Industry catalogue

Safety in Progress

Since 1789

CUT RESISTANCEEN 388 / LEVEL 4 EN 388 / LEVEL 3

TDM LEVEL 5 / EN 388 LEVEL 5 TDM LEVEL 4 / EN 388 LEVEL 5

14

15 19 25 30 37 38 40

HEAT RESISTANCE600C / 800C and + 350C / 500C 200C / 350C 250C

36

Index200 Years of Family Business Rostaing Today An Eco-Design Sustainable Development Mastering Materials ISO 13997 Standard Ecological Footprint, Strategic Positioning Legal European Standards Safety sized to fit you2

COLD RESISTANCE- 30C 0C

42 46

41 43

PROFESSIONSWELDING ANTI-VIBRATION CONSTRUCTION GLASS WORKS FORESTRY 4 5 6 8 PAINTING

45

CRYOGENICS - 197C

47 49 50 53 52 56

CONSTRUCTION / FINISHING WORK ANTI-PUNCTURE

51

54 59 60 61 64

OPTICAL / CLEANING / WATCHMAKING / JEWELLERY BITE PROTECTION CUSTOM GLOVESwww.rostaing.com +33 (0) 474 460 715 Consult our website at:

58

7 12 10

CRUSH PROTECTION FIRE-FIGHTING LANDSCAPING FOOD INDUSTRY

62

63

13 71

or order a brochure on:

HANDLING

PRECISION HANDLING WET HANDLING OILY HANDLING

66

65 67 68 693

200 years of family businessJoseph Rostaing 1760 - 1830 Founder

Franois Rostaing 1817 - 1895

Johannes Rostaing 1856 - 1939

1789

Joseph Rostaing established a tannery in Villieu - France

1959Lon Rostaing 1891 - 1960

Began making protective gloves

1976

Creation of the Gardening/DIY

Jean Rostaing Chairman

1984

Established a factory in Morocco

Rostaing todayRostaing owns high quality and performant production facilities and is 100% family-owned: this allows us to meet our customers changing needs and high expectations. Research & Development is made in France. The know-how in the following technologies.

1995Catherine Brazier Rostaing General Manager Garden/DIY

Set up a Vietnamese subsidiary

2002

Creation of the Administration / Military department

Cut/sewn Seamless knitting Cut/Sewn / coating by dipping Seamless knitted / coating by dipping Seamless knitted / cut/Sewn Seamless knitting / screenprinting

Stphane Rostaing General Manager France

2004

Export development in Europe

1 Tannery in Vietnam* 3 production plants in Vietnam

2007Jacques Rostaing General Manager Vietnam

Establishment of a tannery in Vietnam

2 production plants in Morocco 1 logistics platform Rostaing manufactures 6

000 000 pairs per year sold on the

2009

Awarded the ISO 14001 certificate.

5 continents.

4

5

Sustainable DevelopmentThe ROSTAING CharterEnvironment: ISO 14001 - Certification Labour: Respect of the ILO principles Economic: Respecting regulations on fair tradeBecause we oversee production from beginning to end, we can implement positive changes at every stage. Economic and labour decisions, eco-design policy, product strategy Today, having been awarded the AFAQ ISO 14001 certification, we feel our expertise has been recognised. The French Quality Assurance Association We began steering the company towards sustainable development in 2004.

Rostaing Tannery

An Eco-Design

Choice of a renewable energy source: solar power.

Rainwater collection. Wastewater treatment plant.

Respect of the ILO principles Adherence to REACH regulations.

Kg

Reduction in the volume of packaging.

6

7

Ecological footprintObjectives Bringing sustainable solutions to our clients and reducing the use of raw materials. Means Creating gloves that are durable, when professionally cleaned, and thus drastically reducing waste.

Strategic PositioningInformation Every product in the range is marked by symbols explaining how to wash the item:

40

Coloured fabrics, up to 40: normal cycle Do not wash

Refraining from using bad-quality disposable products, which are excessively utilized and put a strain on our planets resources.

Product life spanLong lasting + washable Long lasting Disposable

LAVAGE WASHING

SECHAGE DRYING

Industrial cleaningS

Do not bleach

NETTOYAGE A SEC CLEANING TO FIND DRY

SECHAGE DRYING

Dry cleaning

Tumble dry: moderate cycle Do not iron Do not dry clean (do not use stain removers) Normal dry clean Do not tumble dry

LON GL

ING ST A

ACC EP

BLE TA

LO

Industrial Cleaning InstructionsMETHOD: Industrial cleaning at 60 (cycle 60 III of the standard: NF G 07.139 - Sept - 1989) MACHINE: GIRBAU spinner washer (20 kg). LOAD: 13 kg of polyester/cotton. WASH: 7.5 g/kg of dry fabrics Using the pre-wash and main wash cycles. CYCLE: Pre wash: 8 minutes at 40C. Wash: 15 minutes at 60C. Rinse: 3 X 5 minutes. Sour during the 2nd rinse using 3cc/kg of acetic acid at 36% perkilogram of fabrics. Final rinse: 4 minutes.

Dry cleaning instructionsMETHOD: According to the standard: NF EN ISO 3175.2 - 1998. MACHINE: UNION 12 kg. LOAD: 12 kg de polyester/cotton. SOLUTION: Tetrachloroethylene combined with surface active agent + 2% water. CYCLE : Soak: 15 min avec circulation de solvant Temprature du solvant 30C. Empty - Spin Rinse: 5 minutes in neat solvents. ViEmpty - Spin Dry: at a regulated 80C. Cool cycle 5 minutes.The wash cycle may be repeated according to the amount of oil and grease on the fabric. The rinse cycle must then be repeated after each wash cycle.

NG + STI LA NG

XIMAL MA

WASHABLE

DRY:

In a revolving dryer for 20 minutes at 60 Follow with a cool cycle for 5 minutes.

DRY:

DIS8

BAD

in a revolving dryer for 20 minutes at 60C, Follow with a 5 minute cooling cycle.

The drying temperature should not exceed 60 so as not to alter the fabrics.

POS

ABLES9

Mastering Materials

Mastering Materials

LEATHER The full-grain leather we use is both strong and supple. Our split leather offers excellent abrasion and tear resistance. Leather, which is naturally breathable, offers a high level of comfort and excellent dexterity. Special treatments impart additional properties. Water-repellent: the leather becomes resistant to water, and washable, and its stays soft after drying. Oil-repellent: the leather becomes resistant to oil. Siliconized: the leather becomes resistant to flying incandescent particles. Heat resistance: the leather becomes undeformable at 250C. COTTON A natural fibre that is supple, absorbent and soft. It has the advantage of being a good thermal insulating material and may be fireproofed. (PROBAN treatment).

ACRYLIC A synthetic material that is resistant to abrasion and tearing. DYNEEMA High-Density Polyethylene offers exceptional resistance to abrasion, breaking and shearing. It provides a feeling of freshness and comfort and is very lightweight. KEVLAR TWARON Para-aramide is resistant to breaking and shearing and offers excellent thermal resistance. STAINLESS STEEL Offers very high shearing resistance, also used under thermal conditions.

NITRISNAKE Calendered nitrile coating; the surface is comparable to snakeskin. This process provides excellent grip under greasy and damp conditions. NITRITECTM This nitrile coating has microscopic asperities, very substantillay improving and reinforcing the products grip. ZIRNIUMTM Concept of high-tenacity thread developed by Rostaings R&D department.

PVC Polyvinil Chloride.

POLYPROPYLENE A synthtic water-repellent, supple and comfortable material.

PREMIUM Concept of threads made of polyamide and composite fibreglass. ALUMINISE Aluminium backed with para-aramide flannelette. ARMORFRAME Concept of high tenacity fibers reinforced by stainless steel fiber.

POLYURETHANE A supple synthetic material that is abrasion-resistant and breathable.

ARMORFRAME

POLYESTER A synthetic material that is resistant to abrasion and tearing.

POLYAMIDE A synthetic material that is resistant to abrasion and tearing, as well as to heat, up to 150C.

WOOL A natural fibre that is supple and soft. Has good insulating capacity and natural fireproofing.

ARAMIDE

ARAMIDE Material made with a mix of meta-aramide and para-aramide.

VEROST Woven fibreglass coated with silicone.

NITRILE A supple synthetic material that is resistant to chemicals and grease. LATEX A natural, supple material that is resistant to abrasion.Chloroprne

WATER BASED POLYURETHANE Synthetic material resistant to abrasion, not treated with solvents. CHLOROPRENE Synthetic material.

SAFERGRIP Textile/Silicone mesh complex that withstands extreme heat and cold. SUPRAMET Mix of fibreglass and ceramics.

NITFOAM Air is pre-injected into this nitrile coating, to incorporate foam into it. This process gives the nitrile extensive flexibility and breathability.

PORELLE PU membrane providing waterproofness, breathability (vapour transfer), blood borne pathogen resistance and viral and chemical protection. POLYCARBONATE Synthetic material that offers a very high resistance to chocks and deformations.

10

11

Legal European StandardsROSTAING GUARANTEES QUALITY AND COMPLIANCE WITH EUROPEAN STANDRADSOBLIGATIONS POUR LEMPLOYEURThe employer is required to: Provide, free of charge and for personal use, Personal Protective Equipment (PPE) in compliance with regulations and appropriate for the work to be performed. Verify the correct choice of PPE based on analysis of the hazards to be covered and on the performance offered by the equipment. Ensure effective use of the PPE : inform the personnel in charge of its implementation and maintenance and ensure that the equipment functions properly. Inform the users of the users of the hazards against which the PPE protects them, of the conditions of use and of provision, and of all instructions and directions. Provide the users with training and practice for wearing the PPE.

ISO 13997 StandardTDM slice testThe new version of the EN388 2003 standard has integrated another test method (in line with the international standard ISO 13997) performed by a TDM machine. This test method may be used in addition to the couptest according to the EN388 2003 standard for performance levels 4 or over. EN388 2003: The cut index is calculated according to the number of cycles needed to cut through the sample. ISO 13997 - TDM : The cut index is calculated according to the force necessary to slice the sample while moving the blade over the fabric for at least 20 mm. The blade is changed with each test. The requirements for obtaining a level five performance in this test are more stringent than those of the EN 388 2003 standard. Hence this slice test method guarantees a cut resistance level that is in line with the products use.

THE NOTIFIED BODIES:(Having performed tests on Rostaing gloves)

INSTRUCTION FOR USEBefore each time protective gloves are used, the user must be informed of their conditions of use as well as of the type of hazards against which they protect, in order to verify that they correspond properly to the work to be performed. A users guide is enclosed with the smallest packaging component or the The letter i in the pictogram featured in the marking on the glove indicates the obligation to read the manufacturers instructions. Our customer service department is available to provide additional information on European Standards: Rostaing Industrie tel : +33 (0) 4 74 46 07 15 fax : +33 (0) 4 74 61 34 43

C.T.C. N 0075 Centre Technique du Cuir MECHANICAL HAZARDS I.F.T.H N 0072 Institut Franais Textile et Habillement THERMAL HAZARDS COLD HAZARDS MECHANICAL HAZARDS

TYPE II and TYPE III glovesFIGURE KEYX........................................... Untested perfomance level 0 .......................................... Nil 1 .......................................... Minimum 2 .......................................... Good 3 .......................................... Very good 4 and + ............................. Excellent

EN 511: COLDCONVECTIF COLD (4) CONTACT COLD (4) WATERPROOFING (1)

Cut resistance: EN 388level

Cut resistance: ISO 13997level level

22X

3

4

4

4 = 13 N

level

level

5

5

5 = 22 N

22X

EN 420: GENERAL REQUIREMENTS FOR PROTECTIVE GLOVES No chromium (2 mg/kg) Neutral pH Dexterity, comfort Transmission and absorption of water vapour.

EN 374: CHEMICALS AND MICRO-ORGANISMS 374.1 : Chemical resistance 374.2 : Resistance to penetration 374.3 : Resistance to permeation

chemical hazards

microbiological hazards

EN 388: MECHANICAL HAZARDSABRASION (on 4 levels) SLICING (on 5 levels) TEARING (on 4 levels) PERFORATION (on 4 levels)

EN 381-7: HANDLING CHAINSAWS

2122

2122

The ISO13997 standard slicing test guarantees a cut resistance level that is perfectly in line with the products use.

EN 407: THERMAL HAZARDSBURNING BEHAVIOUR (4) CONTACT HEAT (4) CONVECTIVE HEAT (4) RADIANT HEAT(4) SMALL SPLASHES OF MOLTEN METAL (4) LARGE SPLASHES OF MOLTEN METAL (4)

EN 659: PROTECTIVE GLOVES FOR FIREFIGHTERS

42XX4X42XX4X

12

13

CUT RESISTANCEChoosing protection against cuts is both complex and tricky. It requires analysis of the workstation and testing.

+

TDM LEVEL 5 / EN 388 LEVEL 5

To provide solutions, we have developed concepts of original threads: ARMORFRAME,

EXCELLENT CUT RESISTANCE. OPTIMAL MECHANICAL STRENGTH. WEAR INDICATOR FOR OPTIMAL SAFETY.ARMORFRAME

CUT RESISTANCE

DYNEEMA/INOX, ZIRNIUMTM, PREMIUM. Moreover, thanks to the support of our partners DYNEEMA, TWARON, ARCELOR and SAINT-GOBAIN, we offer several ranges of products classified in decreasing levels of cut resistance.

A good balance of performance levels guarantees the gloves durability.

New glove resistan

Level c5 eUsed glove

Thus, when choosing gloves, it is crucial to bear in mind454X

the abrasion, cut and tear resistance as well as their washability.

VISIOCUT

ISO 13997 - TDM

Resistance to slicing LEVEL 5/5

Level c3 eresistan

Cleaning must be performed by our selected cleaners.

Use: Mechanical industries (Automotive industry, rail, aeronautics etc.) Handling metal parts (Stamping, iron plating etc.) Glass industry, plastics processing (Flashing etc.) Conditioning and packaging sector. Material:

ARMORFRAMEKnitted glove made with high-tenacity Dyneema/Stainless Steel fibre. Orange wear indicator on the inside. Reinforcement seam between the thumb and index finger. Length 25 cm. Available sizes: 6/7/8/9/10/11. Care: 14

Version with PVC dots on the palm available. ref:

VISIOCUTGRIP

15

CUT RESISTANCE

+

TDM LEVEL 5 / EN 388 LEVEL 5

CUT RESISTANCE

+

+

TDM LEVEL 5 / EN 388 LEVEL 5

TDM TEST LEVEL 5. OPTIMAL MECHANICAL STRENGTH. SUPPLE, COMFORTABLE.

TDM TEST LEVEL 5. OPTIMAL MECHANICAL STRENGTH. COMFORTABLE. EXCEPTIONAL GRIP IN OILY CONDITIONS.

TDM TEST LEVEL 5. OPTIMAL MECHANICAL STRENGTH. COMFORTABLE. EXCEPTIONAL GRIP IN OILY CONDITIONS.

ARMORFRAME

TDMCUT5454X

ISO 13997 - TDMResistance to slicing LEVEL 5/5

TDMTOP54543

ISO 13997 - TDMResistance to slicing LEVEL 5/5

TOPTOLIER4543Material:

ISO 13997 - TDM

Resistance to slicing LEVEL 5/5

Use: Stamping, glass industry, steel industry.

Use: Stamping, glass industry, steel industry.

Use: Stamping, glass industry, steel industry.

Material:

Material:

ARMORFRAME ARMORFRAMEKnitted glove made with composite fibres. Palm reinforced with split leather (Thickness 1.1 mm). Seam between the thumb and index finger reinforced by a welt. Length 35 cm, including a 10cm cotton canvas cuff. Available sizes: 7/8/9/10/11. Care: Available in 35 cm with cuff equipped with thumb hole. ref:

ARMORFRAMEKnitted glove made with high-tenacity Dyneema/Stainless Steel fibre. Length 25 cm. Available sizes: 6/7/8/9/10/11. Care:

Knitted glove made with high-tenacity Dyneema/Stainless Steel fibres. Palm reinforced with cowhide leather. Seam between the thumb and index finger reinforced by a welt. Length 25 cm. Available sizes: 7/8/9/10/11. Care:

Version with PVC dots on the palm available. ref: 16

TDMGRIP5

TDMCUFF35PO17

CUT RESISTANCE

+

TDM LEVEL 5 / EN 388 LEVEL 5

CUT RESISTANCE

+

+

TDM LEVEL 4 / EN 388 LEVEL 5

+

TDM TEST LEVEL 5. MAXIMUM MECHANICAL STRENGTH. HEAVY DUTY. CANVAS ON THE BACK FOR GREATER DEXTERITY. GOOD RESISTANCE TO PERFORATION.

TDM TEST LEVEL 5. MAXIMUM MECHANICAL STRENGTH. HEAVY DUTY, BACK MADE OF LEATHER. GOOD RESISTANCE TO PERFORATION.

EXCELLENT DEXTERITY, SOFT AND COMFORTABLE, VERSATILE. OPTIMAL MECHANICAL STRENGTH. REINFORCEMENT SEAM BETWEEN THE THUMB AND INDEX FINGER.

GOOD GRIP IN GREASY, DRY OR WET CONDITIONS. OPTIMAL MECHANICAL STRENGTH. SEAMS REINFORCED WITH A SPECIAL ASSEMBLING TECHNIQUE. COMFORTABLE.

HIGHSTAMP+ / TOLERIE4544Use: All high-risk metal or glass working conditions.

NEWTOLERIE4544Use: All high-risk handling of sharp parts. Stamping, sheet metal working, assembly.

MASTERCUT+454X X1XXXXUse: Stamping, iron plating, glass-making, cartons and plastics handling. Automotive and packaging industries.

MASTERTOP4543 X1XXXXUse: Glass industry, plastics industry, metal industry, assembly (automotive industry, rail, aeronautics).

Material:

Material:

Material:

Material:

Glove liner knit with Dyneema/Stainless-Steel fibres. Palm, fingers and cuff made with enriched split leather. Back made from cotton canvas. Length 36 cm including a 15 cm cuff. Available sizes: 7/8/9/10/11. Care:

Glove liner knitted with Dyneema/Stainless-Steel fibres. Palm, fingers and back made with enriched split leather. Length 36 cm including a 15 cm canvas cuff. Available sizes: 7/8/9/10/11. Care:

Knitted glove made with ZirniumTM thread. Reinforcement seam between the thumb and index finger. Length 25 cm. (a 30-cm version is available). Available sizes: 6/7/8/9/10/11. Care:

Knitted glove made with ZirniumTM yarn. Palm reinforced with split leather. Seam between the thumb and index finger reinforced by a welt increasing the gloves durability by 30%. Length 25 cm. Sewn with Kevlar thread. Available sizes: 7/8/9/10/11. Care:

Available with dots on the palm. ref: 18

MASTERGRIP+

19

CUT RESISTANCE

+

TDM LEVEL 4 / EN 388 LEVEL 5

CUT RESISTANCE

+

+

TDM LEVEL 4 / EN 388 LEVEL 5

BREATHABLE. EXCEPTIONAL GRIP IN OILY CONDITIONS. EXCELLENT MECHANICAL STRENGTH.

DOUBLE SEAM REINFORCEMENT,IMPROVED DURABILITY

BREATHABLE. EXCEPTIONAL GRIP IN OILY CONDITIONS. EXCELLENT MECHANICAL STRENGTH.

EXCELLENT COMFORT AND DEXTERITY. MAXIMUM ABRASION RESISTANCE. MAXIMUM CUT RESISTANCE. BREATHABLE.

MASTER1CRF/L4542Use: Handling of glass, metal, cardboard and plastics. Automotive industry, iron plating, stamping. Assembly, aeronautics, rail, naval.

MASTER1CR15M4543 X1XXXXUse: Handling of sharp parts in oily and abrasive conditions. Automotive industry, iron plating, stamping. Assembly, aeronautics, rail, naval. Material:

MASTERPU4542Use: Handling of sharp and moderately oily parts. Automotive industry, assembly, transport, aeronautics. Material:

Material:

Knitted glove made with ZIRNIUMTM thread. Palm reinforced with pill-resistant full grain leather. Reinforced seam between thumb and index finger. Length 40 cm, including cotton canvas cuff. Available sizes: 7/8/9/10/11. Care: Available in 25 cm, without cuff. ref: 20

Knitted glove made with ZIRNIUMTM thread. Palm and back of fingers reinforced with split leather. Seam between thumb and index finger reinforced with welt and double stitching. Length 31 cm, including cotton canvas cuff. Available sizes: 7/8/9/10/11. Care:

Knitted glove made with ZIRNIUMTM fibres. Grey polyurethane coating on palm and fingertips. Length 25 cm. Available sizes: 7/8/9/10/11. Care: Available in 30 cm. ref: MASTERPU30

MASTER1CRX

21

CUT RESISTANCE

+

TDM LEVEL 4 / EN 388 LEVEL 5

CUT RESISTANCE

+

TDM LEVEL 4 / EN 388 LEVEL 5

WATER BASED PU, NOT TREATED WITH SOLVENTS. GOOD DEXTERITY, COMFORTABLE, OIL RESISTANT. EXCELLENT MECHANICAL STRENGTH.

OPTIMAL DEXTERITY. EXCEPTIONAL GRIP IN GREASY AND OILY CONDITIONS. EXCELLENT MECHANICAL STRENGTH.

MASTERWATERB4542Use: Handling sharp and oily objects. Assembly, Automotive Industry, Iron Plating, Stamping, Equipment construction Bar turning. Material:

MASTERNBR4544Use: Handling parts in oily conditions that require good dexterity. Material:

Knitted glove made with ZIRNIUMTM fibres. Water based polyurethane coating on the palm and fingertips. Length 25 cm. Available sizes: 6/7/8/9/10/11. Care:

Knitted glove made with ZIRNIUMTM threads. Special nitrile coating on the palm and fingertips. Length 25 cm. Available sizes: 7/8/9/10. Care:40

22

23

CUT RESISTANCE

+

TDM LEVEL 4 / EN 388 LEVEL 5

CUT RESISTANCE

+

EN 388 LEVEL 4

EXCELLENT MECHANICAL STRENGTH. OIL RESISTANT. EXCELLENT GRIP, COMFORTABLE.

GOOD DEXTERITY, COMFORTABLE, OIL RESISTANT. WATER BASED PU, NOT TREATED WITH SOLVENTS. EXCELLENT MECHANICAL STRENGTH.

MASTERNIT4543Use: Handling sharp and oily objects. Automotive industry, steel industry, mechanics, construction. Material:

WATERCUT44443Use: Handling sharp and oily objects. Assembly, Automotive Industry, Iron Plating, Stamping, Equipment construction Bar turning. Material:

Knitted glove made with ZIRNIUMTM threads. Nitrile coating on the palm and fingerbacks. Length 25 cm. Available sizes: 7/8/9/10. Care:40

Knitted glove made with Dyneema/polyamide fibres. Water based polyurethane coating on the palm and fingertips. Length 25 cm. Available sizes: 6/7/8/9/10/11. Care:

24

25

CUT RESISTANCE

+

EN 388 LEVEL 4

CUT RESISTANCE

+

EN 388 LEVEL 4

HIGH DEXTERITY IN WET CONDITIONS LIGHT, COMFORTABLE, RESISTANT. HIGH PERFORMANCE DYNEEMA FIBRES. BREATHABLE AND COOL.

VERY GOOD DEXTERITY. COMFORTABLE, EXCELLENT GRIP. REINFORCED SEAM BETWEEN THUMB AND INDEX FINGER.

DYNAFLEXAIR / ZDYPU25/014443Use: Handling sharp and slightly oily parts. Automotive industry. Iron plating. Stamping. Equipment construction. Bar turning. Material:

PRIMAGRIP144XUse: Handling glass, metal, cardboard with Stanley Knife, and plastics. Dry conditions. Automotive industry, Iron Plating, Stamping, Assembly. Material:

Knitted glove made from Dyneema/polyamide fibres. Polyurethane coating on the palm and fingertips. Length 25 cm. Available sizes: 6/7/8/9/10/11. Care: A fully coated version is available. ref: 26

Knitted glove made with PREMIUMTM threads. Reinforced seam between thumb and index finger to improve the gloves durability by 25 %. PVC dots on one side. Length 25 cm.

DYNAGFLEXAIR

Available sizes: 7/8/9/10/11. Care:40

Available without dots. ref:

PRIMACUT

27

CUT RESISTANCE

+

EN 388 LEVEL 4

CUT RESISTANCE

+

EN 388 LEVEL 4

As cuffs are not certified as PPE, the performance levels are given as indications only.

+

EXCELLENT GRIP IN OILY CONDITIONS. BREATHABLE, COMFORTABLE, GOOD DEXTERITY. GOOD MECHANICAL STRENGTH.

EXCELLENT MECHANICAL STRENGTH. COMFORTABLE.

FOREARM PROTECTION. THUMB HOLE. COMFORTABLE.

PRIMATOP4443 X1XXXXUse: Handling glass, metal, cardboard, and plastics. Automotive industry, Iron plating, Stamping. Assembly. Material:

NEWTOLERIE34443Use: Steel industry, foundry, automotive industry.

PRIMACUFF35PO144XUse: Cut resistant cuff: assembly, automotive industry, cosmetics, glass works.

Material:

Material:

Knitted glove made with PREMIUMTM threads. Palm reinforced with split leather (Thickness 1,1 mm). Seam between thumb and index finger reinforced by a welt. Length 25 cm. Available sizes: 7/8/9/10/11. Care:

Available in leather with no wrap over between the fingers. ref:

Glove liner knitted with PREMIUMTM threads. Enriched leather glove. Length 36 cm, including a 15 cm canvas cuff. Available sizes: 7/8/9/10/11. Care:

Knitted cuff made from PREMIUMTM. Length 35 cm. Available in sizes: Unique. Care:

PRIMA1CR

Available in 45 cm. ref:

PRIMACUFF45PO

28

29

CUT RESISTANCE

+

EN 388 LEVEL 3

CUT RESISTANCE

+GOOD DEXTERITY. EXCELLENT GRIP. DYNEEMA FIBRE. BREATHABLE.

EN 388 LEVEL 3

+

GOOD DEXTERITY, COMFORTABLE, OIL RESISTANT. WATER BASED PU, NOT TREATED WITH SOLVENTS. EXCELLENT MECHANICAL STRENGTH.

OIL AND GREASE REPELLENT. SUPPLE, COMFORTABLE AND STRONG. DYNEEMA FIBRE. BREATHABLE.

WATERCUT34343Use: Handling sharp and oily objects. Assembly, Automotive Industry, Iron plating, Stamping, Equipment construction, Bar turning. Material:

DYNAAIR / ZDYBPU25/014343Use: Handling sharp and slightly oily parts. Automotive industry. Iron plating. Stamping. Equipment construction. Bar turning.

DYNAGAIR4343Use: Maintenance, assembly, rolling, building work and all types of highly abrasive work.

Material:

Material:

Knitted glove made with Dyneema/polyamide threads. Water based polyurethane coating on the palm and fingertips. Colour: mottled blue. Length 25 cm. Available sizes: 6/7/8/9/10/11. Care:

Knitted glove made with Dyneema/polyamide threads. Polyurethane coating on the palm and fingertips. Length 25 cm. Available sizes: 7/8/9/10/11. Care:

Knitted glove made with Dyneema/ Polyamide fibre. Polyurethane coating on the palm and back. Length 25 cm. Available sizes: 7/8/9/10. Care:

30

DYNALONGAIR / ZDYBPU30/01Available in 30 cm. ref:

31

CUT RESISTANCE

+

EN 388 LEVEL 3

CUT RESISTANCE

+

+

EN 388 LEVEL 3

As cuffs are not certified as PPE, the performance levels are given as indications only.

+

ANTI-SLIP. GOOD DEXTERITY. RESISTANT TO OIL AND GREASE. DYNEEMA FIBRE.

RESISTANT TO OIL AND GREASE. SOFT, COMFORTABLE, STRONG. DYNEEMA FIBRE.

FOREARM PROTECTION. DYNEEMA FIBRE. WICKS AWAY MOISTURE. THUMBHOLE. COOL SENSATION, EXTREMELY COMFORTABLE.

FOREARM PROTECTION. DYNEEMA FIBRE. WICKS AWAY MOISTURE. THUMBHOLE. COOL SENSATION, EXTREMELY COMFORTABLE.

DYNANIT / ZDYNI25/014343Use: Handling sharp objects in slightly oily conditions. Assembly, Bar turning, Maintenance, Sheet metal working.

DYNAGNIT4343Use: Maintenance, assembly, rolling, construction, all types of highly abrasive work.

DYNACUFF35PO/ MZDY35/01PO134XUse: Cut-resistant protection cuff: assembly, automotive industry, cosmetics, glass industry.

DYNACUFF45134XUse: Cut-resistant protection cuff: assembly, automotive industry, cosmetics, glass industry.

Material:

Material:

Material:

Material:

Knitted glove made with fine Dyneema/polyamide. Supple black nitrile coating on the palm and fingertips Length 25 cm. Available sizes: 6/7/8/9/10/11. Care:40

Knitted glove made from Dyneema/polyamide. Nitrile coating on the palm and fingertips. Length 25 cm. Available sizes: 7/8/9/10. Care:40

Knitted cuff made with Dyneema/polyamide. Length 35 cm. Available in sizes: Unique. Care:

Knitted cuff made with Dyneema/polyamide. Length 35 cm. Available in sizes: Unique. Care:

32

33

CUT RESISTANCE

+

EN 388 LEVEL 3

CUT RESISTANCE

+

+

EN 388 LEVEL 3

+

GOOD DEXTERITY. EXCELLENT ABRASION RESISTANCE. GOOD GRIP IN OILY CONDITIONS.

GOOD DEXTERITY. EXCELLENT ABRASION RESISTANCE. GOOD GRIP IN OILY CONDITIONS.

GOOD DEXTERITY. BETTER PROTECTION WITH WRAPOVER ON FINGERTIPS. SUPPLE AND COMFORTABLE. EXCELLENT GRIP.

WASHABLE LEATHER, VERY SUPPLE. WRIST PROTECTOR. NO SEAM BETWEEN THUMB AND INDEX FINGER FOR IMPROVED COMFORT. GOOD CUT RESISTANCE.

PRIMAPU433XUse: Handling sharp and slightly oily parts. Automotive Industry, Iron plating, Stamping, Equipment construction, Bar turning.

PRIMAGPU433XUse: Handling sharp and slightly oily parts. Automotive Industry, Iron plating, Stamping, Equipment construction, Bar turning.

1CRXZDY01R154342Use: Handling rolled metal and glass tubes, using a Stanley Knife.

WETCUT/012342Use: Handling sharp parts in oily and wet conditions. Construction sites, linemen, cabling.

Material:

Material:

Material:

Material:

Knitted glove made with PREMIUMTM fibres. Grey polyurethane coating on the palm and fingertips. Length 25 cm. Available sizes: 6/7/8/9/10/11. Care:

Knitted glove made with PREMIUMTM fibres. Grey polyurethane coating on the palm and fingertips. Length 25 cm. Available sizes: 6/7/8/9/10. Care:

Gloves knitted with Dyneema/polyamide fibres in mottled blue. Goat skin palm reinforcements continue over the back of the fingers (Thickness 0.6 m). Length 25 cm. Available sizes: 7/8/9/10/11. Care:

Leather glove, water-repellent for 100 minutes. Glove liner knitted with Dyneema/Polyamide. Wrist protection, elastic wrist strap. Length 26 cm. Available sizes: 7/8/9/10/11. Care: Available with split leather on the back. ref: WETCUT/03

34

35

HEAT RESISTANCEThe complexity of heat flows and behaviours necessitates extensive research.

600C / 800C and +

+

+EXCELLENT RESISTANCE TO DIRECT CONTACT WITH HEAT, FIRE AND FLAMES.

OPTIMAL STRENGTH, STAINLESS-STEEL THREAD SEAMS. EXCELLENT FIRE AND CONTACT-HEAT BEHAVIOUR.

In partnership with the INSA, ITECH and ENSAIT engineering

HEAT RESISTANCE

schools and with the French National Scientific Research Centre (CNRS), as well as with the laboratories of the IFTH and the CTC, we have developed over 250 products. Each one is specially adapted to a profession. They all meet the requirements for heat and fire hazards, and comply with the EN 407 standards.

We also develop our products in partnership with our customers, in order to fully integrate all the needs related to their use.

B7VERD / HIGHTEMP8002X4X 44XXXXUse: Glass industry, Steel industry, Foundry.

B7SUPVERD2X4X 44XXXXUse: Glass industry, Steel industry, Foundry.

Material:

Material:

Mitten and cuff made with VEROST fabric. Mitten fully lined with triple-component lining (glass, aramid fibre, Proban). Thumb reinforced by a special cord made of VEROST. Stainless Steel thread seams. Length 40 cm. Available in sizes: Unique. Care:

Mitten and cuff (25 cm) made with VEROST fabric. Mitten fully lined with triple-component lining (glass, aramid fibre, Proban). Thumb reinforced by a special cord made from VEROST. Thumb and palm reinforcement made from SUPRAMET. Stainless Steel thread seams. Length 50 cm. Available in sizes: Unique. Care: 37

36

HEAT RESISTANCE350C / 500C

HEAT RESISTANCE

+

+EXCELLENT HEAT BEHAVIOUR. GOOD RESISTANCE TO CONTACT-HEAT BEHAVIOUR.

350C / 500C

+

+FIRE RESISTANT. PROTECTIVE CUFF. EXCELLENT GRIP. WATERPROOF.

EXCELLENT CUT RESISTANCE LEVEL. FAST INTERNAL HEAT REMOVAL. FOREARM PROTECTION. GOOD DEXTERITY FOR HANDLING HOT PARTS.

EXCELLENT PROTECTION FROM CUTS. EXCELLENT BEHAVIOUR TO FIRE AND CONTACT HEAT.

SANDOU2441

44XXXX

KBKV7D1L/5502542 4343XXUse: Handling hot parts. Steel industry, metallurgy.

VCAN18112544 44XXXXUse: Handling hot parts. Metallurgy, Foundry, Glass industry, Kilns, Stoves, Heat treating.

CLAIR25Q3533 44XXXXUse: Handling sharp, moderately hot parts in wet conditions. Maintaining and replacing street lighting.

Use: Handling hot parts. Steel industry, foundry, automotive industry.

Material:

Material:

Material:

Material:

ARAMIDEPalm and thumb made of 550g/m2 para-aramid loop pile fabric. Back made of split leather (thickness 1.1 mm). Length 39 cm including cuff length of 15 cm made of split leather. Available sizes: 8/9/10/11. Care: Glove made of 550g/m2 para-aramid loop pile fabric. Lining made of cotton loop pile fabric 760g/m2. Length 33 cm including cuff length of 10 cm made of split leather and lined with a thin canvas. Available in sizes: 10. Care:

ARAMIDEMitten made of 550g/m2 para-aramid loop pile fabric. Mitten fully lined with triple-component lining (woollen fleece/ aramid /acrylic). Length 50 cm. Available in sizes: Unique. Care: Palm, fingers and thumb made of coated para-aramid fabric, lined with brush-finished para-aramid fleece. Back made of brush-finished par-aramid. Glove lined entirely with acrylic/cotton fleece. Length 43 cm, including 20 cm cuff made of a heat-resistant layer. Available sizes: 8/9/10/11. Care:

Available with reverse-side loop pile fabric and cuff.25 cm. ref: 38

SANDOUR/M25

39

HEAT RESISTANCE200C / 350C

HEAT RESISTANCE250C

+

+

INFLAMMABLE MATERIAL. EXCELLENT GRIP. EXCELLENT MECHANICAL STRENGTH.

SUPPLE. RESISTANT TO INCANDESCENT PARTICLES. RESISTS A HEAT OF UP TO 250 C.

ARAMIDE

WARMB250/43D24 431 43324XUse: Handling hot and sharp objects. Foundry. Welding. Glass works. Material:

WELD250D8-VL4541 42344XUse: Welders. Against radiating heat. Material:

ARAMIDEPalm, fingers and inner thumb made of coated para-aramid fabric. Back, thumb back and cuff made of split leather. Glove lined with acrylic and cotton. Palm lining reinforced with aramid felt. Thumb welt, wrist grip strap. Length 43 cm including a cuff of 23 cm. Available sizes: 8/9/10/11. Care: Palm, fingers and inner thumb made of coated para-aramid fabric. Back and thumb back made of para-aramid aluminised fabric. Gloved lined with para-aramid fleece. Length 33 cm. Available sizes: 8/9/10/11. Care:

40

41

COLD RESISTANCE- 30COur experience, combined with that of the professors of the INSA engineering school, has enabled us to develop products that are truly effective in

+

SELF HEATING AND RECHARGEABLE. INTEGRATED HEAT DIFFUSER, 2 TO 4 HOURS CHARGE. VERY WARM FOR COMFORT.

COLD RESISTANCE

protecting against the cold.

The choice of raw materials, as well as their integration in the glove, is essential.

Our technical sales representatives and engineers are receptive to users feedback, in order to constantly offer innovative, well-adapted products that deliver comfort, resistance and cost control.

HEATING GLOVEUse: Work in extremely cold conditions. Cold Industry. Work in a mountain environment. Material:

Leather, polyamide and polyester. Comes with a heating element, batteries and double charger. 50 x 3 min of heating cycles. Both gloves charge simultaneously with one single charger. Shock resistant. Resistive heating fabric. Available sizes: 7/8/9/10. Care: Cleaning not recommended. 42Batteries

ON/OFF button (visible)

Heating fabric Charge socket

43

COLD RESISTANCE- 30C

COLD RESISTANCE

+

+SUPPLE, COMFORTABLE, GOOD DEXTERITY. EXCELLENT GRIP.

0C

+

+AMBIDEXTROUS. VERY COMFORTABLE AND SOFT. DOUBLE THICKNESS KNITTING.

HEAVY DUTY. EXCELLENT ABRASION RESISTANCE.

SOFT, COMFORTABLE, BREATHABLE. WRIST STRAP. WATER-REPELLENT LEATHER.

HPSCO30D3 / FRIDGE4133 22XUse: Handling in a cold environment. Forklift truck driver, warehouse worker, refrigerated transportation, cold chambers.

COLD30D34221 22XUse: Handling in a cold environment. Forklift truck driver, warehouse worker, refrigerated transportation, cold chambers.

HPS7D4BC2122Use: General outdoor handling. Civil engineering, construction.

Protection de type I

ZPP25 / THERMALIGHT

Use: Refrigerated warehouse, glove liner for handling Warehouse worker. May be worn as a glove liner.

Material:

Material:

Material:

Material:

Palm and thumb made of oil and water-repellent split leather (Thickness 1.3 mm). Back made of water-repellent full grain leather (Thickness 1 mm). Lining made of foamback/wool. Tightening elastic on the back. Length 30 cm. Available sizes: 7/8/9/10/11. Care:

Glove made of silicone-coated cotton in blue. Lining made of foamback/wool. Tightening elastic on the back. Length 30 cm. Available sizes: 8/9/10/11. Care:

Full grain leather glove, water repellent for 100 min Lined with acrylic/cotton fleece. Length 25 cm. Available sizes: 7/8/9/10/11. Care:

Knitted with polypropylene and latex fibres. Length 25 cm. Available sizes: 6/7/8/9/10/11. Care:40

Version with dots on the palm available. ref: 44

ZPP25P

45

PROFESSIONSTo each profession its glove! ROSTAING is the specialist of custom design.

CRYOGENICS - 197C )

Model certified suitable for submersion in liquid nitrogen (IFTH MR 019 method).

+

+WATERPROOF AND BREATHABLE. REMAINS SUPPLE IN EXTREME TEMPERATURES. ELASTIC WRIST STRAP.

WATERPROOF AND BREATHABLE. REMAINS SUPPLE IN EXTREME TEMPERATURES. LENGTH 40 CM.

The PROFESSIONAL range

PROFESSIONS

encompasses more than 300 different models, developed over the past 60 years of design.

Our 2010 catalogue presents a few of our new features.

BLUECRYO403111 221Use: Cryogenic handling. Blast and ultra-low temperature freezers, hospitals and laboratories.

BLUECRYOBC3111 221Use: Cryogenic handling. Blast and ultra-low temperature freezers, hospitals and laboratories.

Material:

Material:

Glove made of SAFERGRIP fabric lined with woollen fleece, with microporous insert. Length 40 cm including a 15 cm cuff. Available sizes: 9/10/11. Care:

Glove made of SAFERGRIP material lined with wool fleece and microporous insert. Wrist strap. Length 29 cm. Available sizes: 9/10/11. Care:

46

47

PROFESSIONS

CRYOGENICS - 197C )

Model certified suitable for submersion in liquid nitrogen (IFTH MR 019 method).

METIERS

+

+WATERPROOF COATING, BREATHABLE. WRIST GRIP AND TIGHTENING STRAP.

WELDING )

+

GOOD THERMAL INSULATION. MATERIAL SUPPLE IN EXTREMELY COLD CONDITIONS. ADJUSTABLE WRIST STRAP.

COMFORTABLE. FOREARM PROTECTION. TWARON AND COTTON LINING.

T.CRYOUse: Cryogenic handling. Hospitals, laboratories.

CRIO2122

221

EM7ED10KEV2222 41XXXXUse: Tungsten arc welding of stainless steel or aluminium tubing. Material:

Use: Cryogenic handling. Hospitals, laboratories.

Material:

Material: Full grain lambskin (Thickness 0.6mm). Para-aramid cotton lining. Length 36 cm including a 15 cm cuff made of leather.

Apron made from SAFERGRIP with wool-fleece lining. Adjustable with a sliding plastic loop and clip fastener. Dimensions: 70 x 90 cm. Available in sizes: Unique. Care:

Glove and thumb reinforcement made from water-repellent, full grain leather. Wool fleece lining and microporous absorbent insert. Tightening strap on the cuff. Length 40 cm including a 15 cm split leather cuff. Available sizes: 9/10/11. Care:

Available sizes: 7/8/9/10/11. Care: Available without lining. ref:

EM7EKEV

48

49

PROFESSIONS

ANTI VIBRATIONS )

PROFESSIONS

+

CONSTRUCTION )

+

REDUCES VIBRATIONS. GREAT COMFORT, SUPPLE.

NEW PREMIUM FIBRE. MECHANICAL STRENGTH. WRIST GRIP AND TIGHTENING STRAP. SUPPLE, COMFORTABLE.Chloroprne

VIBRAPROTECTX243Use: Civil engineering, masonry, woodwork, flooring, machinery operators, power tools. Material:

MACPRO3543Use: Specially adapted for all types of construction work and projects. Material:

ChloroprneKnitted glove made of 100% cotton. Chloroprene coating on palm and fingers. Length 25 cm. Available sizes: 8/9/10. Care: Knitted with shear-resistant thread. Coating in ultra supple latex with micro grip finish to protect against industrial injury. Coating continues over the back of the hand to improve water tightness. Self-fastening wrist strap. Length 28 cm. Available sizes: 8/9/10/11. Care:The Professional Organisation for Safety in Construction and Civil Engineering

Gloves designed in partnership with:

Confederation of Crafts and Small Construction Companies

50

51

PROFESSIONS

CONSTRUCTION /FINISHING WORK )

PROFESSIONS

+

+

ANTI-PUNCTURE )

+

GOOD DEXTERITY. COMFORTABLE. SELF-FASTENING WRIST GRIP.

COMFORTABLE. PROTECTS AGAINST THE COLD.

HIGH PUNCTURE RESISTANCE. OPTIMAL MECHANICAL STRENGTH. WATER AND OIL RESISTANT. WRIST PROTECTOR. LEATHER WITH EXCELLENT ABRASIVE RESISTANCE.Specially selected leathers. High puncture resistance. The leather is treated specifically for this purpose and the cut is carefully selected.

CARPRO4121Use: Construction work. Finishing work, Specially designed for tile work.

COLDPRO2242 X2XUse: Protective glove for assembly work performed in a cold environment.

RIPEURCO / STRONGER+454 4Use: Handling in oily and greasy conditions. Scrub clearing, resistant to punctures from syringes, Litter collection, Outdoor work. Material:

Material:

Material: Palm, fingers and back in split leather. Oil resistant for 60 minutes and water resistant for 100 minutes. Thickness 1.3 mm. Glove liner made from Dyneema/Inox fibres. Length 27 cm including a 7 cm cuff made of resistant canvas. Available sizes: 8/9/10/11. Care:

Glove made from light orange polyamide fabric with black nitrile coating. Coating continues over the back of the hand to ensure better water tightness. Self fastening wrist grip. Length 25 cm. Available sizes: 8/9/10/11. Care:40

Knitted glove made with acrylic loop pile fabric. Black latex coating. Double knit with loop pile lining for comfort and protection against the cold. The latex coating is water resistant. Length 25 cm. Available sizes: 8/9/10/11. Care:

52

53

PROFESSIONS

GLASS WORKS )

PROFESSIONS

+

GLASS WORKS )

+

+SUPPLE, COMFORTABLE. GOOD THERMAL PROTECTION. GOOD PROTECTION AGAINST CUTS.

EXCELLENT GRIP IN WET OR DRY CONDITIONS. AERATED BACK. HEAVY DUTY.

EXCELLENT ABRASION RESISTANCE. PALM REINFORCEMENT. COMFORTABLE, EXCELLENT GRIP. WATERPROOF AND BREATHABLE MEMBRANE.

GRIPGLASS / KVLA25/0234 43Use: Handling in abrasive or sharp conditions. Cutting and handling glass sheets. Foundry. Finishing. Handling safety barriers and rails. Metal work. Material:

IMPERVHOCK354433Use: Working and cutting glass.

STR50MKT10434X X2XXXXUse: Handling hot parts (250C). Dry conditions. Foundries and glass works.

Material:

Material:

Knitted glove made from 100% TWARON. Palm coated with anti-slip (aerated) latex. Length 25 cm. Available sizes: 8/9/10/11. Care:

Palm, fingers and palm reinforcement made from oil and water-repellent split calfskin (Thickness 1 mm). Back and thumb back made from microporous canvas. Lining and insert made from para-aramid cotton. Thumb seam reinforced by a black cord. Tightening elastic on the back. Length 35 cm. Available sizes: 8/9/10/11. Care:40

Glove knitted with polyamide, polyester and cotton thread. Length 33 cm, including a 10 cm cotton canvas cuff. Available sizes: 8/9/10. Care:40

54

55

PROFESSIONSFORESTRY )

PROFESSIONS

+

+BREATHABLE WATER-REPELLENT LEATHER. REINFORCED WITH DOUBLE LAYER OF NEOPRENE FOAM. VIBRATION REDUCTION.

FORESTRY )

+

BREATHABLE WATER-REPELLENT LEATHER. PROTECTIVE POLYCARBONATE SHELL ON LEFT HAND. LEATHER REINFORCEMENT ON THE BACK.

BREATHABLE WATER-REPELLENT LEATHER. GOOD RESISTANCE TO PERFORATION. SPLIT LEATHER PALM REINFORCEMENT.

Exists only on left hand. Chain speed 20 m/s

BUCHERON3122 classe 1Use: Handling with use of chain tools. Forestry wood-cutting.

FORESTIERIND2122Use: Handling of vibrating materials, pruning, scrub clearing.

COSTAUD4134Use: Heavy duty work in wet environment. Forestry, Roofing, Concrete. Material:

Material:

Material: Glove made of water-repellent split leather. Reinforced palm and leather wrist protection. Water-repellent full grain leather back. Excellent abrasion and perforation resistance. Snug-fit wrist. Available sizes: 7/8/9/10/11. Care:

Water-repellent, full grain leather. Right hand reinforced on the back with full grain water-repellent leather. Left hand gusset on back made of water-repellent full grain leather reinforced by a polycarbonate and foam shell. Snug-fit wrist. Available sizes: 8/9/10/11. Care:

Glove and wrist reinforcement of full grain water-repellent leather (thickness 1 mm). Palm and back reinforced with oil-repellent split grain oil-repellent leather. Foam-lined palm reinforcement (thickness 5 mm). Thumb seam reinforced with cord. Snug-fit wrist. Length 26 cm. Available sizes: 8/9/10/11. Care:

56

57

PROFESSIONS OPTICAL / CLEANING /WATCHMAKING / JEWELLERY )

PROFESSIONSPAINTWORK )

+

+QUALITY PROCESS. ANTI-STATIC, NON-LINTING FABRIC.

+

QUALITY PROCESS. ANTI-STATIC, NON-LINTING FABRIC. GOOD DEXTERITY. AMBIDEXTROUS.

NON-LINTING FABRIC GOOD DEXTERITY. LONG LASTING. SILICONE-FREE.

SPEEDNETUse: Optical, photography, glasswork. Bodywork, polishing. Household appliances. Cosmetics. Electronics.

35X30 SPEEDNETUse: Optical, photography, glasswork. Bodywork, polishing. Household appliances. Cosmetics. Electronics.

TN27NSUse: Precision mounting operations. Paint finishings. Material:

Material:

surface cleaned with SPEEDNET TM

Material: Glove of 100% polyamide 40 deniers. Glove finished with double hem non-linting fabric. Silicone-free seams. Length 26 cm. Available sizes: 6/7/8/9/10. Care:40

fingerprintGlove of locknit SPEEDNET with spandex. Length 27 cm. Available sizes: 6/7/8/9/10/11. Care:40

35x30 cm square of locknit SPEEDNET with spandex. Care:40

Available in length 22 cm. 58 59

PROFESSIONS / NACBITE PROTECTION )

PROFESSIONS

+

CRUSH PROTECTION )

+

SUPPLE. PROTECTION AGAINST BITES.

FINGERTIPS REINFORCED WITH METAL SHELL. ELASTIC WRISTBAND. SUPPLE.

ANIMALYS12323Use: Work with animals. Material:

CRUSH5424 4Use: Protection against crushing. Handling of gas tanks. Trapdoors. Power tools such as electric shears. Material:

Glove with wrapover on index. Water-repellent full grain leather (thickness 1 mm). Back, cuff, back reinforcement and thumb/index reinforcement of water-repellent full grain leather (thickness 1.5 mm). Glove and cuff 25 cm lined with para-aramid fleece lining. Length 58 cm with two cuff types: one of 25 cm with para-aramid fleece lining and the other of 15 cm unlined. Available in sizes: 9. Care:

Glove and wrist protection of natural full grain leather. Palm, finger, back, thumb/index, and ring finger protection made of heat-resistant split leather (thickness 1.4 mm). Fingers with aluminium shell at tips. Lined back reinforcement. Length 27 cm with 60 mm ecru ribbed edge. Available sizes: 7/8/9/10. Care:

60

61

PROFESSIONS

CUSTOM GLOVES )

PROFESSIONS

+

FIRE-FIGHTING )

+

FOR SPECIAL DEMANDS: SPECIALTY GLOVES, SPECIAL SIZES. GLOVES FOR DISABLED PERSONS.

GOOD DEXTERITY, COMFORTABLE.

SUR MESUREUse: ROSTAING is capable of rapidly developing custom gloves. Our flexibility and responsiveness work to protect peoples hands. We design and manufacture protective equipment in all types of shapes. Available sizes: all.

FIGHTER43243 4131XXUse: Fire extinction and road rescue. Search, rescue and extrication operations. Material:

Reinforced thumb/index, reinforced back and wrist protection of water-repellent and heat-resistant full grain leather (thickness 1 mm). Glove lined with para-aramid/cotton interlock. Insert between the lining and glove. Elastic wristband, snap hook for storage in pairs. Length 34 cm including 10 cm split leather cuff. Cuff with self-fastening strip. Available sizes: 7/8/9/10/11. Care:40

62

63

PROFESSIONS

FOOD INDUSTRY )

PROFESSIONS

+

LANDSCAPING )

+

+HEAVY DUTY. EXCELLENT GRIP. BREATHABLE BACK.

OPTIMAL MECHANICAL STRENGTH. SUPPLE, COMFORTABLE. GOOD DEXTERITY.

HEAVY DUTY. WATERPROOF.

TDMFOOD5454XMaterial:

ISO 13997 - TDM

Resistance to slicing LEVEL 5/5

LAD1303131Use: Handling in very wet conditions. Immersion. Construction. Recycling.

ROSIER.V / BRICK4242Use: Roofing. Handling of barbed wire. Trash collection. Handling of construction materials. Landscaping.

Use: Food preparation. Meat and fish cutting.

ARMORFRAMEKnitted glove made with high-tenacity Dyneema/Stainless Steel composite fibres. Length 28 cm. Available sizes: 6/7/8/9/10/11. Care:40

Material:

Material:

ARMORFRAME

Cotton with thick latex coating, cuff for forearm protection. Length 30 cm. Available sizes: 7/8/9/10. Care:

Latex-coated cotton. Very resistant to thorns. Ribbed cotton edge. Length 25 cm. Available sizes: 6/7/8/9/10. Care:

64

65

HANDLINGROSTAINGs expertise and know-how are demonstrated in the choice of raw materials and mastery of the manufacturing process.

PRECISION HANDLING

+

+ABRASION RESISTANT. OPTIMAL DEXTERITY. BREATHABLE BACK.

FULLY COATED. RESISTANT, SUPPLE, COMFORTABLE. OPTIMAL DEXTERITY.

Polyurethane coatings offer flexibility and strength.

HANDLING

The manufacturing process for nitrile (NITRITECTM), used in our NBRGRIP glove, provides the best grip of any product on the market for use in oily or greasy conditions. Our tannery ensures consistent quality for part of our procurement. The water and oil-repellent treatment of our leather repels water for up to 100 minutes. All our leathers are washable and stay supple after washing.

ZNPUG25 / FLEXGREY4121Use: All types of handling work. Multipurpose.

ZNPUPG25 / FLEXAIRGREY4121Use: Precision mechanics and handling.

Our comfortable materials, combined with top technologies, give this range

Material:

Material:

the best value for money.Grey polyamide knitted glove, grey polyurethane coating on the entire hand. Available sizes: 7/8/9/10. Care: Polyamide knitted glove with grey polyurethane coating on the palm and fingertips. Length 25 cm. Available sizes: 6/7/8/9/10/11. Care:

Available with breathable back, white polyamide. Ref: 66

ZNPU25 / FLEX

67

HANDLING

WET HANDLING

HANDLING

+

+TOP QUALITY LEATHER, WASHABLE, BREATHABLE. COMFORTABLE, SUPPLE. EXCELLENT ABRASION RESISTANCE.

OILY HANDLING

+

+FULLY COATED. OPTIMAL DEXTERITY. VERY GOOD ABRASION RESISTANCE. HANDLING OF OILY AND GREASY PARTS.

TOP QUALITY LEATHER, WASHABLE, BREATHABLE. COMFORTABLE, SUPPLE. EXCELLENT ABRASION RESISTANCE.

EXCEPTIONAL GRIP FOR HANDLING GREASY AND OILY PARTS. OPTIMAL DEXTERITY. VERY GOOD ABRASION RESISTANCE.

EPS7BPA3122Use: Handling in wet conditions. Assembly, rail, naval, aeronautics. Outdoor work, landscaping, road work. All types of construction work. Cabling. Material:

EPS25A3122Use: Handling in wet conditions. Assembly, rail, naval, aeronautics. Outdoor work, landscaping, road work. All types of construction work. Cabling. Material:

NBRGRIP4131Use: Automotive: assembly. Construction: abrasive finishings for plaster work, masonry, tiling, stone cutting. Assembly: handling in greasy and oily conditions. Material:

FLEXGNIT2122Use: Automotive: assembly. Construction: abrasive finishings for plaster work, masonry, tiling, stone cutting. Assembly: handling in greasy and oily conditions. Material:

Glove and wrist reinforcement of full grain goatskin (thickness 1 mm). Length 25 cm including 60 mm ribbed edge. Available sizes: 6/7/8/9/10/11. Care:

Glove and wrist reinforcement of full grain goatskin (thickness 1 mm). Elastic back. Length 25 cm. Available sizes: 6/7/8/9/10/11. Care:

Polyamide knitted glove coated with NITRITECTM on the palm and fingertips. Length 25 cm. Available sizes: 7/8/9/10. Care:40

Polyamide knitted glove coated with NITRITECTM on the palm and back. Length 25 cm. Available sizes: 7/8/9/10. Care:40

Available in full grain leather. Ref: 68

EPS7BP

Available in full grain bovine leather. Ref: HPS25

69

HANDLING

OILY HANDLING

+

+EXCELLENT ABRASION RESISTANCE. COMFORTABLE, GOOD DEXTERITY. WRIST PROTECTION. ELASTIC WRISTBAND.

EXCELLENT ABRASION RESISTANCE. EXCELLENT TEAR RESISTANCE. COMFORTABLE, GOOD DEXTERITY. WRIST PROTECTION.

Safety, sized to fit youCheck your glove size Place your hand on the glove so that the dotted line is between your thumb and index finger. The number to the right of your hand corresponds to your size.

EPSCPS25/124133Use: Handling in wet conditions. Assembly, rail, naval, aeronautics. All types of construction work. Multipurpose handling. Material:

EPSCPS7BP/124133Use: Handling in wet conditions. Assembly, rail, naval, aeronautics. All types of construction work. Multipurpose handling. Material:

6

7

8 9 10 11

Glove, palm, thumb and palm reinforcement of water and oil-repellent split calfskin (thickness1 mm). Back of water-repellent bovine leather (thickness 1 mm). Elastic back. Available sizes: 6/7/8/9/10/11. Care:

Glove, palm, thumb and palm reinforcement of water and oil-repellent split calfskin (thickness1 mm). Back of water-repellent bovine leather (thickness 1 mm). 60 mm ecru ribbed edge. Available sizes: 6/7/8/9/10/11. Care:

70

71

For further information:

www.rostaing.com

17 avenue Charles de Gaulle 01800 Villieu - France www.rostaing.com

France: Phone: 04 74 46 07 16 Fax: 04 74 6134 43 [email protected]

International: Phone: 33 (0) 474 460 710 Fax: 33 (0) 474 613 443 [email protected]

Design: Albert, Albert & Associs / 04 72 36 95 86 / non contractual photos /DR Rostaing