INDUSTRIAL VALVES 2018 Low Torque Design Design BS EN 1984 Face to face BS EN 558-1 S26 Flanges BS EN 1092 Testing BS EN 12266 A Rating BS EN 12516 Marking EN 19 CE - PED Certificates
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
(1) On request: faced with Stellite - Monel - Hastelloy - other materials (4) On request: GGG50 - Nitronic 60(2) On request: faced with Stellite - Monel - Hastelloy - other materials (5) On request: PTFE - other materials(3) On request: 17 Cr - Monel - Hastelloy - other materials (6) On request: PTFE - other materials( ) Gear operator recommended from DN 500.*
All data, subject to technical changes, are only for information and not for official use.
Europe Technology Manufacturer
PART NAME
1. Body
2.Seat Surface
3.Wedge Seat Surface
4.Stem
5.Gasket
6.Hexagon Nut
7.Bolts
8.Bonnet
9.Packing
10.Gland
11.Stem Nut
12.Bearing
13.Handwheel
MATERIAL
1.0619
Overlay X20Cr13 (1)
X20Cr13 (2)
X20Cr13 (3)
SS304+Graphite (6)
ASTM A194 2H
ASTM A193 B7
1.0619
Graphite (5)
1.0619
Cu-Alloy (4)
Alloy Steel
C.S
1.4308
1.4308(1)
1.4308(2)
1.4301(3)
SS304+Graphite (6)
ASTM A194 8
ASTM A193 B8
1.4308
Graphite (5)
1.4308
Cu-Alloy
Alloy Steel
C.S
1.4408
1.4408(1)
1.4408(2)
1.4401(3)
SS316+Graphite (6)
ASTM A194 8
ASTM A193 B8
1.4408
Graphite (5)
1.4308
Cu-Alloy
Alloy Steel
C.S
DIN PN40 - PN63 F7DIN GATE VALVES
All dimensions in mm (except where differently indicated) All data, subject to technical changes, are only for information and not for official use.