iHip Fold-up Portable Speaker LINE IN ADAPTER Replacement€¦ · iHip Fold-up Portable Speaker LINE IN ADAPTER Replacement If the device has a LINE IN Adapter that is not functioning
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
iHip Fold-up Portable Speaker LINE INADAPTER Replacement
If the device has a LINE IN Adapter that is not functioning properly, replace it using this guide.
Written By: Amanda
iHip Fold-up Portable Speaker LINE IN ADAPTER Replacement Draft: 2015-01-11Guide ID: 32113 -
This document was generated on 2019-10-15 03:33:49 AM (MST).
To reassemble your device, follow these instructions in reverse order.
Step 7 — Assembling the New Adapter
Position the newly purchased LINEIN adapter and wires in place
Using a soldering iron and solderingwire, reattach the red and blackwires that extend from themotherboard to their original positionon the LINE IN adapter
Use the soldering iron and solderingwire again to reattach the black andblue wires that extend from thebattery case to their original positionon the LINE IN adapter
The blue wire should attach onthe bottom of the battery caseand the black wire on the topinsertion.
The new LINE IN adapter shouldnow be properly assembled in placewith the wires connected to theirproper location.
iHip Fold-up Portable Speaker LINE IN ADAPTER Replacement Draft: 2015-01-11Guide ID: 32113 -
This document was generated on 2019-10-15 03:33:49 AM (MST).