Pagina / Page 406 407 OL8000-OL8005 OL8010-8015 Innesti rapidi ISO 7241-1 Parte A Innesti rapidi ISO 7241-1 Parte B Quick-release couplings ISO 7241-1 Part A Quick-release couplings ISO 7241-1 Part B Pagina / Page 408 409 OL8020-OL8025 OL8030-OL8035 Innesti rapidi ISO 7241-1 Parte B / AISI 316 Innesti rapidi ISO 7241-1 Parte B / Ottone Quick-release couplings ISO 7241-1 Part B / AISI 316 Quick-release couplings ISO 7241-1 Part B / Brass Pagina / Page 410 411 OL8040-OL8045 OL8050-OL8055 Innesti rapidi serie HV Innesti rapidi serie HS HV series quick-release couplings HS series quick-release couplings Pagina / Page 412 412 OL8060-OL8065 OL8070-OL8075 Innesti rapidi Push-Pull Innesti rapidi Push-Pull Push-Pull quick-release couplings Push-Pull quick-release couplings Pagina / Page 413 414 OL8080-OL8085 OL8090-OL8095 Innesti rapidi a sfera Innesti rapidi a vite Ball quick-release couplings Screw quick-release couplings Pagina / Page 415 416 OL8100-OL8105 OL8110-OL8115 Innesti rapidi a Faccia Piana Innesti rapidi a Faccia Piana ISO 16028 Flat Face quick-release couplings ISO 16028 Flat Face quick-release couplings Data contained herein are for information purpose only, and it does not enlarge, amend or imply any warranty other than provided by us with the product Any use of the product not in conformance with our instructions may be dangerous. Dimensions and general characteristics may be changed at any time without prior notice. Innesti Rapidi / Quick release couplings 404 ISO 7241-1 ISO 7241-1 Serie HV - HS Push-Pull Sfera & Vite Faccia Piana
18
Embed
Innesti Rapidi / Quick release couplings - RP Santinirpsantini.com/catalogo/innesti-rapidi.pdf · Quick-release couplings ISO 7241-1 Part A Quick-release couplings ISO 7241-1 Part
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Pagina / Page 406 407
OL8000-OL8005 OL8010-8015Innesti rapidi ISO 7241-1 Parte A Innesti rapidi ISO 7241-1 Parte B
Quick-release couplings ISO 7241-1 Part A Quick-release couplings ISO 7241-1 Part B
Pagina / Page 408 409
OL8020-OL8025 OL8030-OL8035Innesti rapidi ISO 7241-1 Parte B / AISI 316 Innesti rapidi ISO 7241-1 Parte B / Ottone
Quick-release couplings ISO 7241-1 Part B / AISI 316 Quick-release couplings ISO 7241-1 Part B / Brass
Pagina / Page 410 411
OL8040-OL8045 OL8050-OL8055Innesti rapidi serie HV Innesti rapidi serie HS
HV series quick-release couplings HS series quick-release couplings
OL8100-OL8105 OL8110-OL8115Innesti rapidi a Faccia Piana Innesti rapidi a Faccia Piana ISO 16028
Flat Face quick-release couplings ISO 16028 Flat Face quick-release couplings
Data contained herein are for information purpose only, and it does not enlarge, amend or imply any warranty other than provided by us with the productAny use of the product not in conformance with our instructions may be dangerous.
Dimensions and general characteristics may be changed at any time without prior notice.
Innesti Rapidi / Quick release couplings
404
ISO 7241-1
ISO 7241-1
Serie HV - HS
Push-Pull
Sfera & Vite
Faccia Piana
Pagina / Page 417 418
OL8120-OL8125 OL8130-OL8135Innesti rapidi vite alta pressione Innesti rapidi a Faccia Piana a vite
High pressure screw type couplings Screw Flat Face quick-release couplings
OL8170 OL8180Giunti girevoli a 90° Giunti girevoli a 90°
90° Swivel joint 90° Swivel joint
Data contained herein are for information purpose only, and it does not enlarge, amend or imply any warranty other than provided by us with the productAny use of the product not in conformance with our instructions may be dangerous.
Dimensions and general characteristics may be changed at any time without prior notice.
Innesti Rapidi / Quick release couplings
405
Faccia Piana
Faccia Piana
Girevoli Diritti
Girevoli 90
Quick-release couplings ISO 7241-1 Part A
Caratteristiche: Features:● ●
● Intercambiabilità secondo ISO 7241-1 parte A ● Interchangeability: according to ISO 7241-1 part A standard
● Occlusione a valvola ● Shut-off poppet valve system
● ●
● ●
● Anelli antiestrusioni in PTFE. ● Back up rings in PTFE.
● Temperature esercizio con guarnizioni standard (NBR):-25°C + 125 °C ● Working temperatures with standard seals (NBR) from -25°C to +125°C
● Innestabilità in assenza di pressione. ● Connectability without pressure
● Disinnestabilità in pressione non consentita. ● Disconnection under pressure is not allowed
● ●
● Sono disponibili tappi di protezione in PVC, Nylon e Alluminio. ● Pvc, Nylon and Aluminium protective dust plugs and caps are available
* a richiesta sono disponibili filettature Metriche, NPTF e UNF.
* Metric, NPTF and UNF threads are available on request.
406
04
12
32
06
20
OL8005-07OL8005-08
OL8000-07OL8000-08
Femmina/ FemaleOL8000-01
OL8005-06
OL8005-03OL8005-04
OL8000-06
OL8000-03OL8000-04
OL8005-05
CodicePart number
OL8005-01
OL8000-05
OL8000Innesti rapidi ISO 7241-1 Parte A--VERSIONE ECONOMI CA
Base
Technical data
Guarnizioni standard in gomma nitrilica (NBR) antiolio. A richiestasono disponibili in EPDM; Viton; CR (Neoprene) o altro.
Esecuzione standard in acciaio con alta percentuale di carbonio,carbonitrurazione e tempra ad induzione per le parti soggette adusura.
OL8000-02 OL8005-02
DN
It is the most used quick release coupling in a wide range ofhydraulic applications including industrial and agricultural.Rugged construction makes it a good choice for mobileapplications including dump trucks, trucks trailer connections,snowplows etc... .
Dimension
Gli innesti rapidi serie OL8000/5 sono costruiti a seconda della normaISO 7241-1 parte A
Portata
The series OL8000/5 quick couplings are manufactured according to theISO 7241-1 part A standard
Standard seals material are Nitrile Rubber (NBR) On request: Viton,EPDM, Neoprene (CR) or other seals.
16
OL8005
Innesti Rapidi / Quick release couplings
A richiesta è disponibile la versione innestabile con pressione residuaunicamente per il Ø 1/2".
Dimensioni
Maschio/Male
24
E' l'innesto rapido più comunemente utilizzato nelle svariateapplicazioni oleodinamiche dei settori industriale e agricolo. La suacostruzione robusta lo rende idoneo anche per il settore mobilecome autoribaltabili, connessioni per rimorchi spazzaneve, ecc.. .
Pressione
bar
Size Pressure
08
On request, size 1/2" only is available with connectability in presence ofresidual pressure
Peso / Weight
Machined from high tensile steel and carbonitrited / induction hardenedfor wear parts.
DN
Quick-release couplings ISO 7241-1 Part B
Caratteristiche:● ●
● Intercambiabilità secondo ISO 7241-1 parte B ● Interchangeability: according to ISO 7241-1 part B standard
● Occlusione a valvola ● Shut-off poppet valve system
● ●
● ●
● Anelli antiestrusioni in PTFE. ● Back up rings in PTFE.
● Temperature esercizio con guarnizioni standard (NBR):-25°C + 125 °C ● Working temperatures with standard seals (NBR) from -25°C to +125°C
● Innestabilità in assenza di pressione. ● Connectability without pressure
● Disinnestabilità in pressione non consentita. ● Disconnection under pressure is not allowed
● Sono disponibili tappi di protezione in PVC, Nylon e Alluminio. ● Pvc, Nylon and Aluminium protective dust plugs and caps are available
* a richiesta sono disponibili filettature Metriche, NPTF e UNF.
* Metric, NPTF and UNF threads are available on request.
407
OL8010
OL8015
OL8010-04
Base
Esecuzione standard in acciaio con alta percentuale di carbonio,carbonitrurazione e tempra ad induzione per le parti soggette adusura.
Dimensioni
OL8015-02
Part number
OL8010-05
OL8010-01
OL8010-06
OL8010-03
Dimension
OL8015-06
Femmina/ FemaleOL8015-01
Codice
Maschio/ Male
OL8015-03OL8015-04OL8015-05
DN
DN
02
OL8010-02
12
Innesti rapidi ISO 7241-1 Parte B--VERSIONE ECONOMI CA
Features:
Guarnizioni standard in gomma nitrilica (NBR) antiolio. A richiestasono disponibili in EPDM; Viton; CR (Neoprene) o altro.
The series OL8010/5 quick couplings are manufactured according to theISO 7241-1 part B standard
Standard seals material are Nitrile Rubber (NBR) On request: Viton,EPDM, Neoprene (CR) or other seals.
Portata
Gli innesti rapidi serie OL8010/5 sono costruiti a seconda della normaISO 7241-1 parte B
16
Innesto rapido multiuso più impiegato nell'impiantistica industriale.Principalmente utilizzato per fluidi idraulici, è anche adoperato confluidi chimici, alcuni gas, acqua e vapore.
It is the general purpose coupling most used accross the range ofhydraulic applications in industry. Primarily used with hydraulicfluid, the general purpose coupling is also used with chemicals,some gases, water and steam.
Size Pressure
06
08
Innesti Rapidi / Quick release couplings
Peso / Weight
Machined from high tensile steel and carbonitrited / induction hardened forwear parts.
Technical data
Pressione
bar
04
Quick-release couplings ISO 7241-1 Part B / AISI 31 6
Caratteristiche:● ●
● Intercambiabilità secondo ISO 7241-1 parte B ● Interchangeability: according to ISO 7241-1 part B standard
● Occlusione a valvola ● Shut-off poppet valve system
● ●
● ●
● Anelli antiestrusioni in PTFE. ● Back up rings in PTFE.
● Temperature esercizio con guarnizioni standard (NBR):-25°C + 125 °C ● Working temperatures with standard seals (NBR) from -25°C to +125°C
● Innestabilità in assenza di pressione. ● Connectability without pressure
● Disinnestabilità in pressione non consentita. ● Disconnection under pressure is not allowed
● Sono disponibili tappi di protezione in PVC, Nylon e Alluminio. ● Pvc, Nylon and Aluminium protective dust plugs and caps are available
* a richiesta sono disponibili filettature Metriche, NPTF e UNF.
* Metric, NPTF and UNF threads are available on request.
12
02
408
Dimensioni
08
04
Codice
16
Part number DimensionDN
Peso / Weight
Pressure
06
Pressione
bar
DN
OL8020-03
OL8020
OL8025Innesti rapidi ISO 7241-1 Parte B / AISI 316
Features:
Innesto rapido multiuso più impiegato nell'impiantistica industriale.Principalmente utilizzato per fluidi idraulici, è anche adoperato confluidi chimici, alcuni gas, acqua e vapore.
It is the most used general purpose coupling accross the range ofhydraulic applications in industry. Primarily used with hydraulicfluid, the general purpose coupling is also used with chemicals,some gases, water and steam.
Size
Base
Technical data
Femmina/ Female
Portata
OL8020-01
OL8020-06OL8020-05
OL8025-06
Maschio/ Male
OL8025-03
OL8025-05OL8025-04
OL8020-02OL8025-01
Innesti Rapidi / Quick release couplings
OL8020-04
Standard seals material are Nitrile Rubber (NBR) On request: Viton,EPDM, Neoprene (CR) or other seals.
Machined from Stainless Steel AISI 316. Springs, balls, valves andguidevalves in Stainless Steel AISI 316.
The series OL8020/5 quick couplings are manufactured according to theISO 7241-1 part B standard
OL8025-02
Completamente costruito in acciaio innossidabile AISI 316. Mollesfere, sfere, valvola e guidavalvola in acciaio innossidabile AISI 316.
Gli innesti rapidi serie OL8020/5 sono costruiti a seconda della normaISO 7241-1 parte B
Guarnizioni standard in gomma nitrilica (NBR) antiolio. A richiestasono disponibili in EPDM; Viton; CR (Neoprene) o altro.
ydraulic Quick Couplings
Quick-release couplings ISO 7241-1 Part B / Brass
Caratteristiche:● ●
● Intercambiabilità secondo ISO 7241-1 parte B ● Interchangeability: according to ISO 7241-1 part B standard
● Occlusione a valvola ● Shut-off poppet valve system
● ●
● ●
● Anelli antiestrusioni in PTFE. ● Back up rings in PTFE.
● Temperature esercizio con guarnizioni standard (NBR):-25°C + 125 °C ● Working temperatures with standard seals (NBR) from -25°C to +125°C
● Innestabilità in assenza di pressione. ● Connectability without pressure
● Disinnestabilità in pressione non consentita. ● Disconnection under pressure is not allowed
● Sono disponibili tappi di protezione in PVC, Nylon e Alluminio. ● Pvc, Nylon and Aluminium protective dust plugs and caps are available
* a richiesta sono disponibili filettature Metriche, NPTF e UNF.
* Metric, NPTF and UNF threads are available on request.
Completamente costruito in ottone. Molle sfere, sfere, valvola eguidavalvola in acciaio innossidabile AISI 316.
Maschio/ Male
OL8030-05
OL8030-01
OL8030-06
409
OL8035-03OL8035-04
OL8030-03OL8030-04
Femmina/ Female
OL8035-05
DimensioniDimension
OL8035-01
OL8035-06
Codice
OL8035-02OL8030-02
Machined from brass. Springs, balls, valves and guidevalves in StainlessSteel AISI 316.
Guarnizioni standard in gomma nitrilica (NBR) antiolio. A richiestasono disponibili in EPDM; Viton; CR (Neoprene) o altro.
Standard seals material are Nitrile Rubber (NBR) On request: Viton,EPDM, Neoprene (CR) or other seals.
Part number
Innesti Rapidi / Quick release couplings
Innesti rapidi ISO 7241-1 Parte B / Ottone
Features:The series OL8030/5 quick couplings are manufactured according to theISO 7241-1 part B standard
DN
OL8035
16
Peso / Weight
It is the most used general purpose coupling accross the range ofhydraulic applications in industry. Primarily used with hydraulicfluid, the general purpose coupling is also used with chemicals,some gases, water and steam.
Size Pressure
06
08
Technical data
DN
02
04
Innesto rapido multiuso più impiegato nell'impiantistica industriale.Principalmente utilizzato per fluidi idraulici, è anche adoperato confluidi chimici, alcuni gas, acqua e vapore.
Portata
12
Base
OL8030
Pressione
bar
Gli innesti rapidi serie OL8030/5 sono costruiti a seconda della normaISO 7241-1 parte B
HV series quick-release couplings
Caratteristiche:● Innesti rapidi serie OL8040/5 per agricoltura/industria ● Series OL8040/5 quick couplings for agriculture/industry
● ●
● Occlusione a valvola ● Shut-off poppet valve system
● ●
● Anelli antiestrusioni in PTFE. ● Back up rings in PTFE.
● Temperature esercizio con guarnizioni standard (NBR):-25°C + 125 °C ● Working temperatures with standard seals (NBR) from -25°C to +125°C
● Innestabilità in assenza di pressione. ● Connectability without pressure
● Disinnestabilità in pressione non consentita. ● Disconnection under pressure is not allowed
● ●
● Sono disponibili tappi di protezione in PVC, Nylon e Alluminio. ● Pvc, Nylon and Aluminium protective dust plugs and caps are available
* a richiesta sono disponibili filettature Metriche, NPTF e UNF.
* Metric, NPTF and UNF threads are available on request.
412
Size
DN
bar
Pressure
DimensioniDimension
OL8060/5
OL8070/5
Machined from high tensile steel and carbonitrited / induction hardenedfor wear parts.
DN
Guarnizioni standard in gomma nitrilica (NBR) antiolio. A richiestasono disponibili in EPDM; Viton; CR (Neoprene) o altro.
Standard seals material are Nitrile Rubber (NBR) On request: Viton,EPDM, Neoprene (CR) or other seals.
La serie OL8060/5-OL8070/5 l'innesto rapido è la soluzione ottimale perl'industria agricola. Ideale per l'installazione su trattori, macchine eattrezzature agricole. Grazie alla sua ghiera a doppio effetto permettedi innestare e disinnestare con facilità in spazi ristretti.
The OL8060/5-OL8070/5 series coupling is manufactured a goodchoice of agricultural applications. Thanks to its a double effectssleeve makes it very easy to connect and to disconnect in a very littleroom.
Codice
Innesti rapidi Push-Pull
Base
Technical dataPeso / Weight
Features:
08
OL8060-01
Part numberMaschio/ Male
OL8070-01 OL8075-01OL8065-01
Femmina/ Female
Innesti Rapidi / Quick release couplings
PortataPressione
Gli innesti rapidi serie OL8060/5-OL8070/5 sono intercambiabilisecondo ISO 7241-1 parte A
The series OL8060/5-OL8070/5 quick couplings are interchangeableaccording to ISO 7241-1 part A standard
A richiesta è disponibile la versione innestabile con pressione residua On request, size 1/2" is available with connectability in presence ofresidual pressure
Esecuzione standard in acciaio con alta percentuale di carbonio,carbonitrurazione e tempra ad induzione per le parti soggette adusura.
Ball quick-release couplings
Caratteristiche:● Innesti rapidi serie OL8080/5 con connessione a sfera ● The OL8080/5 Series, ball-to-connect couplings
● Occlusione a valvola ● Shut-off poppet valve system
● ●
● ●
● Anelli antiestrusioni in PTFE. ● Back up rings in PTFE.
● Temperature esercizio con guarnizioni standard (NBR):-25°C + 125 °C ● Working temperatures with standard seals (NBR) from -25°C to +125°C
● Sono disponibili tappi di protezione in acciaio ● Steel protective dust plugs and caps are available
* a richiesta sono disponibili filettature Metriche, NPTF e UNF.
* Metric, NPTF and UNF threads are available on request.
414
OL8090
OL8095
Technical data
Base DN Pressione
Esecuzione standard in acciaio con alta percentuale di carbonio,carbonitrurazione e tempra ad induzione per le parti soggette adusura.
Innesti rapidi a vite
Machined from high tensile steel and carbonitrited / induction hardened forwear parts.
Guarnizioni standard in gomma nitrilica (NBR) antiolio. A richiestasono disponibili in EPDM; Viton; CR (Neoprene) o altro.
Standard seals material are Nitrile Rubber (NBR) On request: Viton, EPDM, Neoprene (CR) or other seals.
PortataPeso / Weight
12
20
Size Pressure
bar
04
08
06
16
DimensioniDimension
24
CodicePart number
The OL8090/5 Series, thread-to-connect couplings can be used in a wide range ofindustrial applications where heavy-duty couplings are required that can be connectedunder pressure, with little or no spillage, high peak pressure, vibrations. etc… .
32
Femmina/ FemaleOL8095-01OL8095-02
Maschio/ Male
OL8090-02
40
48
La serie OL8090/5, innesto rapido a vite, è utilizzato per applicazioni oleodinamicheindustriali molto gravose dove necessita la connessione e la disconnessione inpresenza di pressione residue, perdite d'olio ridotte, in frequenti picchi di pressione,vibrazioni, ecc… .
DN
OL8090-09OL8090-10
OL8095-09OL8095-10
Features:
OL8090-08OL8090-07OL8090-06 OL8095-06
OL8095-07
Innesti Rapidi / Quick release couplings
OL8095-08
OL8095-04OL8095-05
OL8095-03OL8090-03OL8090-04OL8090-05
OL8090-01
Flat Face quick-release couplings
Caratteristiche:● ●
● Occlusione a faccia piana ● Shut-off flat valve system
● ●
● ●
● Anelli antiestrusioni in PTFE. ● Back up rings in PTFE.
● Temperature esercizio con guarnizioni standard (NBR):-25°C + 100°C ● Working temperatures with standard seals (NBR) from -25°C to +100°C
● Sistema di sicurezza contro lo sganciamento accidentale ● Safety system protecting against accidental disconnection
● ●
● Evita l’intromissione d’aria durante la connessione ● Avoid air inclusion during connection
● Facile da pulire ● Easy to clean
● Sono disponibili tappi di protezione in PVC, Nylon e Alluminio. ● Pvc, Nylon and Aluminium protective dust plugs and caps are available
Dati Tecnici
Base Portata
ISO Femmina MaschioISO Rated Female MaleSize WP BP ∆P Flow
* a richiesta sono disponibili filettature Metriche, NPTF e UNF.
* Metric, NPTF and UNF threads are available on request.
415
Femmina/ Female
Technical data
Maschio/ Male
Part number
OL8105-03OL8105-04
OL8105-09
OL8105-0512,5*
3/8"
19,0*
OL8100-02
08
10,0*
1/2" OL8100-04
OL8105-08
06
3/4" 12OL8105-07
OL8100-05
OL8100-07
OL8105-02
Peso / Weight
OL8100-06 OL8105-06
Size
OL8105-01
OL8100-11OL8100-10 OL8105-10
OL8105-11
OL8100-09
OL8100-03
OL8100-08
Codice
Guarnizioni standard in gomma nitrilica (NBR) antiolio. A richiesta sonodisponibili in EPDM; Viton; CR (Neoprene) o altro.
Intercambiabilità secondo ISO 16028 nella dimensione 10 e' conformeanche allo standard NFPA T3.20.15 (HTMA).
Machined from high tensile steel and carbonitrited / induction hardened forwear parts.
Standard seals material are Nitrile Rubber (NBR) On request: Viton, EPDM,Neoprene (CR) or other seals.
Elimina le perdite d'olio durante la connessione e disconnessione diattrezzature idrauliche
OL8100-01
The OL8100/5 Series couplings are widely used across the spectrum ofhydraulic applications in construction, industrial and agricultural equipmentmarkets. Thanks to its design, It stops external agents from incoming,restricting the problems caused by contamination of the hydraulic plant andrestrain problems for environmental pollution due to hydraulic oil spillage
DimensionSize
Base
Interchangeability: according to ISO 16028.The size 10 is in accordance withNFPA T3.20.15 (HTMA) too.
La serie 80FF l'innesto rapido è largamente utilizzato nelle applicazionioleodinamiche nel settore edilizio, industriale e degli equipaggiamenti agricoli.Grazie alla sua particolare costruzione, impedisce l'intrusione di agenti estraneilimitando al minimo i problemi di contaminazione dell'impianto oleodinamico e dieliminare problemi di inquinamento ambientale.
Pressione
Dimensioni
Base
Innesti Rapidi / Quick release couplings
Eliminate hydraulic spillage when connecting or disconnecting hydraulicattachments
Pressure
Esecuzione standard in acciaio con alta percentuale di carbonio,carbonitrurazione e tempra ad induzione per le parti soggette ad usura.
OL8100
OL8105
Features:
Innesti rapidi a Faccia Piana
ISO 16028 Flat Face quick-release couplings
Caratteristiche:● ●
● Occlusione a faccia piana ● Shut-off flat valve system
● ●
● ●
● Anelli antiestrusioni in PTFE. ● Back up rings in PTFE.
● Temperature esercizio con guarnizioni standard (NBR):-25°C + 100°C ● Working temperatures with standard seals (NBR) from -25°C to +100°C
● Sistema di sicurezza contro lo sganciamento accidentale ● Safety system protecting against accidental disconnection
● ●
● Evita l’intromissione d’aria durante la connessione ● Avoid air inclusion during connection
● Facile da pulire ● Easy to clean
● Sono disponibili tappi di protezione in PVC, Nylon e Alluminio. ● Pvc, Nylon and Aluminium protective dust plugs and caps are available
Dati Tecnici
Base Portata
ISO Femmina MaschioISO Rated Female MaleSize WP BP ∆P Flow
* a richiesta sono disponibili filettature Metriche, NPTF e UNF.
* Metric, NPTF and UNF threads are available on request.
416
OL8110
OL8115
OL8110-08
OL8115-02
OL8115-05OL8110-05
OL8115-01
Guarnizioni standard in gomma nitrilica (NBR) antiolio. A richiesta sonodisponibili in EPDM; Viton; CR (Neoprene) o altro.
Standard seals material are Nitrile Rubber (NBR) On request: Viton, EPDM,Neoprene (CR) or other seals.
Esecuzione standard in acciaio con alta percentuale di carbonio,carbonitrurazione e tempra ad induzione per le parti soggette ad usura.
Size
OL8115-07
OL8115-09OL8115-08
10,0*
3/4"
OL8115-033/8"
12,5*
OL8110-1116
OL8110-12OL8115-11
Elimina le perdite d'olio durante la connessione e disconnessione diattrezzature idrauliche
Eliminate hydraulic spillage when connecting or disconnecting hydraulicattachments
1"
08 1/2"
06
OL8110-01
OL8110-03OL8110-04
OL8110-02
OL8110-10
OL8110-07
OL8110-09
OL8115-12
Maschio/ Male
19,0* 12
25,0*
OL8110-06 OL8115-06
Femmina/ Female
OL8115-04
OL8115-10
Innesti Rapidi / Quick release couplings
Dimension
Base
The OL8110/5 Series couplings are widely used across the spectrum ofhydraulic applications in construction, industrial and agricultural equipmentmarkets. Thanks to its design, It stops external agents from incoming,restricting the problems caused by contamination of the hydraulic plant andrestrain problems for environmental pollution due to hydraulic oil spillage
Base
CodicePart number
PressureSize
Dimensioni
La serie OL8110/5 l'innesto rapido è largamente utilizzato nelle applicazionioleodinamiche nel settore edilizio, industriale e degli equipaggiamenti agricoli.Grazie alla sua particolare costruzione, impedisce l'intrusione di agenti estraneilimitando al minimo i problemi di contaminazione dell'impianto oleodinamico e dieliminare problemi di inquinamento ambientale.
Innesti rapidi a Faccia Piana ISO 16028
Pressione
Technical data
Features:Intercambiabilità secondo ISO 16028 nella dimensione 10 e' conformeanche allo standard NFPA T3.20.15 (HTMA).
Interchangeability: according to ISO 16028.The size 10 is in accordance withNFPA T3.20.15 (HTMA) too.
Peso / Weight
Machined from high tensile steel and carbonitrited / induction hardened forwear parts.
High pressure screw type couplings
Caratteristiche:● ●
● Occlusione con valvola a sfera ● Shut-off ball valve system
● ●
● ●
● Anelli antiestrusioni in PTFE. ● Back up rings in PTFE.
● Temperature esercizio con guarnizioni standard (NBR):-25°C + 125 °C ● Working temperatures with standard seals (NBR) from -25°C to +125°C
● Innestabilità in pressione. ● Connectability with pressure
● Disinnestabilità in pressione ● Disconnection under pressure
● ●
● A richiesta sono disponibili tappi di protezione in metallo ● On request steel protective dust plugs and caps are available
Dati Tecnici
Femmina MaschioRated Female Male
WP BP ∆P Flow
mm inch l/m Kg Kg
6,3 1/4" 700 2200 0,150 0,080
10,0 3/8" 700 1850 0,200 0,120 Applicazioni
Application
DimensioniDimension
Base FilettoSize Thread
mm Poll. F A B Ø L E 1 E2
04 6,3 1/4" 1/4" NPTF 60,8 32,5 28 19 22
06 10 3/8" 1/4" NPTF 72,3 40,0 35 32 24
06 10 3/8" 3/8" NPTF 72,3 40,0 35 32 24
417
OL8120
OL8125
Esecuzione standard in acciaio con alta percentuale di carbonio,carbonitrurazione e tempra ad induzione per le parti soggette adusura.
Machined from high tensile steel and carbonitrited / induction hardened forwear parts.
Guarnizioni standard in gomma nitrilica (NBR) antiolio. A richiestasono disponibili in EPDM; Viton; CR (Neoprene) o altro.
OL8125-01
DimensionFemmina/ Female
A richiesta è disponibile la versione innestabile con pressione residua On request, size 1/2" is available with connectability in presence ofresidual pressure
Pressure
Pressione
THE OL8120/5 series couplings thread-to-connect couplings, aredesigned for extreme high static pressure applications.It is suitable forhigh peak pressure, vibrations. etc, and where it is necessary to connectand disconnect with residual pressure inside. It is used in heavy dutyhydraulic applications such as hydraulic rams etc... .
PortataPeso / Weight
Technical data
Size
Standard seals material are Nitrile Rubber (NBR) On request: Viton,EPDM, Neoprene (CR) or other seals.
DimensioniDN
Innesti rapidi vite alta pressione
CodicePart number
Base DN
Gli innesti rapidi serie OL8120/5 sono intercambiabili con gli altricostruttori europei e americani
The series OL8120/5 quick couplings are interchangeable according tothe European and American manufacturer.
Maschio/ Male
OL8120-02
OL8120-03
OL8120-01
OL8125-02
OL8125-03
Innesti Rapidi / Quick release couplings
Features:
La serie OL8120/5, è l' innesto rapido a vite costruito per pressioni staticheelevate, ha una grande resistenza a picchi di pressione, vibrazioni, ecc…e dove necessita la connessione e la disconnessione in presenza dipressione residue. E' utilizzato per applicazioni oleodinamiche moltogravose come per i martinetti idraulici ecc... .
bar
04
06
Screw Flat Face quick-release couplings
Caratteristiche:● ●
● Occlusione a faccia piana ● Shut-off flat valve system
● ●
● ●
● Anelli antiestrusioni in PTFE. ● Back up rings in PTFE.
● Temperature esercizio con guarnizioni standard (NBR):-25°C + 100 °C ● Working temperatures with standard seals (NBR) from -25°C to + 100°C
● ●
● Evita l’intromissione d’aria durante la connessione ● Avoid air inclusion during connection
● Facile da pulire ● Easy to clean
● A richiesta sono disponibili tappi di protezione in metallo ● On request steel protective dust plugs and caps are available
* a richiesta sono disponibili filettature Metriche, NPTF e UNF.
* Metric, NPTF and UNF threads are available on request.
418
Machined from high tensile steel with QPQ treatment for the main body,zinc plated with a yellow chromate finish for the rest.
Elimina le perdite d'olio durante la connessione e disconnessione diattrezzature idrauliche
Eliminates hydraulic spillage when connecting or disconnectinghydraulic attachments
Guarnizioni standard in gomma nitrilica (NBR) antiolio. A richiesta sonodisponibili in EPDM; Viton; CR (Neoprene) o altro.
Standard seals material are Nitrile Rubber (NBR) On request: Viton,EPDM, Neoprene (CR) or other seals.
ISO
Peso / Weight
Size
Codice
Part number
Size
OL8130
OL8135
The series "OL8130/5" are used in a heavy duty work conditions, in the presence ofhigh pressure peaks, in very dirty environments and high mechanical stress. Theseries "OL8130/5" are particularly suitable on closed circuits and they are used in awide range such as truck loader, hydraulic excavators, etc... . They are different tothe "80FP" series for the coupled external system only.
Filetto*
Thread*
Dimensioni
Dimension
Gli innesti della serie "OL8130/5" sono utilizzabili in condizioni di lavoro molto gravosecon alti picchi di pressioni, ambienti molto sporchi e forti sollecitazioni meccaniche.Sono particolarmente consigliati sui circuiti chiusi nei settori piu' diversi come ruspe,escavatori, ecc... . Si differenziano dalla serie "80FP" solamente per il tipo di aggancioesterno.
3/8" BSPP
1/2" BSPP
3/4" BSPP
1/2" BSPP
1/4" BSPP
Size
12,5* 08 1/2"
06 3/8" 10,0*
OL8135-09
1"1/4 BSPP
1"1/2 BSPP
Maschio/ Male
OL8130-02
OL8130-05
OL8130-07
OL8130-09
OL8130-03
OL8130-04
Innesti rapidi a Faccia Piana a vite
Pressione Base
ISO
Technical data
Features:Innesti rapidi a vite serie OL8130/5 sono innestabili con Alte pressioniresidue, sia nella parte femmina che nella parte maschio o in entrambi.Connessione e disconnessione con pressioni residue fino a 300 bar
Base
Esecuzione standard in acciaio con alta percentuale di carbonio zincatocon trattamento QPQ per il corpo principale, zincatura e passivazionegialla per altre parti.
Base
OL8135-05
OL8135-06
Femmina/ Female
OL8135-01
OL8135-02
OL8135-03
OL8135-04
OL8130-01
Innesti Rapidi / Quick release couplings
OL8135-07
OL8130-06
OL8130-08 OL8135-08
3/4" BSPP
1" BSPP
Pressure
The series "OL8130/5" thread-to-connect couplings are connectableunder high residual pressure whether in the female, in the male or bothparts. Connection and disconnection at residual pressures of up to 300bar without spilling fluids.
Screw Flat Face quick-release couplings
Caratteristiche:● ●
● Sistema di sicurezza contro il disaccoppiamento accidentale ● Safety system protecting against accidental disconnection
● Occlusione a faccia piana ● Shut-off flat valve system
● ●
● ●
● Anelli antiestrusioni in PTFE. ● Back up rings in PTFE.
● Temperature esercizio con guarnizioni standard (NBR):-25°C + 100 °C ● Working temperatures with standard seals (NBR) from -25°C to + 100°C
● ●
● Evita l’intromissione d’aria durante la connessione ● Avoid air inclusion during connection
● Facile da pulire ● Easy to clean
● A richiesta sono disponibili tappi di protezione in metallo ● On request steel protective dust plugs and caps are available
* a richiesta sono disponibili filettature Metriche, NPTF e UNF.
* Metric, NPTF and UNF threads are available on request.
OL8145-02
OL8140-03 OL8145-03
OL8140-01
419
OL8140
OL8145
Technical data
Size Pressure
Innesti rapidi a Faccia Piana a vite
OL8141-01 OL8146-01
Femmina/ Female
Features:
Esecuzione standard in acciaio con alta percentuale di carbonio zincatocon trattamento QPQ per il corpo principale, zincatura e passivazionegialla per altre parti.
Machined from high tensile steel with QPQ treatment for the main body,zinc plated with a yellow chromate finish for the rest.
Guarnizioni standard in gomma nitrilica (NBR) antiolio. A richiesta sonodisponibili in EPDM; Viton; CR (Neoprene) o altro.
The series OL8141/6 are used in a heavy duty work conditions, in the presence ofhigh pressure peaks, in very dirty environments and high mechanical stress. Theseries "80FV" are particularly suitable on closed circuits and they are used in a widerange such as truck loader, hydraulic excavators, etc... .
Filetto*
Thread*
Dimensioni
Standard seals material are Nitrile Rubber (NBR) On request: Viton,EPDM, Neoprene (CR) or other seals.
Maschio/ Male
Base
OL8140-04
Part number
Base
Size
Pressione
ISO
OL8140-02
OL8140-06 1"1/2 BSPP
3/4" BSPP
1" BSPPOL8145-04
OL8140-05
Gli innesti della serie OL8141/6 sono utilizzabili in condizioni di lavoro molto gravosecon alti picchi di pressioni, ambienti molto sporchi e forti sollecitazioni meccaniche.Sono particolarmente consigliati sui circuiti chiusi nei settori piu' diversi come ruspe,escavatori, ecc... .
1/4" BSPPOL8145-01
1/2" BSPP08 1/2"
3/8" BSPP
1/2" BSPP
3/4" BSPP
10,0*
Elimina le perdite d'olio durante la connessione e disconnessione diattrezzature idrauliche
Eliminate hydraulic spillage when connecting or disconnecting hydraulic attachments
ISO
Peso / Weight
Dimension
Innesti Rapidi / Quick release couplings
The series OL8141/6 thread-to-connect couplings are connectableunder high residual pressure whether in the female, in the male or bothparts. Connection and disconnection at residual pressures of up to 300bar without spilling fluids.
Innesti rapidi a vite serie OL8141/6 sono innestabili con Alte pressioniresidue, sia nella parte femmina che nella parte maschio o in entrambi.Connessione e disconnessione con pressioni residue fino a 300 bar
Codice Base
Size
06 3/8"
1"1/4 BSPP
OL8145-06
OL8145-05
12,5*
Straight swivel joint
Caratteristiche:● ●
● ●
● ●
● Temperature esercizio con guarnizioni standard (NBR):-20°C + 110 °C ● Working temperatures with standard seals (NBR) from -20°C to + 110°C
● Trattamento a richiesta: QPQ ● QPQ treatment on request
● Materiali a richiesta: acciaio inossidabile AISI 316 ● On request stainless steel AISI 316 version.
OL8150-08 51 2" 2 2" BSPP 250 50 75 118 75 65* a richiesta sono disponibili filettature Metriche, NPTF e UNF. * Metric, NPTF and UNF threads are available on request.
420
Thread*part number
Codice Tipo
TypeDN
One effective solution uses swivel joint to allow hoses to pivot, which prevents orreduces stress from bending, twisting and stretching. These simple swivel fittingsconsiderably increase the operating life of the hose, allow the use of shorter hoselengths and reduce maintenance and downtime.
Filetto*Dimension
Max WP in Rotazione
Max WP Statica
Giunti girevoli diritti
Features:
Machined from high tensile steel and carbonitrited / induction hardenedfor wear parts.
DimensioniMax WP in Rotation Dimension
Max static WP
Dimensioni
L' utilizzo del giunto girevole è la soluzione ideale che permette al tubo dicompensare eventuali torsioni e/o rotazioni. Previene oppure riduce losforzo derivante dalla curvatura, torsione e allungamento del tubo.Questi semplici raccordi girevoli garantiscono l'allungamento della vitadel tubo assemblato, permettono l'utilizzo di tubi più corti e riducono lamanutenzione e i fermi macchina.
Innesti Rapidi / Quick release couplings
OL8150
I giunti girevoli serie OL8150 non sono idonei per rotazioni veloci econtinuative. le rotazioni devono obbligatoriamente essere lente e nonsuperare i 3/5 gpm.
The OL8160 series swivel joints are not suitable for fast and continuosrotation. The rotations are required to be slow and do not exceed 3/5rpm.
Per i giunti girevoli in AISI 316, le pressioni massime di rotazioni estatiche devono essere ridotte di 1/3
For stainless steel AISI 316 version, the max. static and rotationpressure must be reduced by 1/3.
Guarnizioni standard in gomma nitrilica (NBR) antiolio. A richiestasono disponibili in EPDM; Viton; CR (Neoprene) o altro.
Standard seals material are Nitrile Rubber (NBR) On request: Viton,EPDM, Neoprene (CR) or other seals.
Esecuzione standard in acciaio con alta percentuale di carbonio,carbonitrurazione e tempra ad induzione per le parti soggette adusura.
Hydraulic Quick Couplings
90° Swivel joints
Caratteristiche:● ●
● ●
● ●
● Temperature esercizio con guarnizioni standard (NBR):-20°C + 110 °C ● Working temperatures with standard seals (NBR) from -20°C to + 110°C
● Trattamento a richiesta: QPQ ● QPQ treatment on request
● Materiali a richiesta: acciaio inossidabile AISI 316 ● On request stainless steel AISI 316 version.
● ●
Tipo 1 Tipo 2
Applicazioni Application
mm Inch F bar bar B C L E2OL8160-01 6 1/4" 1 1/4" BSPP 400 200 33,5 11 69 19
OL8160-08 51 2" 2 2" BSPP 250 50 64 42 151 65* a richiesta sono disponibili filettature Metriche, NPTF e UNF. * Metric, NPTF and UNF threads are available on request.
421
Innesti Rapidi / Quick release couplings
Max WP in Rotazione
Codice
Per i giunti girevoli in AISI 316, le pressioni massime di rotazioni estatiche devono essere ridotte di 1/3
L' utilizzo del giunto girevole è la soluzione ideale che permette al tubo dicompensare eventuali torsioni e/o rotazioni. Previene oppure riduce losforzo derivante dalla curvatura, torsione e allungamento del tubo.Questi semplici raccordi girevoli garantiscono l'allungamento della vitadel tubo assemblato, permettono l'utilizzo di tubi più corti e riducono lamanutenzione e i fermi macchina.
One effective solution uses swivel joint to allow hoses to pivot, which prevents or reducesstress from bending, twisting and stretching. These simple swivel fittings considerablyincrease the operating life of the hose, allow the use of shorter hose lengths and reducemaintenance and downtime.
Filetto*
Features:
DN
part number
Max WP Statica
For the stainless steel AISI 316 version, the max. static and rotationpressure must be reduced by 1/3.
Esecuzione standard in acciaio con alta percentuale di carbonio,carbonitrurazione e tempra ad induzione per le parti soggette adusura.
DimensionDimensioni
Tipo
Machined from high tensile steel and carbonitrited / induction hardened forwear parts.
Guarnizioni standard in gomma nitrilica (NBR) antiolio. A richiestasono disponibili in EPDM; Viton; CR (Neoprene) o altro.
Standard seals material are Nitrile Rubber (NBR) On request: Viton, EPDM, Neoprene (CR) or other seals.
I giunti girevoli serie OL8160 non sono idonei per rotazioni veloci econtinuative. le rotazioni devono obbligatoriamente essere lente e nonsuperare i 3/5 gpm.
The OL8160 series swivel joints are not suitable for fast and a continuosrotation. The rotations are required to be slow and do not exceed 3/5 rpm.