icostu design icostu design - butech...application of 1 layer of primer-stuk C, 2 layers of base-stuk C + de-cor-stuk C, 2 layers of fine-stuk C + decor-stuk C, 1 layer of sealer-stuk

micro-stuk design

butech building technologies, S.A.Carretera Villarreal - Puebla de Arenoso (cv-20) km 2,5 - 12540 Villarreal - Castellón - España.

Apartado de correos: 297 - Teléfono (+34) 964 53 62 00 - Fax (+34) 964 53 00 34 - [email protected] - http://www.butech.es

primer-stuk C

base-stuk C

decor-stuk C

fine-stuk C

sealer-stuk C

protec-stuk C Component A + B

primer-stuk C is an acrylic copolymer-based aqueous emulsion used to improve micro-stuk adhesion on any type of construction surface. Increases base cohesion. Improves application of the first base-stuk C layer. Increases resistance to cracking. Alkaline pH resistant.

base-stuk C is a levelling, cement-based micro mortar, with controlled grain size aggregate and latest generation synthetic resin, to establish a base for installation of the micro-stuk system. Interior and exterior use.

decor-stuk is a coloured, acrylic copolymer-based liquid used for mixing with both base-stuk C and fine-stuk C. Provides outstanding adhesion and mechanical strength. Increases impermeability, du-rability and resistance to cracking. Excellent resistance to chemicals and environmental agents. decor-stuk C incorporates colour, thus avoiding the need to add dyes or colourants, which facilitates mixing, colour consistency and micro-stuk uniform finish.

fine-stuk C is a cement, controlled grain size, special resin-based decorative cladding. Due to its ex-cellent performance, beautiful continuous surfaces can be created with minimum thickness. Inte-rior or exterior use.

sealer-stuk C is an acrylic resin-based, highly water and weather-resistant sealer, specially recom-mended for micro-stuk cladding. It protects the micro cement, enhances aesthetic finish and in-creases resistance to abrasion.

protec-stuk C is a water and weather-resistant, impermeable two-component polyurethane cladding. Specially recommended as a final finish on micro-stuk cladding. It protects and enhances the aes-thetic finish, increases resistance to moisture and abrasion, and facilitates ease of cleaning.

micro-stuk design

1

5

6

2 3+

3 4+

Moka Beige White Grey Cement

primer-stuk C Mesh base-stuk C fine-stuk C sealer-stuk C protec-stuk CInterior concrete 1 1 2 - 3 2 1 2Cement rendered interior 1 1 2 - 3 2 1 2Plaster 1 2 2 1 2Brick or cellular concrete interior walls 1 1 3 2 1 2Plaster panels 1 2 2 1 2Wooden panels 1 2 2 1 2Fibre cement panels 1 x 3 1 2Concept XPS panels 1 1 2 2 1 2Existing ceramic covering 1 1 2 - 3 2 1 - 2 2 - 3Glass mosaic covering 1 1 2 2 1 - 2 2 - 3Natural stone covering 1 1 2 - 3 2 1 2Metal surfaces 1 2 2 1 2

Exterior concrete 1 1 2 - 3 2 2 3Cement rendered exterior 1 1 2 2 2 3

micro-stuk designmicro-stuk designmicro-stuk design

Current architecture demands new construction solutions for decor, interior design and refurbishment. To meet this require-ment, PORCELANOSA Grupo has introduced a wide variety of materials which complement PORCELANOSA wall and floor tiling including: L’ANTIC COLONIAL mosaics, wood and natural stone, URBATEK technical porcelain tiles and XLIGHT, System-Pool KRI-ON and now butech micro-stuk continuous cladding.

The butech microcement is a type of fine cement rendering that modified with high strength and durability polymers, becomes an outstanding and stylish covering, fine and tough at the same time. butech microcement represents the best example of the chemical and technologic evolution, using the traditional clinker of the cement production and adding it other products that transform chemically the cement and make it a thinner product with extreme hardness and great flexibility. This way, we obtain a covering without joints that does not fissures and whose strength and hardness are way above of the traditional cement.

Recommended uses:

- Indoor dry and wet room walls.- Shower cabins.- Worktops and furniture covering.- Exterior façades.

Main characteristics:

- Continuous cladding, with no joins. - Total thickness: 2 mm. - May be combined with other types of wall cladding, such as ceramic tiles. - Maintenance-free. - Compatible with most types of construction.- May be laid over other cladding, without the need to remove the existing material.- Reduced waste. - Fire resistant. - Water resistant surface. - Installation cost similar to ceramics.

micro-stuk is supplied in 5m2 kits. Each kit is designed for the application of 1 layer of primer-stuk C, 2 layers of base-stuk C + de-cor-stuk C, 2 layers of fine-stuk C + decor-stuk C, 1 layer of sealer-stuk C, 2 layers of two-component protec-stuk C. Product colour is incor-porated into the decor-stuk C resin.1 primer-stuk C

4 fine-stuk C2 base-stuk C

5 sealer-stuk C3 decor-stuk C

6 protec-stuk C

micro-stuk Substrates

Colour range

Applications

Componentes kit micro-stuk Coverageprimer-stuk C: 0.5 l.

base-stuk C: 10 kg

decor-stuk C: 5 l.

fine-stuk C: 4 kg

sealer-stuk C: 0.5 l.

protec-stuk C: 0.5 l. (5:1)

primer-stuk C: 0,1 l./m2

base-stuk C: 1 kg/m2/coat

fine-stuk C: 0.2 kg/m2/coat

decor-stuk C: For mixture with base-stuk C (litres): 1/3 x kg of powderFor mixture with fine-stuk C (litres): 2/3 x kg of powder

sealer-stuk C: 0,1 l./m2/coat

protec-stuk C: 0,05 l./m2/coat

primer-stuk C Mesh base-stuk C fine-stuk C sealer-stuk C protec-stuk CInterior coverings without presence of moisture 1 2 2 1 2Interior coverings with presence of moisture 1 2 2 2 3Exterior coverings (façades) 1 1 2 2 2 3Shower cubicles 1 1 2 2 2 3Saunas and steam rooms 1 1 2 2 2 3Baths and washbasins 1 2 2 2 3Worktops 1 2 2 2 3Panels and splashbacks 1 1 2 2 1 2Kitchen and bathroom furniture 1 2 2 2 3Urban decoration 1 2 2 2 3

The number represents number of coats. Uneven substrates will require more coats.

The number represents number of coats. Uneven substrates will require more coats.

SUBSTRATE

MESH

Colours are representative only and do not replicate the exact shade of the product. Please consult samples to choose colour.