ESCALATORS & MOVING WALKS Moving solutions with safety, reliability and efficiency ESCALATORS & MOVING WALKS - We reserve the right to change designs and specifications for the product development without prior notice. Copyright ⓒ HYUNDAI ELEVATOR CO., LTD. All rights reserved. Printed in Korea. C-EMW-E1513/2014.04/Rev.15 AFRICA ALGERIA Tel : 213-21-203-786 Fax : 213-21-216-444 EGYPT Tel : 20-2-25078503 Fax : 20-2-25078503 ETHIOPIA Tel : 251-911-851313 Fax : 251-118-605051 KENYA Tel : 254-722-667984 LIBYA Tel : 218-91-735-0745 Fax : 201-00-354-4237 NIGERIA Tel : 234-803-7352222 Fax : 0703-4444400 SOUTH AFRICA Tel : 277-14554770 SUDAN Tel : 249-183-230-389 Fax : 249-183-230364 TUNIS Tel : 216-70-853-231 Fax : 216-71-754-361 MIDDLE EAST BAHRAIN Tel : 973-17-702-468 Fax : 973-17-702-643 IRAN Tel : 98-21-8869-8727~36 Fax : 98-21-8855-3741 IRAQ Tel : 964-790-1336498 Fax : 964-770-2507319 ISRAEL Tel : 972-3-9630000 Fax : 972-3-9630050 JORDAN Tel : 962-79-5526-713 Fax : 962-6-5699-014 KUWAIT Tel : 965-2245-7925 Fax : 965-2422-3510 LEBANON Tel : 961-1-750-229 Fax : 961-1-352-969 OMAN Tel : 968-9286-4334 Fax : 968-2449-9307 PAKISTAN Tel : 92-21-3432-0601 Fax : 92-21-3432-0617 QATAR Tel : 974-4436-6687 Fax : 974-4436-6689 SAUDI ARABIA Tel : 96-62-652-9000 Fax : 96-62-652-9090 SYRIA Tel : 963-114-419199 Fax : 963-114-469-8666 UAE Tel : 971-4-294-4475 Fax : 971-4-294-4476 YEMEN Tel : 967-1-450556 Fax : 967-1-450557 EUROPE & CIS ARMENIA Tel : 971-4-4404927 Fax : 971-4-4404926 AZERBAIJAN Tel : 994-12-555-1746 Fax : 994-12-567-18-77 KAZAKHSTAN (KURMET TRADING LLP) Tel : 7-727-244-05-55 (TECHNO LIFT) Tel : 7-727-267-64-56 POLAND Tel : 48-61-820-85-51 Fax : 48-61-820-85-52 RUSSIA (SIVER LIFT LTD.) Tel : 7-495-514-00-32 Fax : 7-495-258-04-18 (S-LIFT CO., LTD.) Tel : 7-423-222-98-73 SPAIN Tel : 34-933-779-451 Fax : 34-933-779-401 TURKEY Tel : 90-216-488-8000 Fax : 90-216-488-9191 TURKMENISTAN Tel : 993-12-95-0333 Fax : 993-12-95-0330 ASIA BANGLADESH Tel : 880-1711-533047 Fax : 880-2- 9884392 CAMBODIA Tel : 855-23-666-1878 CHINA [Head Office(Factory)] Tel : 86-21-5981-3981 Fax : 86-21-5981-3982 (Shanghai Office) Tel : 86-21-6485-8600 Fax : 86-21-6485-3511 INDIA Tel : 91-20-3250-2190 Fax : 91-20-2747-0568 INDONESIA Tel : 62-21-631-8444 Fax : 62-21-632-6288 JAPAN Tel : 81-3-3436-5117 Fax : 81-3-3436-5198 MALAYSIA Tel : 60-3-6201-9995 Fax : 60-3-6201-9992 MONGOLIA Tel : 976-11-7015-3333 Fax : 976-11-7016-3333 MYANMAR Tel : 95-1-521080~83 Fax : 95-1-521080~83 PHILIPPINES Tel : 632-716-0905 Fax : 632-714-8896 THAILAND Tel : 66-2348-8000 Fax : 66-2249-8483 VIETNAM (HANOEL) Tel : 84-4-3572-4588 Fax : 84-4-3572-4699 (TID ELEVATOR COMPANY) Tel : 84-4-3943-4945 Fax : 84-4-3232-1496 NORTH/ SOUTH AMERICA ARGENTINA Tel : 5411-3220-2878 BRAZIL (Sao Leopoldo) Tel : 55-51-3081-9996 (Sao Paulo) Tel : 55-11-5102-3380 BOLIVIA Tel : 591-3-3-435243 CHILE Tel : 562-263-53394 COLOMBIA Tel : 57-4-444-9297 CUBA Tel : 537-699-3460 Fax : 537-699-3412 DOMINICAN REPUBLIC Tel : 809-566-9426 ECUADOR Tel : 593-2-254-2831 Fax : 593-2-255-3761 GUATEMALA Tel : 502-2388-0000 Fax : 502-2388-0044 MEXICO Tel : 525-556635246 Fax : 525-556632982 PANAMA Tel : 507-230-3166 Fax : 507-230-3187 PERU Tel : 51-1-472-6868 Fax : 51-1-472-6898 USA Tel : 562-404-1909 Fax : 562-404-1902 VENEZUELA Tel : 58-212-232-8263 Fax : 58-212-232-7178 HEAD OFFICE & FACTORY Gyeongchung-daero 2091, Bubal-eup, Icheon-si, Gyeonggi-do, 467-734, Korea Tel : 82-2-3670-0877/0661 Fax : 82-2-3672-8763~4 www.hyundaielevator.co.kr SEOUL OFFICE(INT’L SALES DIV.) 9F, East Bldg., Hyundai Group Bldg. 194 Yulgok-ro, Jongno-gu, Seoul, 110-754, Korea Tel : 82-2-3670-0877/0661 Fax : 82-2-3672-8763~4 INTERNATIONAL SALES & SERVICE NETWORK
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
ESCALATORS & MOVING W
ALKSM
oving solutions with safety, reliability and efficiency
ESCALATORS & MOVING WALKS - We reserve the right to change designs and specifications for the product development without prior notice. Copyright ⓒ HYUNDAI ELEVATOR CO., LTD. All rights reserved. Printed in Korea.C-EMW-E1513/2014.04/Rev.15
StepStep Aluminum Die Casting, Hairline-Finished Stainless Steel
Demarcation Yellow molded safety inserts on 3 sides
Comb Yellow Synthetic Resin (Optional : Aluminum)
Floor Plate Stainless steel plate with anti-slip grooves
Exterior Cladding By Others
Balustrade Designs
Balustrade Designs
Design Type
Type BT BB
Designs
Model
New World Class O O
H-Series O O
New Moving Walk O
12 HYUNDAI ELEVATOR Escalators & Moving Walks 13
Safety Device
Safety Device Safety Device
Safety is a essential value of Hyundai Elevator.
Emergency Stop ButtonLocated on both the upper and lower landings and mounted on newel skirt or newel deck. Pressing the red button will safely stop the escalator if it’s needed.
Skirt SwitchStop the escalator/moving walkautomatically, if a foreign object such as part of a shoe gets caught between a step/pallet and skirt.
Stopped Handrail Switch Stop the escalator/moving walk automatically, if the handrail stops, slides, or breaks.
Handrail Guard SwitchStop the escalator/moving walk automatically, if a object becomes wedged between the handrail and the handrail guard.
Safety BrushSafety brushes promote passenger safety by gently guiding passengers away from skirt.
Broken Step/Pallet SwitchStop the escalator/moving walk, if the step/pallet is broken or running incorrectly.
Broken Drive Chain SwitchStop the escalator/moving walk automatically, if the drive chain breaks.
Broken Step/Pallet Chain SwitchStop the escalator/moving walk automatically,
if the step chain stretches or breaks.
Comb Plate Switch
Stop the escalator/moving walk, if a foreign object becomes
wedged between the comb and steps/pallets.
Yellow Demarcation LineLocated on each step, these lines provide additional visual safety by
guiding passengers away from edges.
14 HYUNDAI ELEVATOR
Wiring Inlet(By Others)
NEW WORLD CLASS ESCALATORS(30°)NW-BT, NW-BB
Notes : 1. AA = 1.732×H + B + C + 100 When maximum floor opening exceeds AA=14,836mm, intermediate
support(s) are required. Consult Hyundai for the intermediate support data. 2. In case inverter system is applied, dimension B,F shall increase 500mm. (except 800type) 3. When vertical rise is over 6000mm, 3-flat step is applied. 4. Dimension between the end of handrail to the wall ; Min. 2500mm. 5. Dimensions are based on EN115. 6. Vertical Rise H 10.5m. 7. In case vertical rise 9 < H 10.5 is applied, dimension B,F shall increase 500mm. 8. In case 800type is applied, dimension B,F shall increase 500mm.
w3
w2
w1
w4
w5
935
Floor Opening Enclosure(By Others)
Typical Concrete Support
L200×200×20
50 50
11 (S
him
)
90
Top of Finish Floor(By Others)
Min. 200
150
Model(Inclination)
Q’ty ofFlat Step
B C D E F G J
NW-BTNW-BB
2 2560 2230 1820 1490 2511 2118 4500
3 2967 2637 2227 1897 2918 2525 4910
(note 1) Floor Opening AA
Head
ROO
M
Min
. 230
0
908
Min
. 117
0
1070
1070
1.732H
WorkingPoint
(note 2) F
793
950
G
E
C
J
L2
937
R2
R1
R4
R3
50
30°
Floor Opening Enclosures (By Others)
H =
Rise
WorkingPoint
D
50
(note 4) Min. 2500
(note 4) Min. 2500
L1L3
(note 2) B
Reactions (Unit : kg)
Type NW800Rise H (mm) H 6000 5000 H 7600 7600 H 10500
Notes : 1. AA = 1.428×H + 2650 + 2230 + 100 When maximum floor opening exceeds AA=13,500mm, intermediate support(s) are
required. Consult Hyundai for the intermediate support data. 2. In case inverter system is applied, dimension 2650, 2522 shall increase 500mm. (except 800type) 3. Dimension between the end of handrail to the wall ; Min. 2500mm. 4. Dimensions are based on EN115. 5. Vertical Rise H 6m. 6. In case 800type is applied, dimension 2650, 2522 shall increase 500mm.
(note 4) Min. 2500
(note 3) Min. 2500
NEW WORLD CLASS ESCALATORS(35°)NW-BT, NW-BB
HEAD
ROO
MM
in. 2
300
w3
w2
w1
w4
W5
935
Floor Opening Enclosure(By Others)
Typical Concrete Support
L200×200×20
50 50
90
Top of Finish Floor(By Others)
Min. 200
11(S
him
)
150
Typical Steel Support
L200×200×2050 50
90
Min. 200Top of Finish Floor
(By Others)
Reinforced Plate(By Others)
11(S
him
)
150
Type NW800 NW1000 NW1200
W1 612 813 1014
W2 855 1056 1257
W3 1150 1350 1550
W4 1100 1300 1500
W5 1250 1450 1650
Section Dimensions (Unit : mm)
Vertical RiseH(mm) Reactions ML800 ML1000 ML1200
3000~6000
R1 0.51H + 2400 0.59H + 2700 0.66H + 3000
R2 0.51H + 1800 0.59H + 2100 0.66H + 2300
Reactions (Unit : kg)
Note : When vertical rise is over 6000mm or AA is over 14230mm, consult Hyundai for reactions data.
Soffit Guard(By Others)
Standard Layout & Dimensions
Escalators & Moving Walks 15
16 HYUNDAI ELEVATOR Escalators & Moving Walks 17
H-SERIES ESCALATORSHA-BT, HA-BB
Standard Layout & Dimensions
Notes : 1. N : Number of intermediate supports Max. distance between intermediate supports is 12000mm. AA = 1.732×H + 4464 + 4342 + 100
2. Dimension between the end of handrail to the wall : Min. 2500mm. 3. 4464, 4342 are dimensions of inverter applied system. (800Type : 4664, 4542) 4. If EN115 is applied, consult Hyundai. 5. Vertical Rise 10.5m < H 15m.
2943 (note 3) 4464
2640
(note 3) 4342793
937
R1
50 50
2150
30 °
L1 (Max.12000)
R4
R3
Min
. 290
937
L3 (Max.12000)
L2 (Max.12000)
H =
Rise
Min
. 230
0
908
Soffit Guard(By Others)
Floor Opening Enclosures (By Others)
Wiring Inlet(By Others)
WorkingPoint 14
00
(note 2) Min. 2500
(note 1) Floor Opening AA
1200
Min
. 140
0
1.732H
1100
3065
R2 WorkingPoint
Min. 5700
(note 2) Min. 2500
(note 1)Intermediate
Support(By Others)
w 5
w 3
w1
w2
w 4
w 4 + 200
936
Floor Opening Enclosure(By Others)
Typical Concrete Support
L200×200×20
50 50
90
Top of Finish Floor(By Others)
Min. 200
Base Plate 150×19
11(S
him
)
Min.
210
Typical Steel Support
L200×200×20
50 50
90
Min. 200Top of Finish Floor
(By Others)
Reinforced Plate(By Others)
11(S
him
)
Min.
210
Note : Consult Hyundai if the isolation pad is applied.
Notes : 1. N : Number of intermediate supports Max. distance between intermediate supports is 12000mm. AA = 1.732×H + 4014 + 3140 + 100 2. Dimension between the end of handrail to the wall : Min. 2500mm. 3. 4014 is a dimension of inverter applied system. 4. Dimensions are based on EN115. 5. Vertical Rise 15m < H 20m.
Typical Concrete Support
L200×200×20
50 50
90
Top of Finish Floor(By Others)
Min. 200
Base Plate 150×19
11 (S
him
)
Min.
210
Typical Steel Support
L200×200×2050 50
90
Min. 200Top of Finish Floor
(By Others)
Reinforced Plate(By Others)
11 (S
him
)
Min.
210
Note : Consult Hyundai if the isolation pad is applied.
Notes : 1. In case inverter system is applied, dim. 3300 shall increase 500mm. (1000Type : increase 700mm) 2. Dimension between the end of handrail to the wall : Min. 2500mm. 3. Dimensions are based on EN115.
Notes : 1. In case inverter system is applied, dim. 2190, 4000 shall increase 500mm. (1000Type : increase 700mm) 2. Dimension between the end of handrail to the wall : Min. 2500mm. 3. Dimensions are based on EN115.
20 HYUNDAI ELEVATOR
WORKS TO BE DONE BY OTHER CONTRACTORS By Others
Floor Openings-Side view
The following list explains the work which is necessary for a normal escalator installation, but is not done by the escalator contractor.
Therefore this work must be provided by others.
1. Necessary properly framed openings in the floors, necessary
supports for the truss per the manufacturer's drawings and