(800) TMS-COAX • www.timesmicrowave.com 154 TIMES MICROWAVE SYSTEMS FBT-195 Engineered Products: FBT TM -195 Flexible Low Loss High Power Communications Coax Construction Specifications Description Material In. (mm) Inner Conductor Solid BC 0.037 (0.94) Dielectric Low Density PTFE 0.113 (2.87) Outer Conductor Aluminum Tape 0.119 (3.02) Overall Braid Tinned Copper 0.142 (3.61) Jacket Brown FEP 0.175 (4.45) Mechanical Specifications Performance Property Units US (metric) Bend Radius: installation in. (mm) 0.5 (12.7) Bend Radius: repeated in. (mm) 2 (50.8) Bending Moment ft-lb (N-m) 0.1 (0.14) Weight lb/ft (kg/m) 0.020 (0.03) Tensile Strength lb (kg) 40 (18.2) Flat Plate Crush lb/in. (kg/mm) 10 (0.19) Electrical Specifications Performance Property Units US (metric) Velocity of Propagation % 76 Dielectric Constant NA 1.73 Time Delay nS/ft (nS/m) 1.34 (4.40) Impedance ohms 50 Capacitance pF/ft (pF/m) 26.7 (87.6) Inductance uH/ft (uH/m) 0.067 (0.22) Shielding Effectiveness dB >90 DC Resistance Inner Conductor ohms/1000ft (/km) 7.6 (24.9) Outer Conductor ohms/1000ft (/km) 4.90 (16.1) Voltage Withstand Volts DC 1000 Jacket Spark Volts RMS 3000 Peak Power kW 2.5 Part Description Stock Part Number Application Jacket Color Code FBT-195 Indoor/Outdoor FEP Brown 54165 • FBT TM is an indoor/outdoor highly fire retardant cable intended specifically for runs within and between base station cabinets. It is also applicable for return air handling plenums (e.g., dropped ceilings, raised floors). It has a UL/NEC rating of ‘CL2P’ for plenum applications. • Flexibility and bendability are hallmarks of the FBT cable design. The flexible outer conductor enables the tightest bend radius available for any cable of similar size and performance. • Low Loss is another hallmark feature of FBT. Size for size LMR has the lowest loss of any flexible cable and comparable loss to semirigid hard-line cables. • RF Shielding is 50 dB greater than typical single shielded coax (40 dB). The multi-ply bonded foil outer conductor is rated conservatively at > 90 dB (i.e. >180 dB between two adjacent cables). • Weatherability: FBT cables designed for outdoor exposure incorporate FEP jackets for UV resistance and have life expectancy in excess of 20 years. • Connectors: A wide variety of connectors are available for FBT-195 cable, including all common interface types, reverse polarity, and a choice of solder or non-solder center pins. Most LMR connectors employ crimp outer attachment using standard hex crimp sizes. • Cable Assemblies – All FBT cable types are available as pre-terminated cable assemblies. Refer the section on FlexTech for further details. Ideal for… • High Power Base Station Jumper Assemblies • In-Building Plenum Feeder Runs • Any High Power Low Loss RF cable application Environmental Specifications Performance Property 0 F o C Installation Temperature Range -67/+302 -55/+150 Storage Temperature Range -67/+302 -55/+150 Operating Temperature Range -67/+302 -55/+150
20
Embed
Ideal for… • High Power Base Station Jumper … · Inner Conductor Solid BC 0.040 (1.02) Dielectric Low Density PTFE 0.118 (3.00) Environmental Specifications Outer Conductor0.123(3.12)
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
(800) TMS-COAX • www.timesmicrowave.com154
TIMES MICROWAVE SYSTEMS
FBT-
195
Engineered Products:
FBTTM-195 Flexible Low Loss High Power Communications Coax
Construction Specifications Description Material In. (mm)
Inner Conductor Solid BC 0.037 (0.94) Dielectric Low Density PTFE 0.113 (2.87) Outer Conductor Aluminum Tape 0.119 (3.02) Overall Braid Tinned Copper 0.142 (3.61) Jacket Brown FEP 0.175 (4.45)
Mechanical Specifications Performance Property Units US (metric)
Bend Radius: installation in. (mm) 0.5 (12.7) Bend Radius: repeated in. (mm) 2 (50.8) Bending Moment ft-lb (N-m) 0.1 (0.14) Weight lb/ft (kg/m) 0.020 (0.03) Tensile Strength lb (kg) 40 (18.2) Flat Plate Crush lb/in. (kg/mm) 10 (0.19)
Electrical Specifications Performance Property Units US (metric)
Velocity of Propagation % 76 Dielectric Constant NA 1.73 Time Delay nS/ft (nS/m) 1.34 (4.40) Impedance ohms 50 Capacitance pF/ft (pF/m) 26.7 (87.6) Inductance uH/ft (uH/m) 0.067 (0.22) Shielding Effectiveness dB >90 DC Resistance Inner Conductor ohms/1000ft (/km) 7.6 (24.9) Outer Conductor ohms/1000ft (/km) 4.90 (16.1) Voltage Withstand Volts DC 1000 Jacket Spark Volts RMS 3000 Peak Power kW 2.5
Part Description Stock Part Number Application Jacket Color Code FBT-195 Indoor/Outdoor FEP Brown 54165
• FBTTM is an indoor/outdoor highly fire retardant cable intended specifically for runs within and between base station cabinets. It is also applicable for return air handling plenums (e.g., dropped ceilings, raised floors). It has a UL/NEC rating of ‘CL2P’ for plenum applications. • Flexibility and bendability are hallmarks of the FBT cable design. The flexible outer conductor enables the tightest bend radius available for any cable of similar size and performance.• Low Loss is another hallmark feature of FBT. Size for size LMR has the lowest loss of any flexible cable and comparable loss to semirigid hard-line cables.• RF Shielding is 50 dB greater than typical single shielded coax (40 dB). The multi-ply bonded foil outer conductor is rated conservatively at > 90 dB (i.e. >180 dB between two adjacent cables). • Weatherability: FBT cables designed for outdoor exposure incorporate FEP jackets for UV resistance and have life expectancy in excess of 20 years.• Connectors: A wide variety of connectors are available for FBT-195 cable, including all common interface types, reverse polarity, and a choice of solder or non-solder center pins. Most LMR connectors employ crimp outer attachment using standard hex crimp sizes.• Cable Assemblies – All FBT cable types are available as pre-terminated cable assemblies. Refer the section on FlexTech for further details.
Ideal for… • High Power Base Station Jumper Assemblies • In-Building Plenum Feeder Runs • Any High Power Low Loss RF cable application
Environmental Specifications Performance Property 0F oC Installation Temperature Range -67/+302 -55/+150 Storage Temperature Range -67/+302 -55/+150 Operating Temperature Range -67/+302 -55/+150
(800) TMS-COAX • www.timesmicrowave.com 155
TIMES MICROWAVE SYSTEMS
FBT-
195
Attenuation vs. Frequency (typical)A
tten
uat
ion
(db
per
100
fee
t)
100.0
10.0
1.0
10 100 1,000 10,000
Connectors Inner Outer Finish* Part Stock VSWR** Coupling Contact Contact Body Length Width Weight Interface Description Number Code Freq. (GHz) Nut Attach Attach /Pin in (mm) in (mm) lb (g)
1. N Male Straight Plug TC-195-NM 3190-1555 <1.25:1 (2.5) Knurl Solder Crimp S/G 1.5 (38.1) 0.75 (19.1) 0.073 (33.1)
2. SMA Male Straight Plug TC-195-SM 3190-1553 <1.25:1 (2.5) Hex Solder Crimp SS/G 1.0 (25.4) 0.32 (8.1) 0.015 (6.8)
Engineered Products:FBTTM-200 Flexible Low Loss High Power Communications Coax
Construction Specifications Description Material In. (mm)
Inner Conductor Solid BC 0.040 (1.02) Dielectric Low Density PTFE 0.118 (3.00) Outer Conductor Aluminum Tape 0.123 (3.12) Overall Braid Tinned Copper 0.146 (3.71) Jacket Brown FEP 0.175 (4.45)
Mechanical Specifications Performance Property Units US (metric)
Bend Radius: installation in. (mm) 0.5 (12.7) Bend Radius: repeated in. (mm) 2 (50.8) Bending Moment ft-lb (N-m) 0.2 (0.27) Weight lb/ft (kg/m) 0.032 (0.05) Tensile Strength lb (kg) 30 (13.6) Flat Plate Crush lb/in. (kg/mm) 65 (1.169)
Electrical Specifications Performance Property Units US (metric)
Velocity of Propagation % 76 Dielectric Constant NA 1.73 Time Delay nS/ft (nS/m) 1.34 (4.40) Impedance ohms 50 Capacitance pF/ft (pF/m) 26.7 (87.6) Inductance uH/ft (uH/m) 0.067 (0.22) Shielding Effectiveness dB >90 DC Resistance Inner Conductor ohms/1000ft (/km) 6.50 (21.3) Outer Conductor ohms/1000ft (/km) 4.90 (16.1) Voltage Withstand Volts DC 1000 Jacket Spark Volts RMS 3000 Peak Power kW 2.5
Part Description Stock Part Number Application Jacket Color Code FBT-200 Indoor/Outdoor FEP Brown 54166
Ideal for… • High Power Base Station Jumper Assemblies • In-Building Plenum Feeder Runs • Any High Power Low Loss RF cable application
FBT-
200
Environmental Specifications Performance Property 0F oC Installation Temperature Range -67/+302 -55/+150 Storage Temperature Range -67/+302 -55/+150 Operating Temperature Range -67/+302 -55/+150
(800) TMS-COAX • www.timesmicrowave.com 157
TIMES MICROWAVE SYSTEMS
FBT-
200
Attenuation vs. Frequency (typical)
Att
enu
atio
n(d
b p
er 1
00 f
eet)
100.0
10.0
1.0 10 100 1,000 10,000
TC-200-BM3190-225
1 2 3 4
5 6 7 8
TC-200-MUHF3190-444
TC-200-NM3190-224
TC-200-NM-RP3190-959
TC-200-SM3190-612
TC-200-SM-RP3190-327
TC-200-TMC3190-240
TC-200-TF3190-263
Frequency (MHz)
Connectors Inner Outer Finish* Part Stock VSWR ** Coupling Contact Contact Body Length Width Weight Interface Description Number Code Freq. (GHz) Nut Attach Attach /Pin in (mm) in (mm) lb (g)
Engineered Products:FBTTM-240 Flexible Low Loss High Power Communications Coax
Construction Specifications Description Material In. (mm)
Inner Conductor Solid BC 0.051 (1.30) Dielectric Low Density PTFE 0.150 (3.81) Outer Conductor Aluminum Tape 0.155 (3.94) Overall Braid Tinned Copper 0.178 (4.52) Jacket Brown FEP 0.205 (5.21)
Environmental Specifications Performance Property 0F oC Installation Temperature Range -67/+302 -55/+150 Storage Temperature Range -67/+302 -55/+150 Operating Temperature Range -67/+302 -55/+150
Electrical Specifications Performance Property Units US (metric)
Velocity of Propagation % 76 Dielectric Constant NA 1.73 Time Delay nS/ft (nS/m) 1.34 (4.40) Impedance ohms 50 Capacitance pF/ft (pF/m) 26.7 (87.6) Inductance uH/ft (uH/m) 0.067 (0.22) Shielding Effectiveness dB >90 DC Resistance Inner Conductor ohms/1000ft (/km) 4.00 (13.1) Outer Conductor ohms/1000ft (/km) 3.90 (12.8) Voltage Withstand Volts DC 1500 Jacket Spark Volts RMS 5000 Peak Power kW 5.6
Part Description Stock Part Number Application Jacket Color Code FBT-240 Indoor/Outdoor FEP Brown 54167
Ideal for… • High Power Base Station Jumper Assemblies • In-Building Plenum Feeder Runs • Any High Power Low Loss RF cable application
FBT-
240
Mechanical Specifications Performance Property Units US (metric)
Bend Radius: installation in. (mm) 1.0 (25.4) Bend Radius: repeated in. (mm) 2 (50.8) Bending Moment ft-lb (N-m) 0.25 (0.34) Weight lb/ft (kg/m) 0.040 (0.06) Tensile Strength lb (kg) 60 (27.2) Flat Plate Crush lb/in. (kg/mm) 85 (1.52)
(800) TMS-COAX • www.timesmicrowave.com 159
TIMES MICROWAVE SYSTEMS
Attenuation vs. Frequency (typical)
Att
enu
atio
n(d
b p
er 1
00 f
eet)
100
10
1
Frequency (MHz) 10 100 1,000 10,000
FBT-
240
Calculate Attenuation = (0.248515) • FMHz + (0.000183) • FMHz (interactive calculator available at http://www.timesmicrowave.com/cable_calculators)
Attenuation: VSWR=1.0 ; Ambient = +25°C (77°F)
Power: VSWR=1.0; Ambient = +40°C; Inner Conductor = 100°C (212°F); Sea Level; dry air; atmospheric pressure; no solar loading
11. TNC Male Right Angle TC-240-TM-RA 3190-604 <1.35:1 (2.5) Knurl Solder Crimp N/G 1.3 (33) 0.57 (14.5) 0.055 (24.9)
12. Type F Male Straight Plug TC-240-FM-X 3190-2891 <.25:1 (2.5) Knurl Solder Crimp N/G 1.1 (28) 0.45 (11.4) 0.014 (6.4)
1
8
11 12109
765
432
(800) TMS-COAX • www.timesmicrowave.com 161
TIMES MICROWAVE SYSTEMS
Part Stock Type Number Code Description
Ground Kit GK-S240TT GK-S240TT Standard Ground Kit (each)
Hardware Accessories
FBT-
240
GK-S240TT
CT-240/200/195/1003190-667
DBT-U3190-001
Install Tools Part Stock Type Number Code Description Crimp Tool CT-240/200/195/100 3190-667 Crimp tool for LMR-100, 195, 200 and 240 connectors Deburr Tool DBT-U 3192-001 Removes center conductor rough edges Cutting Tool CCT-02 3192-165 Cable and flush cut tool Replacement Blade RB-02 3192-166 Replacement blade for cutting tool
CCT-023192-165
(800) TMS-COAX • www.timesmicrowave.com162
TIMES MICROWAVE SYSTEMS
Engineered Products:FBT -300 Flexible Low Loss High Power Communications Coax
Construction Specifications Description Material In. (mm)
Inner Conductor Solid BC 0.063 (1.60) Dielectric Low Density PTFE 0.190 (4.83) Outer Conductor Aluminum Tape 0.196 (4.98) Overall Braid Tinned Copper 0.225 (5.72) Jacket Brown FEP 0.260 (6.60)
Mechanical Specifications Performance Property Units US (metric)
Bend Radius: installation in. (mm) 1.3 (31.8) Bend Radius: repeated in. (mm) 3 (76.2) Bending Moment ft-lb (N-m) 0.38 (0.52) Weight lb/ft (kg/m) 0.065 (0.10) Tensile Strength lb (kg) 120 (54.52) Flat Plate Crush lb/in. (kg/mm) 30 (0.54)
Electrical Specifications Performance Property Units US (metric)
Velocity of Propagation % 76 Dielectric Constant NA 1.73 Time Delay nS/ft (nS/m) 1.34 (4.40) Impedance ohms 50 Capacitance pF/ft (pF/m) 26.7 (87.6) Inductance uH/ft (uH/m) 0.067 (0.22) Shielding Effectiveness dB >90 DC Resistance Inner Conductor ohms/1000ft (/km) 2.61 (8.6) Outer Conductor ohms/1000ft (/km) 2.21 (7.3) Voltage Withstand Volts DC 2000 Jacket Spark Volts RMS 5000 Peak Power kW 10
Part Description Stock Part Number Application Jacket Color Code FBT-300 Indoor/Outdoor FEP Brown 54168
Ideal for… • High Power Base Station Jumper Assemblies • In-Building Plenum Feeder Runs • Any High Power Low Loss RF cable application
FBT-
300
Environmental Specifications Performance Property 0F oC Installation Temperature Range -67/+302 -55/+150 Storage Temperature Range -67/+302 -55/+150 Operating Temperature Range -67/+302 -55/+150
(800) TMS-COAX • www.timesmicrowave.com 163
TIMES MICROWAVE SYSTEMS
Attenuation vs. Frequency (typical)A
tten
uat
ion
(db
per
100
fee
t)
100.0
10.0
1.0
10 100 1,000 10,000 Frequency (MHz)
FBT-
300
Connectors Inner Outer Finish* Part Stock VSWR ** Coupling Contact Contact Body Length Width Weight Interface Description Number Code Freq. (GHz) Nut Attach Attach /Pin in (mm) in (mm) lb (g)
1. SMA Male Straight Plug TC-300-SM 3190-501 <1.25:1 (2.5) Hex Solder Crimp SS/G 1.0 (25) 0.35 (8.9) 0.018 (8.2)
2. SMA Female Bulkhead Jack TC-300-SF-BH 3190-590 <1.25:1 (2.5) NA Solder Crimp SS/G 1.1 (28) 0.31 (7.9) 0.022 (10.0)
3. TNC Male Straight Plug TC-300-TM 3190-500 <1.25:1 (2.5) Knurl Solder Crimp N/S 1.7 (43) 0.59 (15.0) 0.050 (22.7) * Finish metals: N=Nickel, S=Silver, G=Gold, SS=Stainless Steel, A=Alballoy **VSWR spec based on 3 foot cable with a connector pair
321
TC-300-TM3190-500
TC-300-SM3190-501
TC-300-SF-BH3190-590
Hardware Accessories Type Part Number Stock Code Description Ground Kit GK-S300TT GK-S300TT Standard Ground Kit (each)
GK-S300TT
DBT-U3192-001Install Tools
Type Part Number Stock Code Description
Crimp Tool CT-400/300 3190-666 Crimp tool for LMR 300 connectors Deburr Tool DBT-U 3192-001 Removes center conductor rough edges Cutting Tool CCT-02 3192-165 Cable end flush cut tool Replacement Blade RB-02 3192-166 Replacement blade for cutting tool
Engineered Products:FBTTM-400 Flexible Low Loss High Power Communications Coax
Environmental Specifications Performance Property 0F oC Installation Temperature Range -67/+302 -55/+150 Storage Temperature Range -67/+302 -55/+150 Operating Temperature Range -67/+302 -55/+150 Mechanical Specifications
Performance Property Units US (metric)
Bend Radius: installation in. (mm) 1.8 (44.5) Bend Radius: repeated in. (mm) 4 (101.6) Bending Moment ft-lb (N-m) 1 (1.36) Weight lb/ft (kg/m) 0.104 (0.15) Tensile Strength lb (kg) 120 (54.5) Flat Plate Crush lb/in. (kg/mm) 185 (3.31)
Electrical Specifications Performance Property Units US (metric)
Velocity of Propagation % 76 Dielectric Constant NA 1.73 Time Delay nS/ft (nS/m) 1.34 (4.40) Impedance ohms 50 Capacitance pF/ft (pF/m) 26.7 (87.6) Inductance uH/ft (uH/m) 0.067 (0.22) Shielding Effectiveness dB >90 DC Resistance Inner Conductor ohms/1000ft (/km) 1.80 (5.9) Outer Conductor ohms/1000ft (/km) 1.65 (5.4) Voltage Withstand Volts DC 2500 Jacket Spark Volts RMS 8000 Peak Power kW 16
Part Description Stock Part Number Application Jacket Color Code FBT-400 Indoor/Outdoor FEP Brown 54171
Ideal for… • High Power Base Station Jumper Assemblies • In-Building Plenum Feeder Runs • Any High Power Low Loss RF cable application
Construction Specifications Description Material In. (mm)