TECNIGAS telephone: 0114 2462027 | Fax: 0114 2454232 1 Exhausts Only Fit 50cc Models Unless Otherwise Stated IMPORTANT WARRANTY INFORMATION FOR ALL TECNIGAS EXHAUSTS TECNIGAS are now emphasising strict conditions on warranty Tecnigas silencers and exhausts carry a 60 day warranty. The guarantee is for manufacturing faults of materials and production. The warranty is valid from the day of purchase only if accompanied by a dated proof of purchase receipt. All exhausts once fitted may require either carburettor re-jetting, and in the case of Automatic Scooters, may require Variator Rollers and Springs to be replaced. These may be different to what was originally fitted to the machine. Other alterations to the machine will also have to be taken into consideration, i.e, conversion kits, larger carburettor fitted etc. A worn drive belt will slip and cause problems, especially when fitting a part such as an exhaust which will enhance performance. A worn drive belt also lowers gearing slightly and create the misinterpretation that the exhaust is down on performance. A worn clutch that did not slip previously, can begin to slip because of an increase in performance. Scooters that have rev limiters fitted, may not achieve the full potential power increase of a new exhaust. Certain exhausts come with rollers, but assuming that fitting the rollers supplied are correct, can sometimes be misleading. For example :- one particular exhaust supplied by Tecnigas may fit several machines. Please check that the rollers enclosed are for the machine concerned. Certain exhausts have a conical restrictor in the down pipe to restrict power. A new exhaust being returned for credit or exchange must be in the original undamaged box, complete with all fittings and instructions. Only the Warranty Department are authorised to sanction Warranties, therefore the company will not honour any arrangements directly made with Representatives or any other members of the company. Claims under Warranty :- All exhausts must be returned for our inspection, however please call us first. Returning an exhaust :- A close thorough inspection is needed to check that there are no dents, grounding marks, scuffs, or filed holes - made into slots, also that the mounting bushes are intact and have been used. If there are signs that the exhaust has been loose on the machine, there will be tell tail signs of polishing on the mounting brackets. Exhausts coming loose or falling from the machine are not covered by warranty. All exhausts must be returned complete with fittings e.g. mounting bracket etc. Also, you will have to supply a proof of purchase receipt. It is also important to note that Sports / Race type of exhausts that are supplied with a clear lacquer finish over bare metal. These are sold as a fashion item to emulate race expansions and should be treated with an aftermarket heat resistant paint. Once the lacquer has burned off, the bare metal exhaust will be exposed to the elements, which will cause the exhaust to deteriorate, unless some form of protection is used. Due to the type of product, its use and location, rust is not covered by warranty. If an exhaust is allowed to deteriorate to the point of disintegration, it is not possible to cover this under warranty. A failing exhaust will be more evident to the owner. Noise level and vibration would increase considerably and there would be a distinct difference in power output. It is the owners responsibility to report any fault as soon as possible to the supplying dealer. It is the owners responsibility to ensure that any problems with a exhaust are not allowed to escalate to the point the exhaust falls apart. This is not covered by warranty, regardless of mitigating circumstances. Mufflers / End Cans can be repacked, and as such, after a reasonable period should be considered for such action. Staniforths are proud to be the U.K’s Official Sole Distributor of Tecnigas Exhausts
32
Embed
IMPORTANT WARRANTY INFORMATION FOR ALL …staniforths.co.uk/Documents/01-Tecnigas.pdf · IMPORTANT WARRANTY INFORMATION FOR ALL TECNIGAS EXHAUSTS TECNIGAS are now emphasising strict
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
TECN
IGAS
telephone: 0114 2462027 | Fax: 0114 24542321 Exhausts Only Fit 50cc Models Unless Otherwise Stated
IMPORTANT WARRANTY INFORMATION FOR ALL TECNIGAS EXHAUSTS
TECNIGAS are now emphasising strict conditionson warranty Tecnigas silencers and exhausts carrya 60 day warranty. The guarantee is formanufacturing faults of materials and production.The warranty is valid from the day of purchase onlyif accompanied by a dated proof of purchasereceipt.
All exhausts once fitted may require eithercarburettor re-jetting, and in the case of AutomaticScooters, may require Variator Rollers and Springsto be replaced. These may be different to what wasoriginally fitted to the machine. Other alterationsto the machine will also have to be taken intoconsideration, i.e, conversion kits, largercarburettor fitted etc.
A worn drive belt will slip and cause problems,especially when fitting a part such as an exhaustwhich will enhance performance. A worn drive beltalso lowers gearing slightly and create themisinterpretation that the exhaust is down onperformance. A worn clutch that did not slippreviously, can begin to slip because of an increasein performance. Scooters that have rev limitersfitted, may not achieve the full potential powerincrease of a new exhaust.
Certain exhausts come with rollers, but assumingthat fitting the rollers supplied are correct, cansometimes be misleading. For example :- oneparticular exhaust supplied by Tecnigas may fitseveral machines. Please check that the rollersenclosed are for the machine concerned. Certainexhausts have a conical restrictor in the down pipeto restrict power.
A new exhaust being returned for credit orexchange must be in the original undamaged box,complete with all fittings and instructions.
Only the Warranty Department are authorised tosanction Warranties, therefore the company willnot honour any arrangements directly made withRepresentatives or any other members of thecompany.
Claims under Warranty :- All exhausts must bereturned for our inspection, however please call usfirst.
Returning an exhaust :- A close thoroughinspection is needed to check that there are nodents, grounding marks, scuffs, or filed holes -made into slots, also that the mounting bushes areintact and have been used. If there are signs thatthe exhaust has been loose on the machine, therewill be tell tail signs of polishing on the mountingbrackets. Exhausts coming loose or falling from themachine are not covered by warranty. All exhausts must be returned complete withfittings e.g. mounting bracket etc. Also, you willhave to supply a proof of purchase receipt.
It is also important to note that Sports / Race typeof exhausts that are supplied with a clear lacquerfinish over bare metal. These are sold as a fashionitem to emulate race expansions and should betreated with an aftermarket heat resistant paint.Once the lacquer has burned off, the bare metalexhaust will be exposed to the elements, which willcause the exhaust to deteriorate, unless some formof protection is used. Due to the type of product,its use and location, rust is not covered bywarranty.
If an exhaust is allowed to deteriorate to the pointof disintegration, it is not possible to cover thisunder warranty. A failing exhaust will be moreevident to the owner. Noise level and vibrationwould increase considerably and there would be adistinct difference in power output. It is the ownersresponsibility to report any fault as soon aspossible to the supplying dealer. It is the ownersresponsibility to ensure that any problems with aexhaust are not allowed to escalate to the point theexhaust falls apart. This is not covered by warranty,regardless of mitigating circumstances.
Mufflers / End Cans can be repacked, and as such,after a reasonable period should be considered forsuch action.
Staniforths are proud to be the U.K’s OfficialSole Distributor of Tecnigas Exhausts
TECNIGAS
web
: ww
w.stan
iforth
s.co.u
k| Em
ail: sales@stan
iforth
s.co.u
k2
TECNIGAS QUICK REFERENCE APPLICATION LISTSILENT SILENT Q - TRE GP4 NEXT R NEXT R TREK TREK RS RS ENOX ENOX G - BOX MAXI 4 NEW 4 RACER SILENT EXHAUST
TECNIGAS QUICK REFERENCE APPLICATION LISTSILENT SILENT Q - TRE Q - TRE GP4 NEXT R NEXT R TREK TREK RS RS ENOX ENOX G - BOX MAXI RACER SILENT EXHAUST
PRO SPORT CHROME CHROME CHROME CHROME S/STEEL STEEL 4 125 ROAD GASKETSILENT SILENT Q - TRE GP4 NEXT R NEXT R TREK TREK RS RS ENOX ENOX G - BOX MAXI 4 NEW 4 RACER SILENT EXHAUST
PRO SPORT CHROME CHROME CHROME S/STEEL STEEL MAXI 4 SCOOT 125 ROAD GASKETDouble X 50 TSL55 TSL46R TEG01F409 50 TSL55 TSL46R TEG01Hawk 50 TSL55 TSL46R TEG01Laser 50 TSL55 TSL46R TEG01
Please Note:Technigas Silent Sport carry a 60 day warranty against faulty workmanship. No claim can be entered into against rust forming on this product. The replacement of the variator rollers may be required when fitting a Technigas Exhaust. The fitting of a sports exhaust alone may notnecessarily improve the performance. In some cases Big Bore Kits & up-rated springs etc. may need to be added to improve the performance
A TOUCH OF SPORTS APPEAL FOR THE MOST RADICAL SCOOTERS.
• Steel structure• Silencer in silver aluminium• Low noise level• Maximum performance as a silencer• Resistance and durability• Sports and innovative design• EC homologations available according to directive
PEUGEOTBlaster 50 03.07.25011 TSL79 üBuxy 50 Upto 98 03.07.24111 TSL29 üBuxy ‘98 On 03.07.24211 TSL24 üElyseo 50 03.07.24211 TSL24 üElystar 50 03.07.24211 TSL24 üJet C - Tech 03.07.25011 TSL79 üJet Force 50 03.07.25011 TSL79 üLooxor 50 03.07.24211 TSL24 üLudix 50 03.07.25011 TSL79 üST 50 Rapido 03.07.166 TSL51 ûSpeedake 50 03.07.24111 TSL29 üSpeedfight 50 I 03.07.24211 TSL24 üSpeedfight 50 II 03.07.24211 TSL24 üSpeedfight 50 III (3) 03.07.25011 TSL79 üSquab 50 03.07.24211 TSL24 üTKR 50 03.07.24211 TSL24 üTrekker 50 03.07.24211 TSL24 ü
Listing continues on page 17
OPTIMUM PERFORMANCE WITH MINIMUM NOISE LEVEL.• Steel structure• Low noise level• Maximum performance as a silencer• Resistance and durability• Design very similar to the original• EC homologations available according to directive 97/24/EC
TECN
IGAS
telephone: 0114 2462027 | Fax: 0114 245423217
MODEL TECNIGAS REF STAN REF C.ETweet 50 03.07.753 TSL94 ûZenith 50 Upto 98 03.07.24111 TSL29 üZenith 50 ‘98 On 03.07.24211 TSL24 üV - Click 50 4T 03.07.505 TSL87 ûVivacity 50 03.07.24211 TSL24 üVivacity 50 3 Sportline 2T 03.07.24211 TSL24 üVivacity 50 New Model 03.07.25011 TSL79 üVivacity 25 Km/h 50 03.08.247 TSL57 û
• Steel structure• Low noise level• Maximum performance as a silencer• Resistance and durability• Design very similar to the original• EC homologations available according to directive 97/24/EC
Please Note:Technigas MAXI carry a 60 day warranty against faulty workmanship. No claim can be entered into against rust forming on this product. The replacement of the variator rollers may be required when fitting a Technigas Exhaust. The fitting of a sports exhaust alone may notnecessarily improve the performance. In some cases Big Bore Kits & up-rated springs etc. may need to be added to improve the performance
MODEL TECNIGAS REF STAN REF C.EAPRILIASR Motard 125 033780411 TSLM10 û
DERBIBoulevard 125 033780411 TSLM10 ûSonar 125 033780411 TSLM10 ûVariant Sport 125 033780411 TSLM10 û
SUZUKIBurgman UH 125 02-07 Not Injector Mod 033740021 TSLM21 üBurgman UH 125 i 07> Injector Mod 033740121 TSLM22 üBurgman UH 150 02-07 Not Injector Mod 033740021 TSLM21 üBurgman UH 150 i 07> Injector Mod 033740121 TSLM22 ü
YAMAHAMajesty 250 '96-'00 033730121 TSLM24 ü
Please Note:Technigas NEW MAXI carry a 60 day warranty against faulty workmanship. No claim can be entered into against rust forming on this product. The replacement of the variator rollers may be required when fitting a Technigas Exhaust. The fitting of a sports exhaust alone may notnecessarily improve the performance. In some cases Big Bore Kits & up-rated springs etc. may need to be added to improve the performance
Optimum performance with minimum noise level forthe Maxi Scooters.
• Stainless Steel structure• Low noise level• Maximum performance as a silencer• Resistance and durability• Design very similar to the original• EC homologations available according to directive
97/24/EC
Staniforths are proud to be the U.K’s OfficialSole Distributor of Tecnigas Exhausts
SUZUKIBurgman UH 125 02 On Not Inj Mod 063740011 TSLS07 üBurgman UH 125 i 07 On Inj Mod 063740111 TSLS22 üBurgman UH 150 02 On Not Inj Mod 063740011 TSLS07 üBurgman UH 150 i 07 On Inj Mod 063740111 TSLS22 ü
YAMAHABW's 125 063730411 TSLS25 üX Max 125 063730311 TSLS11 üMajesty 250 '96-'00 063730111 TSLS24 ü
Please Note:Technigas 4 SCOOT carry a 60 day warranty against faulty workmanship. No claim can be entered into against rust forming on this product. The replacement of the variator rollers may be required when fitting a Technigas Exhaust. The fitting of a sports exhaust alone may notnecessarily improve the performance. In some cases Big Bore Kits & up-rated springs etc. may need to be added to improve the performance
Perfect balance between top performance and low noise level with stainlesssteel heart dressed up in aluminium.
• Manufactured in ANSI 304 Stainless Steel• Outer in 6063 Aluminium • Optimised to get the best of every 4 stroke engine
TECN
IGAS
telephone: 0114 2462027 | Fax: 0114 245423221
TECNIGAS RS II & RS II CHROMEMODEL TECNIGAS REF STAN REF CHROME C.EALUNIXAlunix 50 06.10.17511/12 TSL64 ü
TECNIGAS RS II & RS II CHROMEMODEL TECNIGAS REF STAN REF CHROME C.ESUZUKIEstilete 50 06.10.17911 TSL65 üKatana 50 Not Fuel Inj Model 06.10.17911 TSL65 üZillion 50 06.10.17911 TSL65 ü
Please Note:Technigas RS carry a 60 day warranty against faulty workmanship. No claim can be entered into against rust forming on this product. The replacement of the variator rollers may be required when fitting a Technigas Exhaust. The fitting of a sports exhaust alone may notnecessarily improve the performance. In some cases Big Bore Kits & up-rated springs etc. may need to be added to improve the performance
UPRATE CLUTCH SPRINGSClutch Spring Sets + 30% TSLCS
CHROMED CLAMP FOR SILENCERS (END CAN)Chromed 50cc - 70cc TSLSCC
END CANTitanium Aluminium 0000265 TSLST
Please Note:Technigas TREK carry a 60 day warranty against faulty workmanship. No claim can be entered into against rust forming on this product. The replacement of the variator rollers may be required when fitting a Technigas Exhaust. The fitting of a sports exhaust alone may notnecessarily improve the performance. In some cases Big Bore Kits & up-rated springs etc. may need to be added to improve the performance
MODEL TECNIGAS REF STAN REF CHROME C.ETNGLS 50 06.18.37521/2 TSLT03 TSLT03C üSS 50 06.18.37521/2 TSLT03 TSLT03C üVenice 06.18.37521/2 TSLT03 TSLT03C ü
TECNIGAS NEXT R & NEXT R CHROMEMODEL TECNIGAS REF STAN REF CHROME C.ESYMDD 50 06.09.161 TSL09R ûMio 50 06.09.50502 TSL87RC ûOrbit II 50 06.09.50502 TSL87RC ûSimphony 50 06.09.50502 TSL87RC û
TGB101 R 50 06.09.181 TSL46R û101 S 50 06.09.181 TSL46R û202 T 50 06.09.181 TSL46R û203 50 06.09.181 TSL46R û303 RS 50 06.09.181 TSL46R û309 Racing 50 06.09.181 TSL46R ûAkros 50 06.09.181 TSL46R ûBullet 50 06.09.181 TSL46R ûCappuccio 50 4T 06.09.50502 TSL87RC ûDouble X 50 06.09.181 TSL46R ûF409 50 06.09.181 TSL46R ûHawk 50 06.09.181 TSL46R ûLaser 50 06.09.181 TSL46R û
UVMBingo 50 06.09.30011 TSL17R ü
VENTOTriton LI 50 4T 06.09.50502 TSL87RC û
YAMAHABWS / Next Generation 50 06.09.37611/12 TSL07RC üBump 50 06.09.37611/12 TSL07RC üSlider 50 06.09.37611/12 TSL07RC üSpy 50 06.09.37611/12 TSL07RC üTarget 50 06.09.37611/12 TSL07RC üZuma II 50 06.09.37611/12 TSL07RC üJog 90 06.09.380/02 TSL12R TSL12RC ûAerox 100 cc 06.09.380/02 TSL12R TSL12RC ûBWS 100 cc 06.09.380/02 TSL12R TSL12RC ûNeos 100 cc 06.09.380/02 TSL12R TSL12RC û
REPLACEMENT PARTS STAN REF
UPRATE CLUTCH SPRINGSClutch Spring Sets + 30% 0000120 TSLCS
END CANBlack 0000243 TSLSKBlue 0000246 TSLSBCarbon Look 0000235 TSLSC
NEXT R SUPPORT BRACKETSAvailable for most Next R Exhausts
PERFECT COMBINATION OF HIGH PERFORMANCE AND LOW NOISELEVEL. EXPANSION CHAMBER MADE IN 12/10 MM STEEL FINISHEDWITH BLACK ALUMINIUM CAN OR CHROMED VERSION WITHBLACK ALUMINIUM.
• High class Tecnigas racing scooter line• Steel structure with the cone contracone principle• Silencer in anodised black alluminium of high quality• Chrome option with anodised blue Silencer• Low noise level• Maximum performance• Resistance and durability, enhanced with chrome option• Hand-crafted design• EC homologations available according to 97/24/EC directive
Please Note:Technigas NEXT R carry a 60 day warranty against faulty workmanship. No claim can be entered into against rust forming on this product. The replacement of the variator rollers may be required when fitting a Technigas Exhaust. The fitting of a sports exhaust alone may notnecessarily improve the performance. In some cases Big Bore Kits & up-rated springs etc. may need to be added to improve the performance
Please Note:Technigas Q-TRE carry a 60 day warranty against faulty workmanship. No claim can be entered into against rust forming on this product. The replacement of the variator rollers may be required when fitting a Technigas Exhaust. The fitting of a sports exhaust alone may notnecessarily improve the performance. In some cases Big Bore Kits & up-rated springs etc. may need to be added to improve the performance
• Racing Look• Manufactured in steel structure• High quality finish in nickel• Homologated according to Directive 97/24EC
Please Note:Technigas GP4 carry a 60 day warranty against faulty workmanship. No claim can be entered into against rust forming on this product. The replacement of the variator rollers may be required when fitting a Technigas Exhaust. The fitting of a sports exhaust alone may notnecessarily improve the performance. In some cases Big Bore Kits & up-rated springs etc. may need to be added to improve the performance
YAMAHADT 50 04 On 061687027 TSLGB03 üTZR 50 061683027 TSLGB01 ü
EXCLUSIVE CRAFTWORK AND DESIGN WITH OPTIMAL CALCULATION OF THEEXPANSION CHAMBER & VENTURI SYSTEMS FOR ABSOLUTE PERFORMANCE.
• Tecnigas moped scooter line• AP04 Steel structure with the cone contracone principle and completely
handmade welding• Sound insulation through a resonating chamber system together with a
bioxil compositum to reach maximum sound isolation.• Silencer in anodised titanium aluminium• High performance• Resistance and durability• Racing and hand-crafted design• EC homologations available according to directive 97/24/EC
Please Note:Technigas E-BOX carry a 60 day warranty against faulty workmanship. No claim can be entered into against rust forming on this product. The replacement of the variator rollers may be required when fitting a Technigas Exhaust. The fitting of a sports exhaust alone may notnecessarily improve the performance. In some cases Big Bore Kits & up-rated springs etc. may need to be added to improve the performance
TECN
IGAS
telephone: 0114 2462027 | Fax: 0114 245423231
MODEL TECNIGAS REF STAN REF C.EAPRILIAMX 50 06.12.50006 TSLEN01 ûRX 50 96 - 05 06.12.50006 TSLEN01 ûRX 50 '05 On 06.12.53016 TSLEN02 üSX 50 06.12.53016 TSLEN02 ü
CPISM 50 06.12.55006 TSLEN05 ûSX 50 06.12.55006 TSLEN05 û
DERBISenda 50 '00 On 06.12.53016 TSLEN02 üSenda DRD Evo 50 06.12.53016 TSLEN02 üSenda R DRD 50 06.12.53016 TSLEN02 üSenda Racer 50 06.12.53016 TSLEN02 üSenda X - Racer 50 06.12.53016 TSLEN02 üSenda X - Treme 50 06.12.53016 TSLEN02 ü
GILERARCR 50 06.12.53016 TSLEN02 üSMT 50 06.12.53016 TSLEN02 ü
MALAGUTIXSM 50 06.12.54116 TSLEN04 üXTM 50 06.12.54116 TSLEN04 ü
MBKX - Limit 50 06.12.54116 TSLEN04 ü
MOTOR HISPANIAFuria 50 06.12.54016 TSLEN03 üRYZ 50 06.12.54116 TSLEN04 ü
PEUGEOTXP 6 50 06.12.54016 TSLEN03 üXPS 50 06.12.54116 TSLEN04 ü
THE BEST CHOICE FOR THE MOST RADICAL OFF-ROADMOPEDS FULLY HANDMADE IN STAINLESS STEEL.
• New Tecnigas off-road line• Stainless steel structure• Its structure perfectly fits the dimensions from the
racing off-road vehicles• Silencer in Titanium Aluminium following the standards
of the off-road vehicle design• Notable improvement in performance• Extra durability thanks to the resistance of the main
material, stainless steel• EC homologations available according to 97/24/EC
directive
REPLACEMENT PARTS STAN REF
END CANBlack 0000221 TSLENC
The following E-Nox exhausts are nowavailable in Steel, which are cheaper thanthe Stainless Steel version
TSLEN02 TSLEN02STSLEN03 TSLEN03STSLEN04 TSLEN04S
Please Note:Technigas E-NOX carry a 60 day warranty against faulty workmanship. No claim can be entered into against rust forming on this product. The replacement of the variator rollers may be required when fitting a Technigas Exhaust. The fitting of a sports exhaust alone may notnecessarily improve the performance. In some cases Big Bore Kits & up-rated springs etc. may need to be added to improve the performance
Staniforths are proud to be the U.K’s OfficialSole Distributor of Tecnigas Exhausts
MODEL TECNIGAS REF STAN REF C.EHONDACBR 125 06.141.00 TSLSR01 û
RIEJURS3 06.141.01 TSLSR02 û
OPTIMUM PERFORMANCE WITH MINIMUM NOISE LEVEL
• High-quality Tecnigas 4 Stroke motorcycle line• Light silencer in high quality anodised aluminium• Stainless steel interior structure• Maximum performance as a silencer• Low noise level• Design close to the original
HYDRO FORMED EXHAUST PIPE SYSTEM, DESIGNED FOR COMPETITIONUSE, ESPECIALLY IN MEDIUM AND HIGH REGIME TURNS.
• Tecnigas moped scooter line• Steel structure with the hydro formed technique• Silencer in blue aluminium of high quality• For competition use, effective in high regime turns• Racing and competition look
Please Note:Technigas SILENT ROAD carry a 60 day warranty against faulty workmanship. No claim can be entered into against rust forming on this product. The replacement of the variator rollers may be required when fitting a Technigas Exhaust. The fitting of a sports exhaust alone may notnecessarily improve the performance. In some cases Big Bore Kits & up-rated springs etc. may need to be added to improve the performance
Please Note:Technigas RACER 125 carry a 60 day warranty against faulty workmanship. No claim can be entered into against rust forming on this product. The replacement of the variator rollers may be required when fitting a Technigas Exhaust. The fitting of a sports exhaust alone may notnecessarily improve the performance. In some cases Big Bore Kits & up-rated springs etc. may need to be added to improve the performance
MODEL TECNIGAS REF STAN REF C.EAPRILIARS 125 Extreme '00 06.13.700 TSL74 ûRS 125 Extreme '03 06.13.701 TSL75 û