This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
For quantities greater than listed, call for quote.
For quantities greater than listed, call for quote.• See capacitor section of this catalog for related productsFor quantities greater than listed, call for quote.• See capacitor section of this catalog for related products
Light resistance measured at 10 lux and 2856°K color temperature.Dark resistance measured 10 seconds after removal of 100 lux illumination.
***
Applications:• Exposure meter• Electronic shutter• Color temperature reading
On-resistance measured after light stabilization at 2ft-c after light stabilization at 30ft-c for 16 hours minimum.Off-resistances measured under dark conditions, 5 seconds after on-resistance test.
***
***
Material Characteristics:
Type 4 CdSe• Lowest resistance photocells available• Can be used for "on-off" applications when
low resistance is desired• For use with incandescent or neon lamps
Type 5 CdS• Stable, low memory photocell• Can be used in light measuring applications and
precision low speed switching• For use with incandescent, fluorescent, or neon
lamps
Type 5H CdS• Combines high speed, stability, linearity and uniform color temperature response• Can be used for high speed switching or high stability measuring applications• For use with incandescent, fluorescent, or neon lamps
Type 7 CdS• Moderate speed and ratio• Can be used in general beam breaking applications• For use with incandescent, fluorescent, or neon lamps
Type 7H CdSe• Fast decay time combined with low resistance and high slope• Ideal for fast switching between close light levels where temperature
stability is critical
• Density reading• Optical switch• Photoelectric lamp
Specifications:• Operating temperature: -30°C to +70°C• Cadmium sulfide (CdS) construction• Soldering: 230°C for 3 sec. max. @ 3mm from cell• High sensitivity, high stability
Specifications:• Operating temperature: -50°C to +75°C• Cadmium sulfide (CdS) and cadmium selenide (CdSe) construction• Lead soldering temperature: 240°C max. @ 1.5mm from the case for 5 seconds
For quantities greater than listed, call for quote.
MOUSERSTOCK NO.
524-611-J4-805 3.15 2.84
Price Each
101
DIMENSIONS (IN.)
Applications:• Light and lamp controls• Automatic grain feeders
• Security lighting• "Electric - Eyes"
Specifications:• 12K Ω min. @ 1Ft/C'DL• 250Ω @ 100Ft/C'DL• Maximum power dissipation: 75mW
UL and CSA approvedDesigned for use with the Phihong PSA-15W Series table top power supplies. Can be used with many laptop power supplies.
Fig.100
ColorLengthTypeSize5001 10
LAPTOP / POWER SUPPLY CORD
MOUSERSTOCK NO.
ReplacesBelden#
Rating @250V (A)
Continental Europe, Conductors: 3 x 1.00(mm2)173-4002 J 17811 HO5VV-F 10 2.5 Black 4.25 3.87 3.52 3.20173-6003 K 17811 HO5VV-F 10 2.5 Black 3.60 3.25 2.96 2.69173-7001 L - - - - HO5VV-F 10 2.5 Black 5.28 4.77 4.34 3.94173-6004 M - - - - HO5VV-F 10 2.5 Black 3.60 3.25 2.96 2.69United Kingdom, Conductors: 3 x 1.00(mm2)173-0001 N 17965 HO5VV-F 10 2.5 Black 9.61 8.45 7.69 6.99
Fig.100
Cord Type ColorLength(Meters)
Price Each
5001 10
MOUSERSTOCK NO.
Price EachLengthVoltage
Rating
562-07100-24 P Straight SPT-1 300V 2' Black 1.36 1.26 1.18 1.10562-07145-24 Q 45° SPT-1 300V 2' Black 1.36 1.26 1.18 1.10562-07145-60 Q 45° SPT-1 300V 5' Black 1.86 1.71 1.59 1.48562-07190-24 R 90° SPT-1 300V 2' Black 1.36 1.26 1.18 1.10562-07199-24 O T-Plug SPT-1 300V 2' Black 1.36 1.26 1.18 1.10
Fig.25
ColorStyle Cord Type501 10
Price Each
FAN POWER CORDDesigned for use with the Agusta 4.69" AC Tubeaxial fans. Can be used with all AC fans using.110" x .020" faston terminals with .3125" spacing. Temperature rating: 105°C (max).
MOUSERSTOCK NO.
Fig. AWG Cord Type Termination Length 25
E118750 LR5884-5M
501 10
INTERNATIONAL POWERCORDS
E56356 LL38816
High quality fan power cords designed to be used with Tubeaxial fans.Strain relief is incorporated for added safety.
FAN POWER CORDS
A
D
F
B C
E
G
H I
J K
M
• Temperature range: 105°C • UL rated 10A / 125VAC • CSA rated 7A / 125VAC
N
O QP R
173-21101 H .75mm2/2 VFF 6' Black 3.65 3.20 2.75 2.50173-21103 I 3 conductor 18 AWG SVT 6' Black 3.99 3.41 3.10 2.82173-21102 H 2 conductor 18 AWG SPT-2 6' Black 3.65 3.20 2.75 2.50
432-6101 O 18 SPT-1 T-type 2' 1.78 1.57 1.43 1.30
*†
*
*
*
†
MOUSERSTOCK NO.
Price Each
Control the error-generating effects of ambient electrical interference.
• Low profile molded plug • 100% foil shield• Color: black • Drain wire terminated to ground pin of plug• Color code: CEE • High stranding for extended flexibility
ReplacesBelden#
AWGStrand
ULType
VoltageRating
Three Conductor Shielded173-53100 F 17740 18/3 41/34 SVT 300V 6' 7" 3.70 3.08 2.80 2.51173-0602 E 17725 18/3 41/34 SVT 125VAC/10A 6' 7" 4.09 3.41 3.10 2.82173-0603 G 17753 18/3 41/34 SVT 125VAC/10A 3' 3" 3.70 3.08 2.80 2.51Double Shielded Braid and Foil173-0601 E 17660 18/3 41/34 SVT 125VAC/10A 6' 7" 5.66 4.72 4.29 3.90
Fig.100
Length5001 10
SHIELDED POWER CORDS
NEMA 5-15P Plug
MOUSERSTOCK NO.
ReplacesBelden#
Rating @125V (A)
Size
Two Conductor Types, NEMA 1-15P Plug173-11112 A - - - - 18/2 SPT-1 10 6' Black .88 .83 .78 .74173-11102 B - - - - 18/2 SPT-1 10 6' Black .88 .83 .78 .74173-11123 B - - - - 18/2 SPT-1 10 6' Brown .88 .83 .78 .75173-31102 B - - - - 18/2 SPT-2 10 6' Black 1.17 1.11 1.05 .99Three Conductor Types, NEMA 5-15P Plug173-33121 C - - - - 18/3 SPT-2 10 6' Gray 2.33 1.94 1.76 1.61173-33101 C - - - - 18/3 SPT-2 10 6' Black 2.33 1.94 1.76 1.61173-53101 D 17237 18/3 SVT 10 6' Black 2.80 2.33 2.12 1.90173-53102 D 17239 18/3 SVT 10 8' Black 3.37 2.80 2.54 2.29173-53121 D 176237 18/3 SVT 10 6' Gray 2.80 2.33 2.12 1.90173-73101 D 17405 18/3 SJT 10 6' Black 3.12 2.60 2.36 2.15173-73102 D 17407 18/3 SJT 10 8' Black 3.89 3.25 2.95 2.68173-75102 D - - - - 16/3 SJT 13 8' Black 3.84 3.20 2.91 2.65173-78101 D - - - - 14/3 SJT 15 6' Black 4.33 3.59 3.27 2.94Three Conductor Detachable AC Cord Set, NEMA 5-15P Plug173-63101 E 17250 18/3 SVT 10 7'6" Black 3.98 3.34 2.99 2.70173-63102 E - - - - 18/3 SVT 10 8' Black 4.16 3.45 3.14 2.82173-63121 E 17250 18/3 SVT 10 7'6" Gray 3.98 3.34 2.99 2.70
Fig.100
Type ColorLengthPrice Each
5001 10
POWER SUPPLY CORDSBoth two and three conductors types are offered in 6', 7 1/2', and 8' lengths with molded, low profile, crush resistant, NEMA1-15P or 5-15P plugs. 18 AWG types are rated 125V, 1250 watts. 16 AWG type is rated 125V, 1625 watts. 14 AWG type israted 125V, 1875 watts. All are UL listed and CSA certified.
Manufacturers Type CSTLS Series81-CSTLS2M00G53-B0 C CSTLS2M00G53-B0 2.00 0.50% .63 .60 .56 .4981-CSTLS16MOX53-B0 C CSTLS16MOX53-B0 16.00 0.50% .97 .92 .86 .76Manufacturers Type CSTS Series81-CSTS0358MG03 D CSTS0358MG03 3.58 0.50% .45 .42 .40 .3581-CSTS0400MG03 D CSTS0400MG03 4.00 0.50% .45 .42 .40 .3581-CSTS0600MG03 D CSTS0600MG03 6.00 0.50% .45 .42 .40 .3581-CSTS0800MG03 D CSTS0800MG03 8.00 0.50% .53 .50 .47 .4181-CSTS1000MG03 D CSTS1000MG03 10.00 0.50% .60 .57 .53 .47Manufacturers Type CSTCC Series81-CSTCC2.0MG-TC E CSTCC2.00MG-TC 2.00 0.50% .97 .91 .86 .7581-CSTCC3.58MG-TC E CSTCC3.58MG-TC 3.58 0.50% .75 .71 .67 .5981-CSTCC6.00MG-TC E CSTCC6.00MG-TC 6.00 0.50% .74 .70 .66 .5881-CSTCC8.00MG-TC E CSTCC8.00MG-TC 8.00 0.50% .81 .77 .72 .6381-CSTCC10.00MG-TC E CSTCC10.00MG-TC 10.00 0.50% 1.15 1.09 1.03 0.90Manufacturers Type CSTCR Series81-CSTCR4M00G53 F CSTCR4M00G53-RO 4.00 0.50% .86 .81 .77 .6781-CSTCR4M19G53 F CSTCR4M19G53-RO 4.19 0.50% .74 .70 .66 .5881-CSTCR4M91G53 F CSTCR4M91G53-RO 4.91 0.50% .76 .72 .68 .5981-CSTCR5M00G53 F CSTCR5M00G53-RO 5.00 0.50% .86 .81 .77 .6781-CSTCR6M00G53 F CSTCR6M00G53-RO 6.00 0.50% .75 .71 .67 .59Manufacturers Type CSTCV Series81-CSTCV12.00MTJ0C4 G CSTCV12.00MTJ0C4-TC 12.00 0.50% 1.34 1.27 1.19 1.05 81-CSTCV16.00MX40C4 G CSTCV16.00MX40C4-TC 16.00 0.50% 1.47 1.39 1.31 1.15
Ceramic Resonators, Filters, and Tuning Fork Crystals
MOUSERSTOCK NO.
Washable81-CSB400J A CSB400J 400 0.50% 1.39 1.32 1.24 1.0881-CSB455J A CSB455J 455 0.50% 1.15 1.09 1.02 .9081-CSB480J A CSB480J 480 0.50% 1.15 1.09 1.02 .9081-CSB500J A CSB500J 500 0.50% 1.15 1.09 1.02 .9081-CSB640JR A CSB640JR 640 0.50% 1.39 1.32 1.24 1.0881-CSB800J A CSB800J 800 0.50% 1.05 .99 .93 .8181-CSB1000J A CSB1000J 1000 0.50% .89 .84 .80 .70Non-Washable81-CSB400P B CSB400P 400 0.50% .72 .68 .64 .5681-CSB455E B CSB455E 455 0.50% .67 .64 .60 .5281-CSB480E B CSB480E 480 0.50% .67 .64 .60 .5281-CSB500E B CSB500E 500 0.50% .71 .67 .63 .55
Fig.Murata
Part No.Freq.(kHz)
TolerancePrice Each
1 10 100 500
MOUSERSTOCK NO.
Fig.Murata
Part No.Freq.(MHz)
TolerancePrice Each101 100 500
DIMENSIONS (IN.)
AThe CSB Series of ceramic resonators is designed to provide the design engineer with a rugged, relatively low frequency device in thefrequency range of 375kHz to 1250kHz. Initial frequency tolerance is +/-0.5% which compares very favorably to the nominal +/-2%-3% requirements of one chip microprocessors. The CSB Series utilizes the area vibration mode of the piezoelectric ceramic element.
The CST Series of ceramic resonators feature a bulit-in load capacitance. This feature eliminates any need for external loadingcapacitors and reduces component count, increases reliability and reduces size. These units are offered in the frequency range from1.80MHz to 60.00MHz with an initial frequency tolerance of +/- 0.5%.
CSB SERIES CERAMIC RESONATORS
CST SERIES CERAMIC RESONATORS
B
C D
E
MOUSERSTOCK NO.
520-TFC3X8 F 32.768 kHz 12.5 .30 .27 .21520-TFC327 G 32.768 kHz 8 2.63 2.35 1.89520-TFC100 G 1.000000 MHz 8 7.15 6.45 5.15
LoadCapacitance
Fig. FrequencyPrice Each
1 10 100
• Operating temp.: -10°C to +60°C • Frequency tolerance: 0.032768MHz = ±20ppm; 1.000000MHz = ±3000ppm
TUNING FORK CRYSTALS
MOUSERSTOCK NO.
520-ZTT358MG A 3.580000 30pf .54 .46 .40520-ZTT400MG A 4.000000 30pf .54 .46 .40520-ZTT600MT A 6.000000 30pf .54 .46 .40520-ZTT800MT A 8.000000 30pf .54 .46 .40520-ZTT1000MT A 10.000000 30pf .54 .46 .40520-ZTT1200MT A 12.000000 30pf .54 .46 .40520-ZTT1600MX A 16.000000 30pf .54 .46 .40520-ZTT2000MX A 20.000000 30pf .54 .46 .40520-ZTA358MG B 3.580000 None .43 .37 .32520-ZTA400MG B 4.000000 None .43 .37 .32520-ZTA600MT C 6.000000 None .43 .37 .32520-ZTA800MT C 8.000000 None .43 .37 .32520-ZTA1000MT C 10.000000 None .43 .37 .32520-ZTA1200MT C 12.000000 None .43 .37 .32520-ZTA1600MX C 16.000000 None .43 .37 .32520-ZTA2000MX C 20.000000 None .43 .37 .32
Built-InCapacitanceFig.
Frequency(MHz)
Price Each1 10 100
• Operating temp.: -20°C to +80°C • Frequency accuracy (@25°C): ±0.5% • Aging for 10 years: ±0.3% Specifications:• Operating temp.: -20°C to +70°C
10.7 MHz MONOLYTHIC CRYSTAL FILTERS
MOUSERSTOCK NO.
520-107-7.5A D 10.7 2 3.75 0.5 1.5 3.30 2.97 2.80520-107-7.5B D 10.7 4 3.75 1.0 2.5 7.50 6.75 6.38520-107-15A E 10.7 2 7.5 0.5 2.0 2.00 1.80 1.70520-107-15B E 10.7 4 7.5 1.0 2.5 4.00 3.60 3.40
Manufacturers Type DS306 Series81-DS306Y5S470M50 A DS306-55Y5S470M50 47 50 20% None .80 .44 .32 .3081-DS306Y5S101M50 B DS306-55Y5S101M50 100 50 20% None .70 .39 .29 .2681-DS306FZ103Z50 B DS306-55FZ103Z50 10000 50 80%-20% None .70 .39 .29 .26Manufacturers Type DSS306 Series81-DSS306Y5S470M100 A DSS306-55Y5S470M100 47 100 20% Internal .90 .50 .36 .3481-DSS306Y5S101M100 A DSS306-55Y5S101M100 100 100 20% Internal .80 .44 .32 .3081-DSS306Y5S271M100 A DSS306-55Y5S271M100 270 100 20% Internal .90 .50 .36 .3481-DSS306Y5S471M100 A DSS306-55Y5S471M100 470 100 20% Internal .90 .50 .36 .3481-DSS306Y5S102M100 A DSS306-55Y5S102M100 1000 100 20% Internal .90 .50 .36 .3481-DSS306Y5U222Z100 A DSS306-55Y5U222Z100 2200 100 80%-20% Internal .90 .50 .36 .34
Manufacturers Type DSS310 Series81-DSS310Y5S220M100 C DSS310-55Y5S220M100 22 100 20% Internal 1.10 .61 .44 .4181-DSS310Y5S470M100 C DSS310-55Y5S470M100 47 100 20% Internal 1.10 .61 .44 .4181-DSS310Y5S271M100 C DSS310-555S271M100 270 100 20% Internal 1.10 .61 .44 .4181-DSS310Y5S222M100 C DSS310-55Y5S222M100 2200 100 20% Internal 1.10 .61 .44 .4181-DSS310BL222M100 C DSS310-55BL222M100 2200 100 20% Internal 1.10 .61 .44 .4181-DSS310Y5S223S50 C DSS310-55Y5S223S50 22000 50 50%-20% Internal 1.10 .61 .44 .41Manufacturers Type DST310 Series81-DST310Y5S271M100 D DST310-55Y5S271M100 270 100 20% External 1.20 .66 .48 .4581-DST310Y5S222M100 D DST310-55Y5S222M100 2200 100 20% External 1.20 .66 .48 .4581-DST310Y5S223S50 D DST310-55Y5S223S50 22000 50 50%-20% External 1.20 .66 .48 .45
Features:• Suitable for flow and reflow soldering• Wide temperature range• High Z characteristics
Applications:• Computer and peripherals interfaces• Compact digital equipment• Compact PPC, electronic typewriters, other electronic equipment and appliances• Helps all electronic equipment and appliances meet FCC, VDE and CISPR regulations• STD footprint for high density mounting
Applications:• I/O ports, DC power lines,
and signal lines
BLM_ _B Series Designed for High Speed Signals
Features:• Designed to reduce noise above operating
frequencies from 10 to 100MHz• High impedance characteristics• Small size• Suitable for flow and reflow soldering
Applications:• Computers and peripheral equipment• Consumer products• High speed circuits• Suitable for circuits with unstable ground
BLM_ _P Series Designed for Low DCR High Current
Features:• Suitable high frequency noise suppression
over wide frequency range• Current rating up to 6A• Small package size - EIA STD 063/085/1206 and 1806• Nickel barrier terminations provide excellent solder heat resistance• Low DCR
Applications:• High current DC power lines• Circuits where a stable ground is unavailable
1
Price Each
500 1000Imped.
100MHzCaseCode
MurataPart No.
RatedCurrent
(mA)
DCRΩ
Max.
For quantities greater than listed, call for quote.
For quantities greater than listed, call for quote.
Disc-type EMIFIL®, DSS310 and DST310 are T-type EMI suppression filters. The disc-type EMIFIL increases the self-resonant frequency of the capacitor byattaching two lead wires to one of the electrodes of the capacitor and increases the insertion loss by adding inductance to the lead in the DST and DSStypes only. Frequencies to be suppressed can be selected by choosing the capacitance. They are also recommended for use as by-pass capacitors.
SMD Chip InductorsLQG11A SERIES MONOLITHIC AIR CORE
Comprised of chip coils with a tight inductance tolerance, achieved in a small chip area. Murataachieves this by forming the coil with precision film technology. This coil is excellent in the high-frequency circuits of telecommunication equipment.
LQP11A SERIES THIN PROFILE AIR CORE
Features:• High-Q characteristics• Small size 0603 is suitable for small portable
equipment, especially card size equipment• Test frequency: 100MHz• Operating temperature range: -40°C to +85°C• The external electrodes with nickel barrier structure
provide excellent solder heat resistance
Applications:• High frequency circuit of telecommunication equipment
• Tight tolerance enables assembly without tuning• High SRF due to low stray capacitance provides
stable inductance in high frequency circuits• Test frequency: 500MHz• Operating temperature range: -40°C to +85°C• The external electrodes with nickel barrier structure
For quantities greater than listed, call for quote.
The LQHIC AND LQH3C Series are subminiature chip coils with low DC resistance, high current capacity andhigh impedance characteristics.
LQH1C/3C/4C SERIES CHOKE
LQH1C:• The sub-minature dimensions (3.2x1.6x1.8mm) allow parallel
mounting on 2.5mm centers.At 0.12uH these coils have a maximum current rating of 970mA.
The LQH Series chip coil comprises subminiature chip inductors wound on a special ferrite core. These inductorshave a high Q at high frequencies and low DC resistance making them suited for enhancing the performance ofelectronic circuits in video communications and audio equipment.
Magnetically shielded chip coils developed with multilayerprocess technology and magnetic materials. It is one-quarterthe size of conventional chip coils and has high reliability.
LQG21N SERIES MAGNETICSHIELDED GENERAL USE
MOUSERSTOCK NO. 1001
Price Each
500 1000Value Tol.
EIASize
MurataPart No.
Applications:• Low current power line (for choke use)
For quantities greater than listed, call for quote.
TestFreqMHz
SRFMin.MHz
RdcMax.Ohms
IdcMaxmA
PricePer Reelof 500
For quantities greater than listed, call for quote.
Tol.Price EachImp.
(Ω)Frequency
(MHz)
DCRMax(Ω) 1 10 50
Rated DCCurrent
(mA)
PricePer Reelof 3000
ILB-1206 MULTILAYER FERRITE BEADS
MOUSERSTOCK NO.Features:
High reliability Surface mountable Temp. range: -55°C to +125°C
Environmental Specifications: Thermal shock: 50 cycles, -55°C to +125°C Humidity: 90%RH @ + 40°C with 200mA DC current, 500 hours Load life: + 90°C @ full rated current for 2000 hours
MOUSERSTOCK NO.
To order reels add "/R" to MOUSER STOCK NO.
To order reels add "/R" to MOUSER STOCK NO.
For quantities greater than listed, call for quote. To order reels add "/R" to MOUSER STOCK NO.
Induc.Tol.
Price EachMOUSERSTOCK NO.
L(nH)
QMin
TestFreqMHz
SRFMin.MHz
RdcMax.Ohms
PricePer Reelof 30001 10 50
IdcMaxmA
Induc.Tol.
Price EachMOUSERSTOCK NO.
L(µH)
QMin 1 10 50
For quantities greater than listed, call for quote.
TestFreqMHz
SRFMin.MHz
RdcMax.Ohms
IdcMaxmA
PricePer Reelof 2000
For quantities greater than listed, call for quote.
Induc.Tol.
Price EachMOUSERSTOCK NO.
L(nH)
QMin
TestFreqMHz
SRFMin.MHz
RdcMax.Ohms
PricePer Reelof 30001 10 50
IdcMaxmA
IMC-0603 COATED SURFACE MOUNT INDUCTORS
High self-resonant frequency values High Q values relative to size at higher frequencies Coated coil provides protection and moisture resistance Compatible with vapor phase and infrared reflow soldering
Inductance and Q measured on HP4191A SRF measured on HP8753B Temperature range: -40°C to +85°C Core material: non-magnetic
DIMENSIONS (IN.)
IMC-0805 MOLDED SURFACE MOUNT INDUCTORS
Features: High self-resonant frequency values High Q values relative to size at higher frequencies Molded construction provides superior strength
and moisture resistance Wirewound construction
Specifications: Inductance and Q measured on HP4191A SRF measured on HP8753B Temperature range: -40°C to +85°C Core material: non-magnetic
DIMENSIONS (IN.)
Features: Molded construction provides superior strength and moisture resistance Printed marking Compatible with vapor phase and infrared reflow soldering
Specifications: Inductance tolerance: ±10% Temperature range: -40°C to +105°C Core material: powdered iron for 1.0µH to 100µH,
ferrite for 150µH to 1000µH
IMC-1812 MOLDED SURFACE MOUNT INDUCTORS
DIMENSIONS (IN.)
DIMENSIONS (IN.)
Features: Printed marking Compatible with vapor phase
and infrared reflow soldering Molded construction provides superior
strength and moisture resistance
Specifications: Temperature range: -55°C to +125°C Core material: non-magnetic for .10µH,
Features:• Wide inductance range in small package• Flame retardant coating• Precision performance, excellent reliability, sturdy construction• Epoxy molded construction provides superior moisture protection
Features:• Wide inductance range in small package• Flame retardant coating• Precision performance, excellent reliability, sturdy construction• Epoxy molded construction provides superior moisture protection
For quantities greater than listed, call for quote.
MOUSERSTOCK NO. 1
Price Each Price PerReel of 2000100 500
TestFreq.(MHz)
DCRes.
(max.Ω)
RatedDC
(mA)
L(µH)
Q(min.)
SRF(MHz)
±10% Tolerance For quantities greater than listed, call for quote.
MOUSERSTOCK NO.
Price Each Price PerReel
1
EIASize
Imped.(Ω) @
100MHz
DCResist.
(Ω)max.
RatedCurrent
(mA)max. 100 500
Qty.PerReel
To order reels add "/REEL" to Mouser Stock No. For quantities greater than listed, call for quote.
MOUSERSTOCK NO. 1
Price Each Price Per Reel of 50010 100
TestFreq.(MHz)
SRF(MHz)
DCRMax.(Ω)
L(µH)
Q(min.)
RatedDC
(mA)
For quantities greater than listed, call for quote.
1812 MAGNETIC SHIELDED WIREWOUND SMD INDUCTORS
Specifications:• Temperature rise: 20°C (max.)• Ambient temperature: 80°C (max.)• Operating temperature: -20°C to +100°C• Storage temperature: -40°C to +100°C
Features:• Very strong solderability• Can be mounted automatically• Terminals are highly resistant to pull forces• Highly resistant to mechanical shocks and pressure
To order reels add: " /Reel " to Mouser Stock No.
DIMENSIONS (mm)
0805A SERIES WIREWOUND SMD INDUCTORS
TAPING SPECIFICATION
MOUSERSTOCK NO.
Price Each
5001001
TestFreq.(MHz)
DCRes.
(max.Ω)
RatedDC
(mA)
L(µH)
Q(min.)
SRF(MHz)
For quantities greater than listed, call for quote.
Features:• Soldering methods: wave,
reflow, vapor phase• Solderability: 260°C max., 10 seconds• Operating temp.: -55°C to +125°C• Resistance to solvent: conform to
on reel (ø 180mm) PAD-metallization: Ceramic: tungsten-
nickel with gold flash Suface finishing: Epoxy moulded flat
top for perfect component centering and vacuum pickup
DIMENSIONS (mm)
DIMENSIONS (mm)
FERRITE CHIP BEADS
Ferrite Chip Beads provide an effective means ofEMI/RFI attenuation for electronic equipment. Theseitems are specially designed for flow, reflow, andwave soldering applications.
DIMENSIONS (mm)
Specifications: Impedance tolerance: ±25% Operating temperature: -25°C to 85°C Storage temperature: -40°C to 85°C
These choke coils are UL recognized and feature an inductance of 0.15µH to 1000µH, capable of handling currentsfrom 55mA to 1.35 amps. They are more economical than molded chokes and require no more board space than a1/2 watt resistor. Tape and reel, ammo pack, and formed leads are available upon request.
• EIA color coded• Operating temperature:IEC climactic category:
55/125/56; DIN climactic category: FKF: -55 to 125°C, humidity category F
MOUSERSTOCK NO.
L(µH)
Price Each
1 100 500 1000Fig.
Tol.%
DCRMax.(mΩ)
Max DCCurrent
(A)
High Current Chokes For quantities greater than listed, call for quote.
MOUSERSTOCK NO.
L(µH)
Price Each
1 100 500 1000Fig.
Tol.%
QMin.
TestFreq.(KHz)
Res.Freq.(MHz)
DCRMax.(Ω)
Max DCCurrent
(mA)
Low Current Chokes For quantities greater than listed, call for quote.
CHOKE COILSThese choke coils feature inductances from 0.7µH to 33,000µH capable of handling currents from 50mA to 7 amps.Their ferrite cores allow smaller forms, requiring less board space. Formed, tape and reel, and ammo packagingare available on request. Call our full service line, (800) 346-6873 for quote.
C
DIMENSIONS (IN.)
BA
EPOXY CONFORMAL COATED CHOKES
MOUSERSTOCK NO.
Miniature Choke Coils (Cont.)
L(µH)
Price Each
1 100 500 1000
Dimensions (In.)
A B CChoke
Coil Type
Tol.%
QMin.
TestFreq.(MHz)
Res.Freq.(MHz)
DCRMax.(Ω)
Max DCCurrent
(mA)
For quantities greater than listed, call for quote.
MOUSERSTOCK NO.
Micro Miniature Choke Coils
L(µH)
Price Each
1 100 500 1000Tol.%
QMin.
TestFreq.(MHz)
Res.Freq.(MHz)
DCRMax.(Ω)
Max DCCurrent
(mA)
For quantities greater than listed, call for quote.
Miniature Choke Coils For quantities greater than listed, call for quote.
Small Choke Coils For quantities greater than listed, call for quote.
MOUSERSTOCK NO.
L(µH)
Price Each
1 100 500 1000Fig.
Tol.%
QMin.
TestFreq.(kHz)
Res.Freq.(MHz)
DCRMax.(Ω)
Max DCCurrent
(mA)
Medium Current Chokes For quantities greater than listed, call for quote.
Features: Insulation strength: 2.0KV (epoxy coated) Operating temp.: -25°C to +85°C, ∆ L/L (25°C) <±10% EIA color coded
Axial leads Inductance test freq.: High current chokes: 1MHz;
Features: UL recognized and VDE approved Direct cross to Epcos
suppression coils
500L 1000
L(µH)
Fig.Max DCCurrent
(A)
Price EachDimensions (In.)
1 100D H
DCRMax(mΩ)
Miniature Suppression Coils - Iron Oxide Core
Small Suppression Coils - Iron Oxide CoreFor quantities greater than listed, call for quote.
Medium Suppression Coils - Iron Oxide Core For quantities greater than listed, call for quote.
L
MOUSERSTOCK NO.
L(µH)
Max DCCurrent
(A)
Dimensions (In.)
D H
DCRMax(mΩ)
Medium Suppression Coils - Ferrite Core
Large Suppression Coils - Iron Oxide CoreFor quantities greater than listed, call for quote.
Fig.
High Current Suppression Coils - Ferrite CoreFor quantities greater than listed, call for quote.
500 1000
Price Each
1 100A
B
For quantities greater than listed, call for quote.
E169264
RFI SUPPRESSION COILS
These RFI suppression coils feature inductance ranges from 1µH to 10,000µH capable of handling currents from 80mA to 12 amps. Non-standard values and tape/reel packaging are available on request.
Specifications: Operating temperature range: -55°C - +125°C Dielectric insulation strength: 2.5KV Inductive tolerance: ±20% Rated inductance measured at : 1MHz for L ≤ 10µH
100kHz for 10µH < L ≤ 1000µH10kHz for L > 1000µH
For quantities greater than listed, call for quote.
434-2100 A 1 20 15 2.53 2.11 1.91434-2250 A 2.5 30 26 2.53 2.11 1.91434-2500 B 5 30 48 2.92 2.43 2.21
Price EachSeries
1 100 500 1000L D
For quantities greater than listed, call for quote.
Dim. (in.)
ECONOMY ENCAPSULATED RF CHOKES
Miniature fixed inductor wound on a ferrite core and resin encapsulated into amolded plastic case. These RF chokes exhibit excellent moisture resistance andvibration endurance.
Bead Kit II623-019911 This kit contains an assortment of 34 parts, consisting of small shield beads, beads 79.20
on leads, and multi-aperture cores.Expanded Cable and Connector EMI Suppressor Kit623-019905 This kit contains a selection of large shield beads, one and two piece cable 79.20
suppressor cores and a number of suppressor plates for connectors. Cores aresupplied in either Fair-Rite 43 or 44 material, chosen for its high impedance over awide frequency range. The kit also has polypropylene cases with flammability rating UL94-V0 and steel clips for assembly of the split cable suppression cores.
Expanded Bead-on-Lead EMI Suppressor Kit623-019910 Twenty-four wired beads in three basic design geometries are included in this kit. 79.20
These beads are supplied in three suppressor materials: 73, 43, and 61.Surface Mount Bead Kit623-019914 Twelve surface mount beads in five geometries are in this engineering kit. These 50.00
surface mount beads are for use in differential and common-mode applications. Thesuppression materials43, 44, and 73 are all included in this kit.
Chip Bead Kit623-019918 This kit provides 20 different chip bead parts in four different EIA standard package 63.36
sizes. It contains low current, medium current, as well as high current chip beads.Also included in this kit are a selection of low, standard, and high signal speed parts.
MOUSERSTOCK NO.
PriceEachDescription
Price EachDimensions (In.)
EMI SHIELD BEADSBeads with a "1" as the last digit of the part numberare not burnished, those with the last digit "2" aresupplied burnished to break the sharp edges.
MOUSERSTOCK NO.
Impedance (Ω)@100MHz 1A B C 100 500 1000
For quantities greater than listed, call for quote.
Applications:• Recommended suppression material of
unwanted signals between 30MHz and 200MHz
Price EachDimensions (In.)
The rugged construction decreases DC resistance and increasescurrent carrying capacity compared with plated beads.
MOUSERSTOCK NO.
Imp. (Ω)@100MHz 1DCBA 100 500 1000
For quantities greater than listed, call for quote.Features:• The copper conductors have a 200 µinch
thickness tin/lead coating.• The maximum current rating for these
beads is 5 amps.
DIMENSIONS (IN.)
Price EachDimensions (In.)
EMI SUPPRESSION CORES WITH CASES
EMI SUPPRESSION EVALUATION KITS
Flat Cable Cores with Cases
Round Cable Cores with Cases
MOUSERSTOCK NO.
Imp. (Ω)@100MHz 1A B C D E 10 50
For quantities greater than listed, call for quote.
• Case material: Polypropylene • Flammability rating: UL94-V0
DIMENSIONS (IN.)
For quantities greater than listed, call for quote.
SURFACE MOUNT EMI SHIELD BEADS
DIMENSIONS (IN.)
Price EachDimensions (In.)
Shield beads are supplied assembled ontinned copper wire to aid automated circuitassembly. Wires are oxygen free highconductivity copper with a 95/5 tin/leadcoating.
MOUSERSTOCK NO.
Imp. (Ω)@100MHz 1DB CA 100 500 1000
For quantities greater than listed, call for quote.
EMI SHIELD BEADS ON LEADS
DIMENSIONS (IN.)
Price EachMOUSERSTOCK NO.
Imp. (Ω)@100MHz
WireSize
WireLength
(In.)Turns
1Fig.
100 500 1000
For quantities greater than listed, call for quote.
Wire used for winding areoxygen free high conductivitycopper with a tin/lead plating.
WOUND EMI SHIELD BEADS
These kits assist the design and field engineers and are designed to reflect thedifferent mechanical and frequency requirements of all types of EMI suppressionapplications. Each kit contains a sampling of suppression cores for use in theoriginal design phase or in situations where a retrofit proves necessary. Each kitcomes in a clear plastic case with blue foam packing.
Specifications:• Varnish impregnated• Core material: L ≤ 15000µH, iron
L ≥ 33000µH, ferrite
Specifications:• L ≤ 4µH measured on Q meter @ 7.9 MHz• L ≥ 40µH measured on 1 kHz bridge• Inductive tolerance: ±20%
Special Features:• DC-DC converter, EMI filter applications• Low radiation• Low core loss• High current capacity
Special Features:• Low cost, low DCR• High current capacity• Varnish coated• Operating temperature -55 to +105°C• Ideal for use as EMI filter, output choke, smoothing coil• Current to cause 10% maximum inductance drop or 35°C maximum termperature rise
Price EachMOUSERSTOCK NO.
L(µH)
RdcMax.Ohms
IdcMax
Amps
CoilDia.Max.
FormLength
CoreMaterial 1 100 250
HEAVY DUTY HASH CHOKES
Specifications:• Epoxy conformal coated• Operating temperature: -55°C to +105°C
SPLIT-PACK® POWER TRANSFORMERS Single Primary 115V, 6 Pins
Dual Primary 115V/230V, 8 Pins
The Triad Split-Pack® split bobbin transformer from MagneTek is an extremely versatile tool for PC boardapplications. Split-Pack® transformers are nonconcentrically wound with primaries and secondaries side-by-side.Unlike the secondary on-top-of-primary designs of standard PC board transformers, the split-bobbin winding andlow capacitive coupling eliminate costly electrostatic shielding.
Features:•Primary: 115/230VAC 50/60Hz•Hi-pot tested at 2,500VRMS
•Class B UL recognized•PC terminal pin spacing for accurate placement
Series connections: 230VACPrimary: input 1 and 4, connect 2 and 3Secondary: output 5 and 8, connect 6 and 7
Parallel connections: 115VACPrimary: input 1 and 2, connect 1 and 3, 2 and 4Secondary: output 5 and 6, connect 5 and 7, 6 and 8
The Triad Quick Pack® offers a significant reduction in size and weight for a given VA rating. They are available in 5 sizes for a widevariety of applications. Quick Pack® transformers are bobbin wound for reduced size and small operating space, plus split bobbinnonconcentric winding eliminates costly electrostatic shielding. Termination is suitable for quick connects or soldering.
Features:•Hi-pot tested at 2,500VRMS
•Class B insulation for max temperature of 130°C
•Terminal size is .187" x .021"•UL recognized•Mounting hole size: 0.188"
*
DIMENSIONS (IN.)
DIMENSIONS (IN.)
For quantities greater than listed, call for quote.
For quantities greater than listed, call for quote.
For quantities greater than listed, call for quote.
The Triad Flat Pack power transformer from Magnetek is designed to meet the needs of low clearance PC boardand solid state power designs. These units can also be used for control and instrumentation applications.Voltages and currents were chosen for widely used power applications. It is offered in a dual primary and dualsecondary configuration.
Features:• Split bobbin with side-by-side windings to
reduce capacitance and eliminate the need for a static shield
• Low profile: Allows 3/4" card spacing for 2.5 VA units, allows 1" card spacing for 6 VAunits, allows 1 1/4" card spacing for 12 VA units
Specifications:• Hi-pot tested at 2000 VRMS • Primary: 115/230VAC, 50/60Hz
ISOLATION POWER TRANSFORMERSFor isolating equipment from direct connection to the power line. Theprimary and secondary are nonconcentric precision wound on separatearbors, assembled on a laminate core side by side separated by insulation.This prevents electrical connection, under normal or overload conditions,between the primary and secondary windings.
Specifications:• Secondary voltage: ±5%• Leakage current from primary to
secondary is rated at less than 50µA and is typically measured at less than 10µA
• Hi-pot tested at 1500V• Units with "M" suffix have 2-wire 6' cord,
plug and socket.• Line cord, plug and receptacle are UL listed
§= Split winding Has 2 wire plug, cord, and socket*
STEP-UP/STEP-DOWN AUTOTRANSFORMERSSingle winding transformers in which the primary coil is a fraction of the entire winding forvoltage step-up or the secondary coil is a fraction of the entire winding for voltage step-down.
Specifications:• 50/60Hz line frequency• Hi-pot tested at 1,500 VRMS
• Secondary voltage: ±5
• Units with "M" suffix have 2-wire 6' cord, plug and socket
• Units with "MG" suffix have 3-wire 6' cord, plug and socket
553-N1X A 50 230 115 0.435 0.188 2.281 3.688 2.0 3.125 - - - 11.01 9.36 8.37553-N2X A 100 230 115 0.87 0.188 2.625 4.0 2.063 3.625 - - - 16.18 13.75 12.30553-N3M B 85 230 115 0.74 0.375 x 0.188 3.594 2.969 2.875 2.813 1.625 29.31 24.86 22.00553-N4M B 150 230 115 1.3 0.375 x 0.188 3.594 2.969 3.625 2.25 2.375 40.36 34.31 30.67553-N4MG B 150 230 115 1.3 0.375 x 0.188 3.594 2.969 4.25 2.25 2.875 54.98 46.73 41.78553-N6U D 200 230 115 1.7 0.203 x 0.375 3.375 2.813 2.813 2.25 2.25 31.36 26.65 23.83553-N5M B 250 230 115 2.17 0.375 x 0.188 3.875 3.281 4.25 2.50 3.0 47.24 38.65 35.90553-N5MG B 250 230 115 2.17 0.375 x 0.188 3.875 3.281 4.813 2.50 3.5 67.60 57.46 51.38553-N7M B 600 230 115 5.22 0.375 x 0.188 4.625 3.938 5.0 3.0 3.875 56.04 47.53 42.06553-N7MG B 600 230 115 5.22 0.375 x 0.188 4.625 3.938 5.0 3.0 3.875 76.02 64.62 57.78553-N9MG B 1250 230 115 10.85 0.656 x 0.28 5.313 4.50 6.0 3.50 4.50 150.29 127.75 114.22553-N150MG B 150 115 230 0.65 0.375 x 0.188 3.594 2.969 3.313 2.25 2.125 54.98 46.73 41.78553-N250MG B 250 115 230 1.1 0.375 x 0.188 3.875 3.25 3.688 2.25 2.438 67.60 57.46 51.38553-N1000MG B 1000 115 230 4.35 0.5 x 0.25 5.375 4.50 5.50 3.50 4.125 125.96 106.99 95.73
Has 2 wire plug, cord, and socket*
MOUSERSTOCK NO.
For quantities greater than listed, call for quote.
For quantities greater than listed, call for quote.
Use these power supply transformers for direct use or in transformer, rectifier, and filter circuits. They are single primary with single or double and multiple secondaries in standard size and weight configurations.
PC Mount Dual Primary 115/230 VAC, 50/60Hz, Dual Secondaries
Primary: 115 VAC, 50/ 60 Hz Triple Output Secondaries for ± 15 VDC and + 5VDC
May be connected in series to obtain combined voltage when properly phased. Current is equal to current of lowest winding.Ex.: Two 6.3V windings @ 2A in series would be 12.6VAC @ 2A. May also be connected in parallel to obtain combined current.Example: Two 6.3V windings @ 2A in a parallel would be 6.3VAC @ 4A.
These Hi-Q power transformers feature 115VAC/60Hz primaries, in six popular outputs. They have 6" color coded leads for positive identification. UL rating on many of these allow for hassle-free design of finished products.
*
Heavy Duty Power Transformers
• Lead color coding: primary = black, secondary = red/white• Full load voltage tolerance: ±2%• Voltage regulation: <15%• Hi-pot test voltage: 1500VAC 60Hz for 1 minute• Coil-to-coil insulation: 200MΩ @ 500VDC As indicated
E93874(S)
POWER TRANSFORMERS
A B C D E F
A B C D E F
For quantities greater than listed, call for quote.
VARIABLE TRANSFORMERS AC VOLTAGE CONTROLS
Open models are for back of panel mounting. Equipped with screwtype or solder connection and adapters for 1/4" push-on connectors.Portable cord and plug models feature ventilated steel case, on-offswitch, pilot light, fuse, 3 prong grounded cord with matchingreceptacle.
MOUSERSTOCK NO.
DIMENSIONS (IN.)
Features:• Non-isolated• 240V models will operate with
either 120V or 240V input• All models 50/60Hz except
Features:• Operating temperature: 0°C to 70°C• Compact footprint
1000 SERIES PULSE TRANSFORMERS
CONVERTER TRANSFORMERS
Features:• Industrial standard pinout• Fully encapsulated• MAX253 compatible• Operating temperature: -40°C to 85°C
78253 SERIES
Features:• Standard pinout• Fully encapsulated• Maxim compatible• Operating temperature: -40°C to 85°C
The 78253 Series of converter transformers are designed for use withthe MAX253 chip set to provide isolated power supplies. A centre tappedsecondary winding allows for full bridge, half bridge or voltage doubling.
The 78250 Series of converter transformers are specificallydesigned for use with Maxim chip sets to provide isolated RS232interfaces. Carefully controlled turns ratios ensure consistentperformance whilst a toroidal construction minimizes EMI.
For quantities greater than listed, call for quote.
NTE SERIES, SMT 1W SINGLE OUTPUT This series of miniature surface mounted DC-DC Converters employ leadframe technology andtransfer moulding techniques to bring all of the benefits of IC style packaging to hybrid circuitry.
NTA SERIES, SMT 1W DUAL OUTPUTThe NTA series of miniature surface mounted DC-DC Converters employ leadframe technology and transfermoulding techniques to bring all of the benefits of IC style packaging to hybrid circuitry.
NTV SERIES, 1W DUAL OUTPUT This series employs lead frame technology and transfer moulding techniquesto bring all of the benefits of IC style packaging to hybrid circuitry.
• 3kVDC isolation (1min.)• Dual isolated output• Efficiency to 82%
• UL 94V-0 package material• No heatsink required• Toroidal magnetics
NMT SERIES, 3W DC-DC CONVERTERS WITH SHUTDOWNThis series is a range of DC-DC converters offering three output voltages of -24V, -48V, and -72V from a singleisolated 5V or 12V input voltage. This product is packaged in an 8 pin SIP case for minimum PCB footprint.
NPH SERIES, 25W SINGLE OUTPUTThis series of DC-DC Converters combines ease of application with versatility. Overload protection of the"constant current" type ensures start-up into complex load conditions. The copper case achieves efficient heattransfer and screening.
• High efficiency to 89%• 1.5KV input to output isolation• UL 1950 Recognized (E179522)
• Industry standard pinout• Constant 350KHZ frequency
• Operation to zero load• Protected against all load faults
NDL SERIES, ISOLATED 2W WIDE INPUT SINGLE OUTPUT The NDL series is a range of high performance miniature DC-DC converters having regulated outputs over thewide temperature range of -40°C to 85°C with no power derating.
• 2:1 wide range voltage input• Continuous short circuit protection
with current foldback
• 0.5% regulation• 1KVDC isolation
• External control• UL 94V-O package materials
NPH SERIES, 15W SINGLE OUTPUTThis series combines ease of application with versatility. The pin pattern is based on the popular industrystandard, but two additional pins may optionally be fitted to provide a variety of features not commonly found onunits of this type.
• Industry standard pinout• Constant 350KHZ frequency
• Operation to zero load• Protected against all load faults
• High efficiency to 89%• 1.5KV input to output isolation• UL 1950 Recognized (E179522)
NDY SERIES, 3W WIDE INPUT SINGLE OUTPUTA range of low profile converters offering a single regulated output over a 2:1 input voltage range.
• 1KVDC isolation• Efficiency to 83%
• UL 94V-0 package material• No heatsink required
• Toroidal magnetics• Fully encapsulated
580-CDROM 2.49
MOUSERSTOCK NO.
PriceEach
C&D TECHNOLOGIES CD-ROMProvides full technical details on all of C&D Technologies'power products including DC-DC converters, inductors, andtransformers. The CD-ROM is supplied with ready-to-installAdobe AcrobatTM Reader software.
DIMENSIONS (IN.)
A B C D
• Triple outputs (-24V, -48V, and -72V)• TTL/CMOS compatible on/off control
Io assumes all 3 channels are equally loaded*SIP580-NML0505S A 5 5 400 .30 .55 .39 14.04 13.62 11.87580-NML0512S A 5 12 167 .30 .55 .39 14.04 13.62 11.87580-NML0515S A 5 15 133 .30 .55 .39 14.04 13.62 11.87580-NML1205S A 12 5 400 .30 .55 .39 14.04 13.62 11.87580-NML1212S A 12 12 167 .30 .55 .39 14.04 13.62 11.87580-NML1215S A 12 15 133 .30 .55 .39 14.04 13.62 11.87
NML SERIES, 2W SINGLE OUTPUTThe NML is the smallest footprint 2 watt DC-DC Converter currently available.
• 1KVDC isolation• Efficiency to 85%
• UL 94V-0 package material• No heatsink required
• Toroidal magnetics• Fully encapsulated
NMH SERIES, 2W DUAL OUTPUTThe NMH offers the smallest footprint of any dual-output 2 watt DC-DC Converter.
NMS SERIES, 6KVDC ISOLATED 2W DUAL OUTPUT The NMS series of DC-DC converters are fully certified to BS EN 60950, this makes them ideal for all telecomand safety applications where approved isolation is required.
• BS EN 60950 certified• 6KVDC isolation
• Efficiency to 80%• UL 94V-O package material
• No heatsink required• No external compomnents required
NPH SERIES, 10W SINGLE OUTPUT This series combines ease of application with versatility. The pin pattern is basedon the popular industry standard, but two additional pins may optionally be fittedto provide a variety of feature not commonly found on units of this type
• High efficiency to 86%• 1.5 kV input to
output isolation
• Industry standard pinout• Surge rating to 12W• Operation to zero load
• Protected against load faults• UL 94V-0 package material
SDP LOW POWER DIN RAIL SERIESCompact DIN Rail power supplies in 1.3 and2.1 Amps at 24V. These compact and efficientunits are designed specifically for the industrialenvironment.
Features:• No tools required for mounting• Adjustable 24-28V output• Overvoltage, short circuit protection• Special industrial overload design• Input Voltage: 85-264VAC, 100-375VDC• Dimensions: 1.77” x 2.95” x 3.58"• Operational Temp Range: -10°C - 70°C
For quantities greater than listed, call for quote.
SCL SERIES, 4 AND 10 WATT CE LINEARSThe Sola 4 and 10 Watt encapsulated linears are available in dual and triple outputsfor applications with sensitive electronics and analog circuitry. These low-noisemodules are capable of being DIN Rail or Chassis mounted.
Features:• Quiet, low noise DC Linear technology• DIN Rail or Chassis mount for easy installation• Rugged encapsulated design.• Two year warranty• Simple snap-on for DIN Rail TS35/7.5
or TS35/15• M3 screw clamp terminations• Chassis mounting possible on
For quantities greater than listed, call for quote.
Output Voltages
SCP SERIES, 30 WATT SWITCHERSThese switchers are compact, rugged power supplies designed to power many industrial control andinstrumentation devices and equipment, with high reliability and tight regulation.
Features:• 5-year warranty• International approvals for global use• DIN Rail or Chassis Mount• IP20 protection• M3 screw clamp terminations• Simple snap-on for DIN Rail TS35/7.5 or TS35/15
For quantities greater than listed, call for quote.
Output Voltages
V3
SDN DIN RAIL SERIESThe SDN family of DIN Rail power supplies have industry leadingperformance with a true industrial grade design and high quality that meetsdifficult industrial environmental conditions.
Features:• Rugged metal case and DIN connector• User-friendly front panel - screw terminals
for #10 AWG/4 mm2, for quick installation• Highly efficient - >90% switching technology• Frequency: 47-63Hz• Operational Temp Range: -10°C - 60°C• Snaps onto DIN Rail (Optional screw mounting available)
1 5
Price Each
Voltage (VAC)
Single Phase663-SDN2.5-24-100 115/230 user 1.3A / 0.7A 24VDC 2.5A (60W) 4.88 x 1.97 x 4.04 155.00 141.05663-SDN4-24-100 115/230 user 2.6A / 1.4A 24VDC 4A (100W) 4.88 x 2.56 x 4.04 239.00 225.00663-SDN5-24-100 115/230 user 2.6A / 1.4A 24VDC 5A (120W) 4.88 x 2.56 x 4.04 239.00 225.00663-SDN10-24-100 115/230 user 6A / 2.8A typ. 24-28VDC Adj. 10A(240W) 4.88 x 4.80 x 4.04 348.00 316.68663-SDN20-24-100 115/230 auto 12A / 6A 24-28VDC Adj. 20A (480W) 4.88 x 8.94 x 4.04 579.00 526.89663-SDN20-24-200 230 5A 24VDC 20A (480W) 4.92 x 8.94 x 4.06 589.00 535.99Three Phase663-SDN5-24-480 3PH 380-480 3.0A / 0.5A 24-28VDC Adj. 5A 4.88 x 2.56 x 4.04 251.00 233.30663-SDN20-24-480 3PH 480 3 x 1.5A 24-28VDC Adj. 20A 4.88 x 8.94 x 4.04 488.00 444.08663-SDN30-24-480 3PH 380-480 3 x 2.0A 24-28VDC Adj. 30A 4.88 x 9.72 x 4.45 646.00 587.86663-SDN40-24-480 3PH 380-480 3 x 3.0A 24-28VDC Adj. 40A 4.92 x 11.1 x 4.45 779.00 719.02Hardware663-SDN-BMBRK Screw mounting set for mounting chassis to DIN Rail (1 per unit) 6.00 5.46
Voltage (nom.)
MOUSERSTOCK NO.
For quantities greater than listed, call for quote.
Input Output
Current (nom.) Current (nom.)
Dimensions (In.)H x W x D
V3
• Chassis mounting possible on -DN Low-Profileversions by removing DIN clips
• Available in Low Profile or Slim Line packages• Dimensions (H x W x D):
Low Profile "-DN" - 4.72" x 2.55" x 1.29"Slim Line "B-DN" - 4.72" x 1.29" x 2.68"
663-SLS-05-030-1T A A 5V @ 3A - - - Yes 45.00 44.10663-SLS-05-060-1T B1 B1 5V @ 6A - - - Yes 67.00 65.66663-SLS-12-017T A A 12V @ 1.7A or 15V @ 1.5A - - - No 45.00 44.10663-SLS-12-034T B1 B1 12V @ 3.4A - - - No 64.00 62.72663-SLS-24-012T A A 24V @ 1.2A - - - No 45.00 44.10663-SLS-24-024T B2 B2 24V @ 2.4A - - - No 64.00 62.72663-SLS-24-036T C C 24V @ 3.6A - - - No 93.00 91.14663-SLS-24-048T D I2 24V @ 4.8A - - - No 124.00 121.52663-SLS-24-072T E K 24V @ 7.2A - - - No 137.00 134.26663-SLS-24-120T F L 24V @ 12.0A - - - No 186.00 182.28663-SLD-12-1010-12T G H1 12V @ 1A or 15V @ .8A -12V @ 1A or -15V @ .8A No 54.00 52.92663-SLD-12-1818-12T H D 12V @ 1.8A or 15V @ 1.5A -12V @ 1.8A or -15V @ 1.5A No 76.00 74.48Over Voltage Protector (OVP)663-SLO-12-000-1 I J1 6.2V to 34V Adjustable @ 8V For Cases B through K 12.00 11.76663-SLO-12-000-TB J J2 6.2V to 34V Adjustable @ 8V For Case A or Cases B through K 12.00 11.76
(when used with a cover)
MOUSERSTOCK NO.
For quantities greater than listed, call for quote.
Fig.CaseStyle
Output1
Built-InOVP
Features:• Two year warranty• Low noise, extremely quiet DC output• Universal input and approvals (115/230VAC)
The Silver Line series follows the industry accepted foot-print for open frame, linear power supplies. Sola improves on thisdesign by offering standard screw terminal connections and optional covers for safety considerations.
GL SERIES - SINGLE OUTPUT SWITCHERS• One year warranty• Universal input
• Compact size• Automatic overload protection
• Over voltage protection on Output # 1• 200W models enclosed with screw terminals
• Input voltage: 85-264VAC• Frequency: 47-440Hz
• Short circuit protected• Built-in OVP on 5V models and optional
on 12, 15, and 24V models
• Automatic resetting overload protection• Industry standard footprint
110W with 25CFM airflow, 80W with convention cooling.*
ETA-USA Switching Power SuppliesBW SERIES AC Input Single Output
•Universal Input: 85V ~ 264V•Mountable on any axis•Meets UL 1950, CSA (C-UL), EN60950•Overvoltage/overcurrent protection•EMI complies with EN55022B, FCC/B
This series is an open-board, low profile switcher without chassisand cover. It is designed for small size applications worldwide. Output power can be boosted 15% to 30% above nominal.
Price Each
1 5 10618-BWS XX SX 10W 1.97 4.13 0.79 28.19 26.43 25.55618-BWM XX SX 15W 1.97 4.92 0.83 35.31 33.11 32.00618-BWT XX SX 30W 2.17 5.24 1.02 47.36 44.40 42.92618-BWB XX SX 50W 2.17 7.68 1.24 58.85 55.17 53.33618-BWC XX SX 75W 2.17 8.74 1.26 76.66 71.87 69.47
PowerLW
Dimensions (In.)
HMOUSER
STOCK NO.
For quantities greater than listed, call for quote.
Available in up to eight output voltagesReplace the XX in the part number with:
3.3 for 3.3V 12 for 12V 24 for 24V 36 for 36V05 for 5V 15 for 15V 30 for 30V 48 for 48V
Not available in 30V, 36V, or 48V outputNot available in 30V output
**
*
*
Price Each
1 5 10618-PFC XX SX 75W 3.74 7.87 1.77 109.10 102.29 98.88618-PFD XX SX 120W 3.74 8.66 2.17 129.02 120.96 116.93618-PFE XX SX 240W 4.33 9.69 2.56 271.95 254.96 246.46
PowerLW
Dimensions (In.)
HMOUSER
STOCK NO.
For quantities greater than listed, call for quote.
Available in three output voltagesReplace the XX in the part number with:
12 for 12V 24 for 24V 36 for 36V
PF SERIES AC Input Single OutputThis series is capable of peak loads up to 200% of rated current. This series has a wide input range with low EMIand optimized pulse-load response.
•3 year warranty•Power factor corrected•Convection cooling•EMI EN 5502 Level B•Universal Input 85V ~ 264V•Output fully floating•Meets UL 1950, CSA C22.2, and VDE EN60950•Overcurrent/overvoltage protection
Price Each
1 5 10618-FHD XX SX 100W 1.89 7.52 3.66 205.42 192.59 186.17618-FHE XX SX 150W 2.56 8.15 3.66 267.50 250.79 242.43618-FHF XX SX 300W 4.72 6.69 3.66 459.66 430.94 416.57618-FHP XX SX 450W 4.72 7.48 3.66 554.19 519.56 502.24618-FHG XX SX 600W 5.12 7.87 3.66 674.96 632.78 611.68618-FHH XX SX 1000W 6.42 9.84 3.66 871.07 816.63 789.41
PowerLW
Dimensions (In.)
HMOUSER
STOCK NO.
For quantities greater than listed, call for quote.
FH SERIES AC Input Single OutputThis series of switching power supplies has it all in one: power factorcorrection, low line distortion, universal input, and UL 1950, CSA 234, andVDE/EN 60950 approvals.
•3 year warranty•Power factor corrected•Universal input: 85-264 VAC•Immunity against surge and burst•EMI/RFI complies to VDE 0871/B,
EN 55022/B, FCC/B•UL, CSA, and VDE approvals
Available in up to nine output voltagesReplace the XX in the part number with:
3.3 for 3.3V 24 for 24V05 for 5V 30 for 30V06 for 6V 36 for 36V12 for 12V 48 for 48V15 for 15V
*
†
†
*Price Each
1 5 10618-WRM XX SXU 15W 3.82 3.88 1.32 60.54 56.76 54.87618-WRT XX SXU 30W 3.82 4.88 1.44 76.86 72.06 69.66618-WRB XX SXU 50W 3.82 6.26 1.56 104.77 98.22 94.95618-WRC XX SXU 75W 1.50 6.91 3.70 140.03 131.28 126.90618-WRD XX SXU 100W 3.66 7.52 1.89 187.52 175.80 169.94618-WRE XX SXU 150W 2.56 8.15 3.66 246.64 231.23 223.52618-WRF XX SXU 300W 4.72 6.69 3.66 406.51 381.11 368.40618-WRP XX SXU 450W 4.72 7.48 3.66 491.92 461.18 445.80618-WRG XX SXU 600W 6.69 7.87 3.66 734.46 688.56 665.61
PowerLW
Dimensions (In.)
HMOUSER
STOCK NO.
For quantities greater than listed, call for quote.
WR SERIES AC Input Single and Multiple OutputUniversal or auto-ranging inputs for worldwide use. Output power from 15 to 600 Watts.
•Universal Input 85 ~ 264 VAC•High efficiency & reliability•Compact size•Output voltage adjustable•Over voltage protection•EMI meets EN 55022/B, FCC/B•Approved UL1950, EN60950, CSA234
Available in up to eight output voltagesReplace the XX in the part number with:
05 for 5V 24 for 24V06 for 6V 30 for 30V12 for 12V 36 for 36V15 for 15V 48 for 48V
Not available in 6V, 30V, or 36V output
Price Each
1 5 10618-WRM XX FWX 15W 1.32 3.88 3.82 62.91 58.98 57.01618-WRA XX FWX 25W 1.30 4.59 3.82 76.86 72.06 69.66618-WRT XX FWX 30W 1.44 4.88 3.82 84.50 79.22 76.57618-WRB XX FWX 50W 1.56 6.26 3.82 114.77 107.60 104.01618-WRBJ XX FWX 65W 1.67 6.85 3.82 160.03 150.03 145.03618-WRCJ XX FWX 80W 1.65 8.19 3.86 204.26 191.49 185.11618-WRDJ XX FWX 110W 1.89 8.74 3.86 242.16 227.03 219.46
PowerLW
Dimensions (In.)
HMOUSER
STOCK NO.
For quantities greater than listed, call for quote.
Available in four dual output modelsReplace the XX in the part number with
21 for 5V and 24V 23 for 15V and 15V22 for 12V and 12V 24 for 5V and 12V
Single Output
2 Channel Output
Price Each
1 5 10618-WRM XX X 15W 1.32 3.88 3.82 65.54 61.44 59.39618-WRA XX X 25W 1.30 4.59 3.82 79.49 74.52 72.04618-WRT XX X 30W 1.44 4.88 3.82 85.81 80.45 77.76618-WRB XX X 50W 1.56 6.26 3.82 119.76 112.28 108.53618-WRCJ XX X 80W 1.65 8.19 3.86 211.89 198.65 192.02618-WRDJ XX X 110W 1.89 8.74 3.86 248.22 232.71 224.95
PowerLW
Dimensions (In.)
HMOUSER
STOCK NO.
For quantities greater than listed, call for quote.
Available in up to four triple output modelsReplace the XX in the part number with:
01 for 5V, +/- 12V 04 for 5V, +/- 15V03 for +/- 5V, 12V 06 for 5V, 24V, 12V (available with -WRCJ and -WRDJ models only)
3 Channel Output
***
**
†
†
FHD Series available only in 5V, 12V, 15V, 24V, and 48V output.FHE Series not available in 6V, 30V, or 36V output.
ETA-USA Switching Power Supplies and DC-DC Converters
Price Each
1 5 10618-ERS XX SA 10W 2.91 2.68 1.06 38.05 35.67 34.48618-ERM XX SA 15W 3.82 3.88 1.22 47.63 44.66 43.17618-ERA XX SA 25W 3.82 4.59 1.22 56.94 53.39 51.61618-ERB XX SA 50W 3.82 6.26 1.46 76.66 71.87 69.47618-ERD XX SA 100W 1.97 6.50 3.66 118.53 111.12 107.42618-ERE XX SA 150W 2.56 6.97 3.62 154.13 144.50 139.68
PowerLW
Dimensions (In.)
HMOUSER
STOCK NO.
For quantities greater than listed, call for quote.
SWITCHING POWER SUPPLIES
ER Series is a low cost, high efficiency series of switching power supplies.Available from 10 to 150 Watt output.
•3 year warranty•Overvoltage Protection•UL 1950-D3 approved•Universal Input 85V ~ 132V•High effieiency•EMI complies to FCC/A, FCC/B,
for ERD and ERE series
Available in five output voltagesReplace the XX in the part number with:
05 for 5V 24 for 24V12 for 12V 48 for 48V15 for 15V
ER Series AC Input Single Output
Price Each
1 5 10618-PLD XX SZ 120W 1.97 6.10 3.50 123.09 115.40 111.55618-PLE XX HSZ 240W 2.56 7.66 3.86 191.31 179.36 173.38618-PLEY XX HSZU 240W 2.56 9.72 4.33 229.98 215.61 208.42
PowerLW
Dimensions (In.)
HMOUSER
STOCK NO.
For quantities greater than listed, call for quote.
This series of 120W and 240W supplies is built with state-of-the-artinternal controllers which provide compact size and high reliability ata reasonable cost. They are especially useful for motor drive systemswhere high peak handling capability is necessary for externded periods.
•3 year warranty•Input selectable (100V or 200V)•Designed for peak loads (up to150%)•PLEY series safety approved according to
VDE, UL, CSA. CE-marked per LVD•EMI: PLEY series complies to VDE0871/A,
PLD & PLE to FCC/A
Available in three output voltagesReplace the XX in the part number with:
For quantities greater than listed, call for quote.
•Wide operating temperature range•Small input current at no load•Fixed switching frequency 170 kHz•Over current protection•Wide range input•3 year warranty•Output trimming, high efficiency•Isolation voltage: 500V min.•Cross to Cosel ZS & ZW Series
OB Series DC Input Single Output
Replace XX and YY with the desiredoutput and input voltage values
Available in four output voltages (XX):
5V XX = 0512V XX = 1215V XX = 1524V XX = 24
Output XX Code
Available in up to five input voltages (YY):
These input values are not availablewith -OBS series.
OE Series is designed for distributed power, and is suitable for PCBMounting. The open board design results in lighter weight, lower cost,and smaller size.
Specifications:• AC input: 100/120/220/230-240VAC, +10%-13%, 47 to 63Hz• Line regulation: ±0.05% for a +10% line change• Load regulation: ±0.05% for a 50% load change• Output ripple: 5.0mV max. peak-to-peak on 5-28V units,
0.02% max. peak-to-peak on 48-155V units, 0.05% max. peak-to-peak on 200-250V units
Specifications:• AC input: 108/120/132/216/240/264VAC, 47 to 63Hz• Output ripple: 3%RMS @ full rated load, 4% on 12 volt model• Efficiency @ full load: 80% typical• UL recognized for USA and Canada, file no. 133338• CE & TUV
Output#1
597-A5-1.2/P A 5V @ 1.2A 28.28 27.30597-A5-1.5/P B 5V @ 1.5A 29.80 28.77597-B5-3/P B 5V @ 3A 34.50 32.77597-C5-6/P C 5V @ 6A 57.50 54.62597-N5-9/P N 5V @ 9A 78.50 74.59597-D5-12/P D 5V @ 12A 88.77 84.78597-E5-18/P E 5V @ 18A 125.95 119.65597-F5-25/P F 5V @ 25A 184.51 178.97597-B12-1.7 B 12V @ 1.7A 34.50 32.77597-C12-3.4 C 12V @ 3.4A 52.50 49.87597-N12-5.1 N 12V @ 5.1A 73.50 69.82597-D12-6.8 D 12V @ 6.8A 83.95 79.95597-E12-10.2 E 12V @ 10.2A 115.50 109.73597-A15-0.5 A 12V-15V @ 0.5A 28.28 27.30597-A15-0.9 B 12V-15V @ 0.9A 29.70 28.67597-B15-1.5 B 15V @ 1.5A 34.50 32.77597-C15-3.0 C 15V @ 3A 52.50 49.87597-N15-4.5 N 15V @ 4.5A 73.50 69.82597-D15-6.0 D 15V @ 6A 83.95 79.75597-E15-9.0 E 15V @ 9A 115.50 109.73597-F15-15 F 12V@16A or 184.51 178.97
[email protected] B 24V @ 0.5A 29.70 28.67597-B24-1.2 B 24V @ 1.2A 34.50 32.77597-C24-2.4 C 24V @ 2.4A 52.50 49.87597-N24-3.6 N 24V @ 3.6A 73.50 69.82597-D24-4.8 D 24V @ 4.8A 83.95 79.75597-E24-7.2 E 24V @ 7.2A 114.90 109.72597-F24-12 F 24V@12A or 184.51 178.97
[email protected] B 28V @ 1.0A 34.50 32.77597-C28-2.0 C 28V @ 2.0A 52.50 49.87597-N28-3.0 N 28V @ 3.0A 73.50 69.82597-D28-4.0 D 28V @ 4.0A 83.95 79.75597-E28-6.0 E 28V @ 6.0A 115.50 109.73597-B48-0.5 B 48V @ 0.5A 36.50 34.68597-C48-1.0 C 48V @ 1.0A 57.50 54.62597-D48-3.0 D 48V @ 3.0A 88.77 84.78597-E48-4.0 E 48V @ 4.0A 125.95 119.65597-B155-0.12 B 135-170V @ .12A 41.95 39.85597-B200-0.12 B 175-210V @ .12A 41.95 39.85597-B250-0.1 B 215-265V @ .1A 41.95 39.85
Price EachCase Style 1 10
Output
597-AA512 AA 5V @ 2A 12-15V @ 0.5A 52.50 49.88597-BB512 BB 5V @ 3A 12-15V @ 1.5A 62.95 59.80597-CC512 CC 5V @ 6A 12-15V @ 2.5A 99.50 94.53597-AD12-0.4 B 12V @ 0.4A -12V @ 0.4A 38.75 36.81597-AD15-0.4 B 15V @ 0.4A -15V @ 0.4A 38.75 36.80597-AA15-0.8 AA 12V @ 1A or 15V @ 0.8A -12V @ 1A or -15V @ 0.8A 45.00 42.75597-BB15-1.5 BB 12V @ 1.7A or 15V @ 1.5A -12V @ 1.7A or -15V @ 1.5A 57.50 54.62597-CC15-3.0 CC 12V @ 3.4A or 15V @ 3.0A -12V @ 3.4A or -15V @ 3.0A 91.91 87.87597-DD15-5 E 12-15V @ 5A -12-15V @ 5A 136.50 129.68597-AA24-0.6 AA 18-20V @ 0.4A or 24V @ 0.6A -18-20V @ 0.4A or -24V @ 0.6A 45.00 42.75597-BB24-1.2 BB 18-20V @ 0.9A or 24V @ 1.2A -18-20V @ 0.9A or -24V @ 0.6A 57.50 54.63597-CC24-2.4 CC 18-20V @ 1.8A or 24V @ 2.4A -18-20V @ 1.8A or -24V @ 2.4A 92.50 87.88
Price EachCase Style 1 10#1 #2
Price Each
1 10
Output
597-TAA-16W AA 5V @ 2A 12 to 15V @ 0.4A -12 to -15V @ 0.4A or -5V @ 0.4A 57.75 54.86597-BAA-40W BAA 5V @ 3A 12V @ 1A or 15V @ 0.8A -12V @ 1A or -15V @ 0.8A or -5V @ 0.4A 79.25 75.76597-BCC512 CC 5V @ 3A 12V @ 3.4A or 15V @ 3A -12V @ 3.4A or -15V @ 3A 122.25 119.70597-BCC524 CC 5V @ 3A 18-20V @ 1.8A or 24V @ 2.4A -18-20V @ 1.8A or -24V @ 2.4A 123.98 119.70597-CAA-60W D 5V @ 6A 12 to 15V @ 1A -12 to -15V @ 1A or -5V @ 0.4A 94.50 89.77597-CBB-75W CBB 5V @ 6A 12V @ 1.7A or 15V @ 1.5A -12V @ 1.7A or -15V @ 1.5A or -5V @ 0.7A 104.95 99.70597-CP131 131 5V @ 8A 12V @ 1.7A or 15V @ 1.5A -12V @ 1.7A or -15V @ 1.5A or -5V @ 0.7A 125.95 119.65597-DBB-105W DBB 5V @ 12A 12V @ 1.7A or 15V @ 1.5A -12V @ 1.7A or -15V @ 1.5A or -5V @ 0.7A 141.50 134.43597-DCC-150W DCC 5V @ 12A 12V @ 3.4A or 15V @ 3A -12V @ 3.4A or -15V @ 3A 162.50 154.38
1 10No Load Half Load Full Load Amps Full LoadMOUSER
STOCK NO.
Features:• UL, CUL, TUV, CE safety approved• Over voltage protection on 5V outputs (set @ 6.2±0.4V)• All chassis are pre-drilled to accommodate 597-P12
and 597-P24 over voltage protection modules• Two year warranty
The IP500U series unregulated powersupply line is designed for high currentapplications at low cost when fullregulation is not required. This rugged,highly reliable power supply line is idealfor applications such as poweringsolenoids, relays, DC motors, lamps,and DC-DC converters.
•AC input voltage: 90-260VAC•AC frequency: 47-63Hz•Efficiency: 70% typical at full load
•Length: 5.0"•Width: 3.0"•Height: 1.58"
These high efficiency universal input switching power supplies have UL, CSA, and VDE agency approvals.They carry a 1 year warranty and feature 100% burn-in for 24 hours. All power supply inputs are protected byan internal fuse. For outputs other than those listed, call (800) 346-6873 for a quote.
PSA-60W SERIES
•Overcurrent protection: all outputs equipped with automatic recovery current limiting circuit•Overvoltage protection: 5.6V to 6.5V on main output•EMI requirements: meets conduction limits of FCC class B rules, VDE 0871 class B, and VGF 243/1991
For quantities greater than listed, call for quote.
•AC input voltage: 90VAC-264VAC•AC frequency: 47 to 63Hz•Efficiency: 70% typical @ full load•Includes seperate fan connector•Combined output not to exceed total power rating
10W INTERCHANGEABLE PLUG SERIES•Double insulated•Class B EMI•Field changeable AC plugs (sold separately)•Power on LED•For use in portable equipment, peripherals,
wireless communications, and networking•AC input voltage: 90 to 264 VAC•AC input frequency: 47 to 63Hz•Efficiency: 65% min.•DC output cord/connector:
Protolab 4.0 is a low-cost circuit design and simulation package completelyredesigned for use with Microsoft Windows®95. Create and edit circuitsinstantly on your PC while choosing from a complete list of active andpassive components including transistors, diodes, voltage, and signal sources, or select from a long list of pre-designed circuits or additions to your designs. When finished, analyze the circuit with the built-in oscilloscope, voltmeter, ammeter, ohmmeter or wattmeter.MOUSER
gives superior accuracy• Push-to-measure function with
auto power-down• Large 8-digit display with full
range of indicators• Three year warranty
510-1302 $595.00
2003 FUNCTION GENERATOR
510-2003 $525.00
• Fully synthesized• DC to 1.6 MHz• Trigger, sweep, burst, hop,
gate, and continuous modes• Internal linear/log sweep
across frequency range
MODEL 1302B DC POWER SUPPLY 1301A & 1310 DC POWER SUPPLY
510-1301A $249.95510-1310 $174.00
The 510-1302A features three completely isolated voltage supplies: a fixed/variable 5 VDC, 5.0A output, two variable 0-30 VDC, 2.0Aoutputs are available via front panel, and color-coded binding posts. The separate front panel 3 inch LEDdisplays allow you to monitor voltage from 0-30V and current from 0-2A.
• Three Year Warranty
• Triple outputs: 1301A-one +5VDC @ 1.0A and two variable 1.5-1.8VDC#8.5A (anolog); 1301-one 5VDC @ 1.0A and two
varible 1.3-2.0VDC @ 0.25A (digital)• Isolated, independant supplies • Sales and parallel operation • Short circuit protected
• Independent settings of pulse width and pulse spacing
• Outputs from 0.5Hz to 5MHz• Complement output-inverts
waveform• Variable output for CMOS circuitry• Symmetrical square wave outputs
• Four modes-run, triggered, gated, one-shot
• Power required: 105-135AC, 57-63Hz, 6VA maximum
• Sizes (H x W x D): 3" x 10" x 7", weight: 2.2 lbs.
• Three year warranty
1332A POWER SUPPLY 1504 & 1505 AC POWER SUPPLIES
510-1504 $425.00510-1505 $610.00
• 0-32V; 0-5A continuously variable with coarse and fine controls
• Short circuit protected• Two digital readouts:
monitor current or voltage• Constant voltage or constant
current mode with green & redLED indicators
• Heavy duty transformerisolated design
• Model 1504 Single Range: 0-150VAC @ 4A• Model 1505 Dual Range: 0-150VAC @ 4A, 0-260VAC @ 2A• Triple isolated continuously variable AC output• Power line leakage current measurement facility• 3-digit DPM for high accuracy• Capacitive coupling less
than 0.0005pF• Galvanic leakage
less than 10µA• 120dB attenuation for
common mode noise• Three year warranty
POWERED PROTO-BOARDS™ Unlimited Lifetime Guarantee on all Global Breadboard Sockets.
Microprocessor controls deliver a purely stable and accurate output withfrequency stability of 0.1% and total harmonic distortion is less that 1%.Each unit comes with a standard RS-232 interface, as well as a 40MHzexternal frequency counter.
Description Price EachMOUSERSTOCK NO.
2001A ECONOMICAL FUNCTION GENERATOR
510-2001A $185.00
• Exceptionally low sine wave distortion • Sine, square, triangle plus TTI outputs • <1% THD or <1% sine wave distortion• 1Hz to 0.2MHz• Variable DC offset• Sweepable 100:1 with ±10V input• High and low level variable 50 and 600 ohm outputs
3100 HAND-HELD CAPACITANCE METER
510-3100 $119.00
• 4 didgit dual LCD display • Automatic auto ranging, 500pf to 50mf • 10 special function modes• Automatic shut off• Three year warranty
510-PB-10• 840 tie points• 3 binding posts• Plastic backplate
7x4x1.4 inches(LxWxH)
• 8 14pin DIP cap
PB-203A:• 5VDC, 1A power supply• Separate +5.5-18VDC/-5.5-18VDC power supplies-capable of 500mA @ 15VDC• Factory pre-set power to +/-15VDC• Voltages independently adjustable• Twenty four 14 pin DIP capacity
PB-204:• 5VDC, 1A power supply• Separate +12/-12VDC power
supplies-capable of 250mA• Powered from external pak
twenty four 14 pin DIP capacity
• 2MHz multi-purpose sweep generator with internal 6-digit frequency counter
• Wide frequency range 0.2Hz to 2MHz• Provides sine, triangle, square
wave, and ramp outputs• Continuously variable
50Ω output• Variable DC offset• Symmetry control • Separate TTL output
provides duty-cycleadjustment
• Sweep input allows VCO control of frequency
• Model 2002 available without digital display
• Three year warranty
PB-503:• 1 to 100KHz function generator and TTL outputs• Voltage: 5V and variable ±5-15VDC power supplies• 2520 tie-points• 8 logic probe circuits, LED indicators, pulsers, potentiometers and speaker• Bench-top workstation
PB-503C:• Identical to PB-503
in portable design workstation• Housed in a rugged carrying case
510-PB-10
• External trigger and gate• TS232 communications port• Three year warranty
Unlimited Lifetime Guarantee on all Global Breadboard Sockets.
and reverse polarity• Thermostatically controlled cooling fan• 1 year warranty
High Current
615-1760 $650.00
615-1651A $435.00
Features:• Two 0-30VDC, 2A sections capable of
independent, series or parallel operation• One 4-6.5VDC, 5A section• Switchable series/parallel operation 30V sections• Adjustable current limit controls 30V sections• Two 3 digit LED displays - one reads volts or
amps of "B" supply - one reads volts or amps of"A" supply or 4V-6.5V supply
• Unique variable tracking, B track A at 5% to 100%
Triple Output
• Two 0-24VDC outputs (0.5A)• One fixed 5V output (4A)• Independent or tracking operation• Adjustable current limiting• Designed to operate continuously at rated output• Overload protection: short circuit, overvoltage,
and reverse polarity• Connect outputs in series for higher voltage output
or in parallel for higher current output (switchselectable)
• 1 year warranty
615-1670 $199.00
• Output voltage: 0-30V @ 2.5A;12V and 5V @ 0.5A
• Overload protection
Compact Triple Output
Features:• Output voltage: 0-30V• Output current: 0-1A• Constant voltage/constant current operation• 2 analog• 2 year warranty
615-1710 $235.00
Features:• Output voltage: 0-60V• Output current: 0-2A• Constant voltage/constant current operation• 2 analog• 2 year warranty
615-1711 $315.00
Features:• Output voltage: 0-30V• Output current: 0-3A• Constant voltage/constant current operation• 2 analog• Operate continuously at full load without
overheating• Coarse and fine voltage controls• 2 year warranty
615-1730 $319.00
FUNCTION GENERATORS
615-4040A $545.00
20 MHz Sweep Function Generatorwith Frequency Counter
B&K-PRECISION offers a full-range of functiongenerators so you can choose the generator bestsuited to your own activities or applications. The lineconsists of a variety of high performance generatorsincluding function, sweep/function, RF, and audio.All are rugged lab-grade instruments capable ofsatisfying a variety of engineering, testing, andservice situations. Each has been engineered forhigh-reliability and user operating convenience.
B&K-PRECISION power supplies provide theversatility and reliability required for a broad spectrumof laboratory and service applications. They are idealfor use in engineering, industrial service shop, lab,and school applications. Each power supply is builtfor continued stability and accuracy over a wide rangeof operating conditions.
615-4010A $250.00
Features:
• 0.2Hz-2MHz in 7 ranges
• Sine, square, triangle, pulse,
and ramp output
• Variable duty cycle
• Variable DC offset
2MHz Function Generator
3MHz Sweep Function Generators
615-4001 $189.00615-4003 $225.00
Features:
• Generates sine, triangle, & sine waveforms
• 0.5Hz to 3MHz
• 20Vp-p output into open circuit
(10Vp-p into 50 Ω)
• TTL output <25nS (model 615-4003)
• TTL output <30nS (model 615-4001)
• Voltage control generator (VCG) input
• 100% DC offset
• 5 digit display (model 615-4003)
• Variable ampllitude output plus 20dB attenuator
5MHz Function Generatorwith Digital Display
Features:
• 0.5Hz-5MHz
• Sine, square, triangle, pulse, and ramp output
• Coarse and fine tuning
• 4 digit LED display
• Variable duty cycle
• Variable DC offset
615-4011A $315.00
10MHz Sweep/FunctionGenerator with Digital Display
Features:
• 0.1Hz-10MHz
• Linear and log sweep
• 5 digit LED display
• All features of Model 4011A
615-4017A $399.00
DC POWER SUPPLIES
Triple Output Analog615-1651A
615-4011A
615-4003
Single Output615-1620
Features:
• 0.2 Hz to 20 MHz
• AM & FM modulation
• Burst operation
• External frequency counter
to 30 MHz
• 5 digit LED display
• All features of model 615-4017A
High Current615-1686
Triple Output Digital615-1760
LED Readout615-1735
Features:• Output voltage: 0-30V• Output current: 0-3A• Constant voltage/constant current operation• Analog• Fully overload protected• 1 year warranty
615-1626 $220.00
Features:• Output voltage: 0-30V• Output current: 0-3A• Constant voltage/constant current operation• 3-digit LED• Fully overload protected• 1 year warranty
615-1627 $239.00
Features:• Output voltage: 0-30VDC• Output current: 0-3A• Constant voltage/constant current operation• 3-digit LED• Operate continuously at full load without
overheating• 2 year warranty
615-1735 $389.00
Features:• Output voltage: 0-18V• Output current: 0-5A• Constant voltage/constant current operation• Continuously monitor voltage and current output
#10 16-22 red flanged spade, 1/4" 16-22 red nylon male coupler, 1/4" 16-22 red nylon female coupler, 1/4" 14-16 blue nylon female flag disconnect, 1/4" 14-16 blue male disconnect, 1/4" 14-16 blue female disconnect, .156" 16-22 red female bullet, .156" 16-22 red male bullet, 16-22 red butt connector, 14-16 blue butt connector#6 16-22 red ring, #8 14-16 blue ring, #10 16-22 red ring, #6 16-22 red spade, #8 14-16 bluespade, #10 16-22 red spade, #6 16-22 red flanged spade, #8 14-16 blue flanged spade, #10 16-22 redflanged spade, 1/4" 16-22 red nylon male coupler, 1/4" 16-22 red nylon female coupler, 1/4" 14-16 bluenylon female flag disconnect, 1/4" 14-16 blue male disconnect, 1/4" 14-16 blue female disconnect, .156"16-22 red female bullet, .156" 16-22 red male bullet, 16-22 red butt connector, 14-16 blue butt connectors
370-159-2 232 Solderless connectors - - - - - 180 18 types of connectors and disconnects, non-insulated 14.95Varistors / Thermistors370-MOV-1 236 Metal oxide varistor kit 48V-510V 25 3 each: VZA series: 48, 130, and 150; VZC series: 130 and 150; 2 each: VZC series: 250; 32.95
561-M1996 455 Eagle Cable clamps, nylon - - - - - 300 3 each: 1 1/4" x 1/2", 1 1/2" x 1/2"; 5 each: 1" x 1/2"; 10each: 1/2" x 1/2", 9/16" x 1/2", 5/8" x 1/2", 48.063/4" x 1/2"; 15 each: 5/16" x 1/2", 3/8" x 1/2", 7/16" x 1/2"; 20 each: 5/16" x 3/8", 3/8" x 3/8",7/16" x 3/8", 1/2" x 3/8"; 25 each: 3/16" x 1/2", 1/4" x 1/2", 1/4" x 3/8"; 40 each: 1/8" x 1/8"
561-M1997 455 Eagle Flat washers, nylon - - - - - 510 20 each: 1/2"; 40 each: 3/8"; 50 each: #2; 60 each: #4, #6, #8, #10, 1/4"; 100 each: 9/16" to 3/4" 29.18561-M1998 455 Eagle Screws and - - - - - 755 100 each: 440 x 1/4" to 1" long assorted headstyles; 623 x 1/4" to 5/8" long assorted headstyles; 48.06
nuts, nylon 832 x 1/4" to 3/4" long assorted headstyles; 1032 x 1/4" to 1/2" long assorted headstyles; 440, 632, 832,1032, 1/4-20 socket set screws; 440, 632, 832, 1032, 1/4-20 hex nuts; 30 each: 1/4-20 x 1/4" to 3/4" longround and fillister head; 125 each: #4, #6, #8, #10, 1/4 flat washers