia Sdn. Bhd. Selangor D.E., Malaysia +60 (3) 8023 7748, [email protected] Walter Australia Pty. Ltd. Hallam, Victoria 3803, Australia +61 3 8793 1000, [email protected] Walter Tooling Japan K.K. Nagoya, Japan +81 (52) 723 5800, [email protected] Walter USA, LLC Waukesha WI, USA +1 800-945-5554, [email protected] Walter Canada Mississauga, Canada [email protected]
Walter AG
Derendinger Straße 53, 72072 Tübingen Postfach 2049, 72010 Tübingen Germany www.walter-tools.com www.facebook.com/waltertools www.youtube.com/waltertools
Product innovations Edition 2012-2
Turning, drilling, threading,milling, adaptors
You will find the complete tool range of our three competence brands Walter, Walter Titex and Walter Prototyp in the new 2012 edition of the general catalogue and in this new products brochure for 2012-2 “New products, convincing performance”. It replaces the previous brochure 2012-1 “The right choice, guaranteed”.
They contain all the precision tools you need in your production facilities for turning, boring, milling and threading.
We will be pleased to send you the new general catalogue on request.
= the full range of tools
Walter general catalogue+ new products brochure
_A COMPENDIUM Of ExPERTISE IN MACHINING
Turning, drilling, threading, milling, adaptors
Complete Catalogue
_INNOVATIONS
Turning, drilling, threading, milling, adaptors
Product innovationsEdition 2012-2
New products, convincing performance.
Engineering what you envision requires the right tools. Tools for turning, milling, drilling and threading. But it also takes heart and soul. From the initial inspiration to the final application. With the competence brands of Walter, Walter Titex, Walter Prototyp and Walter Multiply, you acquire more than just tools from us, because we do all we can to understand and satisfy the requirements of our customers. We concentrate on the application and what the customer wants to achieve. We help customers to turn their ideas into a reality. In doing so, perfection is for us the most important thing. It is the easiest way to achieve productivity and efficiency, and the only way to turn vision into reality.
Expect more. Engineer what you envision.
TURNING VISIONS INTO REALITY.
TURNING Walter ¤3¤
ISO turning ¤4¤
Grooving ¤14¤
Ordering information ¤20¤
DRILLING AND THREADING Walter Titex ¤39¤
Solid carbide drills ¤40¤
PCD drills ¤56¤
Ordering information ¤58¤
Walter ¤91¤
Drills ¤92¤
Counterbore drills ¤96¤
Precision boring ¤97¤
Ordering information ¤98¤
Walter Prototyp ¤103¤
HSS-E-PM taps ¤104¤
HSS-E taps ¤106¤
Solid carbide thread formers ¤110¤
Solid carbide thread mills ¤112¤
Ordering information ¤114¤
MILLING Walter Prototyp ¤155¤
Solid carbide end mills ¤156¤
Ball-nose end mills ¤162¤
Ordering information ¤166¤
Walter ¤177¤
The new generation of cutters ¤179¤
Cutting tool materials ¤182¤
Face mills ¤186¤
Copy mills ¤190¤
Ordering information ¤192¤
Walter adaptors ¤217¤
Adaptors ¤218¤
Ordering information ¤220¤
Alphanumeric index ¤228¤
Product innovations Edition 2012-2
Turning
_TOOL INNOVATIONS IN TURNING
Higher speed, greater efficiency.
4
ISO TURNING
Reliable, productive, cost-effective – the new Walter ceramic solution for machining high temperature alloys.
Ordering information can be found from page ¤25¤ onwards.
WIS10 and WWS20 are the two new ceramic cutting tool materials designed to meet the special requirements involved in machining high temperature alloys. Cutting speeds, which are 5 to 10 times higher than those used for carbide index-able inserts, require stable processes and make the WIS10 and WWS20 the economical choice for machining aircraft turbine components, for example.
NEW2012
THE APPLICATION
– Machining high temperature alloys such as Inconel, Waspalloy and Stellite in forged, cast or premachined form
– Turbine components for aerospace technology – Components for power engineering, such as rings, blades and shafts
– Components with high corrosion resistance for oil, petrochemical and medical engineering applications
– For turning and milling
WIS10 (ISO S10)
– Sialon ceramic based on silicone nitrides and aluminium oxide
– Maximum chemical resistance and outstanding resistance to shear wear
– WIS10 can be used for any type of high temperature alloy, particularly in semi-finish machining processes with stable machining conditions
– Basic insert shapes: RN, SN, CN, RC and RP
WIS10 Sialon ceramic
WWS20 Whisker ceramic
5Walter – Turning
WIS10 and WWS20 ceramic cutting tool materials.
Cutting edge design
YOUR ADVANTAGES
– Shorter machining times due to cutting speeds which are 5 to 10 times higher with WIS10 and WWS20 ceramic cutting tool materials
– Maximum chemical resistance and optimum wear characteristics ensure longer tool life
– One supplier for ceramic (WIS10 and WWS20) and carbide cutting tool materials (WSM10 and WSM20) for machining an extremely wide variety of different high temperature alloys which have undergone any type of treatment
WWS20 (ISO S20)
– Aluminium oxide ceramic reinforced with Whisker silicon carbides
– Higher level of toughness than WIS10 – WWS20 is used primarily for machining Ni-based high tem-perature alloys with unfavourable machining conditions, for example roughing forged surfaces with a fluctuating depth of cut
– A secondary application is the machining of hardened steel – Basic insert shapes: RN, SN, CN, DN, RC and RP
Range of applications
WIS10Sialon ceramic
Carbide Tiger·tec® grades WSM10–WSM20
Machining conditions
Cutting speedvc [m/min]
350
250
150
50
WWS20Whisker ceramic
Finishing• Demanding
requirements for surface finish quality
• Low depth of cut• Increased hard-
ness
Medium machining• Premachined
surfaces• Constant depth
of cut• Heat-treated• Increased hard-
ness
Roughing• Forged/cast
surfaces• Fluctuating depth
of cut• Before heat treat-
ment• Low level of hard-
ness
E
– Second choice – Good machining conditions – Lower feed rates and depths of cut – Lower cutting forces
T01020
– First choice – For heavy-duty machining operations which require a very stable cutting edge
– High feed rates – Machining interruptions
0,1
20°
Cutting edge rounding
6
ISO TURNING
Walter Turn – turning toolholder for ceramic inserts.
Ordering information can be found from page ¤33¤ onwards.
TOOLHOLDER FOR RNGN, RCGX AND RPGX INDEXABLE INSERTS
– Square shank tools for smooth and V-support ceramic inserts without a hole
– Clamping system with carbide clamping plate, particularly suited to ceramic inserts without a hole
– Pre-assembled toolholder available for RNGN, RCGX and RPGX indexable inserts
NEW2012
TOOLHOLDER FOR CNGN, DNGN AND SNGN INDEXABLE INSERTS
– Set of assembly parts for converting the Walter Turn tool-holder clamping system (D) into a clamping system with a carbide clamping plate (C), for ceramic inserts without a hole
– Set contains: clamp, screws, pressure spring, carbide clamp-ing plate, hook for clamping plate and wrench for the hook bolt
– When combined with the appropriate shim, this set can be used for C, D and S basic insert shapes
YOUR ADVANTAGES
– Stable clamping system for reliable processes – Reduced machine times as a result of higher cutting speeds
– High level of flexibility since the clamps can be replaced for carbide or ceramic inserts
THE APPLICATION
– First choice for machining high temperature alloys with Walter ceramic types WIS10 and WWS20
– Turning Inconel with cutting speeds of up to 350 m/min – Cast iron machining with ceramic inserts
Turning toolholder for ceramic inserts
Watch product video: Scan QR code
or go directly to http://goo.gl/KnwG3
7
ISO TURNING
Walter NMS and NRS – two geometries specially designed for high temperature alloys.
7Walter – Turning
Typical NMS / NRS Applications
– Machining of HRSAs such as Inconel 718, Waspalloy – Used in the aerospace industry e.g. turbine casings, turbine discs
– Measuring instruments for the oil and gas industry – Valves and pump components for the chemical industry – Extended application to ISO M, e.g. austenitic stainless steels 1.4571
NMS GEOMETRYMedium machining/semi-finishing
– Sharp cutting edge for low cutting pressures, which reduces the generation of heat when machining HRSAs
– Good chip breaking – avoids chip hammer – Basic shapes: C, D, T, V, W
NRS GEOMETRYRoughing
– Sharp cutting edge combined with a robust cutting lip for machining high-strength ISO S materials
– Machining of forged and cast surfaces – Basic shapes: C, D, S
YOUR ADVANTAGES
– Low cutting pressures which enable reliable machining of unstable components (such as turbine casings) and reduce heat development when machining HRSAs
– Tiger·tec® PVD aluminium oxide cutting materials WSM10 and WSM20 with heat shield for higher cutting speeds
– NMS and NRS geometries achieve an increase in tool life of up to 150%
NMS inserts: Medium machining/semi-finishing
NRS inserts: Roughing
Machining conditions
16
10
6.3
4.0
2.5
1.6
1.0
0.63
0.4
0.25
0.16
0.10.025
0.040.063
0.10.16
0.250.4
0.631.0
1.6
ap [mm] Depth of cut
f [mm]Feed
2.5
Sharp cutting edge (microgeometry)
Large rake angle (macrogeometry)
Short, robust and positive primary land
Cross-section: NRS
NRS
NMS
8
ISO TURNING
Walter Tiger·tec® Silver ISO P generation:Steel machining with bite.
Ordering information can be found from page ¤20¤ onwards.
A STRONG DOUBLE ACT CREATES A NEW GENERATION
By combining new cutting materials and new geometries, we have created a new generation: the Tiger·tec® Silver ISO P Generation. We have combined our unique Tiger·tec® Silver CVD coating with a brand new type of universal geometry range for machining steel. The result is inspirational: The Tiger·tec® Silver ISO P Generation delivers increases in output of up to 75% in the turning of steel.
NEW: ground contact surface after coatingIncreased process reliability with interrupted cuts
NEW: Silver flank faceIndicator coating for easy wear detection
NEW: Aluminium oxide with optimised microstructure+50% higher tool life experienced due to improved crater wear resistance
NEW: Microedge technology+ 30% longer tool life due to resistance to flank wear or plastic deformation
NEW: Mechanical post-treatmentUnique residual stress state, increased
process reliability in mass production
NEW: ISO P geometriesLarge, universal chip breaking area
and longer tool life
PROGRAMME ADDITIONS
2012
9Walter – Turning
Tiger·tec® Silver ISO P generation
In the Tiger·tec® Silver ISO P generation, four geometries have been developed in parallel and matched to each other. The range of supported ap-plications has been increased by 20 to 40% in com-parison with previous geometries. The result: The entire application area in steel machining has been covered.
New grades for steel (ISO P) New geometries for steel (ISO P)
Dept
h of
cut
[mm
]
Feed [mm]
good medium unfavourable
WPP30STiger·tec® Silver
WPP20STiger·tec® Silver
WPP10STiger·tec® Silver
Wea
r res
ista
nce
Toughness
MP3
MP5 RP5
FP5
Up to
75% increase in output
THE CUTTING MATERIALS
WPP10S (ISO P10)
– Excellent wear resistance – Continuous cut to light interrupted cuts
WPP20S (ISO P20)
– Universal cutting material, for approx 50% of all applications – Can be used from roughing through to finishing – Adds reliability to automated production
WPP30S (ISO P30)
– Tough cutting material for interrupted cuts or unstable conditions
– Maximum machining reliability
THE GEOMETRIES
10
Watch product video: Scan QR code
or go directly to http://goo.gl/frwc2
Tiger·tec® Silver APPLICATION RANGE
Increased wear resistance
Increased toughness
Toughness
Tiger·tec® Silver
Tiger·tec®
Competition
Wea
r res
ista
nce Competitors
Tensile stresses/ risk of fracture
Tiger·tec® Silver
Compressive stress in the coating from mechanical post-treatment
Competitors
Conventional aluminium oxide
Tiger·tec® Silver
Aluminium oxide with optimised microstructure
ISO TURNING
Walter Tiger·tec® Silver ISO P generation:Steel machining with bite.
YOUR ADVANTAGES
– Tiger·tec® Silver ISO P generation – up to a 75% in-crease in output due to new geometries and new grades
– Increased productivity due to a new aluminium oxide with optimised microstructure
– Increased process reliability under dynamic loads as a result of mechanical post-treatment and the contact surface being ground after coating
– Problem-free chip removal due to the large, universal breaking area of the new ISO P geometries and a reduced number of geometries in production
Ordering information can be found from page ¤20¤ onwards.
PROGRAMME ADDITIONS
2012
11
FIELD OF APPLICATIONS FOR NEW ISO P GEOMETRIES
Feed
FP5 GEOMETRY: Finishing, steel
MP3 GEOMETRY: medium machining long-chipping steel materials
MP5 GEOMETRY: medium machining steel materials in general
RP5 GEOMETRY: Roughing, steel
Cutt
ing
dept
h
TURNING CAMSHAFTS – CONSTANT INTERRUPTED CUTS
Workpiece material: 47CrMo44 (1.2341)Tensile strength: 950 –1050 N/mm²Indexable insert: CNMG160612-RP5Cutting tool material: WPP10S Tiger·tec® SilverTool: PCLNL3225P16
Cutting dataCompetitionISO P30
Tiger·tec® Silver WPP30S
vc 220 m/min 220 m/minf 0.4 mm 0.4 mmap 2.5 mm 2.5 mmTool life 55 components 110 components
Comment: No notching on the insert at the depth of cut, which therefore reduces burr formation on the component.
Workpiece material: 16MnCr5 (1.7131)Tensile strength: 600 –700 N/mm²Indexable insert: DNMG150608-MP5Cutting tool material: WPP30S Tiger·tec® SilverTool: DDJNR2525M15
Cutting dataCompetitionISO P15
Tiger·tec® Silver WPP10S
vc 165 m/min 200 m/minf 0.55 mm 0.6 mmap 4 – 6 mm 4 – 6 mmTool life 7 components 11 components
Comment: Customers can also use the CNMG160612-RP5 WPP10S insert successfully on GGG70 components. The number of different indexable inserts in production has been reduced.
Number of components comparison
0 2 864 10
Competition 7
Tiger·tec® Silver RP5 WPP10S 11
Components
12
+ 57%
Number of components comparison
0 25 1007550 125
Competition 55+ 100%
Tiger·tec® Silver MP5 WPP30S 110
Components
Turning camshafts – constant interrupted cuts Gear hub roughing Ø 750 mm – internal machining
Walter – Turning
12
ISO TURNING
Walter Turn – toolholders for small indexable inserts that conserve resources and reduce costs.
THE INDEXABLE INSERTS
New inserts in C, S and T basic shapes with IC 9.53 mm in the outstanding Tiger·tec® Silver coating. Available in geometries FP5 and MP3.
THE TOOLS
Boring bars
– Basic shapes C and T – Lead angles of 95° and 91° – Round shank with 3 clamping surfaces allow maximum flexibility
– Internal coolant supply on all tools – Dmin Ø range 20–32 mm – Boring bar diameters of 16, 20, 25 mm – Reliable lever type clamping
ISO external holders
– Basic shapes C, S, T – Lead angles of 95°, 45° and 91° – Square shanks 12x12, 16x16, 20x20 and 25x25 mm – Clamping screw can be accessed from above or below – Reliable lever type clamping
ISO toolholders with clamp
– Basic shapes C, S, W – Lead angles of 95° and 45° – Shank sizes 16x16, 20x20 and 25x25 mm – Easy-to-handle clamping system – Top clamping type D
THE APPLICATION
– Toolholders for internal and external machining – For longitudinal and face turning – Machining of small depths of cut and small component diameters using negative inserts
YOUR ADVANTAGES
– Cost-saving and resource-sparing as the indexable insert contains less material
– Maximum productivity when combined with Tiger·tec® Silver cutting tool materials
– Optimum insert product range matched to toolholders
CNMG 0903 . . SNMG 0903 . . TNMG 1103 . .
DOWNSIZING FOR INSERTS
For operations in which, for example, a CNMG1204 . . insert is currently used, a small CNMG0903 . . insert can be used in many cases. In this way, not only can you make your production process more cost-effective but you can also conserve resources.
NEW NEWNEW
Ordering information can be found from page ¤29¤ onwards.
13
ISO TURNING
Walter Turn – lever type clamping:expanded boring bar range.
THE TOOLS
– Steel shank with three clamping surfaces allow maximum flexibility
– Internal coolant supply on all tools – Boring bars for insert basic shapes C, D, S, T and W – Boring bar diameters of 16, 20, 25, 32 and 40 mm – Reliable lever type clamping
THE APPLICATION
– First choice for indexable inserts with negative basic shape and for machining large depths of cut
– Suitable for machining in small diameter ranges with nega-tive indexable insert
Walter – Turning
YOUR ADVANTAGES
– Unobstructed chip evacuation – Stable clamping of insert – Cutting edges on contact surface protected by edge on shim
– Coolant fed directly to cutting edge, enabling higher cutting data and longer tool life
THE COOLANT ADAPTOR – K600
– For sealing boring bars with clamping surfaces – Easy connection to the machine – No screw thread is needed – Easy to shorten the boring bar – Can be used as standard up to a coolant pressure of 80 bar
Steel shank design
NEW: Connection for coolant adaptor
NEW: 3 clamping surfacesNEW: Internal coolant supply
Special shim with edge to prevent chip impact and to
protect the contact surface of the cutting edges
Reliable lever type clamping
14
GROOVING
Walter Tiger·tec® Silver – PVDWear resistance and toughness are not a contradiction.
Micrograin substrate• High level of hardness• High level of toughness
Indicator layer• Maximum tool life due to easy
wear detection• Easy detection of unused
cutting edges
Coating• Low thermal load for substrate due to
Al2O3 layer• Low friction due to improved surface
structure• Better wear properties due to greater
layer hardness
Cutting edge quality• High-precision microgeometries
guarantee consistent tool life• High stability of the cutting edges
due to micrograin substrate• Sharp cutting edge due to reduced
coating thickness
Thermal loading of carbide
Surface structure of coating
COMPARISON Competition Tiger·tec® Silver PVD
High thermal loading of carbide Thermal protection by Al2O3
High friction due to surface structure Reduced friction due to improved surface
Chip
Cutting edge Cutting edge
Chip
Al2O3Wor
kpie
ce
Wor
kpie
ce
Conventional PVD layer
NEW2012
Ordering information can be found from page ¤26¤ onwards.
15Walter – Turning
Wear resistance
Toughness
PVD Al203
Tiger·tec® Silver PVD
THE CUTTING MATERIALS
WSM13S – (ISO P10, ISO M10, ISO S10)• Maximum resistance to temperature and wear in the
machining of steel and of stainless and HRSA materials• For finishing and medium machining where interruptions
in cut exist
WSM23S – (ISO P20, ISO M20, ISO S20)• Resistance to temperature and wear in the machining of
steel and of stainless and HRSA materials• For use in stable conditions, with high cutting speeds and
application of coolant
WSM33S – (ISO P30, ISO M30, ISO S30)• First choice in the machining of steel and of stainless and
super-heat-resistant alloys• For use under normal conditions• Covers the majority of applications• Combination of outstanding wear resistance and a high
degree of toughness
WSM43S – (ISO P40, ISO M40, ISO S40)• Maximum toughness and process reliability in the machining
of steel and of stainless and HRSA materials• Ideal grade for machining where there are interruptions in
cut, low speed unstable workholding or unstable machine conditions
YOUR ADVANTAGES
– Unique combination of thermal stability and toughness ensures unbeatable cost efficiency
– Maximum process reliability due to improved stability of cutting edges
– Low tendency for build-up on the cutting edge due to improved surface structure and sharp cutting edge with thin Tiger·tec® Silver PVD Al2O3 coating
– Longer tool life due to improved layer hardness – Universal cutting tool material covering different ISO material groups
– Excellent machining results due the to use of Tiger·tec®
Silver PVD technology in conjunction with Walter Cut geometries
Watch product video: Scan QR code
or go directly to http://goo.gl/u3dxw
Previous PVD grades
Overview of Tiger·tec® Silver cutting materials
WSM13S
WSM23S
WSM33S
WSM43S
Toughness
Wea
r res
ista
nce
GROOVING
Walter RF8 geometry – the insert with fully ground circumference for easy cuts.
16
THE INSERT
– Full radius insert – Circumference fully ground – Sharp cutting edge for reduced cutting forces – Positive primary chamfer to stabilise cutting edge – Insert widths of 3 mm, 4 mm, 5 mm, 6 mm – Indexable insert size GX24 – Double ended insert – Tiger·tec® Silver grades
THE APPLICATION
– Machining of ISO S materials such as Inconel 718, Waspalloy – Profiling applications in the aerospace industry, e.g. engine components
– Machining of ISO M materials – 230° cutting edge – Finishing of ISO P materials – Profiling of unstable components for reduced cutting forces – For outstanding surface finish quality – For radial and axial machining
YOUR ADVANTAGES
– Maximum cost efficiency in the machining of ISO S materials through the use of the most state-of-the-art cutting tool materials and geometries
– Excellent surface finish quality due to cutting edge with fully ground circumference
– Machining angle > 180° enables production of undercuts
230°
Positive primary chamfer to stabilise cutting edge
High positive rake angle
Application area
16
10
6.3
4.0
2.5
1.6
1.0
0.63
0.4
0.25
0.16
0.10.025
0.040.063
0.10.16
0.250.4
0.631.0
1.6
ap [mm] Cutting depth
f [mm]Feed
2.5
s = 3 mm s = 4 mm s = 5 mm s = 6 mm
Ordering information can be found from page ¤28¤ onwards.
GROOVING
Walter RD4 geometry – the versatile full radius insert for all operations.
THE INSERT
– Full radius insert – Two geometries in one cutting insert – Insert widths of 3 mm, 4 mm, 5 mm, 6 mm – Cutting insert size GX24 – Double ended insert – Tiger·tec® Silver grades
THE APPLICATION
– For grooving on all types of lathe – For profiling – For axial grooving, radial grooving and recessing
Section A-AStable cutting edge
• Longer tool life• Increased process reliability
Section B-BDouble geometry enabling chip breaking
• in grooving operations• in profiling applications
a
a
bb
YOUR ADVANTAGES
– Outstanding chip control when grooving and profiling – Chip breaking even at low cutting depth and feed rates – Ultra modern Tiger·tec® Silver cutting tool materials for excellent results
Axial grooving Gearwheel
Workpiece material: 16MnCr5 (1.7131)Insert: GX24-3E400N200-RD4Cutting tool material: WPP23 – Tiger·tec®
Tool: G1111.2525L-4T20GX24
Cutting data
Competition Tiger·tec®
vc 180 m/min 200 m/minf 0.12 mm 0.20 mmCutting depth 7 mm 7 mmTool life 400 components 600 components
Number of components comparison
0 300200100 600 Components500400
Competition 400
+50%
Tiger·tec® WPP23 600
Comment: – Outstanding chip control – Shorter process time due to higher feed rate and faster cutting speed – Greater process reliability
17Walter – Turning
GROOVING
Parting off precision with the new Walter Cut GX system.
18
THE TOOLS
G 1042 Deep parting blade – Optimum insert seat design – 4-point clamping – User-friendly self-clamping system
G 1041 Reinforced parting blade – Screw clamping – Right and left hand tools available – Contra version available
G 1011 Monoblock tool – Screw accessible from above and below – Low tool head height for easy chip removal – For grooving, parting off and recess turning
XLDE monoblock tool – Easy access to the clamping screw – Outstanding performance on multi-spindle machines and Swiss style auto lathes
– Contra version available
Reflex point 1 Reflex point 2
THE APPLICATION
– For grooving, parting off and recessing on all types of lathe
– Grooving down to a depth of 23 mm and parting off up to a diameter of 46 mm with a double ended insert
– Grooving and parting off to a greater cutting depth from the same tool with a single ended insert
YOUR ADVANTAGES
– State-of-the-art tool technology for grooving and parting off
– One system for all grooving applications – All common tool types for grooving and parting off
4-point clamping
Standard Contra
Screws accessible from above and below
Standard Contra
For ordering information, see the 2012 Walter general catalogue.
19Walter – Turning
THE GEOMETRIES
CF6 – the sharp one – Extremely low burr and pip formation
– Right and left hand inserts available
– For small diameters and thin-walled tubes
CF5 – the positive one – Low burr and pip formation – Right and left hand inserts available
– For long-chipping work-piece materials
CE4 – the universal one – Stable cutting edge – Right and left hand inserts available
– Excellent chip formation
Parting off ball bearing race
800 900 10007006005004003002001000
Workpiece material: 100Cr6 (1.3505)Cutting insert: GX16-1E200N020–CE4Cutting tool material: WSM33S – Tiger·tec® SilverTool: G1011.2020L-2T8GX16
Cutting data
Competition Tiger·tec® Tiger·tec® Silvervc 150 m/min 150 m/min 170 m/minf 0.08 mm 0.1 mm 0.1 mmCutting depth 8 mm 8 mm 8 mmTool life 450 components 800 components 950 components
Comment: – More consistent tool life – Improved flatness of parted surfaces – Outstanding chip control
Number of components comparison
Cutting edge
Feed
CF6
Low High
Shar
p St
able
CF5
CE4
Fields of application/geometries
Watch product video: Scan QR code or go directly to
http://goo.gl/e8wZy
Competition 450
Tiger·tec® 800
Tiger·tec® Silver 950
+ 111%*
+ 77%*
* in comparison to the competition
ORDERING INFORMATION
20 Walter – Turning
Negative ISO indexable inserts – Tiger·tec® Silver
Designationd
mml
mms
mmr
mmf
mmap
mm
P M K S H
HC HC HC HC BL BH
WP
P05
WP
P10
S
WP
P20S
WP
P30
S
WS
M10
WS
M20
WS
M30
WA
K10
WA
K20
WA
K30
WS
M10
WS
M20
WS
M30
WC
B30
WC
B50
r
80˚ l
d
s
CNMG090304-FP5 9,525 9,67 3,18 0,4 0,04 - 0,20 0,1 - 1,5 a b
CNMG090308-FP5 9,525 9,67 3,18 0,8 0,08 - 0,25 0,2 - 2,0 a b
CNMG120404-FP5 12,7 12,9 4,76 0,4 0,04 - 0,20 0,1 - 1,5 a b
CNMG120408-FP5 12,7 12,9 4,76 0,8 0,08 - 0,25 0,2 - 2,0 a b
CNMG120412-FP5 12,7 12,9 4,76 1,2 0,10 - 0,25 0,5 - 2,5 a b
CNMG090304-MP3 9,525 9,67 3,18 0,4 0,06 - 0,20 0,3 - 2,2 a b
CNMG090308-MP3 9,525 9,67 3,18 0,8 0,10 - 0,28 0,6 - 3,0 a b
CNMG120404-MP3 12,7 12,9 4,76 0,4 0,08 - 0,22 0,30 - 2,5 a b c
CNMG120408-MP3 12,7 12,9 4,76 0,8 0,12 - 0,32 0,60 - 3,2 a b c
CNMG120412-MP3 12,7 12,9 4,76 1,2 0,16 - 0,40 0,80 - 3,5 a b c
CNMG120404-MP5 12,7 12,9 4,76 0,4 0,16 - 0,25 0,5 - 4,0 a b c
CNMG120408-MP5 12,7 12,9 4,76 0,8 0,18 - 0,40 0,6 - 5,0 a b c
CNMG120412-MP5 12,7 12,9 4,76 1,2 0,20 - 0,45 1,0 - 5,0 a b c
CNMG120416-MP5 12,7 12,9 4,76 1,6 0,25 - 0,50 1,2 - 5,0 a b c
CNMG160608-MP5 15,875 16,1 6,35 0,8 0,25 - 0,50 0,8 - 7,0 a b c
CNMG160612-MP5 15,875 16,1 6,35 1,2 0,30 - 0,50 1,0 - 7,0 a b c
CNMG160616-MP5 15,875 16,1 6,35 1,6 0,35 - 0,55 1,2 - 7,0 a b c
CNMG120408-RP5 12,7 12,9 4,76 0,8 0,20 - 0,40 0,8 - 6,0 a b c
CNMG120412-RP5 12,7 12,9 4,76 1,2 0,25 - 0,55 1,0 - 6,0 a b c
CNMG120416-RP5 12,7 12,9 4,76 1,6 0,35 - 0,65 1,6 - 6,0 a b c
CNMG160608-RP5 15,875 16,1 6,35 0,8 0,20 - 0,45 1,0 - 8,0 a b c
CNMG160612-RP5 15,875 16,1 6,35 1,2 0,25 - 0,60 1,2 - 8,0 a b c
CNMG160616-RP5 15,875 16,1 6,35 1,6 0,35 - 0,70 1,6 - 8,0 a b c
CNMG190608-RP5 19,05 19,3 6,35 0,8 0,20 - 0,50 1,0 - 10,0 a b c
CNMG190612-RP5 19,05 19,3 6,35 1,2 0,25 - 0,65 1,2 - 10,0 a b c
CNMG190616-RP5 19,05 19,3 6,35 1,6 0,35 - 0,80 1,6 - 10,0 a b c
CNMG190624-RP5 19,05 19,3 6,35 2,4 0,45 - 1,00 2,0 - 10,0 a b c
CNMM120408-NRF 12,7 12,9 4,76 0,8 0,30 - 0,50 0,8 - 7,0 a a b c
CNMM120412-NRF 12,7 12,9 4,76 1,2 0,35 - 0,70 1,2 - 7,0 a a b c
CNMM120416-NRF 12,7 12,9 4,76 1,6 0,40 - 0,80 1,6 - 7,0 a a b c
CNMM160612-NRF 15,875 16,1 6,35 1,2 0,35 - 0,70 1,2 - 9,0 a a b c
CNMM160616-NRF 15,875 16,1 6,35 1,6 0,40 - 0,90 1,6 - 9,0 a a b c
CNMM160624-NRF 15,875 16,1 6,35 2,4 0,45 - 1,00 2,4 - 9,0 a a b c
CNMM190612-NRF 19,05 19,3 6,35 1,2 0,35 - 0,70 1,2 - 10,0 a a b c
CNMM190616-NRF 19,05 19,3 6,35 1,6 0,40 - 0,90 1,6 - 10,0 a a b c
CNMM190624-NRF 19,05 19,3 6,35 2,4 0,45 - 1,10 2,4 - 10,0 a a b c
CNMM250924-NRF 25,4 25,8 9,52 2,4 0,45 - 1,20 2,4 - 12,0 b c
CNMM160612-NRR 15,875 16,1 6,35 1,2 0,50 - 0,90 2,0 - 10,0 a b c c
CNMM160616-NRR 15,875 16,1 6,35 1,6 0,50 - 1,10 2,0 - 10,0 a b c c
CNMM160624-NRR 15,875 16,1 6,35 2,4 0,50 - 1,30 2,0 - 10,0 a b c c
CNMM190612-NRR 19,05 19,3 6,35 1,2 0,50 - 0,90 2,0 - 13,0 a b c c
CNMM190616-NRR 19,05 19,3 6,35 1,6 0,50 - 1,10 2,0 - 13,0 a b c c
CNMM190624-NRR 19,05 19,3 6,35 2,4 0,60 - 1,60 3,0 - 13,0 a b c c
CNMM250924-NRR 25,4 25,8 9,52 2,4 0,60 - 1,60 3,0 - 17,0 a b c c
a b c New addition to range
a b c In the range previously
HC = Coated carbideBL = CBN with low CBN contentBH = CBN with high CBN content
21Walter – Turning
ORDERING INFORMATION
a b c New addition to range
a b c In the range previously
Negative ISO indexable inserts – Tiger·tec® Silver
Designationd
mml
mms
mmr
mmf
mmap
mm
P M K S H
HC HC HC HC BL BH
WP
P05
WP
P10
S
WP
P20S
WP
P30
S
WS
M10
WS
M20
WS
M30
WA
K10
WA
K20
WA
K30
WS
M10
WS
M20
WS
M30
WC
B30
WC
B50
r
55˚ l
d
s
DNMG110402-FP5 9,53 11,6 4,76 0,2 0,04 - 0,12 0,1 - 0,5 a b
DNMG110404-FP5 9,53 11,6 4,76 0,4 0,04 - 0,20 0,1 - 1,5 a b
DNMG110408-FP5 9,53 11,6 4,76 0,8 0,08 - 0,25 0,2 - 2,0 a b
DNMG110412-FP5 9,53 11,6 4,76 1,2 0,10 - 0,25 0,5 - 2,5 a b
DNMG150404-FP5 12,7 15,5 4,76 0,4 0,05 - 0,20 0,1 - 1,5 a b
DNMG150408-FP5 12,7 15,5 4,76 0,8 0,08 - 0,25 0,2 - 2,0 a b
DNMG150412-FP5 12,7 15,5 4,76 1,2 0,10 - 0,25 0,5 - 2,5 a b
DNMG150604-FP5 12,7 15,5 6,35 0,4 0,05 - 0,20 0,1 - 1,5 a b
DNMG150608-FP5 12,7 15,5 6,35 0,8 0,08 - 0,25 0,2 - 2,0 a b
DNMG150612-FP5 12,7 15,5 6,35 1,2 0,10 - 0,25 0,5 - 2,5 a b
DNMG110404-MP3 9,53 11,6 4,76 0,4 0,08 - 0,22 0,30 - 2,2 a b
DNMG110408-MP3 9,53 11,6 4,76 0,8 0,12 - 0,32 0,60 - 3,0 a b
DNMG110412-MP3 9,53 11,6 4,76 1,2 0,16 - 0,35 0,80 - 3,2 a b
DNMG150404-MP3 12,7 15,5 4,76 0,4 0,08 - 0,22 0,30 - 2,5 a b c
DNMG150408-MP3 12,7 15,5 4,76 0,8 0,12 - 0,32 0,60 - 3,2 a b c
DNMG150412-MP3 12,7 15,5 4,76 1,2 0,16 - 0,40 0,80 - 3,5 a b c
DNMG150604-MP3 12,7 15,5 6,35 0,4 0,08 - 0,22 0,30 - 2,5 a b c
DNMG150608-MP3 12,7 15,5 6,35 0,8 0,12 - 0,32 0,60 - 3,2 a b c
DNMG150612-MP3 12,7 15,5 6,35 1,2 0,16 - 0,40 0,80 - 3,5 a b c
DNMG110404-MP5 9,525 11,6 4,76 0,4 0,16 - 0,25 0,5 - 4,0 a b c
DNMG110408-MP5 9,525 11,6 4,76 0,8 0,18 - 0,35 0,6 - 4,0 a b c
DNMG110412-MP5 9,525 11,6 4,76 1,2 0,20 - 0,40 1,0 - 4,0 a b c
DNMG150404-MP5 12,7 15,5 4,76 0,4 0,16 - 0,25 0,5 - 4,0 a b c
DNMG150408-MP5 12,7 15,5 4,76 0,8 0,18 - 0,35 0,6 - 5,0 a b c
DNMG150412-MP5 12,7 15,5 4,76 1,2 0,20 - 0,40 1,0 - 5,0 a b c
DNMG150416-MP5 12,7 15,5 4,76 1,6 0,25 - 0,45 1,2 - 5,0 a b c
DNMG150604-MP5 12,7 15,5 6,35 0,4 0,16 - 0,25 0,5 - 4,0 a b c
DNMG150608-MP5 12,7 15,5 6,35 0,8 0,18 - 0,35 0,6 - 5,0 a b c
DNMG150612-MP5 12,7 15,5 6,35 1,2 0,20 - 0,40 1,0 - 5,0 a b c
DNMG150616-MP5 12,7 15,5 6,35 1,6 0,25 - 0,45 1,2 - 5,0 a b c
DNMG110408-RP5 9,525 11,6 4,76 0,8 0,18 - 0,35 0,8 - 4,0 a b c
DNMG110412-RP5 9,525 11,6 4,76 1,2 0,20 - 0,40 1,0 - 4,0 a b c
DNMG150408-RP5 12,7 15,5 4,76 0,8 0,15 - 0,35 0,8 - 5,0 a b c
DNMG150412-RP5 12,7 15,5 4,76 1,2 0,20 - 0,40 1,0 - 5,0 a b c
DNMG150416-RP5 12,7 15,5 4,76 1,6 0,25 - 0,50 1,6 - 6,0 a b c
DNMG150608-RP5 12,7 15,5 6,35 0,8 0,15 - 0,35 0,8 - 5,0 a b c
DNMG150612-RP5 12,7 15,5 6,35 1,2 0,20 - 0,40 1,0 - 5,0 a b c
DNMG150616-RP5 12,7 15,5 6,35 1,6 0,25 - 0,50 1,6 - 6,0 a b c
DNMG110408-NMT 9,525 11,6 4,76 0,8 0,12 - 0,28 0,6 - 3,2 a b a b b
DNMG150608-NMT 12,7 15,5 6,35 0,8 0,12 - 0,28 0,6 - 4,0 a b a b b
DNMM150608-NRF 12,7 15,5 6,35 0,8 0,25 - 0,45 0,8 - 5,0 a b c
DNMM150612-NRF 12,7 15,5 6,35 1,2 0,30 - 0,50 1,2 - 5,0 a a b c
DNMM150616-NRF 12,7 15,5 6,35 1,6 0,35 - 0,60 1,6 - 5,0 a a b c
HC = Coated carbideBL = CBN with low CBN contentBH = CBN with high CBN content
WS
10
ORDERING INFORMATION
22 Walter – Turning
Negative ISO indexable inserts – Tiger·tec® Silver
Designationd
mml
mms
mmr
mmf
mmap
mm
P M K S H
HC HC HC HC BL BH
WP
P05
WP
P10
S
WP
P20S
WP
P30
S
WS
M10
WS
M20
WS
M30
WA
K10
WA
K20
WA
K30
WS
M10
WS
M20
WS
M30
WC
B30
WC
B50
r
90˚
d
l s
SNMG090308-FP5 9,525 9,525 3,18 0,8 0,06 - 0,20 0,15 - 1,5 a b
SNMG120404-FP5 12,7 12,7 4,76 0,4 0,04 - 0,22 0,1 - 1,8 a b
SNMG120408-FP5 12,7 12,7 4,76 0,8 0,08 - 0,25 0,2 - 2,0 a b
SNMG120412-FP5 12,7 12,7 4,76 1,2 0,10 - 0,25 0,5 - 2,5 a b
SNMG090308-MP3 9,525 9,525 3,18 0,8 0,10 - 0,32 0,6 - 3,0 a b
SNMG120404-MP3 12,7 12,7 4,76 0,4 0,08 - 0,25 0,3 - 2,5 a b
SNMG120408-MP3 12,7 12,7 4,76 0,8 0,12 - 0,35 0,6 - 3,2 a b
SNMG120412-MP3 12,7 12,7 4,76 1,2 0,16 - 0,40 0,8 - 3,5 a b
SNMG120408-MP5 12,7 12,7 4,76 0,8 0,18 - 0,40 0,6 - 5,0 a b c
SNMG120412-MP5 12,7 12,7 4,76 1,2 0,20 - 0,45 1,0 - 5,0 a b c
SNMG120416-MP5 12,7 12,7 4,76 1,6 0,25 - 0,50 1,2 - 5,0 a b c
SNMG150608-MP5 15,875 15,875 6,35 0,8 0,25 - 0,50 0,8 - 8,0 a b c
SNMG150612-MP5 15,875 15,875 6,35 1,2 0,30 - 0,50 1,0 - 8,0 a b c
SNMG150616-MP5 15,875 15,875 6,35 1,6 0,35 - 0,55 1,2 - 8,0 a b c
SNMM120408-NRF 12,7 12,7 4,76 0,8 0,30 - 0,50 0,8 - 7,0 b c
SNMM120412-NRF 12,7 12,7 4,76 1,2 0,35 - 0,70 1,2 - 7,0 a a b c
SNMM120416-NRF 12,7 12,7 4,76 1,6 0,40 - 0,90 1,6 - 7,0 a a b c
SNMM150612-NRF 15,875 15,875 6,35 1,2 0,35 - 0,75 1,2 - 9,0 a a b c
SNMM150616-NRF 15,875 15,875 6,35 1,6 0,40 - 0,90 1,6 - 9,0 a a b c
SNMM150624-NRF 15,875 15,875 6,35 2,4 0,45 - 1,10 2,0 - 9,0 a a b c
SNMM190612-NRF 19,05 19,05 6,35 1,2 0,35 - 0,75 1,2 - 10,0 a a b c
SNMM190616-NRF 19,05 19,05 6,35 1,6 0,40 - 1,00 1,6 - 10,0 a a b c
SNMM190624-NRF 19,05 19,05 6,35 2,4 0,45 - 1,20 2,0 - 10,0 a a b c
SNMM250716-NRF 25,4 25,4 7,94 1,6 0,45 - 1,00 1,6 - 12,0 b c
SNMM250724-NRF 25,4 25,4 7,94 2,4 0,55 - 1,20 2,5 - 12,0 b c
SNMM250916-NRF 25,4 25,4 9,52 1,6 0,45 - 1,00 1,6 - 12,0 a b c
SNMM250924-NRF 25,4 25,4 9,52 2,4 0,55 - 1,20 2,5 - 12,0 b c
SNMM150612-NRR 15,875 15,875 6,35 1,2 0,50 - 0,80 1,5 - 10,0 b c c
SNMM150616-NRR 15,875 15,875 6,35 1,6 0,45 - 1,00 2,0 - 12,0 a b c c
SNMM150624-NRR 15,875 15,875 6,35 2,4 0,50 - 1,40 2,5 - 12,0 b c c
SNMM190612-NRR 19,05 19,05 6,35 1,2 0,50 - 1,00 2,0 - 13,0 a b c c
SNMM190616-NRR 19,05 19,05 6,35 1,6 0,50 - 1,10 2,5 - 13,0 a b c c
SNMM190624-NRR 19,05 19,05 6,35 2,4 0,60 - 1,60 3,0 - 13,0 a b c c
SNMM250716-NRR 25,4 25,4 7,94 1,6 0,50 - 1,10 2,5 - 17,0 a b c c
SNMM250724-NRR 25,4 25,4 7,94 2,4 0,60 - 1,60 3,0 - 17,0 a b c c
SNMM250732-NRR 25,4 25,4 7,94 3,2 0,60 - 1,80 4,0 - 17,0 b c c
SNMM250916-NRR 25,4 25,4 9,52 1,6 0,50 - 1,10 2,5 - 17,0 a b c c
SNMM250924-NRR 25,4 25,4 9,52 2,4 0,60 - 1,60 3,0 - 17,0 a b c c
SNMM250932-NRR 25,4 25,4 9,52 3,2 0,60 - 1,80 4,0 - 17,0 b c c
SNMG120408-RP5 12,7 12,7 4,76 0,8 0,20 - 0,50 0,8 - 6,0 a b c
SNMG120412-RP5 12,7 12,7 4,76 1,2 0,25 - 0,65 1,0 - 6,0 a b c
SNMG120416-RP5 12,7 12,7 4,76 1,6 0,35 - 0,75 1,6 - 6,0 a b c
SNMG150612-RP5 15,875 15,875 6,35 1,2 0,25 - 0,70 1,2 - 8,0 a b c
SNMG150616-RP5 15,875 15,875 6,35 1,6 0,35 - 0,80 1,6 - 8,0 a b c
SNMG190612-RP5 19,05 19,05 6,35 1,2 0,30 - 0,70 1,2 - 10,0 a b c
SNMG190616-RP5 19,05 19,05 6,35 1,6 0,35 - 0,90 1,6 - 10,0 a b c
SNMG190624-RP5 19,05 19,05 6,35 2,4 0,45 - 1,20 2,0 - 10,0 a b c
a b c New addition to range
a b c In the range previously
HC = Coated carbideBL = CBN with low CBN contentBH = CBN with high CBN content
23Walter – Turning
ORDERING INFORMATION
Negative ISO indexable inserts – Tiger·tec® Silver
Designationd
mml
mms
mmr
mmf
mmap
mm
P M K S H
HC HC HC HC BL BH
WP
P05
WP
P10
S
WP
P20S
WP
P30
S
WS
M10
WS
M20
WS
M30
WA
K10
WA
K20
WA
K30
WS
M10
WS
M20
WS
M30
WC
B30
WC
B50
r60˚
s
d
l
TNMG110304-FP5 6,35 11 3,18 0,4 0,04 - 0,15 0,08 - 1,2 a b
TNMG110308-FP5 6,35 11 3,18 0,8 0,08 - 0,20 0,15 - 1,5 a b
TNMG160404-FP5 9,53 16,5 4,76 0,4 0,04 - 0,20 0,1 - 1,5 a b
TNMG160408-FP5 9,53 16,5 4,76 0,4 0,08 - 0,25 0,2 - 2,0 a b
TNMG160412-FP5 9,53 16,5 4,76 1,2 0,10 - 0,25 0,5 - 2,5 a b
TNMG110304-MP3 6,35 11 3,18 0,4 0,06 - 0,18 0,3 - 2,0 a b c
TNMG110308-MP3 6,35 11 3,18 0,8 0,10 - 0,25 0,6 - 2,2 a b c
TNMG160404-MP3 9,53 16,5 4,76 0,4 0,08 - 0,22 0,30 - 2,2 a b c
TNMG160408-MP3 9,53 16,5 4,76 0,8 0,12 - 0,32 0,60 - 3,0 a b c
TNMG160412-MP3 9,53 16,5 4,76 1,2 0,16 - 0,40 0,80 - 3,2 a b c
TNMG220408-MP3 12,7 22 4,76 0,8 0,12 - 0,32 0,6 - 3,2 a b c
TNMG220412-MP3 12,7 22 4,76 1,2 0,16 - 0,40 0,8 - 3,5 a b c
TNMG160404-MP5 9,525 16,5 4,76 0,4 0,16 - 0,25 0,5 - 4,0 a b c
TNMG160408-MP5 9,525 16,5 4,76 0,8 0,18 - 0,35 0,6 - 4,0 a b c
TNMG160412-MP5 9,525 16,5 4,76 1,2 0,20 - 0,40 1,0 - 4,0 a b c
TNMG220408-MP5 12,7 22 4,76 0,8 0,18 - 0,35 0,8 - 5,0 a b c
TNMG220412-MP5 12,7 22 4,76 1,2 0,20 - 0,40 1,0 - 5,0 a b c
TNMG270612-NR4 15,875 27 6,35 1,2 0,35-0,65 1,2-8,0 a b c b c b c
TNMM160408-NRF 9,525 16,5 4,76 0,8 0,30 - 0,45 0,8 - 6,0 a b c
TNMM160412-NRF 9,525 16,5 4,76 1,2 0,35 - 0,50 1,2 - 6,0 a b c
TNMM220408-NRF 12,7 22 4,76 0,8 0,30 - 0,50 0,8 - 7,0 a b c
TNMM220412-NRF 12,7 22 4,76 1,2 0,35 - 0,60 1,2 - 7,0 a a b c
TNMM220416-NRF 12,7 22 4,76 1,6 0,40 - 0,80 1,6 - 7,0 a a b c
TNMM270612-NRF 15,875 27 6,35 1,2 0,35 - 0,65 1,2 - 8,0 b c
TNMM270616-NRF 15,875 27 6,35 1,6 0,40 - 0,85 1,6 - 8,0 b c
TNMM270616-NRR 15,875 27 6,35 1,6 0,50 - 1,10 2,0 - 13,0 b c c
TNMM270624-NRR 15,875 27 6,35 2,4 0,60 - 1,60 3,0 - 13,0 b c c
TNMG160408-RP5 9,525 16,5 4,76 0,8 0,20 - 0,40 0,8 - 5,0 a b c
TNMG160412-RP5 9,525 16,5 4,76 1,2 0,25 - 0,55 1,0 - 5,0 a b c
TNMG220408-RP5 12,7 22 4,76 0,8 0,20 - 0,45 0,8 - 7,0 a b c
TNMG220412-RP5 12,7 22 4,76 1,2 0,25 - 0,60 1,0 - 7,0 a b c
TNMG220416-RP5 12,7 22 4,76 1,6 0,35 - 0,70 1,6 - 7,0 a b cr
35˚
d
l s
VNMG160404-FP5 9,53 16,5 4,76 0,4 0,04 - 0,22 0,1 - 1,5 a b
VNMG160408-FP5 9,53 16,5 4,76 0,8 0,08 - 0,25 0,2 - 2,0 a b
VNMG160404-MP3 9,525 16,5 4,76 0,4 0,08 - 0,22 0,3 - 2,2 a b c
VNMG160408-MP3 9,525 16,5 4,76 0,8 0,12 - 0,32 0,6 - 3,0 a b c
VNMG160412-MP3 9,525 16,5 4,76 1,2 0,16 - 0,35 0,8 - 3,2 a b c
a b c New addition to range
a b c In the range previously
HC = Coated carbideBL = CBN with low CBN contentBH = CBN with high CBN content
ORDERING INFORMATION
24 Walter – Turning
Negative ISO indexable inserts – Tiger·tec® Silver
Designationd
mml
mms
mmr
mmf
mmap
mm
P M K S H
HC HC HC HC BL BH
WP
P05
WP
P10
S
WP
P20S
WP
P30
S
WS
M10
WS
M20
WS
M30
WA
K10
WA
K20
WA
K30
WS
M10
WS
M20
WS
M30
WC
B30
WC
B50
r
80˚ s
d
l
WNMG060404-FP5 9,53 6,5 4,76 0,4 0,04 - 0,20 0,1 - 1,5 a b
WNMG060408-FP5 9,53 6,5 4,76 0,8 0,08 - 0,25 0,2 - 2,0 a b
WNMG080404-FP5 12,7 8,72 4,76 0,4 0,05 - 0,20 0,1 - 1,5 a b
WNMG080408-FP5 12,7 8,72 4,76 0,8 0,08 - 0,25 0,2 - 2,0 a b
WNMG080412-FP5 12,7 8,72 4,76 1,2 0,10 - 0,25 0,5 - 2,5 a b
WNMG060404-MP3 9,525 6,5 4,76 0,4 0,08 - 0,22 0,3 - 2,2 a b c
WNMG060408-MP3 9,525 6,5 4,76 0,8 0,12 - 0,32 0,6 - 3,0 a b c
WNMG060412-MP3 9,525 6,5 4,76 1,2 0,16 - 0,35 0,8 - 3,2 a b c
WNMG080404-MP3 12,7 8,72 4,76 0,4 0,08 - 0,22 0,30 - 2,5 a b c
WNMG080408-MP3 12,7 8,72 4,76 0,8 0,12 - 0,32 0,60 - 3,2 a b c
WNMG080412-MP3 12,7 8,72 4,76 1,2 0,16 - 0,40 0,80 - 3,5 a b c
WNMG060404-MP5 9,525 6,5 4,76 0,4 0,16 - 0,25 0,5 - 4,0 a b c
WNMG060408-MP5 9,525 6,5 4,76 0,8 0,18 - 0,35 0,6 - 4,0 a b c
WNMG060412-MP5 9,525 6,5 4,76 1,2 0,20 - 0,40 1,0 - 4,0 a b c
WNMG080404-MP5 12,7 8,69 4,76 0,4 0,16 - 0,25 0,5 - 4,0 a b c
WNMG080408-MP5 12,7 8,69 4,76 0,8 0,18 - 0,40 0,6 - 5,0 a b c
WNMG080412-MP5 12,7 8,69 4,76 1,2 0,20 - 0,45 1,0 - 5,0 a b c
WNMG080416-MP5 12,7 8,69 4,76 1,6 0,25 - 0,50 1,2 - 5,0 a b c
WNMG100608-MP5 15,875 10,8 6,35 0,8 0,25 - 0,40 0,8 - 7,0 a b c
WNMG100612-MP5 15,875 10,8 6,35 1,2 0,30 - 0,50 1,0 - 7,0 a b c
WNMG100616-MP5 15,875 10,8 6,35 1,6 0,35 - 0,55 1,2 - 7,0 a b c
WNMG060408-RP5 9,525 6,5 4,76 0,8 0,20 - 0,40 0,8 - 4,0 a b c
WNMG060412-RP5 9,525 6,5 4,76 1,2 0,25 - 0,50 1,0 - 4,0 a b c
WNMG080408-RP5 12,7 8,69 4,76 0,8 0,20 - 0,40 0,8 - 6,0 a b c
WNMG080412-RP5 12,7 8,69 4,76 1,2 0,25 - 0,55 1,0 - 6,0 a b c
WNMG080416-RP5 12,7 8,69 4,76 1,6 0,35 - 0,65 1,6 - 6,0 a b c
WNMG100612-RP5 15,875 10,8 6,35 1,2 0,25 - 0,60 1,2 - 8,0 a b c
WNMG100616-RP5 15,875 10,8 6,35 1,6 0,35 - 0,70 1,6 - 8,0 a b c
WNMG080408-NRS 12,7 8,69 4,76 0,8 0,16-0,35 1,0-4,0 a b a b
WNMG080412-NRS 12,7 8,69 4,76 1,2 0,18-0,4 1,2-4,0 a b a b
WNMM080412-NRF 12,7 8,72 4,76 1,2 0,35 - 0,70 1,2 - 6,0 a b c
WNMM100612-NRF 15,875 10,8 6,35 1,2 0,35 - 0,70 1,2 - 8,0 a a b c
WNMM100616-NRF 15,875 10,8 6,35 1,6 0,40 - 0,90 1,6 - 8,0 a a b c
Positive ISO indexable inserts
Designationd
mml
mms
mmr
mmf
mmap
mm
P M K N S H
HC HC HC HC HC BL BH
WP
P01
WP
P10
WP
P20
WP
P30
WS
M10
WS
M20
WS
M30
WA
K10
WA
K20
WA
K30
WK
1HW
WX
N10
HC
WS
M10
WS
M20
WS
M30
WC
B30
WC
B50
r
7˚80˚
d
sl
CCGT120404-PF2 12,7 12,9 4,76 0,4 0,08-0,25 0,2-2,5 b a a b
CCGT120408-PF2 12,7 12,9 4,76 0,8 0,1-0,3 0,3-3,5 b a a b
r
90˚
7˚sl
d
SCGT120408-PF2 12,7 12,7 4,76 0,8 0,10-0,30 0,3-3,0 b a a b
SCMT120408-PS5 12,7 12,7 4,76 0,8 0,12-0,32 0,5-2,5 b b c a b b c
a b c New addition to range
a b c In the range previously
HC = Coated carbide
r
90˚
7˚sl
d
25Walter – Turning
ORDERING INFORMATION
a b c New addition to range
a b c In the range previously
HC = Coated carbideCN = Silicon nitride Si3N4CR = Ceramic reinforced
Negative ISO inserts – ceramic
Designationd
mml
mms
mmr
mmf
mmap
mm
P M K S H
HC HC HC CN CR HC
WP
P05
WP
P10
S
WP
P20S
WP
P30
S
WS
M10
WA
K10
WA
K20
WIS
10
WW
S20
WC
B30
WC
B50
r
80˚ l
d
s
CNGN120708T01020 12,7 12,9 7,94 0,8 0,10 - 0,22 0,10 - 3,60 a b
CNGN120712T01020 12,7 12,9 7,94 1,2 0,10 - 0,32 0,10 - 3,60 a b
CNGN120716T01020 12,7 12,9 7,94 1,6 0,10 - 0,42 0,10 - 3,60 a b
r
55˚ l
d
s
DNGN150708T01020 12,7 15,5 7,94 0,8 0,10 - 0,42 0,10 - 4,50 b
DNGN150712T01020 12,7 15,5 7,94 1,2 0,10 - 0,32 0,10 - 4,50 b
s
d
RNGN120700E 12,7 7,94 6,35 0,20 - 0,32 0,90 - 3,60 a b
RNGN120700T01020 12,7 7,94 6,35 0,20 - 3,60 0,10 - 3,60 a b
RNGN150700T01020 15,875 7,94 7,94 0,20 - 4,10 0,10 - 4,50 b
RNGN190700T01020 19,05 7,94 9,525 0,20 - 5,80 0,10 - 5,70 b
RNGN250700E 25,4 7,94 12,7 0,10 - 0,42 1,20 - 7,50 b
r
90˚
d
l s
SNGN120708T01020 12,7 12,7 7,94 0,8 0,10 - 0,22 0,10 - 3,60 b
SNGN120712E 12,7 12,7 7,94 1,2 0,10 - 0,22 0,10 - 4,00 a
SNGN120712T01020 12,7 12,7 7,94 1,2 0,10 - 0,32 0,10 - 3,60 a b
SNGN120716T01020 12,7 12,7 7,94 1,6 0,10 - 0,42 0,10 - 3,60 b
Positive ISO inserts – ceramic
Designationd
mms
mmr
mmf
mmap
mm
P M K S H
HC HC HC CN CR HC
WP
P05
WP
P10
S
WP
P20S
WP
P30
S
WS
M10
WA
K10
WA
K20
WIS
10
WW
S20
WC
B30
WC
B50
RCGX060600T01020 6,35 6,35 3,17 0,20 - 1,70 0,10 - 1,80 a b
RCGX090700E 9,525 7,94 4,76 0,10 - 0,22 0,60 - 2,40 a
RCGX090700T01020 9,525 7,94 4,76 0,20 - 2,50 0,10 - 2,70 a b
RCGX120700E 12,7 7,94 6,35 0,20 - 0,32 0,90 - 3,60 a b
RCGX120700T01020 12,7 7,94 6,35 0,20 - 3,60 0,10 - 3,60 a b
RPGX090700E 9,525 7,94 4,76 0,10 - 0,22 0,60 - 2,40 a
RPGX090700T01020 9,525 7,94 4,76 0,20 - 2,15 0,10 - 2,70 a
RPGX120700E 12,7 7,94 6,35 0,15 - 0,32 0,90 - 3,60 a
RPGX120700T01020 12,7 7,94 6,35 0,20 - 3,60 0,10 - 3,60 a b
NEW2012
NEW2012
7˚
s
d
11˚
s
d
ORDERING INFORMATION
26 Walter – Turning
a b c New addition to range
a b c In the range previously
Walter Cut GX indexable inserts
P M S
HC HC HC
Designations
mmr
mm κl
mmf
mm WS
M13
S
WS
M23
S
WS
M33
S
WS
M43
S
WS
M13
S
WS
M23
S
WS
M33
S
WS
M43
S
WS
M13
S
WS
M23
S
WS
M33
S
WS
M43
S
GX16-1E200N02-CE4 2 0,2 16,6 0,04 - 0,12 b c a c b cGX16-1E200R/L6-CE4 2 0,2 6° 16,6 0,04 - 0,10 b c a c b cGX16-1E250N02-CE4 2,5 0,2 16,6 0,05 - 0,15 b c a c b cGX16-1E250R/L6-CE4 2,5 0,2 6° 16,6 0,05 - 0,12 b c a c b cGX16-2E300N02-CE4 3 0,2 16,6 0,09 - 0,30 b c a c b cGX16-2E300R/L6-CE4 3 0,2 6° 16,6 0,09 - 0,24 b c a c b cGX24-2E300N02-CE4 3 0,2 24 0,09 - 0,30 b c a c b cGX24-2E300R/L6-CE4 3 0,2 6° 24,6 0,09 - 0,24 b c a c b cGX24-3E400N03-CE4 4 0,3 24 0,10 - 0,32 b c a c b cGX24-3E400R/L6-CE4 4 0,2 6° 24,6 0,10 - 0,26 b c a c b cGX24-3E500N03-CE4 5 0,3 24 0,12 - 0,35 b c a c b cGX24-4E600N03-CE4 6 0,3 24 0,12 - 0,40 b c a c b c
GX16-1F200N02-CE4 2 0,2 16 0,04 - 0,12 b c a c b cGX16-1F250N02-CE4 2,5 0,2 16 0,05 - 0,15 b c a c b cGX24-2F300N02-CE4 3 0,2 23,7 0,09 - 0,30 b c a c b cGX24-3F400N03-CE4 4 0,3 23,7 0,10 - 0,32 b c a c b c
GX16-1E200N02-CF5 2 0,2 16,6 0,06 - 0,15 b c a c b cGX16-1E200R/L6-CF5 2 0,2 6° 16,6 0,03 - 0,10 b c a c b cGX16-1E250N02-CF5 2,5 0,2 16,6 0,07 - 0,18 b c a c b cGX16-1E250R/L6-CF5 2,5 0,2 6° 16,6 0,03 - 0,12 b c a c b cGX16-2E300N02-CF5 3 0,2 16,6 0,08 - 0,20 b c a c b cGX16-2E300R/L6-CF5 3 0,2 6° 16,6 0,04 - 0,16 b c a c b cGX24-2E300N02-CF5 3 0,2 24 0,08 - 0,20 b c a c b cGX24-2E300R/L6-CF5 3 0,2 6° 24,6 0,04 - 0,16 b c a c b cGX24-3E400N02-CF5 4 0,2 24 0,10 - 0,22 b c a c b cGX24-3E400R/L6-CF5 4 0,2 6° 24,6 0,10 - 0,18 b c a c b cGX24-3E500N03-CF5 5 0,3 24 0,10 - 0,25 b c a c b c
GX16-1F200N02-CF5 2 0,2 16 0,03 - 0,12 b c a c b cGX16-1F250N02-CF5 2,5 0,2 16 0,03 - 0,15 b c a c b cGX24-2F300N02-CF5 3 0,2 23,7 0,04 - 0,20 b c a c b cGX24-3F400N02-CF5 4 0,2 23,7 0,10 - 0,22 b c a c b cGX24-3F500N03-CF5 5 0,3 23,7 0,10 - 0,25 b c a c b c
GX16-0E150N015-CF6 1,5 0,15 16,6 0,03 - 0,10 b c a c b cGX16-0E150R/L10-CF6 1,5 0,1 10° 16,0 0,03 - 0,08 b c a c b cGX16-1E200N02-CF6 2 0,2 16,6 0,03 - 0,12 b c a c b cGX16-1E200R/L6-CF6 2 0,2 6° 16,6 0,03 - 0,10 b c a c b cGX16-1E250N02-CF6 2,5 0,2 16,6 0,03 - 0,15 b c a c b cGX16-1E250R/L6-CF6 2,5 0,2 6° 16,6 0,03 - 0,12 b c a c b cGX16-2E300N02-CF6 3 0,2 16,6 0,04 - 0,20 b c a c b cGX16-2E300R/L6-CF6 3 0,2 6° 16,6 0,04 - 0,16 b c a c b cGX24-2E300N02-CF6 3 0,2 24,6 0,04 - 0,20 b c a c b cGX24-2E300R/L6-CF6 3 0,2 6° 24,6 0,04 - 0,16 b c a c b c
GX16-1F200N02-CF6 2 0,2 16 0,03 - 0,12 b c a c b cGX16-1F250N02-CF6 2,5 0,2 16 0,03 - 0,15 b c a c b cGX24-2F300N02-CF6 3 0,2 24,2 0,04 - 0,20 b c a c b c
GX...N GX...R GX...L
lTol.
χr
r
S
χ
r
r
S
r
r
S
GX...N GX...R GX...L
lTol.
χr
r
S
χ
r
r
S
r
r
S
GX...N GX...R GX...L
lTol.
χr
r
S
χ
r
r
S
r
r
S
27Walter – Turning
ORDERING INFORMATION
a b c New addition to range
a b c In the range previously
Walter Cut GX indexable inserts
P M S
HC HC HC
Designations
mmr
mml
mmf
mmap
mm WS
M13
S
WS
M23
S
WS
M33
S
WS
M43
S
WS
M13
S
WS
M23
S
WS
M33
S
WS
M43
S
WS
M13
S
WS
M23
S
WS
M33
S
WS
M43
S
GX09-1E200N02-GD3 2 0,2 9 0,04 - 0,12 b c a c b cGX09-1E250N02-GD3 2,5 0,2 9 0,04 - 0,14 b c a c b cGX09-2E300N03-GD3 3 0,3 9 0,06 - 0,18 b c a c b cGX09-2E350N03-GD3 3,5 0,3 9 0,06 - 0,18 b c a c b cGX16-1E200N02-GD3 2 0,2 16 0,04 - 0,12 b c a c b cGX16-1E250N02-GD3 2,5 0,2 16 0,04 - 0,14 b c a c b cGX16-2E300N03-GD3 3 0,3 16 0,06 - 0,18 b c a c b cGX16-3E400N04-GD3 4 0,4 16 0,10 - 0,20 b c a c b cGX16-3E500N04-GD3 5 0,4 16 0,12 - 0,25 b c a c b cGX16-4E600N05-GD3 6 0,5 16 0,14 - 0,28 b c a c b cGX24-2E300N03-GD3 3 0,3 24 0,06 - 0,18 b c a c b cGX24-3E400N04-GD3 4 0,4 24 0,10 - 0,20 b c a c b cGX24-3E500N04-GD3 5 0,4 24 0,12 - 0,25 b c a c b cGX24-4E600N05-GD3 6 0,5 24 0,14 - 0,28 b c a c b c
GX16-1E200N02-GD6 2 0,2 16 0,04 - 0,12 a b a c a bGX16-1E250N02-GD6 2,5 0,2 16 0,06 - 0,17 a b a c a bGX16-2E300N03-GD6 3 0,3 16 0,08 - 0,18 a b a c a bGX16-3E400N04-GD6 4 0,4 16 0,10 - 0,22 a b a c a bGX16-3E500N04-GD6 5 0,4 16 0,12 - 0,24 a b a c a bGX16-4E600N05-GD6 6 0,5 16 0,14 - 0,30 a b a c a bGX24-2E300N03-GD6 3 0,3 24 0,08 - 0,18 a b a c a bGX24-3E400N04-GD6 4 0,4 24 0,10 - 0,22 a b a c a bGX24-3E500N04-GD6 5 0,4 24 0,12 - 0,24 a b a c a bGX24-4E600N05-GD6 6 0,5 24 0,14 - 0,30 a b a c a b
GX09-1E200N02-UF4 2 0,2 9 0,1-0,15 0,3-1 b c a c b cGX09-2E300N03-UF4 3 0,3 9 0,1-0,2 0,4-1,5 b c a c b cGX16-1E200N02-UF4 2 0,2 16 0,1-0,15 0,3-1,2 b c a c b cGX16-1E250N02-UF4 2,5 0,2 16 0,1-0,18 0,3-1,3 b c a c b cGX16-2E300N03-UF4 3 0,3 16 0,1-0,2 0,4-2 b c a c b cGX16-3E400N04-UF4 4 0,4 16 0,1-0,3 0,5-2,8 b c a c b cGX16-3E500N04-UF4 5 0,5 16 0,12-0,35 0,5-3 b c a c b cGX16-4E600N05-UF4 6 0,5 16 0,14-0,4 0,6-3,5 b c a c b cGX24-2E300N03-UF4 3 0,3 24 0,1-0,2 0,4-2 b c a c b cGX24-2E318N03-UF4 3,18 0,3 24 0,1-0,22 0,4-2 b c a c b cGX24-3E400N04-UF4 4 0,4 24 0,1-0,3 0,5-2,8 b c a c b cGX24-3E400N08-UF4 4 0,8 24 0,1-0,3 0,9-2,8 b a bGX24-3E475N04-UF4 4,75 0,4 24 0,12-0,33 0,5-3 b c a c b cGX24-3E500N04-UF4 5 0,5 24 0,12-0,35 0,5-3 b c a c b cGX24-3E500N08-UF4 5 0,8 24 0,12-0,35 0,9-3 b a bGX24-4E600N05-UF4 6 0,5 24 0,14-0,4 0,6-3,5 b c a c b cGX24-4E600N08-UF4 6 0,8 24 0,14-0,4 0,9-3,5 b a bGX24-4E635N05-UF4 6,35 0,5 24 0,14-0,42 0,6-3,5 b c a c b c
GX...N GX...R GX...L
lTol.
χr
r
S
χ
r
r
S
r
r
S
GX...N GX...R GX...L
lTol.
χr
r
S
χ
r
r
S
r
r
S
GX...N GX...R GX...L
lTol.
χr
r
S
χ
r
r
S
r
r
S
HC = Coated carbide
ORDERING INFORMATION
28 Walter – Turning
GX24 full radius cutting inserts
Designations
mmr
mml
mmf
mmap
mm
P M K S
HC HC HC HCW
PP2
3
WS
M13
S
WS
M23
S
WS
M33
S
WS
M43
S
WS
M13
S
WS
M23
S
WS
M33
S
WS
M43
S
WP
P23
WS
M13
S
WS
M23
S
WS
M33
S
WS
M43
S
GX...N
r
S
lTol.
GX16-1E200N10-RD4 2 1 16 0,08-0,25 0,2-1 a b b b bGX16-1E239N12-RD4 2,39 1,19 16 0,08-0,25 0,2-1,2 a b b b bGX24-2E300N15-RD4 3 1,5 24 0,1-0,35 0,5-1,5 a b b b bGX24-2E318N16-RD4 3,18 1,59 24 0,1-0,35 0,5-1,6 a b b b bGX24-3E400N20-RD4 4 2 24 0,15-0,5 0,5-2 a b b b bGX24-3E475N24-RD4 4,75 2,38 24 0,15-0,55 0,5-2,4 a b b b bGX24-3E500N25-RD4 5 2,5 24 0,17-0,6 0,5-2,5 a b b b bGX24-4E600N30-RD4 6 3 24 0,17-0,7 0,5-3 a b b b bGX24-4E635N32-RD4 6,35 3,18 24 0,17-0,7 0,5-3,2 a b b b b
GX24-2E300N15-RF8 3 1,5 24 0,1 - 0,3 0,1 - 1,5 aa aa aaGX24-3E400N20-RF8 4 2 24 0,12 - 0,45 0,1 - 2 aa aa a aGX24-3E500N25-RF8 5 2,5 24 0,15 - 0,5 0,1 - 2,5 aa aa aaGX24-4E600N30-RF8 6 3 24 0,15 - 0,55 0,1 - 3 aa aa aa
Walter Cut GX indexable inserts
P M S
HC HC HC
Designations
mmr
mml
mmf
mmap
mm WS
M13
S
WS
M23
S
WS
M33
S
WS
M43
S
WS
M13
S
WS
M23
S
WS
M33
S
WS
M43
S
WS
M13
S
WS
M23
S
WS
M33
S
WS
M43
S
GX...N GX...R GX...L
lTol.
χr
r
S
χ
r
r
S
r
r
S
GX16-1E200N02-UD6 2 0,2 16 0,06 - 0,15 0,3 - 1,2 a b a b a bGX16-1E250N02-UD6 2,5 0,2 16 0,08 - 0,14 0,3 - 1,3 a b a b a bGX16-2E300N03-UD6 3 0,3 16 0,10 - 0,20 0,4 - 2,0 a b a b a bGX16-3E400N04-UD6 4 0,4 16 0,12 - 0,25 0,5 - 2,8 a b a b a bGX16-3E500N04-UD6 5 0,4 16 0,12 - 0,30 0,5 - 3,0 a b a b a bGX16-4E600N05-UD6 6 0,5 16 0,14 - 0,35 0,6 - 3,5 a b a b a bGX24-2E300N03-UD6 3 0,3 24 0,10 - 0,20 0,4 - 2,0 a b a b a bGX24-3E400N04-UD6 4 0,4 24 0,12 - 0,25 0,5 - 2,8 a b a b a bGX24-3E500N04-UD6 5 0,4 24 0,12 - 0,30 0,5 - 3,0 a b a b a bGX24-4E600N05-UD6 6 0,5 24 0,14 - 0,35 0,6 - 3,5 a b a b a b
29Walter – Turning
ORDERING INFORMATION
Designationh = h1mm
bmm
f mm
f1mm
l1mm
l4mm
l20mm s Designation
f1f
45˚
b
l1
h
h1
l4
l20
DSSNR/L1616H09 09 16 16 20 13,9 100 21,3 106,1 -8 0 45° SN..0903..
Designationh = h1mm
bmm
f mm
l1mm
l4mm s Designation
45˚ 45˚
b
l1
f
h
h1
l4
DSDNN1616H09 09 16 16 8,3 100 28,1 -6 -6 45° SN..0903..
Designationh = h1mm
bmm
f mm
l1mm
l4mm s Designation
b
l1
f
h
h1
l495˚
DWLNR/L1616H06 06 16 16 20 100 26,4 -6 -6 95° WN..0604..
ISO turning toolholders for external machining
Designationh = h1mm
bmm
f mm
l1mm
l4mm s Designation
95˚l4
b
l1
f
h
h1
DCLNR/L1616H09 09 16 16 20 100 24,8 -6 -6 95°
CN..0903..DCLNR/L2020K09 09 20 20 25 125 24,8 -6 -6 95°
DCLNR/L2525M09 09 25 25 32 150 24,8 -6 -6 95°
ORDERING INFORMATION
30 Walter – Turning
Designationh = h1mm
bmm
f mm
l1mm
l4mm s Designation
45˚ 45˚
l4
l1
b
h
h1 f
PSDNN1212F09 09 12 12 6,3 80 20 -6 -6 45°SN..0903..
PSDNN1616H09 09 16 16 8,3 100 21 -6 -6 45°
Designationh = h1mm
bmm
f mm
f1mm
l1mm
l4mm
l20mm s Designation
f1
l445˚
l1l20
b
h
fh1
PSSNR/L1616H09 09 16 16 20 13,9 100 22 106,1 -8 0 45° SN..0903..
Designationh = h1mm
bmm
f mm
l1mm
l4mm s Designation
f
95˚ l4
l1
b
h
h1
PCLNR/L1616H09 09 16 16 20 100 24,2 -6 -6 95°
CN..0903..PCLNR/L2020K09 09 20 20 25 125 24,2 -6 -6 95°
PCLNR/L2525M09 09 25 25 32 150 24,2 -6 -6 95°
Designationh = h1mm
bmm
f mm
l1mm
l4mm s Designation
91˚
l1
b
f
l4
h
h1
PTGNR/L1212F11 11 12 12 16 80 15,6 -6 -6 91°TN..1103..
PTGNR/L1616H11 11 16 16 20 100 15,6 -6 -6 91°
31Walter – Turning
ORDERING INFORMATION
Designationh = h1mm
bmm
f mm
l1mm
l4mm s Designation
91˚f
l4
l1
b
h
h1
PTFNR/L1212F11 11 12 12 16 80 15 -6 -6 91° TN..1103..
PTFNR/L1616H16 16 16 16 20 100 19,7 -6 -6 91° TN..1604..
ISO turning toolholders for internal machining
DesignationDminmm
d1mm
f mm
h mm
l1mm s Designation
95˚
l1
f
λs
Dmin
d1
h
A16R-PCLNR/L09 09 20 16 11 15 200 -13 -6 95°
CN..0903..A20S-PCLNR/L09 09 25 20 13 18 250 -11 -6 95°
A25T-PCLNR/L09 09 32 25 17 23 300 -11 -6 95°
A25T-PCLNR/L12 12 32 25 17 23 300 -10 -6 95°
CN..1204..A32T-PCLNR/L12 12 40 32 22 30 300 -11 -6 95°
A40T-PCLNR/L12 12 50 40 27 37 300 -10 -6 95°
A32T-PCLNR/L16 16 55 32 22 30 300 -10 -6 95°CN..1606..
A40T-PCLNR/L16 16 58 40 27 37 300 -10 -6 95°
DesignationDminmm
d1mm
f mm
h mm
l1mm s Designation
93˚
l4l1
f
d1
h
λs
Dmin
A25T-PDUNR/L11 11 32 25 17 23 300 -11 -6 93°
DN..1104..A32T-PDUNR/L11 11 40 32 22 30 300 -10 -6 93°
A40T-PDUNR/L11 11 50 40 27 37 300 -11 -6 93°
A32T-PDUNR/L15 15 40 32 27 30 300 -12 -6 93°DN..1506..
A40T-PDUNR/L15 15 50 40 27 37 300 -11 -6 93°
DesignationDminmm
d1mm
f mm
h mm
l1mm s Designation
75˚f
λs
l1h
d1
Dmin
A25T-PSKNR/L12 12 32 25 17 23 300 -11 -6 75°
SN..1204..A32T-PSKNR/L12 12 40 32 22 30 300 -10 -6 75°
A40T-PSKNR/L12 12 50 40 27 37 300 -10 -6 75°
ORDERING INFORMATION
32 Walter – Turning
DesignationDminmm
d1mm
f mm
h mm
l1mm s Designation
d1
91˚
l1
fh
λs
Dmin
A16R-PTFNR/L11 11 20 16 11 15 200 -14 -6 91°
TN..1103..A20S-PTFNR/L11 11 25 20 13 18 250 -12 -6 91°
A25T-PTFNR/L11 11 32 25 17 23 300 -10 -6 91°
A25T-PTFNR/L16 16 32 25 17 23 300 -13 -6 91°TN..1604..
A32T-PTFNR/L16 16 50 32 22 30 300 -12 -6 91°
A40T-PTFNR/L22 22 50 40 27 37 300 -11 -6 91° TN..2204..
DesignationDminmm
d1mm
f mm
h mm
l1mm s Designation
95˚
l1
f
d1
h
λs
Dmin
A20S-PWLNR/L06 06 25 20 13 18 250 -15 -6 95°
WN..0604..A25T-PWLNR/L06 06 32 25 17 23 300 -12 -6 95°
A32T-PWLNR/L06 06 40 32 22 30 300 -12 -6 95°
A25T-PWLNR/L08 08 32 25 17 23 300 -10 -6 95°WN..0804..
A32T-PWLNR/L08 08 40 32 22 30 300 -10 -6 95°
K600 – coolant adaptor
Designationd1
mmd2
mml1
mm
d1 d2
l1
K600.32.44.137 32 13,7 44
K600.40.46.137 40 13,7 46
K600.50.46.137 50 13,7 46
33Walter – Turning
ORDERING INFORMATION
ISO turning toolholder for ceramic inserts
Designationh = h1mm
bmm
f mm
l1mm
l4mm s Designation
f
b
l1
l4
h
h1
CRDCN3225P09-A 09 32 25 17,2 170 29,0 0° 0° RCGX0907..
CRDCN3225P12-A 12 32 25 18,8 170 38,5 0° 0° RCGX1207..
Designationh = h1mm
bmm
f mm
l1mm
l4mm s Designation
h
h1
b
f
l1
l4
CRDNN2525M12-ID 12 25 25 18,8 150 32,0 -8° 0° RNGN1207..
CRDNN3225P12-ID 12 32 25 18,8 170 32,0 -8° 0° RNGN1207..
Designationh = h1mm
bmm
f mm
l1mm
l4mm s Designation
l4
b
l1
f
h
h1
CRSNR/L2525M12-ID 12 25 25 32,0 150 28,0 -6° -6° RNGN1207..
CRSNR/L3225P12-ID 12 32 25 32,0 170 28,0 -6° -6° RNGN1207..
CRSNR/L3232P15-ID 15 32 32 40,0 170 30,0 -6° -6° RNGN1507..
CRSNR/L3232P19-ID 19 32 32 40,0 170 32,0 -6° -6° RNGN1907..
NEW2012
NEW2012
NEW2012
Strengthened clamp with carbide plate
Set PK254 set
① Clamp screw FS 1473 (15 IP)
② Pin (mounted in toolholder) RS 117
③ Pressure spring FS 1470
④ Clamp PK 245
⑤ Carbide clamping plate FK 371
⑥ Hook for clamping plate FK 373
⑦ Screw for clamping plate FS 1492
⑧ Wrench for hook bolt FS 1490 (7 IP)
Shim for basic shape CN . . 1207 . . AP411-CN1207
Shim for basic shape DN . . 1507 . . AP412-DN1507
Shim for basic shape SN . . 1207 . . AP413-SN1207
①④
②
③
⑤⑥⑦
⑧
Walter Turn clamp holders have been used to mount the PK241 set as standard. By using the PK254 set, the following ceramic inserts without hole can be clamped: CN . . 12 . . , DN . . 15 . . , TN . . 22 . . and WN . . 08 . .
ORDERING INFORMATION
34 Walter – Turning
Cutting data for turning inserts – negative basic shape – Tiger·tec® Silver
Mat
eria
l gro
up
Main material groups and code letters
Bri
nell
hard
ness
HB
Tens
ile s
tren
gth
N/
mm
²
Tens
ile s
tren
gth
(r
ound
ed u
p) N
/mm
²
Mac
hini
ng g
roup
Cutting speed vc [m/min]
WPP10S
f [mm/U]
WPP20S
f [mm/U]
WPP30S
f [mm/U]
Workpiece material 0,10 0,40 0,60 0,10 0,40 0,60 0,10 0,40 0,60
P
Non-alloyed steel
C > 0.25% annealed 125 430 430 P1
•• •
620 470 360 520 380 310 440 300 250
C > 0.25... ≤ 0.55% annealed 190 639 640 P2 530 380 300 440 310 240 370 250 200
C > 0.25... ≤ 0.55% heat treated 210 708 710 P3 400 320 260 330 260 210 270 220 160
C > 0.55% annealed 190 639 640 P4 500 360 280 420 290 220 350 230 180
C > 0.55% heat treated 300 1013 1020 P5 320 240 220 260 190 170 210 140 110
machining steel (short-chipping) annealed 220 745 750 P6 500 360 280 420 290 220 350 230 180
Low-alloyed steel
annealed 175 591 600 P7 460 340 290 380 280 230 310 220 200
heat treated 300 1013 1020 P8 290 230 200 240 170 150 190 120 90
heat treated 380 1282 1290 P9 250 180 140 210 150 110 150 100 70
heat treated 430 1477 1480 P10 60 50
High-alloyed steel and High-alloyed tool steel
annealed 200 675 680 P11 480 340 220 400 280 170 310 220 120
hardened and tempered 300 1013 1020 P12 240 140 120 190 120 90 120 90 70
hardened and tempered 400 1361 1370 P13 70 60
Stainless steelferritic/martensitic, annealed 200 675 680 P14 380 300 260 310 250 200 240 200 150
martensitic, heat treated 330 1114 1120 P15 280 200 160 220 150 110 160 110 100
M Stainless steel
austenitic, quench hardened 200 675 680 M1
austenitic, precipitation hardened (PH) 300 1013 1020 M1
austenitic/ferritic, duplex 230 778 780 M3
K
Malleable cast ironferritic 200 675 680 K1
•• •
320 210 160 280 220 160
pearlitic 260 867 870 K2 270 170 120 240 180 110
Grey cast ironlow tensile strength 180 602 610 K3 580 340 240 510 260 190
high tensile strength/austenitic 245 825 830 K4 320 220 150 240 180 110
Cast iron with spheroidal graphiteferritic 155 518 520 K5 340 240 180 260 190 140
pearlitic 265 885 890 K6 240 180 150 190 140 110
Cast iron with vermicular graphite 200 675 680 K7 290 190 160
N
Aluminium wrought alloysnot precipitation hardenable 30 – – N1
precipitation hardenable, precipitation hardened 100 343 350 N2
Cast aluminium alloys
≤ 12% Si, not precipitation hardenable 75 260 260 N3
≤ 12% Si, precipitation hardenable, precipitation hardened 90 314 320 N4
> 12% Si, not precipitation hardenable 130 447 450 N5
Magnesium alloys 70 250 250 N6
Copper and copper alloys (bronze/brass)
non-alloyed, electrolytic copper 100 343 350 N7
brass, bronze, red brass 90 314 320 N8
Cu-alloys, short-chipping 110 382 390 N9
high-strength, Ampco 300 1013 1020 N10
S
Heat-resistant alloys
Fe-basedannealed 200 675 680 S1
precipitation hardened 280 943 950 S2
Ni or Co base
annealed 250 839 840 S3
precipitation hardened 350 1177 1180 S4
cast 320 1076 1080 S5
Titanium alloys
pure titanium 200 675 680 S6
alpha and beta alloys, precipitation hardened 375 1262 1270 S7
beta alloys 410 1396 1400 S8
Wolfram alloys 300 1013 1020 S9
Molybdenum alloys 300 1013 1020 S10
HHardened steel
hardened and tempered 50 HRC – H1
hardened and tempered 55 HRC – H2
hardened and tempered 60 HRC – H3
Hardened cast iron hardened and tempered 55 HRC – H4
•• Recommended application (the cutting data provided represents the starting values for the recommended application) Note: If dry machining is possible, • Possible application tool life is reduced on average by 20–30%
35Walter – Turning
ORDERING INFORMATION
Cutting data for turning inserts – ceramic cutting tool materials
Mat
eria
l gro
up
Main material groups and code letters
Bri
nell
hard
ness
HB
Tens
ile s
tren
gth
N/m
m²
Tens
ile s
tren
gth
(r
ound
ed u
p) N
/mm
²
Mac
hini
ng g
roup
Cutting speed vc [m/min]
Sialon ceramicWIS10
Whisker ceramicWWS20
ap = 0,10–5,0 mm
f [mm/U]
ap = 0,10–4,0 mm
f [mm/U]
Workpiece material 0,10 0,40 0,60 0,10 0,40 0,60
P
Non-alloyed steel
C > 0.25% annealed 125 430 430 P1
C > 0.25... ≤ 0.55% annealed 190 639 640 P2
C > 0.25... ≤ 0.55% heat treated 210 708 710 P3
C > 0.55% annealed 190 639 640 P4
C > 0.55% heat treated 300 1013 1020 P5
Machining steel (short-chipping) annealed 220 745 750 P6
Low-alloyed steel
annealed 175 591 600 P7
heat treated 300 1013 1020 P8
heat treated 380 1282 1290 P9
heat treated 430 1477 1480 P10
High-alloyed steel and High-alloyed tool steel
annealed 200 675 680 P11
hardened and tempered 300 1013 1020 P12
hardened and tempered 400 1361 1370 P13
Stainless steelferritic/martensitic, annealed 200 675 680 P14
martensitic, heat treated 330 1114 1120 P15
M Stainless steel
austenitic, quench hardened 200 675 680 M1
austenitic, precipitation hardened (PH) 300 1013 1020 M1
austenitic/ferritic, duplex 230 778 780 M3
K
Malleable cast ironferritic 200 675 680 K1
pearlitic 260 867 870 K2
Grey cast ironlow tensile strength 180 602 610 K3
high tensile strength/austenitic 245 825 830 K4
Cast iron with spheroidal graphiteferritic 155 518 520 K5
pearlitic 265 885 890 K6
Cast iron with vermicular graphite 200 675 680 K7
N
Aluminium wrought alloysnot precipitation hardenable 30 – – N1
precipitation hardenable, precipitation hardened 100 343 350 N2
Cast aluminium alloys
≤ 12% Si, not precipitation hardenable 75 260 260 N3
≤ 12% Si, precipitation hardenable, precipitation hardened 90 314 320 N4
> 12% Si, not precipitation hardenable 130 447 450 N5
Magnesium alloys 70 250 250 N6
Copper and copper alloys (bronze/brass)
non-alloyed, electrolytic copper 100 343 350 N7
brass, bronze, red brass 90 314 320 N8
Cu-alloys, short-chipping 110 382 390 N9
high-strength, Ampco 300 1013 1020 N10
S
Heat-resistant alloys
Fe-basedannealed 200 675 680 S1
•• •
precipitation hardened 280 943 950 S2
Ni or Co base
annealed 250 839 840 S3 410 340 280 390 320 240
precipitation hardened 350 1177 1180 S4 320 250 190 330 250 190
cast 320 1076 1080 S5 250 220 180 250 220 190
Titanium alloys
pure titanium 200 675 680 S6
alpha and beta alloys, precipitation hardened 375 1262 1270 S7
beta alloys 410 1396 1400 S8
Wolfram alloys 300 1013 1020 S9
Molybdenum alloys 300 1013 1020 S10
HHardened steel
hardened and tempered 50 HRC – H1
•• •
170 150 120
hardened and tempered 55 HRC – H2 150 120 100
hardened and tempered 60 HRC – H3 130 110 90
Hardened cast iron hardened and tempered 55 HRC – H4 150 120 100
•• Recommended application (the cutting data provided represents the starting values for the recommended application) Note: If dry machining is possible, • Possible application tool life is reduced on average by 20–30%
ORDERING INFORMATION
36
Walter Cut cutting data – parting off, grooving and recessing – Tiger·tec® Silver
Mat
eria
l gro
up
Main material groups and code letters
Bri
nell
hard
ness
HB
Tens
ile s
tren
gth
N/
mm
²
Tens
ile s
tren
gth
(r
ound
ed u
p) N
/mm
²
Mac
hini
ng g
roup
Cutting speed vc [m/min]
WSM13S WSM23S WSM33S WSM43S
Workpiece material
P
Non-alloyed steel
C > 0.25% annealed 125 430 430 P1
•• •
190 200 180 190 170 180 160 170
C > 0.25... ≤ 0.55% annealed 190 639 640 P2 180 180 170 170 160 170 150 160
C > 0.25... ≤ 0.55% heat treated 210 708 710 P3 160 170 150 160 140 150 130 140
C > 0.55% annealed 190 639 640 P4 180 190 170 180 160 170 150 160
C > 0.55% heat treated 300 1013 1020 P5 150 160 140 150 130 140 120 130
Machining steel (short-chipping) annealed 220 745 750 P6 180 190 170 180 160 170 150 160
Low-alloyed steel
annealed 175 591 600 P7 180 190 170 180 150 160 140 150
heat treated 300 1013 1020 P8 150 160 140 150 100 110 90 100
heat treated 380 1282 1290 P9 150 160 140 150 90 100 90 100
heat treated 430 1477 1480 P10
High-alloyed steel and High-alloyed tool steel
annealed 200 675 680 P11 130 140 120 130 110 120 100 110
hardened and tempered 300 1013 1020 P12 110 120 100 110 80 90 70 80
hardened and tempered 400 1361 1370 P13
Stainless steelferritic/martensitic, annealed 200 675 680 P14 180 190 170 180 150 160 130 140
martensitic, heat treated 330 1114 1120 P15 100 120 90 100 70 80 50 60
M Stainless steel
austenitic, quench hardened 200 675 680 M1
•• •
170 190 160 170 140 150 120 130
austenitic, precipitation hardened (PH) 300 1013 1020 M1 100 120 90 100 70 80 50 60
austenitic/ferritic, duplex 230 778 780 M3 150 170 140 150 120 130 100 110
K
Malleable cast ironferritic 200 675 680 K1
•• •
180 190 170 180 160 170
pearlitic 260 867 870 K2 160 170 150 160 140 150
Grey cast ironlow tensile strength 180 602 610 K3 230 220 220 210 210 200
high tensile strength/austenitic 245 825 830 K4 190 180 180 170 170 160
Cast iron with spheroidal graphiteferritic 155 518 520 K5 210 220 200 210 190 200
pearlitic 265 885 890 K6 170 180 160 170 150 160
Cast iron with vermicular graphite 200 675 680 K7
N
Aluminium wrought alloysnot precipitation hardenable 30 – – N1
precipitation hardenable, precipitation hardened 100 343 350 N2
Cast aluminium alloys
≤ 12% Si, not precipitation hardenable 75 260 260 N3
≤ 12% Si, precipitation hardenable, precipitation hardened 90 314 320 N4
> 12% Si, not precipitation hardenable 130 447 450 N5
Magnesium alloys 70 250 250 N6
Copper and copper alloys (bronze/brass)
non-alloyed, electrolytic copper 100 343 350 N7
brass, bronze, red brass 90 314 320 N8
Cu-alloys, short-chipping 110 382 390 N9
high-strength, Ampco 300 1013 1020 N10
S
Heat-resistant alloys
Fe-basedannealed 200 675 680 S1
•• •
100 110 90 100 80 90 70 80
precipitation hardened 280 943 950 S2 50 60 40 50 30 40 25 30
Ni or Co base
annealed 250 839 840 S3 80 90 70 80 60 70 50 60
precipitation hardened 350 1177 1180 S4 70 80 60 70 50 60 40 50
cast 320 1076 1080 S5 70 80 60 70 50 60 40 50
Titanium alloys
pure titanium 200 675 680 S6 150 160 140 150 130 130 110 120
alpha and beta alloys, precipitation hardened 375 1262 1270 S7 50 45 40 40 30 35 25 30
beta alloys 410 1396 1400 S8 40 35 30 30 25 25
Wolfram alloys 300 1013 1020 S9
Molybdenum alloys 300 1013 1020 S10
HHardened steel
hardened and tempered 50 HRC – H1
hardened and tempered 55 HRC – H2
hardened and tempered 60 HRC – H3
Hardened cast iron hardened and tempered 55 HRC – H4
•• Recommended application (the cutting data provided represents the starting values for the recommended application) Note: If dry machining is possible,• Possible application tool life is reduced on average by 20–30%
Parting off
Grooving/groove-turning
TURNING Walter ¤3 ISOturning ¤4¤
Grooving ¤14¤
Orderinginformation ¤20¤
DRILLINGANDTHREADING WalterTitex ¤39¤
Solidcarbidedrills ¤40¤
PCDdrills ¤56¤
Orderinginformation ¤58
Walter ¤91¤
Drills ¤92¤
Counterboredrills ¤96¤
Precisionboring ¤97¤
Orderinginformation ¤98
WalterPrototyp ¤103¤
HSS-E-PMtaps ¤104¤
HSS-Etaps ¤106¤
Solidcarbidethreadformers ¤110¤
Solidcarbidethreadmills ¤112¤
Orderinginformation ¤114¤
MILLING WalterPrototyp ¤155¤
Solidcarbideendmills ¤156¤
Ball-noseendmills ¤162 Orderinginformation ¤166¤
Walter ¤177¤
Thenewgenerationofcutters ¤179¤
Cuttingtoolmaterials ¤182¤
Facemills ¤186¤
Copymills ¤190¤
Orderinginformation ¤192¤
Walteradaptors ¤217¤
Adaptors ¤218¤
Orderinginformation ¤220¤
Alphanumericindex ¤228¤
_TOOLINNOVATIONSINDRILLING
X·tremeperformanceforallapplications.
ProductinnovationsEdition2012-2
Drillingandthreading
40
SOLIDCARBIDEDRILLS
Walter TitexX·tremeStep90–thehigh-performanceoptionforuniversaluse.
THETOOLS
– Solidcarbidehigh-performancechamferingdrillwithandwithoutinternalcooling
– XPLcoating– Diameterrange3.3-14.5mm• Tapdrillholediameter:M4–M16x1.5
– SteplengthinaccordancewithDIN8378– ShankinaccordancewithDIN6535HAandHE
THEAPPLICATION
– Forthread/coreholediameters– ForISOmaterialgroupsP,M,K,N,S,H– Canbeusedwithemulsionandoil– Canbeusedforinclinedexitsandcrossholes– Canbeusedforinclinedandconvexsurfaces– Foruseingeneralengineering,mouldanddiemakingintheautomotiveindustry,andtheenergyindustry
YOURADVANTAGES
– 50%higherproductivity– Universallycompatiblewithallmaterialgroupsandwithcrossholesandinclinedexits
– Improvedholequalitydueto4lands
ShankDIN6535HA
Withinternalcooling
4landsforoptimumholequalityanduseon•Entrysurfacesinclinedupto5°•Holeexitsinclinedupto45°•Workpieceswithcrossholes
XPLcoatingforoptimumcuttingdataandmaximumtoollife
Pointgeometryforprecisepositioning
WalterTitexX·tremeStep90Type:K3299XPL
NEW2012NEW2012
Orderinginformationcanbefoundfrompage¤58¤onwards.
Watchproductvideo:ScanQRcodeorgodirectlyto
http://goo.gl/MvBTg
41WalterTitex–Drilling
Cuttingdata Competition X·tremeInoxvc 98m/min 98m/minN 4600rpm 4600rpmf 0.16mm/rev 0.23mm/revvf 736mm/min 1058mm/min
Workpiecematerial: St52Tool: Walter Titex X·treme Step 90
K3299XPL-M8Diameter6.8mm
Feedrate(mm/min)
+ 44%
10005000 1500
X·treme Step 90 1058
736Competition
Modulehinge
XPLcoatingforoptimumcuttingdataandmaximumtoollife
WalterTitexX·tremeStep90Type:K3899XPL,K3299XPL,K3879XPL
Withinternalcooling
42
SOLIDCARBIDEDRILLS
Walter TitexX·tremePilotStep90–precisepositioningincreasesproductivity.
THETOOLS
– Solidcarbidehigh-performancechamferingpilotdrillwithinternalcooling
– TFTcoating– 150°pointangle– 90°countersinkangle– DimensionsaccordingtoWalterstandard– Drillingdepth•3xDc
– Diameterrange3-16mm– ShankinaccordancewithDIN6535HA
THEAPPLICATION
– FortheISOmaterialgroupsP,M,K,N,S,H– Steppilotdrillforsolidcarbidedeep-holedrillsfromtheAlpha®andX·tremedrillfamiliesfordrillingdepthsgreaterthan12xDc
– Canbeusedwithemulsionandoil– Foruseingeneralengineering,inthehydraulicandautomotiveindustries,formouldmakingandtheenergyindustry
YOURADVANTAGES
– Improvedprocessreliabilityandtoollifeduringdeep-holedrilling
– Significantlyshorterdrillingpath– Notoleranceoverlapswithsolidcarbidedeep-holedrills– Highpositioningaccuracyasaresultofashortchiseledgewidth
WalterTitexX·tremePilotStep90Type:K3281TFT
Pilotingwithchamfer
Pointgeometrywitha150°pointangleforoptimumcentringofthesolidcarbidedeep-holedrill
TFTcoatingforoptimumprotectionagainstwear
Withinternalcooling
90°countersinkangle-forthreadinginthesolidcarbide
deep-holedrill-fordeburringor
chamferingthehole
NEW2012
Orderinginformationcanbefoundfrompage¤59¤onwards.
43WalterTitex–Drilling
ADDITIONALPILOTDRILLSFROMWALTERTITEX
Conicalpiloting
Cylindricalpiloting,flatbottom
Cylindricalpiloting
Cylindricalpiloting
Type:A7191TFT
Type:A6181AML
Type:A6181TFT
Type:K5191TFT
ShankDIN6535HA
AnoverviewofthepilotdrillscanbefoundonpageB4intheGeneralcatalogue2012
44
SOLIDCARBIDEDRILLS
Walter TitexHigh-performancecentredrillsforstraightcontactsurfacesinaccordancewithDIN332A.
THETOOLS
– Solidcarbidecentredrill– DimensionsaccordingtoDIN333A– formA– XPLcoating– For60°centringwithoutprotectivecountersink– ForstraightcontactsurfacesinaccordancewithDIN332A
THEAPPLICATION
– ForISOmaterialgroupsP,M,K,N,S,H– Canbeusedwithemulsionandoil– Foruseonlathesandmachiningcentres
XPLcoatingforoptimumcuttingdataandmaximumtoollife
formAContactsurfacesin
accordancewithDIN332A
YOURADVANTAGES
– A50%increaseinproductivityincomparisonwithuncoatedsolidcarbidecentredrills
– MaximumtoollifeduetotheXPLcoatinginallmaterialgroups
WalterTitexcentredrillType:K1161XPL
AdditionalcentredrillscanbefoundintheprogrammeoverviewonpageB9intheGeneralcatalogue2012
Centringinaccordancewith
DIN332formA DIN332formB DIN332formR DIN332formD DIN332formDR
NEW2012
Orderinginformationcanbefoundfrompage¤85¤onwards.
45
Walter TitexSolidcarbideandcarbide-tippedreamingtoolswithshanktoleranceh6.
WalterTitex–Drilling
THETOOLS
– CarbidereamingtoolsforH7fits– DimensionssimilartoDIN8093• Straight-flutedformAforbasicandthroughholes• Spiral-flutedformCforthroughholes
– Differentialpitch
THEAPPLICATION
– ForISOmaterialgroupsP,M,K,N,S,H,O– Canbeusedwithemulsionandoil– Foruseingeneralengineering,mouldanddiemakingintheautomotiveindustry,andtheenergyindustry
YOURADVANTAGES
– Maximumroundnessandsurfacefinishqualityasaresultofextremeunevenspacing
– Entireshankdiameterwithh6toleranceforaccommoda-tioninshrink-fitandhydraulicexpansionchucks
WalterTitexreamingtoolsType:F2162,F2171
NEW2012
Forthroughholes
Forblindandthroughholes
Shanktoleranceh6
Shanktoleranceh6
Orderinginformationcanbefoundfrompage¤86¤onwards.
46
SOLIDCARBIDEDRILLS
Walter TitexX·tremeInox–thehigh-performanceoptionforstainlesssteels.
THETOOLS
– Solidcarbidehigh-performancedrill– TTPcoating– Dimensionsto• DIN6537L‡5xDc
– Diameterrange3-20mm– ShankinaccordancewithDIN6535HA
THEAPPLICATION
– ForISOmaterialgroupM– Canbeusedwithemulsionandoil– Foruseingeneralengineeringandintheautomotive,aerospace,medical,foodandvalveindustries
YOURADVANTAGES
– Reducedcuttingforcesduetonewtypeofgeometry– Significantincreaseinproductivityoveruniversaldrillingandboringtools
– Lowburrformationonentryandexit– Excellentsurfacequalityoncomponent– Stablemaincuttingedgesguaranteemaximumprocessreliability
NEW2012
Landforoptimumholequality
andlowfriction
Flutegeometryensuresreliablechipevacuationandguaranteesprocessreliability
TTPcoatingforoptimumcuttingdataandamaximumincreaseinproductivity
Orderinginformationcanbefoundfrompage¤60¤onwards.
Watchproductvideo:ScanQRcodeorgodirectlyto
http://goo.gl/96NSH
47WalterTitex–Drilling
ShankDIN6535HA
Pointgeometryforreducedcuttingforces,lowburrformationandstablecuttingedges
Cuttingdata Competition X·tremeInoxvc 60m/min 70m/minN 1345rpm 1570rpmf 0.2mm/rev 0.3mm/revvf 269mm/min 471mm/min
Workpiecematerial: 1.4542Tool: Walter Titex X·treme Inox
A3393TTP-14.2Diameter14.2mm
Toollife(m)
Feedrate(mm/min)
+ 130%
+ 75%
20
400
10
200
0
0
30
600
X·treme Inox 21
X·treme Inox 471
9
269
Competition
Competition
WalterTitexX·tremeInoxType:A3393TTP
High-pressurerailforfleececompressor
48
SOLIDCARBIDEDRILLS
Walter TitexX·treme–theuniversalhigh-performancedrill.
THETOOL
– Solidcarbidehigh-performancedrill– XPLcoating– Dimensionsto• DIN6537K‡3xDc• DIN6537L‡5xDc
– Diameterrange3-25mm– ShankinaccordancewithDIN6535HAandHE
THEAPPLICATION
– ForISOmaterialgroupsP,M,K,N,S,H– Canbeusedwithemulsionandoil– Canbeusedforinclinedexitsandcrossholes– Canbeusedforinclinedandconvexsurfaces– Foruseingeneralengineering,mouldanddiemakingandintheautomotiveandenergyindustry
WalterTitexX·tremeTypes:A3279XPL/A3879XPL
4landsforoptimumholequalityanduseon
• entrysurfacesinclinedupto5°• holeexitsinclinedupto45°• workpieceswithcrossholes
Orderinginformationcanbefoundfrompage¤63¤onwards.
Pointgeometryforprecisepositioning
ShankDIN6535HA
ShankDIN6535HE
YOURADVANTAGES
– 50%higherproductivity– Universallycompatiblewithallmaterialgroupsandwithcrossholesandinclinedexits
– Improvedholequalitydueto4lands
49WalterTitex–Drilling
Magneticcoreforcontrollers
Cuttingdatavc 122m/minN 3107rpmf 0.23mm/revvf 715mm/min
Workpiecematerial: C15Tool: Walter Titex X·treme
A3279XPL-12.5Diameter12.5mm
WalterTitexX·tremeTypes:A3379XPL/A3979XPL
XPLcoatingforoptimumcuttingdataandmaximumtoollife
Toollife(m)
+ 330%
ShankDIN6535HA
ShankDIN6535HE
2001000 300
Previously
X·treme 235
69
50
SOLIDCARBIDEDRILLS
Walter TitexX·tremedrills–coolontheinside,strongontheoutside.
YOURADVANTAGES
– 50%higherproductivity– Universallycompatiblewithallmaterialgroupsandwithcrossholesandinclinedexits
– Improvedholequalitydueto4lands
THETOOL
– Solidcarbidehigh-performancedrillwithinternalcooling
– XPLcoating– Dimensionsto• DIN6537K‡3xDc• DIN6537L‡5xDc
– Diameterrange3-25mm– ShankinaccordancewithDIN6535HAandHE
THEAPPLICATION
– ForallmaterialgroupsP,M,K,N,S,H– Canbeusedwithemulsionandoil– Canbeusedforinclinedexitsandcrossholes– Canbeusedforinclinedandconvexsurfaces– Foruseingeneralengineering,mouldanddiemakingintheautomotiveindustry,andtheenergyindustry
WalterTitexX·treme Types:A3299XPL/A3899XPL
XPLcoatingforoptimumcuttingdataandmaximumtoollife
4landsforoptimumholequalityanduseon
• entrysurfacesinclinedupto5°• holeexitsinclinedupto45°• workpieceswithcrossholes
Pointgeometryforprecisepositioning
ShankDIN6535HA
ShankDIN6535HE
Orderinginformationcanbefoundfrompage¤77¤onwards.
51WalterTitex–Drilling
Pointgeometryforprecisepositioning
Transmissionshaft:Flangedrilling
Cuttingdata
Previously X·tremevc 56m/min 91m/minN 2621rpm 4260rpmf 0.11mm/rev 0.19mm/revvf 288mm/min 809mm/min
Workpiecematerial: 42CrMo4Tool: A3399XPL-6.8
Diameter6.8mm
4landsforoptimumholequalityanduseon
• entrysurfacesinclinedupto5°• holeexitsinclinedupto45°• workpieceswithcrossholes
XPLcoatingforoptimumcuttingdataandmaximumtoollife
WalterTitexX·treme Types:A3399XPL/A3999XPL
ShankDIN6535HA
ShankDIN6535HE
Watchproductvideo:ScanQRcodeorgodirectlyto
http://goo.gl/dzSSy
0
Feedrate(mm/min)
Previously
X·treme 809
+ 208%
288
500 10000
52 Orderinginformationcanbefoundfrompage¤84¤onwards.
SOLIDCARBIDEDRILLS
Walter Titexhigh-performancedrillsformicroapplications–maximumperformance,minimaldimensions.
THETOOL
– Solidcarbidehigh-performancedrillwithinternalcooling
– AMLcoating(AlTiN)– AMPcoating(AlTiNtipcoating)– Dimensions• 5xDc• 8xDc• 12xDc
– Diameterrange2-2.95mm– ShankinaccordancewithDIN6535HA
THEAPPLICATION
– ForISOmaterialgroupsP,M,K,N– Canbeusedwithemulsionandoil– Foruseingeneralengineering,mouldanddiemakingintheautomotiveindustry,andtheenergyindustry
X·tremeM;X·tremeDM8andDM12 Types:A3389AML/A6489AMP/A6589AMP
ShankDIN6535HA
AMPcoatingforextremelyhigh-performancecuttingdataandextremelylongtoollife
AMLcoatingforextremelyhigh-performancecuttingdataandextremelylongtoollife
Polishedfluteformaximumchipremoval
Pointgeometryforprecisepositioning
53WalterTitex–Drilling
YOURADVANTAGES
– Increaseinproductivitythroughupto50%higherworkpiecevaluesincomparisontoconventionalsolidcarbidemicrodrills
– Highlevelofprocessreliabilityduetonewtypeofpointandflutegeometry
– Polishedflutesensurereliablechipevacuation
Democomponent
Cuttingdata
Previously X·treme DM12vc 50m/min 60m/minN 7960rpm 9550rpmf 0.04mm/rev 0.06mm/revvf 320mm/min 573mm/min
Workpiecematerial: 1.4571Tool: A6589AMP-2
Diameter2mm
Feedrate(mm/min)
Previously
X·treme DM12 573
+80%
320
0 200 600400
Numberofholes
Previously
X·treme DM12 3000
+45%
2050
0 1000 30002000
Watchproductvideo:ScanQRcodeorgodirectlyto
http://goo.gl/FmrPC
54
SOLIDCARBIDEDRILLS
Walter TitexXD®drillingtechnology–extremelyhighprecisioninoneoperationdownto70xDc.
THETOOL
– Solidcarbidehigh-performancedrillwithinternalcooling– TFTandXPLtipcoating– Drillingdepthsdownto70xDcWITHOUTpeckingcycle– Diameterrange5-12mm– ShankinaccordancewithDIN6535HA
THEAPPLICATION
– ForISOmaterialgroupsP,K,N– Canbeusedwithemulsionandoil– Canbeusedforinclinedexitsandcrossholes– Foruseingeneralengineeringandthehydraulicsandautomotiveindustry
Steeringgear
Cuttingdata
Previously:singleedgegundrills XD70 Technologyvc 70m/min 91m/minN 3600rpm 4260rpmf 0.05mm/rev 0.19mm/revvf 179mm/min 809mm/min
Feedrate
0 500 1000
XD Technology
Previously
+450%
Workpiecematerial: GGG50Tool: Diameter6.2mmHoledepth: 286mm-46xDc
YOURADVANTAGES
– Upto10timestheproductivityofsingleedgegundrills– Drillingwithoutpecking– Extremelyhighprocessreliabilityindeepdrillingapplications
– Suitableforusewithlowcoolantpressuresfrom20bar– Compatiblewithvariousmaterialgroups,includingISOP,K,N
– Canbeusedforcrossholesandinclinedexits
Coatings• TFTtipcoating• XPLtipcoating
4landsforoptimumholequalityanduseon
• inclinedholeexits• workpieceswithcrossholes
Polishedfluteforreliablechipevacuation
55WalterTitex–Drilling
XD70
XD30
XD25
XD20
XD16
Watchproductvideo:ScanQRcodeorgodirectlyto
http://goo.gl/yQB64
Watchproductanimation:ScanQRcodeorgodirectlyto
http://goo.gl/ZBIMm
56
PCDDRILLS
Walter TitexPCDrivetcountersinksandtwistdrillsforcompositematerials.
THETOOLS
– DrillingandreamingtoolsandrivetcountersinkswithhelicalPCDdrillpoint
– Optimisedforcompositematerials– Geometrydesignedtoreducecuttingforce,therebyavoidingdelamination(frayedholeexit)
– Multiplereconditioningpossible
THEAPPLICATION
– ForawidevarietyofCFRPmaterials– GFRPmaterials– Foruseonabrasivematerialsintheaerospaceindustryandallcompositematerialmachiningsectors
– Forboresorrivetholeswithcountersinkwherehighqualityisrequired
– Suitableforfullyorsemi-automatedproductionprocesses(CNCandpowerfeed)
YOURADVANTAGES
– Longtoollife,especiallyincomparisontoPCDcoatedtools
– Processreliabilityevenathighcuttingparameters– AhighlevelofprocessreliabilityduetoPCDsintertech-nology;noriskoftoolfailurecausedbyafailedsolderjoint
– Everytooldiameterbetween2.0mmand6.4mmavailable– Reductionoftypicalapplicationproblemssuchasdelami-nationandburrs
– Regrindingservicetoreducetoolcosts
PCDrivetcountersinks PCDtwistdrills
Custom-designedpointgeometryforPCDdrillpoints
Component-definedchamferstep
Tungstencarbidedrillbody
5.17 36.220.7 51.7 56.810.3 41.325.815.5 46.531.0
57
THEMATERIAL
– Variouscompositematerialsfortheaerospaceindustry
– Pre-impregnatedfibresindifferentdirections(0°/45°,90°)
– Linerswithlinenfabric
THEHOLES
– Highlevelofqualityatholeexitaftere.g.600holesdrilled
– Verylittledelaminationorfinefibresvisibleatholeexit
– Goodsurfacequalityinthehole
Holesurface
Fzhole1-15 Fzhole586-600
Axialforcecomparisonperrowforthefirstandlastholes(586-600hole)
Permitteddiameterfordelamination8.35mmwithatooldiameterof6.35mm
Holeexit600thhole
THEFORCES
– Minimisedaxialforceforreducedtendencytodelaminate
– Moderateincreaseinforceuptoendoftoollife
WHYPCD?
– Significantimprove-mentintoollife
– Improvedholequality– Highercuttingparam-eters
– Sharpercuttingedge– Reducedthermalimpact
– Optimumthermalcon-ductivityofthecuttingtoolmaterial
– Minimisedriskofdela-mination
– Drymachiningpossible– Repeatedregrindingpossible
WalterTitex–Drilling
ORDERING INFORMATION
58 Walter Titex – Drilling5858
X·treme Step 90 K3299XPL
for thread
Dcm7mm
d1h6
mm
d10h8
mmLc
mml1
mml2
mml5
mmDesignationK3299XPL…
d1
d10
Lc
l1
Dc 90°
l2 l5
M 4 3,3 6 4,5 11,4 66 28 36 - M4
M 5 4,2 6 6 13,6 66 28 36 - M5
M 6 5 8 7 16,5 79 41 36 - M6
M 8 6,8 10 9,5 21 89 47 40 - M8
M 10 8,5 12 12 25,5 102 55 45 - M10
M 12 10,2 14 14 30 107 60 45 - M12
M 14 12 16 16 34,5 115 65 48 - M14
M 16 14 18 18 38,5 123 73 48 - M16
X·treme Step 90 K3899XPL
for thread
Dcm7mm
d1h6
mm
d10h8
mmLc
mml1
mml2
mml5
mmDesignationK3899XPL…
d1
d10
Lc
l1
Dc 90°
l2 l5
M 4 3,3 6 4,5 11,4 66 28 36 - M4
M 5 4,2 6 6 13,6 66 28 36 - M5
M 6 5 8 7 16,5 79 41 36 - M6
M 8 6,8 10 9,5 21 89 47 40 - M8
M 10 8,5 12 12 25,5 102 55 45 - M10
M 12 10,2 14 14 30 107 60 45 - M12
M 14 12 16 16 34,5 115 65 48 - M14
M 16 14 18 18 38,5 123 73 48 - M16
X·treme Step 90 K3879XPL
for thread
Dcm7mm
d1h6
mm
d10h8
mmLc
mml1
mml2
mml5
mmDesignationK3879XPL…
d1
d10
Lc
l1
Dc 90°
l2 l5
M 4 3,3 6 4,5 11,4 66 28 36 - M4
M 5 4,2 6 6 13,6 66 28 36 - M5
M 6 5 8 7 16,5 79 41 36 - M6
M 8 6,8 10 9,5 21 89 47 40 - M8
M 8 x 1 7,0 10 9,5 21 89 47 40 - M8x1
M 10 8,5 12 12 25,5 102 55 45 - M10
M 10 x 1 9 12 12 25,5 102 55 45 - M10x1
M 12 10,2 14 14 30 107 60 45 - M12
M 12 x 1,5 10,5 14 14 30 107 60 45 - M12x1,5
M 14 12 16 16 34,5 115 65 48 - M14
M 14 x 1,5 12,5 16 16 34,5 115 65 48 - M14x1,5
M 16 14 18 18 38,5 123 73 48 - M16
M 16 x 1,5 14,5 18 18 38,5 123 73 48 - M16x1,5
NEW2012
NEW2012
NEW2012
59Walter Titex – Drilling
ORDERING INFORMATION
X·treme Pilot Step 90 K3281TFT
Dcp7
mmØ
inches/no.
d1h6
mm
d10h8
mmLc
mml1
mml2
mml5
mmDesignationK3281TFT…
3 6 6 6 66 20 36 - 3
3,175 1/8IN 6 6 7,6 66 20 36 - 1/8IN
3,5 6 6 7,6 66 20 36 - 3,5
3,572 9/64IN 6 6 7,6 66 20 36 - 9/64IN
3,969 5/32IN 6 6 9,6 66 22 36 - 5/32IN
4 6 6 9,6 66 22 36 - 4
4,5 6 6 9,6 66 22 36 - 4,5
4,763 3/16IN 8 8 12 79 28 36 - 3/16IN
4,8 8 8 12 79 28 36 - 4,8
5 8 8 12 79 28 36 - 5
5,5 8 8 12 79 28 36 - 5,5
5,556 7/32IN 8 8 12 79 28 36 - 7/32IN
5,8 8 8 12 79 28 36 - 5,8
6 8 8 12 79 28 36 - 6
6,1 10 10 14 89 34 40 - 6,1
6,35 1/4IN 10 10 14 89 34 40 - 1/4IN
6,5 10 10 14 89 34 40 - 6,5
6,8 10 10 14 89 34 40 - 6,8
7 10 10 14 89 34 40 - 7
7,144 9/32IN 12 12 16 102 40 45 - 9/32IN
7,4 12 12 16 102 40 45 - 7,4
7,5 12 12 16 102 40 45 - 7,5
7,938 5/16IN 12 12 16 102 40 45 - 5/16IN
8 12 12 16 102 40 45 - 8
8,3 12 12 20 102 44 45 - 8,3
8,5 12 12 20 102 44 45 - 8,5
8,731 11/32IN 12 12 20 102 44 45 - 11/32IN
9 12 12 20 102 44 45 - 9
9,525 3/8IN 12 12 20 102 44 45 - 3/8IN
9,8 12 12 20 102 44 45 - 9,8
10 12 12 20 102 44 45 - 10
10,2 14 14 24 107 52 45 - 10,2
10,319 13/32IN 14 14 24 107 52 45 - 13/32IN
11 14 14 24 107 52 45 - 11
11,113 7/16IN 14 14 24 107 52 45 - 7/16IN
11,5 14 14 24 107 52 45 - 11,5
11,8 14 14 24 107 52 45 - 11,8
11,906 15/32IN 14 14 24 107 52 45 - 15/32IN
12 14 14 24 107 52 45 - 12
12,7 1/2IN 16 16 28 115 58 48 - 1/2IN
13 16 16 28 115 58 48 - 13
14 16 16 28 115 58 48 - 14
14,288 9/16IN 18 18 32 123 66 48 - 9/16IN
15 18 18 32 123 66 48 - 15
16 18 18 32 123 66 48 - 16
NEW2012
d1
d10
Lc
l1
Dc 90°
l2 l5
ORDERING INFORMATION
60 Walter Titex – Drilling
X·treme Inox A3393TTP
Dcm7mm
Ø inches/no.
d1h6
mmLc
mml1
mml2
mml5
mmDesignationA3393TTP…
d1
Lcl5
l1
Dc
l2
3.000 6 23 66 28 36 -3
3.100 23 6 66 28 36 -3.1
3.175 1/8 23 6 66 28 36 -1/8IN
3.200 23 6 66 28 36 -3.2
3.250 23 6 66 28 36 -3.25
3.300 23 6 66 28 36 -3.3
3.400 23 6 66 28 36 -3.4
3.500 23 6 66 28 36 -3.5
3.600 23 6 66 28 36 -3.6
3.700 23 6 66 28 36 -3.7
3.800 29 6 74 36 36 -3.8
3.900 29 6 74 36 36 -3.9
3.969 5/32 29 6 74 36 36 -5/32IN
4.000 29 6 74 36 36 -4
4.100 29 6 74 36 36 -4.1
4.200 29 6 74 36 36 -4.2
4.300 29 6 74 36 36 -4.3
4.400 29 6 74 36 36 -4.4
4.500 29 6 74 36 36 -4.5
4.600 29 6 74 36 36 -4.6
4.650 29 6 74 36 36 -4.65
4.700 29 6 74 36 36 -4.7
4.763 3/16 35 6 82 44 36 -3/16IN
4.800 35 6 82 44 36 -4.8
4.900 35 6 82 44 36 -4.9
5.000 35 6 82 44 36 -5
5.100 35 6 82 44 36 -5.1
5.200 35 6 82 44 36 -5.2
5.300 35 6 82 44 36 -5.3
5.400 35 6 82 44 36 -5.4
5.500 35 6 82 44 36 -5.5
5.550 35 6 82 44 36 -5.55
5.556 7/32 35 6 82 44 36 -7/32IN
5.600 35 6 82 44 36 -5.6
5.700 35 6 82 44 36 -5.7
5.800 35 6 82 44 36 -5.8
5.900 35 6 82 44 36 -5.9
6.000 35 6 82 44 36 -6
6.100 43 8 91 53 36 -6.1
6.200 43 8 91 53 36 -6.2
6.300 43 8 91 53 36 -6.3
6.350 1/4 43 8 91 53 36 -1/4IN
6.400 43 8 91 53 36 -6.4
6.500 43 8 91 53 36 -6.5
6.600 43 8 91 53 36 -6.6
6.700 43 8 91 53 36 -6.7
6.800 43 8 91 53 36 -6.8
6.900 43 8 91 53 36 -6.9
7.000 43 8 91 53 36 -7
7.100 43 8 91 53 36 -7.1
7.144 9/32 43 8 91 53 36 -9/32IN
7.200 43 8 91 53 36 -7.2
7.300 43 8 91 53 36 -7.3
7.400 43 8 91 53 36 -7.4
7.500 43 8 91 53 36 -7.5
7.600 43 8 91 53 36 -7.6
7.700 43 8 91 53 36 -7.7
NEW2012
61Walter Titex – Drilling
ORDERING INFORMATION
X·treme Inox A3393TTP
Dcm7mm
Ø inches/no.
d1h6
mmLc
mml1
mml2
mml5
mmDesignationA3393TTP…
7.800 43 8 91 53 36 -7.8
7.900 43 8 91 53 36 -7.9
7.938 5/16 43 8 91 53 36 -5/16IN
8.000 43 8 91 53 36 -8
8.100 49 10 103 61 40 -8.1
8.200 49 10 103 61 40 -8.2
8.300 49 10 103 61 40 -8.3
8.400 49 10 103 61 40 -8.4
8.500 49 10 103 61 40 -8.5
8.600 49 10 103 61 40 -8.6
8.700 49 10 103 61 40 -8.7
8.731 11/32 49 10 103 61 40 -11/32IN
8.800 49 10 103 61 40 -8.8
8.900 49 10 103 61 40 -8.9
9.000 49 10 103 61 40 -9
9.100 49 10 103 61 40 -9.1
9.200 49 10 103 61 40 -9.2
9.300 49 10 103 61 40 -9.3
9.400 49 10 103 61 40 -9.4
9.500 49 10 103 61 40 -9.5
9.525 3/8 49 10 103 61 40 -3/8IN
9.600 49 10 103 61 40 -9.6
9.700 49 10 103 61 40 -9.7
9.800 49 10 103 61 40 -9.8
9.900 49 10 103 61 40 -9.9
10.000 49 10 103 61 40 -10
10.100 56 12 118 71 45 -10.1
10.200 56 12 118 71 45 -10.2
10.300 56 12 118 71 45 -10.3
10.319 13/32 56 12 118 71 45 -13/32IN
10.400 56 12 118 71 45 -10.4
10.500 56 12 118 71 45 -10.5
10.600 56 12 118 71 45 -10.6
10.700 56 12 118 71 45 -10.7
10.800 56 12 118 71 45 -10.8
10.900 56 12 118 71 45 -10.9
11.000 56 12 118 71 45 -11
11.100 56 12 118 71 45 -11.1
11.113 7/16 56 12 118 71 45 -7/16IN
11.200 56 12 118 71 45 -11.2
11.300 56 12 118 71 45 -11.3
11.400 56 12 118 71 45 -11.4
11.500 56 12 118 71 45 -11.5
11.600 56 12 118 71 45 -11.6
11.700 56 12 118 71 45 -11.7
11.800 56 12 118 71 45 -11.8
11.900 56 12 118 71 45 -11.9
11.906 15/32 56 12 118 71 45 -15/32IN
12.000 56 12 118 71 45 -12
12.500 60 14 124 77 45 -12.5
12.700 1/2 60 14 124 77 45 -1/2IN
12.800 60 14 124 77 45 -12.8
13.000 60 14 124 77 45 -13
13.494 17/32 60 14 124 77 45 -17/32IN
13.500 60 14 124 77 45 -13.5
13.800 60 14 124 77 45 -13.8
14.000 63 16 133 83 48 -14
NEW2012
d1
Lcl5
l1
Dc
l2
ORDERING INFORMATION
62 Walter Titex – Drilling
X·treme Inox A3393TTP
Dcm7mm
Ø inches/no.
d1h6
mmLc
mml1
mml2
mml5
mmDesignationA3393TTP…
14.288 9/16 63 16 133 83 48 -9/16IN
14.500 63 16 133 83 48 -14.5
14.800 63 16 133 83 48 -14.8
15.000 63 16 133 83 48 -15
15.500 63 16 133 83 48 -15.5
15.800 63 16 133 83 48 -15.8
15.875 5/8 63 16 133 83 48 -5/8IN
16.000 63 16 133 83 48 -16
16.500 71 18 143 93 48 -16.5
16.800 71 18 143 93 48 -16.8
17.000 71 18 143 93 48 -17
17.500 71 18 143 93 48 -17.5
17.800 71 18 143 93 48 -17.8
18.000 71 18 143 93 48 -18
18.500 77 20 153 101 50 -18.5
18.800 77 20 153 101 50 -18.8
19.000 77 20 153 101 50 -19
19.050 3/4 77 20 153 101 50 -3/4IN
19.500 77 20 153 101 50 -19.5
19.800 77 20 153 101 50 -19.8
20.000 77 20 153 101 50 -20
NEW2012
d1
Lcl5
l1
Dc
l2
63Walter Titex – Drilling
ORDERING INFORMATION
X·treme A3279XPL
Dcm7mm
Ø inches/no.
d1h6
mmLc
mml1
mml2
mml5
mmDesignationA3279XPL…
d1
Lcl5
l1
Dc
l2
3,000 6 14 62 20 36 -3
3,100 6 14 62 20 36 -3.1
3,175 1/8 6 14 62 20 36 -1/8IN
3,200 6 14 62 20 36 -3.2
3,250 6 14 62 20 36 -3.25
3,300 6 14 62 20 36 -3.3
3,400 6 14 62 20 36 -3.4
3,500 6 14 62 20 36 -3.5
3,572 9/64 6 14 62 20 36 -9/64IN
3,600 6 14 62 20 36 -3.6
3,650 6 14 62 20 36 -3.65
3,700 6 14 62 20 36 -3.7
3,800 6 17 66 24 36 -3.8
3,900 6 17 66 24 36 -3.9
3,969 5/32 6 17 66 24 36 -5/32IN
4,000 6 17 66 24 36 -4
4,100 6 17 66 24 36 -4.1
4,200 6 17 66 24 36 -4.2
4,300 6 17 66 24 36 -4.3
4,366 11/64 6 17 66 24 36 -11/64IN
4,400 6 17 66 24 36 -4.4
4,500 6 17 66 24 36 -4.5
4,600 6 17 66 24 36 -4.6
4,650 6 17 66 24 36 -4.65
4,700 6 17 66 24 36 -4.7
4,763 3/16 6 20 66 28 36 -3/16IN
4,800 6 20 66 28 36 -4.8
4,900 6 20 66 28 36 -4.9
5,000 6 20 66 28 36 -5
5,100 6 20 66 28 36 -5.1
5,159 13/64 6 20 66 28 36 -13/64IN
5,200 6 20 66 28 36 -5.2
5,300 6 20 66 28 36 -5.3
5,400 6 20 66 28 36 -5.4
5,500 6 20 66 28 36 -5.5
5,550 6 20 66 28 36 -5.55
5,556 7/32 6 20 66 28 36 -7/32IN
5,600 6 20 66 28 36 -5.6
5,700 6 20 66 28 36 -5.7
5,800 6 20 66 28 36 -5.8
5,900 6 20 66 28 36 -5.9
5,953 15/64 6 20 66 28 36 -15/64IN
6,000 6 20 66 28 36 -6
6,100 8 24 79 34 36 -6.1
6,200 8 24 79 34 36 -6.2
6,300 8 24 79 34 36 -6.3
6,350 1/4 8 24 79 34 36 -1/4IN
6,400 8 24 79 34 36 -6.4
6,500 8 24 79 34 36 -6.5
6,600 8 24 79 34 36 -6.6
6,700 8 24 79 34 36 -6.7
6,747 17/64 8 24 79 34 36 -17/64IN
6,800 8 24 79 34 36 -6.8
6,900 8 24 79 34 36 -6.9
7,000 8 24 79 34 36 -7
7,100 8 29 79 41 36 -7.1
7,144 9/32 8 29 79 41 36 -9/32IN
ORDERING INFORMATION
64 Walter Titex – Drilling
X·treme A3279XPL
Dcm7mm
Ø inches/no.
d1h6
mmLc
mml1
mml2
mml5
mmDesignationA3279XPL…
d1
Lcl5
l1
Dc
l2
7,200 8 29 79 41 36 -7.2
7,300 8 29 79 41 36 -7.3
7,400 8 29 79 41 36 -7.4
7,500 8 29 79 41 36 -7.5
7,541 19/64 8 29 79 41 36 -19/64IN
7,550 8 29 79 41 36 -7.55
7,600 8 29 79 41 36 -7.6
7,700 8 29 79 41 36 -7.7
7,800 8 29 79 41 36 -7.8
7,900 8 29 79 41 36 -7.9
7,938 5/16 8 29 79 41 36 -5/16IN
8,000 8 29 79 41 36 -8
8,100 10 35 89 47 40 -8.1
8,200 10 35 89 47 40 -8.2
8,300 10 35 89 47 40 -8.3
8,334 8/25 10 35 89 47 40 -8/25IN
8,400 10 35 89 47 40 -8.4
8,500 10 35 89 47 40 -8.5
8,600 10 35 89 47 40 -8.6
8,700 10 35 89 47 40 -8.7
8,731 11/32 10 35 89 47 40 -11/32IN
8,800 10 35 89 47 40 -8.8
8,900 10 35 89 47 40 -8.9
9,000 10 35 89 47 40 -9
9,100 10 35 89 47 40 -9.1
9,128 23/64 10 35 89 47 40 -23/64IN
9,200 10 35 89 47 40 -9.2
9,300 10 35 89 47 40 -9.3
9,400 10 35 89 47 40 -9.4
9,500 10 35 89 47 40 -9.5
9,525 3/8 10 35 89 47 40 -3/8IN
9,550 10 35 89 47 40 -9.55
9,600 10 35 89 47 40 -9.6
9,700 10 35 89 47 40 -9.7
9,800 10 35 89 47 40 -9.8
9,900 10 35 89 47 40 -9.9
9,922 25/64 10 35 89 47 40 -25/64IN
10,000 10 35 89 47 40 -10
10,100 12 40 102 55 45 -10.1
10,200 12 40 102 55 45 -10.2
10,300 12 40 102 55 45 -10.3
10,319 13/32 12 40 102 55 45 -13/32IN
10,400 12 40 102 55 45 -10.4
10,500 12 40 102 55 45 -10.5
10,600 12 40 102 55 45 -10.6
10,700 12 40 102 55 45 -10.7
10,716 27/64 12 40 102 55 45 -27/64IN
10,800 12 40 102 55 45 -10.8
10,900 12 40 102 55 45 -10.9
11,000 12 40 102 55 45 -11
11,100 12 40 102 55 45 -11.1
11,113 7/16 12 40 102 55 45 -7/16IN
11,200 12 40 102 55 45 -11.2
11,300 12 40 102 55 45 -11.3
11,400 12 40 102 55 45 -11.4
11,500 12 40 102 55 45 -11.5
11,509 33/76 12 40 102 55 45 -33/76IN
65Walter Titex – Drilling
ORDERING INFORMATION
X·treme A3279XPL
Dcm7mm
Ø inches/no.
d1h6
mmLc
mml1
mml2
mml5
mmDesignationA3279XPL…
d1
Lcl5
l1
Dc
l2
11,550 12 40 102 55 45 -11.55
11,600 12 40 102 55 45 -11.6
11,700 12 40 102 55 45 -11.7
11,800 12 40 102 55 45 -11.8
11,900 12 40 102 55 45 -11.9
11,906 15/32 12 40 102 55 45 -15/32IN
12,000 12 40 102 55 45 -10
12,100 14 43 107 60 45 -12.1
12,200 14 43 107 60 45 -12.2
12,250 14 43 107 60 45 -12.25
12,300 14 43 107 60 45 -12.3
12,303 31/64 14 43 107 60 45 -31/64IN
12,400 14 43 107 60 45 -12.4
12,500 14 43 107 60 45 -12.5
12,600 14 43 107 60 45 -12.6
12,700 14 43 107 60 45 -12.7
12,700 1/2 14 43 107 60 45 -1/2IN
12,750 14 43 107 60 45 -12.75
12,800 14 43 107 60 45 -12.8
12,900 14 43 107 60 45 -12.9
13,000 14 43 107 60 45 -13
13,100 14 43 107 60 45 -13.1
13,200 14 43 107 60 45 -13.2
13,300 14 43 107 60 45 -13.3
13,400 14 43 107 60 45 -13.4
13,494 29/85 14 43 107 60 45 -29/85IN
13,500 14 43 107 60 45 -13.5
13,600 14 43 107 60 45 -13.6
13,700 14 43 107 60 45 -13.7
13,800 14 43 107 60 45 -13.8
13,900 14 43 107 60 45 -13.9
14,000 14 43 107 60 45 -14
14,100 16 45 115 65 48 -14.1
14,200 16 45 115 65 48 -14.2
14,288 9/16 16 45 115 65 48 -9/16IN
14,300 16 45 115 65 48 -14.3
14,400 16 45 115 65 48 -14.4
14,500 16 45 115 65 48 -14.5
14,600 16 45 115 65 48 -14.6
14,700 16 45 115 65 48 -14.7
14,750 16 45 115 65 48 -14.75
14,800 16 45 115 65 48 -14.8
15,000 16 45 115 65 48 -15
15,100 16 45 115 65 48 -15.1
15,200 16 45 115 65 48 -15.2
15,300 16 45 115 65 48 -15.3
15,500 16 45 115 65 48 -15.5
15,600 16 45 115 65 48 -15.6
15,700 16 45 115 65 48 -15.7
15,800 16 45 115 65 48 -15.8
15,875 5/8 16 45 115 65 48 -5/8IN
15,900 16 45 115 65 48 -15.9
16,000 16 45 115 65 48 -16
16,100 18 51 123 73 48 -16.1
16,200 18 51 123 73 48 -16.2
16,300 18 51 123 73 48 -16.3
16,400 18 51 123 73 48 -16.4
ORDERING INFORMATION
66 Walter Titex – Drilling6666
X·treme A3279XPL
Dcm7mm
Ø inches/no.
d1h6
mmLc
mml1
mml2
mml5
mmDesignationA3279XPL…
d1
Lcl5
l1
Dc
l2
16,500 18 51 123 73 48 -16.5
16,600 18 51 123 73 48 -16.6
16,700 18 51 123 73 48 -16.7
16,750 18 51 123 73 48 -16.75
16,800 18 51 123 73 48 -16.8
17,000 18 51 123 73 48 -17
17,200 18 51 123 73 48 -17.2
17,300 18 51 123 73 48 -17.3
17,500 18 51 123 73 48 -17.5
17,600 18 51 123 73 48 -17.6
17,700 18 51 123 73 48 -17.7
17,800 18 51 123 73 48 -17.8
18,000 18 51 123 73 48 -18
18,200 20 55 131 79 50 -18.2
18,500 20 55 131 79 50 -18.5
18,700 20 55 131 79 50 -18.7
18,800 20 55 131 79 50 -18.8
19,000 20 55 131 79 50 -19
19,050 3/4 20 55 131 79 50 -3/4IN
19,500 20 55 131 79 50 -19.5
19,700 20 55 131 79 50 -19.7
19,800 20 55 131 79 50 -19.8
20,000 20 55 131 79 50 -20
67Walter Titex – Drilling
ORDERING INFORMATION
X·treme A3879XPL
Dcm7mm
d1h6
mmLc
mml1
mml2
mml5
mmDesignationA3879XPL…
d1
Lcl5
l1
Dc
l2
3,000 6 14 62 20 36 -3
3,100 6 14 62 20 36 -3.1
3,200 6 14 62 20 36 -3.2
3,250 6 14 62 20 36 -3.25
3,300 6 14 62 20 36 -3.3
3,400 6 14 62 20 36 -3.4
3,500 6 14 62 20 36 -3.5
3,600 6 14 62 20 36 -3.6
3,650 6 14 62 20 36 -3.65
3,700 6 14 62 20 36 -3.7
3,800 6 17 66 24 36 -3.8
3,900 6 17 66 24 36 -3.9
4,000 6 17 66 24 36 -4
4,100 6 17 66 24 36 -4.1
4,200 6 17 66 24 36 -4.2
4,300 6 17 66 24 36 -4.3
4,400 6 17 66 24 36 -4.4
4,500 6 17 66 24 36 -4.5
4,600 6 17 66 24 36 -4.6
4,650 6 17 66 24 36 -4.65
4,700 6 17 66 24 36 -4.7
4,800 6 20 66 28 36 -4.8
4,900 6 20 66 28 36 -4.9
5,000 6 20 66 28 36 -5
5,100 6 20 66 28 36 -5.1
5,200 6 20 66 28 36 -5.2
5,300 6 20 66 28 36 -5.3
5,400 6 20 66 28 36 -5.4
5,500 6 20 66 28 36 -5.5
5,550 6 20 66 28 36 -5.55
5,600 6 20 66 28 36 -5.6
5,700 6 20 66 28 36 -5.7
5,800 6 20 66 28 36 -5.8
5,900 6 20 66 28 36 -5.9
6,000 6 20 66 28 36 -6
6,100 8 24 79 34 36 -6.1
6,200 8 24 79 34 36 -6.2
6,300 8 24 79 34 36 -6.3
6,400 8 24 79 34 36 -6.4
6,500 8 24 79 34 36 -6.5
6,600 8 24 79 34 36 -6.6
6,700 8 24 79 34 36 -6.7
6,800 8 24 79 34 36 -6.8
6,900 8 24 79 34 36 -6.9
7,000 8 24 79 34 36 -7
7,100 8 29 79 41 36 -7.1
7,200 8 29 79 41 36 -7.2
7,300 8 29 79 41 36 -7.3
7,400 8 29 79 41 36 -7.4
7,500 8 29 79 41 36 -7.5
7,550 8 29 79 41 36 -7.55
7,600 8 29 79 41 36 -7.6
7,700 8 29 79 41 36 -7.7
7,800 8 29 79 41 36 -7.8
7,900 8 29 79 41 36 -7.9
8,000 8 29 79 41 36 -8
8,100 10 35 89 47 40 -8.1
ORDERING INFORMATION
68 Walter Titex – Drilling6868
X·treme A3879XPL
Dcm7mm
d1h6
mmLc
mml1
mml2
mml5
mmDesignationA3879XPL…
d1
Lcl5
l1
Dc
l2
8,200 10 35 89 47 40 -8.2
8,300 10 35 89 47 40 -8.3
8,400 10 35 89 47 40 -8.4
8,500 10 35 89 47 40 -8.5
8,600 10 35 89 47 40 -8.6
8,700 10 35 89 47 40 -8.7
8,800 10 35 89 47 40 -8.8
8,900 10 35 89 47 40 -8.9
9,000 10 35 89 47 40 -9
9,100 10 35 89 47 40 -9.1
9,200 10 35 89 47 40 -9.2
9,300 10 35 89 47 40 -9.3
9,400 10 35 89 47 40 -9.4
9,500 10 35 89 47 40 -9.5
9,550 10 35 89 47 40 -9.55
9,600 10 35 89 47 40 -9.6
9,700 10 35 89 47 40 -9.7
9,800 10 35 89 47 40 -9.8
9,900 10 35 89 47 40 -9.9
10,000 10 35 89 47 40 -10
10,100 12 40 102 55 45 -10.1
10,200 12 40 102 55 45 -10.2
10,300 12 40 102 55 45 -10.3
10,400 12 40 102 55 45 -10.4
10,500 12 40 102 55 45 -10.5
10,600 12 40 102 55 45 -10.6
10,700 12 40 102 55 45 -10.7
10,800 12 40 102 55 45 -10.8
10,900 12 40 102 55 45 -10.9
11,000 12 40 102 55 45 -11
11,100 12 40 102 55 45 -11.1
11,200 12 40 102 55 45 -11.2
11,300 12 40 102 55 45 -11.3
11,400 12 40 102 55 45 -11.4
11,500 12 40 102 55 45 -11.5
11,550 12 40 102 55 45 -11.55
11,600 12 40 102 55 45 -11.6
11,700 12 40 102 55 45 -11.7
11,800 12 40 102 55 45 -11.8
11,900 12 40 102 55 45 -11.9
12,000 12 40 102 55 45 -12
12,100 14 43 107 60 45 -12.1
12,200 14 43 107 60 45 -12.2
12,250 14 43 107 60 45 -12.25
12,300 14 43 107 60 45 -12.3
12,400 14 43 107 60 45 -12.4
12,500 14 43 107 60 45 -12.5
12,600 14 43 107 60 45 -12.6
12,700 14 43 107 60 45 -12.7
12,750 14 43 107 60 45 -12.75
12,800 14 43 107 60 45 -12.8
12,900 14 43 107 60 45 -12.9
13,000 14 43 107 60 45 -13
13,100 14 43 107 60 45 -13.1
13,200 14 43 107 60 45 -13.2
13,300 14 43 107 60 45 -13.3
13,400 14 43 107 60 45 -13.4
69Walter Titex – Drilling
ORDERING INFORMATION
X·treme A3879XPL
Dcm7mm
d1h6
mmLc
mml1
mml2
mml5
mmDesignationA3879XPL…
d1
Lcl5
l1
Dc
l2
13,500 14 43 107 60 45 -13.5
13,600 14 43 107 60 45 -13.6
13,700 14 43 107 60 45 -13.7
13,800 14 43 107 60 45 -13.8
13,900 14 43 107 60 45 -13.9
14,000 14 43 107 60 45 -14
14,100 16 45 115 65 48 -14.1
14,200 16 45 115 65 48 -14.2
14,300 16 45 115 65 48 -14.3
14,400 16 45 115 65 48 -14.4
14,500 16 45 115 65 48 -14.5
14,600 16 45 115 65 48 -14.6
14,700 16 45 115 65 48 -14.7
14,750 16 45 115 65 48 -14.75
14,800 16 45 115 65 48 -14.8
15,000 16 45 115 65 48 -15
15,100 16 45 115 65 48 -15.1
15,200 16 45 115 65 48 -15.2
15,300 16 45 115 65 48 -15.3
15,500 16 45 115 65 48 -15.5
15,600 16 45 115 65 48 -15.6
15,700 16 45 115 65 48 -15.7
15,800 16 45 115 65 48 -15.8
15,900 16 45 115 65 48 -15.9
16,000 16 45 115 65 48 -16
16,100 18 51 123 73 48 -16.1
16,200 18 51 123 73 48 -16.2
16,300 18 51 123 73 48 -16.3
16,400 18 51 123 73 48 -16.4
16,500 18 51 123 73 48 -16.5
16,600 18 51 123 73 48 -16.6
16,700 18 51 123 73 48 -16.7
16,750 18 51 123 73 48 -16.75
16,800 18 51 123 73 48 -16.8
17,000 18 51 123 73 48 -17
17,200 18 51 123 73 48 -17.2
17,300 18 51 123 73 48 -17.3
17,500 18 51 123 73 48 -17.5
17,600 18 51 123 73 48 -17.6
17,700 18 51 123 73 48 -17.7
17,800 18 51 123 73 48 -17.8
18,000 18 51 123 73 48 -18
18,200 20 55 131 79 50 -18.2
18,500 20 55 131 79 50 -18.5
18,700 20 55 131 79 50 -18.7
18,800 20 55 131 79 50 -18.8
19,000 20 55 131 79 50 -19
19,500 20 55 131 79 50 -19.5
19,700 20 55 131 79 50 -19.7
19,800 20 55 131 79 50 -19.8
20,000 20 55 131 79 50 -20
ORDERING INFORMATION
70 Walter Titex – Drilling7070
X·treme A3379XPL
Dcm7mm
Ø inches/no.
Lcmm
d1h6
mml1
mml2
mml5
mmDesignationA3379XPL…
d1
Lcl5
l1
Dc
l2
3,000 23 6 66 28 36 -3
3,100 23 6 66 28 36 -3.1
3,175 1/8 23 6 66 28 36 -1/8IN
3,200 23 6 66 28 36 -3.2
3,250 23 6 66 28 36 -3.25
3,300 23 6 66 28 36 -3.3
3,400 23 6 66 28 36 -3.4
3,500 23 6 66 28 36 -3.5
3,572 9/64 23 6 66 28 36 -9/64IN
3,600 23 6 66 28 36 -3.6
3,650 23 6 66 28 36 -3.65
3,700 23 6 66 28 36 -3.7
3,800 29 6 74 36 36 -3.8
3,900 29 6 74 36 36 -3.9
3,969 5/32 29 6 74 36 36 -5/32IN
4,000 29 6 74 36 36 -4
4,100 29 6 74 36 36 -4.1
4,200 29 6 74 36 36 -4.2
4,300 29 6 74 36 36 -4.3
4,366 11/64 29 6 74 36 36 -11/64IN
4,400 29 6 74 36 36 -4.4
4,500 29 6 74 36 36 -4.5
4,600 29 6 74 36 36 -4.6
4,650 29 6 74 36 36 -4.65
4,700 29 6 74 36 36 -4.7
4,763 3/16 35 6 82 44 36 -3/16IN
4,800 35 6 82 44 36 -4.8
4,900 35 6 82 44 36 -4.9
5,000 35 6 82 44 36 -5
5,100 35 6 82 44 36 -5.1
5,159 13/64 35 6 82 44 36 -13/64IN
5,200 35 6 82 44 36 -5.2
5,300 35 6 82 44 36 -5.3
5,400 35 6 82 44 36 -5.4
5,500 35 6 82 44 36 -5.5
5,550 35 6 82 44 36 -5.55
5,556 7/32 35 6 82 44 36 -7/32IN
5,600 35 6 82 44 36 -5.6
5,700 35 6 82 44 36 -5.7
5,800 35 6 82 44 36 -5.8
5,900 35 6 82 44 36 -5.9
5,953 15/64 35 6 82 44 36 -15/64IN
6,000 35 6 82 44 36 -6
6,100 43 8 91 53 36 -6.1
6,200 43 8 91 53 36 -6.2
6,300 43 8 91 53 36 -6.3
6,350 1/4 43 8 91 53 36 -1/4IN
6,400 43 8 91 53 36 -6.4
6,500 43 8 91 53 36 -6.5
6,600 43 8 91 53 36 -6.6
6,700 43 8 91 53 36 -6.7
6,747 17/64 43 8 91 53 36 -17/64IN
6,800 43 8 91 53 36 -6.8
6,900 43 8 91 53 36 -6.9
7,000 43 8 91 53 36 -7
7,100 43 8 91 53 36 -7.1
7,144 9/32 43 8 91 53 36 -9/32IN
71Walter Titex – Drilling
ORDERING INFORMATION
X·treme A3379XPL
Dcm7mm
Ø inches/no.
Lcmm
d1h6
mml1
mml2
mml5
mmDesignationA3379XPL…
d1
Lcl5
l1
Dc
l2
7,200 43 8 91 53 36 -7.2
7,300 43 8 91 53 36 -7.3
7,400 43 8 91 53 36 -7.4
7,500 43 8 91 53 36 -7.5
7,541 19/64 43 8 91 53 36 -19/64
7,550 43 8 91 53 36 -7.55
7,600 43 8 91 53 36 -7.6
7,700 43 8 91 53 36 -7.7
7,800 43 8 91 53 36 -7.8
7,900 43 8 91 53 36 -7.9
7,938 5/16 43 8 91 53 36 -5/16
8,000 43 8 91 53 36 -8
8,100 49 10 103 61 40 -8.1
8,200 49 10 103 61 40 -8.2
8,300 49 10 103 61 40 -8.3
8,334 21/64 49 10 103 61 40 -21/64
8,400 49 10 103 61 40 -8.4
8,500 49 10 103 61 40 -8.5
8,600 49 10 103 61 40 -8.6
8,700 49 10 103 61 40 -8.7
8,731 11/32 49 10 103 61 40 -11/32
8,800 49 10 103 61 40 -8.8
8,900 49 10 103 61 40 -8.9
9,000 49 10 103 61 40 -9
9,100 49 10 103 61 40 -9.1
9,128 23/64 49 10 103 61 40 -23/64
9,200 49 10 103 61 40 -9.2
9,300 49 10 103 61 40 -9.3
9,400 49 10 103 61 40 -9.4
9,500 49 10 103 61 40 -9.5
9,525 3/8 49 10 103 61 40 -3/8
9,550 49 10 103 61 40 -9.55
9,600 49 10 103 61 40 -9.6
9,700 49 10 103 61 40 -9.7
9,800 49 10 103 61 40 -9.8
9,900 49 10 103 61 40 -9.9
9,922 25/64 49 10 103 61 40 -25/64
10,000 49 10 103 61 40 -10
10,100 56 12 118 71 45 -10.1
10,200 56 12 118 71 45 -10.2
10,300 56 12 118 71 45 -10.3
10,319 13/32 56 12 118 71 45 -13/32
10,400 56 12 118 71 45 -10.4
10,500 56 12 118 71 45 -10.5
10,600 56 12 118 71 45 -10.6
10,700 56 12 118 71 45 -10.7
10,716 27/64 56 12 118 71 45 -27/64
10,800 56 12 118 71 45 -10.8
10,900 56 12 118 71 45 -10.9
11,000 56 12 118 71 45 -11
11,100 56 12 118 71 45 -11.1
11,113 7/16 56 12 118 71 45 -7/16
11,200 56 12 118 71 45 -11.2
11,300 56 12 118 71 45 -11.3
11,400 56 12 118 71 45 -11.4
11,500 56 12 118 71 45 -11.5
ORDERING INFORMATION
72 Walter Titex – Drilling7272
X·treme A3379XPL
Dcm7mm
Ø inches/no.
Lcmm
d1h6
mml1
mml2
mml5
mmDesignationA3379XPL…
d1
Lcl5
l1
Dc
l2
11,509 29/64 56 12 118 71 45 -29/64
11,550 56 12 118 71 45 -11.55
11,600 56 12 118 71 45 -11.6
11,700 56 12 118 71 45 -11.7
11,800 56 12 118 71 45 -11.8
11,900 56 12 118 71 45 -11.9
11,906 15/32 56 12 118 71 45 -15/32
12,000 56 12 118 71 45 -12
12,100 60 14 124 77 45 -12.1
12,200 60 14 124 77 45 -12.2
12,250 60 14 124 77 45 -12.25
12,300 60 14 124 77 45 -12.3
12,303 31/64 60 14 124 77 45 -31/64
12,400 60 14 124 77 45 -12.4
12,500 60 14 124 77 45 -12.5
12,600 60 14 124 77 45 -12.6
12,700 60 14 124 77 45 -12.7
12,700 1/2 60 14 124 77 45 -1/2
12,750 60 14 124 77 45 -12.75
12,800 60 14 124 77 45 -12.8
12,900 60 14 124 77 45 -12.9
13,000 60 14 124 77 45 -13
13,100 60 14 124 77 45 -13.1
13,200 60 14 124 77 45 -13.2
13,300 60 14 124 77 45 -13.3
13,400 60 14 124 77 45 -13.4
13,494 17/32 60 14 124 77 45 -17/32
13,500 60 14 124 77 45 -13.5
13,600 60 14 124 77 45 -13.6
13,700 60 14 124 77 45 -13.7
13,800 60 14 124 77 45 -13.8
13,900 60 14 124 77 45 -13.9
14,000 60 14 124 77 45 -14
14,100 63 16 133 83 48 -14.1
14,200 63 16 133 83 48 -14.2
14,288 9/16 63 16 133 83 48 -9/16
14,300 63 16 133 83 48 -14.3
14,400 63 16 133 83 48 -14.4
14,500 63 16 133 83 48 -14.5
14,600 63 16 133 83 48 -14.6
14,700 63 16 133 83 48 -14.7
14,750 63 16 133 83 48 -14.75
14,800 63 16 133 83 48 -14.8
15,000 63 16 133 83 48 -15
15,100 63 16 133 83 48 -15.1
15,200 63 16 133 83 48 -15.2
15,300 63 16 133 83 48 -15.3
15,500 63 16 133 83 48 -15.5
15,600 63 16 133 83 48 -15.6
15,700 63 16 133 83 48 -15.7
15,800 63 16 133 83 48 -15.8
15,875 5/8 63 16 133 83 48 -5/8
15,900 63 16 133 83 48 -15.9
16,000 63 16 133 83 48 -16
16,100 71 18 143 93 48 -16.1
16,200 71 18 143 93 48 -16.2
16,300 71 18 143 93 48 -16.3
73Walter Titex – Drilling
ORDERING INFORMATION
X·treme A3379XPL
Dcm7mm
Ø inches/no.
Lcmm
d1h6
mml1
mml2
mml5
mmDesignationA3379XPL…
d1
Lcl5
l1
Dc
l2
16,400 71 18 143 93 48 -16.4
16,500 71 18 143 93 48 -16.5
16,600 71 18 143 93 48 -16.6
16,700 71 18 143 93 48 -16.7
16,750 71 18 143 93 48 -16.75
16,800 71 18 143 93 48 -16.8
17,000 71 18 143 93 48 -17
17,200 71 18 143 93 48 -17.2
17,300 71 18 143 93 48 -17.3
17,500 71 18 143 93 48 -17.5
17,600 71 18 143 93 48 -17.6
17,700 71 18 143 93 48 -17.7
17,800 71 18 143 93 48 -17.8
18,000 71 18 143 93 48 -18
18,200 77 20 153 101 50 -18.2
18,500 77 20 153 101 50 -18.5
18,700 77 20 153 101 50 -18.7
18,800 77 20 153 101 50 -18.8
19,000 77 20 153 101 50 -19
19,050 3/4 77 20 153 101 50 -3/4
19,500 77 20 153 101 50 -19.5
19,700 77 20 153 101 50 -19.7
19,800 77 20 153 101 50 -19.8
20,000 77 20 153 101 50 -20
20,500 86 25 166 108 56 -20.5
21,000 86 25 166 108 56 -21
21,500 86 25 166 108 56 -21.5
22,000 86 25 166 108 56 -22
22,500 91 25 173 115 56 -22.5
23,000 91 25 173 115 56 -23
23,500 91 25 173 115 56 -23.5
24,000 91 25 173 115 56 -24
24,500 97 25 180 122 56 -24.5
25,000 97 25 180 122 56 -25
X·treme A3979XPL
Dcm7mm
d1h6
mmLc
mml1
mml2
mml5
mmDesignationA3979XPL…
d1
Lcl5
l1
Dc
l2
3,000 6 23 66 28 36 -3
3,100 6 23 66 28 36 -3.1
3,200 6 23 66 28 36 -3.2
3,250 6 23 66 28 36 -3.25
3,300 6 23 66 28 36 -3.3
3,400 6 23 66 28 36 -3.4
3,500 6 23 66 28 36 -3.5
3,600 6 23 66 28 36 -3.6
3,650 6 23 66 28 36 -3.65
3,700 6 23 66 28 36 -3.7
3,800 6 29 74 36 36 -3.8
3,900 6 29 74 36 36 -3.9
4,000 6 29 74 36 36 -4
4,100 6 29 74 36 36 -4.1
4,200 6 29 74 36 36 -4.2
ORDERING INFORMATION
74 Walter Titex – Drilling7474
X·treme A3979XPL
Dcm7mm
d1h6
mmLc
mml1
mml2
mml5
mmDesignationA3979XPL…
d1
Lcl5
l1
Dc
l2
4,300 6 29 74 36 36 -4.3
4,400 6 29 74 36 36 -4.4
4,500 6 29 74 36 36 -4.5
4,600 6 29 74 36 36 -4.6
4,650 6 29 74 36 36 -4.65
4,700 6 29 74 36 36 -4.7
4,800 6 35 82 44 36 -4.8
4,900 6 35 82 44 36 -4.9
5,000 6 35 82 44 36 -5
5,100 6 35 82 44 36 -5.1
5,200 6 35 82 44 36 -5.2
5,300 6 35 82 44 36 -5.3
5,400 6 35 82 44 36 -5.4
5,500 6 35 82 44 36 -5.5
5,550 6 35 82 44 36 -5.55
5,600 6 35 82 44 36 -5.6
5,700 6 35 82 44 36 -5.7
5,800 6 35 82 44 36 -5.8
5,900 6 35 82 44 36 -5.9
6,000 6 35 82 44 36 -6
6,100 8 43 91 53 36 -6.1
6,200 8 43 91 53 36 -6.2
6,300 8 43 91 53 36 -6.3
6,400 8 43 91 53 36 -6.4
6,500 8 43 91 53 36 -6.5
6,600 8 43 91 53 36 -6.6
6,700 8 43 91 53 36 -6.7
6,800 8 43 91 53 36 -6.8
6,900 8 43 91 53 36 -6.9
7,000 8 43 91 53 36 -7
7,100 8 43 91 53 36 -7.1
7,200 8 43 91 53 36 -7.2
7,300 8 43 91 53 36 -7.3
7,400 8 43 91 53 36 -7.4
7,500 8 43 91 53 36 -7.5
7,550 8 43 91 53 36 -7.55
7,600 8 43 91 53 36 -7.6
7,700 8 43 91 53 36 -7.7
7,800 8 43 91 53 36 -7.8
7,900 8 43 91 53 36 -7.9
8,000 8 43 91 53 36 -8
8,100 10 49 103 61 40 -8.1
8,200 10 49 103 61 40 -8.2
8,300 10 49 103 61 40 -8.3
8,400 10 49 103 61 40 -8.4
8,500 10 49 103 61 40 -8.5
8,600 10 49 103 61 40 -8.6
8,700 10 49 103 61 40 -8.7
8,800 10 49 103 61 40 -8.8
8,900 10 49 103 61 40 -8.9
9,000 10 49 103 61 40 -9
9,100 10 49 103 61 40 -9.1
9,200 10 49 103 61 40 -9.2
9,300 10 49 103 61 40 -9.3
9,400 10 49 103 61 40 -9.4
9,500 10 49 103 61 40 -9.5
9,550 10 49 103 61 40 -9.55
75Walter Titex – Drilling
ORDERING INFORMATION
X·treme A3979XPL
Dcm7mm
d1h6
mmLc
mml1
mml2
mml5
mmDesignationA3979XPL…
d1
Lcl5
l1
Dc
l2
9,600 10 49 103 61 40 -9.6
9,700 10 49 103 61 40 -9.7
9,800 10 49 103 61 40 -9.8
9,900 10 49 103 61 40 -9.9
10,000 10 49 103 61 40 -10
10,100 12 56 118 71 45 -10.1
10,200 12 56 118 71 45 -10.2
10,300 12 56 118 71 45 -10.3
10,400 12 56 118 71 45 -10.4
10,500 12 56 118 71 45 -10.5
10,600 12 56 118 71 45 -10.6
10,700 12 56 118 71 45 -10.7
10,800 12 56 118 71 45 -10.8
10,900 12 56 118 71 45 -10.9
11,000 12 56 118 71 45 -11
11,100 12 56 118 71 45 -11.1
11,200 12 56 118 71 45 -11.2
11,300 12 56 118 71 45 -11.3
11,400 12 56 118 71 45 -11.4
11,500 12 56 118 71 45 -11.5
11,550 12 56 118 71 45 -11.55
11,600 12 56 118 71 45 -11.6
11,700 12 56 118 71 45 -11.7
11,800 12 56 118 71 45 -11.8
11,900 12 56 118 71 45 -11.9
12,000 12 56 118 71 45 -12
12,100 14 60 124 77 45 -12.1
12,200 14 60 124 77 45 -12.2
12,250 14 60 124 77 45 -12.25
12,300 14 60 124 77 45 -12.3
12,400 14 60 124 77 45 -12.4
12,500 14 60 124 77 45 -12.5
12,600 14 60 124 77 45 -12.6
12,700 14 60 124 77 45 -12.7
12,750 14 60 124 77 45 -12.75
12,800 14 60 124 77 45 -12.8
12,900 14 60 124 77 45 -12.9
13,000 14 60 124 77 45 -13
13,100 14 60 124 77 45 -13.1
13,200 14 60 124 77 45 -13.2
13,300 14 60 124 77 45 -13.3
13,400 14 60 124 77 45 -13.4
13,500 14 60 124 77 45 -13.5
13,600 14 60 124 77 45 -13.6
13,700 14 60 124 77 45 -13.7
13,800 14 60 124 77 45 -13.8
13,900 14 60 124 77 45 -13.9
14,000 14 60 124 77 45 -14
14,100 16 63 133 83 48 -14.1
14,200 16 63 133 83 48 -14.2
14,300 16 63 133 83 48 -14.3
14,400 16 63 133 83 48 -14.4
14,500 16 63 133 83 48 -14.5
14,600 16 63 133 83 48 -14.6
14,700 16 63 133 83 48 -14.7
14,750 16 63 133 83 48 -14.75
14,800 16 63 133 83 48 -14.8
ORDERING INFORMATION
76 Walter Titex – Drilling76
X·treme A3979XPL
Dcm7mm
d1h6
mmLc
mml1
mml2
mml5
mmDesignationA3979XPL…
d1
Lcl5
l1
Dc
l2
15,000 16 63 133 83 48 -15
15,100 16 63 133 83 48 -15.1
15,200 16 63 133 83 48 -15.2
15,300 16 63 133 83 48 -15.3
15,500 16 63 133 83 48 -15.5
15,600 16 63 133 83 48 -15.6
15,700 16 63 133 83 48 -15.7
15,800 16 63 133 83 48 -15.8
15,900 16 63 133 83 48 -15.9
16,000 16 63 133 83 48 -16
16,100 18 71 143 93 48 -16.1
16,200 18 71 143 93 48 -16.2
16,300 18 71 143 93 48 -16.3
16,400 18 71 143 93 48 -16.4
16,500 18 71 143 93 48 -16.5
16,600 18 71 143 93 48 -16.6
16,700 18 71 143 93 48 -16.7
16,750 18 71 143 93 48 -16.75
16,800 18 71 143 93 48 -16.8
17,000 18 71 143 93 48 -17
17,200 18 71 143 93 48 -17.2
17,300 18 71 143 93 48 -17.3
17,500 18 71 143 93 48 -17.5
17,600 18 71 143 93 48 -17.6
17,700 18 71 143 93 48 -17.7
17,800 18 71 143 93 48 -17.8
18,000 18 71 143 93 48 -18
18,200 20 77 153 101 50 -18.2
18,500 20 77 153 101 50 -18.5
18,700 20 77 153 101 50 -18.7
18,800 20 77 153 101 50 -18.8
19,000 20 77 153 101 50 -19
19,500 20 77 153 101 50 -19.5
19,700 20 77 153 101 50 -19.7
19,800 20 77 153 101 50 -19.8
20,000 20 77 153 101 50 -20
20,500 25 86 166 108 56 -20.5
21,000 25 86 166 108 56 -21
21,500 25 86 166 108 56 -21.5
22,000 25 86 166 108 56 -22
22,500 25 91 173 115 56 -22.5
23,000 25 91 173 115 56 -23
23,500 25 91 173 115 56 -23.5
24,000 25 91 173 115 56 -24
24,500 25 97 180 122 56 -24.5
25,000 25 97 180 122 56 -25
77Walter Titex – Drilling
ORDERING INFORMATION
X·treme A3299XPL
Dcm7mm
Ø inches / no.
d1h6
mmLc
mml1
mml2
mml5
mmDesignationA3299XPL…
d1
Lcl5
l1
Dc
l2
3,000 6 14 62 20 36 -3
3,100 6 14 62 20 36 -3.1
3,175 1/8 6 14 62 20 36 -1/8IN
3,200 6 14 62 20 36 -3.2
3,250 6 14 62 20 36 -3.25
3,300 6 14 62 20 36 -3.3
3,400 6 14 62 20 36 -3.4
3,500 6 14 62 20 36 -3.5
3,572 9/64 6 14 62 20 36 -9/64IN
3,600 6 14 62 20 36 -3.6
3,650 6 14 62 20 36 -3.65
3,700 6 14 62 20 36 -3.7
3,800 6 17 66 24 36 -3.8
3,900 6 17 66 24 36 -3.9
3,969 5/32 6 17 66 24 36 -5/32IN
4,000 6 17 66 24 36 -4
4,100 6 17 66 24 36 -4.1
4,200 6 17 66 24 36 -4.2
4,300 6 17 66 24 36 -4.3
4,366 11/64 6 17 66 24 36 -11/64IN
4,400 6 17 66 24 36 -4.4
4,500 6 17 66 24 36 -4.5
4,600 6 17 66 24 36 -4.6
4,650 6 17 66 24 36 -4.65
4,700 6 17 66 24 36 -4.7
4,763 3/16 6 20 66 28 36 -3/16IN
4,800 6 20 66 28 36 -4.8
4,900 6 20 66 28 36 -4.9
5,000 6 20 66 28 36 -5
5,100 6 20 66 28 36 -5.1
5,159 13/64 6 20 66 28 36 -13/64IN
5,200 6 20 66 28 36 -5.2
5,300 6 20 66 28 36 -5.3
5,400 6 20 66 28 36 -5.4
5,500 6 20 66 28 36 -5.5
5,550 6 20 66 28 36 -5.55
5,556 7/32 6 20 66 28 36 -7/32IN
5,600 6 20 66 28 36 -5.6
5,700 6 20 66 28 36 -5.7
5,800 6 20 66 28 36 -5.8
5,900 6 20 66 28 36 -5.9
5,953 15/64 6 20 66 28 36 -15/64IN
6,000 6 20 66 28 36 -6
6,100 8 24 79 34 36 -6.1
6,200 8 24 79 34 36 -6.2
6,300 8 24 79 34 36 -6.3
6,350 1/4 8 24 79 34 36 - 1/4IN
6,400 8 24 79 34 36 -6.4
6,500 8 24 79 34 36 -6.5
6,600 8 24 79 34 36 -6.6
6,700 8 24 79 34 36 -6.7
6,747 17/64 8 24 79 34 36 -17/64IN
6,800 8 24 79 34 36 -6.8
6,900 8 24 79 34 36 -6.9
7,000 8 24 79 34 36 -7
7,100 8 29 79 41 36 -7.1
7,144 9/32 8 29 79 41 36 -9/32IN
ORDERING INFORMATION
78 Walter Titex – Drilling78
X·treme A3299XPL
Dcm7mm
Ø inches / no.
d1h6
mmLc
mml1
mml2
mml5
mmDesignationA3299XPL…
d1
Lcl5
l1
Dc
l2
7,200 8 29 79 41 36 -7.2
7,300 8 29 79 41 36 -7.3
7,400 8 29 79 41 36 -7.4
7,500 8 29 79 41 36 -7.5
7,541 19/64 8 29 79 41 36 -19/64IN
7,550 8 29 79 41 36 -7.55
7,600 8 29 79 41 36 -7.6
7,700 8 29 79 41 36 -7.7
7,800 8 29 79 41 36 -7.8
7,900 8 29 79 41 36 -7.9
7,938 5/16 8 29 79 41 36 -5/16IN
8,000 8 29 79 41 36 -8
8,100 10 35 89 47 40 -8.1
8,200 10 35 89 47 40 -8.2
8,300 10 35 89 47 40 -8.3
8,334 21/64 10 35 89 47 40 -21/64IN
8,400 10 35 89 47 40 -8.4
8,500 10 35 89 47 40 -8.5
8,600 10 35 89 47 40 -8.6
8,700 10 35 89 47 40 -8.7
8,731 11/32 10 35 89 47 40 -11/32IN
8,800 10 35 89 47 40 -8.8
8,900 10 35 89 47 40 -8.9
9,000 10 35 89 47 40 -9
9,100 10 35 89 47 40 -9.1
9,128 23/64 10 35 89 47 40 -23/64IN
9,200 10 35 89 47 40 -9.2
9,300 10 35 89 47 40 -9.3
9,400 10 35 89 47 40 -9.4
9,500 10 35 89 47 40 -9.5
9,525 3/8 10 35 89 47 40 -3/8IN
9,550 10 35 89 47 40 -9.55
9,600 10 35 89 47 40 -9.6
9,700 10 35 89 47 40 -9.7
9,800 10 35 89 47 40 -9.8
9,900 10 35 89 47 40 -9.9
9,922 25/64 10 35 89 47 40 -25/64IN
10,000 10 35 89 47 40 -10
10,100 12 40 102 55 45 -10.1
10,200 12 40 102 55 45 -10.2
10,300 12 40 102 55 45 -10.3
10,319 13/32 12 40 102 55 45 -13/32IN
10,400 12 40 102 55 45 -10.4
10,500 12 40 102 55 45 -10.5
10,600 12 40 102 55 45 -10.6
10,700 12 40 102 55 45 -10.7
10,716 27/64 12 40 102 55 45 -27/64IN
10,800 12 40 102 55 45 -10.8
10,900 12 40 102 55 45 -10.9
11,000 12 40 102 55 45 -11
11,100 12 40 102 55 45 -11.1
11,113 7/16 12 40 102 55 45 -7/16IN
11,200 12 40 102 55 45 -11.2
11,300 12 40 102 55 45 -11.2
11,400 12 40 102 55 45 -11.4
11,500 12 40 102 55 45 -11.5
11,509 29/64 12 40 102 55 45 -29/64IN
79Walter Titex – Drilling
ORDERING INFORMATION
X·treme A3299XPL
Dcm7mm
Ø inches / no.
d1h6
mmLc
mml1
mml2
mml5
mmDesignationA3299XPL…
d1
Lcl5
l1
Dc
l2
11,550 12 40 102 55 45 -11.55
11,600 12 40 102 55 45 -11.6
11,700 12 40 102 55 45 -11.7
11,800 12 40 102 55 45 -11.8
11,900 12 40 102 55 45 -11.9
11,906 15/32 12 40 102 55 45 -15/32IN
12,000 12 40 102 55 45 -12
12,100 14 43 107 60 45 -12.1
12,200 14 43 107 60 45 -12.2
12,250 14 43 107 60 45 -12.25
12,300 14 43 107 60 45 -12.3
12,303 31/64 14 43 107 60 45 -31/64IN
12,400 14 43 107 60 45 -12.4
12,500 14 43 107 60 45 -12.5
12,600 14 43 107 60 45 -12.6
12,700 14 43 107 60 45 -12.7
12,700 1/2 14 43 107 60 45 -1/2IN
12,750 14 43 107 60 45 -12.75
12,800 14 43 107 60 45 -12.8
12,900 14 43 107 60 45 -12.9
13,000 14 43 107 60 45 -13
13,100 14 43 107 60 45 -13.1
13,200 14 43 107 60 45 -13.2
13,300 14 43 107 60 45 -13.3
13,400 14 43 107 60 45 -13.4
13,494 17/32 14 43 107 60 45 -17/32IN
13,500 14 43 107 60 45 -13.5
13,600 14 43 107 60 45 -13.6
13,700 14 43 107 60 45 -13.7
13,800 14 43 107 60 45 -13.8
13,900 14 43 107 60 45 -13.9
14,000 14 43 107 60 45 -14
14,100 16 45 115 65 48 -14.1
14,200 16 45 115 65 48 -14.2
14,288 9/16 16 45 115 65 48 -9/16IN
14,300 16 45 115 65 48 -14.3
14,400 16 45 115 65 48 -14.4
14,500 16 45 115 65 48 -14.5
14,600 16 45 115 65 48 -14.6
14,700 16 45 115 65 48 -14.7
14,750 16 45 115 65 48 -14.75
14,800 16 45 115 65 48 -14.8
15,000 16 45 115 65 48 -15
15,100 16 45 115 65 48 -15.1
15,200 16 45 115 65 48 -15.2
15,300 16 45 115 65 48 -15.3
15,500 16 45 115 65 48 -15.5
15,600 16 45 115 65 48 -15.6
15,700 16 45 115 65 48 -15.7
15,800 16 45 115 65 48 -15.8
15,875 5/8 16 45 115 65 48 -5/8IN
15,900 16 45 115 65 48 -15.9
16,000 16 45 115 65 48 -16
16,100 18 51 123 73 48 -16.1
16,200 18 51 123 73 48 -16.2
16,300 18 51 123 73 48 -16.3
16,400 18 51 123 73 48 -16.4
ORDERING INFORMATION
80 Walter Titex – Drilling80
X·treme A3299XPL
Dcm7mm
Ø inches / no.
d1h6
mmLc
mml1
mml2
mml5
mmDesignationA3299XPL…
d1
Lcl5
l1
Dc
l2
16,500 18 51 123 73 48 -16.5
16,600 18 51 123 73 48 -16.6
16,700 18 51 123 73 48 -16.7
16,750 18 51 123 73 48 -16.75
16,800 18 51 123 73 48 -16.8
17,000 18 51 123 73 48 -17
17,200 18 51 123 73 48 -17.2
17,300 18 51 123 73 48 -17.3
17,500 18 51 123 73 48 -17.5
17,600 18 51 123 73 48 -17.6
17,700 18 51 123 73 48 -17.7
17,800 18 51 123 73 48 -17.8
18,000 18 51 123 73 48 -18
18,200 20 55 131 79 50 -18.2
18,500 20 55 131 79 50 -18.5
18,700 20 55 131 79 50 -18.7
18,800 20 55 131 79 50 -18.8
19,000 20 55 131 79 50 -19
19,050 3/4 20 55 131 79 50 -3/4IN
19,500 20 55 131 79 50 -19.5
19,700 20 55 131 79 50 -19.7
19,800 20 55 131 79 50 -19.8
20,000 20 55 131 79 50 -20
X·treme A3899XPL
Dcm7mm
d1h6
mmLc
mml1
mml2
mml5
mmDesignationA3899XPL…
d1
Lcl5
l1
Dc
l2
3,000 6 14 62 20 36 -3
3,100 6 14 62 20 36 -3.1
3,200 6 14 62 20 36 -3.2
3,250 6 14 62 20 36 -3.25
3,300 6 14 62 20 36 -3.3
3,400 6 14 62 20 36 -3.4
3,500 6 14 62 20 36 -3.5
3,600 6 14 62 20 36 -3.6
3,650 6 14 62 20 36 -3.65
3,700 6 14 62 20 36 -3.7
3,800 6 17 66 24 36 -3.8
3,900 6 17 66 24 36 -3.9
4,000 6 17 66 24 36 -4
4,100 6 17 66 24 36 -4.1
4,200 6 17 66 24 36 -4.2
4,300 6 17 66 24 36 -4.3
4,400 6 17 66 24 36 -4.4
4,500 6 17 66 24 36 -4.5
4,600 6 17 66 24 36 -4.6
4,650 6 17 66 24 36 -4.65
4,700 6 17 66 24 36 -4.7
4,800 6 20 66 28 36 -4.8
4,900 6 20 66 28 36 -4.9
5,000 6 20 66 28 36 -5
5,100 6 20 66 28 36 -5.1
5,200 6 20 66 28 36 -5.2
81Walter Titex – Drilling
ORDERING INFORMATION
X·treme A3899XPL
Dcm7mm
d1h6
mmLc
mml1
mml2
mml5
mmDesignationA3899XPL…
d1
Lcl5
l1
Dc
l2
5,300 6 20 66 28 36 -5.3
5,400 6 20 66 28 36 -5.4
5,500 6 20 66 28 36 -5.5
5,550 6 20 66 28 36 -5.55
5,600 6 20 66 28 36 -5.6
5,700 6 20 66 28 36 -5.7
5,800 6 20 66 28 36 -5.8
5,900 6 20 66 28 36 -5.9
6,000 6 20 66 28 36 -6
6,100 8 24 79 34 36 -6.1
6,200 8 24 79 34 36 -6.2
6,300 8 24 79 34 36 -6.3
6,400 8 24 79 34 36 -6.4
6,500 8 24 79 34 36 -6.5
6,600 8 24 79 34 36 -6.6
6,700 8 24 79 34 36 -6.7
6,800 8 24 79 34 36 -6.8
6,900 8 24 79 34 36 -6.9
7,000 8 24 79 34 36 -7
7,100 8 29 79 41 36 -7.1
7,200 8 29 79 41 36 -7.2
7,300 8 29 79 41 36 -7.3
7,400 8 29 79 41 36 -7.4
7,500 8 29 79 41 36 -7.5
7,550 8 29 79 41 36 -7.55
7,600 8 29 79 41 36 -7.6
7,700 8 29 79 41 36 -7.7
7,800 8 29 79 41 36 -7.8
7,900 8 29 79 41 36 -7.9
8,000 8 29 79 41 36 -8
8,100 10 35 89 47 40 -8.1
8,200 10 35 89 47 40 -8.2
8,300 10 35 89 47 40 -8.3
8,400 10 35 89 47 40 -8.4
8,500 10 35 89 47 40 -8.5
8,600 10 35 89 47 40 -8.6
8,700 10 35 89 47 40 -8.7
8,800 10 35 89 47 40 -8.8
8,900 10 35 89 47 40 -8.9
9,000 10 35 89 47 40 -9
9,100 10 35 89 47 40 -9.1
9,200 10 35 89 47 40 -9.2
9,300 10 35 89 47 40 -9.3
9,400 10 35 89 47 40 -9.4
9,500 10 35 89 47 40 -9.5
9,550 10 35 89 47 40 -9.55
9,600 10 35 89 47 40 -9.6
9,700 10 35 89 47 40 -9.7
9,800 10 35 89 47 40 -9.8
9,900 10 35 89 47 40 -9.9
10,000 10 35 89 47 40 -10
10,100 12 40 102 55 45 -10.1
10,200 12 40 102 55 45 -10.2
10,300 12 40 102 55 45 -10.3
10,400 12 40 102 55 45 -10.4
10,500 12 40 102 55 45 -10.5
10,600 12 40 102 55 45 -10.6
ORDERING INFORMATION
82 Walter Titex – Drilling82
X·treme A3899XPL
Dcm7mm
d1h6
mmLc
mml1
mml2
mml5
mmDesignationA3899XPL…
d1
Lcl5
l1
Dc
l2
10,700 12 40 102 55 45 -10.7
10,800 12 40 102 55 45 -10.8
10,900 12 40 102 55 45 -10.9
11,000 12 40 102 55 45 -11
11,100 12 40 102 55 45 -11.1
11,200 12 40 102 55 45 -11.2
11,300 12 40 102 55 45 -11.3
11,400 12 40 102 55 45 -11.4
11,500 12 40 102 55 45 -11.5
11,550 12 40 102 55 45 -11.55
11,600 12 40 102 55 45 -11.6
11,700 12 40 102 55 45 -11.7
11,800 12 40 102 55 45 -11.8
11,900 12 40 102 55 45 -11.9
12,000 12 40 102 55 45 -12
12,100 14 43 107 60 45 -12.1
12,200 14 43 107 60 45 -12.2
12,250 14 43 107 60 45 -12.25
12,300 14 43 107 60 45 -12.3
12,400 14 43 107 60 45 -12.4
12,500 14 43 107 60 45 -12.5
12,600 14 43 107 60 45 -12.6
12,700 14 43 107 60 45 -12.7
12,750 14 43 107 60 45 -12.75
12,800 14 43 107 60 45 -12.8
12,900 14 43 107 60 45 -12.9
13,000 14 43 107 60 45 -13
13,100 14 43 107 60 45 -13.1
13,200 14 43 107 60 45 -13.2
13,300 14 43 107 60 45 -13.3
13,400 14 43 107 60 45 -13.4
13,500 14 43 107 60 45 -13.5
13,600 14 43 107 60 45 -13.6
13,700 14 43 107 60 45 -13.7
13,800 14 43 107 60 45 -13.8
13,900 14 43 107 60 45 -13.9
14,000 14 43 107 60 45 -14
14,100 16 45 115 65 48 -14.1
14,200 16 45 115 65 48 -14.2
14,300 16 45 115 65 48 -14.3
14,400 16 45 115 65 48 -14.4
14,500 16 45 115 65 48 -14.5
14,600 16 45 115 65 48 -14.6
14,700 16 45 115 65 48 -14.7
14,750 16 45 115 65 48 -14.75
14,800 16 45 115 65 48 -14.8
15,000 16 45 115 65 48 -15
15,100 16 45 115 65 48 -15.1
15,200 16 45 115 65 48 -15.2
15,300 16 45 115 65 48 -15.3
15,500 16 45 115 65 48 -15.5
15,600 16 45 115 65 48 -15.6
83Walter Titex – Drilling
ORDERING INFORMATION
X·treme A3899XPL
Dcm7mm
d1h6
mmLc
mml1
mml2
mml5
mmDesignationA3899XPL…
15,700 16 45 115 65 48 -15.7
15,800 16 45 115 65 48 -15.8
15,900 16 45 115 65 48 -15.9
16,000 16 45 115 65 48 -16
16,100 18 51 123 73 48 -16.1
d1
Lcl5
l1
Dc
l2
16,200 18 51 123 73 48 -16.2
16,300 18 51 123 73 48 -16.3
16,400 18 51 123 73 48 -16.4
16,500 18 51 123 73 48 -16.5
16,600 18 51 123 73 48 -16.6
16,700 18 51 123 73 48 -16.7
16,750 18 51 123 73 48 -16.75
16,800 18 51 123 73 48 -16.8
17,000 18 51 123 73 48 -17
17,200 18 51 123 73 48 -17.2
17,300 18 51 123 73 48 -17.3
17,500 18 51 123 73 48 -17.5
17,600 18 51 123 73 48 -17.6
17,700 18 51 123 73 48 -17.7
17,800 18 51 123 73 48 -17.8
18,000 18 51 123 73 48 -18
18,200 20 55 131 79 50 -18.2
18,500 20 55 131 79 50 -18.5
18,700 20 55 131 79 50 -18.7
18,800 20 55 131 79 50 -18.8
19,000 20 55 131 79 50 -19
19,500 20 55 131 79 50 -19.5
19,700 20 55 131 79 50 -19.7
19,800 20 55 131 79 50 -19.8
20,000 20 55 131 79 50 -20
ORDERING INFORMATION
84 Walter Titex – Drilling84
X·treme DM8 A6489AMP
Dcm7mm
Ø inches/no.
d1h6
mmLc
mml1
mml2
mml5
mmDesignationA6489AMP…
d1
Lc
l5l1
Dc
l2
2,000 3 20 63 23 35 -2
2,050 3 20 63 24 35 -2.05
2,100 3 20 63 24 35 -2.1
2,150 3 21 63 25 34 -2.15
2,200 3 21 63 25 34 -2.2
2,250 3 22 67 26 37 -2.25
2,300 3 22 67 26 37 -2.30
2,350 3 24 67 28 35 -2.35
2,381 3/32 3 24 67 28 35 -3/32IN
2,400 3 24 67 28 35 -2.4
2,450 3 25 67 29 34 -2.45
2,500 3 25 67 29 34 -2.5
2,550 3 26 71 30 37 -2.55
2,600 3 26 71 30 37 -2.6
2,650 3 26 71 31 37 -2.65
2,700 3 26 71 31 37 -2.7
2,750 3 27 71 32 36 -2.75
2,778 7/64 3 27 71 32 36 -7/64IN
2,800 3 27 71 32 36 -2.8
2,850 3 28 71 33 35 -2.85
2,900 3 28 71 33 35 -2.9
2,950 3 29 71 34 34 -2,95
X·treme M A3389AML
Dcm7mm
Ø inches/no.
d1h6
mmLc
mml1
mml2
mml5
mmDesignationA3389AML…
d1
Lc
l5l1
Dc
l2
2,000 3 14 57 17 35 -2
2,050 3 14 57 18 35 -2.05
2,100 3 14 57 18 35 -2.1
2,150 3 15 57 19 34 -2.15
2,200 3 15 57 19 34 -2.2
2,250 3 16 59 20 35 -2.25
2,300 3 16 59 20 35 -2.30
2,350 3 16 59 20 35 -2.35
2,381 3/32 3 16 59 20 35 -3/32IN
2,400 3 16 59 20 35 -2.4
2,450 3 17 59 21 34 -2.45
2,500 3 17 59 21 34 -2.5
2,550 3 18 62 22 36 -2.55
2,600 3 18 62 22 36 -2.6
2,650 3 18 62 23 36 -2.65
2,700 3 18 62 23 36 -2.7
2,750 3 19 62 24 35 2.75
2,778 7/64 3 19 62 24 35 -7/64IN
2,800 3 19 62 24 35 -2.8
2,850 3 20 62 25 34 -2.85
2,900 3 20 62 25 34 -2.9
2,950 3 20 62 25 34 -2.95
85Walter Titex – Drilling
ORDERING INFORMATION
X·treme DM12 A6589AMP
Dch7
mmØ
inches/no.
d1h6
mmLc
mml1
mml2
mml5
mmDesignationA6589AMP…
d1
Lc
l5l1
Dc
l2
2,000 3 28 72 31 36 -2
2,100 3 29 72 33 35 -2.1
2,200 3 30 72 34 34 -2.2
2,300 3 32 77 36 37 -2.3
2,381 3/32 3 33 77 37 36 -3/32IN
2,400 3 33 77 37 36 -2.4
2,500 3 35 77 39 34 -2.5
2,600 3 36 83 40 39 -2.6
2,700 3 37 83 42 38 -2.7
2,778 7/64 3 38 83 43 37 -7/64IN
2,800 3 38 83 43 37 -2.8
2,900 3 40 83 45 35 -2.9
Solid carbide centre drill K1161XPL
Dck12mm
d1h9
mml1
mmDesignationK1161XPL...
d1
l1
Dc 0,5 3,15 25 -0.5
0,8 3,15 25 -0.8
1 3,15 31,5 -1
1,25 3,15 31,5 -1.25
1,6 4 31,5 -1.6
2 5 40 -2
2,5 6,3 45 -2.5
3,15 8 50 -3.15
4 10 56 -4
5 12,5 63 -5
6,3 16 71 -6.3
NEW2012
ORDERING INFORMATION
86
HM-NC machine reaming tools F2171
Dcmm
d1h6
mmLc
mml1
mml5
mmDesignation
F2171…
d1
Lcl1
Dc
l5
2 4 12 49 28 -2
2,5 4 16 59 28 -2.5
3 4 17 62,5 28 -3
3,2 4 18 65 28 -3.2
3,5 4 18 70 28 -3.5
4 4 19 75 28 -4
4,5 6 21 80 36 -4.5
5 6 23 86 36 -5
5,5 6 26 93 36 -5.5
6 6 26 93 36 -6
6,5 6 28 101 36 -6.5
7 8 31 109 36 -7
7,5 8 31 109 36 -7.5
8 8 33 117 36 -8
8,5 8 33 117 36 -8.5
9 10 36 125 40 -9
10 10 38 133 40 -10
11 12 41 142 45 -11
12 12 44 151 45 -12
13 12 44 151 45 -13
14 16 47 160 48 -14
15 16 50 162 48 -15
16 16 52 170 48 -16
18 18 52 182 48 -18
20 20 52 195 50 -20
HM-NC machine reaming tools F2162
Dcmm
d1h6
mmLc
mml1
mml5
mmDesignation
F2162…
d1
Lcl1
l5
Dc4 4 19 75 28 -4
4,5 6 21 80 36 -4.5
5 6 23 86 36 -5
5,5 6 26 93 36 -5.5
6 6 26 93 36 -6
6,5 6 28 101 36 -6.5
7 8 31 109 36 -7
7,5 8 31 109 36 -7.5
8 8 33 117 36 -8
8,5 8 33 117 36 -8.5
9 10 36 125 40 -9
9,5 10 36 125 40 -9,5
10 10 38 133 40 -10
11 12 41 142 45 -11
12 12 44 151 45 -12
13 12 44 151 45 -13
14 16 47 160 48 -14
15 16 50 162 48 -15
16 16 52 170 48 -16
17 18 52 175 48 -17
18 18 52 182 48 -18
20 20 52 195 50 -20
NEW2012
NEW2012
ORDERING INFORMATION
88 Walter Titex – Drilling
Mat
eria
l gro
up
Solid carbide drills 3 x Dc Solid carbide drills 5 x Dc Pilot drills Centring drills Reaming tools
Designation K3299XPLK3899XPL K3879XPL A3393TTP K3281TFT K1161XPL F2162 F2171
Type X·treme Step 90 X·treme Step 90 X·treme Inox X·treme Pilot Step 90 - straight-fluted Left-hand spiralDimensions Walter standard Walter standard DIN 6537 L Walter standard DIN 333 - form A Walter standard Walter standard
Ø range (mm) 3,30 – 14,00 3,30 – 14,50 3,00 – 20,00 3,00 – 16,00 0,50 – 6,30 2,00 – 20,00 2,00 – 20,00Cutting tool material K30F K30F K30F K30F K10/20 K10 K10
Coating XPL XPL TPP TFT XPL blank blankPage ¤58¤ ¤58¤ ¤60¤ ¤59¤ ¤85¤ ¤86¤ ¤86¤
Structure of main material groups and identification letters
Brin
ell h
ardn
ess
HB
Tens
ile s
tren
gth
R mN
/mm
2
Mac
hini
ng g
roup
1
Workpiece materialvc VRR vc VRR vc VRR vc VRR vc VRR vc VRR vc VRR
P
Non-alloyed steel
C ≤ 0.25% annealed 125 428 P1 140 12 E O M L 110 12 E O M L 150 10 E O M L 120 12 E O M L 72 6 E O M L 24 8 E O 24 8 E OC > 0.25... ≤ 0.55% annealed 190 639 P2 140 12 E O M L 120 12 E O M L 110 10 E O M L 105 12 E O M L 68 6 E O M L 22 8 E O 22 8 E OC > 0.25... ≤ 0.55% heat treated 210 708 P3 130 12 E O M L 110 12 E O M L 100 10 E O M L 100 12 E O M L 63 6 E O M L 21 8 E O 21 8 E OC > 0.55% annealed 190 639 P4 140 12 E O M L 120 12 E O M L 110 10 E O M L 105 12 E O M L 68 6 E O M L 22 8 E O 22 8 E OC > 0.55% heat treated 300 1013 P5 105 10 E O M L 95 10 E O M L 75 9 E O M L 48 5 E O M L 16 8 E O 16 8 E OMachining steel (short-chipping) annealed 220 745 P6 150 12 E O M L 110 12 E O M L 135 12 E O M L 120 12 E O M L 72 6 E O M L 24 8 E O 24 8 E O
Low-alloyed steel
annealed 175 591 P7 140 12 E O M L 120 12 E O M L 110 10 E O M L 105 12 E O M L 68 6 E O M L 22 8 E O 22 8 E Oheat treated 300 1013 P8 105 10 E O M L 95 10 E O M L 75 9 E O M L 48 5 E O M L 16 8 E O 16 8 E Oheat treated 380 1282 P9 80 7 O E 63 7 O E 50 6 O E M L 32 3 O E 10 8 O E 10 8 O Eheat treated 430 1477 P10 63 5 O E 48 5 O E 42 4 O E 24 2 O E 6 8 O E 6 8 O E
High-alloyed steel and High-alloyed tool steel
annealed 200 675 P11 71 9 E O 63 9 E O 67 9 E O 42 4 E O 14 8 E O 14 8 E Ohardened and tempered 300 1013 P12 95 9 E O 80 9 E O 60 7 E O M L 38 4 E O 12 8 E O 12 8 E Ohardened and tempered 400 1361 P13 63 5 O E 48 5 O E 42 4 O E 24 2 O E 8 8 O E 8 8 O E
Stainless steelferritic/martensitic, annealed 200 675 P14 71 9 E O 63 9 E O 90 9 E O 67 9 E O 42 4 E O 14 8 E O 14 8 E Omartensitic, heat treated 330 1114 P15 40 8 E O 40 7 E O 50 8 E O 42 7 E O 32 3 E O 10 8 E O 10 8 E O
M Stainless steelaustenitic, quench hardened 200 675 M1 50 6 E O 50 6 E O 42 5 E O 8 8 8 8austenitic, precipitation hardened (PH) 300 1013 M2 45 6 E O 53 6 E O 65 6 E O 56 6 E O 21 3 E O 12 8 12 8austenitic/ferritic, duplex 230 778 M3 34 5 E O 50 6 E O 34 5 E O 6 8 6 8
K
Malleable cast ironferritic 200 675 K1 100 16 E O M L 90 16 E O M L 100 16 E O M L 72 8 E O M L 20 8 E O 20 8 E Opearlitic 260 867 K2 63 10 E O M L 90 16 E O M L 75 16 E O M L 58 7 E O M L 16 8 E O 16 8 E O
Grey cast ironlow tensile strength 180 602 K3 125 16 E O M L 110 16 E O M L 120 16 E O M L 86 8 E O M L 24 8 E O 24 8 E Ohigh tensile strength/austenitic 245 825 K4 105 16 E O M L 95 16 E O M L 100 16 E O M L 72 8 E O M L 20 8 E O 20 8 E O
Cast iron with spheroidal graphiteferritic 155 518 K5 130 16 E O M L 110 16 E O M L 95 20 E M L 72 8 E O M L 20 8 E O 20 8 E Opearlitic 265 885 K6 95 16 E O M L 90 16 E O M L 75 16 E O M L 58 7 E O M L 16 8 E O 16 8 E O
GGV (CGI) 200 675 K7 110 16 E O M L 100 16 E O M L 85 20 O E M L 65 8 E O M L 18 8 E O 18 8 E O
N
Aluminium wrought alloysnot precipitation hardenable 30 – N1 400 16 E O M 260 10 E O 450 16 E O M 400 16 E O M 130 5 E O 63 10 E O 63 10 E Oprecipitation hardenable, precipitation hardened 100 343 N2 400 16 E O M 260 10 E O 450 16 E O M 400 16 E O M 130 5 E O 63 10 E O 63 10 E O
Cast aluminium alloys≤ 12% Si, not precipitation hardenable 75 260 N3 250 16 E O M 240 16 E O 250 16 E O M 250 16 E O M 105 7 E O 50 10 E O 50 10 E O≤ 12% Si, precipitation hardenable, precipitation hardened 90 314 N4 240 16 E O M 210 16 E O 240 16 E O M 240 16 E O M 90 7 E O 45 10 E O 45 10 E O> 12% Si, not precipitation hardenable 130 447 N5 190 16 E O M 170 12 E O 190 16 E O M 190 16 E O M 71 7 E O 36 10 E O 36 10 E O
Magnesium alloys 70 250 N6 240 16 M L 240 16 M L 240 16 M L 90 7 M L 45 10 O 45 10 O
Copper and copper alloys (bronze/brass)
non-alloyed, electrolytic copper 100 343 N7 190 8 E O M 200 7 E O M 210 9 E O M 210 9 E O M 90 3 E O M 45 10 E O 45 10 E Obrass, bronze, red brass 90 314 N8 160 10 E O 170 12 E O 180 12 E O 180 12 E O 75 6 E O 36 10 E O 36 10 E OCu-alloys, short-chipping 110 382 N9 190 16 E O M 190 16 E O M L 190 16 E O M 190 16 E O M 80 8 E O M L 40 10 E O 40 10 E Ohigh-strength, Ampco 300 1013 N10 60 5 E O 67 5 E O 60 7 E O 60 7 E O M 48 5 E O 12 10 E O 12 10 E O
S
Heat-resistant alloys
Fe-basedannealed 200 675 S1 50 6 E O 48 6 E O 42 5 E O 33 2 O E 12 8 E O 12 8 E Oprecipitation hardened 280 943 S2 30 5 O E 36 5 O E 26 4 O E 15 2 O E 10 8 E O 10 8 E O
Ni or Co baseannealed 250 839 S3 34 5 E O 40 5 E O 32 4 E O 27 2 O E 10 8 E O 10 8 E Oprecipitation hardened 350 1177 S4 19 4 O E 24 4 O E 16 3 O E 10 1 O E 6 8 E O 6 8 E Ocast 320 1076 S5 26 4 O E 30 4 O E 20 3 O E 12 1 O E 6 8 E O 6 8 E O
Titanium alloyspure titanium 200 675 S6 56 6 O E 42 5 O E 60 6 O E 56 6 O E 10 8 E O 10 8 E O+α and β alloys, precipitation hardened 375 1262 S7 50 5 O E 36 4 O E 53 5 O E 48 5 O E 8 8 E O 8 8 E Oβ alloys 410 1396 S8 12,5 4 O E 18 4 O E 12 3 O E 6 8 E O 6 8 E O
Tungsten alloys 300 1013 S9 60 5 E O 67 5 E O 120 9 E O 60 7 E O M 48 5 E O 12 8 E O 12 8 E OMolybdenum alloys 300 1013 S10 60 5 E O 67 5 E O 120 9 E O 60 7 E O M 48 5 E O 12 8 E O 12 8 E O
H Hardened steelhardened and tempered 50 HRC – H1 48 4 O E 34 4 O E 36 3 O E 19 2 O Ehardened and tempered 55 HRC – H2 32 3 O E 26 3 O E 31 3 O Ehardened and tempered 60 HRC – H3
Hardened cast iron hardened and tempered 55 HRC – H4 32 3 O E 26 3 O E 31 3 O E
O
Thermoplasts without abrasive fillers O1 100 16 E O 95 16 E O 130 16 E O 100 16 E O 45 7 E O 22 8 E 22 8 EThermosetting plastics without abrasive fillers O2 45 7 E O 22 8 L 22 8 LPlastic, glass-fibre reinforced GFRP O3 35 6 L 16 8 L 16 8 LPlastic, carbon-fibre reinforced CFRP O4 25 5 LPlastic, aramid fibre reinforced AFRP O5 45 7 LGraphite (technical) 80 Shore O6 25 5 L
1 The classification of the machining groups can be found in the Walter General catalogue 2012 from page ¤H 8¤ onwards.
E = EmulsionO = OilM = MQLL = dry
= Cutting data for wet machining
= dry machining is possible, cutting data must be selected from TEC
vC = Cutting speedVCRR = vc rating chart from page ¤B 382¤
VRR = feed rating chart from page ¤B 384¤
Cutting data
89Walter Titex – Drilling
ORDERING INFORMATION
Mat
eria
l gro
up
Solid carbide drills 3 x Dc Solid carbide drills 5 x Dc Pilot drills Centring drills Reaming tools
Designation K3299XPLK3899XPL K3879XPL A3393TTP K3281TFT K1161XPL F2162 F2171
Type X·treme Step 90 X·treme Step 90 X·treme Inox X·treme Pilot Step 90 - straight-fluted Left-hand spiralDimensions Walter standard Walter standard DIN 6537 L Walter standard DIN 333 - form A Walter standard Walter standard
Ø range (mm) 3,30 – 14,00 3,30 – 14,50 3,00 – 20,00 3,00 – 16,00 0,50 – 6,30 2,00 – 20,00 2,00 – 20,00Cutting tool material K30F K30F K30F K30F K10/20 K10 K10
Coating XPL XPL TPP TFT XPL blank blankPage ¤58¤ ¤58¤ ¤60¤ ¤59¤ ¤85¤ ¤86¤ ¤86¤
Structure of main material groups and identification letters
Brin
ell h
ardn
ess
HB
Tens
ile s
tren
gth
R mN
/mm
2
Mac
hini
ng g
roup
1
Workpiece materialvc VRR vc VRR vc VRR vc VRR vc VRR vc VRR vc VRR
P
Non-alloyed steel
C ≤ 0.25% annealed 125 428 P1 140 12 E O M L 110 12 E O M L 150 10 E O M L 120 12 E O M L 72 6 E O M L 24 8 E O 24 8 E OC > 0.25... ≤ 0.55% annealed 190 639 P2 140 12 E O M L 120 12 E O M L 110 10 E O M L 105 12 E O M L 68 6 E O M L 22 8 E O 22 8 E OC > 0.25... ≤ 0.55% heat treated 210 708 P3 130 12 E O M L 110 12 E O M L 100 10 E O M L 100 12 E O M L 63 6 E O M L 21 8 E O 21 8 E OC > 0.55% annealed 190 639 P4 140 12 E O M L 120 12 E O M L 110 10 E O M L 105 12 E O M L 68 6 E O M L 22 8 E O 22 8 E OC > 0.55% heat treated 300 1013 P5 105 10 E O M L 95 10 E O M L 75 9 E O M L 48 5 E O M L 16 8 E O 16 8 E OMachining steel (short-chipping) annealed 220 745 P6 150 12 E O M L 110 12 E O M L 135 12 E O M L 120 12 E O M L 72 6 E O M L 24 8 E O 24 8 E O
Low-alloyed steel
annealed 175 591 P7 140 12 E O M L 120 12 E O M L 110 10 E O M L 105 12 E O M L 68 6 E O M L 22 8 E O 22 8 E Oheat treated 300 1013 P8 105 10 E O M L 95 10 E O M L 75 9 E O M L 48 5 E O M L 16 8 E O 16 8 E Oheat treated 380 1282 P9 80 7 O E 63 7 O E 50 6 O E M L 32 3 O E 10 8 O E 10 8 O Eheat treated 430 1477 P10 63 5 O E 48 5 O E 42 4 O E 24 2 O E 6 8 O E 6 8 O E
High-alloyed steel and High-alloyed tool steel
annealed 200 675 P11 71 9 E O 63 9 E O 67 9 E O 42 4 E O 14 8 E O 14 8 E Ohardened and tempered 300 1013 P12 95 9 E O 80 9 E O 60 7 E O M L 38 4 E O 12 8 E O 12 8 E Ohardened and tempered 400 1361 P13 63 5 O E 48 5 O E 42 4 O E 24 2 O E 8 8 O E 8 8 O E
Stainless steelferritic/martensitic, annealed 200 675 P14 71 9 E O 63 9 E O 90 9 E O 67 9 E O 42 4 E O 14 8 E O 14 8 E Omartensitic, heat treated 330 1114 P15 40 8 E O 40 7 E O 50 8 E O 42 7 E O 32 3 E O 10 8 E O 10 8 E O
M Stainless steelaustenitic, quench hardened 200 675 M1 50 6 E O 50 6 E O 42 5 E O 8 8 8 8austenitic, precipitation hardened (PH) 300 1013 M2 45 6 E O 53 6 E O 65 6 E O 56 6 E O 21 3 E O 12 8 12 8austenitic/ferritic, duplex 230 778 M3 34 5 E O 50 6 E O 34 5 E O 6 8 6 8
K
Malleable cast ironferritic 200 675 K1 100 16 E O M L 90 16 E O M L 100 16 E O M L 72 8 E O M L 20 8 E O 20 8 E Opearlitic 260 867 K2 63 10 E O M L 90 16 E O M L 75 16 E O M L 58 7 E O M L 16 8 E O 16 8 E O
Grey cast ironlow tensile strength 180 602 K3 125 16 E O M L 110 16 E O M L 120 16 E O M L 86 8 E O M L 24 8 E O 24 8 E Ohigh tensile strength/austenitic 245 825 K4 105 16 E O M L 95 16 E O M L 100 16 E O M L 72 8 E O M L 20 8 E O 20 8 E O
Cast iron with spheroidal graphiteferritic 155 518 K5 130 16 E O M L 110 16 E O M L 95 20 E M L 72 8 E O M L 20 8 E O 20 8 E Opearlitic 265 885 K6 95 16 E O M L 90 16 E O M L 75 16 E O M L 58 7 E O M L 16 8 E O 16 8 E O
GGV (CGI) 200 675 K7 110 16 E O M L 100 16 E O M L 85 20 O E M L 65 8 E O M L 18 8 E O 18 8 E O
N
Aluminium wrought alloysnot precipitation hardenable 30 – N1 400 16 E O M 260 10 E O 450 16 E O M 400 16 E O M 130 5 E O 63 10 E O 63 10 E Oprecipitation hardenable, precipitation hardened 100 343 N2 400 16 E O M 260 10 E O 450 16 E O M 400 16 E O M 130 5 E O 63 10 E O 63 10 E O
Cast aluminium alloys≤ 12% Si, not precipitation hardenable 75 260 N3 250 16 E O M 240 16 E O 250 16 E O M 250 16 E O M 105 7 E O 50 10 E O 50 10 E O≤ 12% Si, precipitation hardenable, precipitation hardened 90 314 N4 240 16 E O M 210 16 E O 240 16 E O M 240 16 E O M 90 7 E O 45 10 E O 45 10 E O> 12% Si, not precipitation hardenable 130 447 N5 190 16 E O M 170 12 E O 190 16 E O M 190 16 E O M 71 7 E O 36 10 E O 36 10 E O
Magnesium alloys 70 250 N6 240 16 M L 240 16 M L 240 16 M L 90 7 M L 45 10 O 45 10 O
Copper and copper alloys (bronze/brass)
non-alloyed, electrolytic copper 100 343 N7 190 8 E O M 200 7 E O M 210 9 E O M 210 9 E O M 90 3 E O M 45 10 E O 45 10 E Obrass, bronze, red brass 90 314 N8 160 10 E O 170 12 E O 180 12 E O 180 12 E O 75 6 E O 36 10 E O 36 10 E OCu-alloys, short-chipping 110 382 N9 190 16 E O M 190 16 E O M L 190 16 E O M 190 16 E O M 80 8 E O M L 40 10 E O 40 10 E Ohigh-strength, Ampco 300 1013 N10 60 5 E O 67 5 E O 60 7 E O 60 7 E O M 48 5 E O 12 10 E O 12 10 E O
S
Heat-resistant alloys
Fe-basedannealed 200 675 S1 50 6 E O 48 6 E O 42 5 E O 33 2 O E 12 8 E O 12 8 E Oprecipitation hardened 280 943 S2 30 5 O E 36 5 O E 26 4 O E 15 2 O E 10 8 E O 10 8 E O
Ni or Co baseannealed 250 839 S3 34 5 E O 40 5 E O 32 4 E O 27 2 O E 10 8 E O 10 8 E Oprecipitation hardened 350 1177 S4 19 4 O E 24 4 O E 16 3 O E 10 1 O E 6 8 E O 6 8 E Ocast 320 1076 S5 26 4 O E 30 4 O E 20 3 O E 12 1 O E 6 8 E O 6 8 E O
Titanium alloyspure titanium 200 675 S6 56 6 O E 42 5 O E 60 6 O E 56 6 O E 10 8 E O 10 8 E O+α and β alloys, precipitation hardened 375 1262 S7 50 5 O E 36 4 O E 53 5 O E 48 5 O E 8 8 E O 8 8 E Oβ alloys 410 1396 S8 12,5 4 O E 18 4 O E 12 3 O E 6 8 E O 6 8 E O
Tungsten alloys 300 1013 S9 60 5 E O 67 5 E O 120 9 E O 60 7 E O M 48 5 E O 12 8 E O 12 8 E OMolybdenum alloys 300 1013 S10 60 5 E O 67 5 E O 120 9 E O 60 7 E O M 48 5 E O 12 8 E O 12 8 E O
H Hardened steelhardened and tempered 50 HRC – H1 48 4 O E 34 4 O E 36 3 O E 19 2 O Ehardened and tempered 55 HRC – H2 32 3 O E 26 3 O E 31 3 O Ehardened and tempered 60 HRC – H3
Hardened cast iron hardened and tempered 55 HRC – H4 32 3 O E 26 3 O E 31 3 O E
O
Thermoplasts without abrasive fillers O1 100 16 E O 95 16 E O 130 16 E O 100 16 E O 45 7 E O 22 8 E 22 8 EThermosetting plastics without abrasive fillers O2 45 7 E O 22 8 L 22 8 LPlastic, glass-fibre reinforced GFRP O3 35 6 L 16 8 L 16 8 LPlastic, carbon-fibre reinforced CFRP O4 25 5 LPlastic, aramid fibre reinforced AFRP O5 45 7 LGraphite (technical) 80 Shore O6 25 5 L
1 The classification of the machining groups can be found in the Walter General catalogue 2012 from page ¤H 8¤ onwards. The specified cutting data are average recommended values. For special applications, adjustment is recommended.
TURNING Walter ¤3¤
ISOturning ¤4¤
Grooving ¤14¤
Orderinginformation ¤20¤
DRILLINGANDTHREADING WalterTitex ¤39¤
Solidcarbidedrills ¤40¤
PCDdrills ¤56¤
Orderinginformation ¤58¤
Walter ¤91¤
Drills ¤92¤
Counterboredrills ¤96¤
Precisionboring ¤97¤
Orderinginformation ¤98¤
WalterPrototyp ¤103¤
HSS-E-PMtaps ¤104¤
HSS-Etaps ¤106¤
Solidcarbidethreadformers ¤110¤
Solidcarbidethreadmills ¤112¤
Orderinginformation ¤114¤
MILLING WalterPrototyp ¤155¤
Solidcarbideendmills ¤156¤
Ball-noseendmills ¤162¤
Orderinginformation ¤166¤
Walter ¤177¤
Thenewgenerationofcutters ¤179¤
Cuttingtoolmaterials ¤182¤
Facemills ¤186¤
Copymills ¤190¤
Orderinginformation ¤192¤
Walteradaptors ¤217¤
Adaptors ¤218¤
Orderinginformation ¤220¤
Alphanumericindex ¤228¤
_TOOlInnOvATIOnSInDrIllInG
Extremelyaccurate,extremelyefficient.
ProductinnovationsEdition2012-2
Drillingandthreading
DrIll
WalterTiger·tec®Silver–thenewforceinmachining.
Extremelysmoothrakefacetominimisewear
Silvercolouredflankfaceforextremelyeasyweardetectionduringuse
Extremelystablecuttingedgesforhighlevelofprocessreliability
92
Tiger·tec®Silver Types:P484xWKP25SandWKP35S
NEW2012
THEPERFECTCUTTINGTOOLMATERIALFORDRILLING.
TheTiger·tec®Silvertechnologyenablesoptimisedper-formanceofindexabledrillinginsertsanda100%increaseinoutput.
THEINDEXABLEINSERT
– Outerindexableinsertwithincreasedwearresistanceduetoitsuniquealuminiumoxidelayeridealforuseasaperipheralcuttingedge
– TougherthanpreviousTiger·tec®CvDcoatings.Optimisedresidualstrengthandacombinationoftoughnessandwearresistancemakethisthefirstchoiceforacentreinsert
– lowwearduetoextremelysmoothrakeface
THEAPPLICATION
– ThenewWKP35SandWKP25STiger·tec®SilvercuttingtoolmaterialsareidealfordrillingISOPandISOKmaterials
THEADVANTAGES
– Upto100%increaseinoutput– reliableandeasyweardetection– Shortermachiningtimes– reducedchangeovertimes– reductionintotalcosts– Increasedmachinecapacityutilisation– Outstandingprocessreliability
Orderinginformationcanbefoundfrompage¤100¤onwards.
SUBlInEÜBErHEADlInE(1.1)
Headlineingrün(1.2),auchfürUmbrücheals3-Zeilermöglich.Headlineingrün,auchfürUmbrücheals3-Zeilermöglich.
93
COMPETITORS
Competitorproductsexhibitheavy,clearlyvisiblewearonthecuttingedgeandsignificantfractures.
Tiger·tec® Silver
Highwearresistance,toughnessandtemperatureresistancepreventtheformationofhairlinecracksandfractures.Theinsertlastslonger.
Tiger·tec®
relativelyevensignsofwearandaminimalforma-tionofhairlinecracksdemonstratetheperformanceofthelegendaryTiger·tec®cuttingtoolmaterials.
TOOLLIFECOMPARISON:Con-rodmachining
Workpiecematerial: C70Indexableinsert: P4841C–3r–E57Cuttingtoolmaterial: WKP35S–Tiger·tec®SilverTool: B4212Ø27.7mm
TIGER·TEC®SILVERTECHNOLOGy
CompletelynewCvDtechnology:– Combineswearresistanceandtoughness– Forcastironandsteelmaterials
Optimumfrictionbehaviour
resistanttotribochemicalwear
Increasedresistancetoflankfacewear
Excellenthardnesstotoughnessratio
α-Al2O3 Ti(C,n) Substrate
Cuttingdata
Competition Tiger·tec® Tiger·tec®Silvervc 210m/min 210m/min 210m/minN 2820 2820 2820f 0.08mm 0.08mm 0.08mmvf 226 226 226Toollife 2500components 4000components 4500components
Numberofcomponentscomparison
0 15001000500 3000 400025002000 3500 4500 5000
Competition 2500 + 80%*
Tiger·tec® Silver WKP35S 4500
Tiger·tec® 4000
Components
Walter–Drilling
*incomparisontothecompetition
94
DrIll
WalterXtra·tec®InsertDrill–veryexact,veryefficient,veryeconomical.
THETOOL
– Drillwithindexableinsertsfeaturingfourcuttingedges– Øextendedto59mm– Z=1effective– Holedepth:2xDc,3xDc,4xDcand5xDc– Diameterrange:13.5–80mm(upto120mmasWalterXpressinallintermediatediameters)
– Idealinsertpositionensuresforcesarebalancedduringmachining
– Optimisedfluteforbetterchipremovalandstablebody– Hard-nickelplatedsurfaceprotectsagainstcorrosionandwearandensuresbetterchipflow
– ImprovedhandlingandhigherclampingandreleasetorqueusingTorxPlusscrews
– Cylindricalcollarforsimplegaugingoftooldiameters
THEAPPLICATION
– Forallsteelandcastironmaterialsaswellasforstainlessmaterialsandmaterialswhicharedifficulttomachine
– Fordrilling,spotdrillingoninclinedorconvexsurfaces,chaindrilling
– Ideallysuitedforuseingeneralmechanicalengineering,automotiveandmassproductionindustriesaswellasinaerospaceapplications
yOURADVANTAGES
– Increaseinproductivityduetohigherworkpiecevalues– lowholetoleranceduetotheoptimumbalanceofforces– Costreduction:• 4actualcuttingedges• Highercuttingparameters• Savingonadditionalsubsequentoperations
– Excellentsurfacequalityduetowiperedgeinsertatperiphery
– Highlevelofprocessreliabilityduetopositivelockingoftheinsert
Optimumarrangementofinsertsforbalancedforcesduringmachining
nickel-plated,helicalflutesforoptimumchipremoval
Xtra·tec®Insertdrill Types:B4212,B4213,B4214,B4215
PROGRAMME ADDITIONS
2012
95
E57–theuniversalone– 13°rakeangle– Formediummachiningconditions
– Forcastironandsteel,includingstainlessanddifficulttocutmaterials
E67–thespecialone– 13°rakeangle– Specialgeometryforopti-mumchipformation
– Forlong-chippingmateri-als,e.g.St37,stainlessandevendifficulttocutmaterials,andaluminium
A57–thestableone– 0°rakeangle– Forunfavourablemachin-ingconditionsmainlyforcastironandsteelmaterials
THEOUTERINSERT THECENTREINSERT
THEGEOMETRyVARIANTS
Cuttingedgemarking
Cuttingedge0°chipstiffeningchamfer Sharppitgeometry
Fullygroundcircumference
Walter–Drilling
Watchproductvideo:ScanQrcodeorgodirectlyto
http://goo.gl/qYii0
– Fullysinteredversionwithcornerradiusattheholediameter
– versionwithcircumfer-encefullyground:wiperedgeattheholediameterensuresagoodsurfacefinishquality
– new:nowavailableinTiger·tec®Silver!Thecuttingtoolmaterialforhighestcuttingspeedsandmaximumprocessreliability
– new:nowavailableinTiger·tec®Silver!Thecuttingtoolmate-rialforlongesttoollifeandmaximumprocessreliabilityinthedrillingofISOPandISOKmaterials
– new:newWXP40PvDgradeforalongertoollifewhendrillingISOP,ISOMandISOSmaterials
– Speciallydevelopedtomeettherequirementsofacentreinsert
COUnTErBOrEDrIllS
Walter Boring:NewE47universalgeometry–excellentchipbreaking,flexibleandveryeconomical.
96
THEINSERT
– InsertinbasicshapesSC..andWC..– Circumferencesintereddesign– Straightcuttingedge– variablewidthgroovedesignedfordifferentcuttingdepths
– ProtectivechamferdesignedfortheISOmachininggroups
– variousTiger·tec®cuttingmaterials(PvDandCvD)
THEAPPLICATION
– ThenewE47issuitableforallcounterboringoperations,withandwithoutinterruptedcut
– TheWSM20andWSM30cuttingmaterialsaremultigradecuttingmaterialswithPvDTiger·tec®coating,whichcanbeusedwithISOM,SandPmachininggroups
– TheWPP20isaCvDTiger·tec®cuttingmaterialusedmainlywithsteelbutalsowithcastironmaterials
E47–THEUNIVERSALONE
– 15°rakeangle– Flexibleuniversalgeometryforalmostallcuttingdepths
– FormaterialsofISOmachininggroupsP,M,KandS
yOURADVANTAGES
– Higherprocessstabilityduetoexcellentchipbreakingacrossthefullcuttingdepthrange
– Foruniversaluse:• Optimumusefromsmall(0.2mm)todeepcutting
depths• ForseveralISOgroups
– Increaseinproductivitydueto:• highercuttingdatafromTiger·tec®
• longertoollifeduetooptimumgeometrydesign
newgeometrywithvariablegroovewidthforexcellentchipbreaking
Tiger·tec®cuttingmaterialstoincrease
thecuttingdataStraightcuttingedgeforaccurateprofile
Fullysinteredcircumference
NEW2012
CC..06/09/12 SC..06/09/12
FORMVARIANTS
UniversalgeometryE47 WC..06/09/12
Orderinginformationcanbefoundfrompage¤99¤onwards.
Watchproductvideo:ScanQrcodeorgodirectlyto
http://goo.gl/WSljP
PrECISIOnBOrInG
WalterPrecisionMini:thequickandeasytoolformaximumprecision.SettingdeviceforB3230andB4030.
97
yOURADVANTAGES
– Precisecuttingedgeorientationonthespindleboringbar– Easyadjustmentoftheprojectionlength– Quickapproximatesettingoftheboringdiameter
Walter–Drilling
NEW2012
Orderinginformationcanbefoundfrompage¤98¤.
THEAPPLICATION
ForcuttingedgeorientationandpresettingtheprojectionlengthandtheboringdiameteroftheB3230andB4030precisionboringtools.
OPERATION
Themeasuringslideisadjustedandclampedatthedesiredprojectionlengthofthetoolholder.Thetoolholderispulledoutuntilthecuttingedgetouchestheloweredgeofthemeasur-ingslideandtheinsertcornercanbealignedwiththescale.Thescaleonthemeasuringslidepermitstheapproximatepresettingoftheboringdiameter.
WalterPrecisionMini Types:EG-FB-160
ORDERING INFORMATION
98 Walter – Drilling9898
Xtra·tec® Point Drill B4013
DesignationDc
mmd1
mmd2
mmX1
mmX2
mmLc
mm kg
No. of indexable
inserts Designation
X2X1
Lc
Dc d1 d2
B4013.F40.32,0.Z02.96R 32 40 50 150 70 102 1,3 1 P600 . . -D32 . . R
B4013.F40.33,0.Z02.99R 33 40 50 154 70 105 1,34 1 P600 . . -D33 . . R
B4013.F40.34,0.Z02.102R 34 40 50 158 70 108 1,39 1 P600 . . -D34 . . R
B4013.F40.35,0.Z02.105R 35 40 50 162 70 111 1,45 1 P600 . . -D35 . . R
B4013.F40.36,0.Z02.108R 36 40 50 166 70 115 1,52 1 P600 . . -D36 . . R
B4013.F40.37,0.Z02.111R 37 40 50 170 70 118 1,59 1 P600 . . -D37 . . R
Xtra·tec® Point Drill B4015
DesignationDc
mmd1
mmd2
mmX1
mmX2
mmLc
mm kg
No. of indexable
inserts Designation
Dc
Lcl5l4
d1
d4 B4015.F40.32,0.Z02.160R 32 40 50 214 70 166 1,5 1 P600 . . -D32 . . R
B4015.F40.33,0.Z02.165R 33 40 50 220 70 171 1,6 1 P600 . . -D33 . . R
B4015.F40.34,0.Z02.170R 34 40 50 226 70 176 1,69 1 P600 . . -D34 . . R
B4015.F40.35,0.Z02.175R 35 40 50 232 70 181 1,78 1 P600 . . -D35 . . R
B4015.F40.36,0.Z02.180R 36 40 50 238 70 187 1,87 1 P600 . . -D36 . . R
B4015.F40.37,0.Z02.185R 37 40 50 244 70 192 1,97 1 P600 . . -D37 . . R
Xtra·tec® Point Drill B4017
DesignationDc
mmd1
mmd2
mmX1
mmX2
mmLc
mm kg
No. of indexable
inserts Designation
Dc
Lcl5l4
d1
d4 B4017.F40.32,0.Z02.224R 32 40 50 278 70 230 1,7 1 P600 . . -D32 . . R
B4017.F40.33,0.Z02.231R 33 40 50 286 70 237 1,88 1 P600 . . -D33 . . R
B4017.F40.34,0.Z02.238R 34 40 50 294 70 244 1,99 1 P600 . . -D34 . . R
B4017.F40.35,0.Z02.245R 35 40 50 302 70 251 2,1 1 P600 . . -D35 . . R
B4017.F40.36,0.Z02.252R 36 40 50 310 70 259 2,23 1 P600 . . -D36 . . R
B4017.F40.37,0.Z02.259R 37 40 50 319 70 266 2,36 1 P600 . . -D37 . . R
Setting device for B3230 and B4030
Designation
EG-FB-160 Setting device for cutting edge orientation
NEW2012
99Walter – Drilling
ORDERING INFORMATION
ISO indexable boring inserts CCMT – E47
Designationd
mml
mms
mmr
mm
P M K S
HC HC HC HC
WP
P20
WS
M20
WS
M30
WS
M20
WS
M30
WP
P20
WS
M20
WS
M30
CCMT 060202–E47 6,35 6,45 2,38 0,2 c b c b c c b c
CCMT 060204–E47 6,35 6,45 2,38 0,4 c b c b c c b c
CCMT 09T302–E47 9,525 9,67 3,97 0,2 c b c b c c b c
CCMT 09T304–E47 9,525 9,67 3,97 0,4 c b c b c c b c
CCMT 09T308–E47 9,525 9,67 3,97 0,8 c b c b c c b c
CCMT 120408–E47 12,7 12,9 4,76 0,8 c b c b c c b c
CCMT 120412–E47 12,7 12,9 4,76 1,2 c b c b c c b c
ISO indexable boring inserts WCMT – E47
Designationd
mml
mms
mmr
mm
P M K S
HC HC HC HC
WP
P20
WS
M20
WS
M30
WS
M20
WS
M30
WP
P20
WS
M20
WS
M30
WCMT 030204–E47 5,56 3,8 2,38 0,4 c b c b c c b c
WCMT 040204–E47 6,35 4,3 2,38 0,4 c b c b c c b c
WCMT 06T304–E47 9,525 6,5 3,97 0,4 c b c b c c b c
WCMT 06T308–E47 9,525 6,5 3,97 0,8 c b c b c c b c
WCMT 080408–E47 12,7 8,72 4,76 0,8 c b c b c c b c
ISO indexable boring inserts SCMT – E47
Designationd
mml
mms
mmr
mm
P M K S
HC HC HC HC
WP
P20
WS
M20
WS
M30
WS
M10
WS
M20
WS
M30
WP
P20
WS
M10
WS
M20
WS
M30
SCMT 060204–E47 6,35 6,35 2,38 0,4 c b c a b c c a b c
SCMT 09T304–E47 9,525 9,525 3,97 0,4 c b c a b c c a b c
SCMT 09T308–E47 9,525 9,525 3,97 0,8 c b c a b c c a b c
SCMT 120408–E47 12,7 12,7 4,76 0,8 c b c a b c c a b c
r
7˚80˚
d
sl
r
7˚
80˚ sl
d
r
90˚
7˚sl
d
NEW2012
NEW2012
a b c New addition to range
a b c In the range previously
ORDERING INFORMATION
100 Walter – Drilling
Outer insert P484 . P for Xtra·tec® Insert Drill
P M K S
HC HC HC HC HC
Designation
Number of cutting
edgesl
mms
mmr
mm α ε WK
P25S
WK
P35S
WS
P45
WS
P45
WK
P25S
WK
P35S
WS
P45
WX
P40
Size 1–2
Size 3–7
P4840P-1R-A57 4 4,55 1,96 0,29 11° 90° b c c c b c c
P4840P-2R-A57 4 5,52 2,38 0,34 11° 90° b c c c b c c
P4840P-3R-A57 4 6,5 2,8 0,4 11° 90° b c c c b c c
P4840P-4R-A57 4 7,8 3,36 0,48 11° 90° b c c c b c c
P4840P-5R-A57 4 9,56 4,12 0,59 11° 90° b c c c b c c
P4840P-6R-A57 4 11,75 4,87 0,7 11° 90° b c c c b c c
P4840P-7R-A57 4 14,03 5,53 0,8 11° 90° b c c c b c c
P4840P-8R-A57 4 16,5 5,53 1,0 11° 90° b c c c b c c
P4840P-1R-E57 4 4,55 1,96 0,29 11° 90° a b c c b c c
P4840P-2R-E57 4 5,52 2,38 0,34 11° 90° a b c c b c c
P4840P-3R-E57 4 6,5 2,8 0,4 11° 90° a b c c b c c
P4840P-4R-E57 4 7,8 3,36 0,48 11° 90° a b c c b c c
P4840P-5R-E57 4 9,56 4,12 0,59 11° 90° a b c c b c c
P4840P-6R-E57 4 11,75 4,87 0,7 11° 90° a b c c b c c
P4840P-7R-E57 4 14,03 5,53 0,8 11° 90° a b c c b c c
P4840P-8R-E57 4 16,5 5,53 1,0 11° 90° a b c c b c c
P4840P-1R-E67 4 4,55 1,96 0,29 11° 90° a b c c b b c
P4840P-2R-E67 4 5,52 2,38 0,34 11° 90° a b c c b b c
P4840P-3R-E67 4 6,5 2,8 0,4 11° 90° a b c c b b c
P4840P-4R-E67 4 7,8 3,36 0,48 11° 90° a b c c b b c
P4840P-5R-E67 4 9,56 4,12 0,59 11° 90° a b c c b b c
P4840P-6R-E67 4 11,75 4,87 0,7 11° 90° a b c c b b c
P4840P-7R-E67 4 14,03 5,53 0,8 11° 90° a b c c b b c
P4840P-8R-E67 4 16,5 5,53 1,0 11° 90° a b c c b b c
P4841P-1R-A57 4 4,55 1,96 0,29 11° 90° b c c c b c c
P4841P-2R-A57 4 5,52 2,38 0,34 11° 90° b c c c b c c
P4841P-3R-A57 4 6,5 2,8 0,4 11° 90° b c c c b c c
P4841P-4R-A57 4 7,8 3,36 0,48 11° 90° b c c c b c c
P4841P-5R-A57 4 9,56 4,12 0,59 11° 90° b c c c b c c
P4841P-6R-A57 4 11,75 4,87 0,7 11° 90° b c c c b c c
P4841P-7R-A57 4 14,03 5,53 0,8 11° 90° b c c c b c c
P4841P-8R-A57 4 16,5 5,53 1,0 11° 90° b c c c b c c
P4841P-1R-E57 4 4,55 1,96 0,29 11° 90° a b c c b c c
P4841P-2R-E57 4 5,52 2,38 0,34 11° 90° a b c c b c c
P4841P-3R-E57 4 6,5 2,8 0,4 11° 90° a b c c b c c
P4841P-4R-E57 4 7,8 3,36 0,48 11° 90° a b c c b c c
P4841P-5R-E57 4 9,56 4,12 0,59 11° 90° a b c c b c c
P4841P-6R-E57 4 11,75 4,87 0,7 11° 90° a b c c b c c
P4841P-7R-E57 4 14,03 5,53 0,8 11° 90° a b c c b c c
P4841P-8R-E57 4 16,5 5,53 1,0 11° 90° a b c c b c c
HC = Coated carbide
l
α
s
r
l
α
sє є
l
α
s
r
l
α
sє є
a b c New addition to range
a b c In the range previously
101Walter – Drilling
ORDERING INFORMATION
l
α
s
r
l
α
sє є
l
α
s
r
l
α
sє є
Centre insert P484 . C for Xtra·tec® Insert Drill
P M K S
HC HC HC HC HC
Designation
Number of cutting
edgesl
mms
mmr
mm α ε WK
P25S
WK
P35S
WS
P45
WS
P45
WK
P25S
WK
P35S
WS
P45
WX
P40
Size 1–2
Size 3–7
P4841C-1R-A57 4 4,9 1,96 0,29 11° 90° c c c
P4841C-2R-A57 4 5,95 2,38 0,34 11° 90° c c c
P4841C-3R-A57 4 7,0 2,8 0,4 11° 90° c c c
P4841C-4R-A57 4 8,4 3,36 0,48 11° 90° c c c
P4841C-5R-A57 4 10,29 4,12 0,59 11° 90° c c c
P4841C-6R-A57 4 12,24 4,87 0,7 11° 90° c c c
P4841C-7R-A57 4 14,69 5,53 0,8 11° 90° c c c
P4841C-8R-A57 4 17,49 5,53 1,0 11° 90° c c c
P4841C-1R-E57 4 4,9 1,96 0,29 11° 90° c c c
P4841C-2R-E57 4 5,95 2,38 0,34 11° 90° c c c
P4841C-3R-E57 4 7,0 2,8 0,4 11° 90° c c c
P4841C-4R-E57 4 8,4 3,36 0,48 11° 90° c c c
P4841C-5R-E57 4 10,29 4,12 0,59 11° 90° c c c
P4841C-6R-E57 4 12,24 4,87 0,7 11° 90° c c c
P4841C-7R-E57 4 14,69 5,53 0,8 11° 90° c c c
P4841C-8R-E57 4 17,49 5,53 1,0 11° 90° c c c
P4840C-1R-E67 4 4,9 1,96 0,29 11° 90° c c c
P4840C-2R-E67 4 5,95 2,38 0,34 11° 90° c c c
P4840C-3R-E67 4 7,0 2,8 0,4 11° 90° c c c
P4840C-4R-E67 4 8,4 3,36 0,48 11° 90° c c c
P4840C-5R-E67 4 10,29 4,12 0,59 11° 90° c c c
P4840C-6R-E67 4 12,24 4,87 0,7 11° 90° c c c
P4840C-7R-E67 4 14,69 5,53 0,8 11° 90° c c c
P4840C-8R-E67 4 17,49 5,53 1,0 11° 90° c c c
HC = Coated carbide
a b c New addition to range
a b c In the range previously
TURNING Walter ¤3¤
ISOturning ¤4¤
Grooving ¤14¤
Orderinginformation ¤20¤
DRILLINGANDTHREADING WalterTitex ¤39¤
Solidcarbidedrills ¤40¤
PCDdrills ¤56¤
Orderinginformation ¤58¤
Walter ¤91¤
Drills ¤92¤
Counterboredrills ¤96¤
Precisionboring ¤97¤
Orderinginformation ¤98¤
WalterPrototyp ¤103¤
HSS-E-PMtaps ¤104¤
HSS-Etaps ¤106¤
Solidcarbidethreadformers ¤110¤
Solidcarbidethreadmills ¤112¤
Orderinginformation ¤114¤
MILLING WalterPrototyp ¤155¤
Solidcarbideendmills ¤156¤
Ball-noseendmills ¤162 Orderinginformation ¤166¤
Walter ¤177¤
Thenewgenerationofcutters ¤179¤
Cuttingtoolmaterials ¤182¤
Facemills ¤186¤
Copymills ¤190¤
Orderinginformation ¤192¤
Walteradaptors ¤217¤
Adaptors ¤218¤
Orderinginformation ¤220¤
Alphanumericindex ¤228¤
_TOOLINNOVATIONSINTHREADING
EcoPlus–thenewhigh-techgeneration.
ProductinnovationsEdition2012-2
Drillingandthreading
104
HSS-E-PMTAPS
Walter PrototypParadur®EcoPlus–thehigh-techthreadingtoolwithawiderangeofapplications.
NEW2012
DIMENSION RANGEM:M2-M64MF:M6x0.75–M22x1.5UNC:UNC2-UNC3/4
UNF:UNF4-UNF5/8
G:G1/8-G1
THETOOL
– Universalhigh-performanceHSS-E-PMtapwitha45°helixangleandlongflutes
– THLcoatingforanoutstandingtoollife– ChamferformCandE– Taperedguidetopreventfractures– TIN-andTHL-coatedoptions– Tolerances:6HX,6GX,2BandG-X– Variants:•LH(left-handthread)•KA(axialcoolantchannel)•KR(radialcoolantchannel)
THEAPPLICATION
– Blindholethreadupto3xd– Long-chippingmaterialshavingmoderatetoahighertensilestrength
– Short-chippingmaterials– Abrasivematerialswithatendencytoweld– Structuralsteelandhigh-strengthsteel(350–1400N/mm²)– Stainlesssteel– Spheroidalgraphiteandmalleablecastiron– Shortandlong-chippingcopperandaluminiumalloys
YOURADVANTAGES
– Ahighlevelofprocessreliabilityduetoverygoodchipformation
– Increasedtoollifeandstabilityduetonewlydevelopedmicroandthreadcoregeometry
– Fewertoolsrequired,sinceitcanbeapplieduniversallytoawiderangeofmaterials
– Fewertoolchangesandoptimummachineoutputresultingfromhighcuttingspeedsandlongtoollife
– ReductioninlubricantcostsduetothefacilityfordryorMQLmachiningwithsteel,castironandaluminiumalloys
Availablewithaxialorradialinternalcooling
Helixangle45°
THLcoating
Taperedguide
Longfluteswithspecialflutegeometry
Watchproductvideo:ScanQRcodeorgodirectlyto
http://goo.gl/uo2jR
Orderinginformationcanbefoundfrompage¤114¤onwards.
105WalterPrototyp–Threading
Longtoollife+optimumcuttingdata=maximumproductivity.
LockringParadur®EcoPlusM6blindhole
Cuttingdata Competitors Paradur®EcoPlusn 159rpm 265rpmvc 3m/min 5m/min
Workpiecematerial: V4A(1.4542)Tensilestrength: Approx.1000N/mm²Tool: Paradur® Eco Plus
EP2051302-M6Coating: THLHoletype: BlindholeThreaddepth: 16mm(2.5xDn)Coolinglubricant: Emulsion7%
Comparisonoftoollife(numberofthreads)
0 400 1200
Paradur® Eco Plus 1110
800
Competitors 720
Paradur®EcoPlus Type:EP2051342
HSS-E-PM
Shanktoleranceh9
ISOmaterialcolourcodingofmaterialgroups
NEWMARKINGONPACKAGING
P M K N S H O
EP2051342-M8 Paradur® Eco PlusHSS-E-PM THLISO2/6HX
15/124 042446 066969Applicationtable
••Primaryapplication •Secondaryapplication
106
HSS-ETAPS
Walter PrototypPrototex®X·pertP–theexpertforsteelinthroughandblindholethreads.
DIMENSION RANGEM:M1-M56MF:M2.2x0.25-M50x1.5UNC:UNC2-UNC11/2
UNF:UNF0-UNF11/2
G:G1/8-G2BSW:BSW1/8-BSW1
THETOOL
– HSS-Ethroughholetap– Straightflute– SpiralpointformB(3.5to5threads)– Uncoated,TiNandTiCN– Tolerances:4H,6H,6G,7G,2B,3B– Lengths:M,L,XL– Insertthreads(InsertEG..)– Variants:•LH(left-handthread)•AZ(interruptedteeth)
THEAPPLICATION
– Throughholethreadupto3xDN– ISO-P: Steelupto<1000N/mm2
– ISO-N: Al-Sialloys0.5% upto12%Sicontent
TiNcoating
Codeletterforprimaryapplication
Shanktoleranceh9
Spiralpoint
Straight-fluted
HSS-E
YOURADVANTAGES
– Highlevelofprocessreliabilityinlong-chippingmaterialsupto1000N/mm2
– Perfectself-guidancedueto7fullthreadforms
– Comprehensiveselectionofsizesandtolerances
MachiningconditionsISO-P≤M14(coated)
200 300 500 700 900400 600 800 10000
10
20
30
40
50
60
Re[N/mm²]
v c[m
/min
]
1xd3xd
NEW2012
Orderinginformationcanbefoundfrompage¤131¤onwards.
Prototex®X·pertP Type:P2031005
Watchproductvideo:ScanQRcodeorgodirectlyto
http://goo.gl/WpYT5
107
ISOmaterialcolourcodingofmaterialgroups
WalterPrototyp–Threading
HSS-ETAPS
Walter PrototypParadur®X·pertP–easyselectionspeedsthewaytotherightapplication.
DIMENSION RANGEM:M2-M64MF:M2.5x0.35-M52x3UNC:UNC2-UNC11/2
UNF:UNF1-UNF11/2
UNEF:UNEF1/4-UNEF1UN-8:UN11/8-UN21/4
G:G1/8-G2BSW:BSW1/8-BSW1
THETOOL
– HSS-Eblindholetap– Helixangle45°– ChamferformC=2-3thread– Taperedguideportion– Uncoated,andTINandTHLcoating– Tolerances:4H,6H,6G,7G,2B,3B– Lengths:std,long,extralong– Insertthreads(InsertEG..)– Variants:•LH(left-handthread)•AZ(interruptedteeth)
NEWMARKINGONPACKAGING
THEAPPLICATION
– Blindholethreadupto3.5xDN– ISO-P: Steelupto<1000N/mm2
– ISO-N: Al-Sialloys0.5%upto12%Sicontent
TiNcoating
Codeletterforprimaryapplication
Shanktoleranceh9
Taperedguide
45°helixangle
HSS-E
YOURADVANTAGES
– Outstandingchipformationdueto45°helixangle– Verygoodsurfacefinishqualityasaresultofthelargerakeangle
– Portfolioincludesnumerousthreadprofiles,sizeandtolerances
– Nopenetrationintosoftmaterialsduetostableself-guidanceeliminatessnagginginsoftmaterialsduetoprecisionclearanceangleflank
– Economicalforsmallbatchsizes
NEW2012
Orderinginformationcanbefoundfrompage¤121¤onwards.
Paradur®X·pertP Type:P2051905
P M K N S H O
P2051905-M8 Paradur® X·pert PHSS-E TiNISO2/6H
06/124 042446 066969Applicationtable
••Primaryapplication •Secondaryapplication
108
HSSTAPS
Walter PrototypPrototex®X·pertM–theexpertsforstainlessmaterials.
DIMENSION RANGEM:M1-M36MF:M5x0.5-M24x1.5UNC:UNC2-UNC1-8UNF:UNF5-UNF1-12G:G1/8-G1
THETOOL
– HSS-Ethroughholetap– Straightflute– SpiralpointformB(3.5to5threads)
– Threadcoresethigher– vap,TiNandTiCNcoatings– Tolerances:6HX,6GX,2B– Lengths:std– Threadinsertversionavailable(EG)
THEAPPLICATION
– Throughholethreadupto3xDN– ISO-Mstainlesssteelsfrom350to1200N/mm²
– ISO-Psecondprimaryapplicationfrom700to1200N/mm²
YOURADVANTAGES
– Highlevelofprocessreliabilityinlong-chippingmaterialsandmaterialswhichhaveatendencytostick
MachiningconditionsISO-M≤M14(coated)
8
10
12
14
16
400 500 700 900 1100600 800 1000 1200 1300 1400
6
4
2
0
Re[N/mm²]
v c[m
/min
]
1xd3xd
TiCNcoating
Shanktoleranceh9
Spiralpoint
Straight-fluted
Codeletterforprimaryapplication
HSS-E
Prototex®X·pertM Type:M2021306
NEW2012
Orderinginformationcanbefoundfrompage¤142¤onwards.
109
HSSTAPS
Walter PrototypParadur®X·pertM
WalterPrototyp–Threading
DIMENSION RANGEM:M1.6-M42MF:M4x0.5–M30x2UNC:UNC2-UNC11/2-6UNF:UNF6-UNF1-12UN-8:UN1-UN2-8G:G1/8-G1
THETOOL
– HSS-Eblindholetap– Helixangle40°– ChamferformC(2to3threads)– Threadcoresethigher– Taperedguidanceportion– vap,TiN,TiCNandTHL– Tolerances:6HX,6GX,2B,3B– Lengths:standardandextralong– Threadinsertversionavailable(EG)
THEAPPLICATION
– Blindholethreadupto2.5xDN– ISO-Mstainlesssteelfrom350to1200N/mm²– ISO-Psecondprimaryapplicationfrom700to1200N/mm²
YOURADVANTAGES
– Outstandingchipformationdueto40°helixangle– Excellentthreadqualityevenafterlongperiodsofuseduetohigherpositionofthethreadcore
– Comprehensiveselectionofsizesandtolerances– Tapsspeciallydesignedforstainlessmaterialswhichhaveatendencytostick
TiCNcoating
Taperedguidanceportion
Shanktoleranceh9
40°helixangle
Codeletterforprimaryapplication
HSS-E
Paradur®X·pertM Type:M2051306
NEW2012
Orderinginformationcanbefoundfrompage¤146¤onwards.
110
SOLIDCARBIDETHREADFORMERS
Walter Prototyp Protodyn®(S)HSC–solidcarbideformerswithmaximumcuttingspeedandextremelylongtoollife.
DIMENSION RANGEM:M3-M10MF:M8x1–M16x1.5
THETOOL
– Solidcarbidethreadformerforuseinallformablematerials– Newcarbidesubstrateguaranteesmaximumtoughnesswithhighestpossiblewearresistance
– TiCNcoatingforidealwearresistance– Speciallysuitedtosteelmachining– Versionwithlubricationgroovesandaxialcoolantchannelfordeepthreaddepths(4xDn)
– Optimisedpolygonalformreducesfrictionandincreasestoollife
– Availableintwochamfergeometries(formCandE)– Newtypeofchamfergeometryforuniformwearpattern– Shanktoleranceh6foruseinshrink-fitchucks
TiCNmultilayercoating
Optimisedpolygonalform
Axialcoolantsupply
Innovativechamfergeometry(formCandE)
YOURADVANTAGES
– Non-chippingthreadproductionprocesswithnobirdnestingorchipremovalproblems:Highlevelofproc-essreliability,evenfordeepblindholeandthroughholethreads
– Impressivetoollifeandattractiveprice/performanceratio– Fewertoolchangesbecauseoflongertoollife– Highlevelofdynamictensilestrengthoftheformedthreadduetocoldworkhardeningofthethreadflanksandthreadroot
– Point-freetoolguaranteesbestpossibleuseofcylindricalholedepth
Lubricationgrooves
THEAPPLICATION
– Blindandthroughholemachiningupto4xDn
– ISOPsteelupto<1200N/mm2
– ISOMstainlessmaterials<1000N/mm2
– ISONaluminiumalloys<12%Sicontent
Orderinginformationcanbefoundfrompage¤151¤onwards.
111
SOLIDCARBIDETHREADFORMERS
HighSpeedCutting(HSC)–fastandprecise.
WalterPrototyp–Threading
Protodyn®SHSC Type:HP8061716
InjectormachiningProtodyn®SHSCBlindholeM12x1
Cuttingdatan 663rpmvc 25m/min
Workpiecematerial: C45(1.0503)Tensilestrength: approximately36HRCTool: Protodyn® S HSC
HP8166716-M12x1Coating: TICNHoletype: BlindholeThreaddepth: 18mm(1.5xDn)Coolinglubricant: Oil
Wear-resistantandtoughmicrograincarbide
Shanktoleranceh6
Comparisonoftoollife(numberofthreads)
0 5000 15000
Protodyn® S HSC 12000
4.8-times increase in tool life
The result: Longertoollifeduetonewsubstrateandpolygonalform.
10000
Competition
Watchproductvideo:ScanQRcodeorgodirectlyto
http://goo.gl/hQuVr
112 Orderinginformationcanbefoundfrompage¤152¤onwards.
SOLIDCARBIDETHREADMILLS
Walter PrototypTMOorbitalthreadmill–nowwithinternalcoolantsupply.
THEAPPLICATION
– Universaluseinabroadmaterialspectrum– Blindholethreadmachiningpossibletoadepthof3xDn
PREREQUISITE
– Machiningcentreorturningmillingcentrewiththreadmillingoption
YOURADVANTAGES
– Maximumprocessreliabilityduetointernalcoolantsupply– Supportschipremovalparticularlywithdeepthreads– Significantlylongertoollife– Excellentthreadquality(surfacefinish,threadtolerance)
TMOorbitalthreadmill Type:H5087016
TiCNmultilayerhardcoating
15°helixangle
Largeshankdiameter
Axialcoolantsupply
DIMENSION RANGEThreaddepth:2xDn:M5–M12Threaddepth:3xDn:M5-M8
THETOOL
– Solidcarbideorbitalthreadmillwithaxialcoolantsupply
– Specialcarbidewithahighwearresist-anceandcuttingedgestrengthandoptimumtoughness
– Shanktoleranceh6foruseinhydraulicexpansion,shrink-fitandprecisionchucks
– High-precisionconcentricity(radialrunout<10µm)foroutstandingthreadqualityandlongtoollife
Watchproductvideo:ScanQRcode
orgodirectlytohttp://goo.gl/aPbPH
Wear-resistantandtoughmicrograincarbide
ORDERING INFORMATION
114 Walter Prototyp – Threading
~DIN 371 6HXDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
TIN designation EP2051305
THL designation EP2051302
d1
Lcl3
l1
DN
l9
P M 2 0,4 45 4 7,6 2,8 2,1 5 3 -M24 -M24
M 2,5 0,45 50 4 9,3 2,8 2,1 5 3 -M2.54 -M2.54
M 3 0,5 56 6 11 3,5 2,7 6 3 -M3 -M3M 4 0,7 63 7 14,8 4,5 3,4 6 3 -M4 -M4M 5 0,8 70 8 20,7 6 4,9 8 3 -M5 -M5M 6 1 80 10 25 6 4,9 8 3 -M6 -M6M 8 1,25 90 12 35 8 6,2 9 3 -M8 -M8M 10 1,5 100 15 39 10 8 11 3 -M10 -M10
4 without thread taper
DIN 376 6HXDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
TIN designation EP2056305
THL designation EP2056302
d1
Lcl1
DN
l9
P M 12 1,75 110 16 - 9 7 10 4 -M12 -M12M 14 2 110 20 - 11 9 12 4 -M14 -M14M 16 2 110 20 - 12 9 12 4 -M16 -M16M 18 2,5 125 25 - 14 11 14 4 -M18 -M18M 20 2,5 140 25 - 16 12 15 4 -M20 -M20M 24 3 160 30 - 18 14,5 17 4 -M24 -M24M 27 3 160 30 - 20 16 19 4 -M27M 30 3,5 180 35 - 22 18 21 4 -M30M 36 4 200 40 - 28 22 25 4 -M36M 42 4,5 200 45 - 32 24 27 5 -M42M 48 5 250 50 - 36 29 32 5 -M48M 56 5,5 250 55 - 40 32 35 5 -M56M 64 6 315 60 - 50 39 42 6 -M64
Paradur® Eco Plus
Paradur® Eco Plus
Paradur® Eco Plus
Paradur® Eco Plus
M
M
M
M
NEW2012
NEW2012
~DIN 371 6GXDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
TIN designation EP2053305
THL designation EP2053302
d1
Lcl3
l1
DN
l9
P M 2 0,4 45 4 7,6 2,8 2,1 5 3 -M24 -M24
M 2,5 0,45 50 4 9,3 2,8 2,1 5 3 -M2.54 -M2.54
M 3 0,5 56 6 11 3,5 2,7 6 3 -M3 -M3M 4 0,7 63 7 14,8 4,5 3,4 6 3 -M4 -M4M 5 0,8 70 8 20,7 6 4,9 8 3 -M5 -M5M 6 1 80 10 25 6 4,9 8 3 -M6 -M6M 8 1,25 90 12 35 8 6,2 9 3 -M8 -M8M 10 1,5 100 15 39 10 8 11 3 -M10 -M10
4 without thread taper
DIN 376 6GXDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
TIN designation EP2058305
THL designation EP2058302
d1
Lcl1
DN
l9
P M 12 1,75 110 16 - 9 7 10 4 -M12 -M12M 14 2 110 20 - 11 9 12 4 -M14 -M14M 16 2 110 20 - 12 9 12 4 -M16 -M16
NEW2012
NEW2012
115Walter Prototyp – Threading
ORDERING INFORMATION
Paradur® Eco Plus
Paradur® Eco Plus
Paradur® Eco Plus
Paradur® Eco Plus
Paradur® Eco Plus/left-hand thread
M
M
M
M
M
~DIN 371 6HXDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
THL designation EP2051312
d1
Lcl3
l1
DN
l9
P M 4 0,7 63 7 14,8 4,5 3,4 6 3 -M4M 5 0,8 70 8 20,7 6 4,9 8 3 -M5M 6 1 80 10 25 6 4,9 8 3 -M6M 8 1,25 90 12 35 8 6,2 9 3 -M8M 10 1,5 100 15 39 10 8 11 3 -M10
DIN 376 6HXDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
THL designation EP2056312
d1
Lcl1
DN
l9
P M 12 1,75 110 16 - 9 7 10 4 -M12M 16 2 110 20 - 12 9 12 4 -M16M 20 2,5 140 25 - 16 12 15 4 -M20M 24 3 160 30 - 18 14,5 17 4 -M24
NEW2012
NEW2012
DIN 371 6HXDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
THL designation EP2051342
d1
Lcl3
l1
DN
l9
P M 8 1,25 90 12 35 8 6,2 9 3 -M8M 10 1,5 100 15 39 10 8 11 3 -M10
DIN 376 6HXDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
THL designation EP2056342
d1
Lcl1
DN
l9
P M 12 1,75 110 16 - 9 7 10 4 -M12M 16 2 110 20 - 12 9 12 4 -M16
~DIN 371 6HXDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
THL designation EP2051382
d1
Lcl3
l1
DN
l9
P M 3 LH 0,5 56 6 11 3,5 2,7 6 3 -M3M 4 LH 0,7 63 7 14,8 4,5 3,4 6 3 -M4M 5 LH 0,8 70 8 20,7 6 4,9 8 3 -M5M 6 LH 1 80 10 25 6 4,9 8 3 -M6M 8 LH 1,25 90 12 35 8 6,2 9 3 -M8M 10 LH 1,5 100 15 39 10 8 11 3 -M10
NEW2012
NEW2012
NEW2012
ORDERING INFORMATION
116 Walter Prototyp – Threading
DIN 376 6HXDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
THL designation EP2056382
d1
Lcl1
DN
l9
P M 12 LH 1,75 110 16 - 9 7 10 4 -M12M 14 LH 2 110 20 - 11 9 12 4 -M14M 16 LH 2 110 20 - 12 9 12 4 -M16M 18 LH 2,5 125 25 - 14 11 14 4 -M18M 20 LH 2,5 140 25 - 16 12 15 4 -M20
Paradur® Eco Plus/left-hand thread
Paradur® Eco Plus/chamfer form E
Paradur® Eco Plus/chamfer form E
Paradur® Eco Plus
M
M
M
MF
~DIN 371 6HXDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
THL designation EP2051362
d1
Lcl3
l1
DN
l9
P M 4 0,7 63 7 14,8 4,5 3,4 6 3 -M4M 5 0,8 70 8 20,7 6 4,9 8 3 -M5M 6 1 80 10 25 6 4,9 8 3 -M6M 8 1,25 90 12 35 8 6,2 9 4 -M8M 10 1,5 100 15 39 10 8 11 4 -M10
DIN 376 6HXDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
THL designation EP2056362
d1
Lcl1
DN
l9
P M 12 1,75 110 16 - 9 7 10 4 -M12M 16 2 110 20 - 12 9 12 4 -M16M 20 2,5 140 25 - 16 12 15 4 -M20M 24 3 160 30 - 18 14,5 17 5 -M24
DIN 374 6HXDN
P mm
l1js16 mm
Lcmm
d1h9
mm
B
h12 mm
l9mm N
THL designation EP2156302
d1
Lcl1
DN
l9
P M 6 0,75 80 10 4,5 3,4 6 3 -M6X0.75M 8 1 90 13 6 4,9 8 3 -M8X1M 10 1 90 12 7 5,5 8 3 -M10X1M 10 1,25 100 15 7 5,5 8 3 -M10X1.25M 12 1 100 13 9 7 10 4 -M12X1M 12 1,25 100 13 9 7 10 4 -M12X1.25M 12 1,5 100 13 9 7 10 4 -M12X1.5M 14 1,5 100 15 11 9 12 4 -M14X1.5M 16 1,5 100 15 12 9 12 4 -M16X1.5M 18 1,5 110 17 14 11 14 4 -M18X1.5M 20 1,5 125 17 16 12 15 4 -M20X1.5M 22 1,5 125 18 18 14,5 17 4 -M22X1.5
NEW2012
NEW2012
NEW2012
NEW2012
117Walter Prototyp – Threading
ORDERING INFORMATION
Paradur® Eco Plus/chamfer form E
Paradur® Eco Plus
Paradur® Eco Plus
Paradur® Eco Plus
MF
MF
UNC
UNC
DIN 374 6HXDN
P mm
l1js16 mm
Lcmm
d1h9
mm
B
h12 mm
l9mm N
THL designation EP2156362
d1
Lcl1
DN
l9
P M 8 1 90 13 6 4,9 8 4 -M8X1M 10 1 90 12 7 5,5 8 4 -M10X1M 12 1,5 100 13 9 7 10 4 -M12X1.5M 14 1,5 100 15 11 9 12 4 -M14X1.5
DIN 374 6HXDN
P mm
l1js16 mm
Lcmm
d1h9
mm
B
h12 mm
l9mm N
THL designation EP2156312
d1
Lcl1
DN
l9
P M 8 1 90 13 6 4,9 8 3 -M8X1M 10 1 90 12 7 5,5 8 3 -M10X1M 10 1,25 100 15 7 5,5 8 3 -M10X1.25M 12 1 100 13 9 7 10 4 -M12X1M 12 1,25 100 13 9 7 10 4 -M12X1.25M 12 1,5 100 13 9 7 10 4 -M12X1.5M 14 1,5 100 15 11 9 12 4 -M14X1.5M 16 1,5 100 15 12 9 12 4 -M16X1.5M 18 1,5 110 17 14 11 14 4 -M18X1.5M 20 1,5 125 17 16 12 15 4 -M20X1.5
~DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
THL designation EP2251302
d1
Lcl3
l1
DN
l9
P No. 2-56 2,184 45 4 8,4 2,8 2,1 5 3 -UNC24
No. 4-40 2,845 56 6 11 3,5 2,7 6 3 -UNC4No. 6-32 3,505 56 6,5 13,7 4 3 6 3 -UNC6No. 8-32 4,166 63 7 17,8 4,5 3,4 6 3 -UNC8No. 10-24 4,826 70 8 20,7 6 4,9 8 3 -UNC101/4-20 6,35 80 10 27,3 7 5,5 8 3 -UNC1/4
4 without thread taper
DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
THL designation EP2256302
d1
Lcl1
DN
l9
P 5/16-18 7,938 90 13 - 6 4,9 8 3 -UNC5/163/8-16 9,525 100 15 - 7 5,5 8 3 -UNC3/81/2-13 12,7 110 18 - 9 7 10 4 -UNC1/25/8-11 15,875 110 20 - 12 9 12 4 -UNC5/8
NEW2012
NEW2012
NEW2012
NEW2012
ORDERING INFORMATION
118 Walter Prototyp – Threading
Paradur® Eco Plus
Paradur® Eco Plus
Paradur® Eco Plus
Paradur® Eco Plus
Paradur® Eco Plus
UNC
UNC
UNF
UNF
UNF
~DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
THL designation EP2251312
d1
Lcl3
l1
DN
l9
P 1/4-20 6,35 80 10 27,3 7 5,5 8 3 -UNC1/4
DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
THL designation EP2256312
d1
Lcl1
DN
l9
P 5/16-18 7,938 90 13 - 6 4,9 8 3 -UNC5/163/8-16 9,525 100 15 - 7 5,5 8 3 -UNC3/81/2-13 12,7 110 18 - 9 7 10 4 -UNC1/25/8-11 15,875 110 20 - 12 9 12 4 -UNC5/83/4-10 19,05 125 25 - 14 11 14 4 -UNC3/4
~DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
THL designation EP2351302
d1
Lcl3
l1
DN
l9
P No. 4-48 2,845 56 6 11 3,5 2,7 6 3 -UNF4No. 6-40 3,505 56 6,5 13,1 4 3 6 3 -UNF6No. 8-36 4,166 63 7 17,4 4,5 3,4 6 3 -UNF8No. 10-32 4,826 70 8 20,7 6 4,9 8 3 -UNF101/4-28 6,35 80 10 25,9 7 5,5 8 3 -UNF1/4
DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
THL designation EP2356302
d1
Lcl1
DN
l9
P 5/16-24 7,938 90 13 - 6 4,9 8 3 -UNF5/163/8-24 9,525 100 15 - 7 5,5 8 3 -UNF3/81/2-20 12,7 100 13 - 9 7 10 4 -UNF1/25/8-18 15,875 100 15 - 12 9 12 4 -UNF5/8
~DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
THL designation EP2351312
d1
Lcl3
l1
DN
l9
P 1/4-28 6,35 80 10 25,9 7 5,5 8 3 -UNF1/4
NEW2012
NEW2012
NEW2012
NEW2012
NEW2012
119Walter Prototyp – Threading
ORDERING INFORMATION
Paradur® Eco Plus
Paradur® Eco Plus
Paradur® Eco Plus
Paradur® Eco Plus
Paradur® Eco Plus
UNF
G
UNC
UNC
UNC
DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
THL designation EP2356312
d1
Lcl1
DN
l9
P 5/16-24 7,938 90 12 - 6 4,9 8 3 -UNF5/163/8-24 9,525 100 15 - 7 5,5 8 3 -UNF3/81/2-20 12,7 100 13 - 9 7 10 4 -UNF1/25/8-18 15,875 100 15 - 12 9 12 4 -UNF5/8
DIN 5156 G-X DN-PNom
DNmm
Threads per inch
l1js16 mm
Lcmm
d1h9
mm
B
h12 mm
l9mm N
THL designation EP2456302
d1
Lcl1
DN
l9
P G 1/8 9,728 28 90 12 7 5,5 8 3 -G1/8G 1/4 13,157 19 100 15 11 9 12 4 -G1/4G 3/8 16,662 19 100 15 12 9 12 4 -G3/8G 1/2 20,955 14 125 18 16 12 15 4 -G1/2G 5/8 22,911 14 125 18 18 14,5 17 4 -G5/8G 3/4 26,441 14 140 20 20 16 19 5 -G3/4G 1 33,249 11 160 22 25 20 23 5 -G1
DIN/ANSI - 2B DN-PNom
DNinch
l1js16 inch
Lcinch
l3±1
inch
d1h9
inch
B
h12 inch
l9inch N
THL designation AEP2251302
d1
Lcl3
l1
DN
l9
P No. 4-40 0.112 2.205 0.236 0.437 0.141 0.110 3/16 3 -UNC4No. 6-32 0.138 2.205 0.256 0.539 0.141 0.110 3/16 3 -UNC6No. 8-32 0.164 2.480 0.276 0.701 0.168 0.131 1/4 3 -UNC8No.10-24 0.190 2.756 0.315 0.831 0.194 0.152 1/4 3 -UNC101/4-20 0.250 3.150 0.394 1.075 0.255 0.191 5/16 3 -UNC1/45/16-18 0.313 3.543 0.472 1.378 0.318 0.238 3/8 3 -UNC5/163/8-16 0.375 3.937 0.591 1.535 0.381 0.286 7/16 3 -UNC3/8
DIN/ANSI - 2B DN-PNom
DNinch
l1js16 inch
Lcinch
l3±1
inch
d1h9
inch
B
h12 inch
l9inch N
THL designation AEP2256302
d1
Lcl3
l1
DN
l9
P 1/2-13 0.500 4.331 0.709 - 0.367 0.275 7/16 4 -UNC1/25/8-11 0.625 4.331 0.787 - 0.480 0.360 9/16 4 -UNC5/83/4-10 0.750 4.921 0.984 - 0.590 0.442 11/16 4 -UNC3/4
DIN/ANSI - 2B DN-PNom
DNinch
l1js16 inch
Lcinch
l3±1
inch
d1h9
inch
B
h12 inch
l9inch N
THL designation AEP2251312
d1
Lcl3
l1
DN
l9
P 1/4-20 0.250 3.150 0.394 1.075 0.255 0.191 5/16 3 -UNC1/45/16-18 0.313 3.543 0.472 1.378 0.318 0.238 3/8 3 -UNC5/163/8-16 0.375 3.937 0.591 1.535 0.318 0.286 7/16 3 -UNC3/8
NEW2012
NEW2012
NEW2012
NEW2012
NEW2012
ORDERING INFORMATION
120 Walter Prototyp – Threading
Paradur® Eco Plus
Paradur® Eco Plus
Paradur® Eco Plus
UNC
UNF
UNF
DIN/ANSI - 2B DN-PNom
DNinch
l1js16 inch
Lcinch
l3±1
inch
d1h9
inch
B
h12 inch
l9inch N
THL designation AEP2256312
d1
Lcl1
DN
l9
P 1/2-13 0.500 4.331 0.709 - 0.367 0.275 7/16 4 -UNC-1/25/8-11 0.625 4.331 0.787 - 0.480 0.360 9/16 4 -UNC-5/83/4-10 0.750 4.921 0.984 - 0.590 0.442 11/16 4 -UNC-3/4
DIN/ANSI - 2B DN-PNom
DNinch
l1js16 inch
Lcinch
l3±1
inch
d1h9
inch
B
h12 inch
l9inch N
THL designation AEP2356312
d1
Lcl1
DN
l9
P 7/16-20 0.438 3.937 0.591 - 0.323 0.242 13/32 3 -UNF7/161/2-20 0.500 3.937 0.512 - 0.367 0.275 7/16 4 -UNF-1/25/8-18 0.625 3.937 0.591 - 0.480 0.360 9/16 4 -UNF5/183/4-10 0.750 4.331 0.669 - 0.590 0.442 11/16 4 -UNF3/4
DIN/ANSI - 2B DN-PNom
DNinch
l1js16 inch
Lcinch
l3±1
inch
d1h9
inch
B
h12 inch
l9inch N
THL designation AEP2356302
d1
Lcl1
DN
l9
P 7/16-20 0.438 3.937 0.591 - 0.323 0.242 13/32 3 -UNF7/161/2-20 0.500 3.937 0.512 - 0.367 0.275 7/16 4 -UNF1/25/8-18 0.625 3.937 0.591 - 0.480 0.360 9/16 4 -UNF5/83/4-10 0.750 4.331 0.669 0.590 0.442 11/16 4 -UNF3/4
Paradur® Eco Plus UNF
DIN/ANSI - 2B DN-PNom
DNinch
l1js16 inch
Lcinch
l3±1
inch
d1h9
inch
B
h12 inch
l9inch N
THL designation AEP2351302
d1
l3l1
DN
l9
P
Lc
No. 6-40 0.138 2.205 0.256 0.516 0.141 0.110 3/16 3 -UNF6No. 10-32 0.190 2.756 0.315 0.791 0.194 0.152 1/4 3 -UNF101/4-28 0.250 3.150 0.394 1.020 0.255 0.191 5/16 3 -UNF1/45/16-24 0.313 3.543 0.472 1.378 0.318 0.238 3/8 3 -UNF5/163/8-24 0.375 3.937 0.472 1.535 0.381 0.286 7/16 3 -UNF3/8
Paradur® Eco Plus UNF
DIN/ANSI - 2B DN-PNom
DNinch
l1js16 inch
Lcinch
l3±1
inch
d1h9
inch
B
h12 inch
l9inch N
THL designation AEP2351312
d1
Lcl3
l1
DN
l9
P 1/4-28 0.250 3.150 0.394 1.020 0.255 0.191 5/16 3 -UNF1/45/16-24 0.313 3.543 0.472 1.378 0.318 0.238 3/8 3 -UNF5/163/8-24 0.375 3.937 0.472 1.535 0.381 0.286 7/16 3 -UNF3/8
NEW2012
NEW2012
NEW2012
NEW2012
NEW2012
121Walter Prototyp – Threading
ORDERING INFORMATION
Paradur® X·pert P
Paradur® X·pert P
M
M
DIN 371 ISO2/6HDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P20519
TIN designation P2051905
d1
Lcl3
l1
DN
l9
P M 1,6 0,35 40 6 - 2,5 2,1 5 2 -M1.61
M 2 0,4 45 4 9 2,8 2,1 5 3 -M2 -M2M 2,2 0,45 45 4 12 2,8 2,1 5 3 -M2.2M 2,5 0,45 50 4 12,5 2,8 2,1 5 3 -M2.5 -M2.5M 2,6 0,45 50 4 12,5 2,8 2,1 5 3 -M2.6M 3 0,5 56 6 18 3,5 2,7 6 3 -M3 -M3M 3,5 0,6 56 6,5 20 4 3 6 3 -M3.5 -M3.5M 4 0,7 63 7 21 4,5 3,4 6 3 -M4 -M4M 4,5 0,75 70 8 25 6 4,9 8 3 -M4.5M 5 0,8 70 8 25 6 4,9 8 3 -M5 -M5M 6 1 80 10 30 6 4,9 8 3 -M6 -M6M 7 1 80 10 30 7 5,5 8 3 -M7M 8 1,25 90 12 35 8 6,2 9 3 -M8 -M8M 10 1,5 100 15 39 10 8 11 3 -M10 -M10
1 without reduced neck after the thread
DIN 376 ISO2/6HDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P20569
TIN designation P2056905
d1
Lcl1
DN
l9
P M 4 0,7 63 7 - 2,8 2,1 5 3 -M4M 5 0,8 70 8 - 3,5 2,7 6 3 -M5M 6 1 80 10 - 4,5 3,4 6 3 -M6M 8 1,25 90 12 - 6 4,9 8 3 -M8M 9 1,25 90 13 - 7 5,5 8 3 -M9M 10 1,5 100 15 - 7 5,5 8 3 -M10M 11 1,5 100 15 - 8 6,2 9 3 -M11M 12 1,75 110 16 - 9 7 10 4 -M12 -M12M 14 2 110 20 - 11 9 12 4 -M14 -M14M 16 2 110 20 - 12 9 12 4 -M16 -M16M 18 2,5 125 25 - 14 11 14 4 -M18 -M18M 20 2,5 140 25 - 16 12 15 4 -M20 -M20M 22 2,5 140 25 - 18 14,5 17 4 -M22M 24 3 160 30 - 18 14,5 17 4 -M24 -M24M 27 3 160 30 - 20 16 19 4 -M27M 30 3,5 180 35 - 22 18 21 4 -M30 -M30M 33 3,5 180 35 - 25 20 23 4 -M33M 36 4 200 40 - 28 22 25 4 -M36M 39 4 200 40 - 32 24 27 4 -M39M 42 4,5 200 45 - 32 24 27 4 -M42M 45 4,5 220 45 - 36 29 32 4 -M45M 48 5 250 50 - 36 29 32 4 -M48M 52 5 250 50 - 40 32 35 5 -M52M 56 5,5 250 55 - 40 32 35 5 -M56M 60 5,5 280 55 - 45 35 38 5 -M60M 64 6 315 60 - 50 39 42 6 -M64
NEW2012
NEW2012
ORDERING INFORMATION
122 Walter Prototyp – Threading
DIN 371 ISO3/6GDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P20539
TIN designation P2053905
d1
Lcl3
l1
DN
l9
P M 2 0,4 45 4 9 2,8 2,1 5 3 -M2M 2,3 0,4 45 4 12 2,8 2,1 5 3 -M2.3M 2,5 0,45 50 4 12,5 2,8 2,1 5 3 -M2.5 -M2.5M 3 0,5 56 6 18 3,5 2,7 6 3 -M3 -M3M 3,5 0,6 56 6,5 20 4 3 6 3 -M3.5M 4 0,7 63 7 21 4,5 3,4 6 3 -M4 -M4M 5 0,8 70 8 25 6 4,9 8 3 -M5 -M5M 6 1 80 10 30 6 4,9 8 3 -M6 -M6M 8 1,25 90 12 35 8 6,2 9 3 -M8 -M8M 10 1,5 100 15 39 10 8 11 3 -M10 -M10
DIN 376 ISO3/6GDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P20589
TIN designation P2058905
d1
Lcl1
DN
l9
P M 5 0,8 70 8 - 3,5 2,7 6 3 -M5M 6 1 80 10 - 4,5 3,4 6 3 -M6M 8 1,25 90 13 - 6 4,9 8 3 -M8M 10 1,5 100 15 - 7 5,5 8 3 -M10M 12 1,75 110 16 - 9 7 10 4 -M12 -M12M 14 2 110 20 - 11 9 12 4 -M14M 16 2 110 20 - 12 9 12 4 -M16 -M16
Paradur® X·pert P
Paradur® X·pert P
Paradur® X·pert P
Paradur® X·pert P
M
M
M
M
DIN 371 7GDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P20549
TIN designation P2054905
d1
Lcl3
l1
DN
l9
P M 2 0,4 45 4 9 2,8 2,1 5 3 -M2M 2,5 0,45 50 4 12,5 2,8 2,1 5 3 -M2.5M 3 0,5 56 6 18 3,5 2,7 6 3 -M3 -M3M 4 0,7 63 7 21 4,5 3,4 6 3 -M4 -M4M 5 0,8 70 8 25 6 4,9 8 3 -M5 -M5M 6 1 80 10 30 6 4,9 8 3 -M6 -M6M 8 1,25 90 12 35 8 6,2 9 3 -M8 -M8M 10 1,5 100 15 39 10 8 11 3 -M10 -M10
DIN 376 7GDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P20599
TIN designation P2059905
d1
Lcl1
DN
l9
P M 8 1,25 90 12 - 6 4,9 8 3 -M8M 10 1,5 110 15 - 7 5,5 8 3 -M10M 12 1,75 110 16 - 9 7 10 4 -M12 -M12M 16 2 110 20 - 12 9 12 4 -M16 -M16M 20 2,5 140 25 - 16 12 15 4 -M20 -M20M 24 3 160 30 - 18 14,5 17 4 -M24 -M24
NEW2012
NEW2012
NEW2012
NEW2012
123Walter Prototyp – Threading
ORDERING INFORMATION
Paradur® X·pert P
Paradur® X·pert P/left-hand thread
Paradur® X·pert P/left-hand thread
Paradur® X·pert P/extra long series
M
M
M
M
DIN 371 ISO1/4HDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P20509
d1
Lcl3
l1
DN
l9
P M 2 0,4 45 4 9 2,8 2,1 5 3 -M2M 2,5 0,45 50 4 12,5 2,8 2,1 5 3 -M2.5M 3 0,5 56 6 18 3,5 2,7 6 3 -M3M 4 0,7 63 7 21 4,5 3,4 6 3 -M4M 5 0,8 70 8 25 6 4,9 8 3 -M5M 6 1 80 10 30 6 4,9 8 3 -M6M 7 1 80 10 30 7 5,5 8 3 -M7M 8 1,25 90 12 35 8 6,2 9 3 -M8M 10 1,5 100 15 39 10 8 11 3 -M10
DIN 371 ISO2/6HDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P205198
d1
Lcl3
l1
DN
l9
P M 3 LH 0,5 56 6 18 3,5 2,7 6 3 -M3M 4 LH 0,7 63 7 21 4,5 3,4 6 3 -M4M 5 LH 0,8 70 8 25 6 4,9 8 3 -M5M 6 LH 1 80 10 30 6 4,9 8 3 -M6M 8 LH 1,25 90 12 35 8 6,2 9 3 -M8M 10 LH 1,5 100 15 39 10 8 11 3 -M10
DIN 376 ISO2/6HDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P205698
d1
Lcl1
DN
l9
P M 12 LH 1,75 110 16 - 9 7 10 4 -M12M 14 LH 2 110 20 - 11 9 12 4 -M14M 16 LH 2 110 20 - 12 9 12 4 -M16M 20 LH 2,5 140 25 - 16 12 15 4 -M20M 24 LH 3 160 30 - 18 14,5 17 4 -M24M 30 LH 3,5 180 35 - 22 18 21 4 -M30
~DIN 371 ISO2/6HDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation P2051935
d1
Lcl3
l1
DN
l9
P M 3 0,5 125 6 18 3,5 2,7 6 3 -M3M 4 0,7 125 7 21 4,5 3,4 6 3 -M4M 5 0,8 140 8 25 6 4,9 8 3 -M5M 6 1 160 10 30 6 4,9 8 3 -M6M 8 1,25 180 13 35 8 6,2 9 3 -M8M 10 1,5 200 15 39 10 8 11 3 -M10
NEW2012
NEW2012
NEW2012
NEW2012
ORDERING INFORMATION
124 Walter Prototyp – Threading
Paradur® X·pert P/extra long series
Paradur® X·pert P/long series
Paradur® X·pert P/long series
Paradur® X·pert AZ/interrupted teeth
Paradur® X·pert AZ/interrupted teeth
M
M
M
M
M
~DIN 376 ISO2/6HDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation P2056935
Lcl1
DN
l9
P
d1
M 8 1,25 180 12 - 6 4,9 8 3 -M8M 10 1,5 200 15 - 7 5,5 8 3 -M10M 12 1,75 220 16 - 9 7 10 4 -M12M 14 2 220 20 - 11 9 12 4 -M14M 16 2 220 20 - 12 9 12 4 -M16M 18 2,5 250 25 - 14 11 14 4 -M18M 20 2,5 280 25 - 16 12 15 4 -M20
~DIN 371 ISO2/6HDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P205183
THL designation P2051832
d1
Lcl3
l1
DN
l9
P M 3 0,5 112 6 18 3,5 2,7 6 3 -M3 -M3M 4 0,7 112 7 21 4,5 3,4 6 3 -M4 -M4M 5 0,8 125 8 25 6 4,9 8 3 -M5 -M5M 6 1 125 10 30 6 4,9 8 3 -M6 -M6M 8 1,25 140 13 40 8 6,2 9 3 -M8 -M8M 10 1,5 160 15 50 10 8 11 3 -M10 -M10
~DIN 376 ISO2/6HDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P205683
THL designation P2056832
Lcl1
DN
l9
P
d1
M 8 1,25 140 13 - 6 4,9 8 3 -M8 -M8M 10 1,5 160 15 - 7 5,5 8 3 -M10 -M10M 12 1,75 180 16 - 9 7 10 3 -M12 -M12M 14 2 180 20 - 11 9 12 3 -M14 -M14M 16 2 200 20 - 12 9 12 3 -M16 -M16M 20 2,5 224 25 - 16 12 15 4 -M20 -M20
DIN 371 ISO2/6HDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P40519
d1
Lcl3
l1
DN
l9
P M 3 0,5 56 6 18 3,5 2,7 6 3 -M3M 4 0,7 63 7 21 4,5 3,4 6 3 -M4M 5 0,8 70 8 25 6 4,9 8 3 -M5M 6 1 80 10 30 6 4,9 8 3 -M6M 8 1,25 90 12 35 8 6,2 9 3 -M8M 10 1,5 100 15 39 10 8 11 3 -M10
DIN 376 ISO2/6HDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P40569
d1
l9Lc
l1
DN
P M 12 1,75 110 16 - 9 7 10 4 -M12
NEW2012
NEW2012
NEW2012
NEW2012
NEW2012
125Walter Prototyp – Threading
ORDERING INFORMATION
Paradur® X·pert P
Paradur® X·pert P
M
M
DIN 371 ISO2/6HDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P21519
d1
Lcl3
l1
DN
l9
P M 2,5 0,35 50 4 12,5 2,8 2,1 5 3 -M2.5X0.35M 3 0,25 56 6 18 3,5 2,7 6 3 -M3X0.25M 3 0,35 56 6 18 3,5 2,7 6 3 -M3X0.35M 4 0,35 63 7 21 4,5 3,4 6 3 -M4X0.35M 4 0,5 63 7 21 4,5 3,4 6 3 -M4X0.5M 4,5 0,5 70 8 25 6 4,9 8 3 -M4.5X0.5M 5 0,5 70 8 25 6 4,9 8 3 -M5X0.5M 6 0,5 80 10 30 6 4,9 8 3 -M6X0.5M 6 0,75 80 10 30 6 4,9 8 3 -M6X0.75M 7 0,75 80 10 30 7 5,5 8 3 -M7X0.75M 8 1 90 12 35 8 6,2 9 3 -M8X1M 10 1 90 12 39 10 8 11 3 -M10X1
DIN 374 ISO2/6HDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P21569
TIN designation P2156905
d1
Lcl1
DN
l9
P M 8 0,75 80 10 - 6 4,9 8 3 -M8X0.75M 8 1 90 12 - 6 4,9 8 3 -M8X1 -M8X1M 9 1 90 13 - 7 5,5 8 3 -M9X1M 10 0,75 90 12 - 7 5,5 8 3 -M10X0.75M 10 1 90 12 - 7 5,5 8 3 -M10X1 -M10X1M 10 1,25 100 15 - 7 5,5 8 3 -M10X1.25 -M10X1.25M 12 1 100 13 - 9 7 10 4 -M12X1 -M12X1M 12 1,25 100 13 - 9 7 10 4 -M12X1.25 -M12X1.25M 12 1,5 100 13 - 9 7 10 4 -M12X1.5 -M12X1.5M 14 1 100 15 - 11 9 12 4 -M14X1M 14 1,25 100 15 - 11 9 12 4 -M14X1.25M 14 1,5 100 15 - 11 9 12 4 -M14X1.5 -M14X1.5M 16 1 100 15 - 12 9 12 4 -M16X1M 16 1,5 100 15 - 12 9 12 4 -M16X1.5 -M16X1.5M 18 1 110 17 - 14 11 14 4 -M18X1M 18 1,5 110 17 - 14 11 14 4 -M18X1.5 -M18X1.5M 20 1 125 17 - 16 12 15 4 -M20X1M 20 1,5 125 17 - 16 12 15 4 -M20X1.5 -M20X1.5M 20 2 140 25 - 16 12 15 4 -M20X2M 22 1 125 18 - 18 14,5 17 4 -M22X1M 22 1,5 125 18 - 18 14,5 17 4 -M22X1.5 -M22X1.5M 22 2 140 20 - 18 14,5 17 4 -M22X2M 24 1 140 20 - 18 14,5 17 5 -M24X1M 24 1,5 140 20 - 18 14,5 17 5 -M24X1.5M 24 2 140 20 - 18 14,5 17 5 -M24X2M 26 1,5 140 20 - 18 14,5 17 5 -M26X1.5M 27 1,5 140 20 - 20 16 19 5 -M27X1.5M 27 2 140 20 - 20 16 19 5 -M27X2M 30 1,5 150 20 - 22 18 21 5 -M30X1.5M 30 2 150 20 - 22 18 21 5 -M30X2M 32 1,5 150 20 - 22 18 21 5 -M32X1.5M 33 1,5 160 22 - 25 20 23 5 -M33X1.5M 33 2 160 22 - 25 20 23 5 -M33X2M 36 1,5 170 22 - 28 22 25 5 -M36X1.5M 36 2 170 22 - 28 22 25 5 -M36X2M 36 3 200 30 - 28 22 25 5 -M36X3M 38 1,5 170 22 - 28 22 25 5 -M38X1.5M 39 2 170 22 - 32 24 27 5 -M39X2M 39 3 200 33 - 32 24 27 5 -M39X3M 40 1,5 170 22 - 32 24 27 5 -M40X1.5M 42 1,5 170 22 - 32 24 27 6 -M42X1.5M 42 2 170 22 - 32 24 27 6 -M42X2
Continued
NEW2012
NEW2012
ORDERING INFORMATION
126 Walter Prototyp – Threading
Paradur® X·pert P
Paradur® X·pert P
Paradur® X·pert P
Paradur® X·pert P
M
MF
UNC
UNC
DIN 374 ISO2/6HDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P21569
TIN designation P2156905
d1
Lcl1
DN
l9
P M 42 3 200 33 - 32 24 27 6 -M42X3M 45 1,5 180 22 - 36 29 32 6 -M45X1.5M 45 2 180 24 - 36 29 32 6 -M45X2M 48 1,5 190 22 - 36 29 32 6 -M48X1.5M 48 2 190 24 - 36 29 32 6 -M48X2M 48 3 225 36 - 36 29 32 6 -M48X3M 52 2 190 26 - 40 32 35 6 -M52X2M 52 3 225 36 - 40 32 35 6 -M52X3
Continued
DIN 374 ISO3/6GDN
P mm
l1js16 mm
Lcmm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P21589
TIN designation P2158905
d1
Lcl1
DN
l9
P M 8 1 90 12 6 4,9 8 3 -M8X1 -M8X1M 10 1 90 12 7 5,5 8 3 -M10X1 -M10X1M 12 1 100 13 9 7 10 4 -M12X1 -M12X1M 12 1,5 100 13 9 7 10 4 -M12X1.5 -M12X1.5M 14 1,5 100 15 11 9 12 4 -M14X1.5 -M14X1.5M 16 1,5 100 15 12 9 12 4 -M16X1.5 -M16X1.5M 18 1,5 110 17 14 11 14 4 -M18X1.5 -M18X1.5M 20 1,5 125 17 16 12 15 4 -M20X1.5
DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P22519
d1
Lcl3
l1
DN
l9
P No. 2-56 2,184 45 4 12 2,8 2,1 5 3 -UNC2No. 3-48 2,515 50 4 12,5 2,8 2,1 5 3 -UNC3No. 4-40 2,845 56 6 18 3,5 2,7 6 3 -UNC4No. 5-40 3,175 56 6 18 3,5 2,7 6 3 -UNC5No. 6-32 3,505 56 6,5 20 4 3 6 3 -UNC6No. 8-32 4,166 63 7 21 4,5 3,4 6 3 -UNC8No. 10-24 4,826 70 8 25 6 4,9 8 3 -UNC10No. 12-24 5,486 80 10 30 6 4,9 8 3 -UNC121/4-20 6,35 80 10 30 7 5,5 8 3 -UNC1/45/16-18 7,938 90 12 35 8 6,2 9 3 -UNC5/163/8-16 9,525 100 15 39 10 8 11 3 -UNC3/8
DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P22569
d1
Lcl1
DN
l9
P 7/16-14 11,113 100 15 - 8 6,2 9 3 -UNC7/161/2-13 12,7 110 18 - 9 7 10 4 -UNC1/29/16-12 14,288 110 20 - 11 9 12 4 -UNC9/165/8-11 15,875 110 20 - 12 9 12 4 -UNC5/83/4-10 19,05 125 25 - 14 11 14 4 -UNC3/47/8-9 22,225 140 25 - 18 14,5 17 4 -UNC7/81-8 25,4 160 30 - 18 14,5 17 4 -UNC11 1/8-7 28,575 180 35 - 22 18 21 4 -UNC1.1/81 1/4-7 31,75 180 35 - 22 18 21 4 -UNC1.1/41 1/2-6 38,1 200 40 - 28 22 25 4 -UNC1.1/2
NEW2012
NEW2012
NEW2012
NEW2012
127Walter Prototyp – Threading
ORDERING INFORMATION
Paradur® X·pert P
Paradur® X·pert P
Paradur® X·pert P
Paradur® X·pert P
UNC
UNC
UNF
UNF
DIN 2184-1 3B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P22509
d1
Lcl3
l1
DN
l9
P No. 2-56 2,184 45 4 12 2,8 2,1 5 3 -UNC2No. 3-48 2,515 50 4 12,5 2,8 2,1 5 3 -UNC3No. 4-40 2,845 56 6 18 3,5 2,7 6 3 -UNC4No. 6-32 3,505 56 6,5 20 4 3 6 3 -UNC6No. 8-32 4,166 63 7 21 4,5 3,4 6 3 -UNC8No. 10-24 4,826 70 8 25 6 4,9 8 3 -UNC101/4-20 6,35 80 10 30 7 5,5 8 3 -UNC1/45/16-18 7,938 90 12 35 8 6,2 9 3 -UNC5/163/8-16 9,525 100 15 39 10 8 11 3 -UNC3/8
DIN 2184-1 3B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P22559
d1
Lcl1
DN
l9
P 5/16-18 7,938 90 13 - 6 4,9 8 3 -UNC5/163/8-16 9,525 100 15 - 7 5,5 8 3 -UNC3/87/16-14 11,113 100 15 - 8 6,2 9 3 -UNC7/161/2-13 12,7 110 18 - 9 7 10 4 -UNC1/29/16-12 14,288 110 20 - 11 9 12 4 -UNC9/165/8-11 15,875 110 20 - 12 9 12 4 -UNC5/83/4-10 19,05 125 25 - 14 11 14 4 -UNC3/47/8-9 22,225 140 25 - 18 14,5 17 4 -UNC7/81-8 25,4 160 30 - 18 14,5 17 4 -UNC11 1/4-7 31,75 180 35 - 22 18 21 4 -UNC1.1/4
DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P23519
TIN designation P2351905
d1
Lcl3
l1
DN
l9
P No. 1-72 1,854 45 4 9 2,8 2,1 5 3 -UNF1No. 2-64 2,184 45 4 12 2,8 2,1 5 3 -UNF2No. 3-56 2,515 50 4 12,5 2,8 2,1 5 3 -UNF3No. 4-48 2,845 56 6 18 3,5 2,7 6 3 -UNF4No. 5-44 3,175 56 6 18 3,5 2,7 6 3 -UNF5No. 6-40 3,505 56 6,5 20 4 3 6 3 -UNF6No. 8-36 4,166 63 7 21 4,5 3,4 6 3 -UNF8No. 10-32 4,826 70 8 25 6 4,9 8 3 -UNF10 -UNF10No. 12-28 5,486 80 10 30 6 4,9 8 3 -UNF121/4-28 6,35 80 10 30 7 5,5 8 3 -UNF1/4 -UNF1/4
DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P23569
TIN designation P2356905
d1
Lcl1
DN
l9
P 5/16-24 7,938 90 13 6 4,9 8 3 -UNF5/16 -UNF5/163/8-24 9,525 100 15 7 5,5 8 3 -UNF3/8 -UNF3/87/16-20 11,113 100 15 8 6,2 9 3 -UNF7/16 -UNF7/161/2-20 12,7 100 13 9 7 10 4 -UNF1/2 -UNF1/29/16-18 14,288 100 15 11 9 12 4 -UNF9/16 -UNF9/165/8-18 15,875 100 15 12 9 12 4 -UNF5/8 -UNF5/83/4-16 19,05 110 17 14 11 14 4 -UNF3/4 -UNF3/47/8-14 22,225 125 18 18 14,5 17 4 -UNF7/8 -UNF7/81-12 25,4 140 20 18 14,5 17 5 -UNF11 1/8-12 28,575 150 20 22 18 21 5 -UNF1.1/81 1/4-12 31,75 150 20 22 18 21 5 -UNF1.1/41 3/8-12 34,925 170 22 28 22 25 5 -UNF1.3/81 1/2-12 38,1 170 22 28 22 25 5 -UNF1.1/2
NEW2012
NEW2012
NEW2012
NEW2012
ORDERING INFORMATION
128 Walter Prototyp – Threading
Paradur® X·pert P
Paradur® X·pert P
Paradur® X·pert P
Paradur® X·pert P
UNEF
UN - 8
G
BSW
DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P235692
d1
Lcl1
DN
l9
P 1/4-32 6,35 80 10 4,5 3,4 6 3 -UNEF1/45/16-32 7,938 90 13 6 4,9 8 3 -UNEF5/163/8-32 9,525 90 12 7 5,5 8 3 -UNEF3/87/16-28 11,113 90 15 8 6,2 9 3 -UNEF7/161/2-28 12,7 100 13 9 7 10 4 -UNEF1/29/16-24 14,288 100 15 11 9 12 4 -UNEF9/165/8-24 15,875 100 15 12 9 12 4 -UNEF5/811/16-24 17,462 110 17 14 11 14 4 -UNEF11/163/4-20 19,05 110 17 14 11 14 4 -UNEF3/47/8-20 22,225 125 18 18 14,5 17 4 -UNEF7/81-20 25,4 140 20 18 14,5 17 5 -UNEF1
DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P265676
d1
Lcl1
DN
l9
P 1 1/8-8 28,575 180 30 22 18 21 5 -UN1.1/81 1/4-8 31,75 180 30 22 18 21 5 -UN1.1/41 3/8-8 34,925 200 30 28 22 25 5 -UN1.3/81 1/2-8 38,1 200 30 28 22 25 5 -UN1.1/21 5/8-8 41,275 200 33 32 24 27 6 -UN1.5/81 3/4-8 44,45 200 33 36 29 32 6 -UN1.3/41 7/8-8 47,625 225 36 36 29 32 6 -UN1.7/82-8 50,8 225 36 40 32 35 6 -UN22 1/4-8 57,15 250 36 45 35 38 6 -UN2.1/4
DIN 5156 DNNom
DNmm
Threads per inch
l1js16 mm
Lcmm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P24569
TIN designation P2456905
d1
Lcl1
DN
l9
P G 1/8 9,728 28 90 12 7 5,5 8 3 -G1/8 -G1/8G 1/4 13,157 19 100 15 11 9 12 4 -G1/4 -G1/4G 3/8 16,662 19 100 15 12 9 12 4 -G3/8 -G3/8G 1/2 20,955 14 125 18 16 12 15 4 -G1/2 -G1/2G 5/8 22,911 14 125 18 18 14,5 17 4 -G5/8G 3/4 26,441 14 140 20 20 16 19 5 -G3/4 -G3/4G 7/8 30,201 14 150 20 22 18 21 5 -G7/8G 1 33,249 11 160 22 25 20 23 5 -G1 -G1G 1 1/8 37,897 11 170 22 28 22 25 5 -G1.1/8G 1 1/4 41,91 11 170 22 32 24 27 6 -G1.1/4G 1 1/2 47,803 11 190 24 36 29 32 6 -G1.1/2G 1 3/4 53,746 11 190 26 40 32 35 6 -G1.3/4G 2 59,614 11 220 28 45 35 38 6 -G2
DIN 2184-1 mc DNNom
DNmm
Threads per inch
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P28519
d1
Lcl3
l1
DN
l9
P 1/8-40 3,175 40 56 6 18 3,5 2,7 6 3 -BSW1/83/16-24 4,763 24 70 8 25 6 4,9 8 3 -BSW3/161/4-20 6,35 20 80 10 30 7 5,5 8 3 -BSW1/45/16-18 7,938 18 90 12 35 8 6,2 9 3 -BSW5/163/8-16 9,525 16 100 15 39 10 8 11 3 -BSW3/8
NEW2012
NEW2012
NEW2012
NEW2012
129Walter Prototyp – Threading
ORDERING INFORMATION
Paradur® X·pert P
Paradur® X·pert P
Paradur® X·pert P
BSW
EgM
EgM
DIN 2184-1 mc DNNom
DNmm
Threads per inch
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P28569
d1
Lcl1
DN
l9
P 7/16-14 11,113 14 100 15 - 8 6,2 9 3 -BSW7/161/2-12 12,7 12 110 18 - 9 7 10 3 -BSW1/25/8-11 15,875 11 110 20 - 12 9 12 4 -BSW5/83/4-10 19,05 10 125 25 - 14 11 14 4 -BSW3/47/8-9 22,225 9 140 25 - 18 14,5 17 4 -BSW7/81-8 25,4 8 160 30 - 18 14,5 17 4 -BSW1
DIN 40 435 6H mod DNNom
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P205099
d1
Lcl3
l1
DN
l9
P EG M 2,5 0,45 56 6 18 3,5 2,7 6 3 -EGM2.5EG M 3 0,5 63 7 21 4,5 3,4 6 3 -EGM3EG M 4 0,7 70 8 25 6 4,9 8 3 -EGM4EG M 5 0,8 80 10 30 6 4,9 8 3 -EGM5EG M 6 1 90 12 35 8 6,2 9 3 -EGM6EG M 8 1,25 100 15 39 10 8 11 3 -EGM8
DIN 40 435 6H mod DNNom
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P205599
d1
Lcl1
DN
l9
P EG M 10 1,5 100 13 - 9 7 10 4 -EGM10EG M 12 1,75 110 20 - 11 9 12 4 -EGM12EG M 14 2 110 20 - 12 9 12 4 -EGM14EG M 16 2 125 25 - 14 11 14 4 -EGM16EG M 20 2,5 160 25 - 18 14,5 17 4 -EGM20EG M 24 3 160 30 - 20 16 19 4 -EGM24
NEW2012
NEW2012
NEW2012
Paradur® X·pert P
Paradur® X·pert P
EgMF
EgUNC
DIN 40 435 6H mod DNNom
P mm
l1js16 mm
Lcmm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P215599
d1
Lcl1
DN
l9
P EG M 8 1 90 12 7 5,5 8 3 -EGM8X1EG M 10 1 100 13 9 7 10 3 -EGM10X1EG M 12 1,5 100 15 11 9 12 4 -EGM12X1.5EG M 14 1,5 100 15 12 9 12 4 -EGM14X1.5EG M 16 1,5 110 17 14 11 14 4 -EGM16X1.5
DIN 2184-1 3B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P225099
d1
Lcl3
l1
DN
l9
P EG no. 6-32 4,536 70 8 25 6 4,9 8 3 -EGUNC6EG no. 8-32 5,197 80 10 30 6 4,9 8 3 -EGUNC8EG no. 10-24 6,201 80 10 30 7 5,5 8 3 -EGUNC10EG 1/4-20 8 90 12 35 8 6,2 9 3 -EGUNC1/4
NEW2012
NEW2012
ORDERING INFORMATION
130 Walter Prototyp – Threading
Paradur® X·pert P
Paradur® X·pert P
EgUNF
EgUNF
DIN 2184-1 3B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P235099
d1
Lcl3
l1
DN
l9
P EG no. 6-40 4,33 70 8 25 6 4,9 8 3 -EGUNF6EG no. 8-36 5,083 80 10 30 6 4,9 8 3 -EGUNF8EG no. 10-32 5,857 80 10 30 6 4,9 8 3 -EGUNF10EG 1/4-28 7,528 90 12 35 8 6,2 9 3 -EGUNF1/4
DIN 2184-1 3B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P235599
d1
Lcl1
DN
l9
P EG 5/16-24 9,313 90 12 - 7 5,5 8 3 -EGUNF5/16EG 3/8-24 10,9 90 15 - 8 6,2 9 3 -EGUNF3/8EG 7/16-20 12,763 100 13 - 9 7 10 4 -EGUNF7/16EG 1/2-20 14,35 100 15 - 11 9 12 4 -EGUNF1/2
NEW2012
NEW2012
131Walter Prototyp – Threading
ORDERING INFORMATION
DIN 371 ISO2/6HDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P20310
TIN designation P2031005
TICN designation P2031006
d1
Lcl3
l1
DN
l9
P M 2 0,4 45 6 9 2,8 2,1 5 3 -M2 -M2 -M2M 2,2 0,45 45 7 12 2,8 2,1 5 3 -M2.2 -M2.2M 2,5 0,45 50 8 12,5 2,8 2,1 5 3 -M2.5 -M2.5 -M2.5M 3 0,5 56 9 18 3,5 2,7 6 3 -M3 -M3 -M3M 3,5 0,6 56 11 20 4 3 6 3 -M3.5M 4 0,7 63 12 21 4,5 3,4 6 3 -M4 -M4 -M4M 5 0,8 70 13 25 6 4,9 8 3 -M5 -M5 -M5M 6 1 80 15 30 6 4,9 8 3 -M6 -M6 -M6M 7 1 80 15 30 7 5,5 8 3 -M7 -M7M 8 1,25 90 18 35 8 6,2 9 3 -M8 -M8 -M8M 10 1,5 100 20 39 10 8 11 3 -M10 -M10 -M10
DIN 376 ISO2/6HDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P20360
TIN designation P2036005
TICN designation P2036006
d1
Lcl1
DN
l9
P M 2 0,4 45 6 - 1,4 1,12 4 3 -M2M 2,5 0,45 50 8 - 1,8 1,4 4 3 -M2.5M 3 0,5 56 9 - 2,2 1,8 4 3 -M3M 4 0,7 63 12 - 2,8 2,1 5 3 -M4M 5 0,8 70 13 - 3,5 2,7 6 3 -M5M 6 1 80 15 - 4,5 3,4 6 3 -M6 -M6 -M6M 7 1 80 15 - 5,5 4,3 7 3 -M7M 8 1,25 90 18 - 6 4,9 8 3 -M8 -M8 -M8M 9 1,25 90 18 - 7 5,5 8 3 -M9M 10 1,5 100 20 - 7 5,5 8 3 -M10 -M10 -M10M 12 1,75 110 23 - 9 7 10 3 -M12 -M12 -M12M 14 2 110 25 - 11 9 12 3 -M14 -M14M 16 2 110 25 - 12 9 12 3 -M16 -M16 -M16M 18 2,5 125 30 - 14 11 14 4 -M18 -M18M 20 2,5 140 30 - 16 12 15 4 -M20 -M20 -M20M 22 2,5 140 30 - 18 14,5 17 4 -M22M 24 3 160 36 - 18 14,5 17 4 -M24 -M24 -M24M 27 3 160 36 - 20 16 19 4 -M27 -M27M 30 3,5 180 42 - 22 18 21 4 -M30 -M30 -M30M 33 3,5 180 42 - 25 20 23 4 -M33M 36 4 200 48 - 28 22 25 4 -M36 -M36M 39 4 200 48 - 32 24 27 4 -M39M 42 4,5 200 54 - 32 24 27 4 -M42M 45 4,5 220 54 - 36 29 32 4 -M45M 48 5 250 60 - 36 29 32 4 -M48M 52 5 250 60 - 40 32 35 4 -M52M 56 5,5 250 66 - 40 32 35 4 -M56
Prototex® X·pert P
Prototex® X·pert P
Prototex® X·pert P
M
M
M
DIN 371 ISO2/6HDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P20210
TIN designation P2021005
d1
Lcl3
l1
DN
l9
P M 1 0,25 40 5 - 2,5 2,1 5 2 -M11
M 1,2 0,25 40 5 - 2,5 2,1 5 2 -M1.21 -M1.21
M 1,4 0,3 40 6,5 - 2,5 2,1 5 2 -M1.41 -M1.41
M 1,6 0,35 40 7 - 2,5 2,1 5 2 -M1.61 -M1.61
M 1,8 0,35 40 7 - 2,5 2,1 5 2 -M1.81
M 2 0,4 45 6 9 2,8 2,1 5 2 -M2 -M2M 2,2 0,45 45 7 12 2,8 2,1 5 2 -M2.2M 2,3 0,4 45 7 12 2,8 2,1 5 2 -M2.3M 2,5 0,45 50 8 12,5 2,8 2,1 5 2 -M2.5 -M2.5M 2,6 0,45 50 8 12,5 2,8 2,1 5 2 -M2.6M 3 0,5 56 9 18 3,5 2,7 6 2 -M3 -M3M 3,5 0,6 56 11 20 4 3 6 2 -M3.5 -M3.5M 4 0,7 63 12 21 4,5 3,4 6 2 -M4 -M4M 4,5 0,75 70 13 25 6 4,9 8 2 -M4.5M 5 0,8 70 13 25 6 4,9 8 2 -M5 -M5M 6 1 80 15 30 6 4,9 8 2 -M6 -M6
≤M 1.4: 5H, ≥ M1.6: ISO 2/6H1 without reduced neck after the thread
NEW2012
NEW2012
NEW2012
ORDERING INFORMATION
132 Walter Prototyp – Threading
Prototex® X·pert P
Prototex® X·pert P
Prototex® X·pert P
M
M
M
DIN 371 ISO3/6GDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P20330
TIN designation P2033005
d1
Lcl3
l1
DN
l9
P M 2,5 0,45 50 8 12,5 2,8 2,1 5 3 -M2.5M 3 0,5 56 9 18 3,5 2,7 6 3 -M3M 3,5 0,6 56 11 20 4 3 6 3 -M3.5M 4 0,7 63 12 21 4,5 3,4 6 3 -M4M 5 0,8 70 13 25 6 4,9 8 3 -M5M 6 1 80 15 30 6 4,9 8 3 -M6 -M6M 7 1 80 15 30 7 5,5 8 3 -M7M 8 1,25 90 18 35 8 6,2 9 3 -M8 -M8M 10 1,5 100 20 39 10 8 11 3 -M10 -M10
DIN 376 ISO3/6GDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P20380
d1
Lcl1
DN
l9
P M 5 0,8 70 13 - 3,5 2,7 6 3 -M5M 6 1 80 15 - 4,5 3,4 6 3 -M6M 8 1,25 90 18 - 6 4,9 8 3 -M8M 10 1,5 100 20 - 7 5,5 8 3 -M10M 12 1,75 110 23 - 9 7 10 3 -M12M 14 2 110 25 - 11 9 12 3 -M14M 16 2 110 25 - 12 9 12 3 -M16M 18 2,5 125 30 - 14 11 14 4 -M18M 20 2,5 140 30 - 16 12 15 4 -M20M 24 3 160 36 - 18 14,5 17 4 -M24
DIN 371 ISO3/6GDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P20230
TIN designation P2023005
d1
Lcl3
l1
DN
l9
P M 2 0,4 45 6 9 2,8 2,1 5 2 -M2 -M2M 2,3 0,4 45 7 12 2,8 2,1 5 2 -M2.3M 2,5 0,45 50 8 12,5 2,8 2,1 5 2 -M2.5 -M2.5M 2,6 0,45 50 8 12,5 2,8 2,1 5 2 -M2.6M 3 0,5 56 9 18 3,5 2,7 6 2 -M3 -M3M 3,5 0,6 56 11 20 4 3 6 2 -M3.5 -M3.5M 4 0,7 63 12 21 4,5 3,4 6 2 -M4 -M4M 5 0,8 70 13 25 6 4,9 8 2 -M5 -M5
NEW2012
NEW2012
NEW2012
133Walter Prototyp – Threading
ORDERING INFORMATION
Prototex® X·pert P
Prototex® X·pert P/left-hand thread
Prototex® X·pert P
Prototex® X·pert P
Prototex® X·pert P/left-hand thread
M
M
M
M
M
DIN 371 7GDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P20340
TIN designation P2034005
d1
Lcl3
l1
DN
l9
P M 2 0,4 45 6 11 2,8 2,1 5 3 -M2 -M2M 2,5 0,45 50 8 12,5 2,8 2,1 5 3 -M2.5 -M2.5M 2,6 0,45 50 8 14 2,8 2,1 5 3 -M2.6M 3 0,5 56 9 18 3,5 2,7 6 3 -M3 -M3M 3,5 0,6 56 11 20 4 3 6 3 -M3.5 -M3.5M 4 0,7 63 12 21 4,5 3,4 6 3 -M4 -M4M 5 0,8 70 13 25 6 4,9 8 3 -M5 -M5M 6 1 80 15 30 6 4,9 8 3 -M6 -M6M 8 1,25 90 18 35 8 6,2 9 3 -M8 -M8M 10 1,5 100 20 39 10 8 11 3 -M10 -M10
DIN 376 7GDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P20390
TIN designation P2039005
d1
Lcl1
DN
l9
P M 12 1,75 110 23 - 9 7 10 3 -M12 -M12M 16 2 110 25 - 12 9 12 3 -M16 -M16M 20 2,5 140 30 - 16 12 15 4 -M20 -M20
NEW2012
NEW2012
DIN 371 ISO1/4HDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P20200
d1
Lcl3
l1
DN
l9
P M 3 0,5 56 9 18 3,5 2,7 6 2 -M3M 3,5 0,6 56 11 20 4 3 6 2 -M3.5M 4 0,7 63 12 21 4,5 3,4 6 2 -M4M 5 0,8 70 13 25 6 4,9 8 2 -M5M 6 1 80 15 30 6 4,9 8 2 -M6M 8 1,25 90 18 35 8 6,2 9 3 -M8M 10 1,5 100 20 39 10 8 11 3 -M10
DIN 371 ISO2/6HDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P202108
d1
Lcl3
l1
DN
l9
P M 2 LH 0,4 45 6 9 2,8 2,1 5 2 -M2M 3 LH 0,5 56 9 18 3,5 2,7 6 2 -M3M 4 LH 0,7 63 12 21 4,5 3,4 6 2 -M4M 5 LH 0,8 70 13 25 6 4,9 8 2 -M5M 6 LH 1 80 15 30 6 4,9 8 3 -M6M 8 LH 1,25 90 18 35 8 6,2 9 3 -M8M 10 LH 1,5 100 20 39 10 8 11 3 -M10
DIN 376 ISO2/6HDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P202608
d1
Lcl1
DN
l9
P M 12 LH 1,75 110 23 - 9 7 10 3 -M12M 16 LH 2 110 25 - 12 9 12 3 -M16M 20 LH 2,5 140 30 - 16 12 15 3 -M20
NEW2012
NEW2012
NEW2012
ORDERING INFORMATION
134 Walter Prototyp – Threading
Prototex® X·pert P AZ/interrupted teeth
Prototex® X·pert P AZ/interrupted teeth
M
M
DIN 371 ISO2/6HDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P40310
d1
Lcl3
l1
DN
l9
P M 3 0,5 56 9 18 3,5 2,7 6 3 -M3M 4 0,7 63 12 21 4,5 3,4 6 3 -M4M 5 0,8 70 13 25 6 4,9 8 3 -M5M 6 1 80 15 30 6 4,9 8 3 -M6M 8 1,25 90 18 35 8 6,2 9 3 -M8M 10 1,5 100 20 39 10 8 11 3 -M10
DIN 376 ISO2/6HDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P40360
d1
Lc
l1
DN
l9
P M 12 1,75 110 23 - 9 7 10 3 -M12M 14 2 110 25 - 11 9 12 3 -M14M 16 2 110 25 - 12 9 12 3 -M16M 20 2,5 140 30 - 16 12 15 4 -M20M 24 3 160 36 - 18 14,5 17 4 -M24
~DIN 371 ISO2/6HDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P203103
TIN designation P2031035
d1
Lcl3
l1
DN
l9
P M 3 0,5 112 9 18 3,5 2,7 6 3 -M3 -M3M 4 0,7 112 12 21 4,5 3,4 6 3 -M4 -M4M 5 0,8 125 13 25 6 4,9 8 3 -M5 -M5M 6 1 125 15 30 6 4,9 8 3 -M6 -M6M 8 1,25 140 18 40 8 6,2 9 3 -M8 -M8M 10 1,5 160 20 50 10 8 11 3 -M10 -M10
~DIN 376 ISO2/6HDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P203603
TIN designation P2036035
d1
Lcl1
DN
l9
P M 5 0,8 125 13 - 3,5 2,7 6 3 -M5 -M5M 6 1 125 15 - 4,5 3,4 6 3 -M6 -M6M 8 1,25 140 18 - 6 4,9 8 3 -M8 -M8M 10 1,5 160 20 - 7 5,5 8 3 -M10 -M10M 12 1,75 180 23 - 9 7 10 3 -M12 -M12M 14 2 180 25 - 11 9 12 3 -M14 -M14M 16 2 200 25 - 12 9 12 3 -M16 -M16M 20 2,5 224 30 - 16 12 15 4 -M20 -M20
Prototex® X·pert P/long series
Prototex® X·pert P/long series
M
M
NEW2012
NEW2012
NEW2012
NEW2012
~DIN 371 ISO2/6HDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P202103
d1
Lcl3
l1
DN
l9
P M 4 0,7 125 12 21 4,5 3,4 6 3 -M4M 5 0,8 140 13 25 6 4,9 8 3 -M5M 6 1 160 15 30 6 4,9 8 3 -M6
Prototex® X·pert P/extra long series MNEW2012
135Walter Prototyp – Threading
ORDERING INFORMATION
~DIN 376 ISO2/6HDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P202603
d1
Lcl1
DN
l9
P M 8 1,25 180 18 - 6 4,9 8 3 -M8M 10 1,5 200 20 - 7 5,5 8 3 -M10M 12 1,75 220 23 - 9 7 10 3 -M12M 14 2 220 25 - 11 9 12 3 -M14M 16 2 220 25 - 12 9 12 3 -M16M 20 2,5 280 30 - 16 12 15 4 -M20
Prototex® X·pert P/extra long series MNEW2012
Prototex® X·pert P MF
DIN 371 ISO2/6HDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P21210
d1
Lcl3
l1
DN
l9
P M 2 0,25 45 6 9 2,8 2,1 5 2 -M2X0.25M 2,2 0,25 45 7 12 2,8 2,1 5 2 -M2.2X0.25M 2,3 0,25 45 7 12 2,8 2,1 5 2 -M2.3X0.25M 2,5 0,35 50 8 12,5 2,8 2,1 5 2 -M2.5X0.35M 3 0,25 56 6 18 3,5 2,7 6 2 -M3X0.25M 3 0,35 56 9 18 3,5 2,7 6 2 -M3X0.35M 3,5 0,35 56 11 20 4 3 6 2 -M3.5X0.35M 4 0,35 63 12 21 4,5 3,4 6 2 -M4X0.35M 4 0,5 63 12 21 4,5 3,4 6 2 -M4X0.5M 4,5 0,5 70 13 25 6 4,9 8 2 -M4.5X0.5M 5 0,5 70 13 25 6 4,9 8 3 -M5X0.5M 5 0,75 70 13 25 6 4,9 8 3 -M5X0.75M 6 0,5 80 15 30 6 4,9 8 3 -M6X0.5M 6 0,75 80 15 30 6 4,9 8 3 -M6X0.75M 7 0,75 80 15 30 7 5,5 8 3 -M7X0.75M 8 1 90 18 35 8 6,2 9 3 -M8X1M 10 1 90 20 39 10 8 11 3 -M10X1
ORDERING INFORMATION
136 Walter Prototyp – Threading
Prototex® X·pert P MF
DIN 374 ISO2/6HDN
P mm
l1js16 mm
Lcmm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P21360
TIN designation P2136005
d1
Lcl1
DN
l9
P M 4 0,5 63 12 2,8 2,1 5 3 -M4X0.5M 5 0,5 70 13 3,5 2,7 6 3 -M5X0.5 -M5X0.5M 6 0,5 80 15 4,5 3,4 6 3 -M6X0.5 -M6X0.5M 6 0,75 80 15 4,5 3,4 6 3 -M6X0.75 -M6X0.75M 8 0,5 80 15 6 4,9 8 3 -M8X0.5 -M8X0.5M 8 0,75 80 15 6 4,9 8 3 -M8X0.75 -M8X0.75M 8 1 90 18 6 4,9 8 3 -M8X1 -M8X1M 9 1 90 18 7 5,5 8 3 -M9X1M 10 0,5 90 20 7 5,5 8 3 -M10X0.5M 10 0,75 90 20 7 5,5 8 3 -M10X0.75M 10 1 90 20 7 5,5 8 3 -M10X1 -M10X1M 10 1,25 100 20 7 5,5 8 3 -M10X1.25 -M10X1.25M 12 0,5 100 21 9 7 10 4 -M12X0.5M 12 1 100 21 9 7 10 4 -M12X1 -M12X1M 12 1,25 100 21 9 7 10 4 -M12X1.25M 12 1,5 100 21 9 7 10 4 -M12X1.5 -M12X1.5M 14 1 100 21 11 9 12 4 -M14X1M 14 1,25 100 21 11 9 12 4 -M14X1.25M 14 1,5 100 21 11 9 12 4 -M14X1.5 -M14X1.5M 16 1 100 21 12 9 12 4 -M16X1M 16 1,5 100 21 12 9 12 4 -M16X1.5 -M16X1.5M 18 1 110 24 14 11 14 4 -M18X1M 18 1,5 110 24 14 11 14 4 -M18X1.5 -M18X1.5M 18 2 125 30 14 11 14 4 -M18X2M 20 1 125 24 16 12 15 4 -M20X1M 20 1,5 125 24 16 12 15 4 -M20X1.5 -M20X1.5M 20 2 140 30 16 12 15 4 -M20X2M 22 1 125 24 18 14,5 17 4 -M22X1M 22 1,5 125 24 18 14,5 17 4 -M22X1.5 -M22X1.5M 22 2 140 26 18 14,5 17 4 -M22X2M 24 1 140 26 18 14,5 17 4 -M24X1M 24 1,5 140 26 18 14,5 17 4 -M24X1.5 -M24X1.5M 24 2 140 26 18 14,5 17 4 -M24X2 -M24X2M 25 1,5 140 26 18 14,5 17 4 -M25X1.5M 26 1,5 140 26 18 14,5 17 4 -M26X1.5M 27 1 140 26 20 16 19 4 -M27X1M 27 1,5 140 26 20 16 19 4 -M27X1.5M 27 2 140 26 20 16 19 4 -M27X2 -M27X2M 28 1,5 140 26 20 16 19 4 -M28X1.5M 30 1 150 26 22 18 21 4 -M30X1M 30 1,5 150 26 22 18 21 4 -M30X1.5 -M30X1.5M 30 2 150 26 22 18 21 4 -M30X2 -M30X2M 32 1,5 150 26 22 18 21 4 -M32X1.5M 32 2 150 26 22 18 21 4 -M32X2M 33 1,5 160 28 25 20 23 4 -M33X1.5M 34 1,5 170 28 28 22 25 4 -M34X1.5M 35 1,5 170 28 28 22 25 4 -M35X1.5M 36 1,5 170 28 28 22 25 4 -M36X1.5M 36 2 170 28 28 22 25 4 -M36X2M 36 3 200 39 28 22 25 4 -M36X3M 38 1,5 170 28 28 22 25 5 -M38X1.5M 39 2 170 28 32 24 27 4 -M39X2M 40 1,5 170 28 32 24 27 5 -M40X1.5M 40 2 170 28 32 24 27 4 -M40X2M 42 1,5 170 28 32 24 27 5 -M42X1.5M 42 2 170 28 32 24 27 4 -M42X2M 42 3 200 42 32 24 27 4 -M42X3M 45 1,5 180 28 36 29 32 5 -M45X1.5M 48 1,5 190 28 36 29 32 5 -M48X1.5M 48 3 225 45 36 29 32 4 -M48X3M 50 1,5 190 28 36 29 32 5 -M50X1.5
NEW2012
137Walter Prototyp – Threading
ORDERING INFORMATION
Prototex® X·pert P MF
DIN 374 ISO3/6GDN
P mm
l1js16 mm
Lcmm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P21380
TIN designation P2138005
d1
Lcl1
DN
l9
P M 4 0,5 63 12 2,8 2,1 5 3 -M4X0.5M 5 0,5 70 13 3,5 2,7 6 3 -M5X0.5M 6 0,5 80 15 4,5 3,4 6 3 -M6X0.5M 6 0,75 80 15 4,5 3,4 6 3 -M6X0.75M 8 0,75 80 15 6 4,9 8 3 -M8X0.75M 8 1 90 18 6 4,9 8 3 -M8X1 -M8X1M 10 1 90 20 7 5,5 8 3 -M10X1 -M10X1M 10 1,25 100 20 7 5,5 8 3 -M10X1.25M 12 1 100 21 9 7 10 4 -M12X1 -M12X1M 12 1,25 100 21 9 7 10 4 -M12X1.25M 12 1,5 100 21 9 7 10 4 -M12X1.5 -M12X1.5M 14 1,5 100 21 11 9 12 4 -M14X1.5 -M14X1.5M 16 1,5 100 21 12 9 12 4 -M16X1.5 -M16X1.5M 18 1,5 110 24 14 11 14 4 -M18X1.5M 20 1,5 125 24 16 12 15 4 -M20X1.5M 22 1,5 125 24 18 14,5 17 4 -M22X1.5M 24 1,5 140 26 18 14,5 17 4 -M24X1.5
NEW2012
Prototex® X·pert P/left-hand thread MF
DIN 374 ISO2/6HDN
P mm
l1js16 mm
Lcmm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P212608
d1
Lcl1
DN
l9
P M 8 LH 1 90 18 6 4,9 8 3 -M8X1M 10 LH 1 90 20 7 5,5 8 3 -M10X1M 12 LH 1 100 21 9 7 10 4 -M12X1M 12 LH 1,5 100 21 9 7 10 4 -M12X1.5M 14 LH 1,5 100 21 11 9 12 4 -M14X1.5M 16 LH 1 100 21 12 9 12 4 -M16X1M 16 LH 1,5 100 21 12 9 12 4 -M16X1.5M 18 LH 1,5 110 24 14 11 14 4 -M18X1.5M 20 LH 1,5 125 24 16 12 15 4 -M20X1.5
NEW2012
ORDERING INFORMATION
138 Walter Prototyp – Threading
Prototex® X·pert P
Prototex® X·pert P
Prototex® X·pert P
UNC
UNC
UNC
DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P22210
d1
Lcl3
l1
DN
l9
P No. 2-56 2,184 45 7 12 2,8 2,1 5 2 -UNC2No. 4-40 2,845 56 9 18 3,5 2,7 6 2 -UNC4No. 6-32 3,505 56 11 20 4 3 6 2 -UNC6No. 8-32 4,166 63 12 21 4,5 3,4 6 2 -UNC8
DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P22310
TIN designation P2231005
d1
Lcl3
l1
DN
l9
P No. 2-56 2,184 45 7 12 2,8 2,1 5 3 -UNC2No. 4-40 2,845 56 9 18 3,5 2,7 6 3 -UNC4No. 5-40 3,175 56 10 18 3,5 2,7 6 3 -UNC5No. 6-32 3,505 56 11 20 4 3 6 3 -UNC6 -UNC6No. 8-32 4,166 63 12 21 4,5 3,4 6 3 -UNC8No. 10-24 4,826 70 13 25 6 4,9 8 3 -UNC10No. 12-24 5,486 80 15 30 6 4,9 8 3 -UNC121/4-20 6,35 80 15 30 7 5,5 8 3 -UNC1/45/16-18 7,938 90 18 35 8 6,2 9 3 -UNC5/163/8-16 9,525 100 20 39 10 8 11 3 -UNC3/8
DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P22360
TIN designation P2236005
d1
Lcl1
DN
l9
P 7/16-14 11,113 100 20 - 8 6,2 9 3 -UNC7/161/2-13 12,7 110 23 - 9 7 10 3 -UNC1/2 -UNC1/29/16-12 14,288 110 25 - 11 9 12 3 -UNC9/165/8-11 15,875 110 25 - 12 9 12 3 -UNC5/8 -UNC5/83/4-10 19,05 125 30 - 14 11 14 3 -UNC3/4 -UNC3/47/8-9 22,225 140 30 - 18 14,5 17 3 -UNC7/81-8 25,4 160 36 - 18 14,5 17 3 -UNC11 1/8-7 28,575 180 42 - 22 18 21 4 -UNC1.1/81 1/4-7 31,75 180 42 - 22 18 21 4 -UNC1.1/41 1/2-6 38,1 200 48 - 28 22 25 4 -UNC1.1/2
NEW2012
NEW2012
NEW2012
139Walter Prototyp – Threading
ORDERING INFORMATION
Prototex® X·pert P
Prototex® X·pert P
Prototex® X·pert P
UNF
UNF
UNEF
DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P23210
TIN designation P2321005
d1
Lcl3
l1
DN
l9
P No. 0-80 1,524 40 8 - 2,5 2,1 5 2 -UNF01
No. 1-72 1,854 45 6 9 2,8 2,1 5 2 -UNF1No. 2-64 2,184 45 7 12 2,8 2,1 5 2 -UNF2No. 3-56 2,515 50 8 12,5 2,8 2,1 5 2 -UNF3No. 4-48 2,845 56 9 18 3,5 2,7 6 2 -UNF4No. 6-40 3,505 56 11 20 4 3 6 2 -UNF6No. 8-36 4,166 63 12 21 4,5 3,4 6 2 -UNF8No. 10-32 4,826 70 13 25 6 4,9 8 2 -UNF10No. 12-28 5,486 80 15 30 6 4,9 8 3 -UNF12 -UNF121/4-28 6,35 80 15 30 7 5,5 8 3 -UNF1/4 -UNF1/4
1 without reduced neck after the thread
DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P23360
TIN designation P2336005
d1
Lcl1
DN
l9
P 5/16-24 7,938 90 18 6 4,9 8 3 -UNF5/16 -UNF5/163/8-24 9,525 100 20 7 5,5 8 3 -UNF3/8 -UNF3/87/16-20 11,113 100 20 8 6,2 9 3 -UNF7/16 -UNF7/161/2-20 12,7 100 21 9 7 10 4 -UNF1/2 -UNF1/29/16-18 14,288 100 21 11 9 12 4 -UNF9/165/8-18 15,875 100 21 12 9 12 4 -UNF5/8 -UNF5/83/4-16 19,05 110 24 14 11 14 4 -UNF3/4 -UNF3/47/8-14 22,225 125 24 18 14,5 17 4 -UNF7/81-12 25,4 140 26 18 14,5 17 4 -UNF11 1/8-12 28,575 150 26 22 18 21 4 -UNF1.1/81 1/4-12 31,75 150 26 22 18 21 4 -UNF1.1/41 3/8-12 34,925 170 28 28 22 25 4 -UNF1.3/81 1/2-12 38,1 170 28 28 22 25 4 -UNF1.1/2
DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P233602
d1
Lcl1
DN
l9
P 1/4-32 6,35 80 15 4,5 3,4 6 3 -UNEF1/45/16-32 7,938 90 18 6 4,9 8 3 -UNEF5/163/8-32 9,525 90 20 7 5,5 8 3 -UNEF3/87/16-28 11,113 90 20 8 6,2 9 3 -UNEF7/161/2-28 12,7 100 21 9 7 10 4 -UNEF1/29/16-24 14,288 100 21 11 9 12 4 -UNEF9/165/8-24 15,875 100 21 12 9 12 4 -UNEF5/811/16-24 17,462 110 24 14 11 14 4 -UNEF11/163/4-20 19,05 110 24 14 11 14 4 -UNEF3/47/8-20 22,225 125 24 18 14,5 17 4 -UNEF7/8
NEW2012
NEW2012
NEW2012
ORDERING INFORMATION
140 Walter Prototyp – Threading
Prototex® X·pert P
Prototex® X·pert P
Prototex® X·pert P
Prototex® X·pert P
G
BSW
BSW
EgM
DIN 5156 DNNom
DNmm
Threads per inch
l1js16 mm
Lcmm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P24360
TIN designation P2436005
d1
Lcl1
DN
l9
P G 1/8 9,728 28 90 20 7 5,5 8 3 -G1/8 -G1/8G 1/4 13,157 19 100 21 11 9 12 3 -G1/4 -G1/4G 3/8 16,662 19 100 21 12 9 12 4 -G3/8 -G3/8G 1/2 20,955 14 125 24 16 12 15 4 -G1/2 -G1/2G 5/8 22,911 14 125 24 18 14,5 17 4 -G5/8G 3/4 26,441 14 140 26 20 16 19 4 -G3/4 -G3/4G 7/8 30,201 14 150 26 22 18 21 4 -G7/8G 1 33,249 11 160 28 25 20 23 4 -G1 -G1G 1 1/4 41,91 11 170 28 32 24 27 4 -G1.1/4G 1 1/2 47,803 11 190 30 36 29 32 5 -G1.1/2G 1 3/4 53,746 11 190 32 40 32 35 5 -G1.3/4G 2 59,614 11 220 34 45 35 38 5 -G2
DIN 2184-1 mc DNNom
DNmm
Threads per inch
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P28210
d1
Lcl3
l1
DN
l9
P 1/8-40 3,175 40 56 10 18 3,5 2,7 6 2 -BSW1/83/16-24 4,763 24 70 13 25 6 4,9 8 2 -BSW3/161/4-20 6,35 20 80 15 30 7 5,5 8 3 -BSW1/45/16-18 7,938 18 90 18 35 8 6,2 9 3 -BSW5/163/8-16 9,525 16 100 20 39 10 8 11 3 -BSW3/8
DIN 2184-1 mc DNNom
DNmm
Threads per inch
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P28360
d1
Lcl1
DN
l9
P 7/16-14 11,113 14 100 20 - 8 6,2 9 3 -BSW7/161/2-12 12,7 12 110 23 - 9 7 10 3 -BSW1/25/8-11 15,875 11 110 25 - 12 9 12 3 -BSW5/83/4-10 19,05 10 125 30 - 14 11 14 4 -BSW3/47/8-9 22,225 9 140 30 - 18 14,5 17 4 -BSW7/81-8 25,4 8 160 36 - 18 14,5 17 4 -BSW1
DIN 40 435 6H mod DNNom
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P203009
d1
Lcl3
l1
DN
l9
P EG M 2,5 0,45 56 9 18 3,5 2,7 6 3 -EGM2.5EG M 3 0,5 63 12 21 4,5 3,4 6 3 -EGM3EG M 4 0,7 70 13 25 6 4,9 8 3 -EGM4EG M 5 0,8 80 15 30 6 4,9 8 3 -EGM5EG M 6 1 90 18 35 8 6,2 9 3 -EGM6EG M 8 1,25 100 20 39 10 8 11 3 -EGM8
NEW2012
NEW2012
NEW2012
NEW2012
141Walter Prototyp – Threading
ORDERING INFORMATION
Prototex® X·pert P
Prototex® X·pert P
Prototex® X·pert P
Prototex® X·pert P
EgM
EgUNC
EgUNF
EgUNF
DIN 40 435 6H mod DNNom
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P203509
d1
Lcl1
DN
l9
P EG M 10 1,5 100 21 - 9 7 10 3 -EGM10EG M 12 1,75 110 25 - 11 9 12 3 -EGM12EG M 16 2 125 30 - 14 11 14 4 -EGM16
DIN 2184-1 3B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P223009
d1
Lcl3
l1
DN
l9
P EG no. 6-32 4,536 70 13 25 6 4,9 8 3 -EGUNC6EG no. 8-32 5,197 80 15 30 6 4,9 8 3 -EGUNC8EG no. 10-24 6,201 80 15 30 7 5,5 8 3 -EGUNC10EG 1/4-20 8 90 18 35 8 6,2 9 3 -EGUNC1/4
DIN 2184-1 3B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P233009
d1
Lcl3
l1
DN
l9
P EG no. 6-40 4,33 70 13 25 6 4,9 8 3 -EGUNF6EG no. 8-36 5,083 80 15 30 6 4,9 8 3 -EGUNF8EG no. 10-32 5,857 80 15 30 6 4,9 8 3 -EGUNF10EG 1/4-28 7,528 90 18 35 8 6,2 9 3 -EGUNF1/4
DIN 2184-1 3B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
uncoated designation
P233509
d1
Lcl1
DN
l9
P EG 5/16-24 9,313 90 20 - 7 5,5 8 3 -EGUNF5/16EG 3/8-24 10,9 90 20 - 8 6,2 9 3 -EGUNF3/8EG 7/16-20 12,763 100 21 - 9 7 10 4 -EGUNF7/16EG 1/2-20 14,35 100 21 - 11 9 12 4 -EGUNF1/2
NEW2012
NEW2012
NEW2012
NEW2012
ORDERING INFORMATION
142 Walter Prototyp – Threading
Prototex® X·pert M
Prototex® X·pert M
Prototex® X·pert M
M
M
M
DIN 371 6HXDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
VAP designation
M20213
TIN designation M2021305
TICN designation M2021306
d1
Lcl3
l1
DN
l9
P M 1,6 0,35 40 7 - 2,5 2,1 5 2 -M1.61
M 1,7 0,35 40 7 - 2,5 2,1 5 2 -M1.71
M 1,8 0,35 40 7 - 2,5 2,1 5 2 -M1.81
M 2 0,4 45 6 9 2,8 2,1 5 2 -M2 -M2 -M2M 2,2 0,45 45 7 12 2,8 2,1 5 2 -M2.2M 2,3 0,4 45 7 12 2,8 2,1 5 2 -M2.3M 2,5 0,45 50 8 12,5 2,8 2,1 5 2 -M2.5 -M2.5 -M2.5M 2,6 0,45 50 8 12,5 2,8 2,1 5 2 -M2.6M 3 0,5 56 9 18 3,5 2,7 6 2 -M3 -M3 -M3M 3,5 0,6 56 11 20 4 3 6 2 -M3.5 -M3.5 -M3.5M 4 0,7 63 12 21 4,5 3,4 6 3 -M4 -M4 -M4M 4,5 0,75 70 13 25 6 4,9 8 3 -M4.5M 5 0,8 70 13 25 6 4,9 8 3 -M5 -M5 -M5M 6 1 80 15 30 6 4,9 8 3 -M6 -M6 -M6M 7 1 80 15 30 7 5,5 8 3 -M7M 8 1,25 90 18 35 8 6,2 9 3 -M8 -M8 -M8M 9 1,25 90 18 35 9 7 10 3 -M9M 10 1,5 100 20 39 10 8 11 3 -M10 -M10 -M10
1 without reduced neck after the thread
DIN 376 6HXDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
VAP designation
M20263
TIN designation M2026305
TICN designation M2026306
d1
Lcl1
DN
l9
P M 5 0,8 70 13 - 3,5 2,7 6 3 -M5 -M5M 6 1 80 15 - 4,5 3,4 6 3 -M6 -M6M 8 1,25 90 18 - 6 4,9 8 3 -M8 -M8M 10 1,5 100 20 - 7 5,5 8 3 -M10 -M10M 12 1,75 110 23 - 9 7 10 4 -M12 -M12 -M12M 14 2 110 25 - 11 9 12 4 -M14 -M14 -M14M 16 2 110 25 - 12 9 12 4 -M16 -M16 -M16M 18 2,5 125 30 - 14 11 14 4 -M18M 20 2,5 140 30 - 16 12 15 4 -M20 -M20 -M20M 22 2,5 140 30 - 18 14,5 17 4 -M22M 24 3 160 36 - 18 14,5 17 4 -M24 -M24M 27 3 160 36 - 20 16 19 4 -M27M 30 3,5 180 42 - 22 18 21 4 -M30M 33 3,5 180 42 - 25 20 23 5 -M33M 36 4 200 48 - 28 22 25 5 -M36
DIN 371 6GXDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
VAP designation
M20233
TICN designation M2023306
d1
Lcl3
l1
DN
l9
P M 3 0,5 56 9 18 3,5 2,7 6 2 -M3 -M3M 4 0,7 63 12 21 4,5 3,4 6 3 -M4 -M4M 5 0,8 70 13 25 6 4,9 8 3 -M5 -M5M 6 1 80 15 30 6 4,9 8 3 -M6 -M6M 7 1 80 15 30 7 5,5 8 3 -M7 -M7M 8 1,25 90 18 35 8 6,2 9 3 -M8 -M8M 10 1,5 100 20 39 10 8 11 3 -M10 -M10
NEW2012
NEW2012
NEW2012
143Walter Prototyp – Threading
ORDERING INFORMATION
Prototex® X·pert M
Prototex® X·pert M
Prototex® X·pert M
Prototex® X·pert M
MF
MF
MF
UNC
DIN 371 6HXDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
TIN
designation M2121305
d1
Lcl3
l1
DN
l9
P M 5 0,5 70 13 25 6 4,9 8 3 -M5X0.5M 6 0,5 80 15 30 6 4,9 8 3 -M6X0.5M 6 0,75 80 15 30 6 4,9 8 3 -M6X0.75
DIN 374 6HXDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
VAP designation
M21263
TIN designation M2126305
d1
Lcl1
DN
l9
P M 8 0,5 80 15 - 6 4,9 8 3 -M8X0.5 -M8X0.5M 8 0,75 80 15 - 6 4,9 8 3 -M8X0.75 -M8X0.75M 8 1 90 18 - 6 4,9 8 3 -M8X1 -M8X1M 10 0,75 90 20 - 7 5,5 8 3 -M10X0.75M 10 1 90 20 - 7 5,5 8 3 -M10X1 -M10X1M 10 1,25 100 20 - 7 5,5 8 3 -M10X1.25 -M10X1.25M 12 1 100 21 - 9 7 10 4 -M12X1M 12 1,25 100 21 - 9 7 10 4 -M12X1.25M 12 1,5 100 21 - 9 7 10 4 -M12X1.5 -M12X1.5M 14 1 100 21 - 11 9 12 4 -M14X1M 14 1,5 100 21 - 11 9 12 4 -M14X1.5 -M14X1.5M 16 1,5 100 21 - 12 9 12 4 -M16X1.5 -M16X1.5M 18 1,5 110 24 - 14 11 14 4 -M18X1.5 -M18X1.5M 20 1,5 125 24 - 16 12 15 4 -M20X1.5 -M20X1.5M 22 1,5 125 24 - 18 14,5 17 4 -M22X1.5M 24 1,5 140 26 - 18 14,5 17 4 -M24X1.5
DIN 374 6GXDN
P mm
l1js16 mm
Lcmm
d1h9
mm
B
h12 mm
l9mm N
TIN designation M2128305
d1
Lcl1
DN
l9
P M 12 1,5 100 21 9 7 10 4 -M12X1.5M 14 1,5 100 21 11 9 12 4 -M14X1.5M 16 1,5 100 21 12 9 12 4 -M16X1.5M 20 1,5 125 24 16 12 15 4 -M20X1.5M 24 1,5 140 26 18 14,5 17 4 -M24X1.5
DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
VAP designation
M22213
TIN designation M2221305
d1
Lcl3
l1
DN
l9
P No. 2-56 2,184 45 7 12 2,8 2,1 5 2 -UNC2 -UNC2No. 3-48 2,515 50 8 12,5 2,8 2,1 5 2 -UNC3 -UNC3No. 4-40 2,845 56 9 18 3,5 2,7 6 2 -UNC4 -UNC4No. 5-40 3,175 56 10 18 3,5 2,7 6 2 -UNC5 -UNC5No. 6-32 3,505 56 11 20 4 3 6 2 -UNC6 -UNC6No. 8-32 4,166 63 12 21 4,5 3,4 6 3 -UNC8 -UNC8No. 10-24 4,826 70 13 25 6 4,9 8 3 -UNC10 -UNC10No. 12-24 5,486 80 15 30 6 4,9 8 3 -UNC12 -UNC121/4-20 6,35 80 15 30 7 5,5 8 3 -UNC1/4 -UNC1/4
NEW2012
NEW2012
NEW2012
NEW2012
ORDERING INFORMATION
144 Walter Prototyp – Threading
DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
VAP designation
M22263
TIN designation M2226305
d1
Lcl1
DN
l9
P 5/16-18 7,938 90 18 - 6 4,9 8 3 -UNC5/163/8-16 9,525 100 20 - 7 5,5 8 3 -UNC3/8 -UNC3/87/16-14 11,113 100 20 - 8 6,2 9 3 -UNC7/161/2-13 12,7 110 23 - 9 7 10 4 -UNC1/2 -UNC1/29/16-12 14,288 110 25 - 11 9 12 4 -UNC9/165/8-11 15,875 110 25 - 12 9 12 4 -UNC5/83/4-10 19,05 125 30 - 14 11 14 4 -UNC3/47/8-9 22,225 140 30 - 18 14,5 17 4 -UNC7/81-8 25,4 160 36 - 18 14,5 17 4 -UNC1
Prototex® X·pert M
Prototex® X·pert M
Prototex® X·pert M
Prototex® X·pert M
UNC
UNF
UNF
G
DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
VAP designation
M23213
TIN designation M2321305
d1
Lcl3
l1
DN
l9
P No. 5-44 3,175 56 10 18 3,5 2,7 6 2 -UNF5No. 6-40 3,505 56 11 20 4 3 6 2 -UNF6No. 8-36 4,166 63 12 21 4,5 3,4 6 2 -UNF8No. 10-32 4,826 70 13 25 6 4,9 8 3 -UNF10 -UNF10No. 12-28 5,486 80 15 30 6 4,9 8 3 -UNF121/4-28 6,35 80 15 30 7 5,5 8 3 -UNF1/4 -UNF1/4
DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
d1h9
mm
B
h12 mm
l9mm N
VAP designation
M23263
TIN designation M2326305
d1
Lcl1
DN
l9
P 5/16-24 7,938 90 18 6 4,9 8 3 -UNF5/16 -UNF5/163/8-24 9,525 100 20 7 5,5 8 3 -UNF3/8 -UNF3/87/16-20 11,113 100 20 8 6,2 9 3 -UNF7/16 -UNF7/161/2-20 12,7 100 21 9 7 10 4 -UNF1/2 -UNF1/29/16-18 14,288 100 21 11 9 12 4 -UNF9/165/8-18 15,875 100 21 12 9 12 4 -UNF5/83/4-16 19,05 110 24 14 11 14 4 -UNF3/47/8-14 22,225 125 24 18 14,5 17 4 -UNF7/81-12 25,4 140 26 18 14,5 17 4 -UNF1
DIN 5156 DNNom
DNmm
Threads per inch
l1js16 mm
Lcmm
d1h9
mm
B
h12 mm
l9mm N
VAP designation
M24263
TIN designation M2426305
d1
Lcl1
DN
l9
P G 1/8 9,728 28 90 20 7 5,5 8 3 -G1/8 -G1/8G 1/4 13,157 19 100 21 11 9 12 4 -G1/4 -G1/4G 3/8 16,662 19 100 21 12 9 12 4 -G3/8 -G3/8G 1/2 20,955 14 125 24 16 12 15 4 -G1/2 -G1/2G 5/8 22,911 14 125 24 18 14,5 17 4 -G5/8G 3/4 26,441 14 140 26 20 16 19 4 -G3/4 -G3/4G 1 33,249 11 160 28 25 20 23 5 -G1 -G1
NEW2012
NEW2012
NEW2012
NEW2012
145Walter Prototyp – Threading
ORDERING INFORMATION
Prototex® X·pert M
Prototex® X·pert M
EgM
EgUNF
DIN 40 435 6H mod DNNom
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
VAP designation
M203009
d1
Lcl3
l1
DN
l9
P EG M 2,5 0,45 56 9 18 3,5 2,7 6 2 -EGM2.5EG M 3 0,5 63 12 21 4,5 3,4 6 2 -EGM3EG M 4 0,7 70 13 25 6 4,9 8 3 -EGM4EG M 5 0,8 80 15 30 6 4,9 8 3 -EGM5EG M 6 1 90 18 35 8 6,2 9 3 -EGM6EG M 8 1,25 100 20 39 10 8 11 3 -EGM8
DIN 2184-1 3B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
VAP designation
M233009
d1
Lcl3
l1
DN
l9
P EG no. 8-36 5,083 80 15 30 6 4,9 8 3 -EGUNF8EG no. 10-32 5,857 80 15 30 6 4,9 8 3 -EGUNF10EG 1/4-28 7,528 90 18 35 8 6,2 9 3 -EGUNF1/4
NEW2012
NEW2012
ORDERING INFORMATION
146 Walter Prototyp – Threading
Paradur® X·pert M
Paradur® X·pert M
Paradur® X·pert M
M
M
M
DIN 371 6HXDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
VAP designation
M20513
TIN designation M2051305
TICN designation M2051306
d1
Lcl3
l1
DN
l9
P M 1,6 0,35 40 6 - 2,5 2,1 5 3 -M1.614
M 1,7 0,35 40 6 - 2,5 2,1 5 3 -M1.714
M 1,8 0,35 40 6 - 2,5 2,1 5 3 -M1.814
M 2 0,4 45 4 9 2,8 2,1 5 3 -M24 -M24 -M24
M 2,5 0,45 50 4 12,5 2,8 2,1 5 3 -M2.54 -M2.54 -M2.54
M 3 0,5 56 6 18 3,5 2,7 6 3 -M3 -M3 -M3M 3,5 0,6 56 6,5 20 4 3 6 3 -M3.5M 4 0,7 63 7 21 4,5 3,4 6 3 -M4 -M4 -M4M 4,5 0,75 70 8 25 6 4,9 8 3 -M4.5M 5 0,8 70 8 25 6 4,9 8 3 -M5 -M5 -M5M 6 1 80 10 30 6 4,9 8 3 -M6 -M6 -M6M 7 1 80 10 30 7 5,5 8 3 -M7M 8 1,25 90 12 35 8 6,2 9 3 -M8 -M8 -M8M 10 1,5 100 15 39 10 8 11 3 -M10 -M10 -M10
1 without reduced neck after the thread4 without thread taper
DIN 376 6HXDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
VAP designation
M20563
TIN designation M2056305
TICN designation M2056306
d1
Lcl1
DN
l9
P M 6 1 80 10 - 4,5 3,4 6 3 -M6 -M6M 8 1,25 90 12 - 6 4,9 8 3 -M8 -M8M 10 1,5 100 15 - 7 5,5 8 3 -M10 -M10M 12 1,75 110 16 - 9 7 10 4 -M12 -M12 -M12M 14 2 110 20 - 11 9 12 4 -M14M 16 2 110 20 - 12 9 12 4 -M16 -M16 -M16M 18 2,5 125 25 - 14 11 14 4 -M18M 20 2,5 140 25 - 16 12 15 4 -M20 -M20 -M20M 22 2,5 140 25 - 18 14,5 17 4 -M22M 24 3 160 30 - 18 14,5 17 4 -M24 -M24M 27 3 160 30 - 20 16 19 5 -M27M 30 3,5 180 35 - 22 18 21 5 -M30 -M30M 33 3,5 180 35 - 25 20 23 5 -M33M 36 4 200 40 - 28 22 25 5 -M36M 42 4,5 200 45 - 32 24 27 5 -M42
DIN 371 6GXDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
VAP designation
M20533
TICN designation M2053306
d1
Lcl3
l1
DN
l9
P M 3 0,5 56 6 18 3,5 2,7 6 3 -M3 -M3M 4 0,7 63 7 21 4,5 3,4 6 3 -M4 -M4M 5 0,8 70 8 25 6 4,9 8 3 -M5 -M5M 6 1 80 10 30 6 4,9 8 3 -M6 -M6M 8 1,25 90 12 35 8 6,2 9 3 -M8 -M8M 10 1,5 100 15 39 10 8 11 3 -M10 -M10
NEW2012
NEW2012
NEW2012
147Walter Prototyp – Threading
ORDERING INFORMATION
Paradur® X·pert M/extra long series
Paradur® X·pert M/extra long series
Paradur® X·pert M
Paradur® X·pert M
M
M
MF
MF
~DIN 371 6HXDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
THL designation M2051332
d1
Lcl3
l1
DN
l9
P M 4 0,7 125 7 21 4,5 3,4 6 3 -M4M 5 0,8 140 8 25 6 4,9 8 3 -M5M 6 1 160 10 30 6 4,9 8 3 -M6
~DIN 376 6HXDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
THL designation M2056332
Lcl1
DN
l9
P
d1
M 8 1,25 180 12 - 6 4,9 8 3 -M8M 10 1,5 200 15 - 7 5,5 8 3 -M10M 12 1,75 220 16 - 9 7 10 4 -M12M 16 2 220 20 - 12 9 12 4 -M16M 20 2,5 280 25 - 16 12 15 4 -M20
DIN 371 6HXDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
VAP designation
M21513
TIN designation M2151305
d1
Lcl3
l1
DN
l9
P M 4 0,5 63 7 21 4,5 3,4 6 3 -M4X0.5 -M4X0.5M 5 0,5 70 8 25 6 4,9 8 3 -M5X0.5 -M5X0.5M 6 0,5 80 10 30 6 4,9 8 3 -M6X0.5 -M6X0.5M 6 0,75 80 10 30 6 4,9 8 3 -M6X0.75
DIN 374 6HXDN
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
VAP designation
M21563
TIN designation M2156305
d1
Lcl1
DN
l9
P M 8 0,5 80 10 - 6 4,9 8 3 -M8X0.5 -M8X0.5M 8 0,75 80 10 - 6 4,9 8 3 -M8X0.75 -M8X0.75M 8 1 90 13 - 6 4,9 8 3 -M8X1 -M8X1M 10 0,75 90 12 - 7 5,5 8 3 -M10X0.75 -M10X0.75M 10 1 90 12 - 7 5,5 8 3 -M10X1 -M10X1M 10 1,25 100 15 - 7 5,5 8 3 -M10X1.25 -M10X1.25M 12 1 100 13 - 9 7 10 4 -M12X1 -M12X1M 12 1,25 100 13 - 9 7 10 4 -M12X1.25 -M12X1.25M 12 1,5 100 13 - 9 7 10 4 -M12X1.5 -M12X1.5M 14 1 100 15 - 11 9 12 4 -M14X1M 14 1,5 100 15 - 11 9 12 4 -M14X1.5 -M14X1.5M 16 1,5 100 15 - 12 9 12 4 -M16X1.5 -M16X1.5M 18 1,5 110 17 - 14 11 14 4 -M18X1.5 -M18X1.5M 20 1,5 125 17 - 16 12 15 4 -M20X1.5 -M20X1.5M 20 2 140 25 - 16 12 15 4 -M20X2M 22 1,5 125 18 - 18 14,5 17 5 -M22X1.5M 24 1,5 140 20 - 18 14,5 17 5 -M24X1.5M 24 2 140 20 - 18 14,5 17 5 -M24X2M 27 2 140 20 - 20 16 19 5 -M27X2
NEW2012
NEW2012
NEW2012
NEW2012
ORDERING INFORMATION
148 Walter Prototyp – Threading
Paradur® X·pert M
Paradur® X·pert M
Paradur® X·pert M
Paradur® X·pert M
MF
UNC
UNC
UNF
DIN 374 6GXDN
P mm
l1js16 mm
Lcmm
d1h9
mm
B
h12 mm
l9mm N
TIN designation M2158305
d1
Lcl1
DN
l9
P M 8 1 90 12 6 4,9 8 3 -M8X1M 10 1 90 12 7 5,5 8 3 -M10X1M 12 1 100 13 9 7 10 4 -M12X1M 12 1,5 100 13 9 7 10 4 -M12X1.5M 14 1 100 15 11 9 12 4 -M14X1M 14 1,5 100 15 11 9 12 4 -M14X1.5M 16 1 100 15 12 9 12 4 -M16X1M 16 1,5 100 15 12 9 12 4 -M16X1.5
DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
VAP designation
M22513
TIN designation M2251305
d1
Lcl3
l1
DN
l9
P No. 2-56 2,184 45 4 12 2,8 2,1 5 3 -UNC24 -UNC24
No. 3-48 2,515 50 4 12,5 2,8 2,1 5 3 -UNC3 -UNC3No. 4-40 2,845 56 6 18 3,5 2,7 6 3 -UNC4 -UNC4No. 5-40 3,175 56 6 18 3,5 2,7 6 3 -UNC5 -UNC5No. 6-32 3,505 56 6,5 20 4 3 6 3 -UNC6 -UNC6No. 8-32 4,166 63 7 21 4,5 3,4 6 3 -UNC8 -UNC8No. 10-24 4,826 70 8 25 6 4,9 8 3 -UNC10 -UNC10No. 12-24 5,486 80 10 30 6 4,9 8 3 -UNC12 -UNC121/4-20 6,35 80 10 30 7 5,5 8 3 -UNC1/4 -UNC1/4
4 without thread taper
DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
VAP designation
M22563
TIN designation M2256305
d1
Lcl1
DN
l9
P 5/16-18 7,938 90 13 - 6 4,9 8 3 -UNC5/16 -UNC5/163/8-16 9,525 100 15 - 7 5,5 8 3 -UNC3/8 -UNC3/87/16-14 11,113 100 15 - 8 6,2 9 3 -UNC7/16 -UNC7/161/2-13 12,7 110 18 - 9 7 10 4 -UNC1/2 -UNC1/29/16-12 14,288 110 20 - 11 9 12 4 -UNC9/16 -UNC9/165/8-11 15,875 110 20 - 12 9 12 4 -UNC5/8 -UNC5/83/4-10 19,05 125 25 - 14 11 14 4 -UNC3/4 -UNC3/47/8-9 22,225 140 25 - 18 14,5 17 4 -UNC7/8 -UNC7/81-8 25,4 160 30 - 18 14,5 17 4 -UNC1 -UNC11 1/8-7 28,575 180 35 - 22 18 21 5 -UNC1.1/81 1/4-7 31,75 180 35 - 22 18 21 5 -UNC1.1/41 1/2-6 38,1 200 40 - 28 22 25 5 -UNC1.1/2
DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
VAP designation
M23513
TIN designation M2351305
d1
Lcl3
l1
DN
l9
P No. 6-40 3,505 56 6,5 20 4 3 6 3 -UNF6 -UNF6No. 8-36 4,166 63 7 21 4,5 3,4 6 3 -UNF8 -UNF8No. 10-32 4,826 70 8 25 6 4,9 8 3 -UNF10 -UNF10No. 12-28 5,486 80 10 30 6 4,9 8 3 -UNF12 -UNF121/4-28 6,35 80 10 30 7 5,5 8 3 -UNF1/4 -UNF1/4
NEW2012
NEW2012
NEW2012
NEW2012
149Walter Prototyp – Threading
ORDERING INFORMATION
Paradur® X·pert M
Paradur® X·pert M
Paradur® X·pert M
Paradur® X·pert M
UNF
UN - 8
G
EgM
DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
d1h9
mm
B
h12 mm
l9mm N
VAP designation
M23563
TIN designation M2356305
d1
Lcl1
DN
l9
P 5/16-24 7,938 90 13 6 4,9 8 3 -UNF5/16 -UNF5/163/8-24 9,525 100 15 7 5,5 8 3 -UNF3/8 -UNF3/87/16-20 11,113 100 15 8 6,2 9 3 -UNF7/16 -UNF7/161/2-20 12,7 100 13 9 7 10 4 -UNF1/2 -UNF1/29/16-18 14,288 100 15 11 9 12 4 -UNF9/16 -UNF9/165/8-18 15,875 100 15 12 9 12 4 -UNF5/8 -UNF5/83/4-16 19,05 110 17 14 11 14 4 -UNF3/4 -UNF3/47/8-14 22,225 125 18 18 14,5 17 4 -UNF7/8 -UNF7/81-12 25,4 140 20 18 14,5 17 5 -UNF1 -UNF1
DIN 2184-1 2B DN-PNom
DNmm
l1js16 mm
Lcmm
d1h9
mm
B
h12 mm
l9mm N
VAP designation
M225632
d1
Lcl1
DN
l9
P 1-8 25,4 160 30 18 14,5 17 4 -UN11 1/8-8 28,575 180 30 22 18 21 4 -UN1.1/81 1/4-8 31,75 180 30 22 18 21 4 -UN1.1/41 3/8-8 34,925 200 30 28 22 25 5 -UN1.3/81 1/2-8 38,1 200 30 28 22 25 5 -UN1.1/21 5/8-8 41,275 200 33 32 24 27 5 -UN1.5/81 3/4-8 44,45 200 33 36 29 32 6 -UN1.3/41 7/8-8 47,625 225 36 36 29 32 6 -UN1.7/82-8 50,8 225 36 40 32 35 6 -UN2
DIN 5156 DNNom
DNmm
Threads per inch
l1js16 mm
Lcmm
d1h9
mm
B
h12 mm
l9mm N
VAP designation
M24563
TIN designation M2456305
d1
Lcl1
DN
l9
P G 1/8 9,728 28 90 12 7 5,5 8 3 -G1/8 -G1/8G 1/4 13,157 19 100 15 11 9 12 4 -G1/4 -G1/4G 3/8 16,662 19 100 15 12 9 12 4 -G3/8 -G3/8G 1/2 20,955 14 125 18 16 12 15 4 -G1/2 -G1/2G 5/8 22,911 14 125 18 18 14,5 17 4 -G5/8G 3/4 26,441 14 140 20 20 16 19 5 -G3/4 -G3/4G 7/8 30,201 14 150 20 22 18 21 5 -G7/8G 1 33,249 11 160 22 25 20 23 5 -G1 -G1
DIN 40 435 6H mod DNNom
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
VAP designation
M205049
d1
Lcl3
l1
DN
l9
P EG M 2,5 0,45 56 6 18 3,5 2,7 6 3 -EGM2.5EG M 3 0,5 63 7 21 4,5 3,4 6 3 -EGM3EG M 4 0,7 70 8 25 6 4,9 8 3 -EGM4EG M 5 0,8 80 10 30 6 4,9 8 3 -EGM5EG M 6 1 90 12 35 8 6,2 9 3 -EGM6EG M 8 1,25 100 15 39 10 8 11 3 -EGM8
NEW2012
NEW2012
NEW2012
NEW2012
ORDERING INFORMATION
150 Walter Prototyp – Threading
DIN 40 435 6H mod DNNom
P mm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
VAP designation M205549
d1
Lcl1
DN
l9
P EG M 10 1,5 100 13 - 9 7 10 4 -EGM10EG M 12 1,75 110 20 - 11 9 12 4 -EGM12EG M 14 2 110 20 - 12 9 12 4 -EGM14EG M 16 2 125 25 - 14 11 14 4 -EGM16
Paradur® X·pert M
Paradur® X·pert M
Paradur® HT
EgM
EgUNF
M
DIN 2184-1 3B DN-PNom
DNmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
VAP designation
M235049
d1
Lcl3
l1
DN
l9
P EG no. 10-32 5,857 80 10 30 6 4,9 8 3 -EGUNF10EG 1/4-28 7,528 90 12 35 8 6,2 9 3 -EGUNF1/4
DIN 376 ISO/6H DNNom
Pmm
l1js16 mm
Lcmm
l3±1
mm
d1h9
mm
B
h12 mm
l9mm N
TIN designation
2036115
d1
Lcl1
DN
l9
P M12 1,75 110 23 - 9 7 10 3 -M12M14 2 110 25 - 11 9 12 3 -M14M16 2 110 25 - 12 9 12 3 -M16M20 2,5 140 30 - 16 12 15 4 -M20M22 2,5 140 30 - 18 14,5 17 4 -M22M24 3 160 36 - 18 14,5 17 4 -M24M27 3 160 36 - 20 16 19 4 -M27M30 3,5 180 42 - 22 18 21 4 -M30M36 4 200 48 - 28 22 25 4 -M36
NEW2012
NEW2012
NEW2012
New addition to range
151Walter Prototyp – Threading
ORDERING INFORMATION
Protodyn® HSC/solid carbide thread former – chamfer form C
Protodyn® S HSC/solid carbide thread former – chamfer form C
Protodyn® S HSC/solid carbide thread former – chamfer form E
Protodyn® S HSC/solid carbide thread former – chamfer form C
M
M
M
MF
DIN2174 6HXDN
Pmm
l1js16mm
Lcmm
l3±1
mm
d1h6
mm
B
h12mm
l9mm
TICNdesignationHP8061106
d1
Lcl3
l1
DN
l9
P M 3 0,5 56 10 – 3,5 2,7 6 -M3
M 4 0,7 63 13 – 4,5 3,4 6 -M4
M 5 0,8 70 16 – 6 4,9 8 -M5
M 6 1 80 15 30 6 4,9 8 -M6
M 8 1,25 90 18 35 8 6,2 9 -M8
M 10 1,5 100 20 39 10 8 11 -M10
DIN2174 6HXDN
Pmm
l1js16mm
Lcmm
l3±1
mm
d1h6
mm
B
h12mm
l9mm
TICNdesignationHP8061716
d1
Lcl3
l1
DN
l9
P M 6 1 80 15 30 6 4,9 8 -M6
M 8 1,25 90 18 35 8 6,2 9 -M8
M 10 1,5 100 20 39 10 8 11 -M10
DIN2174 6HXDN
Pmm
l1js16mm
Lcmm
l3±1
mm
d1h6
mm
B
h12mm
l9mm
TICNdesignationHP8061816
d1
Lcl3
l1
DN
l9
P M 6 1 80 15 30 6 4,9 8 -M6
M 8 1,25 90 18 35 8 6,2 9 -M8
M 10 1,5 100 20 39 10 8 11 -M10
DIN2174 6HXDN
Pmm
l1js16mm
Lcmm
l3±1
mm
d1h6
mm
B
h12mm
l9mm
TICNdesignationHP8166716
d1
Lcl1
DN
l9
P M 8 1 90 12 – 6 4,9 8 -M8X1
M 10 1 90 14 – 7 5,5 8 -M10X1
M 12 1,5 100 21 – 9 7 10 -M12X1.5
M 14 1,5 100 21 – 11 9 12 -M14X1.5
M 16 1,5 100 21 – 12 9 12 -M16X1.5
ORDERING INFORMATION
152
TMO/orbital thread mill ≤2 x DN
TMO/orbital thread mill ≤3 x DN
M-MF
M-MF
Pmm
Dcmm
Lcmm
l3±1
mmd2
mml1
mml4
mm
d1h6
mm Z
TICNdesignationH5087016
d1
DC d2
Lcl3
l4l1
M 5 0,8 4 2,4 11,2 2,9 57 21 6 3 -M5
M 6 1 4,8 3 13,5 3,4 57 21 6 3 -M6
M 8 1,25 6,4 3,75 17,9 4,7 63 27 8 3 -M8
M 10 1,5 8,2 4,5 22,3 6,16 72 32 10 4 -M10
M 12 1,75 9,5 5,25 26,7 7,13 72 27 10 5 -M12
Pmm
Dcmm
Lcmm
l3±1
mmd2
mml1
mml4
mm
d1h6
mm Z
TICNdesignationH5088016
d1
DC d2
Lcl3
l4l1
M 5 0,8 4 2,4 16,2 2,9 57 21 6 3 -M5
M 6 1 4,8 3 19,5 3,4 60 24 6 3 -M6
M 8 1,25 6,4 3,75 25,88 4,7 68 27 8 3 -M8
TURNING Walter ¤3¤
ISOturning ¤4¤
Grooving ¤14¤
Orderinginformation ¤20¤
DRILLINGANDTHREADING WalterTitex ¤39¤
Solidcarbidedrills ¤40¤
PCDdrills ¤56¤
Orderinginformation ¤58¤
Walter ¤91¤
Drills ¤92¤
Counterboredrills ¤96¤
Precisionboring ¤97¤
Orderinginformation ¤98¤
WalterPrototyp ¤103¤
HSS-E-PMtaps ¤104¤
HSS-Etaps ¤106¤
Solidcarbidethreadformers ¤110¤
Solidcarbidethreadmills ¤112¤
Orderinginformation ¤114¤
MILLING WalterPrototyp ¤155¤
Solidcarbideendmills ¤156¤
Ball-noseendmills ¤162¤
Orderinginformation ¤166¤
Walter ¤177¤
Thenewgenerationofcutters ¤179¤
Cuttingtoolmaterials ¤182¤
Facemills ¤186¤
Copymills ¤190¤
Orderinginformation ¤192¤
Walteradaptors ¤217¤
Adaptors ¤218¤
Orderinginformation ¤220¤
Alphanumericindex ¤228¤
_TOOLINNOVATIONSINMILLING
Withaninternalcoolantsupplyforthebestresults.
ProductinnovationsEdition2012-2
Milling
156
SOLIDCARBIDEENDMILLS
Walter PrototypProto·max™Inox–anewspecialistintheProto·max™family.
THETOOL
– Solidcarbidehigh-performanceendmillspeciallydesignedformachiningstainlessmaterials
– Withandwithoutcornerradius– FromR=0.5upto4mm– Diameterrangefrom6to20mm– Asymmetricalhelixangleonalternatingflutes35°/38°
– 4cuttingedges– ShankinaccordancewithDIN6535HAandHB– TAAcoating
THEAPPLICATION
– PrimaryapplicationISOmaterialgroupM– Forroughingandfinishing– Whenahighmachiningvolumeisrequired– Fullgroovesupto1xDcforcomponentsmadefromstainlessmaterials
– Pocketmilling,inclinedplungingandcontourmilling– Particularlysuitedtomachineswithaninternalcoolantsupply
– Foruseingeneralengineering,theenergyindustry,themedicalindustryandtheaerospaceindustry
YOURADVANTAGES
– Maximummachiningvolumeupto50%higherincomparisonwithstandardtools
– Longfeedupto1xDcinstainlessmaterials– Low-vibrationrunningduetospecialasymetricalhelixangleonalternatingflutesandthereforeoptimumsurfacefinishquality
– Softcuttingactionduetooptimisedmicrogeometry– Ahighlevelofprocessreliabilityduetooptimumchipevacuation;asaresultoftheinternalcoolantsupply
– Maximumtoollifeduetostate-of-the-artTAAcoat-ingandinternalcoolantsupply
TAAcoating
Optimisedmicrogeometryforstablecuttingedge
35°/38°Anglereducesasymmetricalhelixforfewervibrationsandincreasesalongtoollife
2helicalcoolantchannelsforimprovedchipevacuationandalongertoollife
NEW2012
Orderinginformationcanbefoundfrompage¤166¤onwards.
157WalterPrototyp–Milling
Proto·max™Inoxhigh-performanceendmill H2034217
Slide(pocketmilling)
Cuttingdata
Competitors Proto·max™ InoxØ 16mm 16mmz 4 4ae 1-16mm 1-16mmap 6-10mm 6-10mmvc 130m/min 130m/minN 2586rpm 2586rpmfz 0.034mm 0.034mmvf 352mm/min 352mm/min
Toollifeinminutes
0
Competition
Proto·max™ Inox 275 min
+150%
110min
Workpiecematerial: X5CrNi1810(1.4301),ISOMTool: Proto·max™Inox
H2034217-16
Theresult:Low-vibrationrunningresultsinalongertoollifeduetoanasymmetricalhelixangles,internalcoolingandanewcoating.
50 100 150 250 300200
Shanktoleranceh5
Watchproductvideo:ScanQRcode
orgodirectlytohttp://goo.gl/UaA3n
158
SOLIDCARBIDEENDMILLS
Walter PrototypConeFit™withnewcylindricalshanks.
Orderinginformationcanbefoundfrompage¤167¤onwards.
Solidcarbideshank Monoblocktoolholder Steelshank
YOURADVANTAGES
– Modulardesignwithdifferentshankvariants– Extremelywidevarietyofdifferenttoolgeometries– Extremelyhighlevelofstabilityandprecisionduetoplanarandtaperedcontactsurfacewithpatentedself-centringthread
– Longtoollifeingraphitemachiningapplicationsduetospecialdiamondcoatingandnewgeometries
– LargechipclearanceonnewSpadevariant
THETOOLSYSTEM
– Modularsolidcarbidemillingsystemwithself-centringthread(patentpending)
– Extremelyhighconcentricityduetoconicalcentring– Theaxialsupportfaceprovidesmaximumrigidity– Diameterrangefrom10to25mm– Widerangeofhigh-performance,changeableheads– Steelandsolidcarbideshanksindifferentdesignsandlengthsinmmandinches
– TAXcoatedNewtotheproductrange:
– Toolsformachininggraphitewithdiamond(DIA)coating– MonoblockadaptorsinHSK63,SK40,MASBT40andCaptoC5andC6
– Newcylindricalsteelandsolidcarbideadaptors(orderinginformationfrompage¤227¤onwards)
– Proto·max™STnowalsowithConeFit™interface– ToolsavailableasSpadevariant
THEAPPLICATION
– FortheISOmaterialgroupsP,M,K,N,S,O– Forroughingandfinishingofallcontoursandmachininganextremelywidevarietyofdifferentshapes
– Foruseingeneralengineering,theautomotiveindustry,energyindustry,aerospaceindustryandmouldanddiemaking
SPADE
– Low-costSpadetypevariant– Directlyextrudedincludingchipclearance
– Diameterrangefrom10to16mm
THEAPPLICATION
– Plungemilling,chamfering,centre-markingorspot-facingofholes
Low-costSpadetypevariantwithsinteredflutes
N102ball-noseendmillcuttingedges H1E0111
Watchproductvideo:ScanQRcode
orgodirectlytohttp://goo.gl/ExAPc
NEW
159
SOLIDCARBIDEENDMILLS
Walter PrototypConeFit™–extendedproductrange.
WalterPrototyp–Milling
VARIANTSFORGRAPHITEMACHINING
N504cuttingedgeswithcornerradius
N102cuttingedgesBall-noseendmill
SPADEVARIANTS
N102cuttingedgeswithcornerradius
N102cuttingedgesBall-noseendmill
Profiles2cuttingedges,chamfermillandcentredrill
Flash2cuttingedgesHifeedcutter
OptimisedmicrogeometryspeciallydevelopedforISOPmaterials
Proto·max™STwithConeFit™interface H4E34217metricH4E38217metric
withcornerradius
TAZcoating
4cuttingedgeswithunevenspacing
ConeFit™interface
Watchproductanimation:ScanQRcodeorgodirectlyto
http://goo.gl/TjoOe
160
SOLIDCARBIDESPECIALPURPOSEMILLS
SafetyFirst–Safe-LockTMsystem*withpull-outprotection.
NEW2012
Shanktoleranceh6forshrink-fitchucks
Optionalcoolantchannels
Dogelementsforpositiveconnection
*Haimersystem
3or6helicallygroundgrooves
YOURADVANTAGES
– Extendedtoollife– Particularlysuitableforhigh-precisioncomponents– Nodamagetotheworkpieceormachineasaresultoftoolsbeingpulledout
– Highcuttingefficiencyduetohightorqueandpositivedogconnection
– Connectioneliminatesneedforreducedcuttingdata
THESAFE-LOCK™SYSTEM
– WalterisnowsupplyingspecialpurposemillingcutterswiththeSafe-LockTMinterface
– Newpositivelockingsolutionforparallelshanks– 3or6helicalgroovesgroundintotheshank– Preventsthetoolfrombeingpulledoutasaresultofmicrocreep:occursduringmachiningathighrotationalspeedswithhighpull-outforces.Evenchuckswithanextremelyhighretentionforceareun-abletopreventmicrocreep
– Dogelementsinsidethechuckgripthegroovesinthetoolshank– Inadditiontothefrictionalclampingforcesoftheshrink-fitchuck,thetoolisheldbyapositiveinterlockingconnection
THEAPPLICATION
– Forhigh-performancemachining– Suitableforuseinallpreliminaryandroughingoperationsandevenfinishingtasks
– Whereahighlevelofaccuracyonthecomponentisrequired– Foruseintheaerospaceindustry,energyindustry,mouldanddiemakingandgeneralengineering
Watchproductvideo:ScanQRcodeorgodirectlyto
http://goo.gl/1pRVR
161WalterPrototyp–Milling
WALTERXPRESSMILLINGCUTTERS
– Protostar®solidcarbideendmills,e.g.typeN,typeAl,ToughGuys,etc.
– Helixangle25°to50°– Diametersfrom3mmto25mm– Batchsizesof3to100pcs.– ShankvariantsDIN6535HA,HB,HE– NowalsowithHaimerSafe-Lock™groovesNEW
Positivefitduetohelicalgroovesanddogelementsintheadaptor.
WHATISWALTERXPRESS?
WalterXPressisarapidorderinganddeliveryservicefromWalterforWalterTitexandWalterPrototypspecialtools.WalterXPresscoversadefinedrangeofspecialtools.Forthesetools,weguaranteeashortdeliverytimeofamaxi-mumoftwoweeksfromthetimeoforderintake.
YOURADVANTAGES
– Reducedproductioncostsbecauseoflesscomponentre-working
– Reliablemanufacturingofmoldsanddieseveninun-mannedoperations
– Highdegreeofradiusaccuracyachieveshighprecisionincomponentdimensions
– NewTAScoatingdeliversexceptionaltoollifecomparedwithotherstandardproductsonthemarket
– Highlevelofcuttingefficiencyinroughingoperations– Excellentsurfacequalityforfinishingandfinefinishingoperationsduetolowwear
– Canbeuseduniversallywithdry,wetandMQLmachining– Verystableandthereforereliablemachining
162
BALL-NOSEENDMILLS
Walter PrototypProto·max™UltraStandardandMini–outstandingeveninthesmallestofspaces.
WalterPrototyp–Milling
THETOOL
– SolidcarbideHPCball-noseendmillsspeciallydesignedformachininghardenedmaterials
– Diameterrangefrom0.1to2.5mmforMinitoolrange
– Diameterrangefrom3to12mmforstandarddimensions
– L/Dratioofupto10xDc
– Helixangle=30°– Reinforcedcuttingedges– 2cuttingedges– ShankinaccordancewithDIN6535HA– Withreducedneck(d2)forMinitools– Optimisedtransitionsfromnecktoshanktokeepthetoolsasrigidaspossible
– NewTAScoating
THEAPPLICATION
– FormachiningISOmaterialgroupH– Formachiningworkpieceswithahardnessofupto70HRC
– Forsemi-roughingandroughingaswellassemi-finishingandfinefinishing
– Idealwhenahigh-qualitysurfacefinishisrequired– Formachining3-Dfreeformsurfaces,withZcon-stantandin5-axissimultaneousmillingoperations
– Minimachiningoperationsevenwithhighprojec-tionlengthsfordeepcavities
– Foruseinmouldanddiemakingandgeneralengineering
Proto·max™Ultra–HPCball-noseendmillMini H4046988metric
Cutterdiametermarkingonendfaceforbetter
concentricity
Toleranceh4
30°helixangle
Optimisedmicrogeometryformorestablecuttingedge
2cuttingedges
REDUCEDNECKThespeciallydesigned,solidreducedneckhelpstopreventthetoolfromwearingagainstthecomponent.Thecuttingedgemaintainsaclearanceeveninlargecavities.
Ø0.1-2.5mm
Veryrigidtransitions
Reducedneck
TAScoating
Orderinginformationcanbefoundfrompage¤171¤onwards.
163WalterPrototyp–Milling
Finishmillingofhardenedtoolsteel
CuttingdataØ 10mmz 2ae 1.8mmap 0.6mmvc 220m/minN 7000rpmfz 0.17mmvf 2380mm/min
Workpiecematerial: X155CrVMo12-1(1.2379),ISOHHardness: 62HRCTool: Proto·max™Ultra
H8004788-10-72
Theresult:Noticeablylowertoolwearforlongertoollifeandbettersurfacequality.
Proto·max™Ultra–HPCBall-noseendmillStandard H8004788metric
Optimisedmicrogeometryformorestablecuttingedge
Cornerradius
30°helixangle
Toleranceh5
Cutterdiametermarkingonendface
Inscription-freeshankforbetter
concentricity
Toollife(m)10 20 30 400
0.2
0.15
0.1
0.05
Wid
tho
fw
ear
mar
ksV
b(m
m)
Proto·max™Ultra
Competition
Ø3-12mm
2cuttingedges
Watchproductvideo:ScanQRcode
orgodirectlytohttp://goo.gl/Zu7C8
TAScoating
U=Proto·maxU
Diameter
UØ6-R3
YOURADVANTAGES
– Maximummachiningvolumeofupto50%moreincom-parisontotheusual3and4-flutetoolsonthemarket
– Longfeedupto2xDcinsteelmaterials– Unevenspacingforlowspindlestress– Softcuttingactionandoptimumchiptransportduetolargehelixangle
– Canbeusedfordryandwetmachining– IncreasedtoollifewiththelatestTAZcoating– Backcuttingreducestransitionswhensidefacemachin-ingontheworkpiece
– Highlevelofprocessstabilityduetostablecoreandoptimisedmicrogeometry
164
SOLIDCARBIDEENDMILLS
Walter PrototypProto·max™STSolidcarbidehigh-performanceendmillformachiningsteel.
THETOOL
– Solidcarbidehigh-performanceendmillspeciallydesignedformachiningsteelmaterials
– Withandwithoutcornerradius– Diameterrangefrom2to20mmfromR=0.2to4mm
– Helixangle =45°and50°– Reinforcedcorediameter– 3and4cuttingedges– Withreducedneck(d2)andbackcutting– TAZcoating– ShankaccordingtoDIN6535HA– Newtotheproductrange:ShankaccordingtoDIN6535HBwithh5toleranceandConeFit™interface
THEAPPLICATION
– PrimaryapplicationISOmaterialgroupP– SecondaryapplicationISOmaterialgroupM– Forroughingandfinishing– Whenahighmachiningvolumeisrequired– Fullgroovesof2xDc(z=3)and1.5xDc(z=4)– Pocketmilling,inclinedplungingandcontourmilling
– Foruseingeneralengineering,theautomotiveindustryandmouldanddiemaking
Proto·max™ST–high-performanceendmill H4033217metric H4036217metric withprotectionradius
Shankwithspecialsurfacetreatmentforabettergrip>Ø10mm
45°helixangleforasoftcuttingaction
Optimisedmicrogeometryforstablecuttingedge
3cuttingedges
Backcutting
WalterPrototyp–Milling
ShanknowalsoaccordingtoDIN6535HBwithatoleranceofh5
TAZcoating
Orderinginformationcanbefoundfrompage¤173¤onwards.
Watchproductvideo:ScanQRcode
orgodirectlytohttp://goo.gl/WLhgN
OptimisedmicrogeometryspeciallydevelopedforISOPmaterials
165
Proto·max™STwithConeFit™interface H4E34217metric H4E38217metricwithcornerradius
Proto·max™ST–high-performanceendmill H4034217metric H4038217metric withcornerradius
Shankwithspecialsurfacetreatmentforabettergrip>Ø10mm
Optimisedmicrogeometryforstablecuttingedge
4cuttingedgeswithunevenspacing
50°helixangleforoptimumchipevacuation
Unevencuttingedgespacingα<β
Backcutting
WalterPrototyp–Milling
Forminsert
Cuttingdata
Previously Proto·max™STØ 16mm 16mmz 4 4ae 16mm 16mmap 13mm 22 mmvc 160m/min 160m/minN 3180rpm 3180rpmfz 0.08mm 0.08mmvf 1018mm/min 1018mm/min
MachinedvolumeQ[cm3/min]
0
Previously
Proto·max™ ST ap = 22 mm
+70%
ap=13mm
Workpiecematerial: X33CrS16(1.2085)Tensilestrength: 1000N/mm2
Tool: Proto·max™STH4034217-16
Theresult:Highlevelofprocessstabilityandproductivityduetoreducedwearwithhighermetalremovalrates.
5 10 15 2520
TAZcoating
TAZcoating
4cuttingedgeswithunevenspacing
ConeFit™interface
ORDERING INFORMATION
166 Walter Prototyp – Milling166166
Proto·max™Inox high-performance end mills
Proto·max™Inox – End mills
Dch10 mm
Lcmm
l1mm
l4mm
d1h5mm
z
TAADIN 6535 HADesignation H2034217
TAADIN 6535 HBDesignation H2134217
d1
Lcl4
l1
Dc
6 13 57 21 6 4 -6 -
8 19 63 27 8 4 -8 -
10 22 72 32 10 4 -10 -10
12 26 83 38 12 4 -12 -12
14 26 83 38 14 4 -14 -14
16 32 92 44 16 4 -16 -16
18 32 92 44 18 4 -18 -18
20 38 104 54 20 4 -20 -20
Proto·max™Inox – End mills with corner radius
Dch9
mm
Rmm
Lcmm
l1mm
l4mm
d1h6
mmz
TAADIN 6535 HADesignation
H2038217
TAADIN 6535 HBDesignation
H2138217
d1
Lcl4
l1
Dc
R 6 0,5 13 57 21 6 4 -6-0.5 -6 1 13 57 21 6 4 -6-1 -8 0,5 19 63 27 8 4 -8-0.5 -8 1 19 63 27 8 4 -8-1 -8 2 19 63 27 8 4 -8-2 -10 0,5 22 72 32 10 4 -10-0.5 -10-0.5
10 1 22 72 32 10 4 -10-1 -10-1
10 2 22 72 32 10 4 -10-2 -10-2
10 3 22 72 32 10 4 -10-3 -10-3
12 0,5 26 83 38 12 4 -12-0.5 -12-0.5
12 1 26 83 38 12 4 -12-1 -12-1
12 2 26 83 38 12 4 -12-2 -12-2
12 3 26 83 38 12 4 -12-3 -12-3
16 0,5 32 92 44 16 4 -16-0.5 -16-0.5
16 1 32 92 44 16 4 -16-1 -16-1
16 2 32 92 44 16 4 -16-2 -16-2
16 3 32 92 44 16 4 -16-3 -16-3
20 1 38 104 54 20 4 -20-1 -20-1
20 2 38 104 54 20 4 -20-2 -20-2
20 3 38 104 54 20 4 -20-3 -20-3
20 4 38 104 54 20 4 -20-4 -20-4
NEW2012
NEW2012
167Walter Prototyp – Milling
ORDERING INFORMATION
Roughing end mills
SpadeFlash 2-flute – ConeFit™ – metric
Dch12mm
Rmm
apfmm
xfmm
Rfmm
Rersmm
Lcmm
d2mm
l1mm
l4mm
SW mm d1 z
TAXDesignation
H1E92718
Lcl4
l1
apf SW d1
d2
Dc
X
R
Rf
x f
X
10 1,5 0,3 1,7 5 1,99 8 9,7 23 11,8 6 E10 2 -E10-10
12 1,5 0,8 2,25 6 2,1 10 11,7 27,8 14 8 E12 2 -E12-12
16 2 1 3,1 8 2,747 13 15,5 35,1 18,1 10 E16 2 -E16-16
End mills
Proto·max™ ST – 4-flute – ConeFit™ – metric
Dch9
mm
Lcmm
d2mm
l1mm
l4mm
SW mm d1 z
TAZDesignation H4E34217
Lcl4
l1
d2
SW d1
Dc
10 4,75 9,7 23,6 12,4 8 E10 4 -E10-10
12 5,75 11,7 28,3 14,5 10 E12 4 -E12-12
16 7,5 15,5 35,7 18,7 12 E16 4 -E16-16
20 9,85 19,3 40,8 21,3 16 E20 4 -E20-20
End mill with corner radius
Proto·max™ ST – 4-flute – ConeFit™ – metric
Dch9
mm
R mm
Lcmm
d2mm
l1mm
l4mm
SW mm d1 z
TAZDesignation H4E38217
Dc
Lc
R
l4l1
SW d1
d2
10 0,5 4,75 9,7 23,6 12,4 8 E10 4 -E10-10-0.5
10 1 4,75 9,7 23,6 12,4 8 E10 4 -E10-10-1
10 1,5 4,75 9,7 23,6 12,4 8 E10 4 -E10-10-1.5
10 2 4,75 9,7 23,6 12,4 8 E10 4 -E10-10-2
10 3 4,75 9,7 23,6 12,4 8 E10 4 -E10-10-3
12 0,5 5,75 11,7 28,3 14,5 10 E12 4 -E12-12-0.5
12 1 5,75 11,7 28,3 14,5 10 E12 4 -E12-12-1
12 1,5 5,75 11,7 28,3 14,5 10 E12 4 -E12-12-1.5
12 2 5,75 11,7 28,3 14,5 10 E12 4 -E12-12-2
12 3 5,75 11,7 28,3 14,5 10 E12 4 -E12-12-3
12 4 5,75 11,7 28,3 14,5 10 E12 4 -E12-12-4
16 0,5 7,5 15,5 35,7 18,7 12 E16 4 -E16-16-0.5
16 1 7,5 15,5 35,7 18,7 12 E16 4 -E16-16-1
16 1,5 7,5 15,5 35,7 18,7 12 E16 4 -E16-16-1.5
16 2 7,5 15,5 35,7 18,7 12 E16 4 -E16-16-2
16 3 7,5 15,5 35,7 18,7 12 E16 4 -E16-16-3
16 4 7,5 15,5 35,7 18,7 12 E16 4 -E16-16-4
ORDERING INFORMATION
168 Walter Prototyp – Milling168
N50 4-flute – ConeFit™ – metric
Dch10mm
R mm
Lcmm
d2mm
l1mm
l4mm
SW mm d1 z
DIADesignation H3E20419
Lcl4
l1
d2
SW d1
Dc
R 10 0,5 5,5 9,7 23,6 12,4 8 E10 4 -E10-10-0.5
10 1 5,5 9,7 23,6 12,4 8 E10 4 -E10-10-1
10 1,5 5,5 9,7 23,6 12,4 8 E10 4 -E10-10-1.5
10 2 5,5 9,7 23,6 12,4 8 E10 4 -E10-10-2
12 0,5 6,5 11,7 28,3 14,5 10 E12 4 -E12-12-0.5
12 1 6,5 11,7 28,3 14,5 10 E12 4 -E12-12-1
12 1,5 6,5 11,7 28,3 14,5 10 E12 4 -E12-12-1.5
12 2 6,5 11,7 28,3 14,5 10 E12 4 -E12-12-2
SPADE - hi feedN10 2-flute – ConeFit™ – metric
Dch10mm
R mm
Lcmm
d2mm
l1mm
l4mm
SW mm d1 z
TAXDesignation
H1E12018
Lcl4
l1
SW d1
d2
Dc
R 10 0,2 8 9,7 23 11,8 6 E10 2 -E10-10-0.2
10 0,5 8 9,7 23 11,8 6 E10 2 -E10-10-0.5
10 0,8 8 9,7 23 11,8 6 E10 2 -E10-10-0.8
10 1 8 9,7 23 11,8 6 E10 2 -E10-10-1
10 1,2 8 9,7 23 11,8 6 E10 2 -E10-10-1.2
10 1,5 8 9,7 23 11,8 6 E10 2 -E10-10-1.5
10 2 8 9,7 23 11,8 6 E10 2 -E10-10-2
10 2,5 8 9,7 23 11,8 6 E10 2 -E10-10-2.5
10 3 8 9,7 23 11,8 6 E10 2 -E10-10-3
12 0,2 10 11,7 27,8 14 8 E12 2 -E12-12-0.2
12 0,5 10 11,7 27,8 14 8 E12 2 -E12-12-0.5
12 0,8 10 11,7 27,8 14 8 E12 2 -E12-12-0.8
12 1 10 11,7 27,8 14 8 E12 2 -E12-12-1
12 1,2 10 11,7 27,8 14 8 E12 2 -E12-12-1.2
12 1,5 10 11,7 27,8 14 8 E12 2 -E12-12-1.5
12 1,6 10 11,7 27,8 14 8 E12 2 -E12-12-1.6
12 2 10 11,7 27,8 14 8 E12 2 -E12-12-2
12 2,5 10 11,7 27,8 14 8 E12 2 -E12-12-2.5
12 3 10 11,7 27,8 14 8 E12 2 -E12-12-3
16 0,2 13 15,5 35,1 18,1 10 E16 2 -E16-16-0.2
16 0,5 13 15,5 35,1 18,1 10 E16 2 -E16-16-0.5
16 0,8 13 15,5 35,1 18,1 10 E16 2 -E16-16-0.8
16 1 13 15,5 35,1 18,1 10 E16 2 -E16-16-1
16 1,2 13 15,5 35,1 18,1 10 E16 2 -E16-16-1.2
16 1,5 13 15,5 35,1 18,1 10 E16 2 -E16-16-1.5
16 2 13 15,5 35,1 18,1 10 E16 2 -E16-16-2
16 3 13 15,5 35,1 18,1 10 E16 2 -E16-16-3
16 4 13 15,5 35,1 18,1 10 E16 2 -E16-16-4
Dch9
mm
R mm
Lcmm
d2mm
l1mm
l4mm
SW mm d1 z
TAZDesignation H4E38217
Dc
Lc
R
l4l1
SW d1
d2
20 0,5 9,85 19,3 40,8 21,3 16 E20 4 -E20-20-0.5
20 1 9,85 19,3 40,8 21,3 16 E20 4 -E20-20-1
20 2 9,85 19,3 40,8 21,3 16 E20 4 -E20-20-1.5
20 3 9,85 19,3 40,8 21,3 16 E20 4 -E20-20-2
20 4 9,85 19,3 40,8 21,3 16 E20 4 -E20-20-4
Proto·max™ ST – 4-flute – ConeFit™ – metric
169Walter Prototyp – Milling
ORDERING INFORMATION
Ball-nose end mill
N10 2-flute – ConeFit™ – metric
Dch10mm
R mm
Lcmm
d2mm
l1mm
l4mm
SW mm d1 z
DIADesignation
H1E01219
Dc
R SW
Lcl4
d2
d1
l1
10 5 8 9,7 23 11,8 6 E10 2 -E10-10
12 6 10 11,7 27,8 14 8 E12 2 -E12-12
SPADEN10 2-flute – ConeFit™ – metric
Dch9
mm
R mm
Lcmm
d2mm
l1mm
l4mm
SW mm d1 z
TAXDesignation
H1E01118
Dc
R SW
Lcl4
d2
d1
l1
10 5 8 9,7 23 11,8 6 E10 2 -E10-10
12 6 10 11,7 27,8 14 8 E12 2 -E12-12
16 8 13 15,5 35,1 18,1 10 E16 2 -E16-16
SPADEN10 2-flute – ConeFit™ – metric
Dch9
mm
R mm
Lcmm
d2mm
l1mm
l4mm
SW mm d1 z
Uncoated designation
H1E0111
Dc
R SW
Lcl4
d2
d1
l1
10 5 8 9,7 23 11,8 6 E10 2 -E10-10
12 6 10 11,7 27,8 14 8 E12 2 -E12-12
16 8 13 15,5 35,1 18,1 10 E16 2 -E16-16
ORDERING INFORMATION
170 Walter Prototyp – Milling170
Profiles
SPADEChamfer mill 60° – ConeFit™ – metric
αDah9
mm
Lcmm
d2mm
l1mm
l4mm
SW mm
d1mm z
TAXDesignation
H1E58518d1SW
Lcl4
Da
d2
α
l1
60° 10 7,5 9,7 23 11,8 6 10 2 -E10-10
60° 12 8 11,7 27,8 14 8 12 2 -E12-12
SPADEChamfer mill 90° – ConeFit™ – metric
αDah9
mm
Lcmm
d2mm
l1mm
l4mm
SW mm d1 z
TAXDesignation
H1E58318d1SW
Lcl4
Da
d2
α
l1
90° 10 4,5 9,7 23 11,8 6 E10 2 -E10-10
90° 12 5,5 11,7 27,8 14 8 E12 2 -E12-12
90° 16 7,5 15,5 35,1 18,1 10 E16 2 -E16-16
SPADEChamfer mill 120° – ConeFit™ – metric
αDah9
mm
Lcmm
d2mm
l1mm
l4mm
SW mm d1 z
TAXDesignation
H1E58118d1SW
Lcl4
Da
d2
α
l1
120° 10 2,7 9,7 23 11,8 6 E10 2 -E10-10
120° 12 3,3 11,7 27,8 14 8 E12 2 -E12-12
SPADEChamfer mill 150° – ConeFit™ – metric
αDah9
mm
Lcmm
d2mm
l1mm
l4mm
SW mm d1 z
TAXDesignation
H1E58018d1SW
Lcl4
Da
d2
α
l1
150° 12 1,6 11,7 23 14 8 E12 2 -E12-12
171Walter Prototyp – Milling
ORDERING INFORMATION
Proto·max™Ultra – Mini ball-nose end mill (48-70 HRC)
Dc-0,010
mm
R +0,003-0,007
mm
Lcmm
d3mm
l1mm
l3mm
l4mm
d1h4 mm
zTAS
Designation H4046988
Dcd2
d1
R
l1l4
l3Lc
0,1 0,05 0,08 0,08 45 0,15 17 4 2 -0.1-0.15
0,1 0,05 0,08 0,08 45 0,3 17 4 2 -0.1-0.3
0,1 0,05 0,08 0,08 45 0,75 17 4 2 -0.1-0.75
0,2 0,1 0,15 0,17 45 0,3 17 4 2 -0.2-0.3
0,2 0,1 0,15 0,17 45 0,6 17 4 2 -0.2-0.6
0,2 0,1 0,15 0,17 45 1 17 4 2 -0.2-1
0,2 0,1 0,15 0,17 45 1,5 17 4 2 -0.2-1.5
0,2 0,1 0,15 0,17 45 2 17 4 2 -0.2-2
0,3 0,15 0,25 0,27 45 0,45 17 4 2 -0.3-0.45
0,3 0,15 0,25 0,27 45 0,9 17 4 2 -0.3-0.9
0,3 0,15 0,25 0,27 45 1,5 17 4 2 -0.3-1.5
0,3 0,15 0,25 0,27 45 2 17 4 2 -0.3-2
0,3 0,15 0,25 0,27 45 3 17 4 2 -0.3-3
0,4 0,2 0,30 0,37 45 0,6 17 4 2 -0.4-0.6
0,4 0,2 0,30 0,37 45 1,2 17 4 2 -0.4-1.2
0,4 0,2 0,30 0,37 45 2 17 4 2 -0.4-2
0,4 0,2 0,30 0,37 45 3 17 4 2 -0.4-3
0,4 0,2 0,30 0,37 45 3,5 17 4 2 -0.4-3.5
0,4 0,2 0,30 0,37 45 4 17 4 2 -0.4-4
0,5 0,25 0,35 0,47 45 0,75 17 4 2 -0.5-0.75
0,5 0,25 0,35 0,47 45 1,5 17 4 2 -0.5-1.5
0,5 0,25 0,35 0,47 45 3 17 4 2 -0.5-3
0,5 0,25 0,35 0,47 45 5 17 4 2 -0.5-5
0,6 0,3 0,40 0,57 45 0,9 17 4 2 -0.6-0.9
0,6 0,3 0,40 0,57 45 1,8 17 4 2 -0.6-1.8
0,6 0,3 0,40 0,57 45 3 17 4 2 -0.6-3
0,6 0,3 0,40 0,57 45 5 17 4 2 -0.6-5
0,6 0,3 0,40 0,57 45 6 17 4 2 -0.6-6
0,8 0,4 0,50 0,77 45 1,2 17 4 2 -0.8-1.2
0,8 0,4 0,50 0,77 45 2,4 17 4 2 -0.8-2.4
0,8 0,4 0,50 0,77 45 4 17 4 2 -0.8-4
0,8 0,4 0,50 0,77 45 6 17 4 2 -0.8-6
1 0,5 0,80 0,96 45 1,5 17 6 2 -1-1.5
1 0,5 0,80 0,96 45 3 17 6 2 -1-3
1 0,5 0,80 0,96 45 6 17 6 2 -1-6
1 0,5 0,80 0,96 45 8 17 6 2 -1-8
1 0,5 0,80 0,96 50 10 22 6 2 -1-10
1,2 0,6 1,10 1,15 45 1,8 17 6 2 -1.2-1.8
1,2 0,6 1,10 1,15 45 3,6 17 6 2 -1.2-3.6
1,5 0,75 1,35 1,44 45 2,25 17 6 2 -1.5-2.25
Wrenches
Flat wrench – ConeFit™
E SW Type Designation
10 8 and 6 for Spade Twin head FS2124-E10
12 10 and 8 for Spade Twin head FS2125-E12
16 12 and 10 for Spade Twin head FS2126-E16
20 16 Single head FS2127-E20
25 20 Single head FS2128-E25
ORDERING INFORMATION
172 Walter Prototyp – Milling172
Proto·max™Ultra – Ball-nose end mill (48-70 HRC)
Dcmm
R ±0,005
mm
Lcmm
l1mm
l4mm
d1h5 mm
zTAS
Designation H8004788
Dc
d1
Rl4
Lc
l1
3 1,5 4,5 57 21 6 2 -3-57
3 1,5 4,5 70 34 6 2 -3-70
4 2 6 57 21 6 2 -4-57
4 2 6 70 34 6 2 -4-70
5 2,5 7,5 57 21 6 2 -5-57
5 2,5 7,5 80 44 6 2 -5-80
6 3 9 57 21 6 2 -6-57
6 3 9 90 54 6 2 -6-90
8 4 12 63 27 8 2 -8-63
8 4 12 100 64 8 2 -8-100
10 5 15 72 32 10 2 -10-72
10 5 15 100 60 10 2 -10-100
12 6 18 83 38 12 2 -12-83
12 6 18 110 65 12 2 -12-110
Proto·max™Ultra – Mini ball-nose end mill (48-70 HRC)
Dc-0,010
mm
R +0,003-0,007
mm
Lcmm
d3mm
l1mm
l3mm
l4mm
d1h4 mm
zTAS
Designation H4046988
Dcd2
d1
R
l1l4
l3Lc
1,5 0,75 1,35 1,44 45 4,5 17 6 2 -1.5-4.5
1,5 0,75 1,35 1,44 45 8 17 6 2 -1.5-8
1,5 0,75 1,35 1,44 50 12 22 6 2 -1.5-12
2 1 1,70 1,92 45 3 17 6 2 -2-3
2 1 1,70 1,92 45 6 17 6 2 -2-6
2 1 1,70 1,92 45 8 17 6 2 -2-8
2 1 1,70 1,92 50 12 22 6 2 -2-12
2 1 1,70 1,92 50 16 22 6 2 -2-16
2 1 1,70 1,92 55 20 27 6 2 -2-20
2,5 1,25 2,20 2,42 45 3,75 17 6 2 -2.5-3.75
2,5 1,25 2,20 2,42 45 7,5 17 6 2 -2.5-7.5
2,5 1,25 2,20 2,42 50 12,5 22 6 2 -2.5-12.5
2,5 1,25 2,20 2,42 50 15 22 6 2 -2.5-15
2,5 1,25 2,20 2,42 55 20 27 6 2 -2.5-20
173Walter Prototyp – Milling
ORDERING INFORMATION
Proto·max™ST high-performance end mill
Proto·max™ST – 3-flute – metric
Dch9
mm
Lcmm
d2mm
l1mm
l3mm
l4mm
d1h6
mmz
TAZ DIN 6535 HADesignation H4033217
TAZDIN 6535 HBDesignation
H4133217
Dc
Lcl3
l4l1
d1
2 5 1,92 57 7,5 21 6 3 -2 –
3 7 2,9 57 10,5 21 6 3 -3 –
4 9 3,8 57 15 21 6 3 -4 –
5 11 4,75 57 16 21 6 3 -5 –
6 13 5,7 57 19 21 6 3 -6 –
8 18 7,6 63 25 27 8 3 -8 –
10 22 9,5 72 30 32 10 3 -10 -10
12 26 11,4 83 36 38 12 3 -12 -12
16 34 15,2 92 42 44 16 3 -16 -16
20 42 19 104 52 54 20 3 -20 -20
Proto·max™ST – 4-flute – metric
Dch9
mm
Lcmm
d2mm
l1mm
l3mm
l4mm
d1h6
mmz
TAZDIN 6535 HADesignation H4034217
TAZDIN 6535 HBDesignation H4134217
Dc
Lcl3l4
l1
d1
d2 3 5 2,9 57 8,5 21 6 4 -3 –
4 7 3,8 57 11 21 6 4 -4 –
5 8 4,75 57 14 21 6 4 -5 –
6 10 5,7 57 16 21 6 4 -6 –
8 13 7,6 63 22 27 8 4 -8 –
10 16 9,5 72 28 32 10 4 -10 -10
12 19 11,4 83 33 38 12 4 -12 -12
14 22 13,3 83 36 38 14 4 -14 -14
16 26 15,2 92 42 44 16 4 -16 -16
18 29 17,1 92 42 44 18 4 -18 -18
20 32 19 104 52 54 20 4 -20 -20
Proto·max™ST – 3-flute with protective radius – metric
Dch9
mm
Rmm
Lcmm
d2mm
l1mm
l3mm
l4mm
d1h6
mmz
TAZDIN 6535 HADesignation H4036217
Dc
Lcl3
l4l1
d1
R 2 0,08 5 1,92 57 7,5 21 6 3 -2
3 0,08 7 2,9 57 10,5 21 6 3 -3
4 0,08 9 3,8 57 15 21 6 3 -4
5 0,16 11 4,75 57 16 21 6 3 -5
6 0,16 13 5,7 57 19 21 6 3 -6
8 0,16 18 7,6 63 25 27 8 3 -8
10 0,25 22 9,5 72 30 32 10 3 -10
12 0,25 26 11,4 83 36 38 12 3 -12
16 0,25 34 15,2 92 42 44 16 3 -16
20 0,4 42 19 104 52 54 20 3 -20
ORDERING INFORMATION
174
Proto·max™ST – 4-flute with corner radius – metric
Dch9
mm
Rmm
Lcmm
d2mm
l1mm
l3mm
l4mm
d1h6
mmz
TAZDIN 6535 HADesignation H4038217
TAZDIN 6535 HBDesignation
H4138217
Dc
Lcl3l4
l1
d1
d2R 3 0,2 5 2,9 57 8,5 21 6 4 -3-0,2 –
3 0,5 5 2,9 57 8,5 21 6 4 -3-0,5 –
4 0,2 7 3,8 57 11 21 6 4 -4-0,2 –
4 0,5 7 3,8 57 11 21 6 4 -4-0,5 –
5 0,5 8 4,75 57 14 21 6 4 -5-0,5 –
5 1 8 4,75 57 14 21 6 4 -5-1 –
6 0,5 10 5,7 57 16 21 6 4 -6-0,5 –
6 1 10 5,7 57 16 21 6 4 -6-1 –
8 0,5 13 7,6 63 22 27 8 4 -8-0,5 –
8 1 13 7,6 63 22 27 8 4 -8-1 –
8 2 13 7,6 63 22 27 8 4 -8-2 –
10 0,5 16 9,5 72 28 32 10 4 -10-0,5 -10-0,5
10 1 16 9,5 72 28 32 10 4 -10-1 -10-1
10 2 16 9,5 72 28 32 10 4 -10-2 -10-2
12 0,5 19 11,4 83 33 38 12 4 -12-0,5 -12-0,5
12 1 19 11,4 83 33 38 12 4 -12-1 -12-1
12 2 19 11,4 83 33 38 12 4 -12-2 -12-2
16 0,5 26 15,2 92 42 44 16 4 -16-0,5 -16-0,5
16 1 26 15,2 92 42 44 16 4 -16-1 -16-1
16 2 26 15,2 92 42 44 16 4 -16-2 -16-2
20 1 32 19 104 52 54 20 4 -20-1 -20-1
20 2 32 19 104 52 54 20 4 -20-2 -20-2
20 4 32 19 104 52 54 20 4 -20-4 -20-4
TURNING Walter ¤3 ISOturning ¤4¤
Grooving ¤14¤
Orderinginformation ¤20¤
DRILLINGANDTHREADING WalterTitex ¤39¤
Solidcarbidedrills ¤40¤
PCDdrills ¤56¤
Orderinginformation ¤58¤
Walter ¤91¤
Drills ¤92 Counterboredrills ¤96¤
Precisionboring ¤97¤
Orderinginformation ¤98¤
WalterPrototyp ¤103¤
HSS-E-PMtaps ¤104¤
HSS-Etaps ¤106¤
Solidcarbidethreadformers ¤110¤
Solidcarbidethreadmills ¤112¤
Orderinginformation ¤114¤
MILLING WalterPrototyp ¤155¤
Solidcarbideendmills ¤156¤
Ball-noseendmills ¤162 Orderinginformation ¤166¤
Walter ¤177¤
Thenewgenerationofcutters ¤179¤
Cuttingtoolmaterials ¤182¤
Facemills ¤186¤
Copymills ¤190¤
Orderinginformation ¤192¤
Walteradaptors ¤217¤
Adaptors ¤218¤
Orderinginformation ¤220¤
Alphanumericindex ¤228¤
_TOOLINNOVATIONSINMILLING
Powerful,precise,reliable
ProductinnovationsEdition2012-2
Milling
Walter–Milling
Areliablesystemisrequired,whichimpresseswithitsabsoluteprecisionandextremelylongtoollife.TheWalterBlaxx™F5041andF5141millsarebasedonanewlydeveloped,unbelievablyro-busttoolbody,whichisequippedwiththebestperformancein-sertsfromWalter:poweredbyTiger·tec®Silver.
Relyingonasystemsuchasthisgivesinnovativecompaniestheopportunitytoworktotheirstrengthsandtodevelopandproduceimpressiveproducts.
ProductivityandprocessreliabilityIfallproductionparametersneedtobeoptimisedtoensuremaximumperformance,thekeyfactorliesatthemostdistinc-tivepointintheprocesschain:thepointatwhichthetoolandtheworkpiecemeet.Thisiswhereitbecomesclearwhetherthedesiredproductqualitycanactuallybeachieved.Complexdevel-opmentscenarioscaneitherbebroughttolifeorcanfailandresultinimmensecosts.
UNBEATABLECOMBINATION:BLAXX™ANDTIGER·TEC®SILVER.
179Walter–Milling
180 Orderinginformationcanbefoundfrompage¤208¤onwards.
THENEWGENERATIONOFMILLS
Walter BlaxxTM – thenewgenerationofmills:powerful,precise,reliable.
THETOOLS
– F5041andF5141tangentialshouldermillswitha4-edgeindexableinsert
– Ø25–125mm– 2depthsofcut:8mmand12mm– 4carbidegrades:WKP25S,WKP35S,WSM35SandWSP45S–poweredbyTiger·tec®Silver
– Highradialandaxialrunoutaccuracy– Soft-cuttinggeometryduetohelicalcuttingedges– Precise90°angleonthecomponent– Specialsurfacetreatmentprovidesprotectionfromcorro-sionandwear
THEAPPLICATION
– Forallsteelandcastironworkpieces,stainlesssteelsandmaterialswithdifficultcuttingproperties
– Forshoulderandfacemilling– Suitableforallindustries,e.g.theautomotiveindustry,aerospaceindustryandgeneralengineering
YOURADVANTAGES
Maximumprocessreliabilityduetostabledesign– Largecarbidesectiontoabsorbcuttingforces– Specialtoolbodysurfacetreatmentandreinforcedcore
Highlevelofcostefficiency– Fourcuttingedgesperindexableinsert– Upto30%higherfeedratepertooth– Morecuttingedgesperdiameter
PoweredbyTiger·tec®Silver– 2CVDgrades(WKP25S,WKP35S)forsteelandcastironmachining
– 2PVDgrades(WSM35S,WSP45S)forsteel,stainlesssteelandmaterialswithdifficultcuttingproperties
Thenewgenerationofcutters–BlaxxTM Type:F5141
TangentialinsertsLNHU130608R-L55T
Wear-resistantbodyduetospecialsurfacetreatment
4usablecuttingedgesatprecisely90°
Positivecuttingbehaviour
Poweredby
181Walter–Milling
THESIZES
TangentialreliabilitywithBlaxxTMandTiger·tec® Silver
BlaxxTM:Upto30%higherfeedratesduetothetangentialarrangementoftheinserts
Workpiecematerial: GGG50,ISOKTool: Shouldermill,Ø80mm
Comparison:Feedpertoothfz[mm]
0.100 0.300.20
Previously 0.20
+ 30%
BlaxxTM with WKP25S 0.26
Cuttingdata
vc 264m/minap 8mmae 50mm
BlaxxTMF5141
– Ø40–125mm– Mediumandfinepitches– Cuttingdepth12mm– CornerradiiR0.8–R3.2mm– Insert:LNHU1306…R-L55T
BlaxxTMF5041
– Ø25–63mm– Mediumandfinepitches– Cuttingdepth8mm– CornerradiiR0.4–R2.0mm– Insert:LNHU0904…R-L55T
BlaxxTM Type:F5041.W... BlaxxTM Type:F5141.B...
PowerfulcutduetothehighcarbidevolumeincuttingforcedirectionFc
Maximumrigidityduetoalargematerialcross-sectioninthemillingbody
Fc
Watchanimation:ScanQRcode
orgodirectlytohttp://goo.gl/CesMH
182 Orderinginformationcanbefoundfrompage¤192¤onwards.
CUTTINGTOOLMATERIALS
WalterTiger·tec®Silver–extendedproductrangecoversawiderareaofapplication.
SETTINGSTANDARDSINMACHINING
ThecuttingtoolmaterialsoftheTiger·tec®
technologybrandhavebeensettingstandardsforproductivityandprocessreliabilityformanyyears.WithTiger·tec®Silver,Walterengineershavedevel-opedanunrivalled,nearperfectcuttingtoolmate-rial.TherangehasbeenextendedtoincludethenewPVD-coatedWSM35SandWSP45Sgrades.Tiger·tec®Silverisperfectforthedryandwetmachiningofsteelandcastironmaterialsaswellasstainlesssteelandmaterialswhicharedifficulttocut.Itisindispensableinimportantkeysectors:intheautomotiveindustry,railvehiclemanufacturing,powerengineering,theaerospaceindustry,generalengineeringandmouldanddiemaking.
UNPARALLELEDBENEFITS
Theuniquecoatingtechnologycombineswearresistanceandtoughnessforallsteelandcastironworkpiecesaswellasstainlesssteelandmaterialswhicharedifficulttomachineandachievesin-creasesinoutputofupto100%.ThekeybenefitsofTiger·tec®Silverare:
– Minimalformationofhairlinecracksduetoopti-mumresidualstrength
– Resistanttotribo-chemicalwearduetoperfect,smoothrakefaces
– Optimumfrictionbehaviour– OptimumcuttingdataduetoaspecialaluminiumoxidecoatingandtheTiger·tec®Silverpost-treatmentprocess
Tiger·tec®Silver Type:F4080
SelectedexamplesfromtheextensiveTiger·tec®Silverproductrange
183Walter–Milling
Watchproductvideo:ScanQRcode
orgodirectlytohttp://goo.gl/VtWEt
•Averageincreasesinoutputofupto100%duringmilling
•Extremelystablecuttingedgesforhighlevelofprocessreliability
•Extremelysmoothrakefaceforexcellenttribo-chemicalwearresistance
•Silvercolouredflankfaceforextremelyeasyweardetectionduringuse
Tiger·tec®Silver Type:F4042
184
WALTER GRADE DESIGNATION
W K P 25 STiger·tec®Silver
Rangeofapplications
2ndprimaryapplicationISOP
1stprimaryapplicationISOKWalter
CUTTINGTOOLMATERIALS
WalterTiger·tec®Silver–CVD-coatedgradesformaximumproductivityandreliablemachining.
THECOATING
– UniqueCVDaluminiumoxidecoatingtechnology– Extremehardnessandveryhightemperatureresistancecombinedwithahighdegreeoftoughness
– MaximumprocessreliabilityduetothespecialTiger·tec®Silversurfacetreatment
THECUTTINGMATERIALS
– DesignationWKP25SandWKP35S– Primaryapplicationwithsteel(ISOP)andcastironworkpieces(ISOK)
THEINDEXABLEINSERTS
ForallpopulartoolsfromtheWaltermillingprogramme,e.g.:Xtra·tec®
– F4042,F4041andF4033faceandshouldermills
– F4x53sideandfacemills– PorcupinecutterF4x38
Tiger·tec®Silver Type:WKP25S
YOURADVANTAGES
– Maximumproductivityduetoveryhighcuttingspeeds– Highlevelofprocessreliabilityduetouniquecombinationofwearresistanceandtoughness
– Reliableweardetectionduetotwo-toneTiger·tec®coating
Orderinginformationcanbefoundfrompage¤192¤onwards.
185Walter–Milling
WKP25S
1stprimaryapplication:Allsteelmaterialsathighcut-tingspeedsandmediumfeedspertooth.Strongevenunderunfavourableconditions,e.g.wetmachiningorhightensilestrengthmaterial.
2ndprimaryapplication:Millingofgreycastironorcastironwithvermiculargraphiteatmediumtohighcuttingspeedsandmediumfeedspertooth.Forunfavourableconditions,e.g.wetmachining,fluctuatingmaterialremovalorrepeatedlyinterruptedcuts.
WKP35S
1stprimaryapplication:Allsteelmaterialsatmediumtohighcuttingspeedsandmediumtohighfeedspertooth.Forunfavourableconditions,e.g.wetmachining,fluctuatingmaterialremovalorlongprojectionlength.
2ndprimaryapplication:MillingofspheroidalgraphitecastironorADImaterialsatlowtomediumcuttingspeedsandmediumtohighfeedspertooth.Forunfavourableconditions,e.g.wetmachining,fluctuatingmaterialremovalorrepeatedlyinterruptedcuts.
WKP35STiger·tec® Silver
Wearresistance
WSP45STiger·tec® Silver
WKP35STiger·tec® Silver
WKP25STiger·tec® Silver
MATERIAL:STEEL(ISOP)
Toughness
WAK15
Wearresistance
MATERIAL:CASTIRON(ISOK)
WKK25
Toughness
WKP25STiger·tec® Silver
Crankcase:Roughmachiningoftheoilsumpface
Workpiecematerial: GG25,ISOKTool: F4045/Z28/diameter200mmIndexableinsert: XNHF0705ANN-D67Cuttingtoolmaterial: WKP25S
Cuttingdata
Competition WKP25SNumberofteeth 32 28vc 150m/min 150m/minfz 0.27mm 0.32mmvf 2100mm/min 2100mm/minap 3mm 3mmae 60mm 60mm
Toollifequantitycomparisoninpieces
5000 15001000 2000
Competitor 700
+ 152%
WKP 25 S 1770
Components
186
FACEMILL
WalterPCDmillF4050–preciseandefficientmachiningofaluminium.
THETOOL
– FaceandshouldermillwithPCDcartridges– High-tensilealuminiumbasicbodyforreducedflywheeleffectandhardanodisedsurfaceforabrasionresistance
– Simpleaxialadjustmentwithµaccuracy(runout)
– Finebalancingscrewsforextremelyhighbalanceclass
– Diametersof80–200mminthestandardproductrange
– Cuttingdepthupto4mm– Withinternalcoolantsupply
THECARTRIDGES
– Inhigh-tensilesteelwithbrazedPCDblank– Integratedcarbidechipdeflector– Easy-cuttinggeometryforroughingandfinishing
– Multiplereconditioningpossible
THEAPPLICATION
– Faceandshouldermillingofnon-ferrousmetals,e.g.hypo-orhypereutecticalu-miniumalloys
– Forroughingandfinishing– Ideallysuitedtotheautomotiveindustryanditssuppliers,aswellasgeneralmechanicalengineering
YOURADVANTAGES
– Machiningtimereducedbyfastcuttingspeed– Configurationtimesreducedbyeasyadjustment– Highlevelofprocessreliabilityduetostablebody/cartridgedesign
– Lowcuttingmaterialcostsduetorepeatableregrinding– Largeselectionofgeometriesforuniversaluse
PCDmills Type:F4050
PCD-tippedcartridge
Aluminiumbasicbody
Carbidechipdeflector
Clampingscrewwithinternal
cooling
Finebalancingscrews
Orderinginformationcanbefoundfrompage¤206¤onwards.
187Walter–Milling
ClampingscrewwithSchnorrwasher
Adjustingkey
Cylinderhead
Workpiecematerial: AlSi9Cu3,ISONTool: F4050/Z18/diameter125Cartridge: FR733WCD10(PCD)
Cuttingdata
Numberofteeth 18vc 5300m/minfz 0.1mmvf 24500mm/minap 1.5mmae 60-125mm
Toollife[components]
500 1500 2500 3000
Competition 1625
+ 60%
F4050 2600
1000 2000
90°
1.7
mm
75°
1.7
mm
2.4
mm
0
THEVARIANTS
FR733WCD10:Cartridgeforshouldermilling
– Leadangle90°– Facechamferwidth1.7mm– Cuttingdepth4mm
FR734WCD10:Cartridgeforfacemilling
– Approachangle75°– Facechamferwidth1.7mm– Cuttingdepth1.1mm
FR735WCD10:Cartridgeforwiping
– IncombinationwithFR734above– Facechamferwidth2.4mm– Foroptimumsurfacequality
THEADJUSTABILITY– Adjustingkeyforµ-accurateadjustmentofrunout– Secureclampingofthecartridgebyclampingscrew– Easilyaccessibleforcartridgechange
188
FACEMILL
WalterXtra·tec®heptagoncutterF4045–increasedcostefficiencyinyourmachiningapplicationdueto14-edgeindexableinserts.
THETOOLS
– Facemills,45°leadwith14-edgeindexableinserts– Cuttingdepth4or6mm– Stableandreliableindexableinsertretentionbyclampingwedge
– Standardrangewithdiametersof63-200mm– Hard-nickelplatedsurfaceprovidesprotectionfromcorrosionandwear,andensuresbetterchipflow
THEINDEXABLEINSERTS
– 14cuttingedgesperindexableinsertwithnegativebasicshape
– Softcuttingactionduetopositivecuttingedgegeometry– Insertswithcircumferencefullyground,withsecondarycuttingedgeXNHF0705ANN…orXNHF0906ANN…orwithcornerradiusXNHF070508…orXNHF090612…
– Tiger·tec®Silvercuttingtoolmaterialsforlongesttoollife(fordetailsseepage134-137)
THEAPPLICATION
– Forallcastironmaterials,e.g.GG26Cr,CGI,…– Forfacemilling(roughing)– Ideallysuitedtotheautomotiveindustryandgeneralmechanicalengineering
YOURADVANTAGES
– Highmachiningvolume,evenfromlow-performancemachines,duetopositive,softcuttingaction
– Highlevelofprocessreliabilityduetostable,negativeindexableinserts
– Lowcuttingmaterialcostsdueto14-edgeindexableinserts
– MaximumproductivityfromtheuniversaluseofTiger·tec®andTiger·tec®Silvercoatings
Xtra·tec®facemillfamily Type:F4045
14cuttingedges
Positivegeometry
Orderinginformationcanbefoundfrompage¤205¤onwards.
CompoundscrewwithTorxPlus
Stableindexableinsertretentionbyclampingwedge
Twopitches
D27
D67
D57
189
THEGEOMETRYVARIANTS
D27–thestableone:
– Forunfavourablemachin-ingconditions
– Extremelyhighcuttingedgestability
– Highfeedrates– 10°rakeangle
D57–theuniversalone:
– Formediummachiningconditions
– Universalapplication– 10°rakeangle
D67–theeasy-cuttingone:
– Forgoodmachiningconditions
– Lowcuttingforces– Mediumfeedrates– 10°rakeangle
THEPITCHES
– Foruseonlesspowerfulmachines
– Unstableconditions– Longerprojectionlengths
– Maximumproductivityduetomaximumnumberofteeth
– Forstableconditionsandpowerfulmachines
– Shortprojectionlengths
Mediumpitch
Closepitch
Crankcase:Roughmachiningoftheoilsumpface
Workpiecematerial: GG26Cr,ISOKTool: F4045/Z28/diameter200mmIndexableinsert: XNHF0705ANN–D27Cuttingtoolmaterial: WKP25S
Cuttingdata
Numberofteeth 28vc 120m/minfz 0.26mmvf 1390mm/minap 4mmae 30-100mm
Toollife[components]
0 700 1400 28002100 3500
Competition 2200
+ 36%
F4045 3000
Components
Walter–Milling
190
COPYMILLING
WalterXtra·tec®profilemillF4031–optimumsurfacefinishduetomaximumprecision.
THETOOLS
– Profilemillwithtoricexchangeableinsert– Stableandreliableinsertretentionbyclampingscrewandprism
– WithparallelshankandmodularScrewFitinterface– Ø12–32mmor½–1¼"– Hard-nickelplatedsurfaceprovidesprotectionfromcorrosionandwear,andensuresbetterchipflow
THEINDEXABLEINSERTS
– High-precisionexchangeableinsertwithtoricbasicshape,designationP8001
– Differentcornerradiiof0.5–2mmor1/32–1/8"– Secondaryinsert<90°onthecircumferenceformachiningwalls
THEAPPLICATION
– Forallsteelandcastironmaterials,stainlessanddifficulttocutmaterials,andforhardmachining
– Forsemi-finishingandfinishingflatsurfaces– Ideallysuitableforfinishingoperationsinmoldanddiemaking
YOURADVANTAGES
– Nore-workingofflatsurfacesorshouldersduetoprecision-groundexchangeableinserts
– Highlevelofprocessreliabilityduetostableandpreciseexchangeableinsertclamping
– Reducedstoragecostsduetotheselectionoftheopti-malcuttingmaterialgradeforeachparticularapplication
– Shortermachiningtimeduetoincreasedrowwidthincomparisontosphericalcutters
Xtra·tec®profilemillingfamily Type:F4031
High-precisionexchangeableinserts
withsecondarycuttingedge
Hard-nickelplatedsurface
TorxPlusscrews
ModularScrewFitinterface
Orderinginformationcanbefoundfrompage¤212¤onwards.
191Walter–Milling
INSERTCLAMPING
Highradialandaxialrunoutaccuracyduetooptimumcentringoftheexchangeableinsertbyprismlocation
Elasticdeformationoftheclampingscrewbyeccentricallypositionedscrewheadcounter-sink
Exchangeableinsertisretainedintheprismbyscrewclamping
Testworkpiece:Finishinginrows
Workpiecematerial: 40CrMnMo7(1.2311),ISOPTool: F4031/Z2/Ø16/R1.0mmIndexableinsert: P8001–D16R10–A57Cuttingtoolmaterial: WHH15
Cuttingdata
Numberofteeth 2vc 250m/minfz 0.1mmvf 99.5mm/minap 1mmae 10mm
ComparisonofsurfacefinishachievedinRa[µm]
0 0.4 0.8 1.61.2 2.0
CompetitorB
CompetitorA
F4031
Ra[µm]
Ra = 0.44 µm
Ra=0.68µm
Ra=1.91µm
ORDERING INFORMATION
192 Walter – Milling
Positive rhombic
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K N S H
HC HC HC HC HC HC HC HC
Designationl2
mml
mms
mm α α2
r mm
b mm W
KP2
5
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
K25
WK
P25
WK
P25S
WK
P35S
WX
N15
WS
M35
WS
P45
WH
H15
b
rα2
s
α
l
l2
ADGT0803PER-D51 G 2 6,75 9,52 3,35 15° 20° 0,4 1,2 a a b c c b b c c
ADGT1204PER-D51 G 2 8,4 13,6 4,76 15° 20° 0,8 1,2 a a b c c b b c c
ADGT1606PER-D51 G 2 10,8 17,5 6,15 15° 20° 0,8 1,6 a a b c c b b c c
ADGT1807PER-D51 G 2 14,5 19 7 15° 17° 1,2 1,8 a a b c c b b c c
ADGT0803PER-D56 G 2 6,75 9,52 3,35 15° 20° 0,4 1,2 a a b c b c b b b c b c
ADGT1204PER-D56 G 2 8,4 13,6 4,76 15° 20° 0,8 1,2 a a b c b c b b b c b c
ADGT1606PER-D56 G 2 10,8 17,5 6,15 15° 20° 0,8 1,6 a a b c b c b b b c b c
ADGT1807PER-D56 G 2 14,5 19 7 15° 17° 1,2 1,8 a a b c b c b b c b c
ADKT0803PEL-F56 K 2 6,75 9,52 3,35 15° 20° 0,4 1,2 b c c c c
ADKT0803PER-F56 K 2 6,75 9,52 3,35 15° 20° 0,4 1,2 a a b c c a b b c c
ADKT10T3PER-F56 K 2 7,25 11,3 3,8 15° 15° 0,8 1,2 a a b c b c a b b c b c
ADKT1204PEL-F56 K 2 8,4 13,6 4,76 15° 20° 0,8 1,2 b c c c c
ADKT1204PER-F56 K 2 8,4 13,6 4,76 15° 20° 0,8 1,2 a a b c c a b b c c
ADKT1606PEL-F56 K 2 10,8 17,5 6,15 15° 20° 0,8 1,6 b c c c c
ADKT1606PER-F56 K 2 10,8 17,5 6,15 15° 20° 0,8 1,6 a a b c c a b b c c
ADMT080304R-D56 M 2 6,75 9,52 3,35 15° 20° 0,4 1,2 a a b c c a b b b c c
ADMT120408R-D56 M 2 8,4 13,6 4,76 15° 20° 0,8 1,2 a a b c c a b b b c c
ADMT160608R-D56 M 2 10,8 17,5 6,15 15° 20° 0,8 1,6 a a b c c a b b b c c
ADMT180712R-D56 M 2 14,5 19 7 15° 17° 1,2 1,8 a a b c c b b b c c
ADMT080302R-F56 M 2 6,75 9,52 3,35 15° 20° 0,2 1,2 b c b c c b c
ADMT080304L-F56 M 2 6,75 9,52 3,35 15° 20° 0,4 1,2 b c c c c
ADMT080304R-F56 M 2 6,75 9,52 3,35 15° 20° 0,4 1,2 a a b c b c a b b b c b c
ADMT120404R-F56 M 2 6,75 9,52 3,35 15° 20° 0,4 1,2 b c b c c b c
ADMT080308L-F56 M 2 6,75 9,52 3,35 15° 20° 0,8 1,2 b c c c c
ADMT080308R-F56 M 2 6,75 9,52 3,35 15° 20° 0,8 1,2 b c b c c b c
ADMT080312R-F56 M 2 6,75 9,52 3,35 15° 20° 1,2 1 b c b c c b c
ADMT080316R-F56 M 2 6,75 9,52 3,35 15° 20° 1,6 1 b c b c c b c
ADMT080320R-F56 M 2 6,75 9,52 3,35 15° 20° 2 1 b c b c c b c
ADMT10T304R-F56 M 2 7,25 11,3 3,8 15° 15° 0,4 1,2 b c b c c b c
ADMT10T308R-F56 M 2 7,25 11,3 3,8 15° 15° 0,8 1,2 a a b c b c a b b b c b c
ADMT10T312R-F56 M 2 7,25 11,3 3,8 15° 15° 1,2 1,2 b c b c c b c
ADMT10T316R-F56 M 2 7,25 11,3 3,8 15° 15° 1,6 1,2 b c b c c b c
ADMT10T320R-F56 M 2 7,25 11,3 3,8 15° 15° 2 1 b c b c c b c
ADMT10T325R-F56 M 2 7,25 11,3 3,8 15° 15° 2,5 1 b c b c c b c
ADMT10T330R-F56 M 2 7,25 11,3 3,8 15° 15° 3 0,8 b c b c c b c
ADMT10T332R-F56 M 2 7,25 11,3 3,8 15° 15° 3,2 0,8 b c b c c b c
ADMT120408L-F56 M 2 8,4 13,6 4,76 15° 20° 0,8 1,2 b c c c c
ADMT120408R-F56 M 2 8,4 13,6 4,76 15° 20° 0,8 1,2 a a b c b c a b b b c b c
ADMT120412R-F56 M 2 8,4 13,6 4,76 15° 20° 1,2 1,2 a b c b c b c b c
ADMT120416R-F56 M 2 8,4 13,6 4,76 15° 20° 1,6 1 b c b c c b c
ADMT120416L-F56 M 2 8,4 13,6 4,76 15° 20° 1,6 1 b c c c c
ADMT120420R-F56 M 2 8,4 13,6 4,76 15° 20° 2 1 b c b c c b c
ADMT120425R-F56 M 2 8,4 13,6 4,76 15° 20° 2,5 0,8 b c b c c b c
ADMT120425L-F56 M 2 8,4 13,6 4,76 15° 20° 2,5 0,8 b c c c c
ADMT120430R-F56 M 2 8,4 13,6 4,76 15° 20° 3 0,8 b c b c c b c
HC = Coated carbideHW = Uncoated carbide
193Walter – Milling
ORDERING INFORMATION
Positive rhombic
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K N S H
HC HC HC HC HC HC HC HC
Designationl2
mml
mms
mm α α2
r mm
b mm W
KP2
5
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
K25
WK
P25
WK
P25S
WK
P35S
WX
N15
WS
M35
WS
P45
WH
H15
b
rα2
s
α
l
l2
ADMT120430L-F56 M 2 8,4 13,6 4,76 15° 20° 3 0,8 b c c c c
ADMT120432R-F56 M 2 8,4 13,6 4,76 15° 20° 3,2 0,8 b c b c c b c
ADMT120440L-F56 M 2 8,4 13,6 4,76 15° 20° 4 0,4 b c c c c
ADMT120440R-F56 M 2 8,4 13,6 4,76 15° 20° 4 0,4 b c b c c b c
ADMT160608R-F56 M 2 10,8 17,5 6,15 15° 20° 0,8 1,6 a a b c b c a b b b c b c
ADMT160608L-F56 M 2 10,8 17,5 6,15 15° 20° 0,8 1,6 b c c c c
ADMT160612R-F56 M 2 10,8 17,5 6,15 15° 20° 1,2 1,6 b c b c c b c
ADMT160616L-F56 M 2 10,8 17,5 6,15 15° 20° 1,6 1,4 b c c c c
ADMT160616R-F56 M 2 10,8 17,5 6,15 15° 20° 1,6 1,4 b c b c c b c
ADMT160620R-F56 M 2 10,8 17,5 6,15 15° 20° 2 1,4 b c b c c b c
ADMT160625R-F56 M 2 10,8 17,5 6,15 15° 20° 2,5 1,2 b c b c c b c
ADMT160625L-F56 M 2 10,8 17,5 6,15 15° 20° 2,5 1,2 b c c c c
ADMT160630R-F56 M 2 10,8 17,5 6,15 15° 20° 3 1,2 b c b c c b c
ADMT160630L-F56 M 2 10,8 17,5 6,15 15° 20° 3 1,2 b c c c c
ADMT160632R-F56 M 2 10,8 17,5 6,15 15° 20° 3,2 1,2 b c b c c b c
ADMT160640L-F56 M 2 10,8 17,5 6,15 15° 20° 4 1 b c c c c
ADMT160640R-F56 M 2 10,8 17,5 6,15 15° 20° 4 1 b c b c c b c
ADMT160650R-F56 M 2 10,8 17,5 6,15 15° 20° 5 – b c b c c b c
ADMT160660R-F56 M 2 10,8 17,5 6,15 15° 20° 6 – b c b c c b c
ADMT180712R-F56 M 2 14,5 19 7 15° 20° 1,2 1,8 a a b c c b b b c c
Positive rhombic
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K N S H
HC HC HC HC HC HC
Designationl2
mml
mms
mm αr
mmb
mm WK
P25
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
K25
WK
P25
WK
P25S
WK
P35S
WX
N15
WS
M35
WS
P45
WH
H15
b
88˚ r
l s
l2
α
LPGW070304R-A57 G 2 6,35 7,94 3,18 11° 0,4 1,2 b b c a b b c
LPGW15T308R-A57 G 2 9,52 15 3,97 11° 0,8 1,4 b b c a b b c
LPGW150412R-A57 G 2 12,7 15,88 4,76 11° 1,2 1,6 b b c a b b c
LPMT070304R-D51 M 2 6,35 7,94 3,18 11° 0,4 1,2 a a b c b c b b c b c
LPMT15T308R-D51 M 2 9,52 15 3,97 11° 0,8 1,4 a a b c b c b b c b c
LPMT150412R-D51 M 2 12,7 15,88 4,76 11° 1,2 1,6 a a b c b c b b c b c
LPMT150612R-D51 M 2 12,7 15,88 6,35 11° 1,2 – b c b c c b c
LPMT150612R-D57 M 2 12,7 15,88 6,35 11° 1,2 – a a b c b c a b b c b c
LPMW070304TR-A27 M 2 6,35 7,94 3,18 11° 0,4 – b b c b b c
LPMW15T308TR-A27 M 2 9,52 15 3,97 11° 0,8 – b b c b b c
LPMW150412TR-A27 M 2 12,7 15,88 4,76 11° 1,2 – b b c b b c
LPMW150612TR-A27 M 2 12,7 15,88 6,35 11° 1,2 – c c
HC = Coated carbideHW = Uncoated carbide
ORDERING INFORMATION
194 Walter – Milling
Positive rhombic
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K N S H
HC HC HC HC HC HC
Designationl2
mml
mms
mm αr
mm WK
P25
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
K25
WK
P25
WK
P25S
WK
P35S
WX
N15
WS
M35
WS
P45
WH
H15
86˚ r
l
α
l2
s
MPHW120408-A57 H 2 12,7 12,7 4,76 11° 0,8 b b c a b b c
MPHX060304-A57 H 2 6,35 6,35 3,18 11° 0,4 b b c a b b c
MPHX080305-A57 H 2 8,3 8,3 3,18 11° 0,5 b b c a b b c
Positive octagonal
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K N S H
HC HC HC CN HC HC HC
Designationl
mmd
mms
mm αr
mmb
mm WK
P25
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
K25
WK
P25
WK
P25S
WK
P35S
WS
N10
WX
N15
WS
M35
WS
P45
WH
H15
d
α
b
br
s
I
OPHN050412-A57 H 8 5 12,7 4,76 11° 1,2 – a
OPHN0504ZZN-A57 H 8 5 12,7 4,76 11° 0,4 1,2 b b a b b a
Positive octagonal
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K S H
HC HC HC HC HC HC HC
Designationl
mmd
mms
mm αr
mmb
mm WK
P25
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
K25
WK
P25
WK
P25S
WK
P35S
WS
M35
WS
P45
WH
H15
d
α
b
b r
s
I
ODHW0504ZZN-A57 H 8 5 12,7 4,76 15° 0,8 1,2 b b c a b b c
ODHW0605ZZN-A57 H 8 6 15,88 5,56 15° 0,8 1,6 b b c a b b c
ODMW050408T-A27 M 8 5 12,7 4,76 15° 0,8 – b b c b b b c
ODMW060508T-A27 M 8 6 15,88 5,56 15° 0,8 – b b c b b b c
ODMW050408-A57 M 8 5 12,7 4,76 15° 0,8 – b b c a b b b c
ODMW060508-A57 M 8 6 15,88 5,56 15° 0,8 – b b c a b b b c
ODMT0504ZZN-D57 M 8 5 12,7 4,76 15° 0,8 1,2 a a b c b c b b b c b c
ODMT0605ZZN-D57 M 8 6 15,88 5,56 15° 0,8 1,6 a a b c b c b b b c b c
HC = Coated carbideCN = Silicon nitride Si3N4 HW = Uncoated carbide
195Walter – Milling
ORDERING INFORMATION
Positive triangular
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K N S H
HC HC HC HC HC HC
Designationd
mms
mm αr
mm WK
P25
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
K25
WK
P25
WK
P25S
WK
P35S
WX
N15
WS
M35
WS
P45
WH
H15
d
α
s
r P26315R10 M 3 6,75 2,78 14° 10 a a b c b c b b c b c
P26315R12 M 3 8,5 3,18 14° 12,5 a a b c b c b b c b c
P26315R15 M 3 10,5 3,97 14° 15 a a b c b c b b c b c
P26315R16 M 3 10,5 3,97 14° 16 a a b c b c b b c b c
P26315R20 M 3 12,7 4,76 11° 20 a a b c b c b b c b c
P26315R25 M 3 12,7 4,76 11° 25 a a b c b c b b c b c
P26315R31 M 3 12,7 4,76 11° 31,5 a a b c b c b b c b c
P26325R25 M 3 13 5,56 14° 25 a a b c b c a b b c b c
P26325R31 M 3 13 5,56 14° 31,5 a a b c b c a b b c b c
Positive triangular
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K N S H
HC HC HC HC HC HC HC HC
Designationd
mms
mm αr
mm WK
P25
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
P25
WK
P25S
WK
P35S
WX
N15
WS
M35
WS
P45
WH
H15
d
α
s
r P26335R10 M 3 6,75 3,18 14° 0,8 a a b c b c b b c b c
P26335R14 M 3 9,52 3,97 14° 1,2 a a b c b c b b c b c
P26335R25 M 3 13 5,56 14° 2 a a b c b c b b c b c
P26337R10 M 3 6,75 3,18 14° 0,8 b b c c b c b b c b c
P26337R14 M 3 9,52 3,97 14° 1,2 b b c c b c b b c b c
P26337R25 M 3 13 5,56 14° 2 b b c c b c b b c b c
P26339R10 M 3 6,75 3,18 14° 0,8 a a b c b c b b c b c
P26339R14 M 3 9,52 3,97 14° 1,2 a a b c b c b b c b c
P26339R25 M 3 13 5,56 14° 2 a a b c b c b b c b c
Profile mill inserts (Toric)
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K N S H
HC HC HC HC HC HC
DesignationDc
-0.03
mms
mmR
mmb
mml1
mm WK
P25
WK
P25S
WK
P35
WS
P46
WS
M35
WS
P46
WA
K15
WK
P25S
WK
P35
WX
N15
WS
M35
WS
P46
WH
H15
Dc
l1
sr
b P8001-UD4R2R-A57 H 1 12,7 2,5 0,794 1,5 7 c c c c c a
P8001-UD4R4R-A57 H 1 12,7 2,5 1,588 1,5 7 c c c c c a
P8001-UD4R8R-A57 H 1 12,7 2,5 3,175 1,5 7 c c c c c a
P8001-UD5R2R-A57 H 1 15,88 4 0,794 1,5 8 c c c c c a
P8001-UD5R4R-A57 H 1 15,88 4 1,588 1,5 8 c c c c c a
P8001-UD6R8R-A57 H 1 19,05 5 3,175 1,5 8 c c c c c a
P8001-UD6R4R-A57 H 1 19,05 5 1,588 1,5 10,2 c c c c c a
P8001-UD6R2R-A57 H 1 19,05 5 0,794 1,5 10,2 c c c c c a
P8001-UD8R2R-A57 H 1 25,4 6 0,794 1,5 10,7 c c c c c a
P8001-UD8R4R-A57 H 1 25,4 6 1,588 1,5 10,7 c c c c c a
P8001-UD8R8R-A57 H 1 25,4 6 3,175 1,5 10,7 c c c c c a
P8001-UD10R2R-A57 H 1 31,75 6 0,794 1,5 12 c c c c c a
P8001-UD10R4R-A57 H 1 31,75 6 1,588 1,5 12 c c c c c a
P8001-UD10R8R-A57 H 1 31,75 6 3,175 1,5 12 c c c c c a
ORDERING INFORMATION
196 Walter – Milling
Positive round
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K N S H
HC HC HC HC HC HC HC HC
Designationd
mms
mm αd1
mm WK
P25
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
K25
WK
P25
WK
P25S
WK
P35S
WX
N15
WS
M35
WS
P45
WH
H15
α
d1
sd
ROHX0803M0-D57 H 4 8 3,18 11° 3,4 a b c b c b c b c
ROHX10T3M0-D57 H 4 10 3,97 11° 4,4 a b c b c b c b c
ROHX1204M0-D57 H 4 12 4,76 11° 4,4 a b c b c b c b c
ROHX1605M0-D57 H 6 16 5,56 15° 5,5 a b c b c b c b c
ROHX2006M0-D57 H 8 20 6,35 15° 6,5 a b c b c b c b c
ROHX10T3M0-F67 H 4 10 3,97 11° 4,4 b c b c b c
ROHX1204M0-F67 H 4 12 4,76 11° 4,4 b c b c b c
Positive round
Tole
ranc
e cl
ass
P M K N S H
HC HC HC HC HC HC HC HC
Designationd
mms
mm αd1
mm WK
P25
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
K25
WK
P25
WK
P25S
WK
P35S
WX
N15
WS
M35
WS
P45
WH
H15
α
d1
sd
RDHW0803M0T-A27 H 8 3,18 15° 3,4 b b c b b c
RDHW10T3M0T-A27 H 10 3,97 15° 4,4 b b c b b c
RDHW1204M0T-A27 H 12 4,76 15° 4,4 b b c b b c
RDHW1605M0T-A27 H 16 5,56 15° 5,5 b b c b b c
RDHW2006M0T-A27 H 20 6,35 15° 6,5 b b c b b c
RDMT0803M0-D57 M 8 3,18 15° 3,4 a a b c b c b b c b c
RDMT10T3M0-D57 M 10 3,97 15° 4,4 a a b c b c b b c b c
RDMT1204M0-D57 M 12 4,76 15° 4,4 a a b c b c b b c b c
RDMT1605M0-D57 M 16 5,56 15° 5,5 a a b c b c b b c b c
RDMT2006M0-D57 M 20 6,35 15° 6,5 a a b c b c b b c b c
RDMW0803M0T-A27 M 8 3,18 15° 3,4 b b c b b c
RDMW10T3M0T-A27 M 10 3,97 15° 4,4 b b c b b c
RDMW1204M0T-A27 M 12 4,76 15° 4,4 b b c b b c
RDMW1605M0T-A27 M 16 5,56 15° 5,5 b b c b b c
RDMW2006M0T-A27 M 20 6,35 15° 6,5 b b c b b c
Positive round
Tole
ranc
e cl
ass
P M K N S H
HC HC HC HC HC HC
Designationd
mms
mm αd1
mm WK
P25
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
K25
WK
P25
WK
P25S
WK
P35S
WX
N15
WS
M35
WS
P45
WH
H15
α
d1
sd
RDMX0702M0T-A27 M 7 2,33 15° 2,8 b b c b b c
RDMX1003M0T-A27 M 10 3,15 15° 4,4 b b c b b c
RDMX12T3M0T-A27 M 12 3,92 15° 4,4 b b c b b c
RDMX1604M0T-A27 M 16 4,71 15° 5,5 b b c b b c
RDMX2006M0T-A27 M 20 5,95 15° 5,5 b b c b b c
HC = Coated carbideHW = Uncoated carbide
197Walter – Milling
ORDERING INFORMATION
Positive square
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K S H
HC HC HC HC HC HC
Designationl
mms
mm αr
mm WK
P25
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
K25
WK
P25
WK
P25S
WK
P35S
WS
M35
WS
P45
WH
H15
r
l s
αSPMT060304-D51 M 4 6,35 3,18 11° 0,4 a a b c b c b b c b c
SPMT09T308-D51 M 4 9,52 3,97 11° 0,8 a a b c b c b b c b c
SPMT120408-D51 M 4 12,7 4,76 11° 0,8 a a b c b c b b c b c
SPMT120606-D51 M 4 12,7 6,35 11° 0,6 b c b c c b c
SPMT120606-D57 M 4 12,7 6,35 11° 0,6 a a b c b c a b b c b c
SPMW060304T-A27 M 4 6,35 3,18 11° 0,4 b b c b b c
SPMW09T308T-A27 M 4 9,52 3,97 11° 0,8 b b c b b c
SPMW120408T-A27 M 4 12,7 4,76 11° 0,8 b b c b b c
SPMW120606T-A27 M 4 12,7 6,35 11° 0,6 c c
SPMW060304-A57 M 4 6,35 3,18 11° 0,4 b b c a b b c
SPMW09T308-A57 M 4 9,52 3,97 11° 0,8 b b c a b b c
SPMW120408-A57 M 4 12,7 4,76 11° 0,8 b b c a b b c
Positive square
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K S H
HC HC HC HC HC
Designationl
mms
mm αr
mmb
mm WK
P25
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
K25
WK
P25
WK
P25S
WK
P35S
WS
M35
WS
P45
WH
H15
αbr
r
l s
SDHW09T3AEN-A57 H 4 9,52 3,97 15° 0,3 1,2 b b c a b b c
SDMW09T3AETN-A27 M 4 9,52 3,97 15° 0,5 1,2 b b c b b c
SDMW09T3AEN-A57 M 4 9,52 3,97 15° 0,5 1,2 b c a b c
SPMT1204AEN M 4 12,7 4,76 11° 0,5 1,4 a a b c b c a b b c b c
SPMW1204AEN-A57 M 4 12,7 4,76 11° 0,5 1,4 b b a b b
SPMW1204AETN-A27 M 4 12,7 4,76 11° 0,5 1,4 b b b b
Positive square
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K S H
HC HC HC HC HC
Designationl
mms
mm αr
mmb
mm WK
P25
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
K25
WK
P25
WK
P25S
WK
P35S
WS
M35
WS
P45
WH
H15
αbr
r
l s
SPGT1204EDR-F55 G 4 12,7 4,76 11° 0,5 1,25 a a b c b c a b b c b c
HC = Coated carbideHW = Uncoated carbide
ORDERING INFORMATION
198 Walter – Milling
Form inserts, positive
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K S H
HC HC HC HC HC
Designationl1
mml
mms
mm αr
mm WK
P25
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
K25
WK
P25
WK
P25S
WK
P35S
WS
M35
WS
P45
WH
H15
α
l s
l1
rXDMT1303080R-F55 M 2 8,56 13,18 3,99 15° 8 a a b c b c b b c b c
XDMT16T3100R-F55 M 2 9 15,93 4,99 15° 10 a a b c b c b b c b c
XDMT2004125R-F55 M 2 11,26 19,94 6,24 15° 12,5 a a b c b c b b c b c
XDMT2405150R-F55 M 2 13,52 23,94 7,5 15° 15 a a b c b c b b c b c
XDMT2506160R-F55 M 2 14,43 25,54 8,03 15° 16 a a b c b c b b c b c
XDMT3207200R-F55 M 2 18,05 31,95 10 15° 20 a a b c b c b b c b c
XDMT4009250R-F55 M 2 22,57 39,95 12,5 15° 25 a a b c b c b b c b c
Form inserts, positive
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K S H
HC HC HC HC HC
Designationl1
mml
mms
mm αr
mm WK
P25
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
K25
WK
P25
WK
P25S
WK
P35S
WS
M35
WS
P45
WH
H15
α
l s
l1
rXDMT1303079R-F55 M 2 8,56 13,18 3,99 15° 7,84 a a b c b c b b c b c
XDMT16T3095R-F55 M 2 8,57 15,16 4,75 15° 9,525 a a b c b c b b c b c
XDMT2004127R-F55 M 2 11,44 20,26 6,33 15° 12,7 a a b c b c b b c b c
XDMT2506159R-F55 M 2 14,31 25,34 7,92 15° 15,88 a a b c b c b b c b c
XDMT3207191R-F55 M 2 17,19 30,42 9,51 15° 19,05 a a b c b c b b c b c
XDMT4009254R-F55 M 2 22,93 40,59 12,69 15° 25,4 a a b c b c b b c b c
HC = Coated carbideHW = Uncoated carbide
199Walter – Milling
ORDERING INFORMATION
Negative rhombic
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K S H
HC HC HC HC HC HC
Designationl2
mml
mms
mmr
mmb
mm WK
P25
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
K25
WK
P25
WK
P25S
WK
P35S
WS
M35
WS
P45
WH
H15
b
r
l
l2
s
LNGX130708R-L55 G 4 11 13,6 7,74 0,8 1,2 a a b c b c a b b b c b c
LNGX130712R-L55 G 4 11 13,6 7,63 1,2 1 a a b c b c b b c b c
LNGX130716R-L55 G 4 11 13,6 7,51 1,6 0,9 a a b c b c b b c b c
LNGX130720R-L55 G 4 11 13,6 7,41 2 0,7 a a b c b c b b c b c
LNGX130725R-L55 G 4 11 13,6 7,27 2,5 0,6 a a b c b c b b c b c
LNGX130730R-L55 G 4 11 13,6 7,12 3 0,7 a a b c b c b b c b c
Negative triangular
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K S H
HC HC HC HC HC HC HC
Designationd
mms
mmr
mm WK
P25
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
K25
WK
P25
WK
P25S
WK
P35S
WS
M35
WS
P45
WH
H15
d s
r P23696-1.0 M 6 9,52 5 1,2 a a b c b c b b c b c
P23696-2.0 M 6 13,5 7 1,6 a a b c b c b b c b c
Negative square
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K S H
HC HC HC HC HC HC HC
Designationl
mms
mmb
mm WK
P25
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
K25
WK
P25
WK
P25S
WK
P35S
WS
M35
WS
P45
WH
H15
b
sl
SNGX1205ANN-D27 G 8 9 6,4 1,5 b b c b b b c
SNGX1205ANN-F27 G 8 12,7 6,4 1,5 b b c b b c
SNGX1205ANN-F57 G 8 12,7 6,4 1,5 a a b c b c b b b c b c
SNGX1205ANN-F67 G 8 12,7 6,4 1,5 a a b c b c a b b c b c
SNGX1606ANN-D27 G 8 11 7,8 1,8 b b c b b b c
SNGX1606ANN-F27 G 8 16 7,8 1,8 b b c b b c
SNGX1606ANN-F57 G 8 16 7,7 1,8 a a b c b c b b b c b c
SNGX1606ANN-F67 G 8 16 7,7 1,8 a b c b c a b c b c
SNMX1205ANN-F27 M 8 12,7 6,4 1,5 b b c b b c
SNMX1205ANN-F57 M 8 12,7 6,4 1,5 a a b b b b c
SNMX1205ANN-F67 M 8 12,7 6,4 1,5 a a b a b b c
HC = Coated carbideHW = Uncoated carbide
ORDERING INFORMATION
200 Walter – Milling
Negative square
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K N S H
HC HC HC HC HC HC HC HC
Designationl
mms
mmb
mm WK
P25
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
K25
WK
P25
WK
P25S
WK
P35S
WX
N15
WS
M35
WS
P45
WH
H15
s
b
b
l
SNGX1205ENN-F27 G 8 12,7 6,4 1,2 b b c b b c
SNGX1205ENN-F57 G 8 12,7 6,4 1,2 a a b c b c b b b c b c
SNGX1205ENN-F67 G 8 12,7 6,4 1,2 a a b c b c a b b b b c
Negative square
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K N S H
HC HC HC HC HC HC HC HC
Designationl
mms
mmb
mm WK
P25
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
K25
WK
P25
WK
P25S
WK
P35S
WX
N15
WS
M35
WS
P45
WH
H15
b
b
sl
SNGX1205ZNN-F27 G 8 12,7 6,4 1,2 b b c b b c
SNGX1205ZNN-F57 G 8 12,7 6,4 1,2 a a b c b c b b b c b c
SNGX1205ZNN-F67 G 8 12,7 6,4 1,2 a a b c b c a b b c b c
Negative square
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K N S H
HC HC HC HC HC HC HC
Designationl
mms
mmr
mm WK
P25
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
K25
WK
P25
WK
P25S
WK
P35S
WX
N15
WS
M35
WS
P45
WH
H15
r
sl
SNGX120512-F57 G 8 12,7 6,4 1,2 a a b c b c b b c b c
SNMX120512-D27 M 8 12,7 6,4 1,2 b b c b b b c
SNMX120512-F27 M 8 12,7 6,4 1,2 b b c b b c
SNMX120512-F57 M 8 12,7 6,4 1,2 a a b c b c b b b c b c
SNMX120512-F67 M 8 12,7 6,4 1,2 a a b c b c a b b c b c
SNMX120520-D27 M 8 12,7 6,4 2 b b c b b b c
SNMX120520-F57 M 8 12,7 6,4 2 a a b c b c b b b c b c
SNMX160620-D27 M 8 16 7,8 2 b b c b b b c
SNMX160620-F27 M 8 16 7,8 2 b b c b b c
SNMX160620-F57 M 8 16 7,6 2 a a b c b c b b b c b c
SNMX160620-F67 M 8 16 7,9 2 a b c b c a b c b c
SNMX160640-D27 M 8 16 7,8 4 b b c b b b c
SNMX160640-F27 M 8 16 7,8 4 b b c b b c
SNMX160640-F57 M 8 16 7,7 4 a a b c b c b b b c b c
SNMX160640-F67 M 8 16 7,9 4 a b c b c a b c b c
HC = Coated carbideHW = Uncoated carbide
201Walter – Milling
ORDERING INFORMATION
Negative triangular
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K N S H
HC HC HC HC HC HC
Designationd
mms
mmb
mm WK
P25
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
K25
WK
P25
WK
P25S
WK
P35S
WX
N15
WS
M35
WS
P45
WH
H15
b
sd
TNEF1204AN-D57 E 6 12,7 4,76 1,8 a a b a b b b c
Negative heptagonal
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K N S H
HC HC HC HC HC HC
Designationd
mml
mms
mmr
mmb
mm WK
P25
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
K25
WK
P25
WK
P25S
WK
P35S
WX
N15
WS
M35
WS
P45
WH
H15
d
b
br
s
I XNHF070508-D27 H 14 14,5 7 5,8 0,8 – b b c b b b c
XNHF070508-D57 H 14 14,5 7 5,8 0,8 – a a b b b b c
XNHF070508-D67 H 14 14,5 7 5,8 0,8 – a a b a b b c
XNHF090612-D27 H 14 19,05 9 6,35 1,2 – b b c b b b c
XNHF090612-D57 H 14 19,05 9 6,35 1,2 – a a b b b b c
XNHF090612-D67 H 14 19,05 9 6,35 1,2 – a a b a b b c
XNHF0705ANN-D27 H 14 14,5 7 5,8 0,8 1,1 b b c b b b c
XNHF0705ANN-D57 H 14 14,5 7 5,8 0,8 1,1 a a b b b b c
XNHF0705ANN-D67 H 14 14,5 7 5,8 0,8 1,1 a a b a b b c
XNHF0906ANN-D27 H 14 19,05 9 6,35 0,8 1,4 b b c b b b c
XNHF0906ANN-D57 H 14 19,05 9 6,35 0,8 1,4 a a b b b b c
XNHF0906ANN-D67 H 14 19,05 9 6,35 0,8 1,4 a a b a b b c
HC = Coated carbideHW = Uncoated carbide
ORDERING INFORMATION
202 Walter – Milling
Tangential rhombic
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K N S H
HC HC HC HC HC HC
Designationl2
mml
mms
mmr
mmb
mm WK
P25
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
K25
WK
P25
WK
P25S
WK
P35S
WX
N15
WS
M35
WS
P45
WH
H15
r
s
l
l2
b LNKU2010DPTR-F27T K 4 15 20 10,5 0,6 1,2 b b b b
LNKU3010DPTR-F27T K 4 15 30 10,5 0,6 1,2 b b b b
LNKU2010DPR-F57T K 4 15 20 10,5 0,6 1,2 a a b b b c
LNKU3010DPR-F57T K 4 15 30 10,5 0,6 1,2 a a b b b c
Tangential rhombic
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K N S H
HC HC HC HC HC HC
Designationl2
mml
mms
mmr
mm WK
P25
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
K25
WK
P25
WK
P25S
WK
P35S
WX
N15
WS
M35
WS
P45
WH
H15
r
s
l
l2
LNMU150812T-F27T M 4 14 15 8 1,2 b b c b b c
LNMU201012T-F27T M 4 16 20 10 1,2 b b c b b c
LNMU150812-F57T M 4 14 15 8 1,2 a a b a b b c
LNMU201012-F57T M 4 16 20 10 1,2 a a b a b b c
Tangential rhombic
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K N S H
HC HC HC HC HC HC
Designationl2
mml
mms
mmr
mm WK
P25
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
K25
WK
P25
WK
P25S
WK
P35S
WX
N15
WS
M35
WS
P45
WH
H15
r
l s
l2
LNHU080304-B57T H 4 9 8 3,5 0,4 b c a b b c
LNHU080404-B57T H 4 9,4 8 4,5 0,4 b c a b b c
LNHU100508-B57T H 4 12,3 10 5,5 0,8 b c a b b c
LNHU120608-B57T H 4 13,9 12 6,5 0,8 b c a b b c
LNHU160812-B57T H 4 16 17,4 8 1,2 b c a b c
LNHU080304-F57T H 4 9 8 3,5 0,4 a a b c b c b b c b c
LNHU080404-F57T H 4 9,4 8 4,5 0,4 a a b c b c b b c b c
LNHU100508-F57T H 4 12,3 10 5,5 0,8 a a b c b c b b c b c
LNHU120608-F57T H 4 13,9 12 6,5 0,8 a a b c b c b b c b c
LNHU160812-F57T H 4 16 16,9 8 1,2 a a b c b c b b c b c
LNMU080304-B57T M 4 8 9 3,5 0,4 b c a b b c
LNMU080404-B57T M 4 9,4 8 4,5 0,4 b c a b b c
LNMU100508-B57T M 4 12,3 10 5,5 0,8 b c a b b c
LNMU120608-B57T M 4 13,9 12 6,5 0,8 b c a b b c
LNMU160812-B57T M 4 16 16,9 8 1,2 b c a b c
LNMU080304-F57T M 4 8 9 3,5 0,4 a a b c b c b b c b c
LNMU080404-F57T M 4 9,4 8 4,5 0,4 a a b c b c b b c b c
LNMU100508-F57T M 4 12,3 10 5,5 0,8 a a b c b c b b c b c
LNMU120608-F57T M 4 13,9 12 6,5 0,8 a a b c b c b b c b c
LNMU160812-F57T M 4 16 16,9 8 1,2 a a b c b c b b c b c
HC = Coated carbideHW = Uncoated carbide
203Walter – Milling
ORDERING INFORMATION
Tangential rhombic
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K N S H
HC HC HC HC HC HC
Designationl2
mml
mms
mmr
mm WK
P25
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
K25
WK
P25
WK
P25S
WK
P35S
WX
N15
WS
M35
WS
P45
WH
H15
r
s
l
l2
LNHX070204-D57T H 4 7 9 2,4 0,4 a b a b b c
LNHX070204-F57T H 4 7 9 2,4 0,4 a a b c b c b b c b c
LNMX070204-D57T M 4 7 9 2,4 0,4 a b a b b c
LNMX070204-F57T M 4 7 9 2,4 0,4 a a b c b c b b c b c
Tangential rhombic
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K N H
HC HC HC HC HC HC
Designationl2
mml
mms
mmr
mmb
mm WK
P25S
WK
P35S
WS
P45S
WS
M35
S
WS
P45S
WA
K15
WK
K25
WK
P25S
WK
P35S
WX
N15
WS
M35
S
WS
P45S
WH
H15
b
l
l2 s
r LNHU090404R-L55T H 4 9 8,5 4,5 0,4 1,5 a b c b c a b b c b c
LNHU090408R-L55T H 4 9 8,5 4,5 0,8 1,1 b c b c c b c
LNHU090412R-L55T H 4 9 8,5 4,5 1,2 0,8 b c b c c b c
LNHU090416R-L55T H 4 9 8,5 4,5 1,6 – b c b c c b c
LNHU090420R-L55T H 4 9 8,5 4,5 2 – b c b c c b c
LNHU130608R-L55T H 4 13 12 6,8 0,8 2,2 a b c b c a b b c b c
LNHU130612R-L55T H 4 13 12 6,8 1,2 1,85 b c b c c b c
LNHU130616R-L55T H 4 13 12 6,8 1,6 1,5 b c b c c b c
LNHU130620R-L55T H 4 13 12 6,8 2 1,15 b c b c c b c
LNHU130625R-L55T H 4 13 12 6,8 2,5 0,7 b c b c c b c
LNHU130630R-L55T H 4 13 12 6,8 3 – b c b c c b c
LNHU130632R-L55T H 4 13 12 6,8 3,2 – b c b c c b c
NEW2012
Negative square
Tole
ranc
e cl
ass
Num
ber
of
cutt
ing
edge
s
P M K N S H
HC HC HC HC HC HC
Designationl
mms
mmb
mm WK
P25
WK
P25S
WK
P35S
WS
P45
WS
M35
WS
P45
WA
K15
WK
K25
WK
P25
WK
P25S
WK
P35S
WX
N15
WS
M35
WS
P45
WH
H15
b
sl
SNHQ1205ZZR-A57T H 8 12 5 0,8 b b c a b b c
HC = Coated carbideHW = Uncoated carbide
ORDERING INFORMATION
204 Walter – Milling204204
Walter F2010 cutters (metric)
DesignationDc
mmDa
mmd1
mml4
mmLc
mm z kg
No. of indexable
insertsInsert type
F2010.B.080.Z06.02.750M 70,5 90,2 27 50 2 6 1,2 6
P23696-2.0
F2010.B.100.Z07.02.750M 90,1 109,9 32 50 2 7 1,7 7
F2010.B.125.Z08.02.750M 115,2 134,9 40 63 2 8 3,4 8
F2010.B.160.Z10.02.750M 150,4 170,2 40/40B 63 2 10 5,6 10
F2010.B.200.Z12.02.750M 190,6 210,2 60/50B 63 2 12 8,3 12
F2010.B.250.Z12.02.750M 240,6 260,2 60/50B 63 2 12 14,6 12
F2010.B.250.Z16.02.750M 240,6 260,2 60/50B 63 2 16 14,7 16
F2010.B.315.Z14.02.750M 305,6 325,260/50- 60BB
63 2 14 26,2 14
F2010.B.315.Z18.02.750M 305,6 325,260/50- 60BB
63 2 18 26,2 18
Walter F2010 cutters (inch)
DesignationDc
mmDa
mmd1
mml4
mmLc
mm z kg
No. of indexable
insertsInsert type
F2010.UB.076.Z06.02R750M 67,3 85,7 25,4 50 2 6 1,5 6
P23696-2.0
F2010.UB.102.Z07.02R750M 92,7 111,1 31,75 50 2 7 2,6 7
F2010.UB.127.Z08.02R750M 118,1 136,5 38,1 63 2 8 3,4 8
F2010.UB.152.Z10.02R750M 143,5 161,9 38,1 63 2 10 6,6 10
F2010.UB.203.Z12.02R750M 194,3 212,7 63,5 63 2 12 9,8 12
F2010.UB.254.Z12.02R750M 245,1 263,5 63,5 63 2 12 16,6 12
F2010.UB.254.Z16.02R750M 245,1 263,5 63,5 63 2 16 16,6 16
F2010.UB.305.Z18.02R750M 295,9 314,3 63,5 63 2 18 20,7 18
Lcl4
Dc d1Da
Lcl4
Dc d1Da
Lcl4
Dc d1Da
Lcl4
Dc d1Da
Assembly parts
Dc mm70,5-305,663,7-295,9
Cartridge for tool body FR750M
Clamping screw for insert Tightening torque
FS1031 (Torx 20) 5,0 Nm
Clamping screw for cartridge Tightening torque
FS247 (SW 4) 8,0 Nm
Adjusting pin FS303 (Torx 20)
Accessories
Dc mm70,5-305,663,7-295,9
Screwdriver for indexable insert FS228 (Torx 20)
Screwdriver for adjusting pin FS228 (Torx 20)
ISO 2936 Allen key for cartridge ISO2936-4 (SW 4)
205Walter – Milling
ORDERING INFORMATION
Walter Xtra·tec® heptagon cutter F4045 (metric)
DesignationDc
mmd1/ISO
mml4
mm Lcmm z kg
No. of indexable
insertsInsert type
l4
Dc d1
Lc
l4
Dc d1
Lc
F4045.B27.063.Z06.04 63 27 50 4 6 0,7 6
XNHF0705..F4045.B27.063.Z09.04 63 27 50 4 9 0,7 9
F4045.B27.080.Z08.04 80 27 50 4 8 1,1 8
F4045.B27.080.Z11.04 80 27 50 4 11 1,1 11
F4045.B27.080.Z06.06 80 27 50 6 6 1,2 6XNHF0906..
F4045.B27.080.Z09.06 80 27 50 6 9 1,4 9
F4045.B32.100.Z10.04 100 32 50 4 10 1,8 10XNHF0705..
F4045.B32.100.Z14.04 100 32 50 4 14 1,8 14
F4045.B32.100.Z08.06 100 32 50 6 8 1,8 8XNHF0906..
F4045.B32.100.Z12.06 100 32 50 6 12 1,9 12
F4045.B40.125.Z12.04 125 40 63 4 12 3,3 12XNHF0705..
F4045.B40.125.Z18.04 125 40 63 4 18 3,2 18
F4045.B40.125.Z10.06 125 40 63 6 10 3,1 10XNHF0906..
F4045.B40.125.Z16.06 125 40 63 6 16 3,5 16
F4045.B40.160.Z16.04 160 40/40B 63 4 16 5,5 16XNHF0705..
F4045.B40.160.Z22.04 160 40/40B 63 4 22 5,7 22
F4045.B40.160.Z12.06 160 40/40B 63 6 12 6,1 12XNHF0906..
F4045.B40.160.Z20.06 160 40/40B 63 6 20 6,1 20
F4045.B60.200.Z20.04 200 60/50B 63 4 20 9,3 20XNHF0705..
F4045.B60.200.Z28.04 200 6050/B 63 4 28 9,5 28
F4045.B60.200.Z16.06 200 60/50B 63 6 16 9,4 16XNHF0906..
F4045.B60.200.Z26.06 200 60/50B 63 6 26 9,9 26
Assembly parts
Dc mm 63-200
Clamping wedge FK374
Clamping screw for clamping wedge Tightening torque
FS2134 (Torx 15IP) 6,0 Nm
Accessories
Dc mm 63-200
T-handle torque wrench FS2041
Interchangeable blade for clamping wedge FS2047 (Torx 15IP)
Screwdriver FS1485 (Torx 15IP)
ORDERING INFORMATION
206 Walter – Milling
Walter PCD cutters F4050 κ = 90° (metric)
DesignationDc
mmd1/ISO
mml4
mmLc
mm z kgNo.
cartridgesCartridge type
Type ofadjusting key
Dc d1
l4
Dc
l4
d1
Dc 160 - 200
Dc 80 - 125
F4050.B27.080.Z06.R733* 80 27 73 4 6 0,6 6
FR733WCD10
FK376
F4050.B32.100.Z12.R733* 100 32 63 4 12 0,7 12
F4050.B40.125.Z18.R733* 125 40 63 4 18 2,9 18
F4050.B40.160.Z24.R733 160 ISO 40/40B 63 4 24 3,7 24
F4050.B40.200.Z28.R733 200 ISO 40/40B 63 4 28 5,4 28
Tools are pre-balanced to G 6.3 for n = 10,000 rpm * Centre bolt must have through coolant facilityBodies and assembly parts are included in the scope of delivery.
Walter PCD cutter basic body (metric)
DesignationDc
mmd1/ISO
mml4
mm z kg
F4050.B27.080.Z06.R001* 80 27 73 6 0,6
F4050.B32.100.Z12.R001* 100 32 63 12 0,7
F4050.B40.125.Z18.R001* 125 40 63 18 2,9
F4050.B40.160.Z24.R001 160 ISO 40/40B 63 24 3,7
F4050.B40.200.Z28.R001 200 ISO 40/40B 63 28 5,4
* Centre bolt must have through coolant facilityBodies and assembly parts are included in the scope of delivery. Cartridges are not included.
Walter PCD cutter F4050 κ = 75° (metric)
DesignationDc
mmd1/ISO
mml4
mmLc
mm z kgNo.
cartridgesCartridge type
Type ofadjusting key
Dc d1
l4
Dc
l4
d1
Dc 159.4 - 199.4
Dc 79.4 - 124.4
F4050.B27.080.Z06.R734* 79,4 27 73 1,1 6 0,6 6
FR734 WCD10 FK376
F4050.B32.100.Z12.R734* 99,4 32 63 1,1 12 0,7 12
F4050.B40.125.Z18.R734* 124,4 40 63 1,1 18 2,9 18
F4050.B40.160.Z24.R734 159,4 ISO 40/40B 63 1,1 24 3,7 24
F4050.B40.200.Z28.R734 199,4 ISO 40/40B 63 1,1 28 5,4 28
Available as an accessory: wide finishing cartridge FR735 WCD10Tools are pre-balanced to G 6.3 for n = 10,000 rpm * Centre bolt must have through coolant facilityBodies and assembly parts are included in the scope of delivery.
Dc d1
l4
Dc
l4
d1
Dc 160 - 200
Dc 80 - 125
207Walter – Milling
ORDERING INFORMATION
Accessories
Designation Accessories
Dc 80 100 125 160–200
Wrench for mill tightening screw FS438 FS439 FS440 —
Sealing disc set — FS2140 COMPLETE SET
Gasket — O-R 96x4
Finishing cartridge only for κ = 75° FR735 WCD10
Screwdriver for compound screw FS1485 (Torx 15IP)
Screwdriver for balancing screw FS229 (Torx 15)
Screwdriver for chip deflector FS230 (Torx 8)
T-handle torque wrench FS2041
Interchangeable blade FS2051 (SW 4)
Screwdriver for chip deflector FS2001
Interchangeable blade FS2007 (Torx 8)
Assembly parts
Designation Assembly parts
Dc 80 100 125 160–200
Mill tightening screw with internal cooling
FS2160 FS2161 FS2162 —
Cartridge κ = 75° FR734 WCD10
Cartridge κ = 90° FR733 WCD10
Adjusting key FK376
Compound screw FS746 (Torx 15IP)
Spring washer FS2171
Chip deflector FR749
Clamping screw for chip deflector FS379 (Torx 8)
Tightening torque 1,0 Nm
Clamping screw for cartridge FS2170 (SW 4)
Tightening torque 9,0 Nm
Balancing screw FS2169 (Torx 15)
ORDERING INFORMATION
208 Walter – Milling208208
DesignationDc
mmd1
mml4
mmLc
mml1
mm z
No. of indexable
inserts Type
NCT ScrewFit
d1
l4
Lc
Dc
F5041.T22.025.Z03.08 25 T22 35 8,4 – 3 0,11 3
LN . . 0904 . .F5041.T22.025.Z04.08 25 T22 35 8,4 – 4 0,11 4
F5041.T28.032.Z04.08 32 T28 35 8,4 – 4 0,21 4
F5041.T28.032.Z05.08 32 T28 35 8,4 – 5 0,21 5
Shank DIN 1835-B
Dc d1
Lcl4
l1
F5041.W25.025.Z03.08 25 25 43 8,4 100 3 0,33 3
LN . . 0904 . .
F5041.W25.025.Z04.08 25 25 43 8,4 100 4 0,32 4
F5041.W32.032.Z04.08 32 32 49 8,4 110 4 0,6 4
F5041.W32.032.Z05.08 32 32 49 8,4 110 5 0,6 5
F5041.W32.040.Z04.08 40 32 49 8,4 110 4 0,67 4
F5041.W32.040.Z06.08 40 32 49 8,4 110 6 0,67 6
Parallel shank without flat
l1
Dc d1
Lcl4
F5041.Z25.025.Z03.08 25 25 38 8,4 200 3 0,7 3
LN . . 0904 . .F5041.Z25.025.Z04.08 25 25 38 8,4 200 4 0,7 4
F5041.Z32.032.Z04.08 32 32 39 8,4 250 4 1,47 4
F5041.Z32.032.Z05.08 32 32 39 8,4 250 5 1,47 5
Cyl. hole transverse key way DIN 138
Dc
l4Lc
d1
F5041.B16.040.Z04.08 40 16 40 8,4 – 4 0,2 4
LN . . 0904 . .
F5041.B16.040.Z06.08 40 16 40 8,4 – 6 0,25 6
F5041.B22.050.Z05.08 50 22 40 8,4 – 5 0,36 5
F5041.B22.050.Z07.08 50 22 40 8,4 – 7 0,37 7
F5041.B22.063.Z07.08 63 22 40 8,4 – 7 0,62 7
F5041.B22.063.Z10.08 63 22 40 8,4 – 10 0,63 10
Bodies and assembly parts are included in the scope of delivery.
BlaxxTMWalter shoulder mill F5041/LNHU 0904 . . (metric)
Assembly parts
Accessories
Dc mm 25-63
Clamping screw Tightening torque
FS1457 (Torx 9 IP) 2,0 Nm
Dc mm 25-63
Torque screwdriver FS2003
Interchangeable blade FS2013 (Torx 9IP)
Screwdriver FS 1484 (Torx 9IP)
NEW2012
209Walter – Milling
ORDERING INFORMATION
BlaxxTMWalter shoulder mill F5041/LNHU 0904 . . (inch)
Assembly parts
Dc mm 25,4-63,5
Clamping screw Tightening torque
FS1457 (Torx 9 IP) 2,0 Nm
DesignationDc
mmDc
inchesd1
mml4
mml1
mmLc
mm z
No. of indexable
inserts
Shank DIN 1835-B
Dc d1
Lcl4
l1
F5041.UW26.026.Z03.08 25,4 1“ 25,4 43,6 101,6 8,4 3 0,34 3
LN . . 0904 . .F5041.UW31.031.Z04.08 31,75 1 1/4“ 31,75 43,6 101,6 8,4 4 0,54 4
F5041.UW38.038.Z04.08 38,1 1 1/2“ 38,1 46,0 114,3 8,4 4 0,91 4
Parallel shank without flat
l1
Dc d1
Lcl4
F5041.UZ26.026.Z03.08 25,4 1“ 25,4 50 203,2 8,4 3 0,73 3LN . . 0904 . .
F5041.UZ31.031.Z04.08 31,75 1 1/4“ 31,75 50 254,0 8,4 4 1,45 4
Cyl. hole transverse key way DIN 138
Dc
l4Lc
d1
F5041.UB13.038.Z04.08 38,1 1 1/2“ 12,7 40 – 8,4 4 0,21 4
LN . . 0904 . .F5041.UB19.051.Z05.08 50,8 2“ 19,05 40 – 8,4 5 0,40 5
F5041.UB26.064.Z07.08 63,5 2 1/2“ 25,4 50 – 8,4 7 0,64 7
Bodies and assembly parts are included in the scope of delivery.
NEW2012
Accessories
Dc mm 25,4-63,5
Torque screwdriver FS2003
Interchangeable blade FS2013 (Torx 9IP)
Screwdriver FS 1484 (Torx 9IP)
ORDERING INFORMATION
210 Walter – Milling210210
BlaxxTMWalter shoulder mill F5141/LNHU 1306 . . (metric)
Assembly parts
Dc mm 40-125
Clamping screw Tightening torque
FS2081 (Torx 15 IP) 3,0 Nm
DesignationDc
mmd1
mml4
mmLc
mml1
mm z
No. of indexable
inserts Type
NCT ScrewFit
d1
l4
Lc
Dc
F5141.T36.040.Z05.12 40 T36 40 12,2 – 5 0,35 5LN . . 1306 . .
F5141.T45.050.Z06.12 50 T45 40 12,2 – 6 0,5 6
Shank DIN 1835-B
Dc d1
Lcl4
l1
F5141.W32.040.Z03.12 40 32 49 12,2 110 3 0,65 3LN . . 1306 . .
F5141.W32.040.Z05.12 40 32 49 12,2 110 5 0,65 5
Parallel shank without flat
l1
Dc d1
Lcl4
F5141.Z32.040.Z03.12 40 32 44 12,2 250 3 1,5 3
LN . . 1306 . .
F5141.Z32.040.Z05.12 40 32 44 12,2 250 5 1,5 5
Cyl. hole transverse key way DIN 138
Dc
l4Lc
d1
F5141.B16.040.Z04.12 40 16 40 12,2 – 4 0,2 4
LN . . 1306 . .
F5141.B16.040.Z05.12 40 16 40 12,2 – 5 0,2 5
F5141.B22.050.Z05.12 50 22 40 12,2 – 5 0,32 5
F5141.B22.050.Z06.12 50 22 40 12,2 – 6 0,33 6
F5141.B22.063.Z06.12 63 22 40 12,2 – 6 0,57 6
F5141.B22.063.Z08.12 63 22 40 12,2 – 8 0,57 8
F5141.B27.080.Z07.12 80 27 50 12,2 – 7 1,07 7
F5141.B27.080.Z10.12 80 27 50 12,2 – 10 1,09 10
F5141.B32.100.Z09.12 100 32 50 12,2 – 9 1,80 9
F5141.B32.100.Z13.12 100 32 50 12,2 – 13 1,81 13
F5141.B40.125.Z11.12 125 40 63 12,2 – 11 3,38 11
F5141.B40.125.Z16.12 125 40 63 12,2 – 16 3,45 16
Bodies and assembly parts are included in the scope of delivery.
NEW2012
Accessories
Dc mm 40-125
Torque screwdriver FS2003
Interchangeable blade FS2014 (Torx 15IP)
Screwdriver FS 1487 (Torx 15IP)
211Walter – Milling
ORDERING INFORMATION
BlaxxTMWalter shoulder mill F5141/LNHU 1306 . . (inch)
Assembly parts
Dc mm 38,1-127
Clamping screw Tightening torque
FS2081 (Torx 15 IP) 3,0 Nm
DesignationDc
mmDc
inchesd1
mml4
mml1
mmLc
mm z
No. of indexable
inserts Type
NCT ScrewFit
d1
l4
Lc
Dc
F5141.UT36.038.Z04.12 38,1 1 1/2“ T36 35 – 12,2 4 0 LN . . 1306 . .
F5141.UT45.051.Z05.12 50,8 2“ T45 40 – 12,2 5 0 LN . . 1306 . .
Shank DIN 1835-B
Dc d1
Lcl4
l1
F5141.UW38.038.Z04.12 38,1 1 1/2“ 38,1 46 114,3 12,2 4 0 LN . . 1306 . .
Parallel shank without flat
l1
Dc d1
Lcl4
F5141.UZ38.038.Z04.12 38,1 1 1/2“ 38,1 50 254 12,2 4 0 LN . . 1306 . .
Cyl. hole transverse key way DIN 138
Dc
l4Lc
d1
F5141.UB13.038.Z04.12 38,1 1 1/2“ 12,7 40 – 12,2 4 0 LN . . 1306 . .
F5141.UB19.051.Z05.12 50,8 2“ 19,05 40 – 12,2 5 0 LN . . 1306 . .
F5141.UB26.064.Z06.12 63,5 2 1/2“ 19,05 40 – 12,2 6 0 LN . . 1306 . .
F5141.UB26.076.Z07.12 76,2 3“ 25,4 50 – 12,2 7 0 LN . . 1306 . .
F5141.UB31.102.Z09.12 101,6 4“ 31,75 50 – 10 9 0 LN . . 1306 . .
F5141.UB38.127.Z11.12 127 5“ 38,1 50 – 12,2 11 0 LN . . 1306 . .
Bodies and assembly parts are included in the scope of delivery.
NEW2012
Accessories
Dc mm 38,1-127
Torque screwdriver FS2003
Interchangeable blade FS2014 (Torx 15IP)
Screwdriver FS 1487 (Torx 15IP)
ORDERING INFORMATION
212 Walter – Milling
Profile mill F4031 (inch)
DesignationDc
mm
Dcinches/
no.d1
mml4
mml1
mm z
No. of indexable
inserts Type
Parallel shank without flat
l4l1
Dc d1
F4031.UZ13.012.Z02.20 12,7 1/2“ 12,7 32 130 2 0,12 1P8001-D12R . . P8001-UD4R . .
F4031.UZ15.016.Z02.25 15,875 5/8“ 15,875 40 140 2 0,2 1P8001-D16R . . P8001-UD5R . .
F4031.UZ19.020.Z02.32 19,05 3/4“ 19,05 50 160 2 0,33 1P8001-D20R . . P8001-UD6R . .
F4031.UZ26.025.Z02.40 25,4 1“ 25,4 63 160 2 0,57 1P8001-D25R . . P8001-UD8R . .
F4031.UZ31.032.Z02.50 31,75 1 1/4“ 31,75 80 180 2 0,97 1P8001-D32R . .
P8001-UD10R . .
Bodies and assembly parts are included in the scope of delivery.
Assembly parts
Dc mm 12,7 15,875 19 25,4 31,75
Clamping screw for insert Tightening torque
FS2072 (Torx 20 IP)
5,0 Nm
FS2073 (Torx 20 IP)
5,0 Nm
FS2074 (Torx 20 IP)
5,0 Nm
FS2075 (Torx 20 IP)
5,0 Nm
FS2107 (Torx 30 IP)
6,0 Nm
Accessories
Dc mm 12,7-25,4 15,875-19 31,75
Torque screwdriver FS2003 FS2003
Interchangeable blade FS2015 (Torx 20IP)
FS2015 (Torx 20IP)
FS2109 (Torx 30IP)
Screwdriver FS1486 (Torx 20IP) FS1486 (Torx 20IP) FS2108 (Torx 30IP)
T-handle torque wrench FS2041
NEW2012
213Walter – Milling
CUTTING DATA
214 Walter – Milling
Starting values for cutting speed vc [m/min]
Mat
eria
l gro
up
= Cutting data for wet machining
= Dry machining is possible
Brin
ell h
ardn
ess
HB
Tens
ile s
tren
gth
R mN
/mm
2
Mac
hini
ng g
roup
1
Roughing Roughing
Structure of main material groups and identification letters
Face/shoulder mill Face/shoulder mill
HC HC
WKP35S WKP25S WSP45S WSM35S
ae / Dc* ae / Dc* ae / Dc* ae / Dc*
1/11/2 1/5 1/1
1/2 1/5 1/11/2 1/5 1/1
1/2 1/5
P
Non-alloyed steel
C ≤ 0.25% annealed 125 428 P1 C C C 250 300 290 320 230 290C > 0.25... ≤ 0.55% annealed 190 639 P2 C C C 220 260 260 330 190 250
C > 0.25... ≤ 0.55% heat treated 210 708 P3 C C C 215 250 255 320 180 230
C > 0.55% annealed 190 639 P4 C C C 220 260 260 330 190 250
C > 0.55% heat treated 300 1013 P5 C C C 160 180 220 260 130 145Machining steel (short-chipping) annealed 220 745 P6 C C C 210 240 250 315 175 225
Low-alloyed steel
annealed 175 591 P7 C C C 220 270 260 320 190 240heat treated 300 1013 P8 C C C 170 190 210 250 130 145
heat treated 380 1282 P9 C C C 130 150 170 190 100 110heat treated 430 1477 P10 C C C 110 130 150 170 80 90
High-alloyed steel and high-alloyed tool steelannealed 200 675 P11 C C C 130 160 140 170 115 140hardened and tempered 300 1013 P12 C C C 80 90 110 130 75 90hardened and tempered 400 1361 P13 C C C 70 80 90 110 65 80
Stainless steelferritic/martensitic, annealed 200 675 P14 C C C 140 160 115 140 120 150martensitic, heat treated 330 1114 P15 C C C 90 110 80 100 80 110
M Stainless steelaustenitic, quench hardened 200 675 M1 C C C 110 130 130 155austenitic, precipitation hardened (PH) 300 1013 M2 C C C 90 100 100 150austenitic/ferritic, duplex 230 778 M3 C C C 100 120 120 140
K
Malleable cast ironferritic 200 675 K1 C C C 160 190 180 210pearlitic 260 867 K2 C C C 140 170 160 190
Grey cast ironlow tensile strength 180 602 K3 C C C 300 330 320 350high tensile strength/austenitic 245 825 K4 C C C 190 220 180 210
Cast iron with spheroidal graphiteferritic 155 518 K5 C C C 200 220 220 240pearlitic 265 885 K6 C C C 130 150 140 170
GGV (CGI) 200 675 K7 C C C 130 160 150 180
N
Aluminium wrought alloysnot precipitation hardenable 30 – N1 C C
precipitation hardenable, precipitation hardened 100 343 N2 C C
Cast aluminium alloys≤ 12% Si, not precipitation hardenable 75 260 N3 C C
≤ 12% Si, precipitation hardenable, precipitation hardened 90 314 N4 C C
> 12% Si, not precipitation hardenable 130 447 N5 C C
Magnesium alloys 70 250 N6 C C
Copper and copper alloys (bronze/brass)
non-alloyed, electrolytic copper 100 343 N7 C C
brass, bronze, red brass 90 314 N8 C C
Cu-alloys, short-chipping 110 382 N9 C C
high-strength, Ampco 300 1013 N10 C C
S
Heat-resistant alloys
Fe-basedannealed 200 675 S1 C C 65 70 80 90precipitation hardened 280 943 S2 C C 45 50 60 65
Ni or Co baseannealed 250 839 S3 C C 50 55 60 70
precipitation hardened 350 1177 S4 C C 30 35 40 45cast 320 1076 S5 C C 40 45 50 55
Titanium alloyspure titanium 200 675 S6 C C 65 70 80 90+α and β alloys, precipitation hardened 375 1262 S7 C C 30 35 40 45β alloys 410 1396 S8 C C 30 35 30 45
Tungsten alloys 300 1013 S9 C C 70 80 70 80
Molybdenum alloys 300 1013 S10 C C 70 80 70 80
HHardened steel
hardened and tempered 50 HRC – H1 C C
hardened and tempered 55 HRC – H2 C C
hardened and tempered 60 HRC – H3 C C
Hardened cast iron hardened and tempered 55 HRC – H4 C C
O
Thermoplasts without abrasive fillers O1 C C C 400 400 400 400 400 400Thermosetting plastics without abrasive fillers O2 C C C 300 300 300 300 300 300
Plastic, glass-fibre reinforced GFRP O3
Plastic, carbon-fibre reinforced CFRP O4
Plastic, aramid fibre reinforced AFRP O5Graphite (technical) 80 Shore O6 C C 400 500
C C Recommended application (the specified cutting data are regarded as starting values for the recommended application).C Possible application, reduce cutting data by 30–50% (increase for ISO M approx. 70–80%).
HC = Coated carbide
1 The classification of the machining groups can be found in the General catalogue from page ¤H 8¤ onwards. / 2 Cutting data can also be used without coolant. / * ae/Dc = 1/10, vc = 10% higher than 1/5.
215Walter – Milling
Starting values for cutting speed vc [m/min]
Mat
eria
l gro
up
= Cutting data for wet machining
= Dry machining is possible
Brin
ell h
ardn
ess
HB
Tens
ile s
tren
gth
R mN
/mm
2
Mac
hini
ng g
roup
1
Roughing Roughing
Structure of main material groups and identification letters
Face/shoulder mill Face/shoulder mill
HC HC
WKP35S WKP25S WSP45S WSM35S
ae / Dc* ae / Dc* ae / Dc* ae / Dc*
1/11/2 1/5 1/1
1/2 1/5 1/11/2 1/5 1/1
1/2 1/5
P
Non-alloyed steel
C ≤ 0.25% annealed 125 428 P1 C C C 250 300 290 320 230 290C > 0.25... ≤ 0.55% annealed 190 639 P2 C C C 220 260 260 330 190 250
C > 0.25... ≤ 0.55% heat treated 210 708 P3 C C C 215 250 255 320 180 230
C > 0.55% annealed 190 639 P4 C C C 220 260 260 330 190 250
C > 0.55% heat treated 300 1013 P5 C C C 160 180 220 260 130 145Machining steel (short-chipping) annealed 220 745 P6 C C C 210 240 250 315 175 225
Low-alloyed steel
annealed 175 591 P7 C C C 220 270 260 320 190 240heat treated 300 1013 P8 C C C 170 190 210 250 130 145
heat treated 380 1282 P9 C C C 130 150 170 190 100 110heat treated 430 1477 P10 C C C 110 130 150 170 80 90
High-alloyed steel and high-alloyed tool steelannealed 200 675 P11 C C C 130 160 140 170 115 140hardened and tempered 300 1013 P12 C C C 80 90 110 130 75 90hardened and tempered 400 1361 P13 C C C 70 80 90 110 65 80
Stainless steelferritic/martensitic, annealed 200 675 P14 C C C 140 160 115 140 120 150martensitic, heat treated 330 1114 P15 C C C 90 110 80 100 80 110
M Stainless steelaustenitic, quench hardened 200 675 M1 C C C 110 130 130 155austenitic, precipitation hardened (PH) 300 1013 M2 C C C 90 100 100 150austenitic/ferritic, duplex 230 778 M3 C C C 100 120 120 140
K
Malleable cast ironferritic 200 675 K1 C C C 160 190 180 210pearlitic 260 867 K2 C C C 140 170 160 190
Grey cast ironlow tensile strength 180 602 K3 C C C 300 330 320 350high tensile strength/austenitic 245 825 K4 C C C 190 220 180 210
Cast iron with spheroidal graphiteferritic 155 518 K5 C C C 200 220 220 240pearlitic 265 885 K6 C C C 130 150 140 170
GGV (CGI) 200 675 K7 C C C 130 160 150 180
N
Aluminium wrought alloysnot precipitation hardenable 30 – N1 C C
precipitation hardenable, precipitation hardened 100 343 N2 C C
Cast aluminium alloys≤ 12% Si, not precipitation hardenable 75 260 N3 C C
≤ 12% Si, precipitation hardenable, precipitation hardened 90 314 N4 C C
> 12% Si, not precipitation hardenable 130 447 N5 C C
Magnesium alloys 70 250 N6 C C
Copper and copper alloys (bronze/brass)
non-alloyed, electrolytic copper 100 343 N7 C C
brass, bronze, red brass 90 314 N8 C C
Cu-alloys, short-chipping 110 382 N9 C C
high-strength, Ampco 300 1013 N10 C C
S
Heat-resistant alloys
Fe-basedannealed 200 675 S1 C C 65 70 80 90precipitation hardened 280 943 S2 C C 45 50 60 65
Ni or Co baseannealed 250 839 S3 C C 50 55 60 70
precipitation hardened 350 1177 S4 C C 30 35 40 45cast 320 1076 S5 C C 40 45 50 55
Titanium alloyspure titanium 200 675 S6 C C 65 70 80 90+α and β alloys, precipitation hardened 375 1262 S7 C C 30 35 40 45β alloys 410 1396 S8 C C 30 35 30 45
Tungsten alloys 300 1013 S9 C C 70 80 70 80
Molybdenum alloys 300 1013 S10 C C 70 80 70 80
HHardened steel
hardened and tempered 50 HRC – H1 C C
hardened and tempered 55 HRC – H2 C C
hardened and tempered 60 HRC – H3 C C
Hardened cast iron hardened and tempered 55 HRC – H4 C C
O
Thermoplasts without abrasive fillers O1 C C C 400 400 400 400 400 400Thermosetting plastics without abrasive fillers O2 C C C 300 300 300 300 300 300
Plastic, glass-fibre reinforced GFRP O3
Plastic, carbon-fibre reinforced CFRP O4
Plastic, aramid fibre reinforced AFRP O5Graphite (technical) 80 Shore O6 C C 400 500
C C Recommended application (the specified cutting data are regarded as starting values for the recommended application).C Possible application, reduce cutting data by 30–50% (increase for ISO M approx. 70–80%).
HC = Coated carbide
1 The classification of the machining groups can be found in the General catalogue from page ¤H 8¤ onwards. / 2 Cutting data can also be used without coolant. / * ae/Dc = 1/10, vc = 10% higher than 1/5.
Feed rates
Mat
eria
l gro
up
Milling cutter type F5041 F5141
Lead angle κ 90° 90°
Tool Ø25–63 mm
1–2 1/2"40–125 mm
11/2 –5"
Max. depth of cut apmax [mm] 8 12
P
Non-alloyed steel 0,18 0,24
Low-alloyed steel 0,12 0,18
High-alloyed steel and high-alloyed tool steel 0,12 0,18
Stainless steel 0,10 0,14
M Stainless steel 0,10 0,12
K
Malleable cast iron 0,14 0,24
Grey cast iron 0,18 0,30
Cast iron with spheroidal graphite 0,14 0,24
GGV (CGI) 0,12 0,18
N
Aluminium wrought alloys
Cast aluminium alloys
Magnesium alloys
Copper and copper alloys (bronze/brass)
S
Heat-resistant alloys 0,10 0,14
Titanium alloys 0,10 0,14
Tungsten alloys 0,10 0,14
Molybdenum alloys 0,10 0,14
HHardened steel
Hardened cast iron
O
Thermoplasts
Plastic, carbon-fibre reinforced
Graphite (technical) 0,12 0,18
Correction factor KaeFor the feed per tooth depending on the ratiocut width ae to mill diameter Dc
fz = fz0 · Kae
ae/Dc = 1/1 – 1/2 1,0 1,0
1/5 1,1 1,1
1/10 1,2 1,2
1/20 1,3 1,3
TURNING Walter ¤3 ISOturning ¤4¤
Grooving ¤14¤
Orderinginformation ¤20¤
DRILLINGANDTHREADING WalterTitex ¤39¤
Solidcarbidedrills ¤40¤
PCDdrills ¤56¤
Orderinginformation ¤58¤
Walter ¤91¤
Drills ¤92¤
Counterboredrills ¤96¤
Precisionboring ¤97¤
Orderinginformation ¤98¤
WalterPrototyp ¤103¤
HSS-E-PMtaps ¤104¤
HSS-Etaps ¤106¤
Solidcarbidethreadformers ¤110¤
Solidcarbidethreadmills ¤112¤
Orderinginformation ¤114¤
MILLING WalterPrototyp ¤155¤
Solidcarbideendmills ¤156¤
Ball-noseendmills ¤162 Orderinginformation ¤166¤
Walter ¤177¤
Thenewgenerationofcutters ¤179¤
Cuttingtoolmaterials ¤182¤
Facemills ¤186¤
Copymills ¤190¤
Orderinginformation ¤192¤
Walteradaptors ¤217¤
Adaptors ¤218¤
Orderinginformation ¤220¤
Alphanumericindex ¤228¤
_TOOlInnOvATIOnS–ADAPTOrS
Precisionfromthespindletothecuttingedge.
ProductinnovationsEdition2012-2
Adaptors
218
Orderinginformationcanbefoundfrompage¤221¤onwards.
ADAPTOrS
Walter steeptaperadaptors–precisionfromthespindletothecuttingedge.
THEADAPTORS
Precisionstartswiththeadaptor.Forthisreason,allsteeptaperadaptorsintheWalteradaptorrangearedesignedwithmaximumtaperaccuracyandexactingtolerances.Itgoeswithoutsayingthattheyalsohaveahighconcentricityandclampingprecision.
Alladaptorshave– minimumbalanceclassofG6.3at16,000rpm– coolantdesignformAD+B
FACEMILLADAPTORAK155
Foraccommodatingcutterswithboreanddriveslot.DIn1880(centrebolttype)andDIn2079(4threadedmountingholes,from40mmdiameter)available.CoolantoutletsontheendfaceformillswithinternalcoolingsimilartoDIn6357.
– Taperversion:SK40,SK50,BT40,BT50– Adaptordiameter:16-32mm
219Walter–Adaptors
WELDONCHUCKAK170
ForclampingtoolswithaparallelshankandsidefixingflataccordingtoDIn1835-BandDIn6535-HB
– Taperversion:SK40,SK50,BT40,BT50– Adaptordiameter:6-40mm
ERCOLLETCHUCKAK300
ForclampingtoolswithaparallelshankincolletsinaccordancewithDIn6499
– Taperversion:SK40,SK50,BT40,BT50– Forcollets:Er16-Er40– 2versions:Forinternalcoolantsupply,standard– 2versionswithdifferentlengths
FACEMILLADAPTORA155
Foraccommodatingcutterswithboreanddriveslot.DIn1880(centrebolttype)andDIn2079(4threadedmountingholes,from40mmdiameter)available.
– Taperversion:SK40,SK50,BT40,BT50– Adaptordiameter:16-40mm– 2versionswithdifferentlengths
ORDERING INFORMATION
220 Walter – Adaptors
Face mill adaptor DIN 69871 A 155.S
Designationd1
mmd11mm
d12mm
l4mm
l19mm
SK DIN 69871 AD+B
d12
l19
l4
d11
A155.S40.035.16 SK40 16 40 35 17 0,94
A155.S40.035.22 SK40 22 48 35 19 1,05
A155.S40.035.27 SK40 27 48 35 21 1,2
A155.S40.050.32 SK40 32 78 50 24 1,75
A155.S40.100.16 SK40 16 40 100 17 1,94
A155.S40.100.22 SK40 22 48 100 19 1,95
A155.S40.100.27 SK40 27 60 100 21 2,5
A155.S40.100.32 SK40 32 78 100 24 3,55
A155.S50.035.22 SK50 22 48 35 19 2,85
A155.S50.035.27 SK50 27 60 35 21 3,1
A155.S50.035.32 SK50 32 78 35 24 3,35
A155.S50.050.40* SK50 40 89 50 27 4,1
A155.S50.070.60* SK50 60 127 70 40 7,2
A155.S50.100.22 SK50 22 48 100 19 4,55
A155.S50.100.27 SK50 27 60 100 21 5,3
A155.S50.100.32 SK50 32 78 100 24 6,55
A155.S50.100.40* SK50 40 89 100 27 9,5
Bodies and assembly parts are included in the scope of delivery. For pull studs for steep tapers, see General catalogue, page H 42.* with 4 additional threaded holes for tools with DIN 2079 tooling connection.
NEW2012
Designationd1
mmd11mm
d12mm
l4mm
l19mm
JIS B 6339
d11d12
l19 l4
A155.BT40.035.16 SK40 16 40 35 17 1,14
A155.BT40.035.22 SK40 22 48 35 19 1,15
A155.BT40.035.27 SK40 27 48 35 21 1,3
A155.BT40.065.32 SK40 32 78 65 24 2
A155.BT40.100.16 SK40 16 40 100 17 1,8
A155.BT40.100.22 SK40 22 48 100 19 2
A155.BT40.100.27 SK40 27 60 100 21 2,5
A155.BT50.055.22 SK50 22 48 55 19 3,65
A155.BT50.055.27 SK50 27 60 55 21 3,9
A155.BT50.055.32 SK50 32 78 55 24 4,15
A155.BT50.055.40* SK50 40 89 55 27 4,9
A155.BT50.080.60* SK50 60 127 80 40 3,75
A155.BT50.100.22 SK50 22 48 100 19 4,5
A155.BT50.100.27 SK50 27 60 100 21 5,75
A155.BT50.100.32 SK50 32 78 100 24 6,5
Bodies and assembly parts are included in the scope of delivery. For pull studs for steep tapers, see General catalogue, page H 42.* with 4 additional threaded holes for tools with DIN 2079 tooling connection.
Face mill adaptor JIS B 6339 A 155.BT
Assembly parts
Accessories
NEW2012
d11 mm 16 22 27 32 40 60
Mill tightening screw DIN 6367 FS430 FS431 FS432 FS433 FS434 FS912
d11 mm 16 22 27 32 40 60
Wrench for mill tightening screw FS436 FS437 FS438 FS439 FS440 FS913
221Walter – Adaptors
ORDERING INFORMATION
Assembly parts
Accessories
Designationd1
mmd11mm
d12mm
l4mm
l19mm
SK DIN 69871 AD+B
l19
d11d12
l4
AK155.S40.035.16 SK40 16 40 35 17 0,94
AK155.S40.035.22 SK40 22 48 35 19 1,05
AK155.S40.035.27 SK40 27 48 35 21 1,2
AK155.S40.050.32 SK40 32 78 50 24 1,75
AK155.S50.035.16 SK50 16 40 35 17 2,7
AK155.S50.035.22 SK50 22 48 35 19 2,85
AK155.S50.035.27 SK50 27 60 35 21 3,1
AK155.S50.050.32 SK50 32 78 50 24 3,35
Bodies and assembly parts are included in the scope of delivery.For pull studs for steep tapers, see General catalogue, page H 42.
Face mill adaptor DIN 69871 AK 155.S
Face mill adaptor JIS B 6339 AK 155.BT
d11 mm 16 22 27 32
Tightening screw ISO 4762 FS938 (SW 6) FS939 (SW 8) FS940 (SW 10) FS941 (SW 14)
d11 mm 16 22 27 27-32
ISO 2936 Allen key ISO 2936-6 (SW 6) ISO 2936-8 (SW 8) ISO 2936-10 (SW 10) ISO 2936-14 (SW 14)
Designationd1
mmd11mm
d12mm
l4mm
l19mm
JIS B 6339
l4l19
d11d12
AK155.BT40.035.16 SK40 16 40 35 17 1,14
AK155.BT40.035.22 SK40 22 48 35 19 1,15
AK155.BT40.035.27 SK40 27 48 35 21 1,3
AK155.BT40.065.32 SK40 32 78 65 24 2
AK155.BT50.055.16 SK50 16 40 55 17 3,5
AK155.BT50.055.22 SK50 22 48 55 19 3,65
AK155.BT50.055.27 SK50 27 60 55 21 3,9
AK155.BT50.055.32 SK50 32 78 55 24 4,15
Bodies and assembly parts are included in the scope of delivery.For pull studs for steep tapers, see General catalogue, page H 42.
NEW2012
NEW2012
ORDERING INFORMATION
222 Walter – Adaptors
d11 mm 6 8 10 12-14 16-18 20 25 32-40
Clamping screw DIN 1835-B M06x10 M08x10 M10x12 M12x16 M14x16 M16x16 M18x2x20 M20x2x20
Designationd1
mmd11mm
d12mm
l4mm
l16mm
SK DIN 69871 AD+B
l4
d11d12
l16
AK170.S40.050.06 SK40 6 25 50 35 0,9
AK170.S40.050.08 SK40 8 28 50 35 0,9
AK170.S40.050.10 SK40 10 35 50 39 1
AK170.S40.050.12 SK40 12 42 50 44 1
AK170.S40.050.14 SK40 14 42 50 44 1
AK170.S40.063.16 SK40 16 48 63 47 1
AK170.S40.063.18 SK40 18 48 63 47 1,2
AK170.S40.063.20 SK40 20 52 63 49 1,3
AK170.S40.100.25 SK40 25 65 100 59 2,3
AK170.S40.100.32 SK40 32 72 100 63 2,5
AK170.S50.063.06 SK50 6 25 63 35 2,8
AK170.S50.063.08 SK50 8 28 63 35 2,7
AK170.S50.063.10 SK50 10 35 63 39 2,9
AK170.S50.063.12 SK50 12 42 63 44 3
AK170.S50.063.14 SK50 14 42 63 44 3
AK170.S50.063.16 SK50 16 48 63 47 3,1
AK170.S50.063.18 SK50 18 48 63 47 3
AK170.S50.063.20 SK50 20 52 63 49 3,1
AK170.S50.080.25 SK50 25 65 80 59 3,8
AK170.S50.100.32 SK50 32 72 100 63 4,5
AK170.S50.100.40 SK50 40 78 100 73 4,7
Bodies and assembly parts are included in the scope of delivery. For pull studs for steep tapers, see General catalogue, page H 42.
Designationd1
mmd11mm
d12mm
l4mm
l16mm
JIS B 6339
l4
d11d12
l16
AK170.BT40.050.06 SK40 6 25 50 35 0,9
AK170.BT40.050.08 SK40 8 28 50 35 1
AK170.BT40.063.10 SK40 10 35 63 39 1,1
AK170.BT40.063.12 SK40 12 42 63 44 1,2
AK170.BT40.063.14 SK40 14 44 63 44 1,2
AK170.BT40.063.16 SK40 16 48 63 47 1,2
AK170.BT40.063.18 SK40 18 50 63 47 1,3
AK170.BT40.063.20 SK40 20 52 63 49 1,4
AK170.BT40.090.25 SK40 25 65 90 59 2,4
AK170.BT40.100.32 SK40 32 72 100 63 2,6
AK170.BT50.063.06 SK50 6 25 63 35 3,6
AK170.BT50.063.08 SK50 8 28 63 35 3,5
AK170.BT50.070.10 SK50 10 35 70 39 3,7
AK170.BT50.080.12 SK50 12 42 80 44 3,8
AK170.BT50.080.16 SK50 16 48 80 47 3,9
AK170.BT50.080.20 SK50 20 52 80 49 3,9
AK170.BT50.100.25 SK50 25 65 100 59 4,6
AK170.BT50.105.32 SK50 32 72 105 63 5,3
AK170.BT50.115.40 SK50 40 78 115 75 5,5
Bodies and assembly parts are included in the scope of delivery. For pull studs for steep tapers, see General catalogue, page H 42.
Weldon adaptor DIN 69871 AK 170.S
Weldon adaptor JIS B 6339 AK 170.MAS BT
Assembly parts
NEW2012
NEW2012
223Walter – Adaptors
ORDERING INFORMATION
ER collet chuck with internal cooling AK 300.S
Collets ER 16 ER 20 ER 25 ER 32 ER 40
Clamping nut for internal coolant supply FS1448 FS1359 FS1449 FS1360 FS1450
Designationd1
mmd11mm
d12mm
l4mm Collets
SK DIN 69871 AD+B
d11
d12
l4
AK300.S40.075.ER16 SK40 1-10 28 75 ER 16 1
AK300.S40.075.ER20 SK40 1-13 34 75 ER 20 1,1
AK300.S40.075.ER25 SK40 1-16 42 75 ER 25 1,3
AK300.S40.075.ER32 SK40 1-20 50 75 ER 32 1,4
AK300.S40.075.ER40 SK40 2-26 63 75 ER 40 1,6
AK300.S40.105.ER16 SK40 1-10 28 105 ER 16 1,1
AK300.S40.105.ER20 SK40 1-13 34 105 ER 20 1,3
AK300.S40.105.ER25 SK40 1-16 42 105 ER 25 1,7
AK300.S40.105.ER32 SK40 1-20 50 105 ER 32 1,8
AK300.S40.105.ER40 SK40 2-26 63 105 ER 40 2
AK300.S50.075.ER20 SK50 1-13 34 75 ER 20 2,9
AK300.S50.075.ER25 SK50 1-16 42 75 ER 25 3,2
AK300.S50.075.ER32 SK50 1-20 50 75 ER 32 3,3
AK300.S50.075.ER40 SK50 2-26 63 75 ER 40 3,3
AK300.S50.105.ER20 SK50 1-13 34 105 ER 20 3,1
AK300.S50.105.ER25 SK50 1-16 42 105 ER 25 3,4
AK300.S50.105.ER32 SK50 1-20 50 105 ER 32 3,7
AK300.S50.105.ER40 SK50 2-26 63 105 ER 40 4,1
Bodies and assembly parts are included in the scope of delivery. If the collet chuck is used for the internal coolant supply, the sealing discs on page G 102 of the General catalogue should be used. N.B.: The clamping nut can be damaged if the chuck is used without a sealing disc. For collets, see General catalogue, page G 99. For pull studs for steep tapers, see General catalogue, page H 42.
Designationd1
mmd11mm
d12mm
l4mm Collets
JIS B 6339
d11
d12
l4
AK300.BT40.075.ER16 SK40 1-10 28 75 ER 16 1,1
AK300.BT40.075.ER20 SK40 1-13 34 75 ER 20 1,2
AK300.BT40.075.ER25 SK40 1-16 42 75 ER 25 1,4
AK300.BT40.075.ER32 SK40 1-20 50 75 ER 32 1,5
AK300.BT40.075.ER40 SK40 2-26 63 75 ER 40 1,6
AK300.BT40.105.ER16 SK40 1-10 28 105 ER 16 1,3
AK300.BT40.105.ER20 SK40 1-13 34 105 ER 20 1,5
AK300.BT40.105.ER25 SK40 1-16 42 105 ER 25 1,7
AK300.BT40.105.ER32 SK40 1-20 50 105 ER 32 1,8
AK300.BT40.105.ER40 SK40 2-26 63 105 ER 40 1,9
AK300.BT50.075.ER20 SK50 1-13 34 75 ER 20 3,7
AK300.BT50.075.ER25 SK50 1-16 42 75 ER 25 4
AK300.BT50.075.ER32 SK50 1-20 50 75 ER 32 4
AK300.BT50.075.ER40 SK50 2-26 63 75 ER 40 4,2
AK300.BT50.105.ER20 SK50 1-13 34 105 ER 20 4,1
AK300.BT50.105.ER25 SK50 1-16 42 105 ER 25 4,3
AK300.BT50.105.ER32 SK50 1-20 50 105 ER 32 4,5
AK300.BT50.105.ER40 SK50 2-26 63 105 ER 40 4,9
Bodies and assembly parts are included in the scope of delivery. If the collet chuck is used for the internal coolant supply, the sealing discs on page G 102 of the General catalogue should be used. N.B.: The clamping nut can be damaged if the chuck is used without a sealing disc. For collets, see General catalogue, page G 99. For pull studs for steep tapers, see General catalogue, page H 42.
Assembly parts
ER collet chuck with internal cooling AK 300.MAS BT
NEW2012
NEW2012
ORDERING INFORMATION
224 Walter – Adaptors224224
Collets ER 16 ER 20 ER 25 ER 32 ER 40
Clamping nut FS1537 FS2183 FS1540 FS1541 FS1542
Designationd1
mmd11mm
d12mm
l4mm Collets
SK DIN 69871 AD+B
d11
d12
l4
AK300.S40.070.ER16 SK40 1-10 28 70 ER 16 1
AK300.S40.070.ER20 SK40 1-13 34 70 ER 20 1,1
AK300.S40.070.ER25 SK40 1-16 42 70 ER 25 1,2
AK300.S40.070.ER32 SK40 1-20 50 70 ER 32 1,4
AK300.S40.070.ER40 SK40 2-26 63 70 ER 40 1,5
AK300.S40.100.ER16 SK40 1-10 28 100 ER 16 1,1
AK300.S40.100.ER20 SK40 1-13 34 100 ER 20 1,3
AK300.S40.100.ER25 SK40 1-16 42 100 ER 25 1,5
AK300.S40.100.ER32 SK40 1-20 50 100 ER 32 1,8
AK300.S40.100.ER40 SK40 2-26 63 100 ER 40 1,9
AK300.S50.070.ER20 SK50 1-13 34 70 ER 20 2,9
AK300.S50.070.ER25 SK50 1-16 42 70 ER 25 3,2
AK300.S50.070.ER32 SK50 1-20 50 70 ER 32 3,1
AK300.S50.070.ER40 SK50 2-26 63 70 ER 40 3,5
AK300.S50.100.ER20 SK50 1-13 34 100 ER 20 3,1
AK300.S50.100.ER25 SK50 1-16 42 100 ER 25 3,6
AK300.S50.100.ER32 SK50 1-20 50 100 ER 32 3,8
AK300.S50.100.ER40 SK50 2-26 63 100 ER 40 4,1
Bodies and assembly parts are included in the scope of delivery. For collets, see General catalogue, page G 99. For pull studs for steep tapers, see General catalogue, page H 42.
Designationd1
mmd11mm
d12mm
l4mm Collets
JIS B 6339
d11
d12
l4
AK300.BT40.070.ER16 SK40 1-10 28 70 ER 16 1,1
AK300.BT40.070.ER20 SK40 1-13 34 70 ER 20 1,1
AK300.BT40.070.ER25 SK40 1-16 42 70 ER 25 1,3
AK300.BT40.070.ER32 SK40 1-20 50 70 ER 32 1,4
AK300.BT40.070.ER40 SK40 2-26 63 70 ER 40 1,6
AK300.BT40.100.ER16 SK40 1-10 28 100 ER 16 1,3
AK300.BT40.100.ER20 SK40 1-13 34 100 ER 20 1,5
AK300.BT40.100.ER25 SK40 1-16 42 100 ER 25 1,7
AK300.BT40.100.ER32 SK40 1-20 50 100 ER 32 1,8
AK300.BT40.100.ER40 SK40 2-26 63 100 ER 40 1,9
AK300.BT50.070.ER20 SK50 1-13 34 70 ER 20 3,7
AK300.BT50.070.ER25 SK50 1-16 42 70 ER 25 4
AK300.BT50.070.ER32 SK50 1-20 50 70 ER 32 4
AK300.BT50.070.ER40 SK50 2-26 63 70 ER 40 4,2
AK300.BT50.100.ER20 SK50 1-13 34 100 ER 20 4,1
AK300.BT50.100.ER25 SK50 1-16 42 100 ER 25 4,3
AK300.BT50.100.ER32 SK50 1-20 50 100 ER 32 4,5
AK300.BT50.100.ER40 SK50 2-26 63 100 ER 40 4,9
Bodies and assembly parts are included in the scope of delivery. For collets, see General catalogue, page G 99. For pull studs for steep tapers, see General catalogue, page H 42.
ER collet chuck DIN 69871 AK 300.S
ER collet chuck JIS B 6339 AK 300.MAS BT
Assembly parts
NEW2012
NEW2012
225Walter – Adaptors
ORDERING INFORMATION
Designationd1
mmd11mm
l16mm
l4mm
l1mm Version
Shank DIN 1835 ASteel shank with solid carbide core and internal coolant supply
D
E
87°
F
d1d11
d11
d11
l1
l1
l1
d1
d1
l4l16
l4l16
l4l16
AK512.Z16.T14.070 16 T14 38 70 120 E 0,2
AK512.Z16.T14.120 16 T14 37 120 170 E 0,3
AK512.Z20.T18.123 20 T18 45 123 175 D 0,5
AK512.Z25.T22.122 25 T22 55 122 180 D 0,8
AK512.Z25.T28.127 25 T28 60 127 185 F 0,9
AK512.Z32.T28.283 32 T28 60 283 345 D 2,6
Note: When used in shrink-fit chucks, a shrink-fit device with a power of min. 10 kW is required.
Designationd1
mmd11mm
l16mm
l4mm
l1mm Version
Shank DIN 1835 ASteel shank with solid carbide core and internal coolant supply
D
E
87°
F
d1d11
d11
d11
l1
l1
l1
d1
d1
l4l16
l4l16
l4l16
AK512.UZ19.T18.070 0.75 T18 45 2.756 4.724 D 0,3
AK512.UZ19.T18.123 0.75 T18 45 4.843 6.890 D 0,4
AK512.UZ26.T22.122 1.00 T22 55 4.803 7.078 D 0,9
AK512.UZ26.T22.282 1.00 T22 55 11.102 13.386 D 1,7
AK512.UZ31.T28.283 1.25 T28 60 11.142 13.583 D 2,6
Note: When used in shrink-fit chucks, a shrink-fit device with a power of min. 10 kW is required.
Adaptor DIN 1835 A AK 512 (metric) - screwfit
Adaptor DIN 1835 A AK 512 (inch) - screwfit
NEW2012
NEW2012
ORDERING INFORMATIONORDERING INFORMATION
226 Walter – Adaptors
Master VDI DIN 69880 AK 135VDI 50 + 60
Designationd1
mmd14mm
d11mm
l4mm kg
d1d11d14
l4
AK135M.5.50.060.N8 50 98 NCT80 60 3,7
AK135M.5.60.060.N8 60 123 NCT80 60 5,5
Modular NCT adaptor
Adaptor AK 540 - screwfitSK 40
Designationd1
mmd11mm
d14mm
l4mm
l16mm
l18mm kg
SK DIN 69871 AD+B AK540.S40.T18.040CO SK40 T18 20 40 16 10 0,82
AK540.S40.T22.040CO SK40 T22 25 40 16 10 0,83
For NCT ScrewFit front piece
NEW2012
NEW2012
d14 d11
90°
l18
87°
l16
l4
Designationd1
mmd11mm
l4mm
l18mm Version
Form A
d11 d1
l18l4
Form B
d1d11
l4
AK523.T14.10.E12 T14 E12 25 10 A 0,05
AK523.T14.25.E16 T14 E16 25 – B 0,06
AK523.T18.30.E20 T18 E20 30 – B 0,11
AK523.T22.35.E25 T22 E25 35 – B 0,20
ScrewFit/ConeFitTM adaptor AK 523
NEW2012
227Walter – Adaptors
ORDERING INFORMATION
Adaptor AK 540BT 40 - screwfit
Designationd1
mmd11mm
d14mm
l4mm
l16mm
l18mm kg
MAS-BT JIS B 6339 AK540.BT40.T22.050CO SK40 T22 25 50 17 10 1,01
For NCT ScrewFit front piece
NEW2012
d14 d11
90°
l18
87°
l16
l4
Adaptor AK 610/DIN 6335 HA - conefit
Designation
d1h6
mmd11mm
l4mm
l1mm
Shank DIN 6335 HA with internal coolant supply
l4l1
d1d11
AK610.Z12.E10.005 12 E10 5 65 0,1
AK610.Z16.E16.025 16 E16 25 110 0,2
- For ConeFitTM mill heads
Adaptor AK 610/DIN 6335 HA - conefit
Designation
d1h6
mmd11mm
l4mm
l1mm
Shank DIN 6335 HA with internal coolant supply
l4l1
d1d11
AK610.Z20.E20.110C 20 E20 110 180 0,7
- For ConeFitTM mill heads- With solid carbide shank
NEW2012
NEW2012
ALPHANUMERIC INDEX
228
AA-PCLN ..................... ¤31¤
A-PDUN .................... ¤31¤
A-PSKN..................... ¤31¤
A-PTFN .....................¤32¤
A-PWLN ....................¤32¤
A155 ....................... ¤220¤
A3279XPL .................¤63¤
A3299XPL ................ ¤77¤
A3379XPL ................. ¤70¤
A3389AML ...............¤84¤
A3393TTP .................¤60¤
A3879XPL ................. ¤67¤
A3899XPL.................¤80¤
A3979XPL ................. ¤73¤
A6489AMP ...............¤84¤
A6589AMP ...............¤85¤
AEP2251302 .......... ¤119¤
AEP2251312 .......... ¤119¤
AEP2256302 .......... ¤119¤
AEP2256312 ..........¤120¤
AEP2351302 ..........¤120¤
AEP2351312...........¤120¤
AEP2356302 ..........¤120¤
AEP2356312 ..........¤120¤
AK135 ..................... ¤226¤
AK155 ..................... ¤221¤
AK170 ..................... ¤222¤
AK300 .................... ¤224¤
AK300 .................... ¤223¤
AK512 ..................... ¤225¤
AK523 .................... ¤226¤
AK540 .................... ¤227¤
AK540 .................... ¤226¤
AK610 ..................... ¤227¤
ADGT .......................¤192¤
ADKT .......................¤192¤
ADMT ............. ¤192¤, ¤193¤
BB4013 ........................¤98¤
B4015 ........................¤98¤
B4017 ........................¤98¤
MM20213 ...................¤142¤
M2021305 ..............¤124¤
M2021306 ..............¤142¤
M20233 ..................¤142¤
M2023306 ..............¤142¤
M20263 ..................¤142¤
M2026305 ..............¤142¤
M2026306 ..............¤142¤
M203009 ................¤145¤
M205049 ................¤149¤
M20513 ...................¤146¤
M2051305 ..............¤146¤
M2051306 ..............¤146¤
M2051332 .............. ¤147¤
M20533 ..................¤146¤
M2053306 ..............¤146¤
M205549 ................¤150¤
M20563 ..................¤146¤
M2056305 ..............¤146¤
M2056306 ..............¤146¤
M2056332 .............. ¤147¤
M2121305 ..............¤143¤
M21263 ...................¤143¤
M2126305 ..............¤143¤
M2128305 ..............¤143¤
M21513 ................... ¤147¤
M2151305 .............. ¤147¤
M21563 ................... ¤147¤
M2156305 .............. ¤147¤
M2158305 ..............¤148¤
M22213 ...................¤143¤
M2221305 ..............¤143¤
M22263 ..................¤144¤
M2226305 ..............¤144¤
M22513 ...................¤148¤
M2251305 ..............¤148¤
M22563 ..................¤148¤
M2256305 ..............¤148¤
M225632 ................¤149¤
M23213 ...................¤144¤
M2321305 ..............¤144¤
M23263 ..................¤144¤
M2326305 ..............¤144¤
M233009 ................¤145¤
M235049 ................¤150¤
CCCGT ......................... ¤24¤
CCMT .........................¤99¤
CNGN ........................ ¤25¤
CNMG ....................... ¤20¤
CNMM ...................... ¤20¤
CRDC .........................¤33¤
CRDN .........................¤33¤
CRSN .........................¤33¤
DDCLN ........................ ¤29¤
DNGN ....................... ¤25¤
DNMG ........................ ¤21¤
DNMM ....................... ¤21¤
DSDN ........................ ¤29¤
DSSN ........................ ¤29¤
DWLN ....................... ¤29¤
EEG ..............................¤98¤
EP2051302 ............. ¤114¤
EP2051305 ............. ¤114¤
EP2051312 ............. ¤115¤
EP2051342 ............. ¤115¤
EP2051362 ............. ¤116¤
EP2051382 ............. ¤115¤
EP2053302 ............ ¤114¤
EP2053305 ............ ¤114¤
EP2056302 ............ ¤114¤
EP2056305 ............ ¤114¤
EP2056312 ............. ¤115¤
EP2056342 ............ ¤115¤
EP2056362 ............ ¤116¤
EP2056382 ............ ¤116¤
EP2058302 ............ ¤114¤
EP2058305 ............ ¤114¤
EP2156302 ............. ¤116¤
EP2156312 ............. ¤117¤
EP2156362 ............. ¤117¤
EP2251302 ............. ¤117¤
EP2251312 ............. ¤118¤
EP2256302 ............ ¤117¤
EP2256312 ............. ¤118¤
EP2351302 ............. ¤118¤
EP2351312 ............. ¤118¤
EP2356302 ............ ¤118¤
EP2356312 ............. ¤119¤
EP2456302 ............ ¤119¤
FF2010 ..................... ¤204¤
F2162 ........................¤86¤
F2171 .........................¤86¤
F4031 ..................... ¤212¤
F4045 ..................... ¤205¤
F4050 ..................... ¤206¤
F5041 ..................... ¤208¤
F5141 .......................¤210¤
GGX ............................. ¤26¤
HH1E0111 ..................¤169¤
H1E01118 ................¤169¤
H1E01219 ................¤169¤
H1E12018 ................¤168¤
H1E58018 ............... ¤170¤
H1E58118 ................ ¤170¤
H1E58318 ............... ¤170¤
H1E58518 ............... ¤170¤
H1E92718 ............... ¤167¤
H2034217 ...............¤166¤
H2038217 ...............¤166¤
H2134217................¤166¤
H2138217 ................¤166¤
H3E20419 ...............¤168¤
H4033217 ............... ¤173¤
H4034217 ............... ¤173¤
H4036217 ............... ¤173¤
H4038217 ............... ¤174¤
H4046988 ............... ¤171¤
H4133217 ................ ¤173¤
H4134217 ................ ¤173¤
H4138217 ................ ¤174¤
H4E34217 ............... ¤167¤
H4E38217 ............... ¤167¤
H4E38217 ...............¤168¤
H5087016 .............. ¤152¤
H5088016 .............. ¤152¤
H8004788 ............... ¤172¤
HP8061106 ............. ¤151¤
HP8061716 ............. ¤151¤
HP8061816 ............. ¤151¤
HP8166716 ............. ¤151¤
KK600 ..........................¤32¤
K1161XPL ..................¤85¤
K3281TFT ................ ¤59¤
K3299XPL ................¤58¤
K3879XPL ................¤58¤
K3899XPL ................¤58¤
LLNGX .......................¤199¤
LNHU ............. ¤199¤, ¤203¤
LNHX ...................... ¤203¤
LNKU ...................... ¤202¤
LNMU ......................¤199¤
LNMX ..................... ¤203¤
LPGW ......................¤193¤
LPMT .......................¤193¤
LPMW .....................¤193¤
Designation Page Designation Page Designation Page Designation Page Designation Page
229
ALPHANUMERIC INDEX
WWCMT........................¤99¤
WNMG ...................... ¤24¤
WNMM ..................... ¤24¤
XXDMT .......................¤198¤
XNHF .......................¤201¤
PTGN .........................¤30¤
PTFN .......................... ¤31¤
RRCGX ........................ ¤25¤
RDHW ......................¤196¤
RDMT ......................¤196¤
RDMW .....................¤196¤
RDMX ......................¤196¤
RNGN........................ ¤25¤
ROHX .......................¤196¤
RPGX ........................ ¤25¤
SSCMT ..................¤24¤, ¤99¤
SCGT ......................... ¤24¤
SDHW ...................... ¤197¤
SDMW ..................... ¤197¤
SNGN........................ ¤25¤
SNGX ............. ¤199¤, ¤200¤
SNHQ ...................... ¤203¤
SNMG ....................... ¤22¤
SNMM ...................... ¤22¤
SNMX ............ ¤199¤, ¤200¤
SPGT........................ ¤197¤
SPMT ....................... ¤197¤
SPMW ..................... ¤197¤
TTNEF ........................¤201¤
TNMG ........................¤23¤
TNMM .......................¤23¤
VVNMG ........................¤23¤
M23513 ...................¤148¤
M2351305 ..............¤148¤
M23563 ..................¤149¤
M2356305 ..............¤149¤
M24263 ..................¤144¤
M2426305 ..............¤144¤
M24563 ..................¤149¤
M2456305 ..............¤149¤
MPHW .....................¤194¤
MPHX ......................¤194¤
OODHW......................¤194¤
ODMT ......................¤194¤
ODMW .....................¤194¤
OPHN .......................¤194¤
PP20200 ................... ¤133¤
P20210 .................... ¤131¤
P2021005 ............... ¤131¤
P202103 .................¤134¤
P202108 ................. ¤133¤
P20230 ...................¤132¤
P2023005 ...............¤132¤
P202603 .................¤135¤
P202608 ................. ¤133¤
P203009 .................¤140¤
P20310 .................... ¤131¤
P2031005 ............... ¤131¤
P2031006 ............... ¤131¤
P203103 ..................¤134¤
P2031035 ...............¤134¤
P20330....................¤132¤
P2033005 ...............¤132¤
P20340 ................... ¤133¤
P2034005 ............... ¤133¤
P203509 ................. ¤141¤
P20360 ................... ¤131¤
P2036005 ............... ¤131¤
P2036006 ............... ¤131¤
P2236005 ...............¤138¤
P22509 ................... ¤127¤
P225099 .................¤129¤
P22519 ....................¤126¤
P22559 ................... ¤127¤
P22569 ...................¤126¤
P23210 ....................¤139¤
P2321005 ...............¤139¤
P233009 ................. ¤141¤
P233509 ................. ¤141¤
P23360....................¤139¤
P2336005 ...............¤139¤
P233602 .................¤139¤
P235099 .................¤130¤
P23519 .................... ¤127¤
P2351905 ............... ¤127¤
P235599 .................¤130¤
P23569 ................... ¤127¤
P2356905 ............... ¤127¤
P235692 .................¤128¤
P23696 ...................¤199¤
P24360 ...................¤140¤
P2436005 ...............¤140¤
P24569 ...................¤128¤
P2456905 ...............¤128¤
P26315 ....................¤195¤
P26325 ...................¤195¤
P26335 ...................¤195¤
P26337 ....................¤195¤
P26339....................¤195¤
P265676 .................¤128¤
P28210 ....................¤140¤
P28360 ...................¤140¤
P28519 ....................¤128¤
P28569 ...................¤129¤
P40310 ....................¤134¤
P40360....................¤134¤
P40519 ....................¤124¤
P40569 ...................¤124¤
P4840 ............. ¤100¤, ¤101¤
P4841 ............. ¤100¤, ¤101¤
P8001 ......................¤195¤
PCLN .........................¤30¤
PSSN .........................¤30¤
PSDN .........................¤30¤
P203603 .................¤134¤
P2036035 ...............¤134¤
P20380 ...................¤132¤
P20390 ................... ¤133¤
P2039005 ............... ¤133¤
P20509 ...................¤123¤
P205099 .................¤129¤
P205183 .................¤124¤
P2051832 ...............¤124¤
P20519 .................... ¤121¤
P2051905 ............... ¤121¤
P2051935 ...............¤123¤
P205198 .................¤123¤
P20539 .................. ¤122¤
P2053905 .............. ¤122¤
P20549 .................. ¤122¤
P2054905 .............. ¤122¤
P205599 .................¤129¤
P205683 .................¤124¤
P2056832 ...............¤124¤
P20569 ................... ¤121¤
P2056905 ............... ¤121¤
P2056935 ...............¤124¤
P205698 .................¤123¤
P20589 .................. ¤122¤
P2058905 .............. ¤122¤
P20599 .................. ¤122¤
P2059905 .............. ¤122¤
P21210 ....................¤135¤
P212608 ................. ¤137¤
P21360 ....................¤136¤
P2136005 ...............¤136¤
P21380 .................... ¤137¤
P2138005 ............... ¤137¤
P21519 ................... ¤125¤
P215599 .................¤129¤
P21569 ................... ¤125¤
P2156905 .............. ¤125¤
P21589 ....................¤126¤
P2158905 ...............¤126¤
P22210 ....................¤138¤
P223009 ................. ¤141¤
P22310 ....................¤138¤
P2231005 ...............¤138¤
P22360 ...................¤138¤
Designation Page Designation Page Designation PageDesignation Page Designation Page
Howtofindus._ WALTER WORLDWIDE
WalterHungáriaKft.Budapest, Hungary
WalterAustriaGmbHVienna, Austria
SCMontanwerkeWalterSRLTimisoara, Romania
MontanwerkeWalterGmbH-PodružnicaTrgovinaSlovenijaMiklavž na Dravskem Polju, Slovenia
WalterLLCSt. Petersburg, Russia
WalterSlowakei,o.z.Nitra, Slovakia
WalterKesiciTakimlarSanayiveTicaretLimitedSirketiIstanbul, Turkey
EUROPE
WalterDeutschlandGmbHFrankfurt, Germany
Walter(Schweiz)AGSolothurn, Switzerland
WalterBeneluxN.V./S.A.Zaventem, Belgium
WalterGBLtd.Bromsgrove, Great Britain
WalterItaliaS.R.L.Cadorago (CO), Italy
WalterFranceSoultz-sous-Forêts, France
WalterToolsIbericaS.A.U.El Prat de Llobregat, Spain
WalterNordenABHalmstad, Sweden
WalterCZspol.sr.o.Kurim, Czech Republic
WalterPolskaSp.zo.o.Warszawa, Poland
HEADQUARTERS
WalterAGTübingen, Germany
www.walter-tools.com
ASIA PACIFIC REGION
WalterWuxiCo.Ltd.Wuxi, China
WalterAGSingaporePte.Ltd.Singapore
WalterKoreaLtd.Korea
WalterToolsIndiaPvt.Ltd.Pune, India
WalterToolingJapanKKNagoya, Japan
Walter(Thailand)Co.Ltd.Bangkok, Thailand
WalterMalaysiaSdn.Bhd.Selangor, Malaysia
WalterAustraliaPty.Ltd.Victoria, Australia
NORTH AMERICA
WalterUSA,INC.Waukesha, WI, USA
WalterToolsS.A.deC.V.Saltillo Coahuila, Mexico
WalterCanadaMississauga, Canada
SOUTH AMERICA
WalterdoBrasilLtda.Sorocaba, Brazil
WalterArgentinaS.A.Buenos Aires, Argentina
COMPLEXITYMADEEASY.
www.walter-tools.com
WalterMultiply is the new competence brand from Walter, which combines all measures involved in in-creasing productivity with a multi-stage service pro-gramme. As a result, even highly complex processes can suddenly seem quite easy to deal with. WalterMultiply means multiplying the factors which lead to success. Because of the integrated efficiency of our multi-stage services, production performance can be increased by a significantly higher factor than would ever be possible using the total sum of all indi-vidual measures. Addition in process chains belongs in the past. The future is now WalterMultiply.
Complexitymadeeasy.
Services for Planning
Services for Maintenance
Services for Production
and Logistics
Services for Training
You will find the complete tool range of our three competence brands Walter, Walter Titex and Walter Prototyp in the new 2012 edition of the general catalogue and in this new products brochure for 2012-2 “New products, convincing performance”. It replaces the previous brochure 2012-1 “The right choice, guaranteed”.
They contain all the precision tools you need in your production facilities for turning, boring, milling and threading.
We will be pleased to send you the new general catalogue on request.
= the full range of tools
Walter general catalogue+ new products brochure
_A COMPENDIUM Of ExPERTISE IN MACHINING
Turning, drilling, threading, milling, adaptors
Complete Catalogue
_INNOVATIONS
Turning, drilling, threading, milling, adaptors
Product innovationsEdition 2012-2
New products, convincing performance.
Wal
ter
prod
uct
inno
vati
ons
· Edi
tion
201
2-2
_INNOVATIONS
New products, convincing performance.
Prin
ted
in G
erm
any
629
0092
(08/
2012
) EN
Walter GB LTD. Bromsgrove, England +44 (1527) 839 450, [email protected] Walter Wuxi Co. Ltd. Wuxi, Jiangsu, P.R. China +86 (510) 8241 9399, [email protected] Walter AG Singapore Pte. Ltd. +65 6773 6180, [email protected] Walter Korea Ltd. Anyang-si Gyeonggi-do, Korea +82 (31) 337 6100, [email protected] Walter Tools India Pvt. Ltd. Pune, India +91 (20) 3045 7300, [email protected] Walter (Thailand) Co., Ltd. Bangkok, 10120, Thailand +66 2 687 0388, [email protected] Walter Malaysia Sdn. Bhd. Selangor D.E., Malaysia +60 (3) 8023 7748, [email protected] Walter Australia Pty. Ltd. Hallam, Victoria 3803, Australia +61 3 8793 1000, [email protected] Walter Tooling Japan K.K. Nagoya, Japan +81 (52) 723 5800, [email protected] Walter USA, LLC Waukesha WI, USA +1 800-945-5554, [email protected] Walter Canada Mississauga, Canada [email protected]
Walter AG
Derendinger Straße 53, 72072 Tübingen Postfach 2049, 72010 Tübingen Germany www.walter-tools.com www.facebook.com/waltertools www.youtube.com/waltertools
Product innovations Edition 2012-2
Turning, drilling, threading,milling, adaptors