model 8780 Indoor Emergency Water Tempering Skid FEATURES & BENEFITS QUALITY CONTROL Fully assembled and tested for quick placement and hook-up. BLENDING SYSTEM Safe, fully engineered thermostatic mixing valve for mixing large volumes of hot and cold water guarded with anti-scald protection and full flow cold water bypass to provide tempered water in adverse situations. TANK SYSTEM OPTIONS Tanks available: 119 Gal non-ASME (450 L), 120 Gal (454 L) ASME, or 200 Gal (757 L) ASME that will Store enough hot water to provide a single 15 minute shower and eye/face wash use. Also available in ASME is a 318 Gal (1203 L) or 400 Gal (1514 L) that stores enough hot water to provide two 15 minute shower and eye/face wash uses before tank recovery is required. STEAM SYSTEMS Steam Heat Exchanger (Option No. 24): Feed forward instantaneous heat exchanger. Requires 15 PSIG, max. 1300 lb./hr. steam supply. EXPANDABLE/FLEXIBLE CAPABILITIES System can be designed to a number of variations including the hot water supply, the electrical type, and the blending capabilities. ELECTRICAL SYSTEM OPTIONS Haws provides systems at various voltage options, including 480V 3ph, 600V 3ph, 208V 1ph, 208V 3ph, 240V 1ph, and 240V 3ph. Electrical area rating options include Ordinary Location and Hazardous Location up to CL1 DIV 2 B, C, D T3. PERFORMANCE SERIES Offering a standardized line of water tempering solutions providing shorter lead times, advanced compliance, cost efficiencies, and customizable configuration options. MONITORING Advanced Programmable Monitoring Control System provides real-time digital display with alarm cycle history and fault history. Capabilities include automatic alarm silencing reset, customer control room synchronization, seasonal operation scheduling, and more. OPTIONS For more information, visit www.hawsco.com or call (888) 640-4297. SPECIFICATIONS Model 8780 skid-mounted tempering system shall include a membrane encapsulated, fiberglass channel reinforced 5' x 5' (1.5 x 1.5 m) wooden structure with bright yellow elastomeric chemically resistant waterproof coating, and protected with UV inhibitors. This single or multiple shower and/or eyewash feeder provides an operating temperature range of 40° to 100° F (4° to 37° C), and is designed to operate with a number of tempering and electrical options. The tempered water blending system includes an integral hot water supply, whether stored or supplied by steam, and will incorporate fail-safe features like anti-scald protection and full flow cold water bypass. The electrical system can be easily adapted to voltages upon request. APPLICATIONS Perfect for indoor facilities that may encounter dangerous chemical hazards and need a complete tempering system, and/or need a feeder to other remote booth substations or other drench systems and/or eyewash stations. 1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [email protected] :: www.hawsco.com :: 22 July, 2020 DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.
9
Embed
Indoor Emergency Water Tempering Skid · 2020. 7. 27. · Indoor Emergency Water Tempering Skid FEATURES ... Safe, fully engineered thermostatic mixing valve for mixing large volumes
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
model 8780
Indoor Emergency Water Tempering Skid
FEATURES & BENEFITS
QUALITY CONTROLFully assembled and tested for quick placement andhook-up.
BLENDING SYSTEMSafe, fully engineered thermostatic mixing valve for mixinglarge volumes of hot and cold water guarded withanti-scald protection and full flow cold water bypass toprovide tempered water in adverse situations.
TANK SYSTEM OPTIONSTanks available: 119 Gal non-ASME (450 L), 120 Gal (454 L)ASME, or 200 Gal (757 L) ASME that will Store enough hotwater to provide a single 15 minute shower and eye/facewash use. Also available in ASME is a 318 Gal (1203 L) or400 Gal (1514 L) that stores enough hot water to providetwo 15 minute shower and eye/face wash uses before tankrecovery is required.
EXPANDABLE/FLEXIBLE CAPABILITIESSystem can be designed to a number of variationsincluding the hot water supply, the electrical type, and theblending capabilities.
ELECTRICAL SYSTEM OPTIONSHaws provides systems at various voltage options, including480V 3ph, 600V 3ph, 208V 1ph, 208V 3ph, 240V 1ph, and240V 3ph. Electrical area rating options include OrdinaryLocation and Hazardous Location up to CL1 DIV 2 B, C, DT3.
PERFORMANCE SERIESOffering a standardized line of water tempering solutionsproviding shorter lead times, advanced compliance, costefficiencies, and customizable configuration options.
MONITORINGAdvanced Programmable Monitoring Control Systemprovides real-time digital display with alarm cycle historyand fault history. Capabilities include automatic alarmsilencing reset, customer control room synchronization,seasonal operation scheduling, and more.
OPTIONS
For more information, visit www.hawsco.com or call (888)640-4297.
SPECIFICATIONS
Model 8780 skid-mounted tempering system shall include amembrane encapsulated, fiberglass channel reinforced 5' x 5'(1.5 x 1.5 m) wooden structure with bright yellow elastomericchemically resistant waterproof coating, and protected withUV inhibitors. This single or multiple shower and/or eyewashfeeder provides an operating temperature range of 40° to100° F (4° to 37° C), and is designed to operate with anumber of tempering and electrical options. The temperedwater blending system includes an integral hot water supply,whether stored or supplied by steam, and will incorporatefail-safe features like anti-scald protection and full flow coldwater bypass. The electrical system can be easily adapted tovoltages upon request.
APPLICATIONS
Perfect for indoor facilities that may encounter dangerouschemical hazards and need a complete tempering system,and/or need a feeder to other remote booth substations orother drench systems and/or eyewash stations.
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [email protected] :: www.hawsco.com :: 22 July, 2020DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.
CONCEPTUAL FORMS CANNOT BE DISCLOSED, REPRODUCED OR USED
THE ATTACHED DESIGNS ARE CONSIDERED TRADE SECRETS AND POTENTIALLY PATENTABLE. IN ACCORDANCE WITH CONFIDENTIALITY AND
NON-DISCLOSURE AGREEMENT, THESE DESIGNS IN ACTUAL OR
WITHOUT HAWS' EXPRESS WRITTEN CONSENT.
REVISIONS
REV DESCRIPTION ECN DATE BY
1 INITIAL RELEASE H0105 12/30/2015 MENOTES:1. DIMENSIONS IN US INCHES.2. ALL TOLERANCES: 1/2"3. AREA CLASSIFICATION: UNCLASSIFIED4. MATERIAL:
INFORMATION CONTAINED HEREIN IS THE SOLE PROPERTY OF HAWS CORPORATION AND THIS
DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT TO BE REPRODUCED, USED, OR
SH 1
GW
REVISIONS
REV DESCRIPTION ECN DATE BY
1 INITIAL RELEASE H0110 12/31/2015 MENOTES:1. DIMENSIONS IN US INCHES.2. ALL TOLERANCES: 1/2"3. AREA CLASSIFICATION: CL1 DIV2 GROUP B,C,&D T2D4. MATERIAL:
INFORMATION CONTAINED HEREIN IS THE SOLE PROPERTY OF HAWS CORPORATION AND THIS
DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT TO BE REPRODUCED, USED, OR
SH 1
GW
CONCEPTUAL FORMS CANNOT BE DISCLOSED, REPRODUCED OR USED
THE ATTACHED DESIGNS ARE CONSIDERED TRADE SECRETS AND POTENTIALLY PATENTABLE. IN ACCORDANCE WITH CONFIDENTIALITY AND
NON-DISCLOSURE AGREEMENT, THESE DESIGNS IN ACTUAL OR
WITHOUT HAWS' EXPRESS WRITTEN CONSENT.
91"
BLENDING SYSTEM
1-1/4" NPT TEMPERED WATER OUTLET
JUNCTION BOX
IMMERSION HEATER
SYSTEM DRAIN
ELECTRICAL
DISCONNECT
1-1/2" NPT COLD WATER INLETELECTRICAL
THERMOCOUPLE
75"
7" 5"
VACUUM BREAKER
AIR ELIMINATOR
EXPANSION TANK
TEMPERATURE & PRESSURE RELIEF VALVE
200GAL HOT WATERSTORAGE TANK
4X 7"
65"
60"
60"
4X 1"
REVISIONS
REV DESCRIPTION ECN DATE BY
1 INITIAL RELEASE H0112 12/31/2015 MENOTES:1. DIMENSIONS IN US INCHES.2. ALL TOLERANCES: 1/2"3. AREA CLASSIFICATION: CL1 DIV2 GROUP B,C,&D T2D4. MATERIAL: