ingersoll rand air compressors - mb air systems · PDF fileingersoll rand air compressors type 30 reciprocating compressors. ... provide the level of efficiency and reliability

Distributors For:

Branch Directory:

149 Glasgow Road Wellheads Road Wishaw Farburn Industrial Estate

Lanarkshire Dyce, Aberdeen ML2 7QJ AB21 7HG Tel 01698 355711 Tel 01224 723434 Fax 01698 359299 Fax 01224 723545 Fleming Close Woodland House Segensworth East Unit 2, Hall Dene Way Fareham Seaham Grange Ind Est Hampshire Seaham PO15 5SB SR7 0PU Tel 01489 588398 Tel 0191 521 4111 Fax 01489 588381 Fax 0191 521 1616

E-mail [email protected]

www.airwinch.co.uk

ingersoll rand air compressors

type 30 reciprocating compressors

The Ingersoll Rand T30 has been the leader in its class since it

was introduced in 1929. Whether this is measured by reliability,

efficiency, rugged flexibility or maintainability, it has no equal.

Designed for heavy industrial applications, the two stage

reciprocating air compressors provide the quality and

performance that exceed customer requirements.

Splash Lubrication

Simple and reliable,

does not require an oil

pump, making the system

inexpensive and easy

to maintain

Removable cylinders

Easy to repair, provides even,

360° cooling and eliminates

hot spots

Centrifugal unloader

(From 10HP on)

Saves motor life

Overhung crankshaft

Precision balanced to run

smoothly and quietly

One piece connecting rod

For few wearing parts

Finned Intercooler

Runs cool, even in the most

demanding conditions

Simple multifinger valves

Dependable and easy

to maintain

No other ReciprocatingCompressor offers these

efficient, cost-savingfeatures:

A durable cast iron pump

which provides 15,000+

hours of trouble-free

service

A 100% copper finned

intercooler lowers operating

temperatures and extends

pump life

An overhung crankshaft

and single-piece connecting

rod allow access to the

running gear for easy

maintenance

Individually cast cylinders

provide flexible, less

expensive maintenance on

just one cylinder at a time

rather than servicing the

entire pump

The Inside Story

After all, we’ve been doing this for over 100 years!

Others may claim to handle heavy duty

applications, but the T30 defines the

concept. Run it in the most demanding

intermediate duty application imaginable.

It won’t make any difference because this

compressor performs with total

dependability in the most demanding,

heavy-duty industrial applications.

Throughout this brochure we try to show you

some of the features which make the T30

unique and ideal to meet your demands of a

compressor package in the 3-30 HP range.

Many compressor applications need care

and experience to ensure that the correct

machine and configuration is selected to

provide the level of efficiency and reliability

which you expect. Our Sales offices and

Distributors are ideally qualified and

experienced to assist you in this task.

If you are seeking information about a

new compressor, advice about an existing

installation or ancillary equipment or

spare parts, you will find knowledge

available to assist you.

Introduction

Value RangeThe Type-30TM Value Package offers customers an

economical and dependable compressed air solution.

It is perfect for commercial, automotive, and light

industrial applications.

Durable 100% cast iron construction.

Automatic start/stop pressure switch operation.

Manual tank drain.

Intermittent duty cycle.

11 bar receiver mounted,

14 bar base mounted.

CE Marked receivers to 87/404/EEC.

4 pole IP55 TEFV Motor.

Standard voltage 400-3-50.

Totally enclosed belt

guard design.

Dry type inlet filter.

Flexible discharge tube.

Factory fill of lubricant.

Auto Start and Stop

regulation by pressure switch up

to and including 7.5hp.

Constant Speed Control

10hp to 30hp.

Auto Start and Stop regulation by pressure

switch (3/4hp) or by the starter (5.5/7.5hp)

up to and including 7.5hp.

Dual Control regulation 10hp to 30hp.

Star Delta starter from 5.5hp.

Low Oil Level Switch.

Auto Condensate Drain on

all receiver mounted units.

Belt Guard Mounted,

Air Cooled After Cooler.

Anti-Vibration pads.

Pre

miu

m R

ange

Fea

ture

s

Premium RangeThe Type-30TM Premium Package offers all the features of the

Value Package plus a number of additional features to further

enhance durability and performance. The Premium Package is

ideally suited for manufacturing and more heavy duty

industrial applications.

Belt guard mounted, air cooled after cooler.

Low oil level switch to reduce maintenance requirement.

Provides more reliable performance.

Auto condensate drain on receiver mounted units.

High performance with lower noise levels.

T30 Range

Premium Range Illustrated

Val

ue R

ange

Fea

ture

s

T30/200/3 V 2.2 3.0 11 200 290 10.2 162 x 68 x 122 140

T30/X/3 V 2.2 3.0 14 - 290 10.2 125 x 80 x 85 90

T30/200/4 V 3.0 4.0 11 200 387 13.7 162 x 68 x 122 145

T30/X/4 V 3.0 4.0 14 - 362 12.8 125 x 80 x 85 95

T30/200/5.5 V 4.0 5.5 11 200 523 18.5 162 x 68 x 122 170

T30/X/5.5 V 4.0 5.5 14 - 523 18.5 125 x 80 x 85 115

T30/200/7.5 V 5.5 7.5 11 200 702 24.8 162 x 68 x 122 180

T30/X/7.5 V 5.5 7.5 14 - 657 23.2 125 x 80 x 85 135

T30/200/10 V 7.5 10.0 11 200 1013 35.8 162 x 80 x 145 235

T30/X/10 V 7.5 10.0 14 - 1013 35.8 125 x 80 x 85 185

T30/500/15 V 11.0 15.0 11 500 1441 50.9 210 x 90 x 165 425

T30/X/15 V 11.0 15.0 14 - 1292 45.6 155 x 85 x 110 295

T30/500/20 V 15.0 20.0 11 500 1713 60.5 210 x 90 x 165 435

T30/X/20 V 15.0 20.0 14 - 1713 60.5 155 x 85 x 110 300

T30/500/25 V 18.5 25.0 11 500 2620 92.5 210 x 90 x 165 580

T30/X/25 V 18.5 25.0 14 - 2620 92.5 155 x 85 x 110 460

T30/500/30 V 22.0 30.0 11 500 2932 103.5 210 x 90 x 165 600

T30/X/30 V 22.0 30.0 14 - 2932 103.5 155 x 85 x 110 480

Mod

el

Mot

or

KwM

otor

Hp

Press

ure

Max

bar(g

)

Receiv

er

litre

s

Piston

Disp

lacem

ent

L/M

in

Piston

Disp

lacem

ent

CFM

Dimen

sions

LxW

xH (c

m)W

eight

kg

Specification

T30/200/3 P 2.2 3.0 11 200 290 10.2 162 x 78 x 122 180

T30/X/3 P 2.2 3.0 14 - 290 10.2 125 x 95 x 85 130

T30/200/4 P 3.0 4.0 11 200 387 13.7 162 x 78 x 122 195

T30/X/4 P 3.0 4.0 14 - 362 12.8 125 x 95 x 85 145

T30/200/5.5 P 4.0 5.5 11 200 523 18.5 162 x 68 x 122 220

T30/X/5.5 P 4.0 5.5 14 - 523 18.5 125 x 95 x 85 165

T30/200/7.5 P 5.5 7.5 11 200 702 24.8 162 x 68 x 122 230

T30/X/7.5 P 5.5 7.5 14 - 657 23.2 125 x 95 x 85 185

T30/200/10 P 7.5 10.0 11 200 1013 35.8 162 x 80 x 145 300

T30/X/10 P 7.5 10.0 14 - 1013 35.8 125 x 95 x 85 250

T30/500/15 P 11.0 15.0 11 500 1441 50.9 210 x 90 x 165 500

T30/X/15 P 11.0 15.0 14 - 1292 45.6 155 x 100 x 110 370

T30/500/20 P 15.0 20.0 11 500 1713 60.5 210 x 90 x 165 510

T30/X/20 P 15.0 20.0 14 - 1713 60.5 155 x 100 x 110 375

T30/500/25 P 18.5 25.0 11 500 2620 92.5 210 x 90 x 165 655

T30/X/25 P 18.5 25.0 14 - 2620 92.5 155 x 100 x 110 535

T30/500/30 P 22.0 30.0 11 500 2932 103.5 210 x 90 x 165 675

T30/X/30 P 22.0 30.0 14 - 2932 103.5 155 x 100 x 110 555

Mod

el

Mot

or

KwM

otor

Hp

Press

ure

Max

bar(g

)

Receiv

er

litre

s

Piston

Disp

lacem

ent

L/M

in

Piston

Disp

lacem

ent

CFM

Dimen

sions

LxW

xH (c

m)W

eight

kg

The new rationalised T30 range comprises of Value and Premium

packages making choosing the right compressor even easier.

Ingersoll Rand - T30

a leader in its class

since 1929

www.air.irco.com

Industrial Systems - LightAir Solutions GroupSwan Lane, Hindley GreenWigan WN2 4EZ, UKTel: +44 (0)1942 257171Fax: +44 (0)1942 254162

Ingersoll-Rand compressors are not designed, intended, or approved for breathing applications. Ingersoll-Rand does not approve specialisedequipment for breathing air applications and assumes no responsibility or liability for compressors used for breathing air service. Nothing contained onthese pages is intended to extend any warranty or representation, expressed or implied, regarding the product described herein. Any such warrantiesor terms and conditions of sale of products shall be in accordance with Ingersoll-Rand’s standard terms and conditions for sales of such products,which are available on request. Product improvement is a continuing goal at Ingersoll-Rand. Designs and specifications are subject to change withoutnotice or obligation.

CPN 22272025

T30 Reciprocating Air Compressors

Customised Engineered Packages

These are available to meet individual customers configurations and specifications.

This ‘special’ package was designed and built for a Middle-East Oil Company and includes duplex 7100 T30 compressors and dryers, filters and controls all by Ingersoll-Rand.

All Season Select®

All Season Select® lubricant is a synthetic, all-temperatureblend that is designed to increase efficiency, reduce wear and prevent carbon buildup. It performs four times longer thanpetroleum-based lubricants. Recommended 2,000 hours ofservice between lubricant change-out under normal operating conditions.

• Specifically formulated for T30 Cast Iron Range machines• Extended working life• Reduced friction• Eliminates carbon build-up• Longer oil change intervals - 2000 hours or 2 years• Greater fire resistance• Excellent high temperature protection• Easy start-up

Warranty

• 2 years warranty for T30 packages

T30Reciprocating Air Compressors

T30 Reciprocating Air Compressors

This T30 has no oil in the cylinders, but uses teflon ringsand rider bands. They supply air free from oil.They are available on base or receiver, with versionsfrom 2 to 20 HP.

Standard Features

• CE Marked receivers to 87/404/EEC• 4 pole IP55 TEFV Motor• Standard voltage 400-3-50• Auto Start and Stop regulation by pressure switch

up to 4 hp• Constant Speed Control regulation by auxiliary valve

from 5.5hp on base mounted units• Constant speed control regulation by auxiliary valve

from 10hp on receiver mounted units• DOL starting by pressure switch up to 5.5hp• Star Delta starting available from 10hp• Inlet air filter• Pressure Gauge from receiver pressure• Low oil level switch fitted as standard 10T3NLH200

Oilless Two Stage Non-Lubricated

OL5F55

T30 Two Stage Reciprocating Compressor

75 Years on and still going strongThe Ingersoll-Rand T30 has been the leader in its class since it was introduced in 1929. Whether this is measured by reliability, efficiency, rugged flexibility or maintainability, it has no equal.

Designed for heavy industrial applications, the twostage reciprocating air compressors provide the qualityand performance that exceed customer requirements.

Others may claim to handle heavy duty applications, but the T30 defines the concept. Run it in the mostdemanding intermediate duty application imaginable.It won’t make any difference because this compressor performs with total dependability in the most demanding,heavy-duty industrial applications.

Throughout this brochure we try to show you some of the features which make the T30 unique and ideal to meet your demands of a compressor package in the 2-30 HP range.

Many compressor applications need care and experience to ensure that the correct machine and configuration is selected to provide the level of efficiency and reliability which you expect.

Our Sales offices and Distributors are ideally qualified and experienced to assist you in this task. If you are seeking information about a new compressor, advice about an existing installation or ancillary equipment or spare parts, you will find knowledge available to assist you.

After all, we’ve been doing this for over 100 years!

Ingersoll-Rand’s oilless air compressors were designed forthe tough requirements of industries demanding oil-free air.Superior dual cooling and precision fit of high quality components provide reliable 24-hour continuous operation.

Standard Features

• CE Marked receivers to 87/404/EEC• 4 pole IP55 TEFV Motor• Standard voltage 400-3-50• Auto Start and Stop regulation by pressure switch

up to 7.5hp• Dual control regulation 10hp and above• Star Delta starting available from 10hp• Aftercoolers standard on all units• Receiver mounted auto drain• Safety relief valve and check valve fitted

Model Bare Motor Pressure Max Receiver Piston Revolutions Dimensions

Unit Displacement per minute LxWxH

kW hp bar(g) litres l/min rpm cm

OL5F55 OL5 4.0 5.5 8.6 270 690 820 146 x 64 x 112

OL5X55 OL5 4.0 5.5 8.6 - 690 820 106 x 54 x 59

OL5F75 OL5 5.5 7.5 8.6 270 930 1100 146 x 64 x 112

OL5X75 OL5 5.5 7.5 8.6 - 930 1100 106 x 54 x 59

OL10H100 OL10 7.5 10 8.6 500 1430 1135 187 x 70 x 129

OL10X100 OL10 7.5 10 8.6 - 1430 1135 128 x 66 x 65

OL15H200 OL15 15 20 8.6 500 1900 945 187 x 70 x 129

OL15X200 OL15 15 20 8.6 - 1900 945 128 x 66 x 65

OL25VH300 OL25 22 30 8.6 500 3300 1100 220 x 115 x 216

OL25X300 OL25 22 30 8.6 - 3300 1100 185 x 94 x 116

Model Bare Motor Pressure Max Receiver Piston Revolutions Dimensions Weight

Unit Displacement per minute LxWxH

kW hp bar(g) litres l/min rpm cm kg

23ANLE20 23ANL 1.5 2.0 6.9 200 230 730 137 x 51 x 108 170

235HNLE30 235HNL 2.2 3.0 6.9 200 310 490 143 x 54 x 107 210

235HNLF40 235HNL 3.0 4.0 6.9 270 450 710 146 x 54 x 111 232

5T2NLH100 5T2NL 7.5 10 8.6 500 1010 900 187 x 63 x 153 475

10T3NLH150 10T3NL 11 15 8.6 500 1500 670 187 x 69 x 192 615

10T3NLH200 10T3NL 15 20 8.6 500 2000 890 187 x 69 x 192 630

23ANLX20 23ANL 1.5 2.0 6.9 N/A 230 730 80 x 48 x 59 84

235HNLX30 235HNL 2.2 3.0 6.9 N/A 310 490 92 x 56 x 58 127

235HNLX40 235HNL 3.0 4.0 6.9 N/A 450 710 92 x 56 x 58 127

5T2NLX55 5T2NL 4.0 5.5 8.6 N/A 640 570 128 x 63 x 82 227

5T2NLX100 5T2NL 7.5 10 8.6 N/A 1010 900 128 x 63 x 82 252

10T3NLX150 10T3NL 11 15 8.6 N/A 1500 670 154 x 79 x 115 360

10T3NLX200 10T3NL 15 20 8.6 N/A 2000 890 154 x 79 x 115 380

Splash Lubrication Simple and reliable, does not require an oil pump, making the system inexpensive and easy to maintain

Removable cylinders Easy to repair, provides even,360° cooling and eliminates hot spots

Centrifugal unloader(From 10HP on) Saves motor life

Overhung crankshaft Precision balanced to runsmoothly and quietly

One piece connecting rodFor few wearing parts

Finned Intercooler Runs cool, even in the mostdemanding conditions

Simple multifinger valvesDependable and easy to maintain

No other Reciprocating Compressoroffers these efficient, cost-saving features:

• A durable cast iron pump which provides 15,000 + hours of trouble-free service

• A 100% copper finned intercooler lowers operating temperatures and extends pump life

• An overhung crankshaft and single-piece connecting rod allow access to the running gear for easy maintenance

• Individually cast cylinders provide flexible, less expensive maintenance on just one cylinder at a time rather than servicing the entire pump

The Inside Story

Vacuum Pumps

For vacuum applications, single and two stage base mounted packages are available.

Standard Features

• 4 pole IP55 TEFV Motor• Standard voltage 400-3-50• Star Delta starting available from 10hp• Factory-fill of lubricant

7VX75

The Inside Story

Model Bare Motor Vacuum Max Receiver Piston Revolutions Dimensions Weight

Unit Displacement per minute LxWxH

kW hp mm Hg % litres l/min rpm cm kg

V235X20 V235 1.5 2.0 737 97.0 - 510 790 83 x 46 x 48 95

V235TX20 V235T 1.5 2.0 752 98.9 - 255 790 83 x 46 x 48 95

V244X30 V244 2.2 3.0 737 97.0 - 900 790 88 x 56 x 53 148

V244TX30 V244T 2.2 3.0 753 99.1 - 450 790 88 x 56 x 53 148

V255X55 V255 4.0 5.5 737 97.0 - 1730 770 92 x 63 x 61 173

V255TX55 V255T 4.0 5.5 754 99.2 - 870 770 92 x 63 x 61 173

7VX75 7V 5.5 7.5 737 97.0 - 2800 900 122 x 65 x 72 260

7VTX75 7VT 5.5 7.5 753 99.1 - 1400 900 122 x 65 x 72 260

15VX100 15V 7.5 10 742 97.0 - 3600 770 137 x 79 x 88 325

15VTX100 15VT 7.5 10 754 99.2 - 2400 770 137 x 79 x 88 325

Two Stage Lubricated

AE3E30

Standard Features

• CE Marked receivers to 87/404/EEC• 4 pole IP55 TEFV Motor• Standard voltage 400-3-50• Auto Start and Stop regulation by pressure switch up to 7.5 hp• Dual control regulation on 10hp to 30hp

receiver mounted units• Constant Speed Control on 10hp to 30hp

Base Mounted units• DOL starting by pressure switch up to 7.5hp• DOL starter (10hp to 30hp)• Star Delta Starter available from 5.5hp• Low oil level switch fitted from 10hp to 30hp• Totally enclosed belt guard design• Dry type inlet filter• Flexible discharge tube• Factory-fill of lubricant

H15T4X200

Range of base-mounted compressors that can reach pressures as high as 345 bar.

Standard Features

• 4 pole IP55 TEFV Motor• Standard voltage 400-3-50• Auto Start and Stop regulation by pressure switch• DOL starting by pressure switch• Star Delta starting available from 10hp• Low oil level switch fitted as standard

(except model 231x30)• Intercooler fitted• Inlet air filter• Cast iron multi stage pump unit• Factory-fill of lubricant

High Pressure

Model Pump Unit Motor Pressure Max Receiver Piston Dimensions Weight

Displacement LxWxH

kW hp bar(g) litres l/min CFM cm kg

AE3E30 2340 2.2 3.0 11.0 200 290 10.2 138 x 49 x 98 140

AE3F40 2340 3.0 4.0 11.0 270 396 13.9 146 x 49 x 103 160

AE3F55 2475 4.0 5.5 11.0 270 525 18.5 146 x 53 x 106 180

AE3H75 2475 5.5 7.5 11.0 500 705 24.9 187 x 53 x 116 260

AE3H100 2545 7.5 10.0 11.0 500 1010 35.6 187 x 74 x 126 315

AE3H150 7100 11.0 15.0 11.0 500 1440 50.8 187 x 71 x 138 425

AE3H200 7100 15.0 20.0 11.0 500 1720 60.7 187 x 71 x 138 435

AE3H250 3000 18.5 25.0 11.0 500 2640 93.2 187 x 83 x 152 580

AE3H300 3000 22.0 30.0 11.0 500 2960 104.5 187 x 83 x 152 600

E3E30 2340 2.2 3.0 14.0 200 290 10.2 137 x 49 x 95 180

E3F40 2340 3.0 4.0 14.0 300 370 13.0 160 x 49 x 100 195

E3F55 2475 4.0 5.5 14.0 300 525 18.5 160 x 49 x 103 230

E3H75 2475 5.5 7.5 14.0 500 660 23.3 187 x 61 x 122 303

E3H100 2545 7.5 10.0 14.0 500 1010 35.6 187 x 74 x 130 360

E3H150 7100 11.0 15.0 14.0 500 1280 45.2 187 x 71 x 141 505

E3H200 7100 15.0 20.0 14.0 500 1720 60.7 187 x 71 x 141 520

E3H250 3000 18.5 25.0 14.0 500 2640 93.2 187 x 83 x 157 635

E3H300 3000 22.0 30.0 14.0 500 2960 104.5 187 x 83 x 157 635

E3X30 2340 2.2 3.0 14.0 N/A 290 10.2 82 x 49 x 50 90

E3X40 2340 3.0 4.0 14.0 N/A 370 13.0 82 x 49 x 50 90

E3X55 2475 4.0 5.5 14.0 N/A 525 18.5 85 x 53 x 53 115

E3X75 2475 5.5 7.5 14.0 N/A 660 23.3 85 x 53 x 53 135

E3X100 2545 7.5 10.0 14.0 N/A 1010 35.6 106 x 74 x 66 183

E3X150 7100 11.0 15.0 14.0 N/A 1280 45.2 126 x 71 x 80 292

E3X200 7100 15.0 20.0 14.0 N/A 1720 60.7 126 x 71 x 80 292

E3X250 3000 18.5 25.0 14.0 N/A 2640 93.2 133 x 83 x 92 460

E3X300 3000 22.0 30.0 14.0 N/A 2960 104.5 133 x 83 x 92 480

Model Bare Motor Pressure Max Receiver Piston Revolutions Dimensions Weight

Unit Displacement per minute LxWxH

kW hp bar(g) litres l/min rpm cm kg

231X30 231 2.2 3.0 35 N/A 211 670 87 x 51 x 51 100

7T2X100 7T2 8.5 12.5 35 N/A 1050 820 124 x 67 x 84 275

15T2X200-35 15T2 15 20 35 N/A 1471 950 143 x 84 x 87 415

15T2X200-70 15T2 15 20 70 N/A 1230 790 143 x 84 x 87 415

15T4X200 15T4 15 20 241 N/A 988 930 150 x 78 x 108 505

H15T4X200 H15T4 15 20 345 N/A 988 930 150 x 78 x 108 525