Induction and Training Programme / Chart Detail / issue 1 ... and Training Programme / Chartwork-Latitude / issue 1 Further Information - Reference Book 2 LONGITUDE Without moving

Induction and Training Programme / Chart Detail / issue 1 Further Information - Reference Book 7

Induction and Training Programme / Local Buoys / issue 1 Further Information - Reference Book 8

LATITUDE

To find the Latitude, using the parallel rulers, we must first make sure they arehorizontal to the chart.

In this case the bottom edge can be lined up with the 52° 55’ line going across the chart.

Holding the top section of the rulers the bottom edge is now moved down until itreaches the plot.

The Latitude minutes can be read from the scale. The full reading is now 52° 54’ NInduction and Training Programme / Chartwork-Latitude / issue 1 Further Information - Reference Book 2

LONGITUDE

Without moving the rulers, the dividers are now placed against these with one point on theparallel line of 1° 30’. The other point is opened to the plot position.

The dividers are now moved along the line to the bottom (or top) of the chart and theLongitude minutes read.

The reading is 32.5 minutes. The full Longitude is therefore 001° 32.5’ EThe 0930 plot on a Bearing of 070° and distance of 4’ is now converted to

52° 54’ N 001° 32.5’ EInduction and Training Programme / Chartwork-Longitude / issue 1 Further Information - Reference Book 2