HYUNDAI PARTS AND MAINTENANCE MANUAL From WorldWide Electric WorldWide Electric Corporation P.O. Box 307, Pittsford, NY 14534 USA Phone: 800-808-2131 ♦ Fax: 800-711-1616 www.worldwideelectric.net
HYUNDAI PARTS ANDMAINTENANCE MANUAL From WorldWide Electric
WorldWide Electric CorporationP.O. Box 307, Pittsford, NY 14534 USAPhone: 800-808-2131 ♦ Fax: 800-711-1616www.worldwideelectric.net
General Information Page 1
Motor Accessories / Parts Premium Efficiency Bearing Cap Kits Page 2 Drip Cover Kits Page 2 Endbells Page 3 Eyebolts Page 4 Junction Boxes Page 4 Fans and Fan Covers Page 5 C-Flange Kits and D-Flange Kits Page 6
IEEE-841 Bearing Cap Kits Page 7 Drip Cover Kits Page 7 Endbells Page 8 Eyebolts Page 8 Fans Page 9 Fan Covers Page 10 Junction Boxes Page 10 C-Flange Kits Page 10
Explosion Proof Fan Covers Page 11 Junction Boxes Page 11 Eyebolts Page 11
Motor Data Sheets
Premium Efficiency Page 12 IEEE-841 Page 13 Explosion Proof Page 14
Motor Dimensions
Premium Efficiency Page 15-17 IEEE-841 Page 18-20 Explosion Proof Page 21-23 Warranty Policy Page 24
Installation and Maintenance
Receiving Page 25 Warnings Page 25-26 Storage Page 26 Location Page 26 Mounting Page 26-28 Power Supply and Connections Page 29-30 Testing Page 31 Start-Up Page 31 Inspection Page 32 Lubrication Page 32 Service Page 32
HYUNDAI PARTS AND MAINTENANCE MANUAL Table Of Contents
HYUNDAI Parts and Maintenance ▐ www.worldwideelectric.net 1
HYUNDAI PARTS AND MAINTENANCE MANUAL
MISSION STATEMENT: To be the most customer and employee focused organization in the markets within which we compete, offering products and a workplace that exceeds expectations for quality, performance, reliability and market innovation.
PRICES:All prices in this HYUNDAI Parts and Maintenance Manual are list prices. For your cost / multiplier please contact your WorldWide Electric salesperson at 1-800-808-2131 Ext. 3.
PREFACE:This manual lists all HYUNDAI standard replacement parts. Most parts are available from stock at one of our ten locations and ready for immediate shipment. For next day air shipment please contact WorldWide Electric at 1-800-808-2131 Ext. 3. Parts included in this manual are to be used on HYUNDAI electric motors only.
HOW TO ORDER:You can either call 1-800-808-2131 Ext. 3 or fax your order to 1-800-711-1616, WorldWide Electric corporate office. When ordering a HYUNDAI replacement part, please have the following information ready: complete part description, motor model number, description of the part and what type of motor the part came off of.
REPLACEMENT PARTS SALES POLICY:1. Minimum invoice charge per order is $25.00.
2. All shipments F.O.B. from nearest WorldWide Warehouse. No freight allowance.
3. All orders subject to acceptance by WorldWide Electric. Credit department terms are net 30 days. If credit card is used, the purchaser agrees to pay the issuer of the credit card the total amount shown on the invoice upon presentation of a bill without offset or deduction.
4. Specifications are subject to change without notice. No product can be returned if hooked up or painted. Restocking charge of 15% applies. No parts returned without written authorization.
General Information GEN
ERAL
INFO
RMATIO
N
www.worldwideelectric.net ▐ HYUNDAI Parts and Maintenance2
HYUNDAI PARTS AND MAINTENANCE MANUAL
Motor Accessories / PartsHYUNDAI Crown TritonTM Series ▪ Premium Efficiency
FrameSize
ModelNumber Description List *
Price
PREMIUM EFFICIENCY - BEARING CAP KITS - DRIVE-END
364T / 365T (2 POLE) HBCDE2P360 DE BEARING CAP KIT FOR FRAMES 364T / 365T - 2 POLE $125.00
404T / 405T (2 POLE) HBCDE2P400 DE BEARING CAP KIT FOR FRAMES 404T / 405T - 2 POLE $135.00
404T / 405T (4/6 POLE) HBCDE400 DE BEARING CAP KIT FOR FRAMES 404T / 405T - 4/6 POLE $135.00
444T / 445T / 447T / 449T (2 POLE) HBCDE2P440 DE BEARING CAP KIT FOR FRAMES 444T / 445T / 447T / 449T - 2 POLE $140.00
444T / 445T / 447T / 449T (4/6 POLE) HBCDE440 DE BEARING CAP KIT FOR FRAMES 444T / 445T / 447T / 449T - 4/6 POLE $145.00
PREMIUM EFFICIENCY - BEARING CAP KITS - OPPOSITE DRIVE-END
364T / 365T HBCNDE360 ODE BEARING CAP KIT FOR FRAMES 364T / 365T $125.00
404T / 405T HBCNDE400 ODE BEARING CAP KIT FOR FRAMES 404T / 405T $135.00
444T / 445T / 447T / 449T (2 POLE) HBCNDE2P440 ODE BEARING CAP KIT FOR FRAMES 444T / 445T / 447T / 449T - 2 POLE $140.00
444T / 445T / 447T / 449T (4/6 POLE) HBCNDE440 ODE BEARING CAP KIT FOR FRAMES 444T / 445T / 447T / 449T - 4/6 POLE $145.00
PREMIUM EFFICIENCY - DRIP COVER KITS
143T / 145T DC140 DRIP COVER KIT FOR FRAMES 143T / 145T $55.00
182T / 184T DC180 DRIP COVER KIT FOR FRAMES 182T / 184T $75.00
213T / 215T DC210 DRIP COVER KIT FOR FRAMES 213T / 215T $80.00
254T / 256T DC250 DRIP COVER KIT FOR FRAMES 254T / 256T $105.00
284T / 286T DC280 DRIP COVER KIT FOR FRAMES 284T / 286T $150.00
324T / 326T DC320 DRIP COVER KIT FOR FRAMES 324T / 326T $180.00
364T / 365T DC360 DRIP COVER KIT FOR FRAMES 364T / 365T $210.00
404T / 405T DC400 DRIP COVER KIT FOR FRAMES 404T / 405T $250.00
444T / 445T / 447T / 449T DC440 DRIP COVER KIT FOR FRAMES 444T / 445T / 447T / 449T $275.00
BEARING CAP KIT DRIP COVER KIT
* Prices seen here are list - please call for your multiplier.
MO
TOR
ACC
ESSO
RIES
/ PA
RTS
HYUNDAI Parts and Maintenance ▐ www.worldwideelectric.net 3
HYUNDAI PARTS AND MAINTENANCE MANUAL
FrameSize
ModelNumber Description List *
Price
PREMIUM EFFICIENCY ENDBELLS - DRIVE-END
143T / 145T HESDE140 DE ENDBELL FOR FRAMES 143T / 145T $105.00
182T / 184T HESDE180 DE ENDBELL FOR FRAMES 182T / 184T $135.00
213T / 215T HESDE210 DE ENDBELL FOR FRAMES 213T / 215T $180.00
254T / 256T HESDE250 DE ENDBELL FOR FRAMES 254T / 256T $330.00
284T / 286T HESDE280 DE ENDBELL FOR FRAMES 284T / 286T $435.00
324T / 326T HESDE320 DE ENDBELL FOR FRAMES 324T / 326T $575.00
364T / 365T (2 POLE) HESDE2P360 DE ENDBELL FOR FRAMES 364T / 365T - 2 POLE $795.00
364T / 365T (4/6 POLE) HESDE360 DE ENDBELL FOR FRAMES 364T / 365T - 4/6 POLE $875.00
404T / 405T (2 POLE) HESDE2P400 DE ENDBELL FOR FRAMES 404T / 405T - 2 POLE $1,125.00
404T / 405T (4/6 POLE) HESDE400 DE ENDBELL FOR FRAMES 404T / 405T - 4/6 POLE $1,050.00
444T / 445T / 447T / 449T (2 POLE) HESDE2P440 DE ENDBELL FOR FRAMES 444T / 445T / 447T / 449T - 2 POLE $1,215.00
444T / 445T / 447T / 449T (4/6 POLE) HESDE440 DE ENDBELL FOR FRAMES 444T / 445T / 447T / 449T - 4/6 POLE $1,315.00
PREMIUM EFFICIENCY ENDBELLS - OPPOSITE DRIVE-END
143T / 145T HESNDE140 ODE ENDBELL FOR FRAMES 143T / 145T $105.00
182T / 184T HESNDE180 ODE ENDBELL FOR FRAMES 182T / 184T $135.00
213T / 215T HESNDE210 ODE ENDBELL FOR FRAMES 213T / 215T $180.00
254T / 256T HESNDE250 ODE ENDBELL FOR FRAMES 254T / 256T $330.00
284T / 286T HESNDE280 ODE ENDBELL FOR FRAMES 284T / 286T $435.00
324T / 326T HESNDE320 ODE ENDBELL FOR FRAMES 324T / 326T $575.00
364T / 365T HESNDE360 ODE ENDBELL FOR FRAMES 364T / 365T $875.00
404T / 405T HESNDE400 ODE ENDBELL FOR FRAMES 404T / 405T $1,050.00
444T / 445T / 447T / 449T (2 POLE) HESNDE2P440 ODE ENDBELL FOR FRAMES 444T / 445T / 447T / 449T - 2 POLE $1,215.00
444T / 445T / 447T / 449T (4/6 POLE) HESNDE440 ODE ENDBELL FOR FRAMES 444T / 445T / 447T / 449T - 4/6 POLE $1,175.00
ENDBELL - DE ENDBELL - ODE
* Prices seen here are list - please call for your multiplier.
Motor Accessories / PartsHYUNDAI Crown TritonTM Series ▪ Premium Efficiency
MO
TOR
ACCESSO
RIES / PARTS
www.worldwideelectric.net ▐ HYUNDAI Parts and Maintenance4
HYUNDAI PARTS AND MAINTENANCE MANUAL
FrameSize
ModelNumber Description List *
Price
PREMIUM EFFICIENCY EYEBOLTS
182T / 184T NEB180 EYEBOLT FOR FRAMES 182T / 184T $25.00
213T / 215T NEB210 EYEBOLT FOR FRAMES 213T / 215T $25.00
254T / 256T NEB250 EYEBOLT FOR FRAMES 254T / 256T $40.00
284T / 286T NEB280 EYEBOLT FOR FRAMES 284T / 286T $40.00
324T / 326T NEB320 EYEBOLT FOR FRAMES 324T / 326T $45.00
364T / 365T NEB360 EYEBOLT FOR FRAMES 364T / 365T $50.00
404T / 405T NEB400 EYEBOLT FOR FRAMES 404T / 405T $60.00
444T / 445T / 447T / 449T NEB440 EYEBOLT FOR FRAMES 444T / 445T / 447T / 449T $85.00
PREMIUM EFFICIENCY JUNCTION BOXES - INCLUDES BOX & COVER
143T / 145T HJBOX140 JUNCTION BOX FOR FRAMES 143T / 145T $75.00
182T / 184T HJBOX180 JUNCTION BOX FOR FRAMES 182T / 184T $82.00
213T / 215T HJBOX210 JUNCTION BOX FOR FRAMES 213T / 215T $85.00
254T / 256T HJBOX250 JUNCTION BOX FOR FRAMES 254T / 256T $195.00
284T / 286T HJBOX280 JUNCTION BOX FOR FRAMES 284T / 286T $200.00
324T / 326T HJBOX320 JUNCTION BOX FOR FRAMES 324T / 326T $485.00
364T / 365T HJBOX360 JUNCTION BOX FOR FRAMES 364T / 365T $550.00
404T / 405T HJBOX400 JUNCTION BOX FOR FRAMES 404T / 405T $885.00
444T / 445T / 447T / 449T HJBOX440 JUNCTION BOX FOR FRAMES 444T / 445T / 447T / 449T $900.00
JUNCTION BOX - INCLUDES BOX & COVER
* Prices seen here are list - please call for your multiplier.
Motor Accessories / PartsHYUNDAI Crown TritonTM Series ▪ Premium Efficiency
EYEBOLTS
MO
TOR
ACC
ESSO
RIES
/ PA
RTS
HYUNDAI Parts and Maintenance ▐ www.worldwideelectric.net 5
HYUNDAI PARTS AND MAINTENANCE MANUAL
FrameSize
ModelNumber Description List *
Price
PREMIUM EFFICIENCY FANS
143T / 145T (2 POLE) HF1402P FAN FOR FRAMES 143T / 145T - 2 POLE $35.00
143T / 145T (4/6 POLE) HF140 FAN FOR FRAMES 143T / 145T - 4/6 POLE $35.00
182T / 184T (2 POLE) HF1802P FAN FOR FRAMES 182T / 184T - 2 POLE $45.00
182T / 184T (4/6 POLE) HF1804P6P FAN FOR FRAMES 182T / 184T - 4/6 POLE $45.00
213T / 215T (2 POLE) HF2102P4P FAN FOR FRAMES 213T / 215T - 2/4 POLE $50.00
213T / 215T (4/6 POLE) HF2106P FAN FOR FRAMES 213T / 215T - 6 POLE $50.00
254T / 256T (2 POLE) HF2502P FAN FOR FRAMES 254T / 256T - 2 POLE $110.00
254T / 256T (4/6 POLE) HF250 FAN FOR FRAMES 254T / 256T - 4/6 POLE $100.00
284T / 286T (2 POLE) HF2802P FAN FOR FRAMES 284T / 286T - 2 POLE $122.00
284T / 286T (4/6 POLE) HF280 FAN FOR FRAMES 284T / 286T - 4/6 POLE $115.00
324T / 326T (2 POLE) HF3202P FAN FOR FRAMES 324T / 326T - 2 POLE $150.00
324T / 326T (4/6 POLE) HF320 FAN FOR FRAMES 324T / 326T - 4/6 POLE $140.00
364T / 365T (2 POLE) HF3602P FAN FOR FRAMES 364T / 365T - 2 POLE $195.00
364T / 365T (4 POLE) HF360 FAN FOR FRAMES 364T / 365T - 4 POLE $280.00
364T / 365T (6 POLE) HF3606P FAN FOR FRAMES 364T / 365T - 6 POLE $280.00
404T / 405T (2 POLE) HF4002P FAN FOR FRAMES 404T / 405T - 2 POLE $230.00
404T / 405T (4 POLE) HF400 FAN FOR FRAMES 404T / 405T - 4 POLE $280.00
404T / 405T (6 POLE) HF4006P FAN FOR FRAMES 404T / 405T - 6 POLE $280.00
444T / 445T / 447T / 449T (2 POLE) HF4402P FAN FOR FRAMES 444T / 445T / 447T / 449T - 2 POLE $280.00
444T / 445T / 447T / 449T (4 POLE) HF440 FAN FOR FRAMES 444T / 445T / 447T / 449T - 4 POLE $280.00
444T (6 POLE) HF4446P FAN FOR FRAME 444T - 6 POLE $280.00
445T (6 POLE) HF4456P FAN FOR FRAME 445T - 6 POLE $280.00
447T (6 POLE) HF4476P FAN FOR FRAME 447T - 6 POLE $280.00
449T (6 POLE) HF4496P FAN FOR FRAME 449T - 6 POLE $280.00
PREMIUM EFFICIENCY FAN COVERS - STEEL
143T / 145T HSFC140 FAN COVER (STEEL) FOR FRAMES 143T / 145T $51.00
182T / 184T HSFC180 FAN COVER (STEEL) FOR FRAMES 182T / 184T $73.00
213T / 215T HSFC210 FAN COVER (STEEL) FOR FRAMES 213T / 215T $78.00
254T / 256T HSFC250 FAN COVER (STEEL) FOR FRAMES 254T / 256T $134.00
284T / 286T HSFC280 FAN COVER (STEEL) FOR FRAMES 284T / 286T $185.00
324T / 326T HSFC320 FAN COVER (STEEL) FOR FRAMES 324T / 326T $225.00
364T / 365T HSFC360 FAN COVER (STEEL) FOR FRAMES 364T / 365T $365.00
404T / 405T HSFC400 FAN COVER (STEEL) FOR FRAMES 404T / 405T $425.00
444T / 445T / 447T / 449T HSFC440 FAN COVER (STEEL) FOR FRAMES 444T / 445T / 447T / 449T $500.00
PREMIUM EFFICIENCY FAN COVERS - CAST IRON
143T / 145T HCIFC140 FAN COVER (CAST IRON) FOR FRAMES 143T / 145T $95.00
182T / 184T HCIFC180 FAN COVER (CAST IRON) FOR FRAMES 182T / 184T $105.00
213T / 215T HCIFC210 FAN COVER (CAST IRON) FOR FRAMES 213T / 215T $140.00
254T / 256T HCIFC250 FAN COVER (CAST IRON) FOR FRAMES 254T / 256T $225.00
284T / 286T HCIFC280 FAN COVER (CAST IRON) FOR FRAMES 284T / 286T $275.00
324T / 326T HCIFC320 FAN COVER (CAST IRON) FOR FRAMES 324T / 326T $375.00
364T / 365T HCIFC360 FAN COVER (CAST IRON) FOR FRAMES 364T / 365T $790.00
404T / 405T HCIFC400 FAN COVER (CAST IRON) FOR FRAMES 404T / 405T $885.00
444T / 445T / 447T / 449T HCIFC440 FAN COVER (CAST IRON) FOR FRAMES 444T / 445T / 447T / 449T $1,005.00
* Prices seen here are list - please call for your multiplier.
Motor Accessories / PartsHYUNDAI Crown TritonTM Series ▪ Premium Efficiency
MO
TOR
ACCESSO
RIES / PARTS
www.worldwideelectric.net ▐ HYUNDAI Parts and Maintenance6
HYUNDAI PARTS AND MAINTENANCE MANUAL
FrameSize
ModelNumber Description List *
Price
PREMIUM EFFICIENCY C-FLANGE KiTS
143T / 145T H140TC C-FLANGE KIT FOR FRAMES 143T / 145T $45.00
182T / 184T H180TC C-FLANGE KIT FOR FRAMES 182T / 184T $64.00
213T / 215T H210TC C-FLANGE KIT FOR FRAMES 213T / 215T $90.00
254T / 256T H250TC C-FLANGE KIT FOR FRAMES 254T / 256T $155.00
284T / 286T H280TC C-FLANGE KIT FOR FRAMES 284T / 286T $195.00
324T / 326T H320TC C-FLANGE KIT FOR FRAMES 324T / 326T $265.00
364T / 365T (2 POLE) H3602PTC C-FLANGE KIT FOR FRAMES 364T / 365T - 2 POLE $380.00
364T / 365T (4/6 POLE) H360TC C-FLANGE KIT FOR FRAMES 364T / 365T - 4/6 POLE $380.00
404T / 405T (2 POLE) H4002PTC C-FLANGE KIT FOR FRAMES 404T / 405T - 2 POLE $580.00
404T / 405T (4/6 POLE) H400TC C-FLANGE KIT FOR FRAMES 404T / 405T - 4/6 POLE $580.00
444T / 445T (2 POLE) H4402PTC C-FLANGE KIT FOR FRAMES 444T / 445T - 2 POLE $580.00
444T / 445T (4/6 POLE) H445TC C-FLANGE KIT FOR FRAMES 444T / 445T - 4/6 POLE $580.00
447T (2 POLE) H4402PTC C-FLANGE KIT FOR FRAME 447T - 2 POLE $580.00
447T (4/6 POLE) H447TC C-FLANGE KIT FOR FRAME 447T - 4/6 POLE $580.00
449T (2 POLE) H4402PTC C-FLANGE KIT FOR FRAME 449T - 2 POLE $580.00
449T (4/6 POLE) H449TC C-FLANGE KIT FOR FRAME 449T - 4/6 POLE $615.00
PREMIUM EFFICIENCY D-FLANGE KITS
143T / 145T H140TD D-FLANGE KIT FOR FRAMES 143T / 145T $140.00
182T / 184T H180TD D-FLANGE KIT FOR FRAMES 182T / 184T $183.00
213T / 215T H210TD D-FLANGE KIT FOR FRAMES 213T / 215T $256.00
254T / 256T H250TD D-FLANGE KIT FOR FRAMES 254T / 256T $300.00
284T / 286T H280TD D-FLANGE KIT FOR FRAMES 284T / 286T $356.00
324T / 326T H320TD D-FLANGE KIT FOR FRAMES 324T / 326T $505.00
364T / 365T (2 POLE) H3602PTD D-FLANGE KIT FOR FRAMES 364T / 365T - 2 POLE $655.00
364T / 365T (4/6 POLE) H360TD D-FLANGE KIT FOR FRAMES 364T / 365T - 4/6 POLE $655.00
404T / 405T (2 POLE) H4002PTD D-FLANGE KIT FOR FRAMES 404T / 405T - 2 POLE $810.00
404T / 405T (4/6 POLE) H400TD D-FLANGE KIT FOR FRAMES 404T / 405T - 4/6 POLE $810.00
444T / 445T (2 POLE) H4402PTD D-FLANGE KIT FOR FRAMES 444T / 445T - 2 POLE $1,010.00
444T / 445T (4/6 POLE) H445TD D-FLANGE KIT FOR FRAMES 444T / 445T - 4/6 POLE $1,010.00
447T (2 POLE) H4402PTD D-FLANGE KIT FOR FRAME 447T - 2 POLE $1,010.00
447T (4/6 POLE) H447TD D-FLANGE KIT FOR FRAME 447T - 4/6 POLE $1,010.00
449T (2 POLE) H4402PTD D-FLANGE KIT FOR FRAME 449T - 2 POLE $1,010.00
449T (4/6 POLE) H449TD D-FLANGE KIT FOR FRAME 449T - 4/6 POLE $1,060.00
Motor Accessories / PartsHYUNDAI Crown TritonTM Series ▪ Premium Efficiency
C-FLANGE KIT D-FLANGE KIT
* Prices seen here are list - please call for your multiplier.
MO
TOR
ACC
ESSO
RIES
/ PA
RTS
HYUNDAI Parts and Maintenance ▐ www.worldwideelectric.net 7
HYUNDAI PARTS AND MAINTENANCE MANUAL
FrameSize
ModelNumber Description List *
Price
IEEE-841 BEARING CAP KITS - DRIVE-END
364T / 365T IHBCDE360 DE BEARING CAP KIT FOR FRAMES 364T / 365T $192.00
404T / 405T (2 POLE) IHBCDE2P400 DE BEARING CAP KIT FOR FRAMES 404T / 405T - 2 POLE $192.00
404T / 405T (4/6 POLE) IHBCDE400 DE BEARING CAP KIT FOR FRAMES 404T / 405T - 4/6 POLE $210.00
444T / 445T / 447T / 449T (2 POLE) IHBCDE2P440 DE BEARING CAP KIT FOR FRAMES 444T / 445T / 447T / 449T - 2 POLE $210.00
444T / 445T / 447T / 449T (4/6 POLE) IHBCDE440 DE BEARING CAP KIT FOR FRAMES 444T / 445T / 447T / 449T - 4/6 POLE $258.00
IEEE-841 BEARING CAP KITS - OPPOSITE DRIVE-END
364T / 365T (2 POLE) HBCNDE2P360 ODE BEARING CAP KIT FOR FRAMES 364T / 365T - 2 POLE $192.00
364T / 365T (4/6 POLE) HBCNDE360 ODE BEARING CAP KIT FOR FRAMES 364T / 365T - 4/6 POLE $192.00
404T / 405T HBCNDE400 ODE BEARING CAP KIT FOR FRAMES 404T / 405T $192.00
444T / 445T / 447T / 449T (2 POLE) HBCNDE2P440 ODE BEARING CAP KIT FOR FRAMES 444T / 445T / 447T / 449T - 2 POLE $210.00
444T / 445T / 447T / 449T (4/6 POLE) HBCNDE440 ODE BEARING CAP KIT FOR FRAMES 444T / 445T / 447T / 449T - 4/6 POLE $258.00
IEEE-841 DRIP COVER KITS
143T / 145T IDC140 DRIP COVER KIT FOR FRAMES 143T / 145T $73.00
182T / 184T IDC180 DRIP COVER KIT FOR FRAMES 182T / 184T $94.00
213T / 215T IDC210 DRIP COVER KIT FOR FRAMES 213T / 215T $103.00
254T / 256T IDC250 DRIP COVER KIT FOR FRAMES 254T / 256T $150.00
284T / 286T IDC280 DRIP COVER KIT FOR FRAMES 284T / 286T $188.00
324T / 326T IDC320 DRIP COVER KIT FOR FRAMES 324T / 326T $210.00
364T / 365T IDC360 DRIP COVER KIT FOR FRAMES 364T / 365T $253.00
404T / 405T IDC400 DRIP COVER KIT FOR FRAMES 404T / 405T $300.00
444T / 445T / 447T / 449T (2 POLE) IDC440 DRIP COVER KIT FOR FRAMES 444T / 445T / 447T / 449T $334.00
Motor Accessories / PartsHYUNDAI Crown TritonTM Series ▪ IEEE-841
* Prices seen here are list - please call for your multiplier.
MO
TOR
ACCESSO
RIES / PARTS
www.worldwideelectric.net ▐ HYUNDAI Parts and Maintenance8
HYUNDAI PARTS AND MAINTENANCE MANUAL
FrameSize
ModelNumber Description List *
Price
IEEE-841 ENDBELLS - DRIVE-END
143T / 145T IHESDE140 DE ENDBELL FOR FRAMES 143T / 145T $120.00
182T / 184T IHESDE180 DE ENDBELL FOR FRAMES 182T / 184T $150.00
213T / 215T IHESDE210 DE ENDBELL FOR FRAMES 213T / 215T $204.00
254T / 256T IHESDE250 DE ENDBELL FOR FRAMES 254T / 256T $432.00
284T / 286T IHESDE280 DE ENDBELL FOR FRAMES 284T / 286T $569.00
324T / 326T IHESDE320 DE ENDBELL FOR FRAMES 324T / 326T $857.00
364T / 365T (2 POLE) IHESDE2P360 DE ENDBELL FOR FRAMES 364T / 365T - 2 POLE $971.00
364T / 365T (4/6 POLE) IHESDE360 DE ENDBELL FOR FRAMES 364T / 365T - 4/6 POLE $1,055.00
404T / 405T (2 POLE) IHESDE2P400 DE ENDBELL FOR FRAMES 404T / 405T - 2 POLE $1,283.00
404T / 405T (4/6 POLE) IHESDE400 DE ENDBELL FOR FRAMES 404T / 405T - 4/6 POLE $1,331.00
444T / 445T / 447T / 449T (2 POLE) IHESDE2P440 DE ENDBELL FOR FRAMES 444T / 445T / 447T / 449T - 2 POLE $1,690.00
444T / 445T / 447T / 449T (4/6 POLE) IHESDE440 DE ENDBELL FOR FRAMES 444T / 445T / 447T / 449T - 4/6 POLE $1,786.00
IEEE-841 ENDBELLS - OPPOSITE DRIVE-END
143T / 145T IHESNDE140 ODE ENDBELL FOR FRAMES 143T / 145T $120.00
182T / 184T IHESNDE180 ODE ENDBELL FOR FRAMES 182T / 184T $150.00
213T / 215T IHESNDE210 ODE ENDBELL FOR FRAMES 213T / 215T $204.00
254T / 256T IHESNDE250 ODE ENDBELL FOR FRAMES 254T / 256T $444.00
284T / 286T IHESNDE280 ODE ENDBELL FOR FRAMES 284T / 286T $581.00
324T / 326T IHESNDE320 ODE ENDBELL FOR FRAMES 324T / 326T $797.00
364T / 365T IHESNDE360 ODE ENDBELL FOR FRAMES 364T / 365T $1,031.00
404T / 405T IHESNDE400 ODE ENDBELL FOR FRAMES 404T / 405T $1,259.00
444T / 445T / 447T / 449T (2 POLE) IHESNDE2P440 ODE ENDBELL FOR FRAMES 444T / 445T / 447T / 449T - 2 POLE $1,606.00
444T / 445T / 447T / 449T (4/6 POLE) IHESNDE440 ODE ENDBELL FOR FRAMES 444T / 445T / 447T / 449T - 4/6 POLE $1,606.00
EYEBOLTS
182T / 184T NEB180 EYEBOLT FOR FRAMES 182T / 184T $25.00
213T / 215T NEB210 EYEBOLT FOR FRAMES 213T / 215T $25.00
254T / 256T NEB250 EYEBOLT FOR FRAMES 254T / 256T $40.00
284T / 286T NEB280 EYEBOLT FOR FRAMES 284T / 286T $40.00
324T / 326T NEB320 EYEBOLT FOR FRAMES 324T / 326T $45.00
364T / 365T NEB360 EYEBOLT FOR FRAMES 364T / 365T $50.00
404T / 405T NEB400 EYEBOLT FOR FRAMES 404T / 405T $60.00
44T / 445T / 447T / 449T NEB440 EYEBOLT FOR FRAMES 444T / 445T / 447T / 449T $85.00
* Prices seen here are list - please call for your multiplier.
ENDBELL - ODEENDBELL - ODEENDBELL - DE
Motor Accessories / PartsHYUNDAI Crown TritonTM Series ▪ IEEE-841
MO
TOR
ACC
ESSO
RIES
/ PA
RTS
HYUNDAI Parts and Maintenance ▐ www.worldwideelectric.net 9
HYUNDAI PARTS AND MAINTENANCE MANUAL
FrameSize
ModelNumber Description List *
Price
IEEE-841 FANS
143T / 145T (2 POLE) IHF1402P FAN FOR FRAMES 143T / 145T - 2 POLE $36.00
1 HP / 1.5 HP (4 POLE) IHF140-1-1.5-4P FAN FOR 1 HP / 1.5 HP - 4 POLE $36.00
2 HP (4 POLE) IHF140-2-6P FAN FOR 2 HP - 4 POLE $36.00
2 HP (6 POLE) IHF140-2-6P FAN FOR 2 HP - 6 POLE $36.00
182T / 184T (2 POLE) IHF1802P FAN FOR FRAMES 182T / 184T - 2 POLE $45.00
182T / 184T (4/6 POLE) IHF1804P6P FAN FOR FRAMES 182T / 184T - 4/6 POLE $45.00
213T / 215T (2 POLE) IHF2102P4P FAN FOR FRAMES 213T / 215T - 2/4 POLE $51.00
213T / 215T (4/6 POLE) IHF2106P FAN FOR FRAMES 213T / 215T - 6 POLE $51.00
254T / 256T (2 POLE) IHF2502P-2544P FAN FOR FRAMES 254T / 256T - 2 POLE $108.00
254T (4 POLE) IHF2502P-2544P FAN FOR FRAME 254T - 4 POLE $108.00
256T (4 POLE) IHF2506P-2564P FAN FOR FRAME 256T - 4 POLE $96.00
254T / 256T (6 POLE) IHF2506P-2564P FAN FOR FRAMES 254T / 256T - 6 POLE $96.00
284T / 286T (2 POLE) IHF2802P FAN FOR FRAMES 284T / 286T - 2 POLE $120.00
284T / 286T (4/6 POLE) IHF280 FAN FOR FRAMES 284T / 286T - 4/6 POLE $114.00
324T / 326T (2 POLE) IHF3202P FAN FOR FRAMES 324T / 326T - 2 POLE $150.00
324T / 326T (4/6 POLE) IHF320 FAN FOR FRAMES 324T / 326T - 4/6 POLE $138.00
364T / 365T (2 POLE) IHF3602P FAN FOR FRAMES 364T / 365T - 2 POLE $192.00
364T / 365T (4 POLE) IHF360 FAN FOR FRAMES 364T / 365T - 4 POLE $276.00
364T / 365T (6 POLE) IHF3606P FAN FOR FRAMES 364T / 365T - 6 POLE $276.00
404T / 405T (2 POLE) IHF4002P FAN FOR FRAMES 404T / 405T - 2 POLE $228.00
404T / 405T (4 POLE) IHF400 FAN FOR FRAMES 404T / 405T - 4 POLE $276.00
404T / 405T (6 POLE) IHF4006P FAN FOR FRAMES 404T / 405T - 6 POLE $276.00
444T / 445T (2 POLE) IHF4402P FAN FOR FRAMES 444T / 445T - 2 POLE $551.00
444T / 445T (2 POLE) CCW ODE IHF4402P-CCWODE FAN FOR FRAMES 444T / 445T - 2 POLE - CCW ODE $551.00
444T (4 POLE) IHF444 FAN FOR FRAME 444T - 4 POLE $276.00
444T (6 POLE) IHF4446P FAN FOR FRAME 444T - 6 POLE $282.00
445T (4 POLE) IHF445 FAN FOR FRAME 445T - 4 POLE $276.00
445T (6 POLE) IHF4456P FAN FOR FRAME 445T - 6 POLE $282.00
447T / 449T (2 POLE) IHF4402P FAN FOR FRAMES 447T / 449T - 2 POLE $551.00
447T / 449T (2 POLE) CCW ODE IHF4402P-CCWODE FAN FOR FRAMES 447T / 449T - 2 POLE - CCW ODE $551.00
447T (4 POLE) IHF447 FAN FOR FRAME 447T - 4 POLE $276.00
447T (6 POLE) IHF4476P FAN FOR FRAME 447T - 6 POLE $282.00
449T (4 POLE) IHF449 FAN FOR FRAME 449T - 4 POLE $276.00
449T (6 POLE) IHF4496P FAN FOR FRAME 449T - 6 POLE $330.00
FAN
* Prices seen here are list - please call for your multiplier.
Motor Accessories / PartsHYUNDAI Crown TritonTM Series ▪ IEEE-841
MO
TOR
ACCESSO
RIES / PARTS
www.worldwideelectric.net ▐ HYUNDAI Parts and Maintenance10
HYUNDAI PARTS AND MAINTENANCE MANUAL
Frame Size
ModelNumber Description List *
Price
IEEE-841 FAN COVERS - CAST IRON
143T / 145T IHCIFC140 FAN COVER (CAST IRON) FOR FRAMES 143T / 145T $137.00
182T / 184T IHCIFC180 FAN COVER (CAST IRON) FOR FRAMES 182T / 184T $158.00
213T / 215T IHCIFC210 FAN COVER (CAST IRON) FOR FRAMES 213T / 215T $214.00
254T / 256T IHCIFC250 FAN COVER (CAST IRON) FOR FRAMES 254T / 256T $317.00
284T / 286T IHCIFC280 FAN COVER (CAST IRON) FOR FRAMES 284T / 286T $411.00
324T / 326T IHCIFC320 FAN COVER (CAST IRON) FOR FRAMES 324T / 326T $548.00
IEEE-841 JUNCTION BOXES - INCLUDES BOX & COVER
143T / 145T IHJBOX140 JUNCTION BOX FOR FRAMES 143T / 145T $180.00
182T / 184T IHJBOX180 JUNCTION BOX FOR FRAMES 182T / 184T $276.00
213T / 215T IHJBOX210 JUNCTION BOX FOR FRAMES 213T / 215T $276.00
254T / 256T IHJBOX250 JUNCTION BOX FOR FRAMES 254T / 256T $444.00
284T / 286T IHJBOX280 JUNCTION BOX FOR FRAMES 284T / 286T $444.00
324T / 326T IHJBOX320 JUNCTION BOX FOR FRAMES 324T / 326T $659.00
364T / 365T IHJBOX360 JUNCTION BOX FOR FRAMES 364T / 365T $833.00
404T / 405T IHJBOX400 JUNCTION BOX FOR FRAMES 404T / 405T $1,217.00
444T / 445T / 447T / 449T IHJBOX440 JUNCTION BOX FOR FRAMES 444T / 445T / 447T / 449T $1,217.00
IEEE-841 C-FLANGE KITS
324T / 326T IH320TC C-FLANGE KIT FOR FRAMES 324T / 326T $676.00
364T / 365T IH360TC C-FLANGE KIT FOR FRAMES 364T / 365T $955.00
404T / 405T IH400TC C-FLANGE KIT FOR FRAMES 404T / 405T $1,130.00
444T / 445T IH440TC C-FLANGE KIT FOR FRAMES 444T / 445T $1,545.00
* Prices seen here are list - please call for your multiplier.
FAN COVER
Motor Accessories / PartsHYUNDAI Crown TritonTM Series ▪ IEEE-841
C-FLANGE KITJUNCTION BOX - INCLUDES BOX & COVER
MO
TOR
ACC
ESSO
RIES
/ PA
RTS
HYUNDAI Parts and Maintenance ▐ www.worldwideelectric.net 11
HYUNDAI PARTS AND MAINTENANCE MANUAL
FrameSize
ModelNumber Description List *
Price
EXPLOSION PROOF FAN COVERS - STEEL
143T / 145T XHSFC140 FAN COVER (STEEL) FOR FRAMES 143T / 145T
PLEASECALLFOR
PRICING
182T / 184T XHSFC180 FAN COVER (STEEL) FOR FRAMES 182T / 184T
213T / 215T XHSFC210 FAN COVER (STEEL) FOR FRAMES 213T / 215T
254T / 256T XHSFC250 FAN COVER (STEEL) FOR FRAMES 254T / 256T
284T / 286T XHSFC280 FAN COVER (STEEL) FOR FRAMES 284T / 286T
324T / 326T XHSFC320 FAN COVER (STEEL) FOR FRAMES 324T / 326T
364T / 365T XHSFC360 FAN COVER (STEEL) FOR FRAMES 364T / 365T
404T / 405T XHSFC400 FAN COVER (STEEL) FOR FRAMES 404T / 405T
444T / 445T / 447T XHSFC440 FAN COVER (STEEL) FOR FRAMES 444T / 445T / 447T
449T XHSFC449 FAN COVER (STEEL) FOR FRAME 449T
EXPLOSION PROOF JUNCTION BOXES - INCLUDES BOX & COVER
143T / 145T XHJBOX140 XP JUNCTION BOX FOR FRAMES 143T / 145T
PLEASECALLFOR
PRICING
182T / 184T XHJBOX180 XP JUNCTION BOX FOR FRAMES 182T / 184T
213T / 215T XHJBOX210 XP JUNCTION BOX FOR FRAMES 213T / 215T
254T / 256T XHJBOX250 XP JUNCTION BOX FOR FRAMES 254T / 256T
284T / 286T XHJBOX280 XP JUNCTION BOX FOR FRAMES 284T / 286T
324T / 326T XHJBOX320 XP JUNCTION BOX FOR FRAMES 324T / 326T
364T / 365T XHJBOX360 XP JUNCTION BOX FOR FRAMES 364T / 365T
404T / 405T XHJBOX400 XP JUNCTION BOX FOR FRAMES 404T / 405T
444T / 445T / 447T / 449T XHJBOX440 XP JUNCTION BOX FOR FRAMES 444T / 445T / 447T / 449T
EYEBOLTS
182T / 184T NEB180 EYEBOLT FOR FRAMES 182T / 184T $25.00
213T / 215T NEB210 EYEBOLT FOR FRAMES 213T / 215T $25.00
254T / 256T NEB250 EYEBOLT FOR FRAMES 254T / 256T $40.00
284T / 286T NEB280 EYEBOLT FOR FRAMES 284T / 286T $40.00
324T / 326T NEB320 EYEBOLT FOR FRAMES 324T / 326T $45.00
364T / 365T NEB360 EYEBOLT FOR FRAMES 364T / 365T $50.00
404T / 405T NEB400 EYEBOLT FOR FRAMES 404T / 405T $60.00
44T / 445T / 447T / 449T NEB440 EYEBOLT FOR FRAMES 444T / 445T / 447T / 449T $85.00
* Prices seen here are list - please call for your multiplier.
Motor Accessories / PartsHYUNDAI Crown TritonTM Series ▪ Explosion Proof
JUNCTION BOX - INCLUDES BOX & COVER
MO
TOR
ACCESSO
RIES / PARTS
www.worldwideelectric.net ▐ HYUNDAI Parts and Maintenance12
HYUNDAI PARTS AND MAINTENANCE MANUAL
Rated Ouput
(HP)Pole Frame
Size
Characteristics at Rated Output Locked Rotor Current
Torque Moment of Inertia
WK2
(Ib.ft.2)
NEMA Code Letter
Approx.Weight
(Ibs.)
Full Load Speed (RPM)
Efficiency Power Factor Full Load Current Full Load (Ib.ft.)
Locked Rotor
(% FLT)
Break-down
(% FLT)Full Load Nom.(%)
3/4 Load (%)
Full Load (p.u.)
@ 460 V (A)
@ 575 V (A)
@ 460 V (A)
@ 575 V (A)
2 143T 3500 77.00 77.20 0.820 1.5 1.2 14.9 11.9 1.5 200 270 0.031 N 531 4 143T 1740 85.50 85.60 0.700 1.6 1.3 14.6 11.7 3.0 280 310 0.059 N 53
6 145T 1140 82.50 82.70 0.650 1.8 1.4 14.0 11.2 4.6 180 275 0.083 N 552 143T 3500 84.00 84.20 0.840 2.0 1.6 19.6 15.7 2.2 185 260 0.033 M 53
1.5 4 145T 1735 86.50 86.70 0.720 2.2 1.8 20.0 16.0 4.5 260 290 0.076 M 556 182T 1160 87.50 87.70 0.680 2.3 1.9 19.7 15.8 6.7 190 270 0.593 L 902 145T 3500 85.50 85.70 0.850 2.6 2.1 24.6 19.7 3.0 180 250 0.042 L 55
2 4 145T 1735 86.50 86.70 0.730 3.0 2.4 24.7 19.8 6.1 245 280 0.078 L 556 184T 1155 88.50 88.70 0.700 3.0 2.4 24.0 19.2 9.1 180 260 0.712 L 1052 182T 3515 86.50 86.70 0.850 3.8 3.0 28.5 22.8 4.4 190 260 0.071 J 90
3 4 182T 1760 89.50 89.60 0.790 3.9 3.1 30.1 24.1 8.8 220 280 0.190 J 906 213T 1175 89.50 89.50 0.680 4.5 3.6 32.7 26.1 13.2 180 250 0.949 K 1502 184T 3515 88.50 88.70 0.860 6.1 4.9 45.8 36.6 7.4 190 260 0.166 J 105
5 4 184T 1760 89.50 89.70 0.800 6.5 5.2 49.3 39.4 14.8 210 260 0.309 J 1056 215T 1170 89.50 89.50 0.700 7.4 5.9 50.4 40.3 22.3 170 220 1.234 K 1652 213T 3520 89.50 89.70 0.860 9.0 7.2 62.8 50.2 11.0 160 260 0.332 H 150
7.5 4 213T 1760 91.70 91.70 0.790 9.5 7.6 73.4 58.7 22.0 190 250 0.570 J 1506 254T 1175 91.00 91.10 0.740 10.3 8.2 69.7 55.8 33.0 170 250 2.136 J 2602 215T 3525 90.20 90.30 0.870 12.0 9.6 81.6 65.3 15.0 160 260 0.451 H 165
10 4 215T 1760 91.70 91.70 0.805 12.8 10.2 95.6 76.5 30.0 180 240 0.712 J 1656 256T 1175 91.00 91.10 0.750 13.8 11.0 93.8 75.0 45.0 170 250 3.086 J 3002 254T 3535 91.70 91.70 0.890 16.9 13.5 113.3 90.7 21.9 180 250 0.926 G 260
15 4 254T 1775 92.40 92.40 0.815 18.3 14.7 124.7 99.7 43.7 200 240 2.136 H 2606 284T 1175 91.70 91.80 0.760 19.8 15.8 132.7 106.2 66.0 160 240 4.984 H 3602 256T 3535 91.70 91.70 0.890 23.1 18.5 149.9 120.0 29.9 180 250 1.163 G 300
20 4 256T 1775 93.00 93.00 0.815 24.8 19.9 168.9 135.1 59.5 200 240 2.635 H 3006 286T 1175 91.70 91.80 0.770 26.7 21.3 176.0 140.8 89.9 150 230 6.100 H 3902 284TS 3560 91.70 91.70 0.890 28.5 22.8 199.2 159.3 36.6 160 230 1.899 H 380
25 4 284T 1775 93.60 93.80 0.820 30.3 24.2 205.7 164.6 73.4 170 220 3.940 H 3806 324T 1175 93.00 93.20 0.800 31.2 25.0 212.2 169.8 110.9 160 220 8.094 H 5502 286TS 3560 91.70 91.70 0.890 33.8 27.1 236.8 189.5 43.5 160 230 2.089 G 410
30 4 286T 1775 93.60 93.80 0.820 36.0 28.8 244.6 195.7 87.3 170 220 5.578 H 4106 326T 1175 93.00 93.20 0.800 37.1 29.7 252.4 201.9 131.9 160 220 10.443 H 5602 324TS 3560 92.40 92.60 0.895 45.5 36.4 296.0 236.8 59.4 160 230 3.987 G 550
40 4 324T 1780 94.10 94.10 0.820 48.8 39.0 341.6 273.3 118.7 160 220 7.121 H 5506 364T 1185 94.10 94.30 0.820 48.8 39.0 331.8 265.5 178.4 150 220 26.650 H 7802 326TS 3560 93.00 93.20 0.895 55.8 44.6 368.2 294.6 73.2 160 230 4.272 G 560
50 4 326T 1780 94.50 94.50 0.820 59.9 47.9 419.5 335.6 146.4 160 220 8.307 H 5606 365T 1185 94.10 94.30 0.820 60.2 48.1 409.3 327.4 220.0 150 220 32.000 H 8402 364TS 3570 94.10 94.10 0.915 65.6 52.5 446.1 356.8 88.8 140 220 9.280 G 780
60 4 364T 1780 95.00 95.10 0.850 69.9 56.0 468.6 374.9 178.1 150 220 17.640 G 7806 404T 1185 94.50 94.70 0.840 71.2 56.9 476.7 381.4 267.5 140 220 46.280 G 11202 365TS 3570 94.50 94.50 0.915 79.8 63.9 542.9 434.3 108.5 140 220 11.040 G 820
75 4 365T 1780 95.40 95.50 0.850 85.1 68.1 587.4 469.9 217.7 150 220 20.900 G 8206 405T 1185 94.50 94.70 0.840 87.0 69.6 591.3 473.1 327.0 140 220 55.310 G 12202 405TS 3570 94.50 94.50 0.905 110.1 88.1 770.5 616.4 148.0 120 220 18.450 G 1110
100 4 405T 1780 95.40 95.40 0.865 114.1 91.3 741.5 593.2 296.8 140 220 35.910 G 11106 444T 1185 95.00 95.20 0.850 116.6 93.3 792.7 634.2 445.9 140 220 73.410 G 15302 444TS 3570 95.00 95.00 0.900 139.5 111.6 976.2 781.0 187.5 120 220 27.420 G 1610
125 4 444T 1785 95.40 95.50 0.880 142.0 113.6 994.2 795.4 375.0 140 220 52.510 G 15306 445T 1185 95.00 95.20 0.850 147.7 118.1 996.7 797.4 564.8 140 220 89.860 G 17002 445TS 3570 95.00 95.00 0.900 161.5 129.2 1130.3 904.3 217.1 120 220 33.660 G 1770
150 4 445T 1785 95.80 95.90 0.880 163.8 131.0 1146.4 917.1 434.2 140 220 67.430 G 16406 447T 1185 95.80 96.00 0.850 169.5 135.6 1152.9 922.3 654.0 140 220 106.310 G 19702 447TS 3570 95.40 95.40 0.900 219.3 175.4 1534.9 1227.9 296.0 120 220 44.130 G 1900
200 4 447T 1785 96.20 96.30 0.880 222.4 177.9 1556.7 1245.4 592.0 140 220 73.030 G 18606 449T 1185 95.80 96.00 0.850 231.2 185.0 1572.2 1257.7 891.8 140 220 153.550 G 2430
2502 449TS 3570 95.80 95.80 0.900 276.6 221.3 1936.1 1548.9 375.0 120 220 58.330 G 24304 449T 1785 96.20 96.30 0.880 281.7 225.4 1971.9 1577.5 749.9 140 220 105.370 G 2430
Motor Data SheetsHYUNDAI Crown TritonTM Series ▪ Premium Efficiency
MO
TOR
DAT
A S
HEE
TS
HYUNDAI Parts and Maintenance ▐ www.worldwideelectric.net 13
HYUNDAI PARTS AND MAINTENANCE MANUAL
Rated Ouput
(HP)Pole Frame
Size
Characteristics at Rated Output Locked Rotor Current
Torque Moment of Inertia
WK2
(Ib.ft.2)
NEMA Code Letter
Approx.Weight
(Ibs.)
Full Load Speed (RPM)
Efficiency Power Factor Full Load Current Full Load (Ib.ft.)
Locked Rotor
(% FLT)
Break-down
(% FLT)Full Load Nom.(%)
3/4 Load (%)
Full Load (p.u.)
@ 460 V (A)
@ 575 V (A)
@ 460 V (A)
@ 575 V (A)
2 143T 3500 77.00 77.20 0.820 1.5 1.2 14.9 11.9 1.5 200 270 0.031 N 531 4 143T 1740 85.50 85.60 0.700 1.6 1.3 14.6 11.7 3.0 280 310 0.059 N 53
6 145T 1140 82.50 82.70 0.650 1.8 1.4 14.0 11.2 4.6 180 275 0.083 N 552 143T 3500 84.00 84.20 0.840 2.0 1.6 19.6 15.7 2.2 185 260 0.033 M 53
1.5 4 145T 1735 86.50 86.70 0.720 2.2 1.8 20.0 16.0 4.5 260 290 0.076 M 556 182T 1160 87.50 87.70 0.680 2.3 1.9 19.7 15.8 6.7 190 270 0.593 L 902 145T 3500 85.50 85.70 0.850 2.6 2.1 24.6 19.7 3.0 180 250 0.042 L 55
2 4 145T 1735 86.50 86.70 0.730 3.0 2.4 24.7 19.8 6.1 245 280 0.078 L 556 184T 1155 88.50 88.70 0.700 3.0 2.4 24.0 19.2 9.1 180 260 0.712 L 1052 182T 3515 86.50 86.70 0.850 3.8 3.0 28.5 22.8 4.4 190 260 0.071 J 90
3 4 182T 1760 89.50 89.60 0.790 3.9 3.1 30.1 24.1 8.8 220 280 0.190 J 906 213T 1175 89.50 89.50 0.680 4.5 3.6 32.7 26.1 13.2 180 250 0.949 K 1502 184T 3515 88.50 88.70 0.860 6.1 4.9 45.8 36.6 7.4 190 260 0.166 J 105
5 4 184T 1760 89.50 89.70 0.800 6.5 5.2 49.3 39.4 14.8 210 260 0.309 J 1056 215T 1170 89.50 89.70 0.700 7.4 5.9 50.4 40.3 22.3 170 220 1.234 K 1652 213T 3520 89.50 89.70 0.860 9.0 7.2 62.8 50.2 11.0 160 260 0.332 H 150
7.5 4 213T 1760 91.70 91.70 0.790 9.5 7.6 73.4 58.7 22.0 190 250 0.570 J 1506 254T 1175 91.00 91.10 0.740 10.3 8.2 69.7 55.8 33.0 170 250 2.136 J 2602 215T 3525 90.20 90.30 0.870 12.0 9.6 81.6 65.3 15.0 160 260 0.451 H 165
10 4 215T 1760 91.70 91.70 0.805 12.8 10.2 95.6 76.5 30.0 180 240 0.712 J 1656 256T 1175 91.00 91.10 0.750 13.8 11.0 93.8 75.0 45.0 170 250 3.086 J 3002 254T 3535 91.70 91.70 0.890 16.9 13.5 113.3 90.7 21.9 180 250 0.926 G 260
15 4 254T 1775 92.40 92.40 0.815 18.3 14.7 124.7 99.7 43.7 200 240 2.136 H 2606 284T 1175 91.70 91.80 0.760 19.8 15.8 132.7 106.2 66.0 160 240 4.984 H 3602 256T 3535 91.70 91.70 0.890 23.1 18.5 149.9 120.0 29.9 180 250 1.163 G 300
20 4 256T 1775 93.00 93.00 0.815 24.8 19.9 168.9 135.1 59.5 200 240 2.635 H 3006 286T 1175 91.70 91.80 0.770 26.7 21.3 176.0 140.8 89.9 150 230 6.100 H 3902 284TS 3560 91.70 91.70 0.890 28.5 22.8 199.2 159.3 36.6 160 230 1.899 H 380
25 4 284T 1775 93.60 93.80 0.820 30.3 24.2 205.7 164.6 73.4 170 220 3.940 H 3806 324T 1175 93.00 93.20 0.800 31.2 25.0 212.2 169.8 110.9 160 220 8.094 H 5502 286TS 3560 91.70 91.70 0.890 33.8 189.5 236.8 189.5 43.5 160 230 2.089 G 410
30 4 286T 1775 93.60 93.80 0.820 36.0 195.7 244.6 195.7 87.3 170 220 5.578 H 4106 326T 1175 93.00 93.20 0.800 37.1 201.9 252.4 201.9 131.9 160 220 10.443 H 5602 324TS 3560 92.40 92.60 0.895 45.5 236.8 296.0 236.8 59.4 160 230 3.987 G 550
40 4 324T 1780 94.10 94.10 0.820 48.8 273.3 341.6 273.3 118.7 160 220 7.121 H 5506 364T 1185 94.10 94.30 0.820 48.8 265.5 331.8 265.5 178.4 150 220 26.650 H 7802 326TS 3560 93.00 93.20 0.895 55.8 294.6 368.2 294.6 73.2 160 230 4.272 G 560
50 4 326T 1780 94.50 94.50 0.820 59.9 335.6 419.5 335.6 146.4 160 220 8.307 H 5606 365T 1185 94.10 94.30 0.820 60.2 327.4 409.3 327.4 220.0 150 220 32.000 H 8402 364TS 3570 94.10 94.10 0.915 65.6 356.8 446.1 356.8 88.8 140 220 9.280 G 780
60 4 364T 1780 95.00 95.10 0.850 69.9 374.9 468.6 374.9 178.1 150 220 17.640 G 7806 404T 1185 94.50 94.70 0.840 71.2 381.4 476.7 381.4 267.5 140 220 46.280 G 11202 365TS 3570 94.50 94.50 0.915 79.8 434.3 542.9 434.3 108.5 140 220 11.040 G 820
75 4 365T 1780 95.40 95.50 0.850 85.1 469.9 587.4 469.9 217.7 150 220 20.900 G 8206 405T 1185 94.50 94.70 0.840 87.0 473.1 591.3 473.1 327.0 140 220 55.310 G 12202 405TS 3570 94.50 94.50 0.905 110.1 616.4 770.5 616.4 148.0 120 220 18.450 G 1110
100 4 405T 1780 95.40 95.40 0.865 114.1 593.2 741.5 593.2 296.8 140 220 35.910 G 11106 444T 1185 95.00 95.20 0.850 116.6 634.2 792.7 634.2 445.9 140 220 73.410 G 15302 444TS 3570 95.00 95.00 0.900 139.5 781.0 976.2 781 187.5 120 220 27.420 G 1610
125 4 444T 1785 95.40 95.50 0.880 142.0 795.4 994.2 795.4 375.0 140 220 52.510 G 15306 445T 1185 95.00 95.20 0.850 147.7 797.4 996.7 797.4 564.8 140 220 89.860 G 17002 445TS 3570 95.00 95.00 0.900 161.5 904.3 1130.3 904.3 217.1 120 220 33.660 G 1770
150 4 445T 1785 95.80 95.90 0.880 163.8 917.1 1146.4 917.1 434.2 140 220 67.430 G 16406 447T 1185 95.80 96.00 0.850 169.5 922.3 1152.9 922.3 654.0 140 220 106.310 G 19702 447TS 3570 95.40 95.40 0.900 219.3 1227.9 1534.9 1227.9 296.0 120 220 44.130 G 1900
200 4 447T 1785 96.20 96.30 0.880 222.4 1245.4 1556.7 1245.4 592.0 140 220 73.030 G 18606 449T 1185 95.80 96.00 0.850 231.2 1257.7 1572.2 1257.7 891.8 140 220 153.550 G 2430
2502 449TS 3570 95.80 95.80 0.900 276.6 1548.9 1936.1 1548.9 375.0 120 220 58.330 G 24304 449T 1785 96.20 96.30 0.880 281.7 1577.5 1971.9 1577.5 749.9 140 220 105.370 G 2430
Motor Data SheetsHYUNDAI Crown TritonTM Series ▪ IEEE-841
MO
TOR
DATA
SHEETS
www.worldwideelectric.net ▐ HYUNDAI Parts and Maintenance14
HYUNDAI PARTS AND MAINTENANCE MANUAL
Rated Ouput
(HP)Pole Frame
Size
Characteristics at Rated Output Locked Rotor Current
Torque Moment of Inertia
WK2
(Ib.ft.2)
NEMA Code Letter
Approx.Weight
(Ibs.)
Full Load Speed (RPM)
Efficiency Power Factor Full Load Current Full Load (Ib.ft.)
Locked Rotor
(% FLT)
Break-down
(% FLT)Full Load Nom.(%)
3/4 Load (%)
Full Load (p.u.)
@ 460 V (A)
@ 575 V (A)
@ 460 V (A)
@ 575 V (A)
14 143T 1740 85.50 85.60 0.700 1.6 1.3 14.6 11.7 3.0 280 310 0.059 N 646 145T 1140 82.50 82.70 0.650 1.8 1.4 14.0 11.2 4.6 180 275 0.083 N 642 143T 3500 84.00 84.20 0.840 2.0 1.6 19.6 15.7 2.2 185 260 0.033 M 64
1.5 4 145T 1735 86.50 86.70 0.720 2.2 1.8 20.0 16.0 4.5 260 290 0.076 M 666 182T 1160 87.50 87.70 0.680 2.3 1.9 19.7 15.8 6.7 190 270 0.593 L 1122 145T 3500 85.50 85.70 0.850 2.6 2.1 24.6 19.7 3.0 180 250 0.042 L 66
2 4 145T 1735 86.50 86.70 0.730 3.0 2.4 24.7 19.8 6.1 245 280 0.078 L 666 184T 1155 88.50 88.70 0.700 3.0 2.4 24.0 19.2 9.1 180 260 0.712 L 1212 182T 3515 86.50 86.70 0.850 3.8 3.0 28.5 22.8 4.4 190 260 0.071 J 112
3 4 182T 1760 89.50 89.60 0.790 3.9 3.1 30.1 24.1 8.8 220 280 0.190 J 1126 213T 1175 89.50 89.50 0.680 4.5 3.6 32.7 26.1 13.2 180 250 0.949 K 1602 184T 3515 88.50 88.70 0.860 6.1 4.9 45.8 36.6 7.4 190 260 0.166 J 121
5 4 184T 1760 89.50 89.70 0.800 6.5 5.2 49.3 39.4 14.8 210 260 0.309 J 1216 215T 1170 89.50 89.50 0.700 7.4 5.9 50.4 40.3 22.3 170 220 1.234 K 1802 213T 3520 89.50 89.70 0.860 9.0 7.2 62.8 50.2 11.0 160 260 0.332 H 160
7.5 4 213T 1760 91.70 91.70 0.790 9.5 7.6 73.4 58.7 22.0 190 250 0.570 J 1606 254T 1175 91.00 91.10 0.740 10.3 8.2 69.7 55.8 33.0 170 250 2.136 J 3102 215T 3525 90.20 90.30 0.870 12.0 9.6 81.6 65.3 15.0 160 260 0.451 H 180
10 4 215T 1760 91.70 91.70 0.805 12.8 10.2 95.6 76.5 30.0 180 240 0.712 J 1806 256T 1175 91.00 91.10 0.750 13.8 11.0 93.8 75.0 45.0 170 250 3.086 J 3502 254T 3535 91.70 91.70 0.890 16.9 13.5 113.3 90.7 21.9 180 250 0.926 G 310
15 4 254T 1775 92.40 92.40 0.815 18.3 14.7 124.7 99.7 43.7 200 240 2.136 H 3106 284T 1175 91.70 91.80 0.760 19.8 15.8 132.7 106.2 66.0 160 240 4.984 H 4402 256T 3535 91.70 91.70 0.890 23.1 18.5 149.9 120.0 29.9 180 250 1.163 G 350
20 4 256T 1775 93.00 93.00 0.815 24.8 19.9 168.9 135.1 59.5 200 240 2.635 H 3506 286T 1175 91.70 91.80 0.770 26.7 21.3 176.0 140.8 89.9 150 230 6.100 H 4802 284TS 3560 91.70 91.70 0.890 28.5 22.8 199.2 159.3 36.6 160 230 1.899 H 440
25 4 284T 1775 93.60 93.80 0.820 30.3 24.2 205.7 164.6 73.4 170 220 3.940 H 4406 324T 1175 93.00 93.20 0.800 31.2 25.0 212.2 169.8 110.9 160 220 8.094 H 8402 286TS 3560 91.70 91.70 0.890 33.8 27.1 236.8 189.5 43.5 160 230 2.089 G 480
30 4 286T 1775 93.60 93.80 0.820 36.0 28.8 244.6 195.7 87.3 170 220 5.578 H 4806 326T 1175 93.00 93.20 0.800 37.1 29.7 252.4 201.9 131.9 160 220 10.443 H 8202 324TS 3560 92.40 92.60 0.895 45.5 36.4 296.0 236.8 59.4 160 230 3.987 G 800
40 4 324T 1780 94.10 94.10 0.820 48.8 39.0 341.6 273.3 118.7 160 220 7.121 H 8206 364T 1185 94.10 94.30 0.820 48.8 39.0 331.8 265.5 178.4 150 220 26.650 H 11132 326TS 3560 93.00 93.20 0.895 55.8 44.6 368.2 294.6 73.2 160 230 4.272 G 820
50 4 326T 1780 94.50 94.50 0.820 59.9 47.9 419.5 335.6 146.4 160 220 8.307 H 8406 365T 1185 94.10 94.30 0.820 60.2 48.1 409.3 327.4 220.0 150 220 32.000 H 11732 364TS 3570 94.10 94.10 0.915 65.6 52.5 446.1 356.8 88.8 140 220 9.280 G 1047
60 4 364T 1780 95.00 95.10 0.850 69.9 56.0 468.6 374.9 178.1 150 220 17.640 G 11136 404T 1185 94.50 94.70 0.840 71.2 56.9 476.7 381.4 267.5 140 220 46.280 G 15322 365TS 3570 94.50 94.50 0.915 79.8 63.9 542.9 434.3 108.5 140 220 11.040 G 1087
75 4 365T 1780 95.40 95.50 0.850 85.1 68.1 587.4 469.9 217.7 150 220 20.900 G 11536 405T 1185 94.50 94.70 0.840 87.0 69.6 591.3 473.1 327.0 140 220 55.310 G 18302 405TS 3570 94.50 94.50 0.905 110.1 88.1 770.5 616.4 148.0 120 220 18.450 G 1852
100 4 405T 1780 95.40 95.40 0.865 114.1 91.3 741.5 593.2 296.8 140 220 35.910 G 18306 444T 1185 95.00 95.20 0.850 116.6 93.3 792.7 634.2 445.9 140 220 73.410 G 21162 444TS 3570 95.00 95.00 0.900 139.5 111.6 976.2 781.0 187.5 120 220 27.420 G 2006
125 4 444T 1785 95.40 95.50 0.880 142.0 113.6 994.2 795.4 375.0 140 220 52.510 G 21166 445T 1185 95.00 95.20 0.850 147.7 118.1 996.7 797.4 564.8 140 220 89.860 G 22932 445TS 3570 95.00 95.00 0.900 161.5 129.2 1130.3 904.3 217.1 120 220 33.660 G 2249
150 4 445T 1785 95.80 95.90 0.880 163.8 131.0 1146.4 917.1 434.2 140 220 67.430 G 22936 447T 1185 95.80 96.00 0.850 169.5 135.6 1152.9 922.3 654.0 140 220 106.310 G 27562 447TS 3570 95.40 95.40 0.900 219.3 175.4 1534.9 1227.9 296.0 120 220 44.130 G 2690
200 4 447T 1785 96.20 96.30 0.880 222.4 177.9 1556.7 1245.4 592.0 140 220 73.030 G 27566 449T 1185 95.80 96.00 0.850 231.2 185.0 1572.2 1257.7 891.8 140 220 153.550 G 3086
2502 449TS 3570 95.80 95.80 0.900 276.6 221.3 1936.1 1548.9 375.0 120 220 58.330 G 30204 449T 1785 96.20 96.30 0.880 281.7 225.4 1971.9 1577.5 749.9 140 220 105.370 G 3086
Motor Data SheetsHYUNDAI Crown TritonTM Series ▪ Explosion Proof
MO
TOR
DAT
A S
HEE
TS
HYUNDAI Parts and Maintenance ▐ www.worldwideelectric.net 15
HYUNDAI PARTS AND MAINTENANCE MANUAL
ALL DIMENSIONS IN INCHES
Frame E 2F H BA A B C D G J P O T L S ES R N-W U AA AB AC XB XL XN
143T 2.75 4.00 0.34 2.25 6.78 6.15 13.05 3.50 0.47 1.36 7.64 7.46 1.63 6.05 0.188 1.41 0.771 2.25 0.875 0.75 6.73 5.21 1.95 4.10 4.96
145T 2.75 5.00 0.34 2.25 6.78 6.15 13.05 3.50 0.47 1.36 7.64 7.46 1.63 6.05 0.188 1.41 0.771 2.25 0.875 0.75 6.73 5.21 1.95 4.10 4.96
182T 3.75 4.50 0.41 2.75 8.66 5.52 15.52 4.50 0.62 1.74 9.64 9.32 1.63 7.78 0.250 1.78 0.986 2.75 1.125 0.75 7.47 6.23 3.03 4.35 5.35
184T 3.75 5.50 0.41 2.75 8.66 6.54 16.55 4.50 0.62 1.74 9.64 9.32 1.63 8.29 0.250 1.78 0.986 2.75 1.125 0.75 7.47 6.23 3.03 4.35 5.35
213T 4.25 5.50 0.41 3.50 9.85 6.77 18.86 5.25 0.60 1.52 11.26 11.02 1.63 9.22 0.312 2.41 1.201 3.38 1.375 1.00 8.23 7.34 3.03 4.35 5.35
215T 4.25 7.00 0.41 3.50 9.84 8.66 20.36 5.25 0.60 1.52 11.26 11.02 1.63 9.97 0.312 2.41 1.201 3.38 1.375 1.00 8.23 7.34 3.03 4.35 5.35
254T 5.00 8.25 0.53 4.25 11.30 9.56 23.13 6.25 0.72 1.93 12.76 12.75 2.01 10.75 0.375 2.91 1.416 4.00 1.625 1.25 11.88 9.08 1.66 7.56 5.35
256T 5.00 10.00 0.53 4.25 11.30 11.30 24.86 6.25 0.72 1.93 12.76 12.75 2.01 11.61 0.375 2.91 1.416 4.00 1.625 1.25 11.88 9.08 1.66 7.56 3.35
284T 5.50 9.50 0.53 4.75 12.60 11.18 26.21 7.00 0.78 2.20 14.19 14.28 2.01 12.09 0.500 3.28 1.591 4.62 1.875 1.50 12.43 9.64 2.31 7.56 5.35
284TS 5.50 9.50 0.53 4.75 12.60 11.18 24.84 7.00 0.78 2.20 14.19 14.28 2.01 12.09 0.375 1.91 1.416 3.25 1.625 1.50 12.43 9.64 2.31 7.56 3.35
286T 5.50 11.00 0.53 4.75 12.60 12.68 27.71 7.00 0.78 2.20 14.19 14.28 2.01 12.84 0.500 3.28 1.591 4.62 1.875 1.50 12.43 9.64 2.31 7.56 5.35
286TS 5.50 11.00 0.53 4.75 12.60 12.68 26.34 7.00 0.78 2.20 14.19 14.28 2.01 12.84 0.375 1.91 1.416 3.25 1.625 1.50 12.43 9.64 2.31 7.56 5.35
324T 6.25 10.50 0.66 5.25 14.33 13.78 31.07 8.00 1.11 2.36 15.84 16.19 2.41 14.57 0.500 3.91 1.845 5.25 2.125 2.00 15.20 11.21 1.57 10.16 7.01
324TS 6.25 10.50 0.66 5.25 14.33 13.78 29.57 8.00 1.11 2.36 15.84 16.19 2.41 14.57 0.500 2.03 1.591 3.75 1.875 2.00 15.20 11.21 1.57 10.16 7.01
326T 6.25 12.00 0.66 5.25 14.33 13.78 31.07 8.00 1.11 2.36 15.84 16.19 2.41 14.57 0.500 3.91 1.845 5.25 2.125 2.00 15.20 11.21 1.57 10.16 7.01
326TS 6.25 12.00 0.66 5.25 14.33 13.78 29.57 8.00 1.11 2.36 15.84 16.19 2.41 14.57 0.500 2.03 1.591 3.75 1.875 2.00 15.20 11.21 1.57 10.16 7.01
364T 7.00 11.25 0.66 5.88 16.14 14.92 34.01 9.00 0.98 2.72 18.23 18.50 2.80 16.13 0.625 4.28 2.021 5.88 2.375 3.00 17.13 13.82 2.70 10.24 7.09
364TS 7.00 11.25 0.66 5.88 16.14 14.92 31.88 9.00 0.98 2.72 18.23 18.50 2.80 16.13 0.500 2.03 1.591 3.75 1.875 2.50 17.13 13.82 2.70 10.24 7.09
365T 7.00 12.25 0.66 5.88 16.14 14.92 34.01 9.00 0.98 2.72 18.23 18.50 2.80 16.13 0.625 4.28 2.021 5.88 2.375 3.00 17.13 13.82 2.70 10.24 7.09
365TS 7.00 12.25 0.66 5.88 16.14 14.92 31.88 9.00 0.98 2.72 18.23 18.50 2.80 16.13 0.500 2.03 1.591 3.75 1.875 3.00 17.13 13.82 2.70 10.24 7.09
404T 8.00 12.25 0.81 6.62 18.43 16.46 39.42 10.00 1.18 3.03 20.16 20.79 3.55 18.68 0.750 5.65 2.450 7.25 2.875 3.00 20.28 14.85 2.83 11.65 10.63
405T 8.00 13.75 0.81 6.62 18.43 16.46 39.42 10.00 1.18 3.03 20.16 20.79 3.55 18.68 0.750 5.65 2.450 7.25 2.875 3.00 20.28 14.85 2.83 11.65 10.63
405TS 8.00 13.75 0.81 6.62 18.43 16.46 36.42 10.00 1.18 3.03 20.16 20.79 3.55 18.68 0.500 2.78 1.845 4.25 2.125 3.00 20.28 14.85 2.83 11.65 10.63
444T 9.00 14.50 0.81 7.50 20.51 19.21 45.21 11.00 1.42 3.07 22.40 23.19 4.33 20.96 0.875 6.91 2.880 8.50 3.375 3.00 21.26 18.03 3.83 11.65 10.63
444TS 9.00 14.50 0.81 7.50 20.51 19.21 41.46 11.00 1.42 3.07 22.40 23.19 4.33 20.96 0.625 3.03 2.021 4.75 2.375 3.00 21.26 18.03 3.83 11.65 10.63
445T 9.00 16.50 0.81 7.50 20.51 19.21 45.21 11.00 1.42 3.07 22.40 23.19 4.33 20.96 0.875 6.91 2.880 8.50 3.375 3.00 21.26 18.03 3.83 11.65 10.63
445TS 9.00 16.50 0.81 7.50 20.51 19.21 41.46 11.00 1.42 3.07 22.40 23.19 4.33 20.96 0.625 3.03 2.021 4.75 2.375 3.00 21.26 18.03 3.83 11.65 10.63
447T 9.00 20.00 0.81 7.50 20.51 22.72 48.71 11.00 1.42 3.07 22.40 23.19 4.33 22.71 0.875 6.91 2.880 8.50 3.375 3.00 21.26 18.03 3.83 11.65 10.63
447TS 9.00 20.00 0.81 7.50 20.51 22.72 44.96 11.00 1.42 3.07 22.40 23.19 4.33 22.71 0.625 3.03 2.021 4.75 2.375 3.00 21.26 18.03 3.83 11.654 10.63
449T 9.00 25.00 0.81 7.50 20.51 27.72 53.83 11.00 1.42 3.07 22.40 23.19 4.33 25.33 0.875 6.91 2.880 8.50 3.375 3.00 21.26 18.03 3.83 11.65 10.63
449TS 9.00 25.00 0.81 7.50 20.51 27.72 50.08 11.00 1.42 3.07 22.40 23.19 4.33 25.33 0.625 3.03 2.021 4.75 2.375 3.00 21.26 18.03 3.83 11.65 10.63
Dimensions shown in this manual are for general use only.For an exact drawing on a specific rating, please contact our sales office.
Motor DimensionsHYUNDAI Crown TritonTM Series ▪ Premium EfficiencyTEFC Enclosure ▪ Rigid Base
MO
TOR
DIM
ENSIO
NS
www.worldwideelectric.net ▐ HYUNDAI Parts and Maintenance16
HYUNDAI PARTS AND MAINTENANCE MANUAL
ALL DIMENSIONS IN INCHES
Frame E 2F1 2F2 H BA A B C D G J P O T L S ES R U
143TC 2.75 4.00 5.00 0.34 2.75 6.78 6.15 13.05 3.50 0.45 1.36 7.64 7.46 1.63 6.05 0.188 1.41 0.771 0.875
145TC 2.75 5.00 4.00 0.34 2.75 6.78 6.15 13.05 3.50 0.47 1.36 7.64 7.46 1.63 6.05 0.188 1.41 0.771 0.875
182TC 3.75 4.50 — 0.41 2.75 8.66 6.54 15.52 4.50 0.62 1.74 9.64 9.32 1.63 7.78 0.250 1.78 0.986 1.125
184TC 3.75 5.50 — 0.41 2.75 8.66 6.54 16.55 4.50 0.62 1.74 9.64 9.32 1.63 8.29 0.250 1.78 0.986 1.125
213TC 4.25 5.50 — 0.41 3.50 9.85 6.77 18.86 5.25 0.60 1.52 11.26 11.02 1.63 9.22 0.312 2.41 1.201 1.375
215TC 4.25 7.00 — 0.41 3.50 9.84 8.66 20.36 5.25 0.60 1.52 11.26 11.02 1.63 9.97 0.312 2.41 1.201 1.375
254TC 5.00 8.25 — 0.53 4.25 11.30 9.56 23.13 6.25 0.72 1.93 12.76 12.75 2.01 10.75 0.375 2.91 1.416 1.625
256TC 5.00 10.00 — 0.53 4.25 11.30 11.30 24.86 6.25 0.72 1.93 12.76 12.75 2.01 11.61 0.375 2.91 1.416 1.625
284TC 5.50 9.50 — 0.53 4.75 12.60 11.18 26.21 7.00 0.78 2.20 14.19 14.28 2.01 12.09 0.500 3.28 1.591 1.875
284TSC 5.50 9.50 — 0.53 4.75 12.60 11.18 24.84 7.00 0.78 2.20 14.19 14.28 2.01 12.09 0.375 1.91 1.416 1.625
286TC 5.50 11.00 — 0.53 4.75 12.60 12.68 27.71 7.00 0.78 2.20 14.19 14.28 2.01 12.84 0.500 3.28 1.591 1.875
286TSC 5.50 11.00 — 0.53 4.75 12.60 12.68 26.34 7.00 0.78 2.20 14.19 14.28 2.01 12.84 0.375 1.91 1.416 1.625
324TC 6.25 10.50 12.00 0.66 5.25 14.33 13.78 31.07 8.00 1.11 2.36 15.84 16.19 2.41 14.57 0.500 3.91 1.845 2.125
326TC 6.25 12.00 10.50 0.66 5.25 14.33 13.78 31.07 8.00 1.11 2.36 15.84 16.19 2.41 14.57 0.500 3.91 1.845 2.125
364TC 7.00 11.25 12.25 0.66 5.88 16.14 14.92 34.01 9.00 0.98 2.72 17.75 18.50 2.80 16.13 0.625 4.28 2.021 2.375
365TC 7.00 12.25 11.25 0.66 5.88 16.14 14.92 34.01 9.00 0.98 2.72 17.75 18.50 2.80 16.13 0.625 4.28 2.021 2.375
365TSC 7.00 12.25 11.25 0.66 5.88 16.14 14.92 31.88 9.00 0.98 2.72 17.75 18.50 2.80 16.13 0.500 2.03 1.591 1.875
404TC 8.00 12.25 13.75 0.81 6.62 18.43 16.46 39.42 10.00 1.18 3.03 19.69 20.79 3.55 18.68 0.750 5.65 2.450 2.875
405TC 8.00 13.75 12.25 0.81 6.62 18.43 16.46 39.42 10.00 1.18 3.03 19.69 20.79 3.55 18.68 0.750 5.65 2.450 2.875
405TSC 8.00 13.75 12.25 0.81 6.62 18.43 16.46 36.42 10.00 1.18 3.03 19.69 20.79 3.55 18.68 0.500 2.78 1.845 2.125
444TC 9.00 14.50 16.50 0.81 7.50 20.51 19.21 45.21 11.00 1.42 3.07 22.44 23.19 4.33 20.96 0.875 6.91 2.880 3.375
444TSC 9.00 14.50 16.50 0.81 7.50 20.51 19.21 41.46 11.00 1.42 3.07 22.44 23.19 4.33 20.96 0.625 3.03 2.021 2.375
445TC 9.00 16.50 14.50 0.81 7.50 20.51 19.21 45.21 11.00 1.42 3.07 22.44 23.19 4.33 20.96 0.875 6.91 2.880 3.375
445TSC 9.00 16.50 14.50 0.81 7.50 20.51 19.21 41.46 11.00 1.42 3.07 22.44 23.19 4.33 20.96 0.625 3.03 2.021 2.375
447TC 9.00 20.00 — 0.81 7.50 20.51 22.72 48.71 11.00 1.42 3.07 22.44 23.19 4.33 22.71 0.875 6.91 2.880 3.375
447TSC 9.00 20.00 — 0.81 7.50 20.51 22.72 44.96 11.00 1.42 3.07 22.44 23.19 4.33 22.71 0.625 3.03 2.021 2.375
449TC 9.00 25.00 20.00 0.81 7.50 20.51 27.72 53.83 11.00 1.42 3.07 22.44 23.19 4.33 25.33 0.875 6.91 2.880 3.375
Motor DimensionsHYUNDAI Crown TritonTM Series ▪ Premium EfficiencyTEFC Enclosure ▪ C-Face
Dimensions shown in this manual are for general use only.For an exact drawing on a specific rating, please contact our sales office.
MO
TOR
DIM
ENSI
ON
S
HYUNDAI Parts and Maintenance ▐ www.worldwideelectric.net 17
HYUNDAI PARTS AND MAINTENANCE MANUAL
ALL DIMENSIONS IN INCHES
Frame AA AB AC XB XL XN AJ AK BD BB BC AH BF n
143TC 0.75 6.73 5.21 1.95 4.10 4.96 5.875 4.50 6.50 0.16 0.12 2.12 3/8 - 16 4
145TC 0.75 6.73 5.21 1.95 4.10 4.96 5.875 4.50 6.50 0.16 0.12 2.12 3/8 - 16 4
182TC 0.75 7.47 6.23 3.03 4.35 5.35 7.250 8.50 8.70 0.25 0.12 2.62 1/2 - 13 4
184TC 0.75 7.47 6.23 2.29 4.35 5.35 7.250 8.50 8.70 0.25 0.12 2.62 1/2 - 13 4
213TC 1.00 8.23 7.34 3.03 4.35 5.35 7.250 8.50 9.00 0.25 0.25 3.12 1/2 - 13 4
215TC 1.00 8.23 7.34 3.03 4.35 5.35 7.250 8.50 9.00 0.25 0.25 3.12 1/2 - 13 4
254TC 1.25 11.88 9.08 1.66 7.56 5.35 7.250 8.50 9.68 0.25 0.25 3.75 1/2 - 13 4
256TC 1.25 11.88 9.08 1.66 7.56 3.35 7.250 8.50 9.68 0.25 0.25 3.75 1/2 - 13 4
284TC 1.50 12.43 9.64 2.31 7.56 5.35 9.000 10.50 10.90 0.25 0.25 4.38 1/2 - 13 4
284TSC 1.50 12.43 9.64 2.31 7.56 3.35 9.000 10.50 10.90 0.25 0.25 3.00 1/2 - 13 4
286TC 1.50 12.43 9.64 2.31 7.56 5.35 9.000 10.50 10.90 0.25 0.25 4.38 1/2 - 13 4
286TSC 1.50 12.43 9.64 2.31 7.56 5.35 9.000 10.50 10.90 0.25 0.25 3.00 1/2 - 13 4
324TC 2.00 15.20 11.21 1.57 10.16 7.01 11.000 12.50 13.27 0.25 0.25 5.00 5/8 - 11 4
326TC 2.00 15.20 11.21 1.57 10.16 7.01 11.000 12.50 13.27 0.25 0.25 5.00 5/8 - 11 4
364TC 3.00 17.13 13.82 2.70 10.24 7.09 11.000 12.50 13.38 0.25 0.25 5.62 5/8 - 11 8
365TC 3.00 17.13 13.82 2.70 10.24 7.09 11.000 12.50 13.38 0.25 0.25 5.62 5/8 - 11 8
365TSC 3.00 17.13 13.82 2.70 10.24 7.09 11.000 12.50 13.78 0.25 0.25 3.50 5/8 - 11 8
404TC 3.00 20.28 14.85 2.83 11.65 10.63 11.000 12.50 13.78 0.25 0.25 7.00 5/8 - 11 8
405TC 3.00 20.28 14.85 2.83 11.65 10.63 11.000 12.50 13.78 0.25 0.25 7.00 5/8 - 11 8
405TSC 3.00 20.28 14.85 2.83 11.65 10.63 11.000 12.50 13.78 0.25 0.25 4.00 5/8 - 11 8
444TC 3.00 21.26 18.03 3.83 11.65 10.63 14.000 16.00 16.93 0.25 0.25 8.25 5/8 - 11 8
444TSC 3.00 21.26 18.03 3.83 11.65 10.63 14.000 16.00 16.93 0.25 0.25 4.50 5/8 - 11 8
445TC 3.00 21.26 18.03 3.83 11.65 10.63 14.000 16.00 16.93 0.25 0.25 8.25 5/8 - 11 8
445TSC 3.00 21.26 18.03 3.83 11.65 10.63 14.000 16.00 16.93 0.25 0.25 4.50 5/8 - 11 8
447TC 3.00 21.26 18.03 3.83 11.65 10.63 14.000 16.00 16.93 0.25 0.25 8.25 5/8 - 11 8
447TSC 3.00 21.26 18.03 3.83 11.654 10.63 14.000 16.00 16.93 0.25 0.25 4.50 5/8 - 11 8
449TC 3.00 21.26 18.03 3.83 11.65 10.63 14.000 16.00 16.93 0.25 0.25 8.25 5/8 - 11 8
Motor DimensionsHYUNDAI Crown TritonTM Series ▪ Premium EfficiencyTEFC Enclosure ▪ C-Face
Dimensions shown in this manual are for general use only.For an exact drawing on a specific rating, please contact our sales office.
MO
TOR
DIM
ENSIO
NS
www.worldwideelectric.net ▐ HYUNDAI Parts and Maintenance18
HYUNDAI PARTS AND MAINTENANCE MANUAL
Motor DimensionsHYUNDAI Crown TritonTM Series ▪ IEEE-841TEFC Enclosure ▪ Rigid Base
ALL DIMENSIONS IN INCHES
Frame E 2F H BA A B C D G J P O T L S ES R N-W U AA AB AC XB XL XN
143T 2.75 4.00 0.34 2.25 6.78 6.15 13.05 3.50 0.47 1.36 7.64 7.46 1.63 6.05 0.188 1.41 0.771 2.25 0.875 0.75 7.02 5.34 1.53 5.26 4.61
145T 2.75 5.00 0.34 2.25 6.78 6.15 13.05 3.50 0.47 1.36 7.64 7.46 1.63 6.05 0.188 1.41 0.771 2.25 0.875 0.75 7.02 5.34 1.53 5.26 4.61
182T 3.75 4.50 0.41 2.75 8.66 5.52 15.09 4.50 0.62 1.74 9.64 9.32 1.63 7.64 0.250 1.78 0.986 2.75 1.125 0.75 9.06 7.14 1.93 5.97 5.71
184T 3.75 5.50 0.41 2.75 8.66 6.54 16.12 4.50 0.62 1.74 9.64 9.32 1.63 7.85 0.250 1.78 0.986 2.75 1.125 0.75 9.06 7.14 1.93 5.97 5.71
213T 4.25 5.50 0.41 3.50 9.85 6.77 18.86 5.25 0.60 1.52 11.26 11.02 1.63 9.22 0.312 2.41 1.201 3.38 1.375 1.00 9.82 7.90 2.67 5.97 5.71
215T 4.25 7.00 0.41 3.50 9.84 8.66 20.36 5.25 0.60 1.52 11.26 11.02 1.63 9.97 0.312 2.41 1.201 3.38 1.375 1.00 9.82 7.90 2.67 5.97 5.71
254T 5.00 8.25 0.53 4.25 11.30 9.56 24.93 6.25 0.72 1.93 12.76 12.75 2.01 11.68 0.375 2.91 1.416 4.00 1.625 1.25 11.88 9.08 2.63 7.56 6.61
256T 5.00 10.00 0.53 4.25 11.30 11.30 24.93 6.25 0.72 1.93 12.76 12.75 2.01 11.68 0.375 2.91 1.416 4.00 1.625 1.25 11.88 9.08 2.63 7.56 6.61
284T 5.50 9.50 0.53 4.75 12.60 11.18 24.93 7.00 0.78 2.20 14.19 14.28 2.01 11.68 0.500 3.28 1.591 4.62 1.875 1.50 12.43 9.64 3.42 7.56 6.61
284TS 5.50 9.50 0.53 4.75 12.60 11.18 26.28 7.00 0.78 2.20 14.19 14.28 2.01 12.16 0.375 1.91 1.416 3.25 1.625 1.50 12.43 9.64 3.42 7.56 6.61
286T 5.50 11.00 0.53 4.75 12.60 12.68 26.28 7.00 0.78 2.20 14.19 14.28 2.01 12.16 0.500 3.28 1.591 4.62 1.875 1.50 12.43 9.64 3.42 7.56 6.61
286TS 5.50 11.00 0.53 4.75 12.60 12.68 26.28 7.00 0.78 2.20 14.19 14.28 2.01 12.16 0.375 1.91 1.416 3.25 1.625 1.50 12.43 9.64 3.42 7.56 6.61
324T 6.25 10.50 0.66 5.25 14.33 13.78 32.90 8.00 1.11 2.36 15.84 16.19 2.41 14.90 0.500 3.91 1.845 5.25 2.125 2.00 15.20 11.21 1.57 10.16 7.01
324TS 6.25 10.50 0.66 5.25 14.33 13.78 31.40 8.00 1.11 2.36 15.84 16.19 2.41 14.90 0.500 2.03 1.591 3.75 1.875 2.00 15.20 11.21 1.57 10.16 7.01
326T 6.25 12.00 0.66 5.25 14.33 13.78 32.90 8.00 1.11 2.36 15.84 16.19 2.41 14.90 0.500 3.91 1.845 5.25 2.125 2.00 15.20 11.21 1.57 10.16 7.01
326TS 6.25 12.00 0.66 5.25 14.33 13.78 31.40 8.00 1.11 2.36 15.84 16.19 2.41 14.90 0.500 2.03 1.591 3.75 1.875 2.00 15.20 11.21 1.57 10.16 7.01
364T 7.00 11.25 0.66 5.88 16.14 14.92 35.20 9.00 0.98 2.72 18.23 18.50 2.80 17.32 0.625 4.28 2.021 5.88 2.375 3.00 17.13 13.82 2.70 10.24 7.09
364TS 7.00 11.25 0.66 5.88 16.14 14.92 33.06 9.00 0.98 2.72 18.23 18.50 2.80 17.32 0.500 2.03 1.591 3.75 1.875 3.00 17.13 13.18 2.70 10.24 7.09
365T 7.00 12.25 0.66 5.88 16.14 14.92 35.20 9.00 0.98 2.72 18.23 18.50 2.80 17.32 0.625 4.28 2.021 5.88 2.375 3.00 17.13 13.82 2.70 10.24 7.09
365TS 7.00 12.25 0.66 5.88 16.14 14.92 33.06 9.00 0.98 2.72 18.23 18.50 2.80 17.32 0.500 2.03 1.591 3.75 1.875 3.00 17.13 13.18 2.70 10.24 7.09
404T 8.00 12.25 0.81 6.62 18.43 16.46 41.01 10.00 1.18 3.03 20.16 20.79 3.55 20.57 0.750 5.65 2.450 7.25 2.875 3.00 20.28 14.85 2.83 11.65 10.63
405T 8.00 13.75 0.81 6.62 18.43 16.46 41.01 10.00 1.18 3.03 20.16 20.79 3.55 20.57 0.750 5.65 2.450 7.25 2.875 3.00 20.28 14.85 2.83 11.65 10.63
405TS 8.00 13.75 0.81 6.62 18.43 16.46 38.00 10.00 1.18 3.03 20.16 20.79 3.55 20.57 0.500 2.78 1.845 4.25 2.125 3.00 20.28 14.85 2.83 11.65 10.63
444T 9.00 14.50 0.81 7.50 20.51 19.21 46.45 11.00 1.42 3.07 22.40 23.19 4.33 22.22 0.875 6.91 2.880 8.50 3.375 3.00 21.26 18.03 3.83 11.65 10.63
444TS 9.00 14.50 0.81 7.50 20.51 19.21 47.15 11.00 1.42 3.07 22.40 23.19 4.33 26.67 0.625 3.03 2.021 4.75 2.375 3.00 21.26 18.03 3.83 11.65 10.63
445T 9.00 16.50 0.81 7.50 20.51 19.21 46.78 11.00 1.42 3.07 22.40 23.19 4.33 22.55 0.875 6.91 2.880 8.50 3.375 3.00 21.26 18.03 3.83 11.65 10.63
445TS 9.00 16.50 0.81 7.50 20.51 19.21 47.15 11.00 1.42 3.07 22.40 23.19 4.33 26.67 0.625 3.03 2.021 4.75 2.375 3.00 21.26 18.03 3.83 11.65 10.63
447T 9.00 20.00 0.81 7.50 20.51 22.72 50.29 11.00 1.42 3.07 22.40 23.19 4.33 24.30 0.875 6.91 2.880 8.50 3.375 3.00 23.78 20.70 3.14 16.30 13.78
447TS 9.00 20.00 0.81 7.50 20.51 22.72 50.65 11.00 1.42 3.07 22.40 23.19 4.33 28.43 0.625 3.03 2.021 4.75 2.375 3.00 23.78 20.70 3.14 16.30 13.78
449T 9.00 25.00 0.81 7.50 20.51 27.72 53.83 11.00 1.42 3.07 22.40 23.19 4.33 26.92 0.875 6.91 2.880 8.50 3.375 3.00 23.78 20.70 3.14 16.30 13.78
449TS 9.00 25.00 0.81 7.50 20.51 27.72 55.77 11.00 1.42 3.07 22.40 23.19 4.33 30.98 0.625 3.03 2.021 4.75 2.375 3.00 23.78 20.70 3.14 16.30 13.78
Dimensions shown in this manual are for general use only.For an exact drawing on a specific rating, please contact our sales office.
MO
TOR
DIM
ENSI
ON
S
HYUNDAI Parts and Maintenance ▐ www.worldwideelectric.net 19
HYUNDAI PARTS AND MAINTENANCE MANUAL
Dimensions shown in this manual are for general use only.For an exact drawing on a specific rating, please contact our sales office.
Motor DimensionsHYUNDAI Crown TritonTM Series ▪ IEEE-841 TEFC Enclosure ▪ C-Face
ALL DIMENSIONS IN INCHES
Frame E 2F1 2F2 H BA A B C D G J P O T L S ES R U
143TC 2.75 4.00 5.00 0.34 2.75 6.78 6.15 13.05 3.50 0.47 1.36 7.64 7.46 1.63 6.05 0.188 1.41 0.771 0.875
145TC 2.75 5.00 4.00 0.34 2.75 6.78 6.15 13.05 3.50 0.47 1.36 7.64 7.46 1.63 6.05 0.188 1.41 0.771 0.875
182TC 3.75 4.50 — 0.41 3.50 8.66 5.52 15.09 4.50 0.62 1.74 9.64 9.32 1.63 7.64 0.250 1.78 0.986 1.125
184TC 3.75 5.50 — 0.41 3.50 8.66 6.54 16.12 4.50 0.62 1.74 9.64 9.32 1.63 7.85 0.250 1.78 0.986 1.125
213TC 4.25 5.50 — 0.41 4.25 9.85 6.77 18.86 5.25 0.60 1.52 11.26 11.02 1.63 9.22 0.312 2.41 1.201 1.375
215TC 4.25 7.00 — 0.41 4.25 9.84 8.66 20.36 5.25 0.60 1.52 11.26 11.02 1.63 9.97 0.312 2.41 1.201 1.375
254TC 5.00 8.25 — 053 4.75 11.30 9.56 24.93 6.25 0.72 1.93 12.76 12.75 2.01 11.68 0.375 2.91 1.416 1.625
256TC 5.00 10.00 — 0.53 4.75 11.30 11.30 24.93 6.25 0.72 1.93 12.76 12.75 2.01 11.68 0.375 2.91 1.416 1.625
284TC 5.50 9.50 — 0.53 4.75 12.60 11.18 24.93 7.00 0.78 2.20 14.19 14.28 2.01 11.68 0.500 3.28 1.591 1.875
284TSC 5.50 9.50 — 0.53 4.75 12.60 11.18 26.28 7.00 0.78 2.20 14.19 14.28 2.01 12.16 0.375 1.91 1.416 1.625
286TC 5.50 11.00 — 0.53 4.75 12.60 12.68 26.28 7.00 0.78 2.20 14.19 14.28 2.01 12.16 0.500 3.28 1.591 1.875
286TSC 5.50 11.00 — 0.53 4.75 12.60 12.68 26.28 7.00 0.78 2.20 14.19 14.28 2.01 12.16 0.375 1.91 1.416 1.625
324TC 6.25 10.50 12.00 0.66 5.25 14.33 13.78 32.90 8.00 1.11 2.36 15.84 16.19 2.41 14.90 0.500 3.91 1.845 2.125
324TSC 6.25 10.50 12.00 0.66 5.25 14.33 13.78 32.90 8.00 1.11 2.36 15.84 16.19 2.41 14.90 0.500 2.03 1.591 1.875
326TC 6.25 12.00 10.50 0.66 5.25 14.33 13.78 32.90 8.00 1.11 2.36 15.84 16.19 2.41 14.90 0.500 3.91 1.845 2.125
326TSC 6.25 12.00 10.50 0.66 5.25 14.33 13.78 32.90 8.00 1.11 2.36 15.84 16.19 2.41 14.90 0.500 2.03 1.591 1.875
364TC 7.00 11.25 12.25 0.66 5.88 16.14 14.92 35.20 9.00 0.98 2.72 18.23 18.50 2.80 17.32 0.625 4.28 2.021 2.375
365TC 7.00 12.25 11.25 0.66 5.88 16.14 14.92 35.20 9.00 0.98 2.72 18.23 18.50 2.80 17.32 0.625 4.28 2.021 2.375
405TC 8.00 13.75 12.25 0.81 5.88 18.43 16.46 41.01 10.00 1.18 3.03 20.16 20.79 3.55 20.57 0.750 5.65 2.450 2.875
MO
TOR
DIM
ENSIO
NS
www.worldwideelectric.net ▐ HYUNDAI Parts and Maintenance20
HYUNDAI PARTS AND MAINTENANCE MANUAL
ALL DIMENSIONS IN INCHES
Frame AA AB AC XB XL XN AJ AK BD BB BC AH BF n
143TC 0.75 7.02 5.34 1.53 5.26 4.61 5.875 4.50 6.50 0.16 0.12 2.12 3/8 - 16 4
145TC 0.75 7.02 5.34 1.53 5.26 4.61 5.875 4.50 6.50 0.16 0.12 2.12 3/8 - 16 4
182TC 0.75 9.06 7.14 1.93 5.97 5.71 7.250 8.50 8.70 0.25 0.12 2.62 1/2 - 13 4
184TC 0.75 9.06 7.14 1.93 5.97 5.71 7.250 8.50 8.70 0.25 0.12 2.62 1/2 - 13 4
213TC 1.00 9.82 7.90 2.67 5.97 5.71 7.250 8.50 9.00 0.25 0.25 3.12 1/2 - 13 4
215TC 1.00 9.82 7.90 2.67 5.97 5.71 7.250 8.50 9.00 0.25 0.25 3.12 1/2 - 13 4
254TC 1.25 11.88 9.08 2.63 7.56 6.61 7.250 8.50 9.68 0.25 0.25 3.75 1/2 - 13 4
256TC 1.25 11.88 9.08 2.63 7.56 6.61 7.250 8.50 9.68 0.25 0.25 3.75 1/2 - 13 4
284TC 1.50 12.43 9.64 3.42 7.56 6.61 9.000 10.50 10.90 0.25 0.25 4.38 1/2 - 13 4
284TSC 1.50 12.43 9.64 3.42 7.56 6.61 9.000 10.50 10.90 0.25 0.25 3.00 1/2 - 13 4
286TC 1.50 12.43 9.64 3.42 7.56 6.61 9.000 10.50 10.90 0.25 0.25 4.38 1/2 - 13 4
286TSC 1.50 12.43 9.64 3.42 7.56 6.61 9.000 10.50 10.90 0.25 0.25 3.00 1/2 - 13 4
324TC 2.00 15.20 11.21 1.57 10.16 7.01 11.000 12.50 13.27 0.25 0.25 5.00 5/8 - 11 4
324TSC 2.00 15.20 11.21 1.57 10.16 7.01 11.000 12.50 13.27 0.25 0.25 3.50 5/8 - 11 4
326TC 2.00 15.20 11.21 1.57 10.16 7.01 11.000 12.50 13.27 0.25 0.25 5.00 5/8 - 11 4
326TSC 2.00 15.20 11.21 1.57 10.16 7.01 11.000 12.50 13.27 0.25 0.25 3.50 5/8 - 11 4
364TC 3.00 17.13 13.82 2.70 10.24 7.09 11.000 12.50 13.38 0.25 0.25 5.62 5/8 - 11 8
365TC 3.00 17.13 13.82 2.70 10.24 7.09 11.000 12.50 13.38 0.25 0.25 5.62 5/8 - 11 8
405TC 3.00 20.28 14.85 2.83 11.65 10.63 11.000 12.50 13.78 0.25 0.25 7.00 5/8 - 11 8
Motor DimensionsHYUNDAI Crown TritonTM Series ▪ IEEE-841 TEFC Enclosure ▪ C-Face
Dimensions shown in this manual are for general use only.For an exact drawing on a specific rating, please contact our sales office.
MO
TOR
DIM
ENSI
ON
S
HYUNDAI Parts and Maintenance ▐ www.worldwideelectric.net 21
HYUNDAI PARTS AND MAINTENANCE MANUAL
Dimensions shown in this manual are for general use only.For an exact drawing on a specific rating, please contact our sales office.
Motor DimensionsHYUNDAI Crown TritonTM Series ▪ Explosion ProofTEXP Enclosure ▪ Rigid Base
ALL DIMENSIONS IN INCHES
Frame E 2F H BA A B C D G J P O T L S ES R N-W U AA AB AC XB XL XN
143T 2.75 4.00 0.34 2.25 6.78 6.15 13.05 3.50 0.47 1.36 7.64 7.46 1.63 6.05 0.188 1.41 0.771 2.25 0.875 0.75 8.39 5.59 — 6.69 5.98
145T 2.75 5.00 0.34 2.25 6.78 6.15 13.05 3.50 0.47 1.36 7.64 7.46 1.63 6.05 0.188 1.41 0.771 2.25 0.875 0.75 8.39 5.59 — 6.69 5.98
182T 3.75 4.50 0.41 2.75 8.66 5.52 15.52 4.50 0.62 1.74 9.64 9.32 1.63 7.78 0.250 1.78 0.986 2.75 1.125 0.75 9.38 6.58 — 6.69 5.98
184T 3.75 5.50 0.41 2.75 8.66 6.54 16.55 4.50 0.62 1.74 9.64 9.32 1.63 8.29 0.250 1.78 0.986 2.75 1.125 0.75 9.38 6.58 — 6.69 5.98
213T 4.25 5.50 0.41 3.50 9.85 6.77 18.86 5.25 0.60 1.52 11.26 11.02 1.63 9.22 0.312 2.41 1.201 3.38 1.375 1.00 10.15 7.35 — 6.69 5.98
215T 4.25 7.00 0.41 3.50 9.84 8.66 20.36 5.25 0.60 1.52 11.26 11.02 1.63 9.97 0.312 2.41 1.201 3.38 1.375 1.00 10.15 7.35 — 6.69 5.98
254T 5.00 8.25 0.53 4.25 11.30 9.56 23.13 6.25 0.72 1.93 12.76 12.75 2.01 10.75 0.375 2.91 1.416 4.00 1.625 1.25 12.01 9.51 3.15 6.30 7.32
256T 5.00 10.00 0.53 4.25 11.30 11.30 24.86 6.25 0.72 1.93 12.76 12.75 2.01 11.61 0.375 2.91 1.416 4.00 1.625 1.25 12.01 9.51 3.15 6.30 7.32
284T 5.50 9.50 0.53 4.75 12.60 11.18 26.21 7.00 0.78 2.20 14.19 14.28 2.01 12.09 0.500 3.28 1.591 4.62 1.875 1.50 12.60 10.10 3.94 6.30 7.32
284TS 5.50 9.50 0.53 4.75 12.60 11.18 24.84 7.00 0.78 2.20 14.19 14.28 2.01 12.09 0.375 1.91 1.416 3.25 1.625 1.50 12.60 10.10 3.94 6.30 7.32
286T 5.50 11.00 0.53 4.75 12.60 12.68 27.71 7.00 0.78 2.20 14.19 14.28 2.01 12.84 0.500 3.28 1.591 4.62 1.875 1.50 12.60 10.10 3.94 6.30 7.32
286TS 5.50 11.00 0.53 4.75 12.60 12.68 26.34 7.00 0.78 2.20 14.19 14.28 2.01 12.84 0.375 1.91 1.416 3.25 1.625 1.50 12.60 10.10 3.94 6.30 7.32
324T 6.25 10.50 0.66 5.25 14.33 15.74 33.03 8.00 1.11 2.36 15.84 16.19 2.41 15.55 0.500 3.91 1.845 5.25 2.125 2.00 15.27 11.02 3.94 7.87 11.26
324TS 6.25 10.50 0.66 5.25 14.33 15.74 31.53 8.00 1.11 2.36 15.84 16.19 2.41 15.55 0.500 2.03 1.591 3.75 1.875 2.00 15.27 11.02 3.94 7.87 11.26
326T 6.25 12.00 0.66 5.25 14.33 15.74 33.03 8.00 1.11 2.36 15.84 16.19 2.41 15.55 0.500 3.91 1.845 5.25 2.125 2.00 15.27 11.02 3.94 7.87 11.26
326TS 6.25 12.00 0.66 5.25 14.33 15.74 31.53 8.00 1.11 2.36 15.84 16.19 2.41 15.55 0.500 2.03 1.591 3.75 1.875 2.00 15.27 11.02 3.94 7.87 11.26
364T 7.00 11.25 0.66 5.88 15.98 14.41 34.38 9.00 0.98 2.44 18.03 18.70 2.80 16.51 0.625 4.28 2.021 5.88 2.375 3.00 18.89 14.37 2.24 12.28 10.86
364TS 7.00 11.25 0.66 5.88 15.98 14.41 32.25 9.00 0.98 2.44 18.03 18.70 2.80 16.51 0.500 2.03 1.591 3.75 1.875 3.00 18.89 14.37 2.24 12.28 10.86
365T 7.00 12.25 0.66 5.88 15.98 14.41 34.38 9.00 0.98 2.44 18.03 18.70 2.80 16.51 0.625 4.28 2.021 5.88 2.375 3.00 18.89 14.37 2.24 12.28 10.86
365TS 7.00 12.25 0.66 5.88 15.98 14.41 32.25 9.00 0.98 2.44 18.03 18.70 2.80 16.51 0.500 2.03 1.591 3.75 1.875 3.00 18.89 14.37 2.24 12.28 10.86
404T 8.00 12.25 0.81 6.62 18.11 15.98 39.33 10.00 1.18 2.59 20.00 20.94 3.55 18.60 0.750 5.65 2.450 7.25 2.875 3.00 22.83 17.32 2.16 15.35 13.97
405T 8.00 13.75 0.81 6.62 18.11 15.98 39.33 10.00 1.18 2.59 20.00 20.94 3.55 18.60 0.750 5.65 2.450 7.25 2.875 3.00 22.83 17.32 2.16 15.35 13.97
405TS 8.00 13.75 0.81 6.62 18.11 15.98 36.33 10.00 1.18 2.59 20.00 20.94 3.55 18.60 0.500 2.78 1.845 4.25 2.125 3.00 22.83 17.32 2.16 15.35 13.97
444T 9.00 14.50 0.81 7.50 20.00 18.81 45.15 11.00 1.53 2.56 21.97 23.38 4.33 20.92 0.875 6.91 2.880 8.50 3.375 3.00 24.01 18.30 3.34 15.35 13.97
444TS 9.00 14.50 0.81 7.50 20.00 18.81 41.40 11.00 1.53 2.56 21.97 23.38 4.33 20.92 0.625 3.03 2.021 4.75 2.375 3.00 24.01 18.30 3.34 15.35 13.97
445T 9.00 16.50 0.81 7.50 20.00 18.81 45.15 11.00 1.53 2.56 21.97 23.38 4.33 20.92 0.875 6.91 2.880 8.50 3.375 3.00 24.01 18.30 3.34 15.35 13.97
445TS 9.00 16.50 0.81 7.50 20.00 18.81 41.40 11.00 1.53 2.56 21.97 23.38 4.33 20.92 0.625 3.03 2.021 4.75 2.375 3.00 24.01 18.30 3.34 15.35 13.97
447T 9.00 20.00 0.81 7.50 20.00 27.28 54.32 11.00 1.53 2.56 21.97 23.38 4.33 20.92 0.875 6.91 2.880 8.50 3.375 3.00 24.01 18.30 3.34 15.35 13.97
447TS 9.00 20.00 0.81 7.50 20.00 27.28 50.57 11.00 1.53 2.56 21.97 23.38 4.33 20.92 0.625 3.03 2.021 4.75 2.375 3.00 24.01 18.30 3.34 15.35 13.97
449T 9.00 25.00 0.81 7.50 20.00 27.28 54.32 11.00 1.53 2.56 21.97 23.38 4.33 20.92 0.875 6.91 2.880 8.50 3.375 3.00 24.01 18.30 3.34 15.35 13.97
449TS 9.00 25.00 0.81 7.50 20.00 27.28 50.57 11.00 1.53 2.56 21.97 23.38 4.33 20.92 0.625 3.03 2.021 4.75 2.375 3.00 24.01 18.30 3.34 15.35 13.97
MO
TOR
DIM
ENSIO
NS
www.worldwideelectric.net ▐ HYUNDAI Parts and Maintenance22
HYUNDAI PARTS AND MAINTENANCE MANUAL
Motor DimensionsHYUNDAI Crown TritonTM Series ▪ Explosion Proof TEXP Enclosure ▪ C-Face
ALL DIMENSIONS IN INCHES
Frame E 2F H BA A B C D G J P O T L S ES R U
145TC 2.75 5.00 0.34 2.75 6.78 6.15 13.05 3.50 0.47 1.36 7.64 7.46 1.63 6.05 0.188 1.41 0.771 0.875
182TC 3.75 4.50 0.41 2.75 8.66 5.52 15.52 4.50 0.62 1.74 9.64 9.32 1.63 7.78 0.250 1.78 0.986 1.125
184TC 3.75 5.50 0.41 2.75 8.66 6.54 16.55 4.50 0.62 1.74 9.64 9.32 1.63 8.29 0.250 1.78 0.986 1.125
213TC 4.25 5.50 0.41 3.50 9.85 6.77 18.86 5.25 0.60 1.52 11.26 11.02 1.63 9.22 0.312 2.41 1.201 1.375
215TC 4.25 7.50 0.41 3.50 9.84 8.66 20.36 5.25 0.60 1.52 11.26 11.02 1.63 9.97 0.312 2.41 1.201 1.375
254TC 5.00 8.25 0.53 4.25 11.30 9.56 23.13 6.25 0.72 1.93 12.76 12.75 2.01 10.75 0.375 2.91 1.416 1.625
256TC 5.00 10.00 0.53 4.25 11.30 11.30 24.86 6.25 0.72 1.93 12.76 12.75 2.01 11.61 0.375 2.91 1.416 1.625
284TC 5.50 9.50 0.53 4.75 12.60 11.18 26.21 7.00 0.78 2.20 14.19 14.28 2.01 12.09 0.500 3.28 1.519 1.875
286TC 5.50 11.00 0.53 4.75 12.60 12.68 27.71 7.00 0.78 2.20 14.19 4.28 2.01 12.84 0.500 3.28 1.591 1.875
324TC 6.25 10.50 0.66 5.25 14.33 15.74 33.03 8.00 1.11 2.35 15.84 16.19 2.41 15.55 0.500 3.91 1.845 2.125
326TC 6.25 12.00 0.66 5.25 14.33 15.74 33.03 8.00 1.11 2.36 15.84 16.19 2.41 15.55 0.500 3.91 1.845 2.125
364TC 7.00 11.25 0.66 5.88 15.98 14.41 34.38 9.00 0.98 2.44 18.03 18.70 2.80 16.51 0.625 4.28 2.021 2.375
365TC 7.00 12.25 0.66 5.88 15.98 14.41 34.38 9.00 0.98 2.44 18.03 18.70 2.80 16.51 0.625 4.28 2.021 2.375
365TSC 7.00 12.25 0.66 5.88 15.98 14.41 34.01 9.00 0.98 2.44 18.03 18.70 2.80 16.51 0.500 2.03 1.591 1.875
405TC 8.00 13.75 0.81 6.62 18.11 15.98 39.33 10.00 1.18 2.59 20.00 20.94 3.55 18.60 0.750 5.65 2.450 2.875
405TSC 8.00 13.75 0.81 6.62 18.11 15.98 36.33 10.00 1.18 2.59 20.00 20.94 3.55 18.60 0.500 2.78 1.845 2.125
Dimensions shown in this manual are for general use only.For an exact drawing on a specific rating, please contact our sales office.
MO
TOR
DIM
ENSI
ON
S
HYUNDAI Parts and Maintenance ▐ www.worldwideelectric.net 23
HYUNDAI PARTS AND MAINTENANCE MANUAL
Dimensions shown in this manual are for general use only.For an exact drawing on a specific rating, please contact our sales office.
Motor DimensionsHYUNDAI Crown TritonTM Series ▪ Explosion Proof TEXP Enclosure ▪ C-Face
ALL DIMENSIONS IN INCHES
Frame AA AB AC XB XL XN AJ AK BD BB BC AH BF n
145TC 0.75 8.39 5.59 — 6.69 5.98 5.875 4.50 6.57 0.16 0.12 2.12 3/8 - 16 4
182TC 0.75 9.38 6.58 — 6.69 5.98 7.250 8.50 8.70 0.25 0.12 2.62 1/2 - 13 4
184TC 0.75 9.38 6.58 — 6.69 5.98 7.250 8.50 8.70 0.25 0.12 2.62 1/2 - 13 4
213TC 1.00 10.15 7.35 — 6.69 5.98 7.250 8.50 9.00 0.25 0.25 3.12 1/2 - 13 4
215TC 1.00 10.15 7.35 — 6.69 5.98 7.250 8.50 9.00 0.25 0.25 3.12 1/2 - 13 4
254TC 1.25 12.01 9.51 3.15 6.30 7.32 7.250 8.50 9.68 0.25 0.25 3.75 1/2 - 13 4
256TC 1.25 12.01 9.51 3.15 6.30 7.32 7.250 8.50 9.68 0.25 0.25 3.75 1/2 - 13 4
284TC 1.50 12.60 10.10 3.94 6.30 7.32 9.000 10.50 10.90 0.25 0.25 4.38 1/2 - 13 4
286TC 1.50 12.60 10.10 3.94 6.30 7.32 9.000 10.50 10.90 0.25 0.25 4.38 1/2 - 13 4
324TC 2.00 15.27 11.02 3.94 7.87 11.26 11.000 12.50 13.27 0.25 0.25 5.00 5/8 - 11 4
326TC 2.00 15.27 11.02 3.94 7.87 11.26 11.000 12.50 13.27 0.25 0.25 5.00 5/8 - 11 4
364TC 3.00 18.89 14.37 2.24 12.28 10.86 11.000 12.50 13.38 0.25 0.25 5.62 5/8 - 11 8
365TC 3.00 18.89 14.37 2.24 12.28 10.86 11.000 12.50 13.38 0.25 0.25 5.62 5/8 - 11 8
365TSC 3.00 18.89 14.37 2.24 12.28 10.86 11.000 12.50 13.78 0.25 0.25 3.50 5/8 - 11 8
405TC 3.00 22.83 17.32 2.16 15.35 13.97 11.000 12.50 13.78 0.25 0.25 7.00 5/8 - 11 8
405TSC 3.00 22.83 17.32 2.16 15.35 13.97 11.000 12.50 13.78 0.25 0.25 4.00 5/8 - 11 8
MO
TOR
DIM
ENSIO
NS
www.worldwideelectric.net ▐ HYUNDAI Parts and Maintenance24
HYUNDAI PARTS AND MAINTENANCE MANUAL
WARRANTY LENGTH: The warranty length for HYUNDAI electric motors is as follows:
HYUNDAI PREMIUM EFFICIENCY MOTORS Three (3) years from date of sale (invoice) HYUNDAI IEEE-841 MOTORS Five (5) years from date of sale (invoice)HYUNDAI EXPLOSION PROOF MOTORS Three (3) years from date of sale (invoice)
PROCEDURE: ALL HYUNDAI ELECTRIC MOTORS WITH THE EXCEPTION OF EXPLOSION PROOF MOTORS:
1. Motors up to and including 40 HP are covered by our no-fault policy. If the motor has failed within the warranty period, the nameplate must be mailed to WorldWide Electric for credit. WorldWide shall not be liable for any labor or operating costs connected with the replacement of the motor. The purchaser shall be responsible for any transportation charges connected with the replacement of the motor.
2. Motors 50 HP and above must be inspected by an authorized EASA service center or other approved motor shop for determination of cause of failure. Authorized EASA service centers are available inside and outside of the United States. Visit the EASA website at www.easa.com to find the nearest authorized service center. These shops may also be able to assist with non-warranty service.
3. The service center must provide a written estimate for inspection and a purchase order must be issued by WorldWide Electric prior to the motor inspection.
4. If the failure is determined to be from a defect in material or workmanship when operated under normal conditions and in accordance with nameplate characteristic limits, WorldWide Electric shall either repair or replace the motor. WorldWide Electric shall not be liable for any labor or operating costs connected with the repair / replacement of the motor.
5. Should WorldWide choose to repair the motor, the service center must provide a written estimate for repair and a purchase order must be issued by WorldWide Electric prior to the repair being performed.
6. Should WorldWide Electric choose to replace the motor, the purchaser shall be responsible for any transportation charges connected with the replacement of the motor.
EXPLOSION PROOF MOTORS:
1. Motors must be inspected by a UL certified / authorized EASA service center for determination of cause of failure. Authorized EASA service centers are available inside and outside of the United States. Visit the EASA website at www.easa.com to find the nearest authorized service center. These shops may also be able to assist with non-warranty service.
2. The service center must provide a written estimate for inspection and a purchase order must be issued by WorldWide Electric prior to the motor inspection.
3. If the failure is determined to be from a defect in material or workmanship when operated under normal conditions and in accordance with nameplate characteristic limits, WorldWide Electric shall either repair or replace the motor. WorldWide Electric shall not be liable for any labor or operating costs connected with the repair / replacement of the motor.
4. Should WorldWide choose to repair the motor, the service center must provide a written estimate for repair and a purchase order must be issued by WorldWide Electric prior to the repair being performed.
5. Should WorldWide Electric choose to replace the motor, the purchaser shall be responsible for any transportation charges connected with the replacement of the motor.
This warranty does not apply if the failure is caused or contributed to by the following: improper handling of the motor, improper storage, improper installation, abuse, unsuitable or wrong application of the product, lack of reasonable and necessary maintenance, improper packaging for return, or repairs made or attempted by any other company, which in the judgement of WorldWide Electric adversely affects the product’s performance or reliability. In no event shall WorldWide Electric be liable for loss of profits, indirect or consequential. No products shall be returned to WorldWide Electric without its prior consent and a written return authorization number. All item(s) must be properly packaged with RGA number affixed to the package and shipped prepaid unless otherwise stated in the RGA.
Warranty Policy
WA
RRA
NTY
POLI
CY
HYUNDAI Parts and Maintenance ▐ www.worldwideelectric.net 25
HYUNDAI PARTS AND MAINTENANCE MANUAL
Installation and Maintenance
This manual includes procedures for the safe and proper transportation, installation, connection, operation and maintenance of HYUNDAI electric motors. Read these instructions carefully before attempting to install, operate or service the motors and retain for future reference.
Safety precautions must be observed to protect personnel from possible injury which can be caused by improper handling of the motor, including high voltages, hot surfaces and rotating parts.
RECEIVING:
Check the motor nameplate data (HP, # of poles / RPM, voltage, frame size, enclosure, etc.) and confirm that it corresponds to your requirements.
Check for any damage that could have been caused by transportation. Make sure that there are no loose parts on the motor, inside the fan cover on TEFC motors, or visible through the cooling openings on ODP motors.
If a shaft clamp or other shipping braces (painted yellow) are installed on the motor for transport, remove these and retain for future use.
Turn the shaft by hand to ensure that it rotates freely and smoothly. Listen for any sounds of mechanical resistance or impact. If any are present, please check with your local representative.
CAUTION: If the motor is supplied with eyebolts for lifting purposes, make certain that these are tightened securely. Use these for lifting the motor only. Do not use these for lifting any equipment mounted to the motor. Note that the direction of lift should not exceed 15 degrees from the shank of the eyebolt.
WARNINGS:
! High Voltage, hot surfaces and rotating parts of electrical machinery can cause serious or fatal injury to persons and property. Only properly trained, qualified personnel should perform installation, operation and maintenance on the equipment and this should be done in accordance with NEMA MG-2, National Electrical Code, CSA C22-100 (C.E.C), IEC 364 (prEN50110-01), and all local and utility regulations and safety standards.
! When preparing to service the motor, all power sources to the motor and accessory devices must be de-energized and disconnected. All rotating parts of the equipment must be at a standstill. Follow all regulations in locking out the power source to prevent accidental reconnection.
! Before the motor is re-energized, make sure that all safety guards are in place and that the shaft key is fully captive or removed.
! When working near machinery, high noise levels and proper ear protection must be used. Refer to local and national safety regulations.
! Automatic reset thermal protection should not be used where an unexpected automatic restart would be hazardous to personnel.
! The motor should be grounded properly to protect against fatal injury to personnel. Refer to NEC, CSA, and local utility regulations for correct method of doing this. Note that grounding cables must be securely fastened to be effective and that lugs must be crimped to the cable using a proper crimping tool.
INSTA
LLATION
AN
DM
AIN
TENA
NCE
www.worldwideelectric.net ▐ HYUNDAI Parts and Maintenance26
HYUNDAI PARTS AND MAINTENANCE MANUAL
WARNINGS: (Continued)
! The repair of explosion proof motors should only be made by an authorized service center that is certified by Underwriters Laboratories (UL), Canadian Standards Association (CSA) or any other appropriate agency. Failure to comply with this will violate the hazardous duty certifications of the motor. The use of a non explosion proof motor in hazardous areas is strictly prohibited. Contact WorldWide Electric or your local authorized representative for assistance.
STORAGE:
1. When motor is not in operation, the following precautionary measures must be undertaken to ensure that motor life is not reduced:
The location should be dry, without direct sunlight, well ventilated, and free of dust or corrosive gas. The motor should not be stored near a heat or cold source (i.e. boiler / freezer). The storage area should be free of vibration. The motor should be easily accessible.
2. Specific precautions should be taken to prevent the entrance of moisture, dust or dirt.
3. Before commissioning, the motor’s insulation should be tested with a 500VDC megger. If the resistance value of the insulation is less than 1MΩ, the windings must be dried prior to energizing.
LOCATION:
Open drip proof motors (IEC protection ≤ IP23) are intended for use in a well ventilated area where the atmosphere is reasonably free of dirt, moisture, corrosive agents, and is not intended for use outdoors.
Totally enclosed motors (IEC protection ≥ IP44) are intended for use where they are exposed to dirt, moisture, dust and most outdoor conditions. Standard enclosed motors require special features in environments where there is extremely fine abrasive dust or corrosive chemicals present, or in outdoor applications where weather protection should be considered.
Explosion proof motors are intended for use in hazardous areas classified by UL, National Electrical Code (NEC), CSA, and IEC79 (EN 50 014 and EN 50 018).
Mill and chemical, heavy duty totally enclosed motors are intended for use in areas the same as standard enclosed motors, but where there are also corrosive agents or high moisture content in the environment.
Standard motors are suitable for use in ambient temperatures between -20°C (-40°C with low temperature grease) to +40°C, and at elevations at or below 1,000 meters (3,300 feet) above sea level.
MOUNTING:
1. Make certain that the underside of the motor feet and/or the flange are clean and free of dirt. If necessary, wipe with clean cloth using a non abrasive cleaning solution. Remove any masking materials or any rust inhibitive coating from the mounting surfaces and the shaft.
2. Motors must be mounted securely on a firm and flat base or onto a rigid flange capable of supporting the entire motor weight. The mounting bolts must be tightened evenly to a minimum of the torque specified in (TABLE 1) to prevent a change in alignment and the resulting damage to equipment. These values are for medium carbon steel bolts (identified by 3 radial lines at 120° on the bolt head-ANSI Grade 5). For low carbon steel bolts (ANSI Grade 2) use 50% of this torque.
Installation and Maintenance
INST
ALL
ATIO
N A
ND
MA
INTE
NA
NCE
HYUNDAI Parts and Maintenance ▐ www.worldwideelectric.net 27
HYUNDAI PARTS AND MAINTENANCE MANUAL
Installation and Maintenance
MOUNTING: (Continued)
MOUNTING TABLE 1:
Bolt Size Recommended Torque
Inch Metric Ft. Ib. N-M
1/4 M6 7-11 9-15
5/16 M8 14-21 19-28
3/8 M10 25-37 34-50
1/2 M12 60-90 81-122
5/8 M16 120-180 163-244
3/4 M20 210-320 285-433
3. All ball bearing motors (frame up to and including NEMA 326T(IEC 200L)) can be mounted in all positions shown in NEMA MG1-4.03 provided that the mounting surface is stable, solid and the drain holes are located properly. For recommendations for other applications please contact WorldWide Electric.
4. When using a direct coupling, align motor shaft to driven shaft as accurately as possible. Although a flexible coupling is designed to transmit power with some angular and parallel misalignment, this will affect the life of the motor bearings.
5. If bolted-on bases are removed from totally enclosed motors, the integrity of the enclosure must be maintained by resealing the bolt holes using shorter bolts. Do not reuse the original bolts as these will be too long and will interfere in the proper operation of the motor.
6. Remove drain plugs from the endshield or frame on totally enclosed motors. It is critical that the motor be mounted with these at the lowest point of the frame. If the motor is to be mounted with the feet in any position except down, these must be relocated to the appropriate position. Contact a WorldWide Electric representative for assistance.
7. The use of pulleys, sheaves, sprockets or gears on motor shafts is defined in NEMA MG1-14.07. The application of V-belt sheave dimensions on AC motors is shown in NEMA MG1-14.41. The pitch diameter must not be less than indicated in (TABLE 2) and the maximum sheave width must not exceed:
(N-W) for Narrow Type (3V, 5V, 8V) sheaves 2x (N –W)- ¼” for Conventional Type (A, B, C, D, E) sheaves (N-W) is the usable shaft length (IEC designation is dim. E)
8. For sheave ratios greater than 5:1 and center distances less than the diameter of the large sheave, please contact WorldWide Electric Corporation.
9. Mount the pulley or half coupling to the motor shaft using a non-impact method. Do not hammer on the motor shaft as this will cause brinelling of the bearings, leading to premature failure of the motor.
10. The motor is balanced using a half key. Therefore, the motor pulley or half coupling should be balanced with a half key.
11. After mounting the coupling or the belt and pulleys, a guard must be placed over all of the moving parts to protect against accidental contact and injury.
12. Do not over tension the belts as this will lead to excessive overhung load on the motor bearing, causing a significant reduction in bearing life and premature failure of the motor.
13. Make certain that there is an adequate space around the motor for ventilation. If using a belt pulley, the ventilation opening at the rim of the pulley is essential for the motor’s cooling. All ventilation openings must not be obstructed and any wall or divider should be mounted a minimum of 1inch (25mm) away from the motor.
INSTA
LLATION
AN
DM
AIN
TENA
NCE
www.worldwideelectric.net ▐ HYUNDAI Parts and Maintenance28
HYUNDAI PARTS AND MAINTENANCE MANUAL
MOUNTING: (Continued)
MOUNTING TABLE 2:
Horsepower at Synchronous Speed, RPM
V-Belt Sheave
Conventional Narrow
A, B, C, D, E 3V, 5V, 8V
3600 1800 1200 900 Minimum Pitch Diameter (inch) Minimum Outside Diameter (inch)
1.5 1 0.75 0.5 2.2 2.2
2-3 1.5-2 1 0.75 2.4 2.4
3 3 1.5 1 2.4 2.4
--- --- 2 1.5 2.4 2.4
5 --- --- --- 2.6 2.4
7.5-10 5-7.5 3-5 2-3 3.0 3.0
15 10 7.5 5 3.8 3.8
20-25 15 10 7.5 4.4 4.4
--- 20 15 10 4.6 4.4
--- 25 --- --- 5.0 4.4
--- 30 20 15 5.4 5.2
--- 40 25 20 6.0 6.0
--- 50 30-40 25-30 6.8 6.8
--- 60 --- --- 7.4 7.4
--- --- 50 40 8.2 8.2
--- 75 --- --- 9.0 8.6
--- --- 60 --- 9.0 8.0
--- --- --- 50 9.0 8.4
--- 100 --- --- 10.0 8.6
--- --- 75 60 10.0 10.0
--- 125 --- --- 11.5 10.5
--- --- 100 --- 11.0 10.0
--- --- --- 75 10.5 9.5
--- 150 --- --- --- 10.5
--- --- 125 100 12.5 12.0
--- 200 --- --- --- 13.2
CAUTION: In all cases, no surrounding structure should obstruct normal flow ofventilation air through or over the motor.
Installation and Maintenance
INST
ALL
ATIO
N A
ND
MA
INTE
NA
NCE
HYUNDAI Parts and Maintenance ▐ www.worldwideelectric.net 29
HYUNDAI PARTS AND MAINTENANCE MANUAL
Installation and Maintenance
POWER SUPPLY AND CONNECTIONS:
1. The wiring of the motor and control, as well as the grounding and overload protection, must be performed in accordance with National Electrical Code, CSA C22-100(C.E.C) and all local and utility regulations and safety standards. Installation should be done only by properly trained and qualified personnel.
2. The power supply must agree with the nameplate voltage and frequency. The permissible variation on the power supply is:
For NEMA rate motors: Rated voltage: ± 10% Rated frequency: ± 5% Combined: ± 10% (with frequency component not to exceed ±5%) For IEC rated motors (per IEC 34-1, EN60034-1): Rated voltage: ± 5% Rated frequency: ± 2%
3. Thermally protected motors will have 2 wires in the main terminal box identified as “P1” and “P2”. These should be connected to the motor starter or control circuit according to the connection diagram found inside the terminal box. Motors equipped with a manual reset button or automatic reset overloads do not require any external hook up to the control circuitry. Manual protected motors can be reset after the motor has cooled down by pushing the “RESET” button. Automatic type overloads do not have an external button and will reset by themselves when the motor has cooled down sufficiently. 4. Dual voltage motors can be hooked up for the desired voltage as shown in the connection diagram inside the conduit box.
5. The main terminal box supplied with the motor has been sized to provide adequate space for the connections between the motor leads and the incoming power cables. These connections must be made and insulated in a workmanlike manner following the best trade practices and in strict adherence to local regulations.
6. Before closing the terminal box, make certain that the opening around the incoming power cables and any other opening is completely sealed and a proper cable gland is in place. When installing the terminal box cover to the base, install the gasket provided and ensure that the components fit together properly. Any modifications done to the terminal box must allow it to maintain the same enclosure as that of the motor and the original box.
7. For the motors equipped with a mechanical brake, check that the brake operates properly prior to commissioning the motor.
8. Standard connections for three-phase motors are shown in Diagrams (A-E). Use appropriately sized cable connectors when making the connections, and ensure that these are tight and insulated properly before applying power. To change the direction of rotation, interchange any of two of the incoming power leads
CAUTION: All explosion proof motors are equipped with thermostats. These must be connected to the motor control in order to maintain the factory warranty and for the installation to comply with CSA, UL, NFPA, WCB and other governing regulations.
CAUTION: Do not use automatic reset protected motor where unexpected start could cause injury to operating personnel.
INSTA
LLATION
AN
DM
AIN
TENA
NCE
www.worldwideelectric.net ▐ HYUNDAI Parts and Maintenance30
HYUNDAI PARTS AND MAINTENANCE MANUAL
CAUTION: If rotation must be changed, ALLOW THE MOTOR TO STOP COMPLETELY.
CONNECTION DIAGRAMS:
Installation and Maintenance
INST
ALL
ATIO
N A
ND
MA
INTE
NA
NCE
HYUNDAI Parts and Maintenance ▐ www.worldwideelectric.net 31
HYUNDAI PARTS AND MAINTENANCE MANUAL
Installation and Maintenance
TESTING:If the motors have been in storage for an extensive period of time or have been subjected to adverse moisture conditions, it is best to check the insulation resistance of the stator winding with a megohmmeter. Depending on the length and condition of storage, it may be necessary to regrease or change rusted bearings. If resistance is lower than 1 megohm, the windings should be dried in one of the following ways:
1. Bake in oven at temperature below 194°F until insulation resistance remains constant for a minimum of 30 minutes
2. Enclose the motor with a canvas or similar covering, leaving an opening at the top for moisture to escape. Insert a heater or lamps into this enclosure, taking care not to place these devices in a way that creates hot spots in the motor windings. Leave the heating devices in the enclosure until the insulation resistance remains constant for a minimum of 30 minutes.
3. With the rotor locked, apply low voltage (approximately 10% of nameplate voltage) and gradually increase current through windings until temperature measured with thermometer reaches 85°C (184°F). Do not exceed this temperature. Maintain this temperature until the insulation resistance remains constant for a minimum of 30 minutes. Turn the shaft manually to check for any deterioration in the bearings on the motor. Depending on the length and conditions of the storage it may be necessary to regrease or change rusted bearings.
START-UP:
1. Start the motor with the load disconnected (make sure key is removed from motor shaft). Check direction of rotation. Interchange any two leads of a three-phase motor to change the direction of rotation.
2. Connect the load and operate for an initial period of at least one hour. Check for any unusual noise, vibration or hot spots. These items should also be checked periodically as a part of a maintenance schedule even after a successful start-up. Acceptable vibration levels at no load condition are defined in:
NEMA MG1-7: 2-6 pole: 0.15in/s peak 8 pole: 0.12in/s peak IEC 60034-14 56≤H≤132: 1.6mm/s r.m.s. (free suspension) 1.3mm/s r.m.s. (rigid mounting) 132<H≤280: 2.2mm/s r.m.s. (free suspension) 1.8mm/s r.m.s. (rigid mounting) H>280: 2.8mm/s r.m.s. (free suspension) 2.3mm/s r.m.s. (rigid mounting)
3. Check the operating current against the nameplate current. Be careful not to exceed the value of the nameplate amperes under continuous load. Motors with a service factor greater than 1.0 can be operated continuously with the current not exceeding the nameplate value multiplied by the service factor.
4. When operating 208-230/460 voltage motors at 200 volts, the slip of the motor will increase by approximately 30%, and the torques will be reduced (20% to 30%). Before starting the unit, make certain the motor will start and accelerate the load without injurious heating and adequate torque. Contact WorldWide Electric for assistance.
INSTA
LLATION
AN
DM
AIN
TENA
NCE
www.worldwideelectric.net ▐ HYUNDAI Parts and Maintenance32
HYUNDAI PARTS AND MAINTENANCE MANUAL
INSPECTION:When the motor is in operation examine, the motor at regular intervals. Keep motor clean and ventilation openings clear. If the motor is to be in storage for one month or longer:
The shaft must be turned by hand to check for smooth rotation of the bearings each month. The insulation resistance should be tested with a megger at least once every three months (refer to “Testing” for a minimum value and corrective action).
LUBRICATION:
1. Standard motors contain prelubricated, double shielded/sealed ball bearings which are adequately greased for life at the factory and do not require relubrication.
2. Motors with open type or single shielded/sealed ball bearings have provisions for grease nipples and discharge plugs on the motor to allow grease to be inserted into the bearing cavity in more severe condition applications. Motors are shipped with grease for initial running and do not need additional lubrication except in certain instances (i.e storage in excess of 3 months or in the presence of construction dust). In order to provide the maximum bearing life, refer to (LUBRICATION TABLE) for guidelines. Note that excessive or too frequent lubrication may damage the motor.
LUBRICATION TABLE:
Conditions Standard Severe Very Severe
Hours / Day 8 Hrs, 1 or 2 Shifts 24 Hrs, Continuous ---
Loading Normal or High Light Shock / Vibration Heavy Shock / Vibration
Ambient ≤40°C, Clean Dirt, Dust Dirt, Dust, >40°C
0.5-7.5 HP 7 years 3 years 9 months
10-30 HP 3 years 1 year 4 months
40-75 HP 10 months 6 months 3 months
100-150 HP 6 months 4 months 2 months
200-350 HP 3 months 1 month 0.5 months 3. Make certain that the fittings are clean and free from dirt. Using a low pressure grease gun, pump in the recommended amount of grease until new grease appears at grease discharge point.
4. Use MOBIL POLYREX-EM grease or equivalent polyurea based grease with the same thermal properties, unless a special grease is specified on the nameplate. Failure to maintain grease compatibility will shorten bearing life significantly.
5. Regreasing of the bearings should be performed with the motor running. This will ensure an even dispersion of the grease in the bearing and cavity. After regreasing, continue to run the motor for ten to thirty minutes. 6. After re-greasing, continue to run the motor for ten to thirty minutes.
SERVICE:HYUNDAI motors should only be serviced by properly trained and qualified personnel using the proper tools, equipment and genuine HYUNDAI replacement parts. For further information please contact WorldWide Electric. When ordering spares or replacement parts please specify complete nameplate information such as model number, serial number, HP (or KW) frame size, number of poles, enclosure, etc.
WARNING: Make sure all guards are in place and stay clear of all moving parts.
Installation and Maintenance
INST
ALL
ATIO
N A
ND
MA
INTE
NA
NCE
HYUNDAI PARTS AND MAINTENANCE MANUAL Table Of Contents
WorldWide Electric CorporationP.O. Box 307, Pittsford, NY 14534 USAPhone: 800-808-2131 ♦ Fax: 800-711-1616www.worldwideelectric.net
WORLDWIDE ELECTRIC CORPORATION Warehouse Locations and Sales Offices
Sales Offices
Atlanta, GA Boston, MA Chicago, IL Denver, CO Detroit, MI Los Angeles, CA Miami, FL Mobile, AL Rochester, NY * St. Louis, MO
* Headquarters
Warehouse Locations
Allentown, PA Atlanta, GA Dallas, TX Indianapolis, IN Kansas City, KS Little Rock, AR Los Angeles, CA Miami, FL Rochester, NY
Available For Pick-Up Or Delivery 24 Hours A Day - 7 Days A Week
*
110112-HPMM
Source Code:
WorldWide Electric CorporationP.O. Box 307Pittsford, NY 14534
PRSRT STDU.S. POSTAGE
PAIDRochester, NYPermit No. 695
WorldWide Electric CorporationP.O. Box 307, Pittsford, NY 14534 USAPhone: 800-808-2131 ♦ Fax: 800-711-1616www.worldwideelectric.net