Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice. . Industrial PLC System IPLOG EN 60870-5-104 IEC 61131-3 www.metel.eu 1/17 www.iplog.eu Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice. . DI AI RE AO DO DI AI RE AO DO v IPLOGs are Linux based PLCs with support for writing user scripts v COM-IO modules support Modbus, M-BUS, RS485, RS232, 1-Wire and other standards v IO modules support a wide variety of analog I/O, digital I/O and relays outputs v IEC 61131-3 IDE and graphical SIMULand GUI for industrial and security applications v High security is assured by SSH, openVPN, SNMPv3, 802.1X and other tools used by IT experts v Highly durable hardware with integrated overvoltage protections v Operating temperatures from °C to +70°C INDUSTRIAL AUTOMATION MIOS-2 or MODBUS IO modules and sensors allow for the monitoring and controlling of environment variables according to specified requirements. A wide range of inputs / outputs are available directly in IPLOGs. RS232 Typical Applications of the IPLOG System versatility APP PLUGINS Custom-made plugins integrate with 3rd party security & automation systems. SMART METERING IPLOGs can remotely collect values of power, water and gas meters. PROCESS VISUALIZATION IPLOGs can be easily integrated in 3rd party systems via SNMP and EN 60870-5-104 protocols. OFF THE GRID SYSTEMS IPLOGs are designed to be efficient and are optimized for off-the-grid security or automation systems powered from renewable energy systems. GSM CONNECTIVITY Measured values and alarms are available online and they can be also sent via e-mail or SMS messages. IP WATCHDOG Integrated IP Watchdogs monitor the availability of IP devices. In the event of a problem an automatic restart SNMP, e-mail or SMS message will be triggered. PLC with 2 port switch PLC with GSM Port IO module COM GSM LAN DI AI RE AO DO IP CCTV SYSTEMS IPLOGs are able to control IP cameras via ONVIF protocol and process images.
17
Embed
Industrial PLC System IPLOG - METELIndustrial PLC System IPLOG EN 60870-5-104 IEC 61131-3 4/17 e--e.. PARAMETER USB-A USB-B Standard USB 2.0 USB 2.0 IPLOG Mode USB host USB device
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Pre
-pro
du
ctio
n d
ata
shee
t -
Th
e p
rod
uce
r re
tain
s th
e r
igh
t to
ch
an
ge
an
y te
chn
ica
l pa
ram
ete
rs w
ith
ou
t p
revi
ou
s w
ritt
en
no
tice
..
Industrial PLC SystemIPLOG
EN 60870-5-104 IEC 61131-3
www.metel.eu 1/17 www.iplog.eu
Pre
-pro
du
ction
da
tashee
t - Th
e pro
du
cer reta
ins th
e righ
t to ch
an
ge a
ny te
chn
ical p
aram
eters w
itho
ut p
revio
us w
ritten
no
tice.. DI AI RE AO DODI AI RE AO DO
v IPLOGs are Linux based PLCs with support for writing user scripts
v COM-IO modules support Modbus, M-BUS, RS485, RS232, 1-Wire and other standards
v IO modules support a wide variety of analog I/O, digital I/O and relays outputs
v IEC 61131-3 IDE and graphical SIMULand GUI for industrial and security applications
v High security is assured by SSH, openVPN, SNMPv3, 802.1X and other tools used by IT experts
v Highly durable hardware with integrated overvoltage protections
v Operating temperatures from °C to +70°C
INDUSTRIAL AUTOMATIONMIOS-2 or MODBUS IO modules and sensors allow for the monitoring and controlling of environment variables according to specified requirements.
A wide range of inputs / outputs are available directly in IPLOGs.
RS232
Typical Applications of the IPLOG System versatility
APP PLUGINSCustom-made plugins integrate with 3rd party security & automation systems.
SMART METERINGIPLOGs can remotely collect values of power, water and gas meters.
PROCESS VISUALIZATIONIPLOGs can be easily integrated in 3rd party systems via SNMP and EN 60870-5-104 protocols.
OFF THE GRID SYSTEMSIPLOGs are designed to be efficient and are optimized for off-the-grid security or automation systems powered from renewable energy systems.
GSM CONNECTIVITYMeasured values and alarms are available online and they can be also sent via e-mail or SMS messages. IP WATCHDOG
Integrated IP Watchdogs monitor the availability of IP devices. In the event of a problem an automatic restart SNMP, e-mail or SMS message will be triggered.
PLC with 2 port switch PLC with GSM Port IO module
COM
GSM
LAN
DI
AI
RE
AO
DO
IP CCTV SYSTEMSIPLOGs are able to control IP cameras via ONVIF protocol and process images.
Pre
-pro
du
ctio
n d
ata
shee
t -
Th
e p
rod
uce
r re
tain
s th
e r
igh
t to
ch
an
ge
an
y te
chn
ica
l pa
ram
ete
rs w
ith
ou
t p
revi
ou
s w
ritt
en
no
tice
..
Industrial PLC SystemIPLOG
EN 60870-5-104 IEC 61131-3
www.metel.eu 2/17 www.iplog.eu
Pre
-pro
du
ction
da
tashee
t - Th
e pro
du
cer reta
ins th
e righ
t to ch
an
ge a
ny te
chn
ical p
aram
eters w
itho
ut p
revio
us w
ritten
no
tice..
HardwareProgrammable logic controllers IPLOG have an outstanding modular design.
SoftwareIPLOGs and their IO modules are suitable for a wide variety of applications from industrial automation to
building automation and applications in security systems. IPLOGs can be configured in three different
ways.GUI SIMULand.v4 for Easy Setup
SIMULand.v4 software is a very useful tool especially in
situations where you need to quickly configure a
simple system without knowledge of IEC or script
programming. Its main advantages are:
v Graphical user interface
v CHAT client with technical support
v VPN client for remote help
SSH Console for IT Experts
IPLOGs are Linux based PLCs. Their large memory is
available for user applications. PLCs are delivered with
a standard set of tools. The user can download
additional packages from repositories. IPLOGs can be
programmed via scripts: Bash, PHP, Python
IEC 61131-3 IDE for Automation Professionals
IDE allows you to write code in any of the supported
IPLOG-G1 with CPU module IPLOG-G2 with CPU module IPLOG-G3
Motherboards provide PLC connectivity via LAN and GSM / GPRS interfaces. In addition, the
Motherboards are equipped with other important interfaces for interconnection with COMmunication
and IO modules. The full list of the available interfaces are listed in the table below:
Power Supply InputThe modern design of the switching supplies allows
the powering of IPLOG units in a wide range of
input voltages. IPLOGs can be powered directly
from batteries because power supplies are
automatically disabled when the input voltage is
below 10V.
CPU Module Interface CPU module interface is compatible with G and newer models of CPU modules. Modules are based on a CORTEX A5 ARM microprocessor running on a Linux embeded OS. The module has an operating temperature range from to + 70°C and contains storage space of 128MB FLASH and 256MB RAM for customer applications.
*The reported values are an average among all bands.
Pre
-pro
du
ctio
n d
ata
shee
t -
Th
e p
rod
uce
r re
tain
s th
e r
igh
t to
ch
an
ge
an
y te
chn
ica
l pa
ram
ete
rs w
ith
ou
t p
revi
ou
s w
ritt
en
no
tice
..
Industrial PLC SystemIPLOG
EN 60870-5-104 IEC 61131-3
www.metel.eu 4/17 www.iplog.eu
Pre
-pro
du
ction
da
tashee
t - Th
e pro
du
cer reta
ins th
e righ
t to ch
an
ge a
ny te
chn
ical p
aram
eters w
itho
ut p
revio
us w
ritten
no
tice..
PARAMETER USB-A USB-B
Standard USB 2.0 USB 2.0
IPLOG Mode USB host USB device
Function External storage Local management
Ethernet portsIPLOG-G1 series include 2 port ethernet managed switches with support for: RSTP - redundant LAN connectionQoS - packets can be processed in accordance with the assigned prioritiesVLAN - splitting of data into virtual networksIPLOG-G2 and IPLOG-G3 series include 1 ethernet suitable for communication with locally connected peripheries.
GSM/GPRS portIPLOG-G2 and IPLOG-G3 series are equipped with a wireless GSM/ GPRS module. It can be used for:
v Data collection from distant objects
v Sending and receiving SMS
v Firmware upgrade The wireless module can be shut down, if required
as a maximum energy-saving option.
USB portsIPLOGs PLCs are equipped with USB-A and USB-B connectors which are in accordance with the USB 2.0 standard. The basic ways of using the USB ports are the following:Connection of remote mass storage – IPLOG can in the USB host mode use external USB mass storage as additional memory for storing or reading data.Local secured management – for security purposes
remote management can be prohibited. In such situations the local USB console can be used.
COM IO Module InterfaceWithin this interface is the possibility to assemble any type of COM IO modules listed on the following pages. Modules can be assembled / dissasembled only when the motherboard is disconnected from the power supply. After connection to the input
power, a new COM lO module is automatically
detected and available. COM channels and inputs/outputs are accessed in the configuration software.
IO Module InterfaceWithin this interface is the possibility to assemble
any type of lO modules together with any other
COM-IO modules listed on the following pages. Modules can be assembled / dissasmbled only when the motherboard is disconnected from the power supply. After connection the input power a new IO module is automatically detected and available inputs/outputs are accessed in the configuration software.
PARAMETER VALUE NOTE
Quantity 0 / 1 G1 / G2, G3
Connectors SMA
Freq. Bands 2G 900 / 1800 MHz
Freq. Bands 3G 900 / 2100 MHz
Freq. Bands 4G 800 / 1800 / 2600 MHz
Data Connectivity GPRS, EDGE, UMTS, HSDPA
SIM Slot microSIM
Protection Transil Transil
Output Current Max. 500 mA -
PARAMETER VALUE NOTE
Quantity 2 / 1 G1 / G2, G3
Connectors Shielded RJ45
Data Speed 10/100BaseT
AutoMDI-MDIX Yes
Auto-Negotiation Yes
Protocols VLAN, QoS, RSTP, IGMP
PARAMETER VALUE NOTE
Quantity 2 / 1 G1 / G2, G3
Connectors Shielded RJ45
Data Speed 10/100BaseT
AutoMDI-MDIX Yes
Auto-Negotiation Yes
Protocols VLAN, QoS, RSTP, IGMP
Available Motherboards
Pre
-pro
du
ctio
n d
ata
shee
t -
Th
e p
rod
uce
r re
tain
s th
e r
igh
t to
ch
an
ge
an
y te
chn
ica
l pa
ram
ete
rs w
ith
ou
t p
revi
ou
s w
ritt
en
no
tice
..
Industrial PLC SystemIPLOG
EN 60870-5-104 IEC 61131-3
www.metel.eu 5/17 www.iplog.eu
Pre
-pro
du
ction
da
tashee
t - Th
e pro
du
cer reta
ins th
e righ
t to ch
an
ge a
ny te
chn
ical p
aram
eters w
itho
ut p
revio
us w
ritten
no
tice..
Available Modifications
IPLOG-G1
When ordering it is necessary to indicate the correct name of the device which is governed by the
following rules:
v IPLOG s marking depends on the motherboard, IO module, COM-IO modules and CPU modules used.
The control units are designed in such a way that the modules can be changed at any time. Any new
module is then automatically detected and available for use.
v All IO modules can be used as IPLOGs subboards or as standalone modules connected via the RS485.
v The control units are designed in such a way that the COM or COM-IO modules can be changed at any
time. A new module is then automatically detected and available for use.
The 2nd option in ordering is to indicate the order code of the device.
Application Example: IPLOG as control unit integrating security systems and visualization
IPLOG-G1-01-BO8.1 - forwards alarms from perimeter system Peridect+ To 3rd party alarm panels (relay or resistive outputs) or to visualization softwares with SNMPv3 support.
The symbols used xx and yy replace the assembled version of the COM IO modules.
CUP+
SNMPv3
TCP
Visualization
RS485
Alarm panel
Alarm loops
Pre
-pro
du
ctio
n d
ata
shee
t -
Th
e p
rod
uce
r re
tain
s th
e r
igh
t to
ch
an
ge
an
y te
chn
ica
l pa
ram
ete
rs w
ith
ou
t p
revi
ou
s w
ritt
en
no
tice
..
Industrial PLC SystemIPLOG
EN 60870-5-104 IEC 61131-3
www.metel.eu 6/17 www.iplog.eu
Pre
-pro
du
ction
da
tashee
t - Th
e pro
du
cer reta
ins th
e righ
t to ch
an
ge a
ny te
chn
ical p
aram
eters w
itho
ut p
revio
us w
ritten
no
tice..
When ordering it is necessary to indicate the correct name of the device which is governed by the
following rules:
v IPLOG s marking depends on the motherboard, IO module, COM-IO modules and CPU modules used.
The control units are designed in such a way that the modules can be changed at any time. Any new
module is then automatically detected and available for use.
v All IO modules can be used as IPLOGs subboards or as standalone modules connected via the RS485.
v The control units are designed in such a way that the COM or COM-IO modules can be changed at any
time. A new module is then automatically detected and available for use.
The 2nd option in ordering is to indicate the order code of the device.
Application Example: IPLOG-G2-07G-DI8.1 as a centralized distribution of beverages. v The IPLOGs with IO modules are installed in each warehouse with beverages tanksv Filling and pumping of beverages is centrally recordedv Suppliers and customers authenticate themselves using Ibutton readers
The symbols used xx and yy replace the assembled version of the COM IO modules.
Fl Fl Fl Fl
RS485
1-Wire
Pre
-pro
du
ctio
n d
ata
shee
t -
Th
e p
rod
uce
r re
tain
s th
e r
igh
t to
ch
an
ge
an
y te
chn
ica
l pa
ram
ete
rs w
ith
ou
t p
revi
ou
s w
ritt
en
no
tice
..
Industrial PLC SystemIPLOG
EN 60870-5-104 IEC 61131-3
www.metel.eu 7/17 www.iplog.eu
Pre
-pro
du
ction
da
tashee
t - Th
e pro
du
cer reta
ins th
e righ
t to ch
an
ge a
ny te
chn
ical p
aram
eters w
itho
ut p
revio
us w
ritten
no
tice..
When ordering it is necessary to indicate the correct name of the device which is governed by the
following rules:
v IPLOG s marking depends on the motherboard, IO module, COM-IO modules and CPU modules used.
The control units are designed in such a way that the modules can be changed at any time. Any new
module is then automatically detected and available for use.
v All IO modules can be used as IPLOGs subboards or as standalone modules connected via the RS485.
v The control units are designed in such a way that the COM or COM-IO modules can be changed at any
time. A new module is then automatically detected and available for use.
The 2nd option in ordering is to indicate the order code of the device.
Application Example: IPLOG in the OFF-THE-GRID security application
IPLOG-G3-01-BI8.1-06 - the diagram shows the protection of a vineyard in the DEMO system in Česká Skalice (Czech Republic). The main goal of the system is to secure and automate the area without any electricity. The main functions are:v In the situation when some PIR sensor detects movemnet, the camera is turned towards this sensor in
an alarm state and starts recordingv During the night the PLC automatically turns on the IR lights v Disturbs the birds eating grapes by randomly playing pre-recorded soundsv The perimeter system is guarded by a fence