GAS TECHNOLOGY INSTITUTE IH 2® Technology: Preparing for Scale Dr. Pedro Ortiz-Toral 1 , Terry Marker 1 , Dr. Martin Linck 1 , Mike Roberts 1 , Jim Wangerow 1 , Dr. Alan del Paggio 2 , Pat Leung 2 , Dr. Vikrant Urade 3 , Dr. Laszlo Domokos 2 1 Gas Technology Institute, 2 CRI Catalyst Co, 3 Shell Technology Centre Bengaluru TCS 2016
16
Embed
IH Technology: Preparing for Scale · Catalyst partner, oil refinery expertise, exclusive global licensor. Experimental fluidization dynamics, cold flow modeling, solids handling.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
G A S T E C H NO L OG Y I N S T I T U T E
IH2® Technology: Preparing for Scale
Dr. Pedro Ortiz-Toral1, Terry Marker1, Dr. Martin Linck1, Mike Roberts1, Jim Wangerow1,Dr. Alan del Paggio2, Pat Leung2
, Dr. Vikrant Urade3, Dr. Laszlo Domokos2
1Gas Technology Institute, 2CRI Catalyst Co, 3Shell Technology Centre Bengaluru
TCS 2016
Agenda Points
IH2®What is
Technology?Risks and Mitigation Timeline
2
A highly flexible, self-sufficient, continuous catalytic thermo-chemical process invented by Gas Technology Institute and jointly developed with support from USDOE and CRI to which CRI have acquired exclusive license rights.
Uses catalysts, hydrogen and heat in proven refinery hardware to cost effectively1 convert forestry, agricultural and sorted municipal wastes into low-carbon fungible hydrocarbon transportation fuels gasoline, jet and diesel which fully meet relevant ASTM specifications together with char, fertilizer, water and CO2. 11.50-3.50 USD/gallon FPMC; 160-400MM Capex 500 tonne/d standalone - 2000 tonne/d integrated; No RINs, no credits included
Petrol (from wood)• EN 228: Petrol – Jan 2009• RON 87 vs 95• Sulfur ~ 10 ppm
Diesel (from wood)• EN 590:2009+A1:2010• Cetane number 48• Lubricity• Sulfur < 15 ppm
U.S. Product• Drop-in Quality Diesel (R100)
• High Quality Premium RBOB (R90/E10)
EuropeanProduct
• High Quality Blend Stocks
North American Product
European Product
Quality of Jet Fuel from IH2® Process
9
Property Jet A1/JP8 Specification
Upgraded Jet Fuel
Freeze Point, °C, max -47 <-80
Viscosity @20°C (cst), max 8.0 4.6
Copper corrosion, 3 hr @50°C, max 1 1A
Flash Point, °C, min 38 >46
Smoke Point, mm, min 25 (19) 26.6
Aromatics, vol%, max 25 <0.3
Sulfur total, wt%, max 0.3 <0.0002
Sulfur mercaptan, wt%, max 0.002 0.00018
Density, g/mL@15°C, min-max 0.775 – 0.84 0.8374
Naphthalenes, vol%, max 3 <0.3
Hydrogen Content, mass%, min 13.4 13.9
Jet fuel from the IH2® process meets all Jet A1 (and JP8) specifications we have tested so far.
It has the following differentiators Very low sulfur (< 2 ppmw) Low freezing point (below -80°C) No naphthalenes High volumetric energy density Tunable level of aromatics from 0 wt% to 25 wt%
0.02L/dayBangalore
EE 2nd Stage Test
1L/weekBangalore MBU
20L/dayGTI Chicago
IH2-50 Pilot Plantrun ~7000 hours
Prove the Science 2009-2015+
>200,000L/dayIH2-500tpd
Prove the Reliability & Profitability 2020+
2,000L/dayCRI/Shell IH2-5000
Prove the Engineering & Hardware 2017+
Ris
k
Time and Scale
The Progress – Reproducible Over 105
1L/weekGTI Chicago
MBU
10
Risk Reduction Tools• Comprehensive team with science, engineering,
operations, analytical, and modeling experienceExperienced Development Team
• Focus investment on the testing the core technology Leveraged Facility Assets
• Prudent increments in scale and complexity of operations
Disciplined Scale-Up Approach
• Full, detailed characterization of potential operating conditions
Rigorous Technology Testing
• Anchor performance model with quality data Validated Performance Modeling
• Innovate in pilot plant to address deficiencies and opportunities
Process design, process assurance, intellectual property rights, 40 yearscommercial BFB experience and IH2-50 pilot (50kg/d continuous) scale testing.
www.gastechnology.org
Catalyst partner, oil refinery expertise, exclusive global licensor. www.cricatalyst.comExperimental fluidization dynamics, cold flow modeling, solids handling. www.psri.orgExclusive FEED provider for the IH2 process at commercial scale.Supplier of reformer technology for 1000 tonne/day and above.
www.kbr.comSuppliers of wood yard technology and biomass drying/sizing www.andritz.com
www.astecindustries.comExclusive FEED provider for the IH2 process at 5mt/d feed and below. Turnkey provider of Bangalore MBU and EEFB units, GTI IH2-50.
www.zeton.inc
Supplier of reformer technology for 500 tonne/day plants and below www.lindeengineering.com
Hydrocarbon fuel specifications, LCA, qualifications, process safety and designconsiderations, demonstration unit funding site host, operations, etc.
www.shell.comFinancial support. www.energy.gov/eere/Engine testing partner to perform required emissions and engine testing www.swri.orgSolids handling experts, lock hopper designs www.jenike.com
www.thomasandmuller.com
Fuel standards and regulatory agencies. Pathways, emissions guidelines, etc.Consent needed prior to sale of IH2 fuels in US.