171 73 G1/2" G1/2" WALL RANGE WALL INSERTED DEPTH 1220 WALL INSERTED DEPTH WALL RANGE 1220 73 155 G1/2" G1/2" G1/2" G1/2" All information is based on the latest product information available at the time of publication. Kohler Co. reserves the right to make changes in product characteristics, packaging, or availability at any time without notice. Please leave these instructions for the consumer. They contain important information. NOTES: 1. Flush the water supply pipes thoroughly to remove debris. 2. Observe all local plumbing and building codes. 3. Shut off the main water supply. 4. Do not remove the plaster guard fromthe valve body until instructed to. 5. Check for leaks before covering the pipes, repairs as needed. 6. The dimension from the finished wall to the centerline of the valve as shown on the sticker. 7. Min. working pressure is 0.2~0.3 bar, Ideal recommended pressure is 3 bar & Max. working pressure 8. Please ensure only apply water pressure test on the product, and empty the air in pipe and faucet thoroughly before the test. Please ensure maximum test pressure is 8.6 bar and test for 5 minutes. is 5.5 bar. 1218088-IN2-D 1 880IN-** AQUA TURBO 135 882IN-** AQUA TURBO 235 BEFORE YOU BEGIN 1218088-IN2-D INSTALLATION INSTRUCTIONS AQUA TURBO HANDLE OPERATION ROUGH-IN DIMENSIONS For 882, lift diverter, turn clockwise until it stops for shower, turn counter-clockwise until it stops for bath spout. 880IN-** 882IN-** Kohler India Corporation Pvt. Ltd. 6th Floor. Office Block, Ambiance Island, NH-8 IN Gurgaon - 122002, Haryana, India Customer Care No : 1800 103 2244 (Toll Free) & +91-124-4319685 / 86 Customer Care Email : [email protected] www.kohler.co.in Ground Centerline of valve 1220 to the ground (for shower faucet) 370 to up side of bath fringe (for bath & shower faucet) Centerline of valve Ground