ICST 2011 Interconnecting ZigBee and 6LoWPAN Wireless Sensor Networks for Smart Grid Applications Advisor: Quincy Wu Speaker: Chia-Wen Lu National Chi.

ICST 2011Interconnecting ZigBee and 6LoWPAN

Wireless Sensor Networks for Smart Grid Applications

Advisor: Quincy Wu Speaker: Chia-Wen Lu

National Chi Nan UniversityTaiwan

Date: 2011/11/30

1

Internet of Things (IoT) Smart Grid ZigBee/6LoWPAN Problem Network management-SIP System architecture Conclusion and future work

2

Outline

Internet of Things(IoT)

3

Core Internet

Fringe Internet

IoT

00000

01245012

Smart Metering

Industrial Automation

Transportation

Personal Sensors

HomeAutomation

The Figure from: http://6lowpan.net/

In large-scale IoT deployment there will be rich combination of sensors and intelligent management schemes. Wireless sensor networks (WSNs) play a very

important role in IoT.

WSNs are adopted in many applications. This paper focus on the application of Smart Grid.

IoT(cont.)

4

Smart Grid

00000

01245012 meter

aggregation point (translator)

utility system

Internet

ZigBee

The Figure from: Li-Wen Chen, “ZigBee/TCPIP Translators in Smart Grid”, ICET2011

5

IPNetwork

IEEE 802.15.4 was proposed for wireless personal area network communication. Physical layer and data link layer Characteristics: short distance transmission, low

power consumption, low cost

ZigBee Based on IEEE 802.15.4 Network layer and application layer

6

ZigBee

Local network and InternetZigBee devices can communication to each

other.ZigBee devices can not directly communicate

with servers on the Internet.An additional mechanism is required to

translate ZigBee to TCP/IP. It would be better if have protocol can speak

with TCP/IP without translation.

ZigBee (cont.)

7

6LoWPAN （ IPv6 over Low-Power Wireless Personal Area Networks） Based on IEEE 802.15.4 Network layer – IPv6

Compatible with Internet Do not need additional protocol translation.

6LoWPAN

8

ZigBee/6LoWPAN

9

ZigBee NWK

ZigBee APS

Hybrid Smart Grid system architecture

10

ZigBee

6LoWPAN

There is still no universal network management protocol standard to manage two different types of ZigBee and 6LoWPAN devices.

This paper proposed using SIP(Session Initiation Protocol ) as the application layer protocol to manage ZigBee and 6LoWPAN WSNs.

11

Problem

Signaling protocol Point to point Multiple points

Applications Voice over Internet Protocol(VoIP) Instant Message Network Management

Network management-SIP

12

ZigBee-based Smart Grid system architecture

14

6LoWPAN-based Smart Grid system architecture

15

Hybrid Smart Grid system architecture

16

SIP network management module

17

Subscribe / Notify

Instant Message

Subscribe and Notify Module

18

Servers can subscribe data which it wants to monitor from end devices.

Example:Electricity consumption Temperature of meter

Instant Message Module

19

Servers can send commands to devices.

Example:Shutting down or

starting devicesChanging devices

settings

This paper compared the communication protocols between a utility system and smart meters, and suggested how network management applications can be carried on these protocols.

Two major network management protocols: SNMP(Simple Network Management Protocol)and SIP.

20

Conclusion and future work

Empirically comparing SNMP and SIP, especially analyzing the transmission performance and the system resources consumption on a device.

This would allow administrators to manage

a smart grid with the best management protocol.

Conclusion and future work (cont.)

21

22

Thanks for your attention.