IcarusPIDV7_3_1-Ref

Piping and InstrumentationDrawings

Version: V7.3.1March 2011Copyright (c) 2001-2011 by Aspen Technology, Inc. All rights reserved.

Aspen Capital Cost Estimator, Aspen Process Economic Analyzer, and the aspen leaf logo are trademarks or registered trademarks of Aspen Technology, Inc.,Burlington, MA.

All other brand and product names are trademarks or registered trademarks of their respective companies.

This manual is intended as a guide to using AspenTech's software. This documentation contains AspenTech proprietary and confidential information and may notbe disclosed, used, or copied without the prior consent of AspenTech or as set forth in the applicable license agreement. Users are solely responsible for theproper use of the software and the application of the results obtained.

Although AspenTech has tested the software and reviewed the documentation, the sole warranty for the software may be found in the applicable licenseagreement between AspenTech and the user. ASPENTECH MAKES NO WARRANTY OR REPRESENTATION, EITHER EXPRESSED OR IMPLIED,WITH RESPECT TO THIS DOCUMENTATION, ITS QUALITY, PERFORMANCE, MERCHANTABILITY, OR FITNESS FOR A PARTICULARPURPOSE.

CorporateAspen Technology, Inc.200 Wheeler RoadBurlington, MA 01803-5501Phone: 781-221-6400Toll Free: 888-996-7100URL: http://www.aspentech.com

Contents

Introduction ............................... VDrawings ....................................1Appendix A: Symbols .............185Appendix B: Abbreviations .....187Index ......................................191

Icarus Piping and Instrumentation Drawings v

Introduction

Note: The drawings represented in the following document aresuperseded by the drawings contained in theAspenTech\Economic Evaluation V7.3.1\Program\Docs\PIDsfolder. Please refer to this location for the latest drawingrevisions. This document should be used solely as a drawingreference for internal volumetric models not depictedelsewhere.This book contains piping and instrumentation drawings(P&IDs) representing Aspen Icarus Volumetric Models.Volumetric Models develop material quantities and are basedon recognized design methods and construction standards.Volumetric Models are the key components behind AspenIcarus unique method of designing and estimating.Volumetric Models determine the field materials (type,quantity, weights, and sizes) required to install an equipmentitem. Volumetric Models generate the material takeoff forequipment handling and setting, piping, civil, structural steel,instrumentation, electrical, insulation and paint materials. For

example, a towers pipe diameter and length is determined bythe diameter, height, pressure, temperature, number of trays,and estimated flow rates. Each run of pipe is consistent withthe tower materials, and of a specific length, diameter,schedule, valve, and fitting count, and so on, to fulfill thefunctionality assigned to that line of pipe. Thus, the VolumetricModels create materials to be installed.P&IDs come in either a standard (STD) or a more fullyinstrumented (FULL) configuration that may be specified at theProject and Area levels. Both the standard and full versions areshown in this book. The 600 series drawings represent the fullversions.

vi Icarus Piping and Instrumentation Drawings

How Project Instrumentation is DevelopedAspen Icarus systems develop the cost of projectinstrumentation based upon the direct costs of materials andmanpower for the following major items:

Primary element hook-up Signal transmission Field/panel hook-up Final element hook-up Control Center Operator Center

Primary Element Hook-UpThe primary element is a field-mounted component with all thenecessary accessories for process connection and signaltransmission to a centrally located field junction box. Forpneumatic systems, it includes all the piping, tubing, fittings,valves, and filter-regulators necessary for connecting theimpulse piping and air supply to the transmitter, and theprocess signal tubing to the field junction box. Aspen Icarussystems group this process signal tubing into one or more fieldjunction boxes. For electronic systems, the system assumes atwo-wire control loop where power for the transmitter is takenfrom a power supply in the Control Center. A 4-20 ma DCsignal is assumed. Aspen Icarus systems calculate material andmanpower costs for fabricating and installing all pipe, valves,and fittings for the impulse piping connection to thetransmitter, and all wiring and electrical fittings to the fieldjunction box. Single or multiple twisted pairs of insulated

stranded copper wire are used for the control system. You mayspecify the type of wiring in the Area date. If IM is selected,the complete control wiring system is costed using control wireand multi-conductor cable. The twisted pair consists ofstranded copper wire with a mylar tape separator and anextruded PVC jacket.Signal TransmissionAt each junction box, the system differentiates betweenControl and Indicating function for grouping into multi-tubebundles to be sent to the Control Building for connection to theback of the control panel. For example, two tubes are requiredfor the transmission signal of a control loop from a junctionbox: one tube for the process transmitter signal to the controland another tube for the control signal from the controller tothe final element, as opposed to an indicating loop that isdeadended at the indicating instrument in the control paneland requires only one tube for signal transmission. Pneumatictransmission tubing is 0.25 INCHES [8 MM] OD, singly orbundled. If the transmission distance between Control Centerand the field junction box exceeds 300 FEET [90 M], thesystem provides a WARNing message. In such an instance,you should consider using an electronic system rather than apneumatic control system to improve dynamic response. Thetype of control system, electronic or pneumatic, is specified inthe Area data.Like pneumatic systems, electronic systems differentiatebetween the different types of instrumentation loops. Forexample, in control loops, two pairs of signal transmission wireare required: one pair for the transmitter signal and the otherpair for the control signal. Both pairs tie-in in the junction box

Icarus Piping and Instrumentation Drawings vii

back of the control panel to the field junction box located in theArea. At the field junction box, the transmission wires arecollected and sent to the control room in multi-conductor cablein conduit or on cable trays. Aspen Icarus systems allow theuser to select three different types of cables for transmission:multi-conductor wire; cable with interlocked armor; and cablepulled in rigid conduit.Field/Panel Hook-UpAspen Icarus systems calculate the material and man-powercost for connecting each tube from the multi-tube bundle to thebulkhead plate in back of the control panel in the main controlbuilding. For an electronic control system, the systemcalculates the cost of material and manpower to connect allsignal wiring to and from the field junction box to the fieldtie-in terminal blocks on the back of the panel.Final Element Hook-UpFor pneumatic systems, system calculates the material andmanpower cost to fabricate and assemble the piping, valves,and fittings required for the air supply and control signal fromthe junction box.Aspen Icarus systems make the same calculations for electronicsystems, with the exception that the control signal is wiredfrom the junction box to an electopneumatic transducermounted on the valve positioner valve.

viii Icarus Piping and Instrumentation Drawings

Analog Control CenterThe cost of the control panel is developed from:

The list of instruments, either electronic, pneumatic, ora combination of these control systems.

The type of display: conventional, semi-graphic, or fullgraphic type.

Aspen Icarus systems assume straight type panels andconventional miniature instruments with an instrument densityof 4.75 per linear foot [15.6 per meter] for conventionaldisplays, 3.75 per linear foot [12.3 per meter] for semi-graphicdisplays, and 2.5 per linear foot [8.2 per meter] for full graphicdisplays. The total number and cost of panel-mountedinstruments is reported apart from the size and cost of thecontrol panel. The cost of the control panel includes thehardware cost of all switches, relays, alarms, power supplies,etc., required for all designated Areas in the facility, It alsoincludes the cost of sheet metal fabrication, piping and/orwiring, and the cost of shipping and installation at the job site.

Local Equipment PanelsAspen Icarus systems calculate the cost of material andmanpower for the fabrication and installation of each localequipment panel and any wiring or pneumatic pipingconnections for alarms, switches, indicators, etc., to the maincontrol panel.

Thermocouple WiringOn temperature control loops where thermocouples are used assensing devices, the transmitter is assumed to be mounted onthe thermocouple head.

Icarus Piping and Instrumentation Drawings ix

Icarus Piping and Instrumentation Drawings 1

DDrawings

The piping and instrumentation drawings that follow are arranged in numeric order. For easy reference, the 600 series drawings, representing fullyinstrumented models, immediately follow the corresponding standard models. For example, Drawing 603 immediately follows Drawing 3.

2 Icarus Piping and Instrumentation Drawings

3 Kettle Reboiler


603Kettle Reboiler


4 Horizontal Pressure Vessel Continuous


604Horizontal Pressure Vessel Continuous


4 Horizontal Jacketed Pressure Vessel - Continuous

Icarus Piping and Instrumentation Drawings

604Horizontal Jacketed Pressure Vesselcketed Pressure Vessel Continuous

7


5 Horizontal Pressure Vessel Batch


5 Horizontal Jacketed Pressure Vessel Batch


5 Vertical Pressure Vessel Batch


5 Vertical Jacketed Pressure Vesselre Vessel Batch

11


6 Vertical Pressure Vessel Continuous


606Vertical Pressure Vessel Continuous

14

6 Vertical Jacketed Pressure


Vertical Jacketed Pressure Vessel Continuous



606Vertical Jacketed Pressure Vesselacketed Pressure Vessel Continuous

15


7 Utility Boiler Unit


7A Utility Boiler Unit

18

7B Utility Boiler Unit

Icarus Piping and Instrumentation DrawingsIcarus Piping and Instrumentation Drawings


7C Utility Boiler Unit

19

20

8 Compressor



8A Compressor

21

22

9 Air Cooled Heat Exchanger


Air Cooled Heat Exchanger



609Air Cooled Heat ExchangerAir Cooled Heat Exchanger

23


10 Horizontal Pressure Vessel Receiver


10 Horizontal Jacketed Pressure VesselHorizontal Jacketed Pressure Vessel Receiver

25

26

10 Vertical Pressure Vessel


Receiver



10 Vertical Jacketed Pressure Vessel ReceiverVertical Jacketed Pressure Vessel Receiver

27


11 Shell & Tube Heat Exchanger


611Shell & Tube Heat ExchangerShell & Tube Heat Exchanger

29

30

12 Process Heater Furnace



612Process Heater Furnace

31


13 Waste Heat Boiler


14 Water Chiller


614Water Chiller


15 Cooling Tower


615Cooling Tower


16 Motor Driven Centrifugal Pump


616Motor Driven Centrifugal Pump


616Motor Driven Spare Centrifugal Pump


17 Turbine (>500 HP, 375 KW)


18 Storage Vessel


19 Horizontal Pressure Vessel Storage


619Horizontal Pressure VesselHorizontal Pressure Vessel Storage

43


19 Horizontal Jacketed Pressure Vessel Storage


619Horizontal Jacketed Pressure VesselHorizontal Jacketed Pressure Vessel Storage

45


19 Vertical Pressure Vessel Storage


619Vertical Pressure Vessel Storage

47

48

19 Vertical Jacketed Pressure Vessel


Vertical Jacketed Pressure Vessel Storage



619Vertical Jacketed Pressure VesselVertical Jacketed Pressure Vessel Storage

49


20 Pumps Gear & Positive Displacement


21 Reciprocating Compressor


621Reciprocating Compressor


22 Horizontal Pressure Vessel Knockout


622Horizontal Pressure Vessel Knockout


22 Horizontal Jacketed Pressure VesselHorizontal Jacketed Pressure Vessel Knockout

55


622Horizontal Jacketed Pressure Vessel Knockout


22 Vertical Pressure Knockout


622Vertical Pressure Vessel Knockout


22 Vertical Jacketed Pressure VesselVertical Jacketed Pressure Vessel Knockout

59

60

622 Vertical Jacketed Pressure Vessel


622 Vertical Jacketed Pressure Vessel Knockout



23 Enclosed Jacket Reactor Continuous

62

623Enclosed Jacket Reactor


Continuous



23 Open Top Jacket Reactor Continuous

64

623 Open Top Jacket Reactor


Open Top Jacket Reactor Continuous



24 Refrigeration Compressor

66

26 Vessel Heater



27 Motor Driven In-Line Pump


627Motor Driven In-Line Pump


28 Particulate Scrubber


29 Screw Conveyor


30 Plate and Frame Filter

71


31 Water-Sealed Vacuum Pump


32 Fans and Blowers

74

33 Cloth Bay Baghouse Dust Collector


Cloth Bay Baghouse Dust Collector



34 Cyclone Dust Collector

75


36 Live Bottom Bin


37 Cone Bottom Vessel

78

38 Centrifuge Precipitator



39 Horizontal Plate Filter


40 Automatic Batch Centrifuge


41 Manually Operated Centrifuge


45 Fabric Cartridge Filter


46 Tubular Fabric Filter

84

48 Smokeless Flare



51 DDT Gas Adsorption Service


51 Tower Gas Adsorption Service


52 DDT Liquid Adsorption Service


52 Tower Liquid Adsorption Service


53 DDT Extraction Service


53 Tower Extraction Service


54 DDT Absorber Service


54 Tower Absorber Service


55 DDT Stripper with Therm. RB


55 Tower Stripper with Therm. RB


56 DDT Desorber Service


56 Tower Desorber Service


57 Horizontal Thermosiphon Reboiler57 Horizontal Thermosiphon Reboiler

97


57 Vertical Thermosiphon Reboiler


59 DDT Distillation with Therm. RB


659 DDT Distillation with Therm. RB


59 Tower Distillation with Therm. RB


659 Tower Distillation with Therm. RB


60 Continuous Centrifuge


61 Mill


62 Liquid Cyclone SeparatorLiquid Cyclone Separator

105


63 Flotation Cell


64 Conditioning Cell


65 Crusher


66 Scale


67 Turbine (


68 Enclosed Reactor Vessel Continuous

Jacket: See Drawing 23 and 623


668Enclosed Reactor Vessel Continuous



68 Open Top Reactor Vessel Continuous


668Open Top Reactor Vessel Continuous



69 Non-Smokeless Flare

115


70 DDT Distillation with Kettle RB


670 DDT Distillation with Kettle RB


70 Tower Distillation with Kettle RB


670 Tower Distillation with Kettle RB


71 DDT Stripper with Kettle RB


71 Tower Stripper with Kettle RB


72 Air Compressor


73 Graphite Heat Exchanger

123

124

74 Reactor Vessel Batch



74AReactor Vessel Batch

125

126

74BReactor Vessel Batch



74CReactor Vessel Batch

127

128

74D Reactor Vessel Batch


Batch



75 Motor Water to Air Cooling


76 Motor Driven Magnetic Drive Pipe


676Motor Driven Magnetic Drive Pump


79 Storage Tank Cryogenic


80 Rectangular Tile Chest


81 Cylindrical Tile Chest


82 Vibrating Pressure Screen


83 Bow Screen Low Consistency Stock Screen


84 Deflaker


85 Refiner


88 Static Mixer

140

88SStatic Mixer With 316PS Pipe Material


Static Mixer With 316PS Pipe Material



92 Off Machine Pulper


93 On Machine Pulper


99 Rotary Blender


100 Culinary Air Filter


101Culinary (Sterile) Steam Filter F-6


102Sanitary Pipe Filter


103Sanitary Pipe Strainer


104Sanitary Filter Press


105In-Line Metal Trap


106Fluming Reclaim Reel


107Shear Pump Homogenizer


108Homogenizer Piston Head


109High-Speed Mixer (Norman)


110Rotary Bowl/Mixer Blender


111Kettle Blender Without Steam Jacket


111Kettle Blender With Steam Jacket


112Horizontal Ribbon Blender


112Jacket Horizontal Ribbon Blender


113Reversing Anchor Agitator


114Double Motion Agitator


115Fluming Pump


116Air Diaphragm Sanitary Pump


117Sanitary Rotary Lobe Pump


118Sanitary Centrifugal Pump With Flow Control


119Sanitary Horizontal Tank


119Jacket Sanitary Horizontal Tank


120Sanitary Vertical Tank Atmospheric Surge


120Jacket Sanitary Vertical Tank Atmospheric Surge


121Sanitary Vertical Tank Atmospheric Mixing


121Jacket Sanitary Vertical Tank Atmospheric Mixing


122Super Sack Unloader With Screw Conveyor Discharge


123Super Sack Unloader With Pneumatic Conveyance Discharge


124Container Dumper Column


125Container Dumper Hydraulic Drum


126Container Dumper Hydraulic Bin


127Double Pipe Corrugated Exchanger


128Direct Steam Injection (DSI) Exchanger


129Plate & Frame Multizone Heat Exchanger


130Hotwater Set With Shell & Tube Heat Exchanger


131Fluming Dewatering Shaker


135Sanitary Weight Belt Feeder


136Sanitary Floor Scale


137Sanitary Screw Feeder


138Rotary Drum Cooker-Cooler


140Gas Turbine With Combustion Chamber


141Horizontal Pressure Vessel With Boot


141Horizontal Jacketed Pressure Vessel With BootHorizontal Jacketed Pressure Vessel With Boot

187

188

142 Jacketed HT Three Phase Separator With Boot


Jacketed HT Three Phase Separator With Boot



143 Jacketed Three Phase Horizontal Separator With BafflesHorizontal Separator With Baffles

189

190

144 Pressure Vessel Continuous Liquid/Liquid Separator


144 Pressure Vessel Continuous Liquid/Liquid Separator



144 Pressure Vessel ContinuousPressure Vessel Continuous Liquid/Liquid Separator With Boot

191

Liquid/Liquid Separator With Boot


150 Crude Oil Desalter


151 Multi-Diameter Tower w/Therm. RB


Appendix A: Symbols

The symbols represented in Appendix A are superseded by the symbols depicted in the Radpfs program. See the Radpfs drawingapplication for the latest and most complete drawing symbols.

Piping Symbols

Regulating Valve

or

Check Valve


Pressure Safety Valve Flanged Connection

Spectacle Blind Reducer

Rupture Disk Drain

Expansion Joint

196

Instrument Symbols


Note: Displayed on Operator Center CRTwith Digital Controls


Note: Displayed on Operator Center CRTwith Digital Controls


Appendix B:Abbreviations


198 Icarus Piping and Instrumentation DrawingsIcarus Piping and Instrumentation Drawings


Index

0003 Kettle Reboiler, 2004 Horizontal Jacketed Pressure Vessel -

Continuous, 6004 Horizontal Pressure Vessel Continuous, 4005 Horizontal Jacketed Pressure Vessel Batch,

9005 Horizontal Pressure Vessel Batch, 8005 Vertical Jacketed Pressure Vessel Batch, 11005 Vertical Pressure Vessel Batch, 10006 Vertical Jacketed Pressure Vessel

Continuous, 14006 Vertical Pressure Vessel Continuous, 12007 Utility Boiler Unit, 16007A Utility Boiler Unit, 17007B Utility Boiler Unit, 18007C Utility Boiler Unit, 19008 Compressor, 20

008A Compressor, 21009 Air Cooled Heat Exchanger, 22010 Horizontal Jacketed Pressure Vessel

Receiver, 25010 Horizontal Pressure Vessel Receiver, 24010 Vertical Jacketed Pressure Vessel Receiver,

27010 Vertical Pressure Vessel Receiver, 26011 Shell & Tube Heat Exchanger, 28012 Process Heater Furnace, 30013 Waste Heat Boiler, 32014 Water Chiller, 33015 Cooling Tower, 35016 Motor Driven Centrifugal Pump, 37017 Turbine (>500 HP, 375 KW, 40018 Storage Vessel, 41019 Horizontal Jacketed Pressure Vessel

Storage, 44


019 Horizontal Pressure Vessel Storage, 42019 Vertical Jacketed Pressure Vessel Storage,

48019 Vertical Pressure Vessel Storage, 46020 Pumps Gear & Positive Displacement, 50021 Reciprocating Compressor, 51022 Horizontal Jacketed Pressure Vessel

Knockout, 55022 Horizontal Pressure Vessel Knockout, 53022 Vertical Jacketed Pressure Vessel Knockout,

59022 Vertical Pressure Knockout, 57023 Enclosed Jacket Reactor Continuous, 61023 Open Top Jacket Reactor Continuous, 63024 Refrigeration Compressor, 65026 Vessel Heater, 66027 Motor Driven In-Line Pump, 67028 Particulate Scrubber, 69029 Screw Conveyor, 70030 Plate and Frame Filter, 71031 Water-Sealed Vacuum Pump, 72032 Fans and Blowers, 73033 Cloth Bay Baghouse Dust Collector, 74034 Cyclone Dust Collector, 75036 Live Bottom Bin, 76037 Cone Bottom Vessel, 77038 Centrifuge Precipitator, 78039 Horizontal Plate Filter, 79040 Automatic Batch Centrifuge, 80

041 Manually Operated Centrifuge, 81045 Fabric Cartridge Filter, 82046 Tubular Fabric Filter, 83048 Smokeless Flare, 84051 DDT Gas Adsorption Service, 85051 Tower Gas Adsorption Service, 86052 DDT Liquid Adsorption Service, 87052 Tower Liquid Adsorption Service, 88053 DDT Extraction Service, 89053 Tower Extraction Service, 90054 DDT Absorber Service, 91054 Tower Absorber Service, 92055 DDT Stripper with Therm. RB, 93055 Tower Stripper with Therm. RB, 94056 DDT Desorber Service, 95056 Tower Desorber Service, 96057 Horizontal Thermosiphon Reboiler, 97057 Vertical Thermosiphon Reboiler, 98059 DDT Distillation with Therm. RB, 99059 Tower Distillation with Therm. RB, 101060 Continuous Centrifuge, 103061 Mill, 104062 Liquid Cyclone Separator, 105063 Flotation Cell, 106064 Conditioning Cell, 107065 Crusher, 108066 Scale, 109067 Turbine (


068 Open Top Reactor Vessel Continuous, 113069 Non-Smokeless Flare, 115070 DDT Distillation with Kettle RB, 116070 Tower Distillation with Kettle RB, 118071 DDT Stripper with Kettle RB, 120071 Tower Stripper with Kettle RB, 121072 Air Compressor, 122073 Graphite Heat Exchanger, 123074 Reactor Vessel Batch, 124074A Reactor Vessel Batch, 125074B Reactor Vessel Batch, 126074C Reactor Vessel Batch, 127074D Reactor Vessel Batch, 128075 Motor Water to Air Cooling, 129076 Motor Driven Magnetic Drive Pipe, 130080 Rectangular Tile Chest, 133081 Cylindrical Tile Chest, 134082 Vibrating Pressure Screen, 135083 Bow Screen Low Consistency Stock Screen,

136084 Deflaker, 137085 Refiner, 138088 Static Mixer, 139088S Static Mixer With 316PS Pipe Material, 140092 Off Machine Pulper, 141093 On Machine Pulper, 142099 Rotary Blender, 1431100 Culinary Air Filter, 144

101 Culinary (Sterile) Steam Filter F-6, 145102 Sanitary Pipe Filter, 146103 Sanitary Pipe Strainer, 147104 Sanitary Filter Press, 148105 In-Line Metal Trap, 149106 Fluming Reclaim Reel, 150107 Shear Pump Homogenizer, 151108 Homogenizer Piston Head, 152109 High-Speed Mixer (Norman), 153110 Rotary Bowl/Mixer Blender, 154111 Kettle Blender Without Steam Jacket, 155112 Horizontal Ribbon Blender, 157112 Jacket Horizontal Ribbon Blender, 158113 Reversing Anchor Agitator, 159114 Double Motion Agitator, 160115 Fluming Pump, 161116 Air Diaphragm Sanitary Pump, 162117 Sanitary Rotary Lobe Pump, 163118 Sanitary Centrifugal Pump With Flow Control,

164119 Jacket Sanitary Horizontal Tank, 166119 Sanitary Horizontal Tank, 165120 Jacket Sanitary Vertical Tank Atmospheric

Surge, 168120 Sanitary Vertical Tank Atmospheric Surge,

167121 Jacket Sanitary Vertical Tank Atmospheric

Mixing, 170


121 Sanitary Vertical Tank Atmospheric Mixing,169

122 Super Sack Unloader With Screw ConveyorDischarge, 171

123 Super Sack Unloader With PneumaticConveyance Discharge, 172

124 Container Dumper Column, 173125 Container Dumper Hydraulic Drum, 174126 Container Dumper Hydraulic Bin, 175127 Double Pipe Corrugated Exchanger, 176128 Direct Steam Injection (DSI) Exchanger, 177129 Plate & Frame Multizone Heat Exchanger, 178131 Fluming Dewatering Shaker, 180136 Sanitary Floor Scale, 182137 Sanitary Screw Feeder, 183138 Rotary Drum Cooker-Cooler, 184140 Gas Turbine With Combustion Chamber, 185141 Horizontal Jacketed Pressure Vessel With

Boot, 187141 Horizontal Pressure Vessel With Boot, 186142 Jacketed HT Three Phase Separator With

Boot, 188143 Jacketed Three Phase Horizontal Separator

With Baffles, 189144 Pressure Vessel Continuous Liquid/Liquid

Separator, 190144 Pressure Vessel Continuous Liquid/Liquid

Separator With Boot, 191150 Crude Oil Desalter, 192

151 Multi-Diameter Tower w/Therm. RB, 1936603 Kettle Reboiler, 3604 Horizontal Jacketed Pressure Vessel

Continuous, 7604 Horizontal Pressure Vessel Continuous, 5606 Vertical Jacketed Pressure Vessel

Continuous, 15606 Vertical Pressure Vessel Continuous, 13609 Air Cooled Heat Exchanger, 23611 Shell & Tube Heat Exchanger, 29612 Process Heater Furnace, 31614 Water Chiller, 34615 Cooling Tower, 36616 Motor Driven Centrifugal Pump, 38616 Motor Driven Spare Centrifugal Pump, 39619 Horizontal Jacketed Pressure Vessel

Storage, 45619 Horizontal Pressure Vessel Storage, 43619 Vertical Jacketed Pressure Vessel Storage,

49619 Vertical Pressure Vessel Storage, 47621 Reciprocating Compressor, 52622 Horizontal Jacketed Pressure Vessel

Knockout, 56622 Horizontal Pressure Vessel Knockout, 54622 Vertical Jacketed Pressure Vessel Knockout,

60622 Vertical Pressure Vessel Knockout, 58


623 Enclosed Jacket Reactor Continuous, 62623 Open Top Jacket Reactor Continuous, 64627 Motor Driven In-Line Pump, 68659 DDT Distillation with Therm. RB, 100659 Tower Distillation with Therm. RB, 102668 Enclosed Reactor Vessel Continuous, 112668 Open Top Reactor Vessel Continuous, 114670 DDT Distillation with Kettle RB, 117670 Tower Distillation with Kettle RB, 119676 Motor Driven Magnetic Drive Pump, 131779 Vertical Tank Cryogenic, 132AAbsorber service

double diameter tower, 91single diameter tower, 92

AC. See Air Compressors (AC)Agitated Tanks (AT)

COND CELL, 107FLOAT CELL, 106MACH PULP, 142MIXER, 113, 114, 124, 125, 126, 127, 128OFF MACH, 141OPEN TOP, 63, 64, 113, 114REACTOR, 61, 62

Air Compressor, 122Air Compressors (AC)

CENTRIF M, 20

CENTRIF T (See Drawings 17 and 67 forturbines), 20

RECIP GAS, 51, 52RECIP MOTOR, 51, 52SINGLE 1 S, 122SINGLE 2 S, 122

Air Cooled Heat Exchanger, 22, 23Air Diaphragm Sanitary Pump, 162ANSI magnetic drive pump, 130, 131AT. See Agitated Tanks (AT), See Agitated Tanks

(AT)Automatic Batch Centrifuge, 80BBin, live bottom storage, 76BL. See Blenders (BL), See Blenders (BL)Blenders (BL)

ROTARY, 143Boiler unit, 16, 17, 18, 19Boiler, waste heat, 32Bottom bin, live storage, 76Bow Screen Low Consistency Stock Screen, 136CC. See Condensers (C)Centrifugal Pumps (CP)

ANSI, 37, 38ANSI PLAST, 37, 38API 610, 37, 38AXIAL FLOW, 37, 38CANNED, 37, 38


CENTRIF, 37, 38FLUME PUMP, 161GEN SERVE, 37, 38IN LINE, 67, 68MAG DRIVE, 131SAN PUMP, 164

Centrifuge Precipitator, 78Centrifuges (CT)

ATM SUSPEN, 81BATCH AUTO, 80BATCH BOTM, 81BATCH TOP, 81BOT UNLOAD, 81SCREEN BWL, continuous, 103SOLID BOWL, 103TOP UNLOAD, 81VIBRATORY, continuous, 103

Check valvepiping symbol, 194

Cloth Bay Baghouse Dust Collector, 74CO. See Conveyors (CO)Compressor, 20, 21Condensers (C)

BAROMETRIC, 28Conditioning Cell, 107Cone Bottom Vessel, 77Container Dumper Column, 173Container Dumper Hydraulic Bin, 175Container Dumper Hydraulic Drum, 174

Continuous Centrifuge, 103Conveyors (CO)

SCREW, 70Cooling Tower, 35, 36Cooling Towers (CTW)

COOLING, 35, 36COOLING WP, 35, 36

CP. See Centrifugal Pumps (CP)CR. See Crushers (CR)Crude Oil Desalter, 192Crusher, 108Crushers (CR)

CONE, 108GYRATORY, 108

CT. See Centrifuges (CT)CTW. See Cooling Towers (CTW)Culinary (Sterile) Steam Filter F-6, 145Culinary Air Filter, 144Cyclone Dust Collector, 75Cylindrical Tile Chest, 134DDC. See Dust Collectors (DC)DDT. See Double Diameter Towers (DDT),

PACKED/TRAYEDDDT Absorber Service, 91DDT Desorber Service, 95DDT Distillation with Kettle RB, 116, 117DDT Distillation with Therm. RB, 99, 100DDT Extraction Service, 89


DDT Gas Adsorption Service, 85DDT Liquid Adsorption Service, 87DDT Stripper with Kettle RB, 120DDT Stripper with Therm. RB, 93Deflaker, 137Direct connection

instrument symbol, 196Direct Steam Injection (DSI) Exchanger, 177Double Diameter Towers (DDT), PACKED/TRAYED

adsorber, 91desorber, 95distillation with kettle reboiler, 116, 117distillation with therm. reboiler, 99, 100extraction, 89gas adsorption, 85liquid adsorption, 87stripper with kettle reboiler, 120stripper with therm. reboiler, 93

Double Motion Agitator, 160Double Pipe Corrugated Exchanger, 176Drain

piping symbol, 194Dust Collectors (DC)

CENTRIF PRE, 78CLOTH BAY, 74CYCLONE, 75MULT CYCLO, 75PULSE SHKR, 74WASHERS, 69

EElectronic signal

instrument symbol, 196Enclosed Jacket Reactor Continuous, 61, 62Enclosed Reactor Vessel Continuous, 111, 112Expansion joint

piping symbols, 195Extraction service


FF. See Filters (F)Fabric Cartridge Filter, 82Fans (FN)

CENTRIF, 73PROPELLER, 73ROT BLOWER, 73VANEAXIAL, 73

Fans and Blowers, 73Field erected boiler unit, 16, 17, 18, 19Filters (F)

CARTRIDGE, 82PLATE FRAME, 71SAN AIR, 144SAN PRESS, 148SAN STEAM, 145SAN STRAIN, 146SPARKLER, 79TUBULAR, 83


Flanged connectionpiping symbol, 194

Flares (FLR)DERRICK, non-smokeless, 115DERRICK, smokeless, 84GUYED, non-smokeless, 115GUYED, smokeless, 84HORIZONTAL, non-smokeless, 115HORIZONTAL, smokeless, 84SELF SUPP, non-smokeless, 115SELF SUPP, smokeless, 84

Flotation Cell, 106Flow indicator (gauge and rotometer)

instrument symbol, 196FLR. See Flares (FLR)Fluming Dewatering Shaker, 180Fluming Pump, 161Fluming Reclaim Reel, 150FN. See Fans (FN)FU. See Furnaces (FU)Furnaces (FU)

BOX, 30, 31HEATER, 30, 31PYROLYSIS, 30, 31REFORMER, 30, 31VERTICAL, 30, 31

GGas adsorption service

double diameter tower, 85

single diameter tower, 86Gas Compressors (GC)

CENTRIF (See Drawings 17 and 67 for turbines),20

RECIP GAS. SeeRECIP MOTOR. See

Gas Turbine With Combustion Chamber, 185Gauge

flow indicator symbol, 196GC. See Gas Compressors (GC)Gear Pumps (GP)

CANNED RTR, 50GEAR, 50MECH SEAL, 50

GP. See Gear Pumps (GP)Graphite heat exchanger, 123HHE. See Heat Exchangers (HE)Heat Exchangers (HE)

AIR COOLED, 22, 23CORRUGATED, 176graphite heat exchanger, 123HOT WATER, 179MULTI PF, 178SHELL TUBE (See Drawing 26 for

instrumentation), 28, 29STM HE MOD, 177WASTE HEAT, 32

High-Speed Mixer (Norman), 153


Homogenizer Piston Head, 152Horizontal Jacketed Pressure Vessel Batch, 9Horizontal Jacketed Pressure Vessel - Continuous,

6Horizontal Jacketed Pressure Vessel Continuous,

7Horizontal Jacketed Pressure Vessel Knockout,

55, 56Horizontal Jacketed Pressure Vessel Receiver,

25Horizontal Jacketed Pressure Vessel Storage,

44, 45Horizontal Jacketed Pressure Vessel With Boot,

187Horizontal Plate Filter, 79Horizontal Pressure Vessel Batch, 8Horizontal Pressure Vessel Continuous, 4, 5Horizontal Pressure Vessel Knockout, 53, 54Horizontal Pressure Vessel Receiver, 24Horizontal Pressure Vessel Storage, 42, 43Horizontal Pressure Vessel With Boot, 186Horizontal Ribbon Blender, 157Horizontal Tanks (HT)

HORIZ DRUM, batch, 8HORIZ DRUM, continuous, 4, 5HORIZ DRUM, receiver, 24HORIZ DRUM, storage, 41, 42, 53, 54JACKETED, batch, 9JACKETED, continuous, 6, 7

JACKETED, receiver, 25JACKETED, storage, 44, 45

Horizontal Thermosiphon Reboiler, 97Hotwater Set With Shell & Tube Heat Exchanger,

179HT. See Horizontal Tanks (HT)IIn-Line Metal Trap, 149In-line pump, motor driven, 67, 68Interlock

instrument symbol, 196JJacket Horizontal Ribbon Blender, 158Jacket Sanitary Horizontal Tank, 166Jacket Sanitary Vertical Tank Atmospheric

Mixing, 170Jacket Sanitary Vertical Tank Atmospheric

Surge, 168KKettle Blender With Steam Jacket, 156Kettle Blender Without Steam Jacket, 155Kettle Reboiler, 2, 3LLiquid adsorption service


Liquid Cyclone Separator, 105Live Bottom Bin, 76


MM. See Mills (M)Manually Operated Centrifuge, 81Mill, 104Mills (M)

AUTOGENOUS, 104BALL MILL, 104ROD MILL, 104

Mixers (MX)STATIC, 139, 140

Motor Driven Centrifugal Pump, 37, 38Motor Driven In-Line Pump, 67, 68Motor Driven Magnetic Drive Pipe, 130Motor Driven Magnetic Drive Pump, 131Motor Driven Spare Centrifugal Pump, 39Motor Water to Air Cooling, 129MX. See Mixers (MX), See Mixers (MX)NNon-Smokeless Flare, 115OOff Machine Pulper, 141On Machine Pulper, 142Open Top Jacket Reactor Continuous, 63, 64Open Top Reactor Vessel Continuous, 113, 114Orifice plate

instrument symbol, 196PPackaged boiler unit, 16, 17, 18, 19Particulate Scrubber, 69

Plate & Frame Multizone Heat Exchanger, 178Plate and Frame Filter, 71Pneumatic signal

instrument symbol, 196Precipitator, centrifuge, 78Pressure safety valve

piping symbol, 194Pressure screen, 135Pressure vessel

horizontal - batch, 8horizontal - continuous, 4, 5horizontal - knockout, 53, 54horizontal - receiver, 24horizontal - storage, 42, 43horizontal - with boot, 186horizontal jacketed - batch, 9horizontal jacketed - continuous, 6, 7horizontal jacketed - knockout, 55, 56horizontal jacketed - receiver, 25horizontal jacketed - storage, 44, 45horizontal jacketed - with boot, 187vertical - batch, 10vertical - continuous, 12, 13vertical - knockout, 57, 58vertical - receiver, 26, 27vertical - storage, 46, 47, 48vertical jacketed - batch, 11vertical jacketed - continuous, 14, 15vertical jacketed - knockout, 59, 60


vertical jacketed - storage, 49Process Heater Furnace, 30, 31Pumps. See also Centrifugal Pumps (CP); Gear

Pumps (GP); Vacuum Pumps (VP)DIAPHRAGM, 50DUPLEX, 50HD STOCK, 50RECIP MOTR, 50ROTARY, 50SIMPLEX, 50SLURRY, 50TRIPLEX, 50

Pumps Gear & Positive Displacement, 50RRB. See Reboilers (RB)Reactor

enclosed jacket - continuous, 61, 62open top - continuous, 63, 64

Reactor vesselbatch, 124, 125, 126, 127, 128enclosed - continuous, 111, 112open top - continuous, 113, 114

Reboilers (RB)KETTLE, 2, 3THERMOSIPH - horizontal, 97THERMOSIPH - vertical, 98

Reciprocating Compressor, 51, 52Rectangular Tile Chest, 133Reducer

piping symbol, 194Refrigeration Compressor, 65Refrigeration Units (RU)

CENT COMPR, 33, 34MECHANICAL, 65

Regulating valvepiping symbol, 194

Relay functioninstrument symbol, 196

Reversing Anchor Agitator, 159Rotary Blender, 143Rotary Bowl/Mixer Blender, 154Rotary Drum Cooker-Cooler, 184Rotometer

flow indicator symbol, 196RU. See Refrigeration Units (RU)Rupture disk

piping symbol, 194SS. See Scales (S)Sanitary Centrifugal Pump With Flow Control, 164Sanitary direct steam heat module, 177Sanitary double pipe corrugated exchanger, 176Sanitary Filter Press, 148Sanitary Floor Scale, 182Sanitary Horizontal Tank, 165Sanitary multi-zone plate & frame exchanger, 178Sanitary Pipe Filter, 146Sanitary Pipe Strainer, 147


Sanitary Rotary Lobe Pump, 163Sanitary Screw Feeder, 183Sanitary Vertical Tank - Atmospheric Mixing, 170Sanitary Vertical Tank Atmospheric Mixing, 169Sanitary Vertical Tank - Atmospheric Surge, 168Sanitary Vertical Tank Atmospheric Surge, 167Sanitary Weight Belt Feeder, 181Scale, 109Scales (S)

BELT, 109SAN FLOOR, 182TRACK, 109TRUCK, 109

Screens (VS)PRESSURE, 135STOCK, 136

Screw Conveyor, 70Scrubber, particulate, 69SE. See Separation Equipment (SE)Separation Equipment (SE)

WATER CYCL, 105Shear Pump Homogenizer, 151Shell & Tube Heat Exchanger, 28, 29Single Diameter Towers (TW), PACKED/TRAYED

absorber, 92desorber, 96distillation with kettle reboiler, 118, 119distillation with therm. reboiler, 101, 102extraction, 90

gas adsorption, 86liquid adsorption, 88stripper with kettle reboiler, 121stripper with therm. reboiler, 94

Smokeless Flare, 84Solenoid

instrument symbol, 196Spectacle blind

piping symbol, 194ST. See Stock Treatments (ST)Static Mixer, 139Static Mixer With 316PS Pipe Material, 140STB. See Steam Boilers (STB)Steam Boilers (STB)

BOILER, 16, 17, 18, 19STM BOILER, 16, 17, 18, 19

Stock Treatments (ST)DEFLAKER CN, 137DEFLAKER DK, 137REFINER, 138

Storage Vessel, 41Super Sack Unloader With Pneumatic Conveyance

Discharge, 172Super Sack Unloader With Screw Conveyor

Discharge, 171Symbols

instrumentation, 196piping, 194


TTower

Multi-Diameter with Therm RB, 193Tower Absorber Service, 92Tower Desorber Service, 96Tower Distillation with Kettle RB, 118, 119Tower Distillation with Therm. RB, 101, 102Tower Extraction Service, 90Tower Gas Adsorption Service, 86Tower Liquid Adsorption Service, 88Tower Stripper with Kettle RB, 121Tower Stripper with Therm. RB, 94Tubular Fabric Filter, 83TUR. See Turbines (TUR)Turbine (500 HP, 375 KW, 40Turbines (TUR)

CONDENSING, 40, 110GAS, 110NON COND, 40, 110

TW. See Single Diameter Towers (TW),PACKED/TRAYED

UUtility Boiler Unit, 16, 17, 18, 19VVacuum Pumps (VP)

MECH BOOST, 72MECHANICAL, 72WATER SEAL, 72

Vertical Jacketed Pressure Vessel Batch, 11Vertical Jacketed Pressure Vessel Continuous,

14, 15Vertical Jacketed Pressure Vessel Knockout, 59,

60Vertical Jacketed Pressure Vessel Receiver, 27Vertical Jacketed Pressure Vessel Storage, 48,

49Vertical Pressure Knockout, 57Vertical Pressure Vessel Batch, 10Vertical Pressure Vessel Continuous, 12, 13Vertical Pressure Vessel Knockout, 58Vertical Pressure Vessel Receiver, 26Vertical Pressure Vessel Storage, 46, 47Vertical Tank Cryogenic, 132Vertical Tanks (VT)

Cryogenic, 132JACKETED, batch, 11JACKETED, continuous, 14, 15JACKETED, knockout, 59, 60JACKETED, storage, 48, 49MULTI WALL, batch, 10MULTI WALL, continuous, 12, 13MULTI WALL, knockout, 58MULTI WALL, receiver, 26, 27MULTI WALL, storage, 57SAN TANK, 167, 168, 170STORAGE, 46, 47WOOD TANK, 46, 47


Vertical Thermosiphon Reboiler, 98Vessel Heater, 66Vibrating Pressure Screen, 135VP. See Vacuum Pumps (VP)VS. See Screens (VS)

VT. See Vertical Tanks (VT)WWaste Heat Boiler, 32Water Chiller, 33, 34Water-Sealed Vacuum Pump, 72

ContentsIntroductionDrawings3 Kettle Reboiler603Kettle Reboiler4Horizontal Pressure Vessel Continuous604Horizontal Pressure Vessel Continuous4Horizontal Jacketed Pressure Vessel - Continuous604Horizontal Jacketed Pressure Vessel Continuous5Horizontal Pressure Vessel Batch5Horizontal Jacketed Pressure Vessel Batch5Vertical Pressure Vessel Batch5Vertical Jacketed Pressure Vessel Batch6Vertical Pressure Vessel Continuous606Vertical Pressure Vessel Continuous6Vertical Jacketed Pressure Vessel Continuous606Vertical Jacketed Pressure Vessel Continuous7Utility Boiler Unit7AUtility Boiler Unit7BUtility Boiler Unit7CUtility Boiler Unit8Compressor8ACompressor9Air Cooled Heat Exchanger609Air Cooled Heat Exchanger10Horizontal Pressure Vessel Receiver10Horizontal Jacketed Pressure Vessel Receiver10Vertical Pressure Vessel Receiver10Vertical Jacketed Pressure Vessel Receiver11Shell & Tube Heat Exchanger611Shell & Tube Heat Exchanger12Process Heater Furnace612Process Heater Furnace13Waste Heat Boiler14Water Chiller614Water Chiller15Cooling Tower615 Cooling Tower 16Motor Driven Centrifugal Pump616Motor Driven Centrifugal Pump616Motor Driven Spare Centrifugal Pump17Turbine (>500 HP, 375 KW)18Storage Vessel19Horizontal Pressure Vessel Storage619Horizontal Pressure Vessel Storage19Horizontal Jacketed Pressure Vessel Storage619Horizontal Jacketed Pressure Vessel Storage19Vertical Pressure Vessel Storage619Vertical Pressure Vessel Storage19Vertical Jacketed Pressure Vessel Storage619Vertical Jacketed Pressure Vessel Storage20Pumps Gear & Positive Displacement21Reciprocating Compressor621Reciprocating Compressor22Horizontal Pressure Vessel Knockout622Horizontal Pressure Vessel Knockout22Horizontal Jacketed Pressure Vessel Knockout622Horizontal Jacketed Pressure Vessel Knockout22Vertical Pressure Knockout622Vertical Pressure Vessel Knockout22Vertical Jacketed Pressure Vessel Knockout622 Vertical Jacketed Pressure Vessel Knockout23Enclosed Jacket Reactor Continuous623Enclosed Jacket Reactor Continuous23Open Top Jacket Reactor Continuous623 Open Top Jacket Reactor Continuous24Refrigeration Compressor26Vessel Heater27Motor Driven In-Line Pump627Motor Driven In-Line Pump28Particulate Scrubber29Screw Conveyor30Plate and Frame Filter31Water-Sealed Vacuum Pump32Fans and Blowers33Cloth Bay Baghouse Dust Collector34Cyclone Dust Collector36Live Bottom Bin37Cone Bottom Vessel38Centrifuge Precipitator39Horizontal Plate Filter40Automatic Batch Centrifuge41Manually Operated Centrifuge45Fabric Cartridge Filter46Tubular Fabric Filter48Smokeless Flare51DDT Gas Adsorption Service51Tower Gas Adsorption Service52 DDT Liquid Adsorption Service52 Tower Liquid Adsorption Service53 DDT Extraction Service53 Tower Extraction Service54 DDT Absorber Service54 Tower Absorber Service55 DDT Stripper with Therm. RB55 Tower Stripper with Therm. RB56 DDT Desorber Service56 Tower Desorber Service57 Horizontal Thermosiphon Reboiler57 Vertical Thermosiphon Reboiler59 DDT Distillation with Therm. RB659 DDT Distillation with Therm. RB59 Tower Distillation with Therm. RB659 Tower Distillation with Therm. RB60Continuous Centrifuge61Mill62Liquid Cyclone Separator63 Flotation Cell64Conditioning Cell65 Crusher66Scale67Turbine (

IcarusPIDV7_3_1-Ref

Documents

aspen icarus volumetric

internal volumetric

icarus piping

aspentech proprietary

aspen leaf logo

paint materials

series drawings

aspentechs software