The IHC Beaver® 300 SE is an extremely successful
tried-and-testedvessel. The dredger is dismountable and can be
easily transportedto any locati on. With its robust design, it is
the preferred choice inits class due to low maintenance, excellent
fuel consumpti on andhigh producti vity levels. The key features
include:• effi ciency and high performance (net available power on
the
dredging installati on per installed power) due to the pump,
gearbox and fresh-water engine cooling system
• transportable in only three containers• engine mounted in the
centre pontoon for protecti on
and low noise levels• durable heavy-duty marine engine• safe and
robust pump drive.
IHC Beaver® 300 SE Cutt er sucti on dredger
Reliable and effi cientThe IHC Beaver® is well known for its
robust constructi on, reliableoperati on and excellent performance.
To date, Royal IHC has supplied more than 800 of these standard
cutt er sucti on dredgersworldwide.
Transportable and deliverable from stockIHC Beaver® dredgers can
be dismantled for transport via road,rail or sea. A wide range of
opti onal equipment is available, aswell as complementary auxiliary
equipment, such as work boats and discharge pipelines. These
vessels are mostly delivered from stock.
Service and supportIHC can provide a complete package of spare
parts, maintenance support, equipment training programmes, dredging
advisory services and dredge operators for hands-on instructi on
and commissioning.
Main parametersDredging depth 6mDischarge diameter 260mm (larger
diameters opti onal)Total power 287kW
PU 2
5B-6
IHC Beaver® 300 SE
Dimensions Length overall (ladder raised) 15.75mLength over
pontoons, approx. 12mBreadth 4.3mDepth 1.3mMain pontoon 7.0 x 2.2 x
1.3mMean draught with full bunkers, approx. 0.88mMaximum standard
dredging depth 6m
260mm 260 mm
Discharge pipe diameter 260 mm
Dredge pump Type IHC-600-150-240
267kW (358hp)
Diesel engine Caterpillar C12 TA Acert 287kW@1,800rpm
206g/kWhr
Voltage 24V DC
200Ah
Type
30kW (40hp)Diameter 830mmMaximum speed, approx. 35rpm
150kN
Extending force (at 0.82m/min) 60kN
Swing winches 25kN
Maximum line speed, approx. 22m/minWire diameter 12mmDrum
diameter 322mmThe two swing winches have independent hydraulic
drives,75m wires and 160kg anchors
Spuds Length, approx. 8.6mDiameter 324mmWeight, approx.
960kg
Force 42kNRam stroke 1.6m
2.5m
Swing width with 35° swing each side At maximum dredging depth
14.5mAt minimum dredging depth 18.0m
Deck crane 7.5kN
Outreach 1.6m
Tools
diesel engine.
Other features• • spare parts available from stock• fresh-water
engine cooling system• dredge pump driven through integrated
bearing block, clutch and
•
• reliable hydraulic system• • dismountable and transportable by
road, rail or sea• easy and fast assembly and dismantling• • •
white iron-wear parts for the dredge pump• •
work boats, boosters and pipelines).
• non-return valve• increased discharge pipeline diameter•
increased dredging depth• life-cycle support packages (including
training, technical support, etc.)•
Pum
p ou
tput
in m
3 of i
n si
tu so
lids
Discharge length in meters
1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,0000
50
100
150
200
250
ABCDE
IHC Holland BV
P.O. Box 204, 3360 AE SliedrechtMolendijk 94, 3361 EP
SliedrechtThe Netherlands T +31 184 41 15 55
[email protected]
Output calculated for:
Soil type Decisive grain size Situ densityA Fine sand 100µm
1,900kg/m3B Medium sand 235µm 1,950kg/m3C Coarse sand 440µm
2,000kg/m3D Coarse sand and gravel 1.3mm 2,100kg/m3E Gravel 7mm
2,200kg/m3
NoteCalculated output curves only indicate pumping capacity,
based on the
these curves.
Internal diameter of discharge line = 300mmDredging depth =
6m