This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Pin Name Color Function1 PSIN violet Positive Sine2 NSIN black Negative Sine3 PCOS gray-pink Positive Cosine4 NCOS red-blue Negative Cosine5 GND red Ground6 GND blue Ground7 A white Digital output A8 NA brown Digital output negative A9 B green Digital output B10 NB yellow Digital output negative B11 Z gray Digital output Z12 NZ pink Digital output negative ZNote: Use J2 to connect 5V.
J2: BiSS connector and power supply(JST, ZH connector)
Pin Name Color Function1 VDD red Power supply 5 V (95 mA)2 GND blue Ground3 SL+ pink Data input P4 SL- gray Data input N5 MA+ green Clock P6 MA- yellow Clock N
Pin configuration BiSS(9-pin Sub-D, female)
Pin Name Color Function1 n.c.2 MA+ green Clock P3 MA- yellow Clock N4 VDD red Power supply 5 V (95 mA)5 n.c.6 GND blue Ground7 SL+ pink Data output P8 SL- gray Data output N9 n.c.Note: n.c. pin not connected
Related to circuit diagram Figure 12 und 13Device Value (typical) CommentC1, C2, C3, C4, C6, C7 100 nF SMD-C 100 nF 10% X7R 16 V Size 0402 h<0.6 mmC5, C8 1 uF SMD-C 1 uF 10% X7R 16 V Size 0603D1 RED SMD-LED LS-T67K as iC-HF and iC-MSA data error detectorD2, D3, D4, D5, D6 5 V SMD-TVSD (5x) 5 V BI GMF05C-HSF LLP75-6L (SOT363)D7 5 V SMD-TVSD 5 V BI SMDJ5.0CA DO214ABJ1 2x6-pole Connector (JST BM12B-ZPDSS-TF)J2 1x6-pole Connector (JST B6B-ZR-SM4-TF)R1, R2, R4 1k5Ω SMD-R 1k5 1% Size 0402R3, R6 4k7Ω SMD-R 4k7 1% Size 0402R5 120Ω SMD-R 120R 1% Size 1206R7 16k9Ω SMD-R array 16k9 (2x) 25ppm/0.25%/0.1% 0606U1 iC-MU DFN16-5x5U2 iC-MSA TSSOP20-TPU3 iC-HF QFN32-5x5U4 2k SMD-IC EEPROM 2k CAT24AA02 SOT23-5 (85 °C)
Figure 12: PCB module MU1C (top side)
Figure 13: PCB module MU1C (bottom side)
Note: Terminal marking of MA+ and MA- is reversed on initial layout. The terminal marking in figure 12 is thecurrent one and should be treated as the guideline.
iC-Haus expressly reserves the right to change its products and/or specifications. An info letter gives details as to any amendments and additions made to therelevant current specifications on our internet website www.ichaus.com/infoletter; this letter is generated automatically and shall be sent to registered users byemail.Copying – even as an excerpt – is only permitted with iC-Haus’ approval in writing and precise reference to source.iC-Haus does not warrant the accuracy, completeness or timeliness of the specification and does not assume liability for any errors or omissions in thesematerials.The data specified is intended solely for the purpose of product description. No representations or warranties, either express or implied, of merchantability, fitnessfor a particular purpose or of any other nature are made hereunder with respect to information/specification or the products to which information refers and noguarantee with respect to compliance to the intended use is given. In particular, this also applies to the stated possible applications or areas of applications ofthe product.iC-Haus products are not designed for and must not be used in connection with any applications where the failure of such products would reasonably be expectedto result in significant personal injury or death (Safety-Critical Applications) without iC-Haus’ specific written consent. Safety-Critical Applications include, withoutlimitation, life support devices and systems. iC-Haus products are not designed nor intended for use in military or aerospace applications or environments or inautomotive applications unless specifically designated for such use by iC-Haus.iC-Haus conveys no patent, copyright, mask work right or other trade mark right to this product. iC-Haus assumes no liability for any patent and/or other trademark rights of a third party resulting from processing or handling of the product and/or any other use of the product.