In-Building Solution ProductsV1.0

Antenna Products

Passive Components

In-Building Solution Products

Catalog2011

Table of Contents

Product Description..................................................................................... 1

Index..............................................................................................................2

Antenna Product.......................................................................................... 4

Indoor Ceiling Antenna.................................................................................. 5

Indoor Wall Mount Antenna.......................................................................... 10

Logarithmic Periodic Antenna...................................................................... 15

Yagi Antenna.................................................................................................. 18

Passive Component....................................................................................... 22

Cavity Power Splitter...................................................................................... 23

Microstrip Power Splitter................................................................................ 26

Cavity Tapper................................................................................................. 29

3dB Hybrid .................................................................................................... 34

Attenuators...................................................................................................... 36

Loads............................................................................................................... 38

Combiners........................................................................................................ 40

Antenna Product Description：

HA OA -0809/1825- N - 2/5

① ② ③ ④ ⑤

① Company：HA Huawei Agisson

② Type： OA Omnidirectional Antenna，

DA directional Antenna ，

LA Logarithmic Periodic Antenna，

YA Yagi Antenna

③ Frequency range (MHz)：0809 800~900M，1825 1800~2500M

④ Connector ：N N-Female

⑤ Gain：2/5 2dBi/5dBi

Passive Component Product Description：

HA S 0825 N 100－ 02

① ② ③ ④ ⑤ ⑥

① Company：HA Huawei Agisson

② Type：S Power Splitter ，T Tapper ，

C Combiner ，L load/ Attenuator

③ Frequency range (MHz)：0825 800~2500M

④ Connector ：N N-Female

⑤ Power capacity：100 100W （ Cavity >100W， Microstrip <100W）

⑥ specifications：

S××××02 2 Power Splitter

T××××06 6dB Tapper

C××××02 2 port combiner

L××××05 5dB Attenuator

Type Frequency Range(MHz)/

Gain/Pattern Model Type no. Page

Omnidirectional

Ceiling Antenna

698 - 960 /2dBi/360°

1710 - 2700/5dBi/360°

HAOA-0709/1827-N-2/5

99042XWM 6

806 - 960 /2dBi/360°

1710 - 2500/5dBi/360°

HAOA-0809/1825-N-2/5

27010722 7

Directional

Ceiling Antenna

806 - 960 /4dBi/95°

1710 – 2500/6dBi/75°

HADA-0809/1825-N-4/6

27010715 8

806 - 960 /5dBi/95°

1710 – 2500/7dBi/75°

HADA-0809/1825-N-5/7

27010716 9

Wall Mount

Antenna

806 - 960 /7dBi/90°

1710 – 2500/8dBi/75°

HADA-0709/1827-N-5/8

27010711 11

806 - 960 /8dBi/90°

1710 – 2500/10dBi/75°

HADA-0809/1825-N-7/8

27010714 12

806 - 960 /6dBi/100° HADA-0809-N-6 27010713 13

806 - 960 /9dBi/65° HADA-0809-N-9 27010712 14

Logarithmic

Periodic Antenna

806 - 960 /8dBi/90°

1710 – 2500/9dBi/75°

HALA-0809/1825-N-8/9

27010720 16

806 - 960 /10dBi/90°

1710 – 2500/11dBi/75°

HALA-0809/1825-N-10/11

27010721 17

Yagi Antenna

806 - 960 /10dBi/65° HAYA-0809-N-10 27010718 19

806 - 960 /11dBi/40° HAYA-0809-N-11 27010719 20

1920 – 2170/10dBi/40° HAYA-0809-N-11 27010717 21

Antenna

Index

Type Frequency Range(MHz) Model Type no. Page

3dB Hybrid

698 - 2700 HAT0727N200-03 27030090 35

800 - 2500 HAT0825N200-03 27030087 35

Attenuators

0 - 3000 HAL0030N005-10 27110013 37

0 - 3000 HAL0030N100-30 27110014 37

Load

0 - 3000 HAL0030N025 27110009 39

0 - 3000 HAL0030N050 27110010 39

0 - 3000 HAL0030N100 27110011 39

Combiner

806 – 960/1710 – 2170 HAC0821N100-02 27030082 41

806 – 2170/2400 – 2500 HAC0825N100-02 27030084 42

806 – 960/1710 – 1880/

1920 – 2170 HAC0821N100-03 27030083 43

806 – 960/1710 – 1880/

1920 – 2170/2400 - 2500 HAC0825N100-04 27030085 44

Passive Components

Type Frequency

Range(MHz) Model Type no. Page

Cavity Power Splitter

698 - 2700 HAS0727N200-02 27020092 24

698 - 2700 HAS0727N200-03 27020093 24

698 - 2700 HAS0727N200-04 27020094 24

800 - 2500 HAS0825N200-02 27020086 25

800 - 2500 HAS0825N200-03 27020087 25

800 - 2500 HAS0825N200-04 27020088 25

Microstrip Power

Splitter

698 - 2700 HAS0727N100-02 27020095 27

698 - 2700 HAS0727N100-03 27020096 27

698 - 2700 HAS0727N100-04 27020097 27

800 - 2500 HAS0825N100-02 27020089 28

800 - 2500 HAS082500-03N1 27020090 28

800 - 2500 HAS0825N100-04 27020091 28

Cavity Tapper

698 - 2700 HAT0727N200-06 27130031 30

698 - 2700 HAT0727N200-10 27130032 30

698 - 2700 HAT0727N200-15 27130033 30

698 - 2700 HAT0727N200-20 27130034 31

698 - 2700 HAT0727N200-30 27130035 31

698 - 2700 HAT0727D200-40 27130036 31

800 - 2500 HAT0825N200-05 27130015 32

800 - 2500 HAT0825N200-06 27130020 32

800 - 2500 HAT0825N200-07 27130016 32

800 - 2500 HAT0825N200-10 27130021 32

800 - 2500 HAT0825N200-15 27130022 33

800 - 2500 HAT0825N200-20 27130023 33

800 - 2500 HAT0825N200-30 27130024 33

800 - 2500 HAT0825D200-40 27130025 33

Passive Components

Index

Indoor Omni-directional Ceiling Antenna

Indoor directional Ceiling Antenna

Wall Mount Antenna

Logarithmic Periodic Directional Antenna

Yagi Antenna

Antenna Product

Feature:

Multiband Design for GSM, CDMA, DCS ,UMTS and LTE

Compact and light weight

Easy Installation

Minimal Visual Impact

Integrated low-loss coaxial cable pigtail

Ceiling Antenna

Ceiling Antenna

Type no. 99042XWM

Electrical Properties

Frequency range (MHz) 698 - 960 / 1710 - 2700

Polarization Vertical

VSWR 698 - 800 MHz ≤ 1.7

800 - 2700 MHz ≤ 1.5

Gain (dBi) 698 - 960 MHz 2

1710 - 2700 MHz 5

3dB beam width (horizontal) (°) 360

Intermodulation IM3 (dBc) -150 (2 x 33 dBm)

Max. input power (W) 100

Impedance (Ω) 50

Grounding DC Grounding

Mechanical Properties

Dimensions (H x D) (mm) Φ:185, H:90

Operating temperature (℃) -30 to +55

Connector 30 cm jumper and N-50

HAOA-0709/1827-N-2/5

2/5 dBi Omnidirectional Ceiling Antenna

1. Drill a Ф18 hole on the ceiling.

2. Install the antenna as the following picture shows then tighten the bolts.

3. Fix the cable and antenna connector and use water proof tape at the point of connector.

Install step

900 MHz vertical pattern 2100MHz vertical pattern

Antenna Pattern

2100 MHz horizontal pattern 900 MHz horizontal pattern

Type no. 27010722

Electrical Specification

Frequency range (MHz) 806 - 960 1710 - 2500


VSWR < 1.5

Gain (dBi) 2 5

3dB beam width (horizontal) (°) 360 360

3dB beam width (vertical) (°) 85 40

Max. CW input power (W) 50

Impedance (Ω) 50


Mechanical Specification

Dimensions (H x D) (mm) 90 x ф185

Packing dimensions (H x W x D) (mm) 270 x 270 x 150

Net weight (with installation kit) (kg) 0.35

Packing weight (kg) 0.9

Radome material UV ABS


Connector N-Female

HAOA-0809/1825-N-2/5

2/5 dBi Omnidirectional Ceiling Antenna

1. Drill a Ф18 hole on the ceiling.



Install step

Antenna Pattern

900 MHz vertical pattern 900 MHz horizontal pattern 2100 MHz horizontal pattern 2100 MHz vertical pattern

Type no. 27010715




VSWR < 1.5

Gain (dBi) 4 6



Front to back ratio (dB) ≥ 4 ≥ 8


Impedance (Ω) 50









Connector N-Female

HADA-0809/1825-N-4/6

4/6 dBi Directional Ceiling Antenna

Install step Install step

1. Drill a hole on the ceiling, and please make sure the diameter is between Ф18 and Ф35.



Antenna Pattern

900 MHz horizontal pattern 2100 MHz horizontal pattern 2100 MHz vertical pattern 900 MHz vertical pattern

Type no. 27010716




VSWR < 1.5

Gain (dBi) 5 7





Impedance (Ω) 50





Net weight(with installation kit) (kg) 0.34




Connector N-Female

HADA-0809/1825-N-5/7

5/7 dBi Directional Ceiling Antenna

Install step




Antenna Pattern

900 MHz vertical pattern 900 MHz horizontal pattern

2100 MHz horizontal pattern 2100 MHz vertical pattern

Feature:



Easy Installation



Wall Mount Antenna

Wall Mount Antenna

Type no. 27010711




VSWR < 1.5

Gain (dBi) 7 8





Impedance (Ω) 50



Dimensions (H x W x D) (mm) 210 x 180 x 44






Connector N-Female

HADA-0809/1825-N-7/8

7/8 dBi Wall Mount Antenna

Install step

1. Punch the correct size hole with the drill, and put the stopper into the hole, then after installing the M4×25 screw, fix them into the stepper. 2. Hang the antenna on the installation piece and install the connector.

Antenna Pattern



Type no. 27010714




VSWR < 1.5

Gain (dBi) 8 10





Impedance (Ω) 50









Connector N-Female

HADA-0809/1825-N-7/8

7/8 dBi Wall Mount Antenna

Install step




Antenna Pattern



Type no. 27010713


Frequency range (MHz) 806 - 960


VSWR < 1.5

Gain (dBi) 6


3dB beam width (vertical) (°) 78

Front to back ratio (dB) ≥ 6

Electrical downtilt (°) 0


Impedance (Ω) 50







Mechanical tilt (°) 0 - 10

Radome material UV PVC


Connector N-Female

HADA-0809-N-6

6 dBi Wall Mount Antenna

Install step

1. Punch the correct size hole with the drill, and put the stopper into the hole, then after installing the M4×25 screw, fix them into the stepper.

2. Hang the antenna on the installation piece and install the connector.

Antenna Pattern


Type no. 27010712




VSWR < 1.5

Gain (dBi) 9




Electrical downtilt (°) 0


Impedance (Ω) 50








Radome material UV PVC


Connector N-Female

HADA-0809-N-9

9 dBi Wall Mount Antenna

Install step

1. Punch the correct size hole with the drill, and put the stopper into the hole, then after installing the M4×25 screw, fix them into the stepper.

2. Hang the antenna on the installation piece and install the connector.


Antenna Pattern

Feature:

Multiband Design

High Gain


Easy Installation



Logarithmic Periodic Directional Antenna

Logarithmic Periodic Antenna

Type no. 27010720




VSWR < 1.5

Gain (dBi) 8 9





Impedance (Ω) 50










Connector N-Female

HALA-0809/1825-N-8/9

8/9 dBi Logarithmic Periodic Directional Antenna

Install step

1. Combine the installation piece, Serrated Bracket, M8 U clip by

using 2 pcs of M8 bolts, flat washer, and spring washer. Bolts

are not fully tightened.

2. Install the above combination on the antenna with 2 pcs of screws

in M6 x 20, spring washer and flat washer.

3. The whole combination coming from above two steps would be

installed on the correct position of theф30 toф50 pole and

tighten the M8 bolts.(See the following picture)

Antenna Pattern



Type no. 27010721




VSWR < 1.5

Gain (dBi) 10 11





Impedance (Ω) 50





Net weight (with installation kit) (kg) 1

Packing weight (kg) 2




Connector N-Female

HALA-0809/1825-N-10/11

10/11 dBi Logarithmic Periodic Directional Antenna

Install step

1. Combine the installation piece, Serrated Bracket, M8 U clip by

using 2 pcs of M8 bolts, flat washer, and spring washer. Bolts

are not fully tightened.

2. Install the above combination on the antenna with 2 pcs of screws

in M6 x 20, spring washer and flat washer.

3. The whole combination coming from above two steps would be

installed on the correct position of theф30 toф50 pole and

tighten the M8 bolts.(See the following picture)

Antenna Pattern



Yagi Antenna

Feature:

For repeater donor, and other specialized application

Low weight, easy installation.

High wind load and ice load

High reliability

IP65

Yagi Antenna

HAYA-0809-N-10

10 dBi Yagi Directional Antenna

Type no. 27010718




VSWR < 1.5

Gain (dBi) 10





Impedance (Ω) 50








Connector N-Female

Install step

1. Install the U clip onto the pole, then install the antenna and

fix the flat washer, spring washer and bolt.

2. Fix the cable and antenna connector and use water proof

tape at the point of connector.

3. Fix the cable on the pole after finishing the installation.

Antenna Pattern


Type no. 27010719




VSWR < 1.5

Gain(dBi) 11





Impedance (Ω) 50








Connector N-Female

HAYA-0809-N-11







Install step

Antenna Pattern


Type no. 27010717




VSWR < 1.5

Gain (dBi) 12





Impedance (Ω) 50








Connector N-Female

HAYA-0809-N-11







Install step


Antenna Pattern

Passive Component


Microstrip Power Splitter

Cavity Tapper

Microstrip Tapper

3dB Hybrid

Attenuator

Load

Combiner


Feature


200 watt average power rating

Minimal RF insertion loss

High reliability

Designed for indoor and outdoor applications

RoHS compliant

IP65



Type no. 27020092 27020093 27020094

Model HAS0727N200-02 HAS0727N200-03 HAS0727N200-04


Dividing 2 3 4

VSWR ≤ 1.2 ≤ 1.25 ≤ 1.3

Distribute loss (dB) 3.0 4.77 6.02

Insertion loss(Without distribute loss) (dB) ≤ 0.2 ≤ 0.3 ≤ 0.3

IM3 (dBc) ≤ -150 (2 x 43 dBm)


Impedance (Ω) 50

FIT(ppm / year) 500


Dimensions (H x W x D) (mm)

without connectors 200 x 24.5 x 24.5 230 x 24.5 x 24.5


Storage temperature (℃) -40 to +55

Application scene Indoor / Outdoor IP65

Connector N-Female

HAS0727N200-03

1


HAS0727N200-02 HAS0727N200-04


Type no. 27020086 27020087 27020088



Dividing 2 3 4

VSWR ≤ 1.3

Insertion loss (Without distribute loss) (dB) ≤ 0.2 ≤ 0.3 ≤ 0.3

IM3 (dBc) ≤ -140 (2 x 43 dBm)


Impedance (Ω) 50

Passband ripple (dB) ≤ 0.2 ≤ 0.3 ≤ 0.3

Channel balance (dB) ≤ 0.3 ≤ 0.3 ≤ 0.3

FIT (ppm / year) 500


Dimensions (H x W x D) (mm) 177.5 x 25 x 25 200 x 25 x 25 200 x 25 x 25

Packing dimensions (H x W x D) (mm) 255 x 75 x 35 255 x 75 x 35 255 x 75 x 50

Net weight (kg) 0.184 0.210 0.229

Packing weight (kg) 0.223 0.245 0.268



Application scene Indoor

Connector N-Female

HAS0825N200-02 .

HAS0825N200-03

HAS0825N200-04



Feature:



Minimal RF insertion loss

High reliability

Low passive inter-modulation (PIM)


RoHS compliant

IP65



Type no. 27020095 27020096 27020097



Dividing 2 3 4

VSWR ≤ 1.3 ≤ 1.25 ≤ 1.3

Isolation between ports (dB) > 20



IM3 (dBc) ≤ -130 (2 x 43 dBm)


Impedance (Ω) 50




without connectors 53 x 50 x 18 90 x 86 x 18 118 x 86 x 19




Connector N - Female

HAS0727N100-02

HAS0727N100-03 1

HAS0727N100-04



Type no. 27020089 27020090 27020091



Dividing 2 3 4

VSWR ≤ 1.3

Isolation between ports (dB) > 20


IM3 (dBc) ≤ -130 (2 x 43 dBm)


Impedance (Ω) 50

Passband ripple (dB) ≤ 0.3 ≤ 0.35 ≤ 0.35

Channel balance (dB) ≤ 0.2 ≤ 0.3 ≤ 0.3



Dimensions (H x W x D) (mm) 49 x 58 x 22 84 x 84 x 22 109 x 78 x 22

Packing dimensions (H x W x D) (mm) 109 x 72 x 30 154 x 98 x 30 138 x 123 x 30

Net weight (kg) 0.17 0.321 0.399





Connector N-Female

HAS0825N100-02

HAS0825N100-03

HAS0825N100-04


Cavity Tapper

Feature:


Minimal RF insertion loss,


High reliability

200 watt average main line power


RoHS compliant

IP65

Cavity Tapper


Type no. 27130031 27130032 27130033

Model HAT0727N200-06 HAT0727N200-10 HAT0727N200-15


Coupling(dB) 6 ±0.7 10 ±1.0 15 ±1.0

VSWR ≤ 1.2

Isolation between ports (dB) ≥ 26 ≥ 30 ≥ 35


Insertion loss(Without distribute loss)(dB) ≤ 0.25

IM3 (dBc) ≤ -140 (2 x 43 dBm)


Impedance (Ω) 50




without connectors 130 x 45 x 16

Connector N - Female




HAT0727N200-06/10/15

Cavity Tapper


Type no. 27130034 27130035 27130036

Model HAT0727N200-20 HAT0727N200-30 HAT0727D200-40


Coupling (dB) 20 ±1.0 30 ±1.5 40 ±1.5

VSWR ≤ 1.2

Isolation between ports (dB) ≥ 40 ≥ 50 ≥ 50


Insertion loss (Without distribute loss)(dB) ≤ 0.25

IM3 (dBc) ≤ -140 (2 x 43 dBm)


Impedance (Ω) 50



Dimensions (H x W x D) (mm) 130 x 45 x 16 120 x 43 x 38

Connector N-Female

Input port: 7/16DIN-50-Male

Output port: 7/16DIN-50-Female

Coupling port: N-50-Female




HAT0727D200-40 HAT0727N200-20/30

2

Cavity Tapper


Type no. 27130015 27130020 27130016 27130021

Model HAT0825N200-05 HAT0825N200-06 HAT0825N200-07 HAT0825N200-10


Coupling (dB) 5 ±0.5 6 ±0.5 7 ±0.5 10 ±1.0

Coupling passband ripple (dB) ≤ 1 ≤ 1 ≤ 1 ≤ 2

VSWR ≤ 1.25

Isolation between ports (dB) ≥ 25 ≥ 26 ≥ 27 ≥ 30

Insertion loss (Without distribute loss) (dB) ≤ 0.5

IM3 (dBc) ≤ -120 (2 x 43 dBm)


Impedance (Ω) 50



Dimensions (H x W x D) (mm) 120 x 40 x 16.5

Packing dimensions (H x W x D)(mm) 175 x 75 x 30

Net weight (kg) 0.24





Connector N-Female

HAT0825N200

Cavity Tapper


Type no. 27130022 27130023 27130024 27130025

Model HAT0825N200-15 HAT0825N200-20 HAT0825N200-30 HAT0825D200-40


Coupling(dB) 15 ±1 20 ±1 30 ±1 40 ±1.5

Coupling passband ripple(dB) ≤ 2 ≤ 2 ≤ 2 ≤ 3

VSWR ≤ 1.25

Isolation between ports(dB) ≥ 35 ≥ 40 ≥ 50 ≥ 60

Insertion loss (Without distribute loss) (dB)

≤ 0.3 ≤ 0.3 ≤ 0.3 ≤ 0.3

IM3 (dBc) ≤ -120 (2 x 43 dBm) ≤ -140 (2 x 43 dBm)


Impedance (ohm) 50

FIT(ppm / year) 500


Dimensions (H x W x D) (mm) 109 x 47 x 38 120 x 40 x 16.5 120 x 40 x 16.5 109 x 47 x 38

Packing dimensions (H x W x D)(mm) 180×80×50 175×75×30 175 x 75 x 30 180 x 80 x 50

Net weight (kg) 0.47 0.24 0.24 0.47

Packing weight (kg) 0.5 0.26 0.26 0.5




Connector N-Female

Input port:7/16DIN-Male

Output port: 7/16DIN-Female

Coupling port:N-Female

Cavity Tapper

HAT0825D200-40

3dB Hybrid

Feature:


High isolation


Low VSWR

Combines non-coherent signals


High reliability

IP65

3dB Hybrid


Type no. 27030090 27030087

Model HAT0727N200-03 HAT0825N200-03


Coupling (dB) 3 3

VSWR ≤ 1.2 ≤ 1.3

Isolation between ports (dB) ≥ 23 > 20

Insertion loss (dB) 3 ±0.5 ≤ 0.5

IM3 (dBc) ≤ -140 (2 x 43 dBm) ≤ -140 (2 x 43 dBm)

Max. input power (W) 200 200

Impedance (Ω) 50 50

Passband ripple (dB) ≤ 0.7 ≤ 0.5

FIT (ppm / year) 500 500


Dimensions (H x W x D) (mm) 170 x 45 x 20 142 x 43.5 x 23

Packing dimensions (H x W x D) (mm) / 152 x 103 x 30

Net weight (kg) / 0.428

Packing weight (kg) / 0.4668

Operating temperature (℃) -30 to +50 -30 to +50

Storage temperature (℃) -40 to +55 -40 to +55

Application scene Indoor / Outdoor IP65 Indoor

Connector N-Female N-Female

1

3dB Hybrid

Attenuators

Feature:

Wide frequency range ,0 to 3G

Power rating up to 100W

Low VSWR

High reliability

Female/Female or Male/Female connector

Attenuator


Type no. 27110013 27110014

Model HAL0030N005-10 HAL0030N100-30

Frequency range (MHz) 0-3

VSWR 1.2

Attenuation precision (dB) 10 ±0.35 30 ±0.5

Max. input power (W) 5 100

Impedance (Ω) 50

Passband ripple (dB) ≤ 0.7 ≤ 1.0



Dimensions (H x W x D) (mm) Φ20 x 52.7 141.5 x 100 x 65

Packing dimensions (H x W x D) (mm) 80 x 40 x 40 206 x 175 x 115

Net weight (kg) 0.0598 1.521

Packing weight (kg) 0.06 1.58




Connector Input port: N-Male

Output port: N-Female

HAL0030N005-10 HAL0030N100-30

Attenuator

Feature:

Resistive film load

Wide frequency range ,0 to 3G

Low VSWR

High reliability

Load

Load


Type no. 27110009 27110010 27110011

Model HAL0030N025 HAL0030N050 HAL0030N100

Frequency range (GHz) 0-3

VSWR ≤ 1.2

Max. input power (W) 25 50 100

Impedance (Ω) 50

MTBF (hours) 50,000



Dimensions (H x W x D) (mm) 80 x 60.5 x 65 80 x 60.5 x 65 100 x 141.5 x 65

Packing dimensions (H x W xD) (mm)

175 x 103 x 115 175 x 103 x 115 206 x 175 x 115

Net weight (kg) 0.535 0.535 1.4868





Connector N-Male

Load

HAL0030N100 HAL0030N25 HAL0030N50

Combiner

Feature:

Minimum Loss, Hybrid design

High Isolation

Low VSWR

Multi-Inputs/band for 800/900/1800/2100

High Reliability, RoHS compliant

Low PIM , guaranteed performance

Load


Type no. 27030082

Model HAC0821N100-02

Getway Port2 - Port1 Port3 - Port1


VSWR ≤ 1.25

Isolation between ports (dB) ≥ 80


IM3 (dBc) ≤ -140 (2 x 43 dBm)

Rejection ≥ 80


Impedance (Ω) 50

Passband ripple (dB) ≤ 0.6



Dimensions (H x W x D) (mm) 151 x 92.5 x 46







Connector N-Female

Combiner (CDMA&GSM/DCS&WCDMA)

HAC0821N100-02


Type no. 27030084


Getway Port2 - Port1 Port3 - Port1


VSWR ≤ 1.25



IM3 (dBc) ≤ -140 (2 x 43 dBm)

Rejection ≥ 80


Impedance (Ω) 50











Connector N-Female

Combiner(GSM&DCS&3G/WLAN)

HAC0825N100-02


Type no. 27030083


Getway Port2 - Port1 Port3 - Port1 Port4 - Port1

Frequency range (MHz) 806 - 960 1710 - 1880 1920 - 2170

VSWR ≤ 1.25



IM3 (dBc) ≤ -140 (2 x 43 dBm)

Rejection ≥ 80


Impedance (Ω) 50




Dimensions (H x W x D) (mm) 151 x 92.5 x 46







Connector N-Female

Combiner (CDMA&GSM/DCS/WCDMA)

HAC0821N100-03


Type no. 27030085


Getway Port2 - Port1 Port3 - Port1 Port4 - Port1 Port5 - Port1

Frequency range (MHz) 806 - 960 1710 - 1880 1920 - 2170 2400 - 2500

VSWR ≤ 1.3



IM3 (dBc) ≤ -140 (2 x 43 dBm)

Rejection ≥ 80


Impedance (Ω) 50











Connector N-Female

Combiner (CDMA&GSM/DCS/WCDMA/WLAN)

HAC0825N100-04

Copyright © Huawei Technologies Co., Ltd. 2011. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co.,

Ltd.

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Industrial Base

Bantian Longgang

Shenzhen 518129, P.R. China

Tel: +86-755-28780808

Version No.: M3-308130299-20100718-C-2.0

www.huawei.com

Trademark Notice

and HUAWEI are trademarks or registered trademarks of Huawei Technologies Co., Ltd.

Other trademarks, product, service and company names mentioned are the property of their respective owners.

NO WARRANTY

THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT

AS REQUIRED BY APPLICABLE LAWS,NO WARRANTIES OF ANY KIND,

EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY,

RELIABILITY OR CONTENTS OF THIS MANUAL.TO THE MAXIMUM EXTENT

PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI

TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL,

INDIRECT, OR CONSEQUENTIALDAMAGES, OR LOST PROFITS, BUSINESS,

REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS ARISING

OUT OF OR IN CONNECTION WITH THE USE OF THIS MANUAL.

In-Building Solution ProductsV1.0

Documents

ppm year

model frequency range

electrical specification type

mechanical specification dimensions

male output port

coupling passband ripple

female coupling port

packing dimensions