INDUSTRIAL Assembly Guide For Internal Use: FI.WR.INS.095_WKIN00243_IndUnit_Assembly_Rev1.indd Sample arrangements cabinets sold seperately Tower Island
INDUSTRIALAssembly Guide
For Internal Use: FI.WR.INS.095_WKIN00243_IndUnit_Assembly_Rev1.indd
Sample arrangementscabinets sold seperately
Tower
Island
For Internal Use: FI.WR.INS.095_WKIN00243_IndUnit_Assembly_Rev1.inddPage 1
INDUSTRIALAssembly Guide
DOORSAFE
REQUIRED TOOLS
INSTALLATION SHOULD BE PERFORMED BY A
COMPETENT PERSON ONLY. THIS PRODUCT COULD
BE DANGEROUS IF INCORRECTLY INSTALLED.
PRIOR TO INSTALLATION, FIXTURES INCLUDING DOORS, DRAWERS, LOOSE
SHELVES & LEGS SHOULD BE REMOVED TO ENSURE A SAFE INSTALLATION.
WREN RECOMMENDS USING DOORSAFE FOR TEMPORARY STORAGE.
Page 2
INDUSTRIALTOWER
Assembly Guide
Configuration may vary in accordance to specific customer kitchen plancabinets Included seperately
End Components Extension Components
Legs Legs
35mm Bolt & Washer
16mm Bolt & Washer
(K)30mmScrew
(L)16mm Screw
Detail A Detail BA B
End Frame Shelving (330, 570)
600
Extension Frame Shelving (330, 570)
600
Wall Securing Bracket
For Internal Use: FI.WR.INS.095_WKIN00243_IndUnit_Assembly_Rev1.indd
For Internal Use: FI.WR.INS.095_WKIN00243_IndUnit_Assembly_Rev1.inddPage 3
INDUSTRIALTOWER
Assembly Guide
For Internal Use: FI.WR.INS.095_WKIN00243_IndUnit_Assembly_Rev1.indd
Step 1.Using 4 x 35mm Bolt & Washer attach End Frame Shelf as shown,to secure to End or Internal Legs, where applicable. Adjust leg height per frame by twisting to suit.
For Shelf Positions see Specific Customer Kitchen Plan.
Step 2.Repeat shelf assembly as appropriate to customer, to form End/Extension Tower Frame, as shown.
Step 3.Attach assembled Tower Frames where appropriate to customer as shown.
End/Extension Shelf
End/Extension Shelf
End/Internal Leg
End/Internal Leg
Tower Frame Assembly
End/
Inte
rnal
Leg
s
Samplearrangements
Extension Frame Shelf
EndFrame Shelf
End/Internal Leg
End/Internal LegEnd
/Ext
ensi
on F
ram
e Sh
elf
BTM
End/Internal Leg
TOP
End/Internal Frame Shelf Bolt Location
Btm of End/Internal Leg
For Internal Use: FI.WR.INS.095_WKIN00243_IndUnit_Assembly_Rev1.indd Page 4
INDUSTRIAL TOWER
Assembly Guide
Step 6.Using 2 x 16mm Screws (L) per connecting plate, screw up through fixing plate into the base panel of each unit as shown.
Step 5. Where applicable, position door and drawer cabinets in accordance to customer specific frontal thickness. Ensure correct positioning of cabinets.
Step 4. Securing Metal Frame to WallTo secure tower frames, use the provided brackets to secure to wall. Secure bracket to top frame shelf at both sides using 16mm Bolt & Washer. Then screw through into wall as shown. Screws for fixing to walls are not provided as these vary depending on your wall material and construction. Ensure appropriate fixings for wall constructions are used.
Cabinet Installation
Front
Tower Assembly
Connecting Plate
LL
View from underside of unit
See Customer Specific Order for requirements.
Top Shelf
Top Shelf
To Wall
Decor
End
Decor
EndDecor Panel
Step 7. Decor PanelsMeasure and cut appropriately to ensure full cover of bare carcase. If necessary, scribe decor end panel to end of unit.
KStep 8. Decor Panel InstallationEnsure cabinets are located accordingly. Clamp décor end panels adjacent to the unit inside of the frame and screw through the unit into the décor panel using 30mm screws (K). Screw at the top and bottom of unit away from fixings such as drawers and hinges. For upper décor panels screw through the top of the unit at the Front/Back. Place cover caps on the heads of screws to conceal.
Step 9. Glass Shelf InstallationFor glass shelf installation only, install 1x rubber stopper provided with glass shelf on each connecting plate as shown. Position glass shelf with care.
RubberStopper
Please ensure steps are followed for a safe installation.
OR
Cabinet
Cabinet
Frtl
THK
Flush
Front
Front
For Internal Use: FI.WR.INS.095_WKIN00243_IndUnit_Assembly_Rev1.indd For Internal Use: FI.WR.INS.095_WKIN00243_IndUnit_Assembly_Rev1.inddPage 5
INDUSTRIALISLAND
Assembly Guide
35mm Bolt & Washer
16mm Bolt & Washer
End Components:
Internal Components:
Internal Frame Shelving
End Frame Shelving
(1215)600-1000
(1215)300-1000
(975)600-1000
(975)300-1000
(645)600-1000
(645)300-1000
Legs
Legs
Configuration may vary in accordance to specific customer kitchen plancabinets sold seperately
Unit Spacers
Detail A
Detail B
B
A
For Internal Use: FI.WR.INS.095_WKIN00243_IndUnit_Assembly_Rev1.indd Page 6
INDUSTRIALISLAND
Assembly GuideStep 1.Using 4 x 35mm Bolt & Washer attach End Frame Shelf as shown, to secure to End or Internal Legs, where applicable. Adjust leg height per frame by twisting to suit.
For Shelf Positions see Specific Customer Kitchen Plan.
Step 2.Using 4 x 35mm Bolt & Washer secure Internal Frame Shelf to Internal Legs where applicable as shown.
Btm of End/Internal Leg
End
Leg
End Frame
For shelf positions see specific customer kitchen plan
End Frame Shelf
Internal Frame Shelf
End Frame Shelf
End
Leg
Inte
rnal
Leg
End
Leg
End Shelf
End Shelf
Island Frame Assembly
End Frame Shelf Bolt Location
End
Leg
End Frame Shelf
End
Leg
Inte
rnal
Leg
Inte
rnal
Leg
For Internal Use: FI.WR.INS.095_WKIN00243_IndUnit_Assembly_Rev1.inddFor Internal Use: FI.WR.INS.095_WKIN00243_IndUnit_Assembly_Rev1.inddPage 7
INDUSTRIALISLAND
Assembly Guide
Step 7. Glass Shelf InstallationFor glass shelf installation only, install 1x rubber stopper provided with glass shelf, on each connecting plate as shown. Position glass shelf with care.
Step 3. Worktop InstallationTo secure worktop, screw up through connecting plates into your worktop to secure it in place. Screws for attaching to worktop are not provided as these vary depending on materials, thickness and construction. Ensure appropriate fixings for worktop construction are used. Please refer to the specialist worktop supplier if these are required for solid surface worktops.
Island Assembly
Step 6.
Ensure cabinets are located accordingly. Screw through unit into Spacer/Decor End Panel using 30mm screws (K) provided. Screw as shown at top and bottom of unit, away from fittings. Place a cover cap on head of screw to conceal.
K
Decor End
Length to su
it
Spacer
Spacer
Measure and cut appropriately to ensure full cover of bare carcase. Where applicable, scribe Decor End panel to the end of unit. Clamp Decor End panel adjacent to the unit within the frame.
OR
RubberStopper
See customer specific order for requirements.
Front
Step 4. Cabinet InstallationWhere applicable, position door and drawer cabinets in accordance to customer specific frontal thickness. Measure and cut provided spacer panel appropriately.Position flush against internal units at both sides, as shown. Ensure correct positioning of cabinets.
Cabinet
Cabinet
Frtl
THK
Flush
Front
Front
Please ensure steps are followed for a safe installation.
Step 5. Decor Panel Installation
Cabinet Securing using Spacer/Decor Panel