Index to Vol. 12 (1972) Transactions of The Iron and Steel Institute of Japan Table of Contents No. 1 Rate of Desulfurization of Carbon-Saturated Iron Melts by a Rotating Cylinder of Calcium Carbide By Hiroshi 001, Yukio OGUCHI, and Hakaru NAKATO Calculation of Internal Stress of Steel Induced during Quenching . . . . . . . . . . . . . . . By Yasutsugu TosHIOKA, Munemitsu FuKAGAWA, and Yoshinori SAIGA The Effects of Carbon Contents and M 8 Temperatures on the Hardness of Martensitic Fe-Ni-C Alloys By Minoru TAN AKA and Chong Sool CHOI Study on Properties of Medium Carbon Chromium Steel . . . . . . . . . . . . . . . . . . . . By Kiyoshi NARIHIRO, Yasuo OTOGURO, Takashi OTSUBO, and Noboru MnoA Temperature and Strain Rate Dependences of Flow Stress in Metals and Alloys in Torsional Deformation By Yuzo OHTAKARA, Tadahisa NAKAMURA, and Seita SAKUI 6 .. . ... . .... 16 .......... 26 ...... 36 Study on Brittle Fracture Surfaces Formed at Low-temperature in Relation to Microstructures of Low Carbon Steels . .. . . 45 By Fukunaga TERASAKI and Hiroo OHTANI Theoretical Analysis of Sintering Operation .. . ..................... 54 By Iwao MucHI andJiiz6 HIGUCHI Study on Flow Rate Control of Molten Metals by Electro-magnetic Pump . ... .. . ......... . . . . . . .. . 64 By Kenji CHIJIIWA, Mitsuo ITo, and Katsuhiko NoRO On the Reduction Degradation of Lime Sinter . . . . . . . . By Minoru SASAKI, Tsuneo ENOKIDO, and Shin-ichi KoNDO .......................... 70 Simulation Experiment on Gas Flow Patterns in a Reheating Furnace . . . . . . . . . . . . . . . . . . . . . . . . . 72** By Syogo MATSUNAGA and Bunsho HIRAOKA Abstracts from Tetsu-to-Hagane, Vol. 57 (1971), No. 14 (December) and Vol. 58 (1972), No . I (January) .......... 79t No. 2 A Study of the Solidification of Heavy Carbon Steel Ingot By Takasuke MoRI and Kiichi NARITA ........................... 83 Freezing Rate and Internal Structure of Heavy Carbon Steel Ingot By Kiichi NARITA and Takasuke MORI Macrostructure of and Segregation in Continuously Cast Carbon Steel Billets By Hisashi MORI, Nobuyoshi TANAKA, Norio SATO, and Masazumi HIRAI Tempering of a High Carbon Marte nsite . . . . . . . . . . . . . . By Y. OHMORI, A . T . DAVENPORT, and R. W. K. HoNE YCOMBE The Microstructure and Toughness of High Tensile Strength Steels By Hiroo OHTANI, Fukunaga TERASAKI, and Tatsuro KUNITAKE Crystallography of Pearlite . . . . . . . . . . . . . . . . . . . . . By Y. OHMORI, A. T. DAVENPORT, and R. W. K. HoNEYCOMBE Rate of Reduction of Silica in Slag by Carbon in Liquid Iron By Yasuji KAWAI, Katsumi MORI, and Mitsushi IcucHI The Mechanical Properties of Low-Carbon Low-Alloy Bainitic Steels By Yasuya OHMORI, Hiroo OHT ANI, and Tatsuro KU NITAKE Production and Technique in the Iron and Steel Industry in Japan during 1971 By Tsuneyo IKr Present Status and Future Prospects of Forged Steel Rolls in Japan . . . . . . . . By Kazuyoshi KOBAYASHI Abstracts from Tetsu-to-Hagane, Vol. 58 (1972), Nos. 2 and 3 (February and March) No. 3 92 . 102 .112 .118 .128 .138 .146 .155** .172** .183t Some Considerations on the Nitrogen Transfer across Ga~-Liquid Iron Interface . . . . . . . . . . . . . . . . . . . . . 189 By Michio INOUYE and Takao CHOH Identification marks suffixed to the page number: Unmarked: Research Articles, Research Note, and Letters to the Editor * ** t Reviews Reports Miscellaneous articles Index to Vol. 12 (1972) [ 1)
3
Embed
Index to Vol. 12 (1972) · By Yukiaki HARA, Masaru TsucHIYA, and Shin-ichi KONDO ... By Kiichi NARITA, Shin.ii KOYAMA, Takehisa MAKINO, and Masayoshi OKAMURA Mechanical Properties
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Index to Vol. 12 (1972) Transactions of The Iron and Steel Institute of Japan
Table of Contents
No. 1 Rate of Desulfurization of Carbon-Saturated Iron Melts by a Rotating Cylinder of Calcium Carbide
By Hiroshi 001, Yukio OGUCHI, and Hakaru NAKATO Calculation of Internal Stress of Steel Induced during Quenching . . . . . . . . . . . . . . .
By Yasutsugu TosHIOKA, Munemitsu FuKAGAWA, and Yoshinori SAIGA The Effects of Carbon Contents and M 8 Temperatures on the Hardness of Martensitic Fe-Ni-C Alloys
By Minoru TAN AKA and Chong Sool CHOI Study on Properties of Medium Carbon Chromium Steel . . . . . . . . . . . . . . . . . . . .
By Kiyoshi NARIHIRO, Yasuo OTOGURO, Takashi OTSUBO, and Noboru MnoA Temperature and Strain Rate Dependences of Flow Stress in Metals and Alloys in Torsional Deformation
By Yuzo OHTAKARA, Tadahisa NAKAMURA, and Seita SAKUI
6
.. . ... . .... 16
.......... 26
...... 36
Study on Brittle Fracture Surfaces Formed at Low-temperature in Relation to Microstructures of Low Carbon Steels . .. . . 45 By Fukunaga TERASAKI and Hiroo OHTANI
Theoretical Analysis of Sintering Operation .. . ..................... 54
By Iwao MucHI andJiiz6 HIGUCHI Study on Flow Rate Control of Molten Metals by Electro-magnetic Pump . ... .. .......... . . . . . . .. . 64
By K enji CHIJIIWA, Mitsuo ITo, and Katsuhiko NoRO On the Reduction Degradation of Lime Sinter . . . . . . . .
By Minoru SASAKI, Tsuneo ENOKIDO, and Shin-ichi KoNDO .......................... 70
Simulation Experiment on Gas Flow Patterns in a Reheating Furnace . . . . . . . . . . . . . . . . . . . . . . . . . 72** By Syogo MATSUNAGA and Bunsho HIRAOKA
Abstracts from Tetsu-to-Hagane, Vol. 57 (1971), No. 14 (December) and Vol. 58 (1972), No. I (January) .......... 79t
No. 2 A Study of the Solidification of Heavy Carbon Steel Ingot
By Takasuke MoRI and Kiichi NARITA ........................... 83
Freezing Rate and Internal Structure of Heavy Carbon Steel Ingot By Kiichi NARITA and Takasuke MORI
Macrostructure of and Segregation in Continuously Cast Carbon Steel Billets By Hisashi MORI, Nobuyoshi TANAKA, Norio SATO, and Masazumi HIRAI
T empering of a High Carbon Martensite . . . . . . . . . . . . . . By Y. OHMORI, A . T . DAVENPORT, and R. W. K. HoNEYCOMBE
The Microstructure and Toughness of High Tensile Strength Steels By Hiroo OHTANI, Fukunaga TERASAKI, and Tatsuro KUNITAKE
Crystallography of Pearlite . . . . . . . . . . . . . . . . . . . . . By Y. OHMORI, A. T. DAVENPORT, and R. W. K. HoNEYCOMBE
Rate of R eduction of Silica in Slag by Carbon in Liquid Iron By Yasuji KAWAI, Katsumi MORI, and Mitsushi IcucHI
The Mechanical Properties of Low-Carbon Low-Alloy Bainitic Steels By Yasuya OHMORI, Hiroo OHTANI, and Tatsuro K UNITAKE
Production and Technique in the Iron and Steel Industry in Japan during 1971 By Tsuneyo IKr
Present Status and Future Prospects of Forged Steel Rolls in Japan . . . . . . . . By Kazuyoshi KOBAYASHI
Abstracts from Tetsu-to-Hagane, Vol. 58 (1972), Nos. 2 and 3 (February and March)
No. 3
92
. 102
.112
.118
.128
.138
.146
.155**
.172**
.183t
Some Considerations on the Nitrogen Transfer across Ga~-Liquid Iron Interface . . . . . . . . . . . . . . . . . . . . . 189 By Michio INOUYE and Takao CHOH
Identification marks suffixed to the page number: Unmarked: R esearch Articles, Research Note, and Letters to the Editor
* **
t
Reviews Reports Miscellaneous articles
Index to Vol. 12 (1972) [ 1)
[ 2 J
Equilibrium between FeO-MnO- Al2O 3 Slags and Molten Iron . . . . . . . . By Shigeaki MARUHASHI
Steady State Torsional D eformation and Restoration Process in Metals and Alloys By Yuzo OHTAKARA, Tadahisa NAKAMURA, and Seita SAKUI
Mechanism of Formation of Lined-up V,C8 Precipitates in Low Carbon Vanadium Steels ............... . By Hirowo G. SuzuKI and Mitsuru TANINO
Reduction of Iron-Oxide Pellets with Hydrogen at High Temperatures . . . . . . . . . . . . . . . . . . . . . . . . . By Yukiaki HARA, Masaru TsucHIYA, and Shin-ichi KONDO
Precipitation of AIN in High Purity Fe-Al-N Alloy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . By Yoshiro YAGI, Toshiro FuKUTSUKA, and Rikuo OGAWA
The Effect of Factors in Hot Rolling on the Properties of a C-Si-Mn Structural Steel By Isao KozAsu
A Study of Temper Brittleness of Tin Doped Steels by Auger Electron-Spectroscopic Method By Hirowo G. SuzuKI and Masatoshi ONO
Centralized Chemical Laboratory in the Mizushima Works of Kawasaki Steel Corporation -Outline and Its Functions By Yoshihide ENDO and Toshihiko HATA
Abstracts from Tetsu-to-Hagane, Vol. 58 (1972), Nos. 5 and 6 (April and May)
No. 4 Electrochemical Rapid Determination of Oxygen Content of Liquid Steel in Commercial LD Converter
By Mutsumi IHIDA and Yoshihiko KAWAI The Growth of Fe2 Ti-Laves Phase Precipitates in Fe-Ti Alloy during Aging
By Masaharu ToKIZANE, Yasutaka OKADA, and Imao TAMURA The Effect of Heat Treatment on the Creep Rupture Strength of a Low Carbon 2¼Cr-!Mo Steel
By Teruo YuKITOSHI and Kazuhiko NISHIDA Precipitation Behavior of AIN in Cold-Worked High Purity Fe-Al-N Alloy ...... .
By Rikuo OGAWA, Toshiro FuKUTSUKA, and Yoshiro YAGI Effect of M 8 Temperature on the First Stage of Tempering in Martensitic Fe-Ni-C Alloys
By Minoru TANAKA and Chong Sool CHOI Further Observations on Microstructural Changes of Structural Steels Due to Hot Rolling Deformation
By lsao KozAsu, Teruhiko SHIMIZU, and Koshiro TsuKADA Electric Resistivity of Molten Fe-Ni and Fe-Co Alloys . . . . . . .
By Yoichi ONO and Teinosuke YAGI Measurement of Crater Depth in Continuous Casting
By Noriyoshi NAGAOKA, Kinya INAMOTO, and Hidetaro NEMOTO Abstracts from Tetsu-to-Hagane, Vol. 58 (1972), Nos. 7 and 8 (June and July)
No. 5 Toughness and Effective Grain Size in Heat-Treated Low-Alloy High Strength Steels
By Shoichi MATSUDA, Tohru INOUE, Hiroshi MIMURA, and Yoshihiro OKAMURA Deoxidation and Desulfurization of Liquid Steel with Calcium Complex Alloys . . . . .
By Tohei OTOTANI and Yasuzi KATAURA
. 197
.207
. 217
. 223
. 233
.241
.251
.253**
.265t
.269
.276
.283
.291
.298
.305
.314
.317
.320t
.325
.334
Deoxidation of Molten Steel with Deoxidizer Containing Aluminum . . . . . . . . . . . . . . . . . . . . . . . . 343 By Koichi AsANO and Taketo NAKANO
The Precipitation of Molybdenum Carbides during the Isothermal Decomposition of an Fe-4.!0%Mo-0.23% C Austenite . 350 By Y asuya OHMORI
On the Reduction Model of Porous Iron-Oxide Pellet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358 By Yukiaki HARA
Effects of Arsenic, Antimony, and Tin on Strength, Recrystallization Temperature, and Snoek Peaks of Alpha Iron By Ko SoENO and Masatoshi TsucHIY A
Tensile Behaviors of Iron-Silver Laminates . . . . . . . . . . . . . . . . . By Nobuhisa UJIIYE and Isao TAKAHASHI
The Rate and Mechanism of the Silicon Transfer between Molten Slag and Metal By Masahiro AsHIZUKA, Masanori ToKUDA, and Masayasu OHTANI
A Phenomenological Dislocation Theory of Upper and Lower Yield Stresses of Iron By Naohiro !GATA and Satio SETO
Abstracts from Tetsu-to-Hagane, Vol. 58 (1972), Nos. 9 and 10 (August and September)
No. 6 Process Analysis of Blast Furnace
By Mitsuru TATE Significance of the Solidifying Zone on the Ingot Solidification
By Tadayoshi TAKAHASHI, Iwao HAGIWARA, and Kiyoshi ICHIKAWA On the Corrosion of Fe-2 % C-Al Alloys in Atmospheric Sulfur Vapor at 900°C
By Keizo NISHIDA and Toshio NARITA
Index to Vol. 12 (1972)
.367
.375
. 383
.393
.396t
.401*
.412
.422
( 3 J
The Effects of Aluminum and Nitrogen on the Creep Rupture Strength of Low Alloy Cr-Mo Steels .429 By Teruo YuKITOSHI and Kazuhiko NISHIDA
Optimization of Metallurgical Factors for Production of High Strength, High Toughness Steel Plate by Controlled Rolling .435 By Hiroyoshi MATSUBARA, Tatsumi OsuKA, Isao KozAsu, and Koshiro TsuKADA
Kinetics of Nitrogen Desorption Reaction of Liquid Iron and Steel .444 By Kiichi NARITA, Shin.ii KOYAMA, Takehisa MAKINO, and Masayoshi OKAMURA
Mechanical Properties of Rapidly Heated and Q•1enched Nickel-Chromium-Molybdenum Carburizing Steels
By Takeshi NAITO and Yamtada KrnAYASHI
.454
Diffusion of Oxygen in Liquid Iron
By Kazumi MORI and Kanae SuzuKI Electrochemical Measurement of the Activity of Iron Oxide in Fe0- Si0 2 Liquid Slag
By Yoshimoto WANIBE, Yutaka YAMAUCHI, Kenji KAWAI, and Hiroshi SAKAO A Model Describing the Relationship between Hot Rolling Ratio and Charpy Shelf Energy
By Hiroyoshi MATSUBARA, Tatsumi OsuKA, Isao KozAsu, and Koshiro TsuKADA Abstracts from Tetsu-to-Hagane, Vol. 58 (1972), Nos. 12 and 13 (October and November)