In partnership with : Organised by · Energy Management 1 ... "Industrial Energy Efficiency as Standard Practice", A. McKane, ... "ISO 50001 in Developing Countries and Emerging Economies"

0903

-068

With the scientific collaboration of the European Commission DG JRC

Institute for the Energy Renewable Energies Unit

End-use Energy Efficiency Activity

Organised by :In partnership with :

MenP-EEMODS09.indd 1 27/04/09 11:25:32

1 / 4

Monday 14 September

18:00 - 20:00 Opening Plenary Session chair Paolo Bertoldi, European Commission DG JRC

• Jean-Maurice Beurrier - Director of CETIM Nantes

• Bernard Gindroz ADEME • Representative of European Commission DG TREN (to be confirmed) • Michel Laroche - President of CETIM • Jacques Auxiette - President of Pays de la Loire Region • European Motor Challenge Award 2009

20:30 - 22:00 Welcome Party

Tuesday 15 September

9:00 – 10:15 Plenary Session Chair, representative of the French Compressor Trad e Association

1. " Energy-intelligent approach of the European motor and drive industry" – Juergen Sander,

President of CEMEP 2. "Standard range of PM Motor" - Philippe Thiery, LEROY SOMER, France 3. "CEN and ISO pump stardisation review" - Robert Pozzoli, CEN TC197 chairman

10:15 – 10:45 Coffee Break

10:45 - 13:00 Policies and Programmes 1 chair John Mollet, International Copper Association

1. "Global Motor Systems Network: the IEA 4E EMSA project", Conrad U. Brunner, A+B International, Switzerland 2. "Update on the IEA 4E Electric Motor Systems Annex: Sub Task C Testing Centres" - Sarah Hatch, Department of the Environment, Water, Heritage and the Arts, Australia 3. "Three phases of motor efficiency in North America: 1] Epact 2] NEMA Premium and 3] System Efficiency" - Robert Boteler, Emerson motors, USA 4. "Beyond NEMA Premium: An Overview of Efforts to Boost & Promote Motor Efficiency in the US" - Richard E. deFay, Copper Development Association, USA 5. "Energy Saving Program and Standards for 3-Phase Induction Motor in Korea" P-W. Han, Korea Electrotechnology Research Institute, KERI, Korea

Motors 1

chair Francesco Parasiliti, University of L'Aquila 1. "Voltage Unbalance Impact on the Performance of Line-Start Permanent-Magnet Synchronous Motors" - Fernando J. T. E. Ferreira, University of Coimbra, Portugal 2. "Constructing High Efficiency Motors with Cost-Effective Materials" John Petro, NovaTorque, Inc., USA 3. "Comparison of numerical and analytical simulation of saturated zig-zag flux in induction machines" - R. Hagen, Darmstadt University of Technology, Germany 4. "A numerical design platform for induction motor efficiency enhancement under cost and performance optimization constraints" - Alfredo Contin,, University of Trieste, Italy 5. "Autonomous reluctance generator for simultaneous ac and dc loads" Emeka S. Obe, Technische Universität Darmstadt, Germany

Energy Management 1 chair Aimee McKane, Lawrence Berkeley National Labo ratory

1. "Industrial Energy Efficiency as Standard Practice", A. McKane, Lawrence Berkeley National Laboratory, USA 2. "EMS as a policy instrument for energy efficiency in Ireland, Sweden and Denmark" Erik Gudbjerg, Lokalenergi, Denmark 3. "Energy Management Activities in Japan" Hiroyuki Kudo, The Energy Conservation Center, Japan 4. "Green Growth and EnMS in South Korea" Dong-Myung Kwon, Yonsei University and Dr. Ju-Myong Park, Ecosense Co, Korea 5. "ISO 50001 in Developing Countries and Emerging Economies" Marco Matteini, United Nations Industrial Development Organization

13:00 – 14:00 Lunch

2 / 4

14:00 - 15:45 Policies & Programmes 2 chair Paul Waide, Navigant Consulting

1. "The Australian Compliance and Testing Program – energy efficiency" Sarah Hatch, Department of the Environment, Water, Heritage and the Arts, Australia 2. "Brazilian Experiences in Industrial Induction Motor’s MEPS Implementation" George Alves Soares, ELETROBRÀS S.A., Brasil 3. "French Industry Potential of Energy Saving in Electrical Motors" Bruno Millet, Ceren, France

Motors 2 chair Wim Deprez, Department Electrical Engineering , KU Leuven

1. "Guide for the selection and application of energy-efficient motors" Martin Doppelbauer, SEW Eurodrive GmbH, Germany 2. "Switched Reluctance Motors for Compressors" - Robert Boteler, Emerson, USA 3. "Optimisation of a range permanent magnet synchronous machines for a wide range of industrial applications" - Alban Marino, LEROY SOMER, France 4. "Large-Scale Downsizing of Induction Motors Requiring Stator Rewinding as a Low-Cost Strategy to Save Energy and Extend Motors Lifetime" Fernando J. T. E. Ferreira, University of Coimbra, Portugal

Pump and Pump Systems 1 chair Gunnar Hovstadius , Consulting LLC

1. "Improving Efficiency and Quality of a Steel Production by using Centrifugal Pumps with Retrofitted Integrated Speed Control" - Gerhard Berge, KSB AG, Germany 2. "Energy-efficiency in Variable Speed Drive (VSD) controlled parallel pumping" Juha Viholainen, Lappeenranta University of Technology, Finland 3. "Optimizing life cycle costs (LCC) in water segment pumps" Giorgio Brianza, ABB S.p.A., Italy

15:45 – 16:15 Coffee break

16:15 - 18:30 Policies & Programmes 3

chair Conrad Brunner, A+B International

1. "Status and Outlook for Motor System Energy Conservation in China" Xin Sheng, China Energy Conservation Association (CECA), China 2. "Energy Conservation Standards and Energy Labelling for Electric Motors in China" - Zhao Yuejin, China National Institute of Standardization, China 3. "Strategy and Promotion for High Efficiency Motor System in Taiwan" Gwo-Jou Huang, Industrial Technology Research Institute (ITRI), Taiwan 4. "Technical and Economical Analysis of Elevators and Escalators Technologies" Aníbal de Almeida, University of Coimbra, Portugal 5. "The Energy Efficient Company Programme in Austria" Konstantin Kulterer, Austrian Energy Agency, Austria

Motor Test Methods chair Martin Doppelbauer, ,SEW Eurodrive GmbH

1. "Comparison of Existing Standard Methods of Determining Energy Efficiency for Three-Phase Cage Induction Motors" - Pierre Angers, Hydro-Québec, Canada 2. Update on the Asia Pacific Partnership ‘Harmonization of Test Procedures" Sarah Hatch, Department of the Environment, Water, Heritage and the Arts, Australia 3. "The effect of stray losses on direct and indirect methods of induction motor efficiency measurement" - Emanuel B. Agamloh, Advanced Energy Corp., USA 4. "Comparisons of Efficiency Testing Standards of Three-Phase Induction Machines" M-J. Kim, Korea Electrotechnology Research Institute, Korea 5. ""Comparison of Four Efficiency Estimation Methods" Enrique Quispe, Universidad Autónoma de Occidente, Colombia

Fans chair Hugh Falkner, Atkins PLC

1. " Is a single minimum energy efficiency level for fans a practical objective?", Geoff Lockwood, Ebm-papst UK ltd, United Kingdom 2. "The EuP Directive and the possible Implementation Measures for Fans", Peter Radgen, E.ON Energie AG, Germany 3. "Implementation of the European EuP Directive for fans" - Alain Guedel, CETIAT, France 4. "Energy classification for Fans" - Tony Breen, Nuaire ltd, United Kingdom

19:00 - 22:00 Dinner and Tour : Les Machines de l’Ile Museum

3 / 4

Wednesday 16 September

9:00 – 10:45 Energy Management 2 chair Erik Gudbjerg, Lokalenergi

1. "Energy management for Austria" Konstantin Kulterer, Austrian Energy Agency, Austria 2. "Regarding energy management of motor systems. Anecdotal evidence and practise from Long Term Agreement" - Frank Hartkamp, SenterNovem, Netherlands 3. "ECO Responsible Maintenance" Frederic Nectoux, LEROY SOMER, France 4. "Condition Monitoring of Induction motors using Vibration and Electrical signature analysis" - Frédéric Champavier, Metravib (AREVA group), France

Motors 3 chair Peter Zwanziger, Siemens

1. "Motors with Adjustable Speed Drives: Testing Protocol and Efficiency Standard" Anibal de Almeida, University of Coimbra, Portugal 2. "Task G – New Motor Technologies for the IEA 4E EMSA project Charles Gaisford, WSP Energy, United Kingdom 3."Recent development of Copper Rotor Motor in China" Daniel Liang, International Copper Association, China 4. "Energy Savings in the Minerals Industry with Copper-Rotor “Super-Premium” Electric Motors" - Dave Brender, Copper Development Association, USA

Compressors and HVAC - chair Chris Dee, BCAS

1. "Categorising the Efficiency of Industrial Air Compressors" Hugh Falkner, Atkins PLC, United Kingdom 2. Energy efficiency in compressed air systems " Anil Hingorani, Atlas Copco, Belgium 3. "Comparison of energy efficiency of refrigeration systems" Michele Merchat, Climespace, France

10:45 – 11:15 Coffee Break

11:15 - 13:00 Toold and Audits chair Charles Gaisford, WSP Energy

1. "Internet-Based Tools for Developing & Implementing Energy Saving Projects (ECP) in Motor-Driven Systems" - Sridharan Raghavachari, Online Energy Manager, USA 2. "Beyond MEPS: Getting Premium Efficiency Motors Installed in Your Plant" Gilbert A. McCoy, Washington State University, USA 3."Small Changes - Big Savings!" Claus M Hvenegaard, Danish Technological Institute, Denmark 4. "Energy Audits: University Approach With ABB 3". Niina Aranto, Lappeenranta University of Technology, Finland

Drives chair Anibal de Almeida, University of Coimbra

1. "Return on natural capital analyses with ABB drives" Timo Miettinen, ABB, Finland 2. "Using Sinusoidal Waveform Technology to Improve Overall Motor Efficiency A Technological Breakthrough for Motor Controllers" Amir Broshi, Power Electronics, Israel 3. "Ultracapacitors for Energy Storage in Industrial Grid-connected Systems" Augusto Di Napoli, University Roma Tre, Italy

Pump and Pump Systems 2 chair Frank Ennenbach Europump

1. "Results of EuP Lot 11: Pumps and Circulators" Hugh Falkner, Atkins PLC, United Kingdom 2. "ASME EA-2-2008 Energy Assessment for Pumping Systems", Gunnar Hovstadius, Gunnar Hovstadius Consulting LLC, USA 3. "Intelligent System for fluidic monitoring in order to improve life cycle cost and system safety" - Samuel Plumejault, CETIM, France 4. "Auditing pumping systems to unveil hidden energy saving potential" J. Nagesh Kumar, National Productivity Council, India

4 / 4

13:00 – 14:00 Lunch

14:00 - 15:45 Motor Challenge Projects

chair Gilbert A. McCoy, Washington State University

In this session the companies winners of the European Motor Challenge Award 2009 will present the implemented energy savings projects.

Motors 4 chair Robert Boteler, Emerson motors

1. "SKF Energy Efficient deep groove ball bearings for higher driveline efficiency" Marc Janssens, SKF France 2. "Devices Multi-Sensors (D.M.S.) for electric motors" Thierry Jacq, Electricité De France, France 3. "In - Situ Induction motor Efficiency Determination: an alternative for the implementation of maintenance focused on efficiency" Rosaura Castrillón, Universidad Autónoma de Occidente, Colombia 4. "Overview and Novel Proposals on In-Field Load Estimation Methods for Three-Phase Squirrel-Cage Induction Motors" Fernando J. T. E. Ferreira, University of Coimbra, Portugal

Pump and Pump Systems 3 chair Laure HELARD, PROFLUID

1. "Life cycle costing of valves systems" Jean-Yves Benaiteau, CETIM, France 2. "Pumps in seawater reverse osmosis", Pierre Corsin, FLUID CONSULT, France 3. "Innovative containment shell" Nicolas Weibel, Greene, Tweed & Co. Switzerland

15:45 – 16:15 Coffee Break

16:15 - 17:30 Closing Plenary chair Represnetative of CETIM

1. "Understanding Companies' Investment Decisions for Energy Efficiency" Paolo Bertoldi, European Commission DG JRC 2. "Energy Saving Potential in Motor Systems" - Paul Waide, Navigant Consulting, UK 3. "Motors for vehicles and wind turbines" - Representative of Leroy Somer 4. "Presentation of next EEMODS in 2011" - Representative of NEMA

Thurday 17 September

9:00 - 12:00 Company Visit : CETIM Nantes

Registration fees* : Are included: access to the conference, attendee's file, coffee breaks, lunch, welcome dinner, gala dinner, shuttle service, site tour.

HT TTC

Participant 680 euros 813,28 euros

Speaker 490 euros 586,04 euros

Registration on www.eemods09.frFind on this site all the practical information about the event

Contact : Rodolphe Beaugrand [email protected] Tél. : +33(0)3 44 67 36 82 Fax : +33(0)3 44 67 36 94

Gala diner – Machine de l’Ile Museum the 15th september Extraordinary machines, installed in the "Big Naves” of former shipyards.Visit the gallery of the Machines

Company visit CETIM Nantes the 17th september

Conference and Accomodation : *** WESTOTEL Nantes-Atlantique, located on the outskirts of Nantes, has modern facilities that meet the comfort requirements of business and individual, for a stay combining work and rest.

Rates

91,71 euros TTC per night for a single room

117,27 euros TTC per night for a double room

Situation: A free shuttle service will be organized for transfers between airport / train station and Westotel.

D 723PORNICNoirmoutier

D 249CHOLETPoitiers

A 83NIORTBordeaux

A 11PARISAngersLe MansTours

NANTES

Airport Nantes-Atlantique

La Chapelle-sur-Erdre

NANTES ATLANPOLE

Universities

N 137RENNESCaenSt-MaloSt-Brieuc

& stade de la BeaujoireParc des Expositions

D’ACCESPLAN

Train station

N 165LA BAULESt-NazaireVannesLorientBrest

La Loire

Créd

its p

hoto

s : ©

SAS

Wes

t-Ev

ents

- ©

Nau

tilus

Nan

tes

- © C

. Bar

ret C

etim

Réf.

0904

-069