ingo-man ® The complete series for the medical and industrial field Reference manual Touchless
ingo-man®• housings made of stainless steel and aluminium
• great variety of products
• RAL colours available on request
• very durable product
• very hygienic and easy to clean
• Made in Germany
The complete series for the medical and industrial field
ingo-man® plus
Ophardt • A GROUP OF COMPANIES
ingo-man® – the complete series for the medical field
ingo-man® plus Touchless – the new generation of dispensers
The dispenser generation ingo-man ® plus Touchless offers as a streamline
advancement of the manually operated classic model proved and interesting new
functions. Increased hygienic standard by means of touchless disinfection of hands.
ingo-man® plus – the new complete series
The universal dispenser system with exchangeable pumps.
New design combined with a new cleaning concept
to increase hygiene, user-friendliness and flexibility.
ingo-man® classic – individual dispenser solutions in a wide diversity
The ingo-man ® classic series offers a reasonably priced start-up into the
ingo-man ® family. These dispensers are possessing the most important character-
istic features, i.e. operation by elbow, back panel system and dishwasher-proof.
ingo-man® – dispensers
soap dispensers series 23, submersible pumps, wall holder
and dispensers for washstand installation
ingo-man® – pumps
submersible pumps
ingo-man® classic – dispenser accessories
The ingo-man ® classic series is completed by useful dispenser accessories such as
locking plates, wall holders, adapter plates and drip trays
Paper towel dispenser The ingo-man ® paper towel dispensers are specially designed for great hygienic
demands: they are easy to clean.
The housing made of anodized aluminium has a bacteriostatic effect.
Waste bins The ingo-man ® line of wast bins is the perfect completion of the ingo-man ®
paper towel dispensers. Due to the hygienic back panel system the bins can be
removed from the wall and be cleaned.
ingo-man® classic – accessories
hand brush, brush dispenser, collecting receptacle, disinfectant timer,
gloves dispenser and foot sprayer
ingo-man® classic – industrial dispenser
industrial dispensers, submersible pumps and wall holders
MUW – the back panel system multi-use-wallplates
According to the MUW principle the ingo-man ® dispensers are hanged on
into the back panel by means of a shackle and fixed on it magnetically.
ingo-man® survey
3|4
5|6
7|8
9|12
13|14
15|16
17|18
25|26
27|28
29|30
19|22
23|24
31|32
33|34
3 O p h a r d t • A G R O U P O F C O M P A N I E S
Formation
About more than 40 years ago Hermann Ophardt established
the first OPHARDT business undertaking in Issum/Germany on
the left side of the lower Rhine. From the beginning great value
was attached to DEVELOPMENT. After a short time the start into
a young market for hygienic apparat uses was realized with only
six employees. With a special assortment of soap- and disinfectant
dispensers the business undertaking became a leading producer
of apparat uses for the complete field of sanitation.
The basic idea is to solve the dosing problem of the customer
in order to obtain a competitive advantage in the market.
Development
Thanks to a great depth of manufacture and a good sense for
developments in this special field, the OPHARDT Hygiene-Technik
gained a great know-how. This know-how is the result of great
efforts made to find again and again solutions for the
most different problems of the customers. At the location in
Issum engineers are developing new and innovative products
as well as the necessary equipment and machines.
An up-to-date machinery equipment is at the disposal of all
OPHARDT employees thus securing a flexible adaptation
to the customers’ needs and to changing market situations.
Products
The range of products which are all own developments comprises
sanitary apparatuses for hospitals, industrial areas, households
and public sanitary installations. Among these belong products
such as soap- and disinfectant dispensers, waste containers and
baskets, dispenser combinations for soap and tissues,
toilet paper dispensers and many other useful accessories
completing this series. Of course only high-quality materials
such as stainless steel, aluminium and synthetic material are used.
Furthermore OPHARDT also produces the appropriate
refillable receptacles and dispenser bottles made of
polyethylene or polypropylene.
4
Ballymote, IRL
Maaseik, B
Derby, UK
Issum, D
Niederbipp, CH
Beamsville, CDN
Manila, RP Manila, RP
Beamsville,
Niederbipp, CH
OPHARDT – the company today
The OPHARDT group of companies occupies today worldwide
more than 300 employees within several legally independent
undertakings. Apart from the head office in Issum/Germany
there are other locations in Canada, Belgium, Ireland,
Switzerland, Great Britain and recently in the
United Arabian Emirates and on the Philippines.
5
Q
U A L I T Y
CE
RTIFIED
For more than 40 years the Ophardt group of companies develops, produces and distributes worldwide high-quality dosing systems at DIN ISO 9001-2000 certified locations in Germany, Western Europe and North America.
By means of innovative own products made of aluminium, stainless steel and other metals as well as various synthetics, a development centre and the most up-to-date product engineering Ophardt is extending its position as a market leader in the field of dosing technology.
The hologram distinguishes the original branded products of the ingo-man® series and guarantees proven Ophardt quality!
U A L I T YY
CCERTIFIED
ingo-man® plus T H E C O M P L E T E S E R I E S
20072007
DIN ISO 9001:2000
Engineering efficiency by long serviceable life
Ophardt ingo-man® dispensers are well- known on the market for many years for its high quality and
there is a price to be paid for it. There are for sure more cost effective appliances on the market ....
but owing to the long serviceable life of our dispensers of minimum 15 years the purchase cost are
comparatively low. Thus, we offer high quality for an even better price.
Apart from the general legal liability for material defects (2 years), a voluntary three-year manufac-
turer’s warranty is issued starting from delivery date (applied only in case of intended use and when
using original Ophardt parts).
Hygiene
Very often infections are communicated by the hands. Owing to the small sup-
porting surface of the stainless steel operating lever the danger of transmission of
bacteria is reduced. In addition this hygienic standard is still optimized by our dis-
penser models equipped with a long lever („operatable by elbow“). All ingo-man ®
dispensers and pumps are easy to clean, dishwasher-proof and may also be treated
by autoclave depending on the basic material.
Freely fillable
The dispensers of the ingo-man® line can be filled up with all commercial filling goods such as dis-
infectants, alco gels, liquid soaps, creams and lotions. Thus the operator can reduce the operating
cost by the free choice of suppliers and products.
6
High-quality basic materials
ingo-man® standard products are made of high-quality hygienic aluminium, dull silver anodized or
of high-grade stainless steel (material no. 1.4301/ AISI 304) according to DIN EN 10088-1.
You have the choice between different surface coatings:
- aluminium. dull silver anodized
- brushed stainless steel
- powder coating (available in various RAL colours)
Optional accessories
Our ingo-man® line is completed by a large optional program of accessories. So for each ingo-man®
dispenser locking plates with visual slot/ visual window are available. Towel dispensers, waste bins as
well as other accessories are an optimum completion for the equipment of your specific property.
We are gladly prepared to advise you in more detail.
ingo-man® plus T H E N E W G E N E R A T I O N O F D I S P E N S E R S
* Aluminium cap: hygienic smooth, resistant anodizing layer, bacteriostatic (owing many years of experience in the choice of material for disinfectant dispensers)
Target groups
• hospitals, health- and nursing institutions
• industrial undertakings and commercial trade
• large kitchens
Housings
• hygienic aluminium housing
• high hygienic standard
• spacious dimensioning
• durable for a high usage frequency
• exchangeable face shield
for individual product labelings
Use
• hygienic operation
• easy and clean filling up of the dispensers
• easy maintenance and cleaning
Operating costs
• no cartridge system
• all common soaps, disinfectants, lotions
• increase of economic efficiency
by the free choice of filling goods
• long standing battery capacity
optimized for professional use
IMPT Touchless
ingo-man® plus
The ingo-man® plus dispenser generation Touchless offers a
streamline-shaped advancement of the manually operated
classical model with proven and interesting new functions:
• increased hygiene standard by touchless disinfection of hands
(magnetic field technology)
• quick change and processing of the stainless steel
pump by simple front withdrawal
• 4-step battery level indicator including automatic signalling for
battery change
• damp-proof electronics
• suitable for nearly all commercially available 1 liter soap- and
disinfectant bottles
• optimized ingo-man® plus bottle gasket
• locking plate as accessory for locking the filling good and
as theft protection
• emergency lever for manual operation in case of empty battery
• proven OPHARDT pump technology
• clean, smooth surfaces due to the proven hygienic material*
ingo-man® plus locking plate IMPT Touchless
including lock and key for 1000 ml IMPT Touchless dispenser
VF T IMPT T A| anodized aluminium, dull silver, with sight window 2400076
ingo-man® plus drip tray IMPT Touchless
for hanging over the dispenser housing with removable plastic dish
SH 4 T IMP| for touchless dispenser IMPT Touchless, 1000 ml 1416600
Type Article description Article-No.
Accessories for ingo-man® plus Touchless
7
Touchless
IMP T touchless| dimensions (approx.) in mm
IMPT Touchless| Touchless soap- and disinfectants dispenser
with a magnetic field technology, battery
operation, emergency lever, easy pump
exchange by front removal, housing made
of anodized aluminium, stainless steel pump,
autoclavable, 1000 ml.
Housing
1000 ml non returnable bottle, also freely fillable
Dosing pump
stainless steel pump IMP 30, bended stainless steel
suction pipe, autoclavable
Filling goods
soap, disinfectants, lotions etc.
Filling quantity, max.
1000 ml
Type Material Article-No.
IMPT Touchless aluminium, silver anodized 1415524
92
330
290
ca. 1
70
210
130
Dosing quantity
approx. 1.5 ml/stroke,
reduceable down to approx. 0.5 ml/stroke
Hologram
certifies the authenticity of this
original OPHARDT branded product.
Bacteriostatic effect
The surface of the ingo-man®
plus dispenser housing made of
anodized aluminium has a
bacteriostatic effect
inhibiting the growth
of germs.
Uniform back panel
The back plates of the new
ingo-man® plus dispenser
series are identical to the back
plates of the ingo-man®
classic series. As these back
plates are often already existing,
an additional mounting expense
can be saved.
Pump IMP T Touchless
Stainless steel pump with bended
stainless steel suction pipe suitable
for liquid soaps without abrasive
agents, alcoholic hand disinfectants,
lotions, massage gels etc., dish-
washer-proof and autoclavable.
Vario-Adapter
The flexible vario adapter
suits to the different bottle
necks and provides an
optimum hold of the
bottle.
A reduction of the air contact with
the medium is reached (semi-closed
system) by the fact that the bottle
opening is covered.
Thus, the risks of germination of the
soap or the evaporation of alcohol
is reduced. The vario-adapter is
dishwasher-proof and can be treated
by the autoclave.
Dosage setting
The dosage quantity can be
adjusted by means of the
dosage block from 0.5
ml up to 1.5 ml per
stroke. Thus an easy
adjustment of the pump
to different media/ viscosities
is possible.
.
Exchangeable pump
Simply remove the pump out of the dispenser.
Put in the new pump. It is not necessary to remove
the dispenser from the wall!
Prior to each bottle exchange it is recommended for
hygienic reasons to clean the dispenser pumps and to
treat them by the autoclave.
TouchlessBacteriostatic effect
ingo-man®
dispenser housing made of
anodized aluminium has a
8
Batteries
ingo-man® plus T H E N E W G E N E R A T I O N O F D I S P E N S E R S
ingo-man® plusTHE NEW INGO-MAN® GENERATION
The new ingo-man® plus design dispenser product line:
The new design of the ingo-man® plus dispenser product line
brings a new drive and – upon request – the dull routine of
every day life on a hospital station can
be refreshed with colours.
The conventional design with a
dull silver anodized aluminium casing
has a bacteriostatic effect.
Thus, the growth of germs on this
surface is inhibited. The most
dispensers can be supplied upon
request powder coated in many
RAL-colours (not autoclavable).
9
* Aluminium cap: hygienic smooth, resistant anodizing layer, bacteriostatic (owing many years of experience in the choice of material for disinfectant dispensers)
Target groups
• hospitals, health- and nursing institutions
• industrial undertakings and commercial trade
• large kitchens
Housings
• hygienic aluminium housing
• high hygienic standard
• spacious dimensioning
• durable for a high usage frequency
• exchangeable face shield
for individual product labelings
Use
• hygienic operation
• easy and clean filling up of the dispensers
• easy maintenance and cleaning
Operating costs
• no cartridge system
• all common soaps, disinfectants, lotions
• increase of economic efficiency
by the free choice of filling goods
• long standing battery capacity
optimized for professional use
Hologram
certifies the authenticity of this
original OPHARDT branded product.
Bacteriostatic effect
The surface of the ingo-man®
dispenser housing made of ano-
dized aluminium has a bacterio-
static effect inhibiting the growth
of bacteria.
Uniform back plate
The back plate of the new
ingo-man® plus dispenser
series are identique with the
back plates of the ingo-man®
classic series.
IMP series 30
Stainless steel pump with bended
stainless steel suction pipe suitable for liquid
soaps without abrasives, alcoholic hand
disinfectants, lotions, massage gels etc.,
dishwasher-proof and autoclavable.
Vario adapter
The flexible vario adapter
adjusts to the different
bottlenecks and ensures
an optimal hold of the
bottle in the dispenser.
A reduction of the air contact with
the medium is reached (semi-closed
system) by the fact that the bottle
opening is covered.
Thus the risks of germination of the
soap or the evaporation of alcohol is
reduced. The vario adapter is
dishwasher-proof and
autoclavable.
Dosage adjustment
The dosing quantity can be
regulated by means of
the dosing block from
0.5 ml up to 1.5 ml per
stroke. Thus, an easy
adjustment of the pump
to different media/
viscosities is possible.
Exchangeable pump
For changing the pump remove it out of
the dispenser from the front. Replace the
pump vice versa.
It is not necessary to remove the dis-
penser from the wall!
For reasons of hygiene it is recom-
mended to clean the dispenser pumps
and treat them by autoclave prior to
each bottle change.
10
11 ingo-man® plus T H E N E W G E N E R A T I O N O F D I S P E N S E R S
ingo-man® plus
THE NEW INGO-MAN® GENERATION
The ingo-man® plus dispenser generation offers a streamline-
shaped advancement of the classical model with proved and
interesting new functions:
• The exchangeable stainless steel pump can rapidly be replaced and
processed by easy front removal.
Thus the new ingo-man® plus dispenser contributes
to an improvement of the hygienic conditions.
• Ophardt ingo-man® dispensers with stainless steel pump are dishwasher-
proof and autoclavable.
• The high quality and the longevity of the ingo-man® dispensers are based
upon the use of high-quality materials and its special processing.
• Exchangeable faceshields offer a simple and hygienic possibility for
individual product labelings.
• A long stainless steel operating lever ensures the comfortable and hygienic
operation of the dispenser by elbow.
Easy front removal
12
IMP VS| locking plate
locking plate for manually operatated
dispensers incl. lock and key
Sizes
VF IMP ELSA for 500 ml dispenser,
VF IMP TLSA for 1000 ml dispenser
Place of application
conventional
Intended use
protection of the filling good and the dispenser
against theft
Type Material Article No.
VF IMP ELSA anodized aluminium, 2400067 dull silver, with window
VF IMP TLSA anodized aluminium, 2400064 dull silver, with window
Pump series 30| stainless steel pump with bended stainless steel
suction pipe, suitable for liquid soaps without
abrasives, alcoholic hand disinfectants, lotions,
massage oils etc., dishwasher-proof and auto-
clavable.
Dosage
3 dosage quantities can be adjusted
(max, 1.5 ml/stroke)
Place of application
conventional
Intended use
dosage of liquid soaps without abrasive agents,
alcoholic hand disinfectants, lotions, massage
oils, etc.
Type Material Article No.
pump stainless steel pump 1416015ELS 30 for 500 ml dispenser
pump stainless steel pump 1415843TLS 30 for 1000 ml dispenser
IMP ELS - IMP TLS| dimensions (approx.) in mm
IMP ELS/ TLS| for disinfectants, lotions and liquid soaps,
dispenser autoclavable, long operating lever for
elbow operation made of stainless steel,
exchangeable stainless steel pump, 3 dosage
rates can be adjusted (max. 1.5 ml/stroke), for
500 or 1000 ml disposable bottles, wall plate
incl. mounting kit, with empty bottle
Dosage pump
IMP 30 stainless steel pump, bended stainless
steel suction pipe, autoclavable, each with stain-
less steel pump cylinder
Dosage rate
approx. 1.5 ml/stroke, can be reduced down to
approx. 0,5 ml/stroke
Operating lever
stainless steel
Type Material Article No.
IMP ELS A/30 aluminium, dull silver 1416000 anodized, 500 ml
IMP ELS E/30 stainless steel, brushed, 1416017 500 ml
IMP TLS A/30 aluminium, dull silver 1415993 anodized, 1000 ml
IMP TLS E/30 stainless steel, brushed, 1415995 1000 ml
245
82
203
169
245
40
290
40
290
92
ca. 5
0ca
. 170
ca. 5
0ca
. 130
82
90
215
225
5051
ingo-man® classic T H E N E W G E N E R A T I O N O F D I S P E N S E R S13
DISCOVER THE DIFFERENCE
Say goodbye to the rigid systems and construct
your own individual dispenser solution.
No other dispenser system in the hospital is such flexible as the
original ingo-man® series of Ophardt. Out of individual modules
of the most different dispenser housings and dispenser pumps you
assemble your desired soap and disinfectant dispenser together.
You want to replace a stainless steel pump by a plastic pump or
you want to use another filling material ? Just only remove the
dispenser from the wall, withdraw the pump out of the dispenser
and insert the new pump. – That’s all!
ingo-man® classic
Target groups
• hospitals, health- and nursing institutions
• industrial undertakings and commercial trade
• large kitchens
Housings
• hygienic aluminium housing
• high-grade stainless steel
• high hygienic standard
• autoclavable or dishwasher-proof
• spacious dimensioning
• durable for a high usage frequency
Use
• hygienic operation
• easy and clean filling up of the dispensers
maintenance-free, easy to clean
Operating costs
• product-independant dispensers where all common soaps,
disinfectants, lotions or paper towels respectively can be
used
• no cartridge system
• increase of economic efficiency by the free choice of filling
goods
* Aluminium cap: hygienic smooth, resistant anodizing layer, bacteriostatic (owing many years of experience in the choice of material for disinfectant dispensers)
E/ T/ ELS/ TLS| for disinfectants, lotions and liquid soaps,
dispenser autoclavable, operating lever made of
stainless steel, exchangeable pumps, 3 dosage
rates can be adjusted (max. 1.5 ml/stroke), for
500 or 1000 ml non returnable bottles, back
plates incl. mounting kit, with empty bottles
Dosage pump (optional)
see survey on page 17-18
Dosage rate
approx. 1.5 ml/stroke, reduceable down to ap-
prox. 0.75 ml/stroke
Operating lever
stainless steel
14
pump K
plastic pump
Changeable pumps
Stainless steel operation lever
owing to the small contact surface, the hygienic elbow operation and the additional anti-micro-
bial coating the risk of contamination is minimized.
Cleaning and sterilization In order to remove dirt the entire dispenser can be cleaned in a conventional dishwasher. In addition the ingo-man® dispensers made of aluminium and stainless steel as well as pumps made of stainless steel can be treated by autoclave at 134 °C during 20 min. / 3 bar.
Dosage adjustment
The dosage rate can be ad-justed via the dosage block of 0.75 ml up to 1.5 ml/stroke. Thus an easy adaptation of the pump to the different
media/ viscosities is possible (exception: foam pump).
Exchangeable pumps
For an exchange of the pump remove it back-wards out of the dispenser. Insert the pump vice versa.
It is recommended prior to each change of bottle to clean the dispenser pumps and to treat them by autoclave or in the dishwasher.
Types
see examples on page 15-16
pump 28
stainless steel pump with flexible suction pipe
pump 24
stainless steel pump with bended suction pipe
pump 25
stainless steel pump with straight suction pipe
pump KSP
spray pump for disinfectants
pump F
foam pump for foam soaps
ingo-man® classic D I S P E N S E R W I T H E XC H A N G E A B L E S TA I N L E S S S T E E L P U M P S E R I E S 2 615
ELS| dimensions (approx.) in mm ELS X| dimensions (approx.) in mm
E| soap-, disinfectant -and lotion dispenser,
short stainless steel operating lever for opera-
tion by ball of the thumb, with exchangeable
pump, 500 ml, modular system, dishwasher-
proof and autoclavable
ELS| soap-, disinfectant- and lotion dispenser,
long stainless steel operating lever for elbow
operation, with exchangeable pump, 500
ml, modular system, dishwasher-proof and
autoclavable
ELS X| Soap-, disinfectant- and lotion dispenser,
extra long stainless steel operating lever for
elbow operation, with exchangeble pump,
500 ml, modular system, dishwasher-proof
and autoclavable
Dosage pump (as desired)
see overall view on page 17-18
Filling volume
500 ml disposable bottle, also freely fillable
Operating lever
stainless steel for operation by ball of the thumb,
short type
Optional accessories
see overall view on page 20-22
Type Material Article No.
E 26 A housing aluminium 1220100 silver anodized, pump 25
E 26 P housing aluminium, white 1397900 powder coated (RAL 9010), pump 25
E 26 E housing stainless steel, 1410817 ground, pump 25
E 26 EE housing and back plate 1411013 stainless steel, pump 25
Type Material Article No.
ELS 26 A housing aluminium 1115400 silver anodized, pump 25
ELS 26 P housing aluminium, white 1399100 powder coated (RAL 9010), pump 25
ELS 26 E housing stainless steel, 1124100 ground, pump 25
ELS 26 EE housing and back plate 1410821 stainless steel, pump 25
Type Material Article No.
ELSX 26 A housing aluminium 1411024 silver anodized, pump 25
ELSX 26 P housing aluminium, white 1413487 powder coated (RAL 9010), pump 25
ELSX 26 E housing stainless steel, 1415987 ground, pump 25
ELSX 26 EE housing and back plate 1416735 stainless steel, pump 25
E 26| dimensions (approx.) in mm
Dosage pump (as desired)
see overall view on page 17-18
Filling volume
500 ml disposable bottle, also freely fillable
Operating lever
stainless steel for elbow operation,
long type
Optional accessories
see overall view on page 20-22
Dosage pump (as desired)
see overall view on page 17-18
Filling volume
500 ml disposable bottle, also freely fillable
Operating lever
stainless steel for elbow operation,
extra long type
Optional accessories
see overall view on page 20-22
82 82
162162
pump 24pump 25or plastic pump
ca. 2
73
51
ca. 3
024
3ca
. 120
ca. 3
024
3ca
. 150
169
82 40
82
225
pump 24pump 25or plastic pump
ca. 2
83
51
ca. 4
024
3ca
. 120
ca. 4
024
3ca
. 150
169
82
82
225
82
320
pump 24pump 25or plastic pump
ca. 2
83
51
ca. 4
024
3ca
. 120
ca. 4
024
3ca
. 150
169
82
82
320 4040
16
TLS XS| dimensions (approx.) in mm
T| soap-, disinfectant- and lotion dispenser,
short stainless steel operating lever for opera-
tion by ball of the thumb, with exchangeable
pump, 1000 ml, modular system, dishwas-
her-proof and autoclavable
TLS| Soap-, disinfectant- and lotion dispenser,
long stainless steel operating lever for elbow-
operation, with exchangeable pump,
1000 ml, modular system, dishwasher-proof
and autoclavable
TLS X| Soap-, disinfectant- and lotion dispenser,
extra long stainless steel operating lever for
elbow operation, with exchangeble pump,
1000 ml, modular system, dishwasher-proof
and autoclavable
TLS| dimensions (approx.) in mm
Type Material Article No.
T 26 A housing aluminium 1220900 silver anodized, pump 25
T 26 P housing aluminium, white 1398200 powder coated (RAL 9010), pump 25
T 26 E housing stainless steel, 1408600 ground, pump 25
T 26 EE housing and back plate 1410985 stainless steel, pump 25
Type Material Article No.
TLS 26 A housing aluminium 1005100 silver anodized, pump 25
TLS 26 P housing aluminium, white 1398800 powder coated (RAL 9010), pump 25
TLS 26 E housing stainless steel, 1123600 ground, pump 25
TLS 26 EE housing and back plate 1410968 stainless steel, pump 25
Type Material Article No.
T LSX 26 A housing aluminium 1410864 silver anodized, pump 25
TLSX 26 P housing aluminium, white 1414545 powder coated (RAL 9010), pump 25
TLSX 26 E housing stainless steel, 1415342 ground, pump 25
TLSX 26 EE housing and back plate 1416735 stainless steel, pump 25
T| dimensions (approx.) in mm
Dosage pump (as desired)
see overall view on page 17-18
Filling volume
1000 ml disposable bottle, also freely fillable
Operating lever
stainless steel for operation by ball of the thumb,
short type
Optional accessories
see overall view on page 20-22
Dosage pump (as desired)
see overall view on page 17-18
Filling volume
1000 ml disposable bottle, also freely fillable
Operating lever
stainless steel for elbow operation,
long type
Optional accessories
see overall view on page 20-22
Dosage pump (as desired)
see overall view on page 17-18
Filling volume
1000 ml disposable bottle, also freely fillable
Operating lever
stainless steel for elbow operation,
extra long type
Optional accessories
see overall view on page 20-22
pump 24pump 25or plastic pump
ca. 3
17
94
287
ca. 2
00ca
. 30
287
ca. 1
50ca
. 30
5120
3
401629292
162
pump 24pump 25or plastic pump
ca. 3
27
94
287
ca. 2
00ca
. 40
287
ca. 1
50ca
. 40
5120
3
402259292
225
pump 24pump 25or plastic pump
ca. 3
27
94
287
ca. 2
00ca
. 40
287
ca. 1
50ca
. 40
5120
3
403209292
320
ingo-man® classic P U M P S E R I E S 2 617
Pump series 28|
Pump series 24| High-quality dispenser pump (changeable)
for the dosage of soaps, disinfectants, lotions
etc. Suitable for universal use and for special
applications. Designed for 500 ml or 1000 ml
as well as for short lever and long lever
versions, dishwasher-proof and autoclavable
Pump series 25| High-quality dispenser pump (changeable)
for the dosage of soaps, disinfectants, lotions
etc. Suitable for universal use and for special
applications. Designed for 500 ml or 1000 ml
as well as for short lever and long lever
versions, dishwasher-proof and autoclavable
Dosage
3 dosage rates adjustable (max. 1.5 ml/stroke)
Place of application
Standard
Intended use
Dosage of liquid soaps without abrasive agents,
alcoholic hand disinfectants, lotions, massage
oils etc.
Type Material
Type 25 stainless steel pump, with straight suction pipe, autoclavable
Pump series 28| High-quality dispenser pump (changeable)
for the dosage of soaps, disinfectants, lotions
etc. Suitable for universal use and for special
applications. Designed for 500 ml or 1000 ml
as well as for short lever and long lever
versions, dishwasher-proof and autoclavable
Pump series 25|
Dosage
3 dosing rates ajustable( max. 1.5 ml/stroke)
Place of application
in case of lack of space below the dispenser (bott-
le change)
Intended use
Dosage of liquid soaps without abrasive agents,
alcoholic hand disinfectants, lotions, massage
oils etc.
Type Material
Type 24 stainless steel pump, with suction pipe
bent at right angles, autoclavable
Dosage
3 dosage rates adjustable (max. 1.5 ml/stroke
Place of application
in case of lack of space below the dispenser (bottle
change) a low-priced stainless steel alternative
Intended use
Dosage of liquid soaps without abrasive agents,
alcoholic hand disinfectants, lotions, massage
oils etc.
Type Material
Type 28 stainless steel pump with flexible
suction pipe, autoclavable
Pump series 24|
18
K pump| High-quality dispenser pump (changeable)
for the dosage of soaps, disinfectants, lotions
etc. All-purpose use and suitable for special
ranges of application for 500 ml or 1000 ml
as well as for short lever or long
lever version, dishwasher-proof
F pump| High-quality dispenser pump (changeable) for
the dosage of foam soaps, all-purpose use
and suitable for special applications for
500 ml or 1000 ml as well as for short lever-
and long lever versions, dishwasher-proof
KSP pump| High-quality dispenser pump (changeable) for
the vaporisation of alcoholic disinfectants for
500 ml or 1000 ml units as well as for short
lever or long lever versions,
dishwasher-proof
Dosage
3 dosing rates adjustable, (max. 0.7 ml/stroke)
Place of application
standard
Intended use
dosage of foam soaps
Type Material
Type F plastic pump with foam, generator, dishwasher-proof
Dosage
3 dosing rates adjustable, (max. 1.5 ml/stroke)
Place of application
standard
Intended use
Dosage of liquid soaps without abrasive agents,
alcoholic hand disinfectants, lotions, massage
oils etc.
Type Material
Type K plastic pump, dishwasher-proof
Dosage
3 dosing rates adjustable (max. 1.5 ml/stroke
Place of application
standard
Intended use
spraying of alcoholic hand disinfectants
Type Material
Type KSP plastic spray pump, dishwasher-proof
KSP pump| F pump|K pump|
ingo-man® classic D I S P E N S E R S A N D A C C E S S O R I E S19
LCP VS|locking plate locking plate for LCP plastic dispensers incl.
lock and key, transparent clear
Lock
lock with metal key
Type Material Article No.
LCP VS E plastic transparent clear 1416315 for 500 ml LCP dispenser
LCP VS T plastic transparent clear 1416316
for 1000 ml LCP dispenser
LCP VS| dimensions (approx.) in mm-
TFS 24| soap-, disinfectant- and lotion dispenser, foot
pedal operation, pedal made of stainless steel
with Bowden cable, 1000 ml, pump with suction
pipe bent at right angles, dishwasher-proof and
autoclavable
Type Material Article No.
TFS 24 A housing aluminium, 214300 silver anodized
TFS 24| dimensions (approx.) in mm
mounting plate
401539492
203
LCP| soap- and disinfectant dispenser with plastic
housing, operating lever made of stainless steel,
exchangeable plastic pump, ingo-man back plate
series 26 for disposable bottles as well as freely
fillable, suitable for liquid soap without abrasive
agents, alcoholic hand disinfectants
LCP|
Dosing pump
plastic pump for soaps, disinfectants and lotions,
stroke quantity adjustable, dishwasher-proof
Filling quantity
LCP E: 500 ml disposable bottle, also freely fillable
LCP T: 1000 ml disposable bottle, also freely fillable
Operating lever
stainless steel for elbow operation
long execution
Optional accessories
plastic locking plate, transparent clear with lock, drip
tray, angle plate, adapter plates with tubular frame
holder for front removal or for Dräger rail, interchan-
geable pumps
Type Material Article No.
LCP E plastic housing, white, 1413675 stainless steel, 500 ml
LCP T plastic housing, white, 1413955
stainless steel, 1000 ml
Dosing pump
stainless steel pump, series 24 for soaps,
disinfectants and lotions, stroke quantity
adjustable, incorporated
Filling quantity
1000 ml disposable bottle, also freely fillable
Operating lever
pedal stainless steel with Bowden cable
Optional accessories
locking plate with lock, angle plate, HDPE bottle
100
240
Intended use
protection against theft of the filling good and
the dispenser
20
SH 26| dimensions (approx.) in mm
VS - VF|locking plate locking plate for series 26 incl. lock and key
Type Material Article No.
VS E26 A anodized aluminium, dull 292501 silver with visual slot, 500 ml
VF E26 A anodized aluminium, dull 292504
silver with visual window, 500 ml
VS E26 P white powder coated alu- 1157000
minium, visual slot, 500 ml
VS E26 E stainless steel, ground, 662300 visual slot, 500 ml
VS T26 A anodized aluminium, dull 220900
silver visual slot, 1000 ml
VF T26 A anodized aluminium, dull 544002
silver with visual window, 1000 ml
VS T26 P white powder coated alu- 949000
minium, visual slot, 1000 ml
VS T26 E stainless steel, ground, 310000
visual slot, 1000 ml
SH| Drip tray universal for wall mounting,
stainless steel lever with shackle for wall
fixing incl. removable plastic dish with
securing bracket
Type Material Article No.
SH 1 for wall mounting, the short 290000 side towards the wall
SH 3 for wall mounting, the long 1165200
side towards the wall
SH 26| Drip tray for series 26, for hanging up
above the dispenser housing, stainless steel
with removable plastic dish and securing
bracket
Type Material Article No.
SH E26 for 500 ml dispenser for 263800 hanging up above the housing
SH T26 for 1000 ml dispenser for 161100
hanging up above the housing
SH 1 - SH 3| dimensions (approx.) in mmVS VF| dimensions (approx.) in mm
90 90 70,5
220,
5
75 263
150
50 90
190
96
25
95
25
360
150 260
95
Intended use
Protection against theft of the filling good and
the dispenser
Intended use
prevents the dripping of the disinfectant off the
hand onto the floor
Intended use
prevents the dripping of the disinfectant off the
hand onto the floor
WH E|adapter bracket stainless steel wall plate made of stainless steel for dispensers
with stainless steel housing, series 26
ingo-man® classic W A L L H O L D E R S21
WH E26E - WH T26 E| dimensions (approx.) in mm
Type Material Article No.
WH E26 E for 500 ml dispenser 384100 with stainless steel housing
WH T26 E for 1000 ml dispenser 212600 with stainless steel housing
WH F|adapter bracket for front removal
adapter bracket made of stainless steel for dis-
pensers of the series 26 with aluminium housing
for front side removal of the dispenser from the
wall
Type Material Article No.
WH FE for 500 ml dispenser 1414938 with aluminium housing
WH FT for 1000 ml dispenser 1414940
with aluminium housing
WH FE - WH FT| dimensions (approx.) in mm
90
280
77
238
90
285
80
242
Intended use
fixing of the dispenser in strongly stressed
areas
Intended use
for bottle change in the dispenser with minimum
space requirement
WH 10 - WH 25| dimensions (approx.) in mm
WH| wall holder
wall holder for receptacles with BPC- or BPK-sub-
mersible pumps, made of ground stainless steel
Type Material Article No.
WH 10 E stainless steel, ground, 1415103 for 1000 ml receptacle
WH 25 E stainless steel, ground, 1415104
for 2500 ml receptacle
80255
77125
235153
91200
5091
75127
22
WP EA - WP TA| dimensions (approx.) in mm
WH R|tubular frame holder, round adapter bracket made of stainless steel for dis-
pensers of the series 26 with aluminium housing
for fixing the dispenser on beds in hospitals, ward
wagons etc., with holding device for round tubu-
lar frames.
Type Material Article No.
WH RE for 500 ml dispenser 1414936 with aluminium housing
WH RT for 1000 ml dispenser 1414934
with aluminium housing
WH D|Dräger rail holder adapter bracket made of stainless steel for dispen-
sers of the series 26 with aluminium housing for
fixing the dispenser at a Dräger rail
Type Material Article No.
WH DE for 500 ml dispenser 1414932 with aluminium housing
WH DT for 1000 ml dispenser 1414930
with aluminium housing
WP|angle plate
angle plate made of aluminium for fixing the
dispensers of the series 26 parallel to the wall
Type Material Article No.
WP E A for 500 ml dispenser 290100 with back plate
WP T A for 1000 ml dispenser 290200
with back plate
WH RE - WH RT| dimensions (approx.) in mm WH DE - WH DT| dimensions (approx.) in mm
115240
245
290
127240
90
282
78
238
90
282
78
236
9090
Intended use
fixing of the dispenser at the hospital bed or the
station waggon
Intended use
fixing the dispenser on a Dräger rail
Intended use
fixing of the dispenser in small passages
ingo-man® classic P A P E R T O W E L D I S P E N S E R S23
HS 31| dimensions (approx.) in mm SHS 1| dimensions (approx.) in mmHS 15| dimensions (approx.) in mm
HS 15|ingo-man towel dispenser for paper towels in
C- and Z-folding are specially designed for high
hygienic requirements. The stainless steel and an-
odized aluminium surfaces have a bacteriostatic
effect and are easy to clean. The paper removal is
designed comfortable and reliable.
The dispensers of the design aluminium anodized
and aluminium white coated are equipped with
a snap lock which can be actuated, if required,
with or without key. The stainless steel dispenser
has only a bolting lock. For filling the dispenser
the front door of the dispenser is flapped towards
the bottom.
Filling quantity
approx. 300 sheets of standard paper in C- or
Z-folding
Paper removal
synthetics with adjusting stair and generously
rounded edges
Type Material Article No.
HS 15 A aluminium, 801400 silver anodized
HS 15 P aluminium, 801500
white powder coated
HS 15 EE stainless steel , 152100
ground
HS 31| ingo-man towel dispenser for paper towels in
C- and Z-folding are specially designed for high
hygienic requirements. The stainless steel and an-
odized aluminium surfaces have a bacteriostatic
effect and are easy to clean. The paper removal is
designed comfortable and reliable.
The dispensers of the design aluminium anodized
and aluminium white coated are equipped with
a snap lock which can be actuated, if required,
with or without key. The stainless steel dispenser
has only a bolting lock. For filling the dispenser
the front door of the dispenser is flapped towards
the bottom.
Type Material Article No.
HS 31 A aluminium, 778900 silver anodized
HS 31 P aluminium, 779000
white powder coated
HS 31 EE stainless steel , 297100
ground
SHS| sterile towel dispenser
The ingo-man SHS sterile towel dispenser
has been specially developed for the me-
dical area. The stainless steel surface has a
bacteriostatic effect and is easy to clean. For
filling the dispenser the snap lock is opened
by means of a press button and the front
door of the dispenser is flapped towards the
bottom.
Type Material Article No.
SHS 1 stainless steel 964800
170,
54,
571
90
185
126
275 130
HS 15 A
drill pattern
257
HS 15 P
280 drill pattern
230
HS 15 EE
275 130
HS 31 A · HS 31 Pdrill pattern
257
450
295
355
7126
04,
534
0,5
HS 31 EEdrill pattern
230
273
310
142,5 153
107,
524
0
153
40
mounting plate
Filling quantity
approx. 750 sheets of standard paper in C- or
Z-folding
Paper removal
synthetics, with adjusting stair and generously
rounded edges
Filling quantity
differs according to the type of towel
Paper removal
stainless steel
Place of application
operating theatre/ room
24
HS 3| ingo-man towel dispenser for paper towels in
C- and Z-folding are specially designed for high
hygienic requirements. The ano-dized aluminium
surface has a bacteriostatic effect and is easy to
clean. The paper removal is comfortable and safe.
The dispenser is only provided with a bolting lock.
For the filling the transparent front door of the
dispenser is flapped towards the bottom.
Type Material Article No.
HS 3 A aluminium silver anodized, 850400 door made of transparent synthetics
HS 3| dimensions (approx.) in mm
275 257
HS 3 Adrill pattern
130
450
355
295
4,5
340,
5
Filling quantity
approx. 750 sheets of standard paper in C- or-Z-
folding
Paper removal
synthetics with adjusting stair and generously
rounded edges
W A S T E B I N S ingo-man®
Place of application
wash stand
AB 6 - AB 15 - AB 36| dimensions (approx.) in mm
AB| waste bin
closed waste bin made of silver anodized alu-minium, with hinged cover and polyester bag safeguarding. Stand-alone model and suitable for wall mounting, with removable mounting plate, on request with a foot pedal
Type Material Article No.
AB 6 A aluminium silver anodized, 231000 content 6 l
AB 6 P aluminium white powder 231600
coated, content 6 l
AB 6 E stainless steel, gound, 285100 content 6 l
AB 15 A aluminium silver anodized, 287300
content 15 l
AB 15 P aluminium white powder 287400
coated, content 15 l
AB 15 E stainless steel, gound, 484500 content 15 l
AB 36 A aluminium silver anodized, 288200
content 36 l
ABF foot pedal 1410911
for AB 15 and AB 36
215
mounting plate
mounting plate
155 90
320 190 177
400 255 177
272
7727
215
9
170
77,5
410
485
300
SK 18 • SK 26 • SK 60| dimensions (approx.) in mm
SK/ CB| waste bin
ideal as supplement to the paper towel dispen-sers, stand-alone and suitable for wall mounting
Type Material Article No.
SK 18 P steel wire, white coated, 795100 content 18 l
SK 26 P steel wire, white coated, 966100 content 26 l
SK 26 E stainless steel, polished, 376700 content 26 l
SK 60 P steel wire, white coated, 705100 content 60 l
SK 60 E stainless steel, polished, 705200 content 60 l
CB 60 E stainless steel, polished, 966000 (collapsible) 60 l
302
270400
195305207
153
630
306
446
471
drill pattern
Place of application
wash stand
Intended use
waste disposal
mounting plate
ingo-man® classic W A S T E B I N S25
AB 6 HB 2| dimensions (approx.) in mmAB 6 HB 1| dimensions (approx.) in mm
AB 6 HB 1| Hygienic waste bin
closed bin with mounted hygiene bag dispenser for paper bags, for the hygienic disposal of sa-nitary towels, hinged cover, polyester bag fixing. Wall mounting with detachable wall holder
Type Material Article No.
AB 6HB1A aluminium silver anodized, 232500 content 6 l
AB 6HB1P aluminium, white powder 232600 coated, content 6 l
AB 6HB1E stainless steel, ground, 284700 content 6 l
AB 6 HB 2| Hygienic waste bin
closed bin with mounted hygiene bag dispenser for poly bags, for the hygienic disposal of sani-tary towels, hinged cover, polyester bag fixing. Wall mounting with detachable wall holder
Type Material Article No.
AB 6HB2A aluminium silver anodized, 1415091 content 6 l
AB 6HB2P aluminium, white powder 1415092 coated, content 6 l
AB 6HB2E stainless steel, ground, 1415093 content 6 l
215
mounting plate
90170
300
7917
0
HB 1| dimensions (approx.) in mm
HB 1| Hygienic bag dispenser
Dispenser for hygiene bags made of paper as sup-
plement to the waste bins without integrated dis-
penser in ladies’ toilets
Type Material Article No.
HB 1 A aluminium silver anodized, 311500 content approx. 50 paper bags
HB 1 P aluminium, white powder 1120700
coated, approx. 50 paper bags
HB 1 E stainless steel, ground, 798500
content approx. 50 paper bags
90
mounting plate
215 155
300
77,5
170
13030
2823
2
275
drill pattern
Place of application
ladies’ toilet
Intended use
disposal of sanitary towels
Place of application
ladies’ toilet
Intended use
disposal of sanitary towels
Place of application
ladies’ toilet
Intended use
disposal of sanitary towels
26B U I L T - I N D I S P E N S E R S ingo-man® classic
G 23| dimensions (approx.) in mm
G 23| Soap dispenser compact
for refilling, for the dosage of liquid soaps without abrasive agents, alcoholic disinfectants, washing-up liquids, lotions etc., made of aluminium, stain-less steel pump, dosage quantity approx, 1.5 ml/ stroke, reducable down to 0,5 ml/stroke, stainless steel operating lever, refill receptacle made of glass, with holder for wall mounting, 250 ml
Type Material Article No.
G 23 A aluminium, silver anodized 271200 eloxiert, content 250 ml
G 23 P aluminium, white coated 870700 content 250 ml
HB 2| dimensions (approx.) in mm
HB 2| Hygiene bag dispenser
Dispenser for hygiene bags made of synthe-
tics as supplement to the waste boxes
without integrated dispenser in ladies’ toilets
Type Material Article No.
HB 2 P aluminium, white powder 1412012 coated, approx. 25 polyester bags
HB 2 E stainless steel, ground, 1412013 content approx. 25 polyester bags
WTT| dimensions (approx.) in mm
WTT| built-in dispenser
Soap dispenser for incorporation into the wash-
stand, for refilling from above and from below.
For the dosage of liquid soaps, alcoholic disin-
fectants, washing-up liquids, lotions etc., plastic
pump, dosing amount approx. 1.5 ml/stroke,
round stainless steel outlet tube incl. HDPE refill
bottle
Filling amount
1000 ml
Operating lever
stainless steel press button for operation by ball
of the thumb
Type Material Article No.
WTT 12 stainless steel, ground, 297700 length approx. 120 mm
WTT 17 stainless steel, ground, 317100 length approx. 170 mm
153drill pattern
Ø 32
up to 40 mm
122
Ø 25,5
8872
349
75
6533
8
91
136
24
170
Place of application
ladies’ toilet
Intended use
disposal of sanitary towels
Place of application
built-in washstand
Dosing pump
stainless steel with straight suction pipe
Filling amount
250 ml
Operating lever
stainless steel for operation by ball of the thumb
Optional accessories
replacement receptacle (glass)
72 145
166
26drill pattern
mounting plate
102
45
ingo-man® classic A C C E S S O R I E S27
BS| dimensions (approx.) in mm
BS| Brush dispenser
Brush dispenser for the medical area for approx.
10 or more sterilisible hand brushes. With deta-
chable holder for wall mounting, brush dispen-
ser and wall holder are autoclavable.
Filling quantity
approx. 10 and more sterilisable hand brushes
Removal
brushes are removable individually from the front
Type Material Article No.
BS 10 S brush dispenser with wall 965000 holder made of stainless steel
BS 10 D brush dispenser change maga- 965100
zine made of stainless steel
HWB| dimensions (approx.) in mm
HWB| Hand brush
sterilisable hand brush, matching with the
ingo-man brush dispenser BS 10 S and
change magazine BS 10 D with nailbrush
segment
Unit of packing
12 each
Type Material Article No.
HWB PCM brush body 331900 and PA-bristles
BA| dimensions (approx.) in mm
BA| Brush collecting basin
built to take the no longer sterile hand brus-
hes, for wall mounting incl. wall holder, de-
tachable
Type Material Article No.
BA stainless steel 965200
mounting plate
56118 118
12355137
30
360
153
360
mounting plate
262 163 80
155
44,5
50
110
35
44
28
DU 16| dimensions (approx.) in mm
DU 16| Disinfection timer
disinfection clock for use with surgical hand
disinfection. Adjustable 0 – 16 minutes.
Message by acoustic signal
Type Material Article No.
DU 16 E stainless steel 964900
UHS| dimensions (approx.) in mm
UHS| Gloves dispenser
holding system for examination gloves. For
many current package sizes. For wall moun-
ting or tubular frame fixing.
Type Material Article No.
UHS stainless steel 1413316
RRH mounting set for 1413329
tubular frame fixing
ingo-ped 2| dimensions (approx.) in mm
ingo-ped®| Foot sprayer
„Foot shower“ according to the directives
of work places 35/1-4 subparagraph 5.12.
Dispenser with two spraying nozzles for disin-
fectants on an alcoholic basis. Mechanical
operation via foot pedal. Upper part of the
casing made of cast aluminium, white pow-
der coated (RAL 9010). Lower part of the
housing made of silver anodized aluminium.
Refillable 7.5 l receptacle. To be mounted
with appropriate wall plate.
Content
7.5 l foot dinsinfectant on the basis of alcohol
Operation
mechanically via foot pedal
Type Material Article No.
ped 2 aluminium 254900
224 406
80
388
143,
555
85
150
255
6071
,5
131,
5
91
130
64
1528
87
ingo-man® classic I N D U S T R I A L D I S P E N S E R S29
TW 23| dimensions (approx.) in mm
TCV 2| Dispenser for the dosage of highly viscous hand
cleaners with abrasive agents, liquid soaps, free-
flowing pastes etc. Housing and locking plate
made of silver anodized aluminium. Short
stainless steel operating lever. Pump made of
stainless steel. Back plate made of synthetic
material. Further accessories: an empty HDPE
bottle (large opening for refilling) and a white
labeling clip. Amount of stroke 2.3 ml/stroke
reduceable in 2 stages.
Dosing pump
stainless steel with straight suction pipe
Filling quantity
1000 ml
Operating lever
stainless steel for operation by ball of the thumb,
short type
Optional accessories
angular plate, dispoable bottles, screw cap
Type Material Article No.
TCV 2 A aluminium, 221800 silver anodized
ZCV 23| Dispenser for the dosage of highly viscous hand
cleaners with abrasive agents, liquid soaps,
free-flowing pastes etc. Housing and locking
plate made of silver anodized aluminium. Short
stainless steel operating lever. Pump made of
stainless steel. Back plate made of synthetic
material. Further accessories: an empty HDPE
bottle (large opening for refilling) and a white
labeling clip. Amount of stroke 5.7 ml/stroke,
reduceable in 2 stages.
Type Material Article No.
ZCV 23 A aluminium, 209200 silver anodized
TV 23| Dispenser for the dosage of liquid and cre-
amy soaps, lotions, washing-up liquids etc.,
housing and locking plate made of silver
anodized aluminium, stainless steel pump,
dosage quantity approx. 1.5 ml/stroke,
reduceable in 2 stages. Short stainless steel
operating lever, back plate made of synthetic
material, together with an empty HDPE-
bottle (large opening for refilling) and a
white labeling clip.
Type Material Article No.
TV 23 A aluminium, 289400 silver anodized
TCV 2| dimensions (approx.) in mm ZCV 23| dimensions (approx.) in mm
94 162 40
92
mounting plate
317
287
ca. 2
50ca
. 40
203
51
17
94 213 44
141
44mounting plate
424
384
ca. 2
50ca
. 40
268
4827
4814
203
325
290
ca. 1
50ca
. 35
mounting plate
16294
92
Dosing pump
stainless steel with straight suction pipe
Filling quantity
2500 ml
Operating lever
stainless steel for operation by ball of the thumb,
short type
Optional accessories
dispoable bottles, screw cap
Dosing pump
stainless steel with straight suction pipe
Filling quantity
1000 ml
Operating lever
stainless steel for operation by ball of the thumb,
short type
Optional accessories
angular plate, dispoable bottles, screw cap
BPC 10 • 25/100| dimensions (approx.) in mm
BPC| Submersible pump
submersible pump for viscous liquids with
abrasive agents. For screwing on to the
1000 ml or 2500 ml refilling receptacle as
well as on to 10 l tins. Dosing amount ap-
prox. 2.4 ml per stroke
Dosing pump
stainless steel
Type Material Article No.
BPC 10 stainless steel / synthetics 674900 for 1000 ml receptacle
BPC 25 stainless steel / synthetics 286300 for 2500 ml receptacle
BPC 100 stainless steel / synthetics 963400 for 10 l tin
BPK 10 • 25/100| dimensions (approx.) in mm
BPK| Submersible pump
submersible pump for viscous liquids for
screwing on to 1000 ml or 2500 ml refill
receptacles as well as to 10 l tins. Dosing
amount approx. 5.0 ml/stroke
Dosing pump
stainless steel/ synthetics
Type Material Article No.
BPK 10 stainless steel / synthetics 218400 for 1000 ml receptacle
BPK 25 stainless steel / synthetics 218200 for 2500 ml receptacle
BPK 100 stainless steel / synthetics 305800 for 10 l tin
30S U B M E R S I B L E P U M P S ingo-man®27
7
367 31
2
398
Ø 57Ø 38
110Ø 57110Ø 38174 174
ingo-man BPC 10 ingo-man BPC 25/100 ingo-man BPK 10 ingo-man BPK 25/100
OP| Bottles
optional with screw cap SD
Type Material Article No.
OP 501-28 500 ml bottle, 109100 bottleneck diam. 28 mm
OP 1001-28 1000 ml bottle, 108900 bottleneck diam. 28 mm
OP 501-60 500 ml bottle, 1413886 bottleneck diam. 60 mm
OP 1001-60 1000 ml bottle, 218500 bottleneck diam. 60 mm
SD 28-1 screw cap, 21960 core diameter 28 mm
SD 60-3 screw cap, 207203 core diameter 60 mm
OP| dimensions (approx.) in mm
75
200
60
Ø 28
160
90 75
Ø 28
75
200
60
Ø 28
160
90 75
Ø 28
ingo-man® classic M U L T I F U N C T I O N A L W A L L P L A T E S M U W31
MUW 3| dimensions (approx.) in mmMUW 1| dimensions (approx.) in mm
MUW 1|stainless steel board, white coated, for the flexible
fixing of dispensers by means of the patented
dispenser back plate and inset shackle with
magnetic fixing.
Type Material Article No.
MUW 1/250 stainless steel, powder coated, 1416182 white RAL 9010, 250 mm
MUW 1/300 stainless steel, powder coated, 1416178
white RAL 9010, 300 mm
MUW 3| stainless steel board, white coated, for the flexible
fixing of dispensers by means of the patented
dispenser back plate and inset shackle with
magnetic fixing.
Type Material Article No.
MUW 3/250 stainless steel, powder coated, 1416183 white RAL 9010, 250 mm
MUW 3/300 stainless steel, powder coated, 1416179
white RAL 9010, 300 mm
The Multi-Use-Wallplate system
According to the MUW principle the dispensers are hanged on to the wall plate by means of a shackle and are fixed on it magnetically.
The dispenser can be replaced, enlarged or exchanged. Also towels and gloves dispensers, timer and handouts etc. can easily be fixed magnetically. Possible fastening bores of previously mounted dispensers on the wall can be covered by the MUW.
The MUW system increases flexibility and hygiene. It consid-erably reduces the time needed and the expenditure for the mounting, renovation and cleaning.
120
250
or 3
00
16
180
250
or 3
00
Number of fixing shackles
3
Number of fixing shackles
1
Intended use
variable dispenser mounting for changing
operative ranges
Mode of application
all fields in hospitals, old people’s homes, caring
institutions, doctor’s practices, laboratories etc.
Intended use
variable dispenser mounting for changing
operative ranges
Mode of application
all fields in hospitals, old people’s homes, caring
institutions, doctor’s practices, laboratories etc.
32
MUW 5| dimensions (approx.) in mm
MUW 5|stainless steel board, white coated, for the flexible
fixing of dispensers by means of the patented
dispenser back plate and inset shackle with
magnetic fixing.
Type Material Article No.
MUW 5/250 stainless steel, powder coated, 1416184 white RAL 9010, 250 mm
MUW 5/300 stainless steel, powder coated, 1416180
white RAL 9010, 300 mm
MUW 7| stainless steel board, white coated, for the flexible
fixing of dispensers by means of the patented
dispenser back plate and inset shackle with
magnetic fixing.
Type Material Article No.
MUW 7/250 stainless steel, powder coated, 1416185 white RAL 9010, 250 mm
MUW 7/300 stainless steel, powder coated, 1416181
white RAL 9010, 300 mm
MUW RW| dispenser back plate for ingo-man dispenser of
the series 26 and IMP for fixing to a MUW wall
plate incl. suspension shackle and incorporated
magnetic fixing.
Number of suspension shackles
1
Type Material Article No.
MUW RW E plastic 1416733 500 ml
MUW RW T plastic 1416734
1000 ml
MUW 7| dimensions (approx.) in mm
300
250
or 3
00
420
250
or 3
00
Number of fixing shackles
7
Number of fixing shackles
5
Intended use
variable dispenser mounting for changing
operative ranges
Mode of application
all fields in hospitals, old people’s homes, caring
institutions, doctor’s practices, laboratories etc.
Intended use
variable dispenser mounting for changing
operative ranges
Mode of application
all fields in hospitals, old people’s homes, caring
institutions, doctor’s practices, laboratories etc.
Intended use
variable dispenser mounting for changing
operative ranges
Mode of application
all fields in hospitals, old people’s homes, caring
institutions, doctor’s practices, laboratories etc.
Soap dispenser IMP ELS A/30| W 82 x H 245 x D 215 mm| 1416000 P. 10 IMP ELS E/30| W 82 x H 245 x D 215 mm| 1416017 P. 10
IMP TLS A/30| W 92 x H 290 x D 225 mm| 1415993 P. 10 IMP TLS E/30| W 82 x H 245 x D 215 mm| 1415995 P. 10
IMP T A touchless| W 92 x H 290 x D 210 mm| 1415524 P. 8
E 26 A/25| W 82 x H 273 x D 162 mm| 1220100 P. 15 E 26 A/24| W 82 x H 273 x D 162 mm| 1220000 P. 15 E 26 A/28| W 82 x H 273 x D 162 mm| 1414882 P. 15 E 26 A/K| W 82 x H 273 x D 162 mm| 836900 P. 15 E 26 A/F| W 82 x H 273 x D 162 mm| 1415729 P. 15 E 26 A/KSP| W 82 x H 273 x D 162 mm| 1412576 P. 15
ELS 26 A/25| W 82 x H 283 x D 225 mm| 1115400 P. 15 ELS 26 A/24| W 82 x H 283 x D 225 mm| 1115700 P. 15 ELS 26 A/28| W 82 x H 283 x D 225 mm| 1414899 P. 15 ELS 26 A/K| W 82 x H 283 x D 225 mm| 837300 P. 15 ELS 26 A/F| W 82 x H 283 x D 225 mm| 1413878 P. 15 ELS 26 A/KSP| W 82 x H 283 x D 225 mm| 1412585 P. 15
T 26 A/25| W 94 x H 273 x D 162 mm| 1220900 P. 16 T 26 A/24| W 94 x H 273 x D 162 mm| 1220200 P. 16 T 26 A/28| W 94 x H 273 x D 162 mm| 1414886 P. 16 T 26 A/K| W 94 x H 273 x D 162 mm| 424200 P. 16 T 26 A/F| W 94 x H 273 x D 162 mm| 1415731 P. 16 T 26 A/KSP| W 94 x H 273 x D 162 mm| 1412593 P. 16
TLS 26 A/25| W 94 x H 327 x D 225 mm| 1005100 P. 16 TLS 26 A/24| W 94 x H 327 x D 225 mm| 1114300 P. 16 TLS 26 A/28| W 94 x H 327 x D 225 mm| 1414904 P. 16 TLS 26 A/K| W 94 x H 327 x D 225 mm| 835800 P. 16 TLS 26 A/F| W 94 x H 327 x D 225 mm| 1413880 P. 16 TLS 26 A/KSP| W 94 x H 327 x D 225 mm| 1412429 P. 16
E 26 P/25| W 82 x H 273 x D 162 mm| 1397900 P. 15 E 26 P/24| W 82 x H 273 x D 162 mm| 1397800 P. 15 E 26 P/28| W 82 x H 273 x D 162 mm| 1414883 P. 15 E 26 P/K| W 82 x H 273 x D 162 mm| 1398000 P. 15 E 26 P/F| W 82 x H 273 x D 162 mm| 1415730 P. 15 E 26 P/KSP| W 82 x H 273 x D 162 mm| 1412577 P. 15
ELS 26 P/25| W 82 x H 283 x D 225 mm| 1399100 P. 15 ELS 26 P/24| W 82 x H 283 x D 225 mm| 1399000 P. 15 ELS 26 P/28| W 82 x H 283 x D 225 mm| 1414901 P. 15 ELS 26 P/K| W 82 x H 283 x D 225 mm| 1399200 P. 15 ELS 26 P/F| W 82 x H 283 x D 225 mm| 1413877 P. 15 ELS 26 P/KSP| W 82 x H 283 x D 225 mm| 1412586 P. 15
T 26 P/25| W 94 x H 273 x D 162 mm| 1398200 P. 16 T 26 P/24| W 94 x H 273 x D 162 mm| 1398100 P. 16 T 26 P/28| W 94 x H 273 x D 162 mm| 1414887 P. 16 T 26 P/K| W 94 x H 273 x D 162 mm| 1398300 P. 16 T 26 P/F| W 94 x H 273 x D 162 mm| 1415732 P. 16 T 26 P/KSP| W 94 x H 273 x D 162 mm| 1412594 P. 16
TLS 26 P/25| W 94 x H 327 x D 225 mm| 1398800 P. 16 TLS 26 P/24| W 94 x H 327 x D 225 mm| 1398700 P. 16 TLS 26 P/28| W 94 x H 327 x D 225 mm| 1414905 P. 16 TLS 26 P/K| W 94 x H 327 x D 225 mm| 1398900 P. 16 TLS 26 P/F| W 94 x H 327 x D 225 mm| 1413879 P. 16 TLS 26 P/KSP| W 94 x H 327 x D 225 mm| 1412602 P. 16
E 26 E/25| W 82 x H 273 x D 162 mm| 1410817 P. 15 E 26 E/24| W 82 x H 273 x D 162 mm| 1410816 P. 15 E 26 E/28| W 82 x H 273 x D 162 mm| 1414884 P. 15
ELS 26 E/25| W 82 x H 283 x D 225 mm| 1124100 P. 15 ELS 26 E/24| W 82 x H 283 x D 225 mm| 1124000 P. 15 ELS 26 E/28| W 82 x H 283 x D 225 mm| 1414902 P. 15
T 26 E/25| W 94 x H 273 x D 162 mm| 1408600 P. 16 T 26 E/24| W 94 x H 273 x D 162 mm| 1410981 P. 16 T 26 E/28| W 94 x H 273 x D 162 mm| 1414888 P. 16
TLS 26 E/25| W 94 x H 327 x D 225 mm| 1123600 P. 16 TLS 26 E/24| W 94 x H 327 x D 225 mm| 1123500 P. 16 TLS 26 E/28| W 94 x H 327 x D 225 mm| 1414906 P. 16
LCP E| W 89 x H 305 x D 195 mm| 1413675 P. 19 LCP T| W 100 x H 350 x D 195 mm| 1413955 P. 19
TCV 2 A| W 94 x H 315 x D 162 mm| 221800 P. 29 ZCV 23 A| W 94 x H 423 x D 213 mm| 209200 P. 29
TV 23 A| W 94 x H 324 x D162 mm| 289400 P. 29
TFS 24 A| W 94 x H 278 x D 153 mm| 214300 P. 19
WTT 12| W 32 x H 65 x D 122 mm| 297700 P. 26 WTT 17| W 32 x H 75 x D 172 mm| 317100 P. 26
G 23 A| W 72 x H 166 x D 145 mm| 271200 P. 26 G 23 P| W 72 x H 166 x D 145 mm| 870700 P. 26
Waste bins SK 18 P| W 302 x H 306 x D 207 mm| 795100 P. 26
PB 2| polyester bags - 4 x 50 each| 506100
SK 26 P| W 305 x H 446 x D 195 mm| 966100 P. 24 SK 26 E| W 305 x H 446 x D 195 mm| 376700 P. 24 PB 2| polyester bags - 4 x 50 each| 506100
SK 60 P| W 400 x H 630 x D 270 mm| 705100 P. 24 SK 60 E| W 400 x H 630 x D 270 mm| 705200 P. 24 CB 60 E| W 410 x H 630 x D 280 mm| 966000 P. 24 PB 4| polyester bags - 200 each| 128100
AB 6 A| W 215 x H 300 x D 155 mm| 231000 P. 24
AB 6 P| W 215 x H 300 x D 155 mm| 231600 P. 24
AB 6 E| W 215 x H 300 x D 155 mm| 285100 P. 24 PB 1| polyester bags - 4 x 50 each| 461500
AB 15 A| W 320 x H 410 x D 190 mm| 287300 P. 24
AB 15 P| W 320 x H 410 x D 190 mm| 287400 P. 24
AB 15 E| W 320 x H 410 x D 190 mm| 484500 P. 24 PB 2| polyester bags - 4 x 50 each| 506100
AB 36 A| W 400 x H 485 x D 255 mm| 288200 P. 24
PB 3| polyester bags - 200 each| 186400
AB 6 HB 1 A| W 215 x H 300 x D 170 mm| 232500 P. 25
AB 6 HB 1 P| W 215 x H 300 x D 170 mm| 232600 P. 25
AB 6 HB 1 E| W 215 x H 300 x D 170 mm| 284700 P. 25 PB 1| polyester bags - 4 x 50 each| 461500 HYGB| hygiene bag - 200 each| 509200
AB 6 HB 2 A| W 215 x H 300 x D 170 mm| 1415091 P. 25
AB 6 HB 2 P| W 215 x H 300 x D 170 mm| 1415092 P. 25
AB 6 HB 2 E| W 215 x H 300 x D 170 mm| 1415093 P. 25 PB 1| polyester bags - 4 x 50 each| 461500 HYGB K| hygiene bag - 4 x 25 each| 1245800
Hygiene bag dispenser HB 1 A| W 130 x H 275 x D 30 mm| 311500 P. 25 HB 1 P| W 130 x H 275 x D 30 mm| 1120700 P. 25 HB 1 E| W 130 x H 275 x D 30 mm| 798500 P. 25 HYGB| hygiene bag - 200 each| 509200
HB 2 P| W 91 x H 136 x D 24 mm| 1412012 P. 26 HB 2 E| W 91 x H 136 x D 24 mm| 1412013 P. 26 HYGB K| hygiene bag - 4 x 25 each| 1245800
Paper towel dispenser SHS 1 A| W 273 x H 240 x D 143 mm| 964800 P. 23
HS 3 A| W 275 x H 355 x D 130 mm| 850400 P. 24
HS 15 A| W 275 x H 185 x D 130 mm| 801400 P. 23 HS 15 P| W 275 x H 185 x D 130 mm| 801500 P. 23 HS 15 EE| W 275 x H 185 x D 130 mm| 152100 P. 23
HS 31 A| W 275 x H 355 x D 130 mm| 778900 P. 23 HS 31 P| W 275 x H 355 x D 130 mm| 779000 P. 23 HS 31 EE| W 275 x H 355 x D 130 mm| 297100 P. 23
Submersible pumps BPC 10| thread Ø 60 mm, 1000 ml| 674900 P. 30 BPC 25| thread Ø 60 mm, 2500 ml| 286300 P. 30 BPC 100| thread Ø 60 mm, 10 Liter| 963400 P. 30
BPK 10| thread Ø 60 mm, 1000 ml| 218400 P. 30 BPK 25| thread Ø 60 mm, 2500 ml| 218200 P. 30 BPK 100| thread Ø 60 mm, 10 Liter| 305800 P. 30
Type W x H x D Article No. Page Type W x H x D Article No. Page (approx. dimensions in mm) (approx. dimensions in mm)
ingo-man® O V E R A L L V I E W33
ingo-man® - overall view
in case of an order please always indicate the article number.
material of the housing (last letter of the type)A = aluminium, silver anodizedP = aluminium, powder coated white (RAL 9010)E = stainless steel, ground
we are gladly prepared to offer you
printing or other colours of powder
coating.
Type W x H x D Article No. Page Type W x H x D Article No. Page (approx. dimensions in mm) (approx. dimensions in mm)
34O V E R A L L V I E W ingo-man®
Accessories OP 501-28| 500 ml, bottleneck Ø 28 mm| 109100 P. 30 OP 1001-28| 1000 ml, bottleneck Ø 28 mm| 108900 P. 30
OP 501-60| 500 ml, bottleneck Ø 60 mm| 1413886 P. 30 OP 1001-60| 1000 ml, bottleneck Ø 60 mm| 218500 P. 30
SD 28-1| for bottleneck Ø 28 mm| 219600 P. 12
SD 60-3| for bottleneck Ø 60 mm| 207203 P. 12
DU 16 E| W 91 x H 130 x D 64 mm| 964900 P. 28
BS 10 S| W 56 x H 360 x D 137 mm| 965000 P. 27 BS 10 D| W 55 x H 360 x D 123 mm| 965100 P. 27
HWB| W 110 x H 35 x D 43 mm| 331900 P. 27
BA| W 262 x H 155 x D 163 mm| 965200 P. 27
WH 10 E| for 1000 ml bottle| 1415103 P. 21 WH 25 E| for 2500 ml bottle| 1415104 P. 21
ped 2| W 225 x H 390 x D 400/275 mm| 254900 P. 28
VF IMPT T A| for 1000 ml Touchless Spender| 2400076 P. 7
VF IMP ELS A| for 500 ml, with window| 2400067 P. 12
VF IMP TLS A| for 1000 ml, with window| 2400064 P. 12
LCP VS E| for 500 ml, transparent| 1416315 P. 19 LCP VS T| for 1000 ml, transparent| 1416316 P. 19
VS E26 A| for 500 ml, with visual slot| 292501 P. 20 VF E26 A| for 500 ml, with window| 292504 P. 20 VS E26 P| for 500 ml, with visual slot| 1157000 P. 20 VS E26 E| for 500 ml, with visual slot| 662300 P. 20
VS T26 A| for 1000 ml, with visual slot| 220900 P. 20 VF T26 A| for 1000 ml, with window| 544002 P. 20 VS T26 P| for 1000 ml, with visual slot| 949000 P. 20 VS T26 E| for 1000 ml, with visual slot| 310000 P. 20
WH E24/25/26 E| for 500 ml dispenser| 384100 P. 21 WH T24/25/26 E| for 1000 ml dispenser| 212600 P. 21
WH FE| 500 ml, front removal| 1414938 P. 21 WH RE| 500 ml, for tubular frame| 1414936 P. 22 WH DE| 500 ml, for Dräger rail| 1414932 P. 22
WH FT| 1000 ml, front removal| 1414940 P. 21 WH RT| 1000 ml, for tubular frame| 1414934 P. 22 WH DT| 1000 ml, for Dräger rail| 1414930 P. 22
WP E A| 500 ml, for parallel fixing| 290100 P. 22 WP T A| 1000 ml, for parallel fixing| 290200 P. 22
SH 4 T IMP| for Touchless, 1000 ml| 1416600 P. 7
SH 1| for wall mounting| 290000 P. 20 SH 3| for wall mounting| 1165200 P. 20 SH E26| for dispenser, 500 ml| 263800 P. 20 SH T26| for dispenser, 1000 ml| 161100 P. 20
ABF| pedal for AB| 1410911 P. 24
UHS| for wall mounting| 1413316 P. 28 RRH| magnetset| 1413329 P. 28
Multifunction wall plate MUW system MUW 1/250| W 120 x H 250| 1416182 P. 31 MUW 1/300| W 120 x H 300| 1416178 P. 31
MUW 3/250| W 180 x H 250| 1416183 P. 31 MUW 3/300| W 180 x H 300| 1416179 P. 31
MUW 5/250| W 300 x H 250| 1416184 P. 32 MUW 5/300| W 300 x H 300| 1416180 P. 32
MUW 7/250| W 420 x H 250| 1416185 P. 32 MUW 7/300| W 420 x H 300| 1416181 P. 32
MUW RW E| dispenser back plate| 1416733 P. 32 MUW RW T| dispenser back plate| 1416734 P. 32
ingo-man®
Liability for defects and guaranteeApart from the general legal liability for material defects (2 years), a voluntary three-year manufacturer’s warranty is issued starting from delivery date (applied only in case of intended use and when using original Ophardt parts).
ing
o-m
an® R
efer
ence
man
ual
081
101
E
Ophardt Hygiene-Technik GmbH + Co. KG • Lindenau 27 • 47661 Issum • GermanyPhone +49 28 35 18-0 • Fax +49 28 35 18-77
Email [email protected] • www.ophardt.com • www.gotoHTI.com