Inclinometer / Plumbline Inclinometer System Model No. TES-AN-25M Product Description TES-AN-25M vertical inclinometer system is used to measure lateral movement and deformation of earth works or a structure. It provides magnitude of inclination or tilt and its variation with time in structures like retaining/diaphragm walls, piles etc. TES-AN-25/M-H horizontal inclinometer system, provides significant quantitative data on magnitude of settlement/heave of foundations and its variation with time. It also provides the pattern of deformation, zones of potential danger and the effectiveness of construction control measures undertaken. The inclinometer system basically consists of inclinometer casings with couplings, probe with operating cable and datalogger. Accessories like dummy probe, calibration check jig, cable lowering bracket are available on demand. Specifications System accuracy ± 6 mm/30 m Vertical Inclinometer Probe Model No. TES-AN-25/2M Product Description TES-AN-25/2M consists of two precision accelerometers inside a waterproof stainless steel housing, fitted with two pairs of pivoted sprung wheels. The spring loaded wheels help to position the probe centrally inside the gage well at any required depth. A six pin connector is provided for connection to the cable. Operating cable graduated at every 0.5 m includes a high tensile straining member and is supplied with a easy to carry reel. Vertical probe Measuring range Resolution Temperature limit Dist. between wheels Dimensions ± 15˚ of vertical ± 30˚ , ± 50˚ optional ± 0.025 mm/500 mm 0 to 80˚C 500 mm 32 mm x 700 mm long Tritech Instruments Pte Ltd 31 Changi South Avenue 2, Presscrete Building, #02-01, Singapore 486478 Tel: +65 65465965 Fax:+65 65466527 Email: [email protected]www.tritech.com.sg eformation of formation o tructures like re ucture gnificant qu gnificant qu so provides the o provides the res undertaken res undertaken ting cable and cable and n demand. n demand. 30 m 0 m robe robe lerometers ins meters in h two pairs of h two pairs of elp to elp to position posi quired depth. uired depth o the cable. Op ble. O h tensile strainin tensile nge nge
4
Embed
Inclinometer System - Tritech · 2020-03-22 · Inclinometer / Plumbline Inclinometer System Model No. TES-AN-25M Product Description TES-AN-25M vertical inclinometer system is used
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Inclinometer / Plumbline
Inclinometer SystemModel No. TES-AN-25M
Product Description
TES-AN-25M vertical inclinometer system is used to measure lateral movement and deformation of earth works or a
structure. It provides magnitude of inclination or tilt and its variation with time in structures like retaining/diaphragm
walls, piles etc. TES-AN-25/M-H horizontal inclinometer system, provides signi!cant quantitative data on
magnitude of settlement/heave of foundations and its variation with time. It also provides the pattern of deformation,
zones of potential danger and the e"ectiveness of construction control measures undertaken. The inclinometer system
basically consists of inclinometer casings with couplings, probe with operating cable and datalogger. Accessories like
dummy probe, calibration check jig, cable lowering bracket are available on demand.
Speci�cations
System accuracy ± 6 mm/30 m
Vertical Inclinometer ProbeModel No. TES-AN-25/2M
Product Description
TES-AN-25/2M consists of two precision accelerometers inside a
waterproof stainless steel housing, !tted with two pairs of pivoted
sprung wheels. The spring loaded wheels help to position the probe
centrally inside the gage well at any required depth. A six pin
connector is provided for connection to the cable. Operating cable
graduated at every 0.5 m includes a high tensile straining member and
is supplied with a easy to carry reel.
Vertical probe
Measuring range
Resolution
Temperature limit
Dist. between wheels
Dimensions
± 15˚ of vertical
± 30˚ , ± 50˚ optional
± 0.025 mm/500 mm
0 to 80˚C
500 mm
32 mm x 700 mm long
Tritech Instruments Pte Ltd
31 Changi South Avenue 2, Presscrete Building, #02-01, Singapore 486478
lateral movement and deformation of earth works or a lateral movement and deformation of earth works or a
e. It provides magnitude of inclination or tilt and its variation with time in structures like retaining/diaphragm e. It provides magnitude of inclination or tilt and its variation with time in structures like retaining/diaphragm
provides signi!cant quantitative data on provides signi!cant quantitative data on
ve of foundations and its variation with time. It also provides the pattern of deformation, ve of foundations and its variation with time. It also provides the pattern of deformation,
zones of potential danger and the e"ectiveness of construction control measures undertaken. The inclinometer system zones of potential danger and the e"ectiveness of construction control measures undertaken. The inclinometer system
basically consists of inclinometer casings with couplings, probe with operating cable and datalogger. Accessories like basically consists of inclinometer casings with couplings, probe with operating cable and datalogger. Accessories like
dummy probe, calibration check jig, cable lowering bracket are available on demand.dummy probe, calibration check jig, cable lowering bracket are available on demand.
ELike model TES-AN-25, TES-AN-51M is used to measure lateral movement and deformations of earth works or a structure, but in this system the probe is left inside the casing for real time monitoring. The in-place sensor probe is !tted with a pair of pivoted sprung wheels. A string of sensors can be positioned inside a casing for a complete de"ection pro!le.
Speci�cations
Sensor
Measuring range
Accuracy
Temperature range
As tested under lab conditions
Uniaxial or biaxial
± 15˚ , ± 30˚
± 0.1 % fs
0 to 80˚C
1
1
Speci�cations
Measuring range
Resolution
Accuracy
Table size
± 75 mm (direct)
± 50 mm (inverted)
0.01 mm
0.1 mm
625 mm x 625 mm
Shape Accel ArrayProduct Description
SAA is an array of rigid segments separated by special joints. Triaxial MEMS gravity sensors in segments measure the tilt. SAA can be used vertically to calculate the 3D shape and horizontally to track vertical deformation. The two types of SAA, Field Array designed for low power consumption and long length and Research Array is designed to provide high speed data from all sensors.
Speci�cations
Environment
Operating Temp. Range
Acceleration
Water proof to 900 kPa
-20 to 70˚C
Range ± 2G
Direct and Inverted Plumb LineModel No. TES-DS-50/51
Product Description
TES-DS-50 (direct) and TES-DS-51 (inverted) plumb lines are used for monitoring tilt of a tall structure or a high rise building and for measurement and monitoring of relative displacement in a concrete or masonry dam. The readout system consists of reference pendulums and two travelling telescopes (one each for the X and Y axes) for measurement of displacement. An electronic measurement device is optionally available.
Tritech Instruments Pte Ltd
31 Changi South Avenue 2, Presscrete Building, #02-01, Singapore 486478
vertically to calculate the 3D shape and horizontally to track vertical vertically to calculate the 3D shape and horizontally to track vertical deformation. The two types of SAA, Field Array designed for low power deformation. The two types of SAA, Field Array designed for low power consumption and long length and Research Array is designed to consumption and long length and Research Array is designed to
Water proof to 900 kPaWater proof to 900 kPa
Direct and Inverted Plumb LineDirect and Inverted Plumb Line
TES-DS-50 (direct) and TES-DS-51 (inverted) plumb lines are TES-DS-50 (direct) and TES-DS-51 (inverted) plumb lines are monitoring tilt of a tall structure or a high rise building and for monitoring tilt of a tall structure or a high rise building and for measurement and monitoring of relative displacement in a concrete or measurement and monitoring of relative displacement in a concrete or masonry dam. The readout system consists of reference pendulums and masonry dam. The readout system consists of reference pendulums and two travelling telescopes (one each for the X and Y axes) for measurement two travelling telescopes (one each for the X and Y axes) for measurement of displacement. An electronic measurement device is optionally available.of displacement. An electronic measurement device is optionally available.