This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
6
Lighting Havells Application Lamp Product No. Of Lamp Mounting Type Ballast Type Source Version Lamp Wattage ignitor Type Type
L H C C N 1 3 3 6 1 1 1
B = BallastC = CommercialD = DomesticE = EmergencyF = Flood LightG = Control Gear BoxI = IndustrialR = RoadwayS = SourcesV = Vapour ProofW = Well GlassY = Spare Parts
To Choose from Commercial range mirror optic AS series 36W with multiple variables.
B = Blended MVC = CFLF = Flourescent G = HPMVH = Tungsten Halogen L = GLSM = Metal HalideS = Sodium VapourT = T5 FTLW = Elliptical HID onlyY = Tubular HID onlyZ = Both E/T HID
A = MS white painted CAT III reflector (L1)B = Specular finish Al. CAT III reflector (L1)C = Specular finish Al. CAT II reflector (L2)N = Non Category LouvreP = Polycarbonate Louvre
Decorative ultra slim box fi xture with Industrial electronic ballast suitable for single 28W linear fl uorescent lamp for Industries/ indoor application only.
Specifi cation
HousingMade up of ultra slim CRCA sheet steel.
FinishEpoxy coated white after phosphochromate treatment.
End capsBlue colour clip-on end caps provided as standard.
Lamp HoldersPush fi t type white polycarbonate with phosphor bronze contacts.
Electric gearPre-wired with 240V rated high frequency HPF electronic ballast, less than 33% upto terminal block, packed in gift box.
MountingOn ceiling/ wall with screws or suspend by stainless steel suspension wire.
General purpose industrial compact batten suitable for 28W (T5 FTL) single and twin linear fl uorescent lamps.
Specifi cation
HousingHousing & cover made up of CRCA sheet steel.
FinishEpoxy powder coated white after phosphochromate treatment.
Lamp HoldersRotor type white polycarbonate/ ABS with electrical grade brass contacts.
Electric gearPre-wired with high performance electronic ballast (THD<33%) as a standard.Option of high frequency digital ballast (THD<10%) available on request.
MountingOn ceiling/ wall with screws or suspend by 2 nos. Ø19 mm conduit or chain.
Energy effi cient industrial compact batten suitable for 28W (T5 FTL) single and twin linear fl uorescent lamps.
Option to use 54W T5 HO fl uorescent lamp available on request.With HF digital ballast option, power factor > 0.98
Specifi cation
HousingHousing & cover made up of CRCA sheet steel.
FinishEpoxy powder coated white after phosphochromate treatment.
Lamp HoldersRotor type white polycarbonate/ ABS with electrical grade brass contacts.
Electric gearPre-wired with high performance electronic ballast (THD<33%) as a standard.Option of high frequency digital ballast (THD<10%) available on request.
MountingOn ceiling/ wall with screws or suspend by 2 nos. Ø19 mm conduit or chain.
with PC Refl ector LHIT11128032LHYT19228099LHIT11228033LHYT19228099with AL Refl ectorLHIT11128032LHYT20228099LHIT11228033LHYT20228099
1x28W T5 FTL
2x28W T5 FTL
1x28W T5 FTL
2x28W T5 FTL
240
240
240
240
0.140
0.280
0.140
0.280
G5
G5
G5
G5
>0.95
>0.95
>0.95
>0.95
Batten Popular T5 PCR/ALR
General purpose industrial compact batten suitable for 28W (T5 FTL) single and twin linear fl uorescent lamps with powder coated or aluminium refl ector.
Specifi cation
HousingHousing & cover made up of CRCA sheet steel.
FinishEpoxy powder coated white after phosphochromate treatment.
Refl ectorEither powder coated white (PCR) after phosphochromate treatment or high purity pre-anodised aluminium sheet (ALR).
Lamp HoldersRotor type white polycarbonate/ ABS with electrical grade brass contacts.
Electric gearPre-wired with high performance electronic ballast (THD<33%) as a standard.Option of high frequency digital ballast (THD<10%) available on request.Option to use 54W T5 fl uorescent lamp available on request.
MountingOn ceiling/ wall with screws or suspend by 2 nos. Ø19 mm conduit or chain.
Energy effi cient industrial batten with matt fi nish refl ector suitable for 28W/ 54W (T5 FTL) single or twin linear fl uorescent lamps.
Specifi cation
HousingChannel & refl ector made of extruded aluminium sections.
FinishAnodised matt fi nish refl ector after phosphochromate treatment.
Lamp HoldersRotor type white polycarbonate/ ABS with electrical grade brass contacts.
Electric gearPre-wired with high performance electronic ballast (THD<33%) as a standard.Option of high frequency digital ballast (THD<10%) for 28W only available on request.
MountingOn ceiling/ wall with screws or suspend by stainless steel suspension wires.
ApplicationsGaragesBattery roomsStorage areasIndustrial shedsAssembly benchesThermal power stations
1170±2
Side View
36±2
90±
2
80±2Front View
1170±2
Side View
115±2Front View
36±2
90±
2
Ext. T5 Batten 1x28W T5
Ext. T5 Batten 2x28W T5
OrderingCode
LampType
Nominal Voltage (V)
MainsCurrent (A)
Lamp Socket
Power Factor
LHIT04128032LHIT04228033LHIT04154071LHIT04254071
1x28W T5 FTL2x28W T5 FTL
1x54W T5 FTL HO2x54W T5 FTL HO
240240240240
0.1400.2800.2300.460
G5G5G5G5
>0.95>0.95>0.95>0.95
All dimensions are in mm
14
Industrial
Lighting
General purpose domestic batten suitable for 36W FTL (T8) or 40W FTL (T12) single and twin linear fl uorescent lamps.
Batten Gold (LPF/HF)
With HF digital ballast option power factor > 0.98
Specifi cation
HousingHousing & cover made up of CRCA sheet steel.
FinishEpoxy powder coated white after phosphochromate treatment.
Lamp HoldersPush fi t type white polycarbonate/ ABS with electrical grade brass contacts.
Electric gearPre-wired with open construction copper wound ferromagnetic ballast 230V, •50Hz (domestic), universal starter (FSU) upto terminal block.Pre-wired with high frequency electronic ballast (THD<33%) upto terminal •block.
Option with high frequency digital ballast (THD<10%) available on request.
MountingOn ceiling/ wall with screws or suspend by 2 nos. Ø19 mm conduit or chain.
ApplicationsLobbiesSchoolsOffi cesConference room
1238±2
Side View
48±2
77±
2
Front View
56±2
1238±2
Side View
48±2
77±
2
Front View
103±2
Batten Gold 1x36/40W
Batten Gold 2x36/40W
OrderingCode
LampType
Nominal Voltage (V)
MainsCurrent (A)
Lamp Socket
PowerFactor
LHIF11104009LHIF11104025LHIF11204009LHIF71204025
1x36/40W FTL LPF1x36/40W FTL HF Electra
2x36/40W FTL LPF2x36/40W FTL HF Electra
230230230230
0.3600.1600.7200.320
G13G13G13G13
>0.50>0.90>0.50>0.90
All dimensions are in mm
15
Industrial
Lighting
OrderingCode
LampType
NominalVoltage
(V)
MainsCurrent
(A)
Lamp Socket
PowerFactor
CapacitorValue
LHIF71104011LHIF71104026LHIF71204011LHIF71204026
1x36/40W FTL HPF1x36/40W FTL HF
2x36/40W FTL HPF2x36/40W FTL HF
240240240240
0.2300.1600.4600.320
G13G13G13G13
>0.85>0.95>0.85>0.95
4 mfd -
8 mfd-
General purpose industrial batten suitable for 36W FTL (T8) or 40W FTL (T12) single and twin linear fl uorescent lamps.
Batten Gold (HPF)
With HF digital ballast option power factor > 0.98
Specifi cation
HousingHousing & cover made up of CRCA sheet steel.
FinishEpoxy powder coated white after phosphochromate treatment.
Lamp HoldersPush fi t type white polycarbonate/ ABS with electrical grade brass contacts.
Electric gearPre-wired with open construction copper wound ferromagnetic ballast, •240V, 50Hz, universal starter (FSU) and power factor improvement capacitor upto terminal block.Pre-wired with high frequency electronic ballast (THD<33%) upto terminal •block.
Option with high frequency digital ballast (THD<10%) available on request.
MountingOn ceiling/ wall with screws or suspend by 2 nos. Ø19 mm conduit or chain.
with PC Refl ector LHIF33104011LHIF33104026LHYF19236099LHIF33204011LHIF33204027LHYF19236099with AL Refl ectorLHIF33104011LHIF33104026LHYF20236099LHIF33204011LHIF33204027LHYF20236099
1x36/40W FTL1x36/40W FTL HF
2x36/40W FTL2x36/40W FTL HF
1x36/40W FTL1x36/40W FTL HF
2x36/40W FTL2x36/40W FTL HF
240240
240240
240240
240240
0.2300.160
0.4600.320
0.2300.160
0.4600.320
G13G13
G13G13
G13G13
G13G13
>0.85>0.95
>0.85>0.95
>0.85>0.95
>0.85>0.95
4mfd-
8mfd-
4mfd-
8mfd-
General purpose industrial batten suitable for 36W FTL (T8) or 40W FTL (T12) single and twin linear fl uorescent lamps with powder coated or aluminium refl ector.
Batten Gold PCR/ALR
Specifi cation
HousingHousing made up of CRCA sheet steel.
FinishEpoxy powder coated white after phosphochromate treatment.
Refl ectorEither powder coated white (PCR) after phosphochromate treatment or high purity pre-anodised aluminium sheet (ALR).
Lamp HoldersPush fi t type white polycarbonate/ ABS with electrical grade brass contacts.
Electric gearPre-wired with open construction copper wound ferromagnetic ballast, universal starter (FSU) and power factor improvement capacitor upto terminal block.Option with high frequency electonic ballast (THD<33%) or digital ballast (THD<10%) available on request.
MountingOn ceiling/ wall with screws or suspend by 2 nos. Ø19 mm conduit or chain.
Batten Gold 2x36/40W PCR/ALRAll dimensions are in mm
17
Industrial
Lighting
Prodigy
Energy saving ready to use retrofi t T5 luminaire compatible with existing open FTL T12 fi xture by removing starter.
OrderingCode
LampType
NominalVoltage (V)
MainsCurrent (A)
Lamp Socket
PowerFactor
LHIT12114431LHIT12128432
1x14W T5 FTL1x28W T5 FTL
240240
0.0700.140
G5G5
>0.95>0.95
Specifi cation
Saves over 45% energy as compared to 40W FTL with electromagnetic •ballastPre-heat start electronic circuit enhances lamp life•Hum free & fl icker free operation from 125V to 285V•Reduces heat load on air conditioners•Built-in lamp ageing protection•Over voltage protection at 295V and above•Energy Effi ciency Index (EEI) : A2•Controlled harmonic distortion (THD<33%)•High power factor >0.95•
AdvantageActs as a retrofi t solution•Old industrial batten conversion easy•Ideal for converting T12/ T8/ fi ttings to T5•Suitable for any patti fi tting (remove starter)•
Ensure removal of starter from old T12/ T8 fi tting before fi xing “Prodigy“ in and switching on.
All dimensions are in mm
18
Industrial
Lighting
Magnum 1
Corrosion resistant, impact proof, surface mounting luminaire with polycarbonate housing with transparent & reeded polycarbonate cover suitable for wet location.
Specifi cation
HousingMade up of corrosion resistant unbreakable polycarbonate body.
CoverClear polycarbonate cover with better light dispersive internal reeds.
OpticsRefl ector made from powder coated white MS sheet.
Lamp holderPush fi t type white polycarbonate/ ABS with electrical grade brass contacts.
Electric gearFor 1x36W FP-L & 2x36W FP-L : Pre-wired with open construction copper •wound ferromagnetic ballast, universal starter (FSU) and power factor improvement capacitor upto terminal block.For 2x18/20W FTL : Pre-wired with single 36/40W open construction •copper wound ferromagnetic ballast, 110V starters (FS2) and power factor improvement capacitor upto terminal block.
Option with high frequency electonic ballast (THD<33%) or digital ballast (THD<10%) available on request.
MountingOn ceiling/ wall through 2 nos. slots using screws from the top of the luminaire.
ApplicationBattery roomsRailway stationsUnderground parkingsThermal power stations
Corrosion resistant, impact proof, surface mounting luminaire with polycarbonate housing with transparent & reeded polycarbonate cover suitable for wet location.
Specification
HousingMade up of corrosion resistant unbreakable polycarbonate body.
CoverClear polycarbonate cover with better light dispersive internal reeds.
OpticsReflector made from powder coated white MS sheet.
Lamp Holders Push fit type white polycarbonate/ ABS with electrical grade brass contacts.
Electric gearFor 1x36/40W FTL & 2x36/40W FTL : Pre-wired with open construction •copper wound ferromagnetic ballast, universal starter (FSU) and power factor improvement capacitor upto terminal block.
Option with high frequency electonic ballast (THD<33%) or digital ballast (THD<10%) available on request.
For T5 lamps : Pre-wired with high performance electronic ballast (THD<33%) •as a standard.
Option of high frequency digital ballast (THD<10%) available on request.
MountingOn ceiling/ wall through 2 nos. slots using screws from the top of the luminaire.
ApplicationBattery roomsChilling plantsChemical factoriesUnderground parkingsThermal power stations
*With HF digital ballast option power factor >0.98, THD <10%
Clean Room Bottom Opening
Clean room bottom opening luminaire suitable for twin linear fl uorescent lamps or twin/ three FPL lamps with M.S. powder coated frame & acrylic cover.
Specifi cation
HousingMade up of CRCA sheet steel.
FinishEpoxy powder coated white after phosphochromate treatment.
OpticsRefl ector made up of high purity pre-anodised aluminium sheet.
Frame & coverFrame made up of Mild Steel (MS) & cover made up of methacrylate.
Lamp HolderRotor type white polycarbonate/ ABS with electrical grade brass contacts.
Electric gearPre-wired with HF high performance electronic ballast (THD<33%) upto terminal block.Option of high frequency digital ballast (THD<10%) available on request.
MountingProvision for suspension through Ø19 mm conduit or on ceiling with 4nos. holes of Ø6 mm.
Integral well glass luminaire suitable for 70W High Pressure Sodium Vapour/ Metal Halide/ 125W Mercury Vapour/ 150W Sodium Vapour lamp for vapour ladden areas.
CoverHeat resistant glass bowl with zinc plated/galvanized MS wire guard.
FinishEpoxy powder coated grey after phosphochromate treatment.
OpticsWhite painted housing from inside acts as reflector.
Lamp HolderE 27/E 40 ceramic lamp holder with electrical grade copper contacts provided as standard.
Electric gearPre-wired with power factor improvement capacitor and impulse ignitor for reliable ignition upto terminal block, copper wound ferromagnetic ballast supplied separately be wired as per instruction.
MountingSuspend by means of 2 nos. “U” brackets.
ApplicationsSteel plantsIndustrial baysThermal plantsCement factoriesMedium industrial units
*Housing consists of lamp compartment & gear box, packed separately.
Vertical mounting integral well glass luminaire, suitable for 70W High Pressure Sodium Vapour/ Metal Halide or 125W Mercury Vapour lamp/ 18W/ 26W non-retro CFL.
*Housing consists of lamp compartment & gear box, packed separately.
CoverHeat resistant glass bowl with zinc plated/galvanized MS wire guard.
FinishEpoxy powder coated grey after phosphochromate treatment.
OpticsWhite painted circular disc acts as refl ector.
Lamp HolderE27 ceramic lamp holder with electrical grade copper contacts.
Electric gearUse appropriate CG box as per selected HID lamp source.
MountingSuspend by means of provided heavy duty suspension hook.
ApplicationsSteel plantsIndustrial baysThermal plantsCement factoriesMedium industrial units
All dimensions are in mm
24
Industrial
Lighting
Cutout size : 388 x 205Ordering
CodeLampType
Nominal Voltage
(V)
Mains Current
(A)
Lamp Socket
Power Factor
CapacitorValue
LHPY02170D99LHBW08170036LHPY02115D99LHBW08115036
1x70W MH DE
1x150W MH DE
240
240
0.400
0.820
Rx7s
Rx7s
>0.85
>0.85
10 mfd
20 mfd
93±
2
TopView
Front View258±2
417±
2
Canopy
Functional petrol pump/canopy light with & die-cast Al. body with toughened glass lens suitable for 70/150W High Pressure double ended Metal Halide lamp.
Specifi cation
HousingMade up of die-cast aluminium alloy LM6.
CoverTempered protective toughened front glass, 5mm thick, thermal shock & Impact resistant well shielded by cast aluminium frame.
FinishPowder coated grey after phosphochromate treatment.
OpticsRefl ector made up of high purity dimpled/ peened pre-anodised specular aluminium sheet.
Lamp HolderRx7s ceramic lamp holder with electrical grade copper contacts.
Electric gearPre-wired with power factor improvement capacitor and impulse ignitor for reliable ignition upto terminal block, copper wound ferromagnetic ballast supplied separately be wired as per instruction.
MountingSuspend by means of 2nos. “Z” brackets provided.
ApplicationsPetrol pumpToll plazaRailway platform
All dimensions are in mm
25
Industrial
Lighting
Cutout size : 445 x 248Ordering
CodeLampType
Nominal Voltage
(V)
Mains Current
(A)
Lamp Socket
Power Factor
CapacitorValue
LHPY03125D99LHBW19125036 1x250W MH SET 240 1.320 E40 >0.85 33 mfd
Canopy (Single Ended)
Functional petrol pump/canopy light with die-cast Al. body with toughened glass lens suitable for 250W High Pressure single ended tubular Metal Halide lamp.
Specifi cation
HousingMade up of die-cast aluminium alloy LM6.
CoverTempered protective toughened front glass, 5mm thick, thermal shock & Impact resistant well shielded by cast aluminium frame.
FinishPowder coated grey after phosphochromate treatment.
OpticsRefl ector made up of high purity dimpled/ peened pre-anodised specular aluminium sheet.
Lamp HolderRx7s ceramic lamp holder with electrical grade copper contacts.
Electric gearPre-wired with power factor improvement capacitor and impulse ignitor for reliable ignition upto terminal block, copper wound ferromagnetic ballast supplied separately be wired as per instruction.
MountingSuspend by means of 2nos. “Z” brackets provided.
Exceptionally blended functional top aluminium refl ector with translucent polycarbonate lower refractor for 250W/ 400W High Pressure elliptical coated Sodium Vapour/ Metal Halide lamp.
Specifi cation
HousingPressure die-cast aluminium housing with cooling serrations on side.
Lamp HolderCeramic lamp holder with electrical grade copper contacts, fi xed to adjustable lamp holder bracket.
Electric gearPre-wired with power factor improvement capacitor and SI ignitor for reliable ignition upto terminal block, copper wound ferromagnetic ballast supplied separately, to be wired as per instruction.
MountingMounting by means of hook provided on top of housing.
ApplicationsAtriumsArrival hallsShopping mallsAirport waiting loungesPublic circulating areas
ø364
ø470
490±3Front View
240±
2
Top View
615±
3
*Refractor housing and refractor with cover supplied in seperate bulk packing for transportation ease, for assembly refer to provided instruction sheet.
Vertical highbay/ mediumbay luminaires suitable for elliptical coated High Pressure Sodium Vapour lamp upto 400W.
Specifi cation
HousingPressure die-cast aluminium housing with cooling serrations on side.
FinishEpoxy powder coated grey color after phosphochromate treatment.
OpticsSpun aluminium refl ector electrochemically brightened, anodised outside and sand blasted from inside.
Lamp HolderCeramic lamp holder with electrical grade copper contacts fi xed to adjustable lamp holder bracket.
Electric gearPre-wired with power factor improvement capacitor and SI ignitor for reliable ignition upto terminal block, copper wound ferromagnetic ballast supplied separately, to be wired as per instruction.
MountingMounting by means of hook provided on top housing.
Vertical highbay/ mediumbay luminaire (with glass)suitable for elliptical coated High Pressure Sodium Vapour/ Metal Halide lamp upto 400W.
Specifi cation
HousingPressure die-cast aluminium housing with cooling serrations on side.
CoverThermal shock proof, impact resistant, tempered and toughened protective 5mm thick glass fi xed to the refl ector by 3 nos. toggles.
FinishEpoxy powder coated grey color after phosphochromate treatment.
OpticsSpun aluminium refl ector electrochemically brightened, anodised outside and sand blasted from inside.
Lamp HolderCeramic lamp holder with electrical grade copper contacts fi xed to adjustable lamp holder bracket.
Electric gearPre-wired with power factor improvement capacitor and SI ignitor for reliable ignition upto terminal block, copper wound ferromagnetic ballast supplied separately, to be wired as per instruction.
MountingMounting by means of hook provided on top housing.
Lamp HolderCeramic lamp holder with electrical grade copper contacts fi xed to adjustable lamp holder bracket.
Electric gearPre-wired with power factor improvement capacitor and impulse ignitor for reliable ignition upto terminal block, copper wound ferromagnetic ballast supplied separately be wired as per instruction.
MountingSuspend by means of 12mm diameter threaded G.I. pipe.
ApplicationsArrival hallsShopping mallsAirport waiting loungesPublic circulating areas
*Refractor and cover supplied in separate bulk packing for transportation purpose, for installation refer to provided instructions.
Lamp HolderCeramic lamp holder with electrical grade copper contacts fi xed to adjustable lamp holder bracket.
Electric gearPre-wired with power factor improvement capacitor and impulse ignitor for reliable ignition upto terminal block, copper wound ferromagnetic ballast supplied separately be wired as per instruction.
MountingSuspend by means of provided heavy duty suspension hook.
ApplicationsArrival hallsShopping mallsAirport waiting loungesPublic circulating areas
660±
3
Ø570Front View
Top View
204±
2
*Refractor and cover supplied in separate bulk packing for transportation purpose, for installation refer to provided instructions.
Vertical highbay/ mediumbay luminaire suitable for High Pressure elliptical coated Sodium Vapour lamp upto 400W.
Specification
HousingPressure die-cast aluminium alloy LM6.
FinishEpoxy powder coated grey color after phosphochromate treatment.
OpticsSpun aluminium reflector electrochemically brightened, anodised outside and sand blasted from inside.
Lamp HolderCeramic lamp holder with electrical grade copper contacts fixed to adjustable lamp holder bracket.
Electric gearPre-wired with power factor improvement capacitor and SI ignitor for reliable ignition upto terminal block, copper wound ferromagnetic ballast supplied separately, to be wired as per instruction.
MountingMounting by means of hook provided on top housing.
Vertical highbay/ mediumbay luminaire (with glass) suitable for High Pressure elliptical coated Sodium Vapour/ Metal Halide lamp upto 400W.
Specification
HousingPressure die-cast aluminium housing with cooling serrations on side.
FinishEpoxy powder coated grey color after phosphochromate treatment.
OpticsSpun aluminium reflector electrochemically brightened, anodised outside and sand blasted from inside.
Lamp HolderCeramic lamp holder with electrical grade copper contacts fixed to adjustable lamp holder bracket.
Electric gearPre-wired with power factor improvement capacitor and SI ignitor for reliable ignition upto terminal block, copper wound ferromagnetic ballast supplied separately, to be wired as per instruction.
MountingMounting by means of hook provided on top housing.
Open type vertical highbay/ mediumbay lumianire suitable for elliptical coated High Pressure Sodium Vapour/ Mercury Vapour lamp upto 400W.
Specifi cation
HousingHousing & cover deep drawn from EDD grade steel sheet.
FinishEpoxy powder coated grey after phosphochromate treatment.
OpticsSpun aluminium refl ector electrochemically brightened, anodised outside and sand blasted from inside.
Lamp HolderCeramic lamp holder with electrical grade copper contacts fi xed to adjustable lamp holder bracket.
Electric gearPre-wired with power factor improvement capacitor and impulse ignitor for reliable ignition upto terminal block, copper wound ferromagnetic ballast supplied separately be wired as per instruction.
MountingSuspend by means of provided heavy duty suspension hook.
Vertical enclosed type highbay/ mediumbay lumianire suitable for elliptical coated High Pressure Sodium Vapour/ Metal Halide/ Mercury Vapour lamp upto 400W.
Specifi cation
HousingHousing & cover deep drawn from EDD grade steel sheet.
CoverThrermal shock proof, impact resistant, tempered and toughened protective 5mm thick glass fi xed to the refl ector by 3 nos toggles.
FinishEpoxy powder coated grey after phosphochromate treatment.
OpticsSpun aluminium refl ector electrochemically brightened, anodised outside and sand blasted from inside.
Lamp HolderCeramic lamp holder with electrical grade copper contacts fi xed to adjustable lamp holder bracket.
Electric gearPre-wired with power factor improvement capacitor and impulse ignitor for reliable ignition upto terminal block, copper wound ferromagnetic ballast supplied separately be wired as per instruction.
MountingSuspend by means of provided heavy duty suspension hook.
Vertical highbay/ mediumbay luminaire suitable for High Pressure elliptical coated Sodium Vapour lamp upto 250W.
Specifi cation
HousingElegantly designed deep drawn sleek front opening housing.
FinishEpoxy powder coated grey color after phosphochromate treatment.
OpticsSpun aluminium refl ector electrochemically brightened, anodised outside and sand blasted from inside.
Lamp HolderCeramic lamp holder with electrical grade copper contacts fi xed to adjustable lamp holder bracket.
Electric gearPre-wired with power factor improvement capacitor and SI ignitor for reliable ignition upto terminal block, copper wound ferromagnetic ballast supplied separately, to be wired as per instruction.
MountingMounting by means of hook provided on top housing.
Vertical highbay/ mediumbay luminaire (with glass) suitable for High Pressure elliptical coated Sodium Vapour/ Metal Halide lamp upto 250W.
Specifi cation
HousingElegantly designed deep drawn sleek front opening housing.
CoverThrermal shock proof, impact resistant, tempered and toughened protective 5mm thick glass fi xed to the refl ector by 3 nos toggles.
FinishEpoxy powder coated grey color after phosphochromate treatment.
OpticsSpun aluminium refl ector electrochemically brightened, anodised outside and sand blasted from inside.
Lamp HolderCeramic lamp holder with electrical grade copper contacts fi xed to adjustable lamp holder bracket.
Electric gearPre-wired with power factor improvement capacitor and SI ignitor for reliable ignition upto terminal block, copper wound ferromagnetic ballast supplied separately, to be wired as per instruction.
MountingMounting by means of hook provided on top housing.
Highbay range of luminaires with specially designed refl ectors and suitable for 4x14W, 4x24W, 4x28W & 4x54W T5 FTL Lamps.
Specifi cation
HousingMade up of CRCA sheet steel.
FinishEpoxy powder coated white after phosphochromate treatment.
OpticsRefl ector made up of high purity pre-anodised aluminium sheet. Designed for symmetric light distribution for high vertical illuminance.
Lamp HolderPush fi t type white polycarbonate/ ABS with electrical grade brass contacts.
Electric gearPre-wired with HF high performance electronic ballast (THD<33%) as a standard.Option of high frequency digital ballast (THD<10%) available on request.
MountingProvision for suspension through Ø19 mm conduit or on ceiling with 4 nos. holes of Ø5 mm.
HousingExtruded Aluminium channel with dual compartment, inserting slot for refl ector, hanging clamps and covers.
FinishEpoxy powder coated white after phosphochromate treatment.
Refl ectorAluminium extruded powder coated white after phosphochromate treatment suitable to insert on extruded channel.
Lamp HoldersRotor type white polycarbonate/ ABS with electrical grade brass contacts.
Electric gearPre-wired with high performance electronic ballast (THD<33%) as a standard on aluminium extruded cover for easy instalation and maintenance.Option of high frequency digital ballast (THD<10%) available on request.Option to use 54W T5 fl uorescent lamp available on request.
MountingSuspension by means of steel wire /rod with the help of C clamps provided.
FeaturesSeparate compartments for wiring of PA system/intercom/ display.Aluminum extruded housing to ensure long life and no rusting/ corrosion.Flexible to remove any side refl ector to give wall washer effect.Very easy installation.Easy Maintenance without dismantling trunking channel/refl ector etc.