PREFACE SUMMARY OF THE PRODUCTS: 1. Various I/O Boards for symmetrical and asymmetrical PDH signal distribution with special interconnection cables to fit all equipment types 2. Cable assemblies for power, traffic or control signals 3. RF accessories: hybrids, adaptors, coaxial cables, OMTs.. etc to further enhance NEC Microwave equipment configuration versatility (1+0, 1+1, 2+0.. system) 4. Measuring tools and systems for test and demonstration purposes Page ii This catalogue introduces the product portfolio offered by Scientis Solutions Ltd. for mainly NEC microwave equipment. These products include base-band connection interfaces, RF accessories and These products include base-band connection interfaces, RF accessories and measuring tools and all of these accessories were developed and manufactured based on specific customer requirements in accordance with the quality standards of NEC Corporation. CATALOGUE April 2010 Indoor Accessories RF Accessories Measuring tools
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
PREFACE
SUMMARY OF THE PRODUCTS:
1. Various I/O Boards for symmetrical and asymmetrical PDH signal distribution with special
interconnection cables to fit all equipment types
2. Cable assemblies for power, traffic or control signals
3. RF accessories: hybrids, adaptors, coaxial cables, OMTs.. etc to further enhance NEC Microwave
4. Measuring tools and systems for test and demonstration purposes
Page ii
This catalogue introduces the product portfolio offered by Scientis Solutions Ltd. for mainly NEC microwave equipment. These products include base-band connection interfaces, RF accessories and These products include base-band connection interfaces, RF accessories and measuring tools and all of these accessories were developed and manufactured based on specific customer requirements in accordance with the quality standards of NEC Corporation.
SSH 11-38 GHZ HYBRIDS FOR 2 ODUs PART NO.: SSH-130-150-2NEC-3(6)(10)-P(U)D(B)R140-A(B)
2.12
Separated Single Polarized Symmetrical (3dB) or Asymmetrical (6 or10dB) Single Band Hybrid for Frequency Range of 11, 13, 15, 18, 23, 26, 28, 32 and 38GHz
• Interface at ODU side: 2xNEC flange
• Interface at antenna side:
- 11GHz: PDR100, UDR100, PBR100 or UBR100 or other customer request
- 11 and 13GHz: PDR120, UDR120, PBR120 or UBR120 or other customer request
- 13 and 15GHz: PDR140, UDR140, PBR140 or UBR140 or other customer request
- 18, 23 and 26GHz: PDR220, UDR220, PBR220 or UBR220 or other customer request
- 26GHz: PDR260, UDR260, PBR260 or UBR260 or other customer request
- 28, 32 and 38GHz: PDR320, UDR320, PBR320 or UBR320 or other customer request
• Material of the waveguide flange: Aluminium(A) or Brass(B)
• Content of the ordering code:
SSH-"frequency band"-2NEC-"coupling rate"- "WG flange type"- material of the WG flange"
• Example code: SSH-110-2NEC-3-PDR100-A
SSH 11-38 GHZ HYBRIDS FOR 2 ODUs PART NO.: SSH-110...380-2NEC-3(6)(10)-P(U)D(B)R100…320-A(B)
2.15
Separated Single Polarized Symmetrical (3dB) or Asymmetrical (6 or10dB) Dual Band Hybrid for Frequency Range of 32-38GHz (31.8-39.5GHz)
• Interface at ODU side: 2xNEC flange
• Interface at antenna side: PDR320, UDR320, PBR320 or UBR320
or other customer request
• Material of the waveguide flange: Aluminium(A) or Brass(B)
B. RF Accessories (IS Series)3. HYBRID FOR 4 ODUs (SINGLE POLARIZATION)
Page 22
3.1
SINGLE POLARIZED HYBRIDS FOR 4 ODUs
SH–4ODU consist of three hybrids
SH–4ODU consist of three hybrids
2?(1+1) System
Hot Standby Operation
(double capacity, very high availability
(4+0) System
Simultaneous Operation
(four-fold capacity)
(3+1) System
Hot Standby Operation
(triple capacity, increased availability)
3.2
Integrated Single Polarized Symmetrical (6dB) Single Band Hybrid for Frequency Range of 13, 15, 18, 23, 26, 28, 32, 38 GHz
• Interfaces at ODU and antenna side: NEC flange• Coupling rate: 6dB (25%), any other coupling rate is available upon
customer request• Content of the ordering code:
ISH-"frequency band"-4NEC-6• Example code: ISH-130-4NEC-6
ISH 13-38 GHZ HYBRIDS FOR 4 ODUs PART NO.: ISH-130…380-4NEC-6
B. RF Accessories (IS Series)3. HYBRID FOR 4 ODUs (SINGLE POLARIZATION)
Page 23
3.3
Separated Single Polarized Symmetrical (6dB) Single Band Hybridfor Frequency Range of 13, 15, 18, 23, 26, 28, 32, 38 GHz
• Interfaces at ODU side: 4xNEC flange• Interface at antenna side:
- 13GHz: PDR120, UDR120, PBR120 or UBR120 or other customer request- 13 and 15GHz: PDR140, UDR140, PBR140 or UBR140 or other customer request- 18, 23 and 26GHz: PDR220, UDR220, PBR220 or UBR220 or other customer request- 26GHz: PDR260, UDR260, PBR260 or UBR260 or other customer request- 28, 32 and 38GHz: PDR320, UDR320, PBR320 or UBR320 or other customer request
• Material of the waveguide flange: Aluminium(A) or Brass(B)• Coupling rate: 6dB (25%), any other coupling rate is available upon customer request• Content of the ordering code:
SSH-"frequency band"-4NEC-6-"WG flange type"-"material of the WG flange"• Example code: SSH-130-4NEC-6-PDR140-B6
SSH 13-38 GHZ HYBRIDS FOR 4 ODUs PART NO.: SSH-130…380-4NEC-6-P(U)D(B)R120…320-A(B)
B. RF Accessories (IS Series)4. HYBRIDS FOR 4 ODUs (DUAL POLARISATION)
Page 24
4.2
4.1
Integrated Dual Polarized Symmetrical (3dB) or Asymmetrical (6 or 10dB)Single Band Hybrid for Frequency Range of 13,18, 38 GHz
• Interfaces at ODU side: NEC flange
• Interfaces at antenna side: interface for dual polarized Andrew(A), Grante(G) or RFS(R)
• Coupling rate: 3, 6 or 10dB at Vertical and Horizontal polarization
• Content of the ordering code:
IDH-"frequency band"-4NEC-"coupling rate for vertical pol. "-"coupling rate for
horizontal pol."-"Antenna manufacturer"
• Example code: IDH-130-4NEC-V6-H3-G
IDH 13, 18 AND 38 GHZ DUAL POLARIZED HYBRIDS FOR 4 ODUs PART NO.: IDH-130/180/380-4NEC-V3(6)(10)-H3(6)(10)-A(G)(R)
DUAL POLARIZED HYBRIDS FOR 4 ODUs
DH–4ODU consist of
one OMT (for polarization separation), and
two hybrids (for equipolar decoupling) 2 x (2+0) Dual Polarized System 2 x (1+1) Dual Polarized System
B. RF Accessories (IS Series)4. HYBRIDS FOR 4 ODUs (DUAL POLARISATION)
Page 25
4.3
IDH 13, 18 AND 38 GHZ DUAL POLARIZED HYBRIDS FOR 4 ODUs
B. RF Accessories (IS Series)5. MOUNTING BRACKET
Page 26
5.2
Mounting brackets (Separate Interface) for NEC ODU with interfaceadapter for the frequency range of 11, 13-15, 18-23, 26, 28, 32-38GHz
• Interface at ODU side: NEC flange• Interface at antenna side:
- 11GHz:PDR100, UDR100, PBR100 or UBR100 or other customer request- 11 and 13GHz: PDR120, UDR120, PBR120 or UBR120 or other customer request- 13 and 15GHz: PDR140, UDR140, PBR140 or UBR140 or other customer request- 18, 23 and 26GHz: PDR220, UDR220, PBR220 or UBR220 or other customer request- 26GHz: PDR260, UDR260, PBR260 or UBR260 or other customer request- 28, 32 and 38GHz: PDR320, UDR320, PBR320 or UBR320 or other customer request
• Material of the waveguide flange: Aluminium(A) or Brass(B)• Content of the ordering code:
SI-"frequency band"-NEC-"WG flange type"-"material of the WG flange"• Example code: SI-110-NEC-PDR120-B, SI-130-150-NEC-PDR140-A
MOUNTING BRACKETS WITH INTERFACE ADAPTER FOR 11-38GHZ ODU
5.1
Mounting bracket (Separate Interface) for NEC ODU (Pasolink V4, NEO) without interface adapter for the frequency range of 6/7/8 GHz
MOUNTING BRACKET WITHOUT INTERFACE ADAPTER FOR 6/7/8GHZ ODU PART NO.: SI-6/7/8-NEC-W/O
B. RF Accessories (IS Series)6. WAVEGUIDE-N TRANSDUCER
Page 27
6.1
Waveguide to N transducer for frequency range of 6/7/8 GHz
• Material of the Waveguide flange: (A)- aluminium or (B)-Brass• N connector: female • Content of the ordering code: "Waveguide type"-N-"Material of the WG flange"• Example code: PDR70-N-B, UDR84-N-A, ….
WG-N TRANSDUCER PART NO.: WG FLANGE-N-A(B)
6.2
WAVEGUIDE-N TRANSDUCER
B. RF Accessories (IS Series)7. LOW LOSS CABLES
Page 28
7.2
LOW LOSS CABLES
7.1
Part No.: LCC-50-NS(M)NS(M)-1.0Coaxial Cable with 2pcs Straight N-male Connectors; 1m
Part No.: LCC-50-NS(M)NS(M)-1.2Coaxial Cable with 2pcs Straight N-male Connectors; 1.2m
Part No.: LCC-50-NS(M)NR(M)-1.0Coaxial Cable with Staright N-male and Right Angle N-male Connector; 1m
Part No.: LCC-50-NS(M)NR(M)-1.2Coaxial Cable with Staright N-male and Right Angle N-male Connector; 1.2m
Part No.:LCC-50-NR(M)NR(M)-1.0Coaxial Cable with 2pcs Right Angle N-male Connectors; 1m
Part No.: LCC-50-NR(M)NR(M)-1.2Coaxial Cable with 2pcs Right Angle N-male Connectors
LOW LOSS CABLES
C. MEASURING TOOLS (IS SERIES)1. MEASURING TOOLS
Page 29
1.1
Interconnection cable set for two ODUs, Frequency Range of 6, 7, 8, 11, 13, 15, 18, 23, 26, 38 GHz (In case of 6/7/8GHz the ODU should has N connector)
• Attenuators - 20 dB with N(SMA)(K)* connectors - 2pcs• Waveguide adapter rings - 2pcs• Waveguide-SMA(K)* converters - 2 pcs, in case of 11-38GHz• N(SMA)(K) – N(SMA)(K)* cable - 1pc• IDU - ODU IF cables with connectors - 2pcs• Screws - 12pcs, in case of 11-38GHz • Content of the ordering code:
- NEC-ICBSET-”frequency range”-LAB-Bundle• Example code: NEC-ICBSET-38G-LAB-Bundle
* N connector is used for 6/7/8GHz (if the ODU has N connector), SMA for 11-26GHz, K for 28-38GHz
INTERCONNECTION RADIOFREQUENCY PART NO.: NEC-ICBSET-59…380-LAB-BUNDLE CABLE SET FOR 2 ODUS
1.3
Measurement frame for XPIC system is developed to testNEC PASOLINK XPIC System
• Frequency range: 13/18/38GHz
• Type of system: Dual polarized Measurement System
• Type of Waveguide: Rectangular
• Total Attenuation: 100 or 120 dB
• Number of interface for NEC ODUs : 4
• Type of connectors: SMA (female) or K (female)
• To check the frequencies of the ODUs there are four pieces SMA (10-26GHz) or
K (28-40GHz) connectors, which should be terminated if they are not used.
MEASURING FRAME FOR XPIC SYSTEM FOR 13(18)(38)GHZ PART NO.: MEASURING FRAME FOR XPIC
1.2
Direct mounted measuring frame for frequency range of 11, 13, 15, 18, 23, 26, 38 GHz, is developed for simulation of point to point microwave links
• The system can be used for the simulation of hot standby system(1+1). In this case two
direct mounted type hybrid should be installed to the place of the ODUs.
• For adjusting the attenuation of the microwave path the curves of the Variable Attenuator
should be used (between 80 and 120dB).
• To check the frequencies of the ODUs there are two pieces SMA (10-26GHz) or
K (28-40GHz) connectors, which should be terminated if they are not used.