-
Table of Contents
INTRODUCTION - - - - - - - - - - - - - - - - - - - -1-1
I. Welcome to HYPACK! - - - - - - - - - - - - - - - - - - - - -
- - - - 1-1
II. HYPACK Minimum System Requirements - - - - - - - - - - - - -
- - 1-2
III. Network System Requirements - - - - - - - - - - - - - - - -
- - - - - - 1-3
IV. Installation - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - 1-4
V. System Settings - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - 1-4A. User Account Controls in Windows - - - - - - -
- - - - - - - - - - - 1-4B. Windows Regional Options - - - - - - -
- - - - - - - - - - - - - - - 1-5C. Windows 7 Data Execution
Prevention Settings - - - - - - - - - - - - 1-6D. Firewalls - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-6
VI. Dongles - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - 1-7A. License Manager - - - - - - - - - - - - - - -
- - - - - - - - - - - - - 1-7B. Updating your License - - - - - - -
- - - - - - - - - - - - - - - - - - 1-9C. Network Dongles - - - - -
- - - - - - - - - - - - - - - - - - - - - - - 1-9
1 Configuring a Network Dongle - - - - - - - - - - - - - - - - -
- - - - - - - - - - -1-102 Accessing HYPACK on a Network Key - - -
- - - - - - - - - - - - - - - - - - -1-10
VII. User Permissions - - - - - - - - - - - - - - - - - - - - -
- - - - - - - 1-11
VIII.HYPACK Interface - - - - - - - - - - - - - - - - - - - - -
- - - - - 1-13A. HYPACK Project Items List- - - - - - - - - - - - -
- - - - - - - - - 1-15B. HYPACK Toolbars - - - - - - - - - - - - -
- - - - - - - - - - - - - 1-16
1 HYPACK Menu Bar - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - -1-162 HYPACK Icon Bar - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - -1-173 HYPACK Map View Tools - -
- - - - - - - - - - - - - - - - - - - - - - - - - -1-174
Configuring the HYPACK Toolbars and Menu Bar - - - - - - - - - - -
- - - - - -1-195 Using the Measuring Tool - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - -1-21
C. HYPACK Area Map - - - - - - - - - - - - - - - - - - - - - - -
- - 1-221 Area Map Views- - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - -1-232 Setting Chart Transparency - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -1-253 Setting Chart
Display Order - - - - - - - - - - - - - - - - - - - - - - - - - - -
- -1-264 Querying Area Map Features - - - - - - - - - - - - - - - -
- - - - - - - - - - - - -1-275 Saving Screen Captures of the Area
Map - - - - - - - - - - - - - - - - - - - - - - -1-29
D. Custom Window Layouts - - - - - - - - - - - - - - - - - - - -
- - - - 1-30E. Display Settings in the HYPACK Control Panel - - - -
- - - - - - - - 1-33
1 General Display Settings - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -1-332 Grid Display Settings - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -1-343 Soundings
Display Settings - - - - - - - - - - - - - - - - - - - - - - - - -
- - - -1-354 Seabed Identification Settings - - - - - - - - - - - -
- - - - - - - - - - - - - - - -1-395 Track Line Display Settings -
- - - - - - - - - - - - - - - - - - - - - - - - - - - -1-406
Planned Line Display Settings - - - - - - - - - - - - - - - - - - -
- - - - - - - - -1-41Last Updated February / 2014 i
-
Table of Contents7 Chart Display Settings - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - 1-418 Target Display
Settings- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- 1-47
F. Project Colors in HYPACK - - - - - - - - - - - - - - - - - -
- - - - 1-491 Setting your Palette Colors in the COLOR EDITOR - - -
- - - - - - - - - - - - - - 1-512 About Color Styles- - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - 1-523 Modifying
Color Zones in the COLOR EDITOR - - - - - - - - - - - - - - - - - -
1-534 Generating the Color Bands for a Palette in the COLOR EDITOR
- - - - - - - - - - 1-535 Modifying Color Bands in the COLOR EDITOR
- - - - - - - - - - - - - - - - - - 1-556 Saving Color Palettes - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-597
Loading a HYPACK Color File to a Palette - - - - - - - - - - - - -
- - - - - - - 1-59
G. Coordinating the Control Panel and COLOR EDITOR - - - - - - -
- - - 1-601 Coloring Soundings by Z-Value - - - - - - - - - - - - -
- - - - - - - - - - - - - 1-622 Coloring Soundings by File- - - - -
- - - - - - - - - - - - - - - - - - - - - - - - 1-643 Color Coding
Soundings by Seabed ID - - - - - - - - - - - - - - - - - - - - - -
- 1-654 Coloring Soundings by CHN Difference - - - - - - - - - - -
- - - - - - - - - - - 1-68
H. Display Schemes - - - - - - - - - - - - - - - - - - - - - - -
- - - - - 1-691 Creating Display Schemes in Scheme Builder - - - -
- - - - - - - - - - - - - - - - 1-702 Color Settings in Scheme
Builder - - - - - - - - - - - - - - - - - - - - - - - - - - 1-723
Matrix Sounding Colors in Scheme Builder - - - - - - - - - - - - -
- - - - - - - - 1-734 Text Settings in Scheme Builder - - - - - - -
- - - - - - - - - - - - - - - - - - - 1-745 Window Settings in
Scheme Builder - - - - - - - - - - - - - - - - - - - - - - - -
1-74
I. Language Selection - - - - - - - - - - - - - - - - - - - - -
- - - - - 1-75
IX. Projects in HYPACK - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - 1-76
A. The Project Manager - - - - - - - - - - - - - - - - - - - - -
- - - - - 1-77B. Managing Project Group Folders - - - - - - - - - -
- - - - - - - - - - 1-77
1 Adding and Removing Project Group Folders - - - - - - - - - -
- - - - - - - - - - 1-772 Renaming Project Group Folders - - - - -
- - - - - - - - - - - - - - - - - - - - - 1-783 Navigating Project
Groups - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1-78
C. Managing Projects - - - - - - - - - - - - - - - - - - - - - -
- - - - - 1-791 Opening an Existing Project - - - - - - - - - - - -
- - - - - - - - - - - - - - - - 1-802 Creating a New Project - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-833
Copying an Existing Project - - - - - - - - - - - - - - - - - - - -
- - - - - - - - 1-844 Transferring Projects Between Project Group
Folders - - - - - - - - - - - - - - - - 1-845 Renaming your Project
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-846
Hiding and Restoring your Project - - - - - - - - - - - - - - - - -
- - - - - - - - 1-857 Deleting your Project- - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - 1-858 Compressing your
Project - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1-86
D. Project Log - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - 1-87
X. Managing Files in your Project - - - - - - - - - - - - - - -
- - - - - 1-88A. About Loading Files to your Project- - - - - - - -
- - - - - - - - - - - 1-88B. Enabling and Disabling Files - - - - -
- - - - - - - - - - - - - - - - - 1-90C. Unloading Files from your
Project - - - - - - - - - - - - - - - - - - - 1-90D. Archiving
Files - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1-91E. Querying your Files - - - - - - - - - - - - - - - - - - - -
- - - - - - 1-92ii
-
Table of ContentsXI. HYPACK Data Files - - - - - - - - - - - - -
- - - - - - - - - - - - 1-94A. Raw Data Files - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - 1-95B. Edited Data Files - - -
- - - - - - - - - - - - - - - - - - - - - - - - - 1-95C. Sorted
Data Files - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1-96D. Catalog Files (*.LOG) - - - - - - - - - - - - - - - - - - -
- - - - - - 1-96
1 Creating a New Catalog File - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -1-962 Editing Catalog Files - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -1-973 Merging
Catalog files - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - -1-984 Show Lines Report for Catalog Files - - - - - - - -
- - - - - - - - - - - - - - - - -1-99
E. Golden Soundings - - - - - - - - - - - - - - - - - - - - - -
- - - - - 1-991 Generating Golden Soundings - - - - - - - - - - - -
- - - - - - - - - - - - - - - 1-1002 Displaying Golden Soundings -
- - - - - - - - - - - - - - - - - - - - - - - - - - 1-1013 Editing
Golden Sounding Features - - - - - - - - - - - - - - - - - - - - -
- - - - 1-101
XII. HYPACK Project Files - - - - - - - - - - - - - - - - - - -
- - - - -1-103
PREPARATION- - - - - - - - - - - - - - - - - - - - -2-1I.
Preparation Overview - - - - - - - - - - - - - - - - - - - - - - -
- - - 2-1
II. Background Charts - - - - - - - - - - - - - - - - - - - - -
- - - - - - 2-3A. Loading Background Charts to the Project - - - -
- - - - - - - - - - - - 2-4
1 Loading ARCS Charts to HYPACK - - - - - - - - - - - - - - - -
- - - - - - - - 2-52 Loading BSB Version 4 Charts to the Project -
- - - - - - - - - - - - - - - - - - - - 2-83 Loading VPF Charts to
the Project - - - - - - - - - - - - - - - - - - - - - - - - - -
2-94 Loading S63 Charts to the Project - - - - - - - - - - - - - -
- - - - - - - - - - - -2-10
B. Chart Display Options - - - - - - - - - - - - - - - - - - - -
- - - - - 2-121 Displaying CAD Charts - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - -2-122 Displaying Georeferenced PDF-
- - - - - - - - - - - - - - - - - - - - - - - - - - -2-133
Displaying S57 Charts - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - -2-134 Displaying SHP Charts - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - -2-16
C. Creating Georeferenced TIF Charts in HYPACK - - - - - - - - -
- - - 2-171 Exporting Georeferenced TIF Charts of your HYPACK
Display - - - - - - - - - - -2-172 Converting Image Files to
Georeferenced TIFs - - - - - - - - - - - - - - - - - - - -2-20
D. Geo-referenced PNG Charts from the Internet - - - - - - - - -
- - - - - 2-231 Adding a Web Server to the Web Maps Panel - - - - -
- - - - - - - - - - - - - - - -2-242 Removing a Web Server from the
Web Maps Panel - - - - - - - - - - - - - - - - - -2-253 Generating
Geo-referenced PNG Charts from Internet Images - - - - - - - - - -
- - -2-254 Modifying the Area for Geo-referenced PNG Charts in the
Web Maps Panel - - - - - -2-27
E. Creating Charts in the DG2 EDITOR - - - - - - - - - - - - - -
- - - - 2-271 Running the DG2 Editor - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - -2-282 Setting Display Attributes in
the DG2 EDITOR - - - - - - - - - - - - - - - - - - - -2-293 S57
Options in the DG2 EDITOR - - - - - - - - - - - - - - - - - - - - -
- - - - -2-304 Defining Feature Position in the DG2 EDITOR - - - -
- - - - - - - - - - - - - - - -2-31Last Updated February / 2014
iii
-
Table of Contents5 Importing Data to the DG2 EDITOR - - - - - -
- - - - - - - - - - - - - - - - - - 2-326 Modifying Features in the
DG2 EDITOR - - - - - - - - - - - - - - - - - - - - - - 2-357
Merging DG2 Charts - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - 2-358 Example of Creating a DG2 Chart - - - - - - -
- - - - - - - - - - - - - - - - - - 2-36
F. Creating Custom Chart Symbols in the S52 Editor - - - - - - -
- - - - - 2-411 The S52 EDITOR Interface- - - - - - - - - - - - - -
- - - - - - - - - - - - - - - 2-432 Running the S52 EDITOR - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - 2-44
G. GML Presentation Editor - - - - - - - - - - - - - - - - - - -
- - - - - 2-441 Running the GML PRESENTATION EDITOR - - - - - - - -
- - - - - - - - - - - 2-452 Assigning Display Commands in the GML
PRESENTATION EDITOR - - - - - - - 2-46
H. Exporting Map Features to Google Earth - - - - - - - - - - -
- - - - 2-47
III. Geodesy - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - 2-51A. Entering your Geodetic Parameters - - - - - - -
- - - - - - - - - - - - 2-51B. Selecting Ellipsoids and Projection
Parameters - - - - - - - - - - - - - 2-53
1 Using Predefined Grids- - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - 2-542 Manual Grid Selection - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - 2-543 Local Grids - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2-55
C. Entering Datum Transformations Parameters - - - - - - - - - -
- - - - 2-591 Specifying No Datum Transformation- - - - - - - - - -
- - - - - - - - - - - - - - 2-592 Specifying a 3-Parameter Datum
Transformation - - - - - - - - - - - - - - - - - - 2-603 Specifying
a 7-Parameter Datum Transformation - - - - - - - - - - - - - - - -
- - 2-60
D. Calculating Datum Transformation Parameters from Coordinate
Information - - 2-61
1 Creating Text Files for the Datum Transform Program - - - - -
- - - - - - - - - - - 2-632 Datum Transformation Report - - - - - -
- - - - - - - - - - - - - - - - - - - - - 2-64
E. Calculating Time Variable Datum Transformations- - - - - - -
- - - - - 2-65F. Exporting VDatum Data to an XYZ File- - - - - - -
- - - - - - - - - - 2-66G. Geodesy Utility Programs - - - - - - - -
- - - - - - - - - - - - - - - 2-67
1 Grid Conversion Program - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - 2-682 Traverse Program - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - 2-693 Units Conversion
Program - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2-704 Project Converter - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - 2-715 Geodetic List Conversion- - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - 2-73
IV. Planned Survey Lines and Channel Designs - - - - - - - - - -
- - - - 2-75A. Spacing Planned Lines - - - - - - - - - - - - - - -
- - - - - - - - - - 2-75B. Offset Patterns for Planned Lines - - -
- - - - - - - - - - - - - - - - - 2-76C. Creating Planned Lines in
the Line Editor - - - - - - - - - - - - - - - - 2-78
1 Line Naming Options - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - 2-792 Creating 2-Dimensional Planned Lines -
Spreadsheet Method - - - - - - - - - - - - 2-803 Creating
2-Dimensional Planned Lines Using the Cursor and Offset Technique -
- - - 2-824 Importing Waypoints From a Text File to the LINE EDITOR
- - - - - - - - - - - - 2-855 Importing *.LIN and *.N83 Files to
the Line Editor - - - - - - - - - - - - - - - - - 2-866 Creating
Planned Lines to Fit Your Survey Area- - - - - - - - - - - - - - -
- - - - 2-877 Generating Planned Lines at Predefined Locations - -
- - - - - - - - - - - - - - - - 2-89iv
-
Table of Contents8 Editing your Planned Line File in the Line
Editor - - - - - - - - - - - - - - - - - - -2-919 Creating
3-dimensional Planned Lines in the Line Editor - - - - - - - - - -
- - - - -2-9410 Appending Line Files - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - -2-9811 Creating Waypoints Using
Distance and Bearing - - - - - - - - - - - - - - - - - - -2-9912
Creating Curved Lines with the Line Editor - - - - - - - - - - - -
- - - - - - - - - -2-9913 Exporting Template Points to XYZ - - - -
- - - - - - - - - - - - - - - - - - - - - 2-101
D. Creating Planned Lines in Channel Design - - - - - - - - - -
- - - - - 2-1021 Running Channel Design- - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - 2-1032 Entering your Center line
Coordinates and Chainage in Channel Design - - - - - - - 2-1043
Entering Toe Line and Turning Basin Information in Channel Design -
- - - - - - - 2-1054 Setting your Channel Parameters in Channel
Design- - - - - - - - - - - - - - - - - 2-1095 Previewing your
Planned Lines in Channel Design - - - - - - - - - - - - - - - - -
2-1146 Saving your Survey Lines and Channel Information in Channel
Design- - - - - - - - 2-116
E. Creating A Planned Line File from a DXF or DGN File - - - - -
- - - 2-117F. Creating Planned Lines in the LNW Generator - - - - -
- - - - - - - - 2-120G. Reporting Distances Along Line- - - - - - -
- - - - - - - - - - - - - 2-122
V. Border Files - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - -2-123A. Creating a Border File with the Cursor Method- -
- - - - - - - - - - - 2-123B. Creating a Border File with the
Spreadsheet Method - - - - - - - - - - 2-125C. Importing Border
Points To the Border Editor - - - - - - - - - - - - - 2-126D.
Border Reports - - - - - - - - - - - - - - - - - - - - - - - - - -
- - 2-128
VI. Hardware Setup in HYPACK - - - - - - - - - - - - - - - - - -
- -2-129A. Mobiles and Mobile Settings - - - - - - - - - - - - - -
- - - - - - - 2-131
1 Adding a Mobile - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - 2-1312 Assigning the Tracking Point in HYPACK
HARDWARE - - - - - - - - - - - - - 2-1323 Assigning a Boat Shape to
Each Mobile - - - - - - - - - - - - - - - - - - - - - - 2-133
B. System Settings - - - - - - - - - - - - - - - - - - - - - - -
- - - - 2-135C. Configuring your Devices- - - - - - - - - - - - - -
- - - - - - - - - 2-136
1 Specifying Devices in HYPACK HARDWARE - - - - - - - - - - - -
- - - - - - 2-1362 HYPACK Device Functions and Options - - - - - -
- - - - - - - - - - - - - - - 2-1393 Connection Information in
HYPACK HARDWARE- - - - - - - - - - - - - - - - 2-1414 Offsets and
Latency - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - 2-1515 Station Information in HYPACK HARDWARE - - - - - - - - -
- - - - - - - - - 2-159
D. Disabling Devices in the HYPACK HARDWARE - - - - - - - - - -
2-161E. Time-Tagging Your Data - - - - - - - - - - - - - - - - - -
- - - - - 2-162
1 Applying a Fixed Latency - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - 2-1632 Synchronizing the Computer Clock to UTC
Time Using the ZDA Message - - - - - - 2-1643 Synchronizing the
Computer Clock to UTC Time Using a 1PPS Box - - - - - - - - -
2-164
F. Managing Multiple Hardware Configurations - - - - - - - - - -
- - - 2-166
VII. Calibrating your Hardware - - - - - - - - - - - - - - - - -
- - - - -2-168A. Confirming Time Synchronization with the ZDA TEST
- - - - - - - - 2-169B. Measuring GPS Latency in Single Beam
Configurations - - - - - - - - 2-171
1 Calculating Latency Offsets in the Latency Test - - - - - - -
- - - - - - - - - - - - 2-171Last Updated February / 2014 v
-
Table of Contents2 Latency Test History - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - 2-174C. Bar Checks - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - 2-175D. Multibeam
Bar Check Tool - - - - - - - - - - - - - - - - - - - - - - 2-177E.
Multibeam PATCH TEST - - - - - - - - - - - - - - - - - - - - - -
2-179
1 PATCH TEST Procedure- - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - 2-1802 PATCH TEST Data Collection - - - - - - - -
- - - - - - - - - - - - - - - - - - - 2-1813 PATCH TEST Interface
in the HYSWEEP EDITOR- - - - - - - - - - - - - - - - 2-1844 PATCH
TEST Interface in the 64-bit HYSWEEP EDITOR - - - - - - - - - - - -
2-1865 Calculating Offset Adjustments with the 32-bit PATCH TEST -
- - - - - - - - - - - 2-1876 Calculating Offset Adjustments with
the 64-bit PATCH TEST - - - - - - - - - - - - 2-188
F. Topographic Laser PATCH TEST - - - - - - - - - - - - - - - -
- - - 2-1921 Patch Test Data Collection For Laser Systems - - - - -
- - - - - - - - - - - - - - - 2-1942 Processing Patch Test Data for
Topographic Laser Systems - - - - - - - - - - - - - 2-195
G. Finalizing Hardware Offsets Using Calibration Test Results -
- - - - - 2-197H. Correcting Offset and Latency Errors in Survey
Data- - - - - - - - - - 2-200
VIII.Hardware Notes - - - - - - - - - - - - - - - - - - - - - -
- - - - - - 2-202A. HYSWEEP HARDWARE Setup in HYPACK - - - - - - -
- - - - 2-202B. Towfish with Simple Layback - - - - - - - - - - - -
- - - - - - - - 2-202
1 Towfish Device Setup in HYPACK HARDWARE- - - - - - - - - - - -
- - - - - 2-2032 Specifying Cable Out in Survey- - - - - - - - - -
- - - - - - - - - - - - - - - - - 2-2043 Real Time Towfish Altitude
- - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-2054
Towfish with TrackPoint Systems - - - - - - - - - - - - - - - - - -
- - - - - - - 2-207
C. Dredge Configurations - - - - - - - - - - - - - - - - - - - -
- - - - 2-2081 Cutter Suction Dredge Configuration - - - - - - - -
- - - - - - - - - - - - - - - - 2-2092 Hopper Dredge Hardware
Configuration - - - - - - - - - - - - - - - - - - - - - - 2-2113
Excavator Dredge Hardware Configuration - - - - - - - - - - - - - -
- - - - - - - 2-2144 Bucket Dredge Hardware Configuration- - - - -
- - - - - - - - - - - - - - - - - - 2-216
D. Monitoring Multiple Vessels with Wireless Connections - - - -
- - - - 2-2171 Pitcher.dll - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - 2-2182 Shared Memory Output - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - 2-2193
Broadcasting Your GPS Data over the Network - - - - - - - - - - - -
- - - - - - - 2-2194 Broadcasting Survey Windows over the Network
to the Survey Viewer - - - - - - - - 2-2205 Monitoring SURVEY over
the Network with the WebIF Driver - - - - - - - - - - - 2-2216
Monitoring Vessels with the Automated Identification System - - - -
- - - - - - - - 2-224
IX. Matrix Files (*MTX) - - - - - - - - - - - - - - - - - - - -
- - - - - - 2-226A. Creating a Matrix File with the Matrix Editor -
- - - - - - - - - - - - 2-226B. Matrix File View Options in HYPACK
- - - - - - - - - - - - - - - 2-228C. Filling a Matrix File with
Sounding Data - - - - - - - - - - - - - - - 2-229
1 Filling a Matrix with Soundings in the XYZ to Matrix Program -
- - - - - - - - - - 2-2292 Filling a Matrix with Uniform Depth - -
- - - - - - - - - - - - - - - - - - - - - - 2-231
D. Filling a Matrix with Channel Template Depths - - - - - - - -
- - - - 2-232E. Extracting Sounding Data from your Matrix - - - - -
- - - - - - - - - 2-233F. Editing an Existing Matrix File - - - - -
- - - - - - - - - - - - - - - 2-234vi
-
Table of ContentsX. Target Files (*TGT) - - - - - - - - - - - -
- - - - - - - - - - - - - -2-235A. Creating a New Target File - - -
- - - - - - - - - - - - - - - - - - - 2-235B. Importing Target
Positions from Text Files - - - - - - - - - - - - - - - 2-236C.
Editing an Existing Target File - - - - - - - - - - - - - - - - - -
- - 2-238D. Translating Targets in the Target Editor - - - - - - -
- - - - - - - - - 2-238E. Target Display Options - - - - - - - - -
- - - - - - - - - - - - - - - 2-239F. Reviewing Target Information
in the Target Viewer- - - - - - - - - - - 2-241G. Target
Classification - - - - - - - - - - - - - - - - - - - - - - - - -
2-243
1 Building the Target Classification Database - - - - - - - - -
- - - - - - - - - - - - 2-2432 Classifying your Targets in the
TARGET VIEWER - - - - - - - - - - - - - - - - - 2-245
H. Exporting Target Information - - - - - - - - - - - - - - - -
- - - - - 2-2471 Exporting Target Information from the TARGET
EDITOR - - - - - - - - - - - - - 2-2482 Exporting Target
Information from the TARGET VIEWER - - - - - - - - - - - - -
2-249
XI. Plotting Sheets (*.PLT) - - - - - - - - - - - - - - - - - -
- - - - - - -2-251A. Creating Plotting Sheets in the Plotting Sheet
Editor - - - - - - - - - - 2-251B. Editing an Existing Plotting
Sheet File in the Plotting Sheet Editor - - - 2-253C. Generating
Plotting Sheet Layout Graphics - - - - - - - - - - - - - -
2-254
XII. TPU Editor - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - -2-256A. Setting your TPU Parameters - - - - - - - - -
- - - - - - - - - - - - 2-256B. Exporting TPU Parameter Reports- -
- - - - - - - - - - - - - - - - - 2-260C. Managing Multiple TPU
Configurations - - - - - - - - - - - - - - - - 2-261
SURVEY- - - - - - - - - - - - - - - - - - - - - - - -3-1I.
HYPACK SURVEY - - - - - - - - - - - - - - - - - - - - - - - - - -
3-3
A. Windows in SURVEY - - - - - - - - - - - - - - - - - - - - - -
- - - 3-41 Area Map in SURVEY- - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - 3-52 Left-Right Indicator in SURVEY - - -
- - - - - - - - - - - - - - - - - - - - - - - - 3-73 Data Display
Window in SURVEY- - - - - - - - - - - - - - - - - - - - - - - - - -
3-84 Profile Window in SURVEY - - - - - - - - - - - - - - - - - - -
- - - - - - - - - -3-115 3D Matrix Window in SURVEY - - - - - - - -
- - - - - - - - - - - - - - - - - - -3-146 Device Windows in SURVEY
- - - - - - - - - - - - - - - - - - - - - - - - - - - -3-177 GPS
Graphs in SURVEY - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - -3-198 Comments in SURVEY - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - -3-219 Alarms in SURVEY - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -3-2110 Configuring
your Window Display with the Window Manager - - - - - - - - - - - -
-3-22
B. Shared Memory Programs - - - - - - - - - - - - - - - - - - -
- - - - 3-241 Memory Viewer - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - -3-242 Shared Memory Output Program - -
- - - - - - - - - - - - - - - - - - - - - - - - -3-263 NMEA Output-
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-3-304 Odometer - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -3-315 Graphical Motion Reference Unit- - - -
- - - - - - - - - - - - - - - - - - - - - - -3-32Last Updated
February / 2014 vii
-
Table of Contents6 Heading and Speed Indicator - - - - - - - - -
- - - - - - - - - - - - - - - - - - - 3-32C. Configuring your Area
Map Display in SURVEY - - - - - - - - - - - - 3-33
1 Loading Files to your Area Map Display in SURVEY - - - - - - -
- - - - - - - - - 3-332 Area Map Display Controls in SURVEY - - - -
- - - - - - - - - - - - - - - - - - 3-34
D. Boat Features in HYPACK SURVEY - - - - - - - - - - - - - - -
- - 3-371 Specifying the Main Vessel in SURVEY - - - - - - - - - -
- - - - - - - - - - - - 3-392 Boat Shapes and Symbols in SURVEY - -
- - - - - - - - - - - - - - - - - - - - - 3-393 Boat Track
Parameters in SURVEY- - - - - - - - - - - - - - - - - - - - - - - -
- 3-424 Position Filters in SURVEY - - - - - - - - - - - - - - - -
- - - - - - - - - - - - 3-435 Multiple Position Devices on One
Mobile in SURVEY - - - - - - - - - - - - - - - 3-446 Precise Mobile
Positioning - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- 3-457 Multiple Tracking Points - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - 3-478 Example of Precise Positioning with
Multiple Tracking Points - - - - - - - - - - - - 3-529 Anchors in
SURVEY - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- 3-5410 Anchor Management Using the AnchorManager Device Driver -
- - - - - - - - - - 3-57
E. Chart (Background) Files in SURVEY - - - - - - - - - - - - -
- - - - 3-591 Loading Charts during SURVEY - - - - - - - - - - - -
- - - - - - - - - - - - - - 3-602 Unloading Charts during SURVEY -
- - - - - - - - - - - - - - - - - - - - - - - - 3-613 Displaying
Hazard Contours in SURVEY - - - - - - - - - - - - - - - - - - - - -
- 3-61
F. Targets in SURVEY - - - - - - - - - - - - - - - - - - - - - -
- - - - 3-631 Loading a Target File in SURVEY - - - - - - - - - - -
- - - - - - - - - - - - - - 3-632 Selecting Targets in SURVEY - - -
- - - - - - - - - - - - - - - - - - - - - - - - 3-643 Marking
Targets in SURVEY - - - - - - - - - - - - - - - - - - - - - - - - -
- - 3-654 Erasing and Restoring Targets in SURVEY - - - - - - - - -
- - - - - - - - - - - - 3-655 Target Properties in SURVEY - - - - -
- - - - - - - - - - - - - - - - - - - - - - 3-666 Target Display
Defaults in SURVEY - - - - - - - - - - - - - - - - - - - - - - - -
3-677 Water's Edge Targets- - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - 3-688 Connecting Targets with Survey Lines in
SURVEY - - - - - - - - - - - - - - - - - 3-699 Connecting Targets
to the Boat Position in SURVEY - - - - - - - - - - - - - - - -
3-69
G. Matrix Files in SURVEY - - - - - - - - - - - - - - - - - - -
- - - - - 3-701 Loading and Unloading Matrix Files in SURVEY - - -
- - - - - - - - - - - - - - - 3-712 Multiple Matrix Files- - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - 3-713
Auto-Matrix - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - 3-724 Saving Soundings to a Matrix in SURVEY - - -
- - - - - - - - - - - - - - - - - - 3-745 Editing Matrix Depths in
SURVEY - - - - - - - - - - - - - - - - - - - - - - - - - 3-776
Matrix Display Options in SURVEY - - - - - - - - - - - - - - - - -
- - - - - - - 3-797 Matrix Color Settings in SURVEY - - - - - - - -
- - - - - - - - - - - - - - - - - 3-828 Saving Matrix Files in
SURVEY - - - - - - - - - - - - - - - - - - - - - - - - - - 3-84
H. Corrections in SURVEY - - - - - - - - - - - - - - - - - - - -
- - - - 3-851 Tide Corrections in SURVEY - - - - - - - - - - - - -
- - - - - - - - - - - - - - 3-852 Draft Corrections in SURVEY - - -
- - - - - - - - - - - - - - - - - - - - - - - - 3-873 Heave Drift
Correction in SURVEY - - - - - - - - - - - - - - - - - - - - - - -
- 3-91
I. Navigating Planned Lines in SURVEY - - - - - - - - - - - - -
- - - - 3-911 Selecting Survey Lines in SURVEY - - - - - - - - - -
- - - - - - - - - - - - - - 3-922 Changing Survey Direction - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - 3-93viii
-
Table of Contents3 Selecting Segments on Multiple Segment Lines
in SURVEY- - - - - - - - - - - - - -3-94J. Adding New Lines in
SURVEY - - - - - - - - - - - - - - - - - - - - - 3-94
1 Digitizing Planned Lines in SURVEY - - - - - - - - - - - - - -
- - - - - - - - - -3-942 Creating Parallel Line Offsets in SURVEY -
- - - - - - - - - - - - - - - - - - - - -3-95
K. Logging Data in SURVEY - - - - - - - - - - - - - - - - - - -
- - - - 3-951 Project Information in SURVEY - - - - - - - - - - - -
- - - - - - - - - - - - - - -3-972 Raw Data File Options in SURVEY
- - - - - - - - - - - - - - - - - - - - - - - - -3-983 Logging
Events in SURVEY - - - - - - - - - - - - - - - - - - - - - - - - -
- - - 3-1004 Logging Seabed Identification Data in SURVEY - - - - -
- - - - - - - - - - - - - 3-1015 Recording Comments in SURVEY - - -
- - - - - - - - - - - - - - - - - - - - - - 3-103
L. Printing Survey Data - - - - - - - - - - - - - - - - - - - -
- - - - - 3-104
II. SIDE SCAN SURVEY - - - - - - - - - - - - - - - - - - - - - -
- - -3-107A. Side Scan Survey Windows - - - - - - - - - - - - - - -
- - - - - - - 3-107
1 Main Window in Side Scan Survey - - - - - - - - - - - - - - -
- - - - - - - - - - 3-1082 Side Scan Signal Window - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - 3-1103 Side Scan Coverage
Map- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3-1114 Side Scan Altitude Window - - - - - - - - - - - - - - - - -
- - - - - - - - - - - 3-1125 Towfish Sensors Window in Side Scan
Survey - - - - - - - - - - - - - - - - - - - 3-1136 Message Window
in Side Scan Survey - - - - - - - - - - - - - - - - - - - - - - -
3-1137 Graphical MRU in SIDE SCAN SURVEY - - - - - - - - - - - - -
- - - - - - - - 3-113
B. View Options in Side Scan Survey- - - - - - - - - - - - - - -
- - - - 3-1141 Device Selections in SIDE SCAN SURVEY - - - - - - -
- - - - - - - - - - - - - 3-1152 Side Scan Coverage Map View
Options- - - - - - - - - - - - - - - - - - - - - - - 3-1163 Side
Scan Waterfall Controls - - - - - - - - - - - - - - - - - - - - - -
- - - - - - 3-1174 Other Side Scan Survey View Options - - - - - -
- - - - - - - - - - - - - - - - - 3-122
C. Logging Data in Side Scan Survey- - - - - - - - - - - - - - -
- - - - 3-1231 Side Scan Device Controls - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - 3-1232 Log Backup and Data File
Overlap in SIDE SCAN SURVEY - - - - - - - - - - - - 3-1243 Matrix
Files in Side Scan Survey - - - - - - - - - - - - - - - - - - - - -
- - - - - 3-1244 Targeting and Target Files in Side Scan Survey - -
- - - - - - - - - - - - - - - - - 3-126
D. Using the Coverage Driver to Monitor Side Scan Coverage - - -
- - - - 3-127E. Side Scan Playback - - - - - - - - - - - - - - - -
- - - - - - - - - - 3-129
III. HYSWEEP SURVEY - - - - - - - - - - - - - - - - - - - - - -
- -3-131A. HYSWEEP SURVEY Display Windows - - - - - - - - - - - - -
- - 3-131
1 Main Window in HYSWEEP SURVEY- - - - - - - - - - - - - - - - -
- - - - - 3-1312 Profile Window in HYSWEEP SURVEY - - - - - - - - -
- - - - - - - - - - - - 3-1343 3D Seafloor in HYSWEEP SURVEY - - -
- - - - - - - - - - - - - - - - - - - - 3-1354 Waterfalls and Shore
View in HYSWEEP SURVEY - - - - - - - - - - - - - - - 3-1365
Coverage Map and Cross Section Windows in HYSWEEP SURVEY- - - - - -
- - 3-1386 Interferometry Window in HYSWEEP SURVEY - - - - - - - -
- - - - - - - - - 3-1407 Topography Window in HYSWEEP SURVEY - - -
- - - - - - - - - - - - - - - 3-1408 Limits Window in HYSWEEP
SURVEY - - - - - - - - - - - - - - - - - - - - - 3-1419 Nadir
Window In HYSWEEP SURVEY - - - - - - - - - - - - - - - - - - - - -
3-14210 QC Test Window HYSWEEP SURVEY - - - - - - - - - - - - - - -
- - - - - - 3-142Last Updated February / 2014 ix
-
Table of Contents11 Time Series Windows in HYSWEEP SURVEY - - -
- - - - - - - - - - - - - - - 3-14412 Total Propagated Uncertainty
in the HYSWEEP SURVEY - - - - - - - - - - - - - 3-14413 Message
Window in HYSWEEP SURVEY - - - - - - - - - - - - - - - - - - - -
3-14514 Device Control Windows in HYSWEEP SURVEY - - - - - - - - -
- - - - - - - 3-14515 Graphical MRU in HYSWEEP SURVEY - - - - - - -
- - - - - - - - - - - - - - 3-146
B. Display Settings in HYSWEEP SURVEY - - - - - - - - - - - - -
- 3-1461 Device Selections in HYSWEEP SURVEY - - - - - - - - - - -
- - - - - - - - - 3-1472 Range Settings in HYSWEEP SURVEY - - - - -
- - - - - - - - - - - - - - - - 3-1483 Multibeam Display Settings
in HYSWEEP SURVEY - - - - - - - - - - - - - - - 3-1504 QC Test
Settings in HYSWEEP SURVEY - - - - - - - - - - - - - - - - - - - -
3-1515 Coverage Map Settings in HYSWEEP SURVEY - - - - - - - - - -
- - - - - - - 3-1526 Other Display Settings in HYSWEEP SURVEY - - -
- - - - - - - - - - - - - - - 3-1537 Color Settings in HYSWEEP
SURVEY - - - - - - - - - - - - - - - - - - - - - - 3-154
C. Files and Filenames in HYSWEEP SURVEY - - - - - - - - - - - -
3-155D. Corrections in HYSWEEP SURVEY - - - - - - - - - - - - - - -
- 3-156
1 Tide Corrections in HYSWEEP SURVEY- - - - - - - - - - - - - -
- - - - - - - 3-1562 Dynamic Draft Corrections in HYSWEEP SURVEY- -
- - - - - - - - - - - - - - 3-1563 Sound Velocity Corrections in
HYSWEEP SURVEY - - - - - - - - - - - - - - - 3-157
E. Logging Data in HYSWEEP SURVEY - - - - - - - - - - - - - - -
3-1591 Matrix Files in HYSWEEP SURVEY - - - - - - - - - - - - - - -
- - - - - - - - 3-1612 Targeting and Target Files in HYSWEEP SURVEY
- - - - - - - - - - - - - - - - 3-1643 Interferometry in HYSWEEP
SURVEY- - - - - - - - - - - - - - - - - - - - - - 3-1654 Logging
with Laser Scanners in HYSWEEP SURVEY- - - - - - - - - - - - - - -
3-1685 Log Backup and Data File Overlap in HYSWEEP SURVEY - - - - -
- - - - - - - 3-1696 Real-Time Device Controls in HYSWEEP SURVEY -
- - - - - - - - - - - - - - 3-170
F. Playback in HYSWEEP SURVEY - - - - - - - - - - - - - - - - -
3-170
SINGLE BEAM PROCESSING - - - - - - - - - - - - - -4-1I.
Previewing Your Soundings in the Main Window - - - - - - - - - - -
- 4-2
II. Sound Velocity Corrections - - - - - - - - - - - - - - - - -
- - - - - - 4-4A. Creating a Sound Velocity File in the SOUND
VELOCITY Program - - - - 4-4B. Importing Sound Velocity Data - - -
- - - - - - - - - - - - - - - - - - - 4-6
III. SINGLE BEAM EDITOR - - - - - - - - - - - - - - - - - - - -
- - - - 4-8A. SINGLE BEAM EDITOR Procedure - - - - - - - - - - - -
- - - - - - - 4-8B. Selecting Sounding Files in the SINGLE BEAM
EDITOR - - - - - - - - 4-10C. Corrections in the SINGLE BEAM EDITOR
- - - - - - - - - - - - - - 4-11
1 Manually Editing Correction Values in the SINGLE BEAM EDITOR -
- - - - - - - 4-132 Tide Corrections in the SINGLE BEAM EDITOR - -
- - - - - - - - - - - - - - - - 4-143 Sound Velocity Corrections in
the SINGLE BEAM EDITOR - - - - - - - - - - - - 4-174 True Heave
Corrections on the SINGLE BEAM EDITOR - - - - - - - - - - - - - -
4-205 Dynamic Draft Adjustments in the SINGLE BEAM EDITOR - - - - -
- - - - - - - 4-216 Merging Corrections in the SINGLE BEAM EDITOR -
- - - - - - - - - - - - - - - 4-22x
-
Table of ContentsD. Read Parameters in the SINGLE BEAM EDITOR -
- - - - - - - - - - - 4-231 Selections Tab in the SINGLE BEAM
EDITOR Read Parameters - - - - - - - - - - -4-232 Offsets Tab in
the SINGLE BEAM EDITOR Read Parameters- - - - - - - - - - - -
-4-243 Survey Information Tab in the SINGLE BEAM EDITOR Read
Parameters - - - - - - -4-254 Presort Tab in the SINGLE BEAM EDITOR
Read Parameters - - - - - - - - - - - - -4-255 GPS Pre-Filter
Settings in the SINGLE BEAM EDITOR - - - - - - - - - - - - - -
-4-266 Advanced Read Parameters in the SINGLE BEAM EDITOR - - - - -
- - - - - - - -4-27
E. Merging Digitized Depth Data with Raw Survey Data - - - - - -
- - - - 4-33F. Windows in the SINGLE BEAM EDITOR- - - - - - - - - -
- - - - - - 4-33
1 Profile Window in the SINGLE BEAM EDITOR - - - - - - - - - - -
- - - - - - - -4-342 Survey Window in the SINGLE BEAM EDITOR - - -
- - - - - - - - - - - - - - - -4-353 Spreadsheet Window in the
SINGLE BEAM EDITOR - - - - - - - - - - - - - - - -4-364 Sound
Velocity Corrections Window in the SINGLE BEAM EDITOR - - - - - - -
- -4-375 Tide and Draft Corrections Window in the SINGLE BEAM
EDITOR - - - - - - - - -4-386 Heave Window in the SINGLE BEAM
EDITOR - - - - - - - - - - - - - - - - - - -4-387 Pitch Roll and
Heading Window in the SINGLE BEAM EDITOR - - - - - - - - - - -4-398
Echogram Window in the SINGLE BEAM EDITOR - - - - - - - - - - - - -
- - - -4-399 Comments Window in HYSWEEP SURVEY - - - - - - - - - -
- - - - - - - - - -4-41
G. Display Settings in the SINGLE BEAM EDITOR - - - - - - - - -
- - - 4-421 Profile Window Display Settings in the SINGLE BEAM
EDITOR - - - - - - - - - - -4-422 Survey Window Display Settings in
the SINGLE BEAM EDITOR- - - - - - - - - - -4-453 Spreadsheet Window
Display Settings in the SINGLE BEAM EDITOR - - - - - - - -4-464
Echogram Display Settings in the SINGLE BEAM EDITOR- - - - - - - -
- - - - - -4-475 Other Display Settings in the SINGLE BEAM EDITOR -
- - - - - - - - - - - - - - -4-47
H. Search and Filter Options in the SINGLE BEAM EDITOR - - - - -
- - - 4-48I. SINGLE BEAM EDITOR Statistics - - - - - - - - - - - -
- - - - - - - 4-51J. Editing Sounding Data in the SINGLE BEAM
EDITOR - - - - - - - - - 4-52
1 Manual Editing Single Beam Data - - - - - - - - - - - - - - -
- - - - - - - - - - -4-522 Automatic Editing Single Beam Data - - -
- - - - - - - - - - - - - - - - - - - - - -4-573 Marking Golden
Soundings in the SINGLE BEAM EDITOR - - - - - - - - - - - - -4-584
Smoothing Your Data in the SINGLE BEAM EDITOR - - - - - - - - - - -
- - - - -4-59
K. Data Other Than Soundings in the SINGLE BEAM EDITOR - - - - -
- - 4-62L. Targets in the SINGLE BEAM EDITOR - - - - - - - - - - -
- - - - - - 4-62
1 Displaying Targets in SINGLE BEAM EDITOR - - - - - - - - - - -
- - - - - - - -4-622 Marking Targets in the SINGLE BEAM EDITOR- - -
- - - - - - - - - - - - - - - -4-63
M. Saving Edited Data in the SINGLE BEAM EDITOR - - - - - - - -
- - - 4-631 Saving to the ALL Format - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - -4-642 Saving to XYZ Format- - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - -4-65
N. Exporting Edited Single Beam Data to a Text File - - - - - -
- - - - - - 4-65
IV. Sounding Selection Programs for Single Beam Surveys - - - -
- - - - - 4-67A. Comparison of Sounding Selection Methods for
Single Beam Data - - - - 4-67B. SB SELECTION - - - - - - - - - - -
- - - - - - - - - - - - - - - - - 4-69
1 Running SB SELECTION - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - -4-692 Display Options in SB SELECTION - - - - - -
- - - - - - - - - - - - - - - - - - -4-70Last Updated February /
2014 xi
-
Table of Contents3 Sounding Selection Options in SB SELECTION- -
- - - - - - - - - - - - - - - - - 4-704 Golden Soundings in SB
SELECTION - - - - - - - - - - - - - - - - - - - - - - - 4-71
C. MAPPER Program - - - - - - - - - - - - - - - - - - - - - - -
- - - - 4-731 Running the Mapper Program - - - - - - - - - - - - -
- - - - - - - - - - - - - - 4-742 Mapper Options - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - 4-763 Exporting
Data from Mapper - - - - - - - - - - - - - - - - - - - - - - - - -
- - - 4-804 Seabed Identification in Mapper - - - - - - - - - - - -
- - - - - - - - - - - - - - 4-83
D. SORT Program - - - - - - - - - - - - - - - - - - - - - - - -
- - - - 4-861 Running the SORT Program - - - - - - - - - - - - - -
- - - - - - - - - - - - - - 4-862 Sort Options - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - 4-88
E. CROSS SORT Program - - - - - - - - - - - - - - - - - - - - -
- - - 4-91
V. Clipping Survey Files - - - - - - - - - - - - - - - - - - - -
- - - - - 4-93
VI. MAGNETOMETER EDITOR - - - - - - - - - - - - - - - - - - - -
- 4-95A. Running the MAGNETOMETER EDITOR - - - - - - - - - - - - -
- - 4-96B. Read Parameters in the MAGNETOMETER EDITOR - - - - - - -
- - - 4-97
1 Selections Tab in the MAGNETOMETER EDITOR Read Parameters - -
- - - - - - 4-972 Offsets Tab in the MAGNETOMETER EDITOR Read
Parameters - - - - - - - - - - 4-983 Survey Info Tab in the
MAGNETOMETER EDITOR Read Parameters- - - - - - - - 4-994 GPS
Pre-filter Tab in the MAGNETOMETER EDITOR Read Parameters - - - - -
- 4-99
C. Entering Shore-based Correction Parameters- - - - - - - - - -
- - - - 4-100D. Windows in the MAGNETOMETER EDITOR - - - - - - - -
- - - - 4-101
1 Survey Window in the MAGNETOMETER EDITOR - - - - - - - - - - -
- - - - - 4-1022 Profile Window in the MAGNETOMETER EDITOR - - - -
- - - - - - - - - - - - 4-1033 Spreadsheet Window in the
MAGNETOMETER EDITOR- - - - - - - - - - - - - - 4-1044 Depth Display
in the MAGNETOMETER EDITOR - - - - - - - - - - - - - - - - - 4-1055
Shore Corrections for Current Line in the MAGNETOMETER EDITOR - - -
- - - - 4-1056 Shore Data Table in the MAGNETOMETER EDITOR - - - -
- - - - - - - - - - - 4-106
E. Display Settings in the MAGNETOMETER EDITOR - - - - - - - - -
4-1071 View Options Profile Window Tab - - - - - - - - - - - - - -
- - - - - - - - - - - 4-1072 View Options Spreadsheet Tab - - - - -
- - - - - - - - - - - - - - - - - - - - - - 4-1083 View Options
Survey Window Tab - - - - - - - - - - - - - - - - - - - - - - - - -
4-1084 View Options Other Tab - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - 4-109
F. Search and Filter Options in the MAGNETOMETER EDITOR- - - - -
- 4-111G. Saving Edited Data in the MAGNETOMETER EDITOR- - - - - -
- - 4-113
1 Saving to the ALL Format - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - 4-1132 Saving to XYZ Format - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - 4-114
H. Exporting Data from the Spreadsheet Window to a Text File - -
- - - - 4-114I. Exporting Data from the Shore Data Table to a Text
File - - - - - - - - 4-116
SIDE SCAN PROCESSING - - - - - - - - - - - - - - - -5-1I. SIDE
SCAN DATA REFORMATTER - - - - - - - - - - - - - - - - - - 5-2
A. Converting Side Scan Data to HSX Format - - - - - - - - - - -
- - - - - 5-2xii
-
Table of Contents1 HSX Conversion Options for Benthos C3D Data -
- - - - - - - - - - - - - - - - - - 5-42 HSX Conversion Options for
CMax CM2 Data - - - - - - - - - - - - - - - - - - - - 5-53 HSX
Conversion Options for IMG Data - - - - - - - - - - - - - - - - - -
- - - - - 5-64 HSX Conversion Options for Edgetech JSF Data - - - -
- - - - - - - - - - - - - - - 5-65 HSX Conversion Options for
Imagenex 83P Data - - - - - - - - - - - - - - - - - - - 5-96 HSX
Conversion Options for Marine Sonic MSTL Data - - - - - - - - - - -
- - - - -5-107 HSX Conversion Options for Klein 3000 and 5000
Series SDF Data - - - - - - - - - -5-108 HSX Conversion Options for
Reson or Odom XTF Data- - - - - - - - - - - - - - - -5-139 HSX
Conversion Options for Kongsberg Simrad ALL Data - - - - - - - - -
- - - - -5-1410 HSX Conversion Options for R2Sonic RAW - - - - - -
- - - - - - - - - - - - - - -5-1511 HSX Conversion Options for SEA
SWATHPlus SXI or SXP Files - - - - - - - - - - -5-1512 HSX
Conversion Options for the ODOM TDY - - - - - - - - - - - - - - - -
- - - -5-1613 Converting from GPX to HYPACK Raw Format - - - - - -
- - - - - - - - - - - -5-17
B. Converting from HSX - - - - - - - - - - - - - - - - - - - - -
- - - - 5-17C. HSX Utilities- - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - 5-18D. XTF Utilities - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - 5-20E. Additional Utilities - - -
- - - - - - - - - - - - - - - - - - - - - - - - 5-22
II. Side Scan Mosaic - - - - - - - - - - - - - - - - - - - - - -
- - - - - - 5-24A. Running Side Scan Mosaic - - - - - - - - - - - -
- - - - - - - - - - - 5-24B. Loading Data to Side Scan Mosaic - - -
- - - - - - - - - - - - - - - - 5-25C. Setting Side Scan Mosaic
Display Options - - - - - - - - - - - - - - - - 5-31
1 Side Scan Controls - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - -5-312 View Options Dialog- General Tab - - - -
- - - - - - - - - - - - - - - - - - - - - -5-343 View Options
Dialog- Scan View Tab - - - - - - - - - - - - - - - - - - - - - - -
-5-354 View Options Dialog- Spreadsheet Tab - - - - - - - - - - - -
- - - - - - - - - - - -5-365 View Options Dialog- Targets Tab - - -
- - - - - - - - - - - - - - - - - - - - - - -5-376 View Options
Dialog- Advanced Tab - - - - - - - - - - - - - - - - - - - - - - -
- -5-39
D. Editing your Side Scan Data - - - - - - - - - - - - - - - - -
- - - - - 5-391 Editing Track Lines in Side Scan Mosaic - - - - - -
- - - - - - - - - - - - - - - - -5-402 Editing Heading in Side Scan
Mosaic - - - - - - - - - - - - - - - - - - - - - - - - -5-413
Towfish Altitude in Side Scan Mosaic - - - - - - - - - - - - - - -
- - - - - - - - -5-42
E. Scan View - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - 5-441 Editing Layback and Sound Velocity in Side Scan
Mosaic - - - - - - - - - - - - - - -5-462 Marking Targets in Scan
View - - - - - - - - - - - - - - - - - - - - - - - - - - - -5-463
Measuring Objects in the Targets Window - - - - - - - - - - - - - -
- - - - - - - -5-494 Screen Captures in Scan View - - - - - - - - -
- - - - - - - - - - - - - - - - - - -5-515 Reviewing Targets in the
TARGET VIEWER- - - - - - - - - - - - - - - - - - - - -5-526
Adjusting Target Positions - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - -5-537 Converting the Side Scan Coverage Map to
Georeferenced TIF Files - - - - - - - - - -5-558 Printing the Scan
View Image - - - - - - - - - - - - - - - - - - - - - - - - - - -
-5-569 Exporting Spreadsheet Information from Scan View- - - - - -
- - - - - - - - - - - -5-57
F. Creating Georeferenced TIF or PDF Files in Mosaic Mode - - -
- - - - - 5-581 Mosaic Mode Interface- - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - -5-592 Choosing your Mosaic Area -
- - - - - - - - - - - - - - - - - - - - - - - - - - - -5-60Last
Updated February / 2014 xiii
-
Table of Contents3 Optimizing the Image Resolution in Side Scan
Mosaic - - - - - - - - - - - - - - - - 5-614 Setting your Blending
Options - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-635
Constructing Mosaics and TIF or PDF Files from Side Scan Data- - -
- - - - - - - - 5-646 Merging Georeferenced TIF Files - - - - - - -
- - - - - - - - - - - - - - - - - - - 5-67
III. GEOCODER With Side Scan Data - - - - - - - - - - - - - - -
- - 5-70A. Running GEOCODER with Side Scan Data - - - - - - - - - -
- - - - 5-70B. Calibration Settings in GEOCODER - - - - - - - - - -
- - - - - - - 5-73C. GEOCODER Mosaic Options - - - - - - - - - - -
- - - - - - - - - 5-75D. Saving your Mosaic from GEOCODER- - - - -
- - - - - - - - - - - 5-77
HYSWEEP - - - - - - - - - - - - - - - - - - - - -6-1I. HYSWEEP
EDITOR - - - - - - - - - - - - - - - - - - - - - - - - - 6-4
A. HYSWEEP EDITOR Procedure- - - - - - - - - - - - - - - - - - -
- - 6-4B. Selecting Sounding Files in the HYSWEEP EDITOR - - - - -
- - - - - 6-6C. File Open Options in the HYSWEEP EDITOR- - - - - -
- - - - - - - - 6-7D. Corrections in the HYSWEEP EDITOR - - - - - -
- - - - - - - - - - - 6-8
1 Tide Corrections in the HYSWEEP EDITOR - - - - - - - - - - - -
- - - - - - - - 6-92 Sound Velocity Corrections in the HYSWEEP
EDITOR - - - - - - - - - - - - - - 6-143 Extracting Tide and Sound
Velocity Data in the HYSWEEP EDITOR - - - - - - - 6-164 Draft
Corrections in the HYSWEEP EDITOR - - - - - - - - - - - - - - - - -
- - 6-17
E. Read Parameters in the HYSWEEP EDITOR - - - - - - - - - - - -
- 6-181 Selections Tab in the HYSWEEP EDITOR Read Parameters - - -
- - - - - - - - - 6-182 Device Information in the HYSWEEP EDITOR
Read Parameters - - - - - - - - - 6-193 Survey Information in the
HYSWEEP EDITOR Read Parameters - - - - - - - - - 6-204 Presort Tab
in the HYSWEEP EDITOR Read Parameters - - - - - - - - - - - - -
6-205 GPS Pre-Filter Settings in the HYSWEEP EDITOR - - - - - - - -
- - - - - - - - 6-216 Advanced Read Parameters in the HYSWEEP
EDITOR - - - - - - - - - - - - - - 6-22
F. Windows in the HYSWEEP EDITOR - - - - - - - - - - - - - - - -
- 6-251 The HYSWEEP EDITOR Shell - - - - - - - - - - - - - - - - -
- - - - - - - - - 6-262 Sound Velocity Profile Window in the
HYSWEEP EDITOR - - - - - - - - - - - - 6-263 Pitch, Roll and
Heading Window in the HYSWEEP EDITOR - - - - - - - - - - - 6-264
Heave Window in the HYSWEEP EDITOR - - - - - - - - - - - - - - - -
- - - - 6-285 Tide and Draft Corrections Window in the HYSWEEP
EDITOR - - - - - - - - - - 6-296 Survey Window in the HYSWEEP
EDITOR (Phase 1) - - - - - - - - - - - - - - - 6-297 Sweep Windows
in the HYSWEEP EDITOR - - - - - - - - - - - - - - - - - - - 6-308
Side Scan Window in the HYSWEEP EDITOR - - - - - - - - - - - - - -
- - - - 6-319 Sounding Information Window in the HYSWEEP EDITOR - -
- - - - - - - - - - 6-3210 Survey Window in the HYSWEEP EDITOR
(Phase 3) - - - - - - - - - - - - - - - 6-3311 Profile Window in
the HYSWEEP EDITOR- - - - - - - - - - - - - - - - - - - - 6-3412
Cell Window in the HYSWEEP EDITOR - - - - - - - - - - - - - - - - -
- - - - 6-3413 Comments Window in the HYSWEEP EDITOR- - - - - - - -
- - - - - - - - - - 6-36
G. Display Settings in the HYSWEEP EDITOR- - - - - - - - - - - -
- - 6-36xiv
-
Table of Contents1 Positioning a Light Source Over your Data
Model in the HYSWEEP EDITOR - - - -6-362 Survey Window Display
Settings in the HYSWEEP EDITOR - - - - - - - - - - - -6-373 Profile
Window Display Settings in the HYSWEEP EDITOR - - - - - - - - - - -
-6-404 Cell Window Display Settings in the HYSWEEP EDITOR - - - - -
- - - - - - - -6-415 Raw Data Display Settings in the HYSWEEP
EDITOR - - - - - - - - - - - - - - -6-416 Sweep Window Display
Settings in the HYSWEEP EDITOR - - - - - - - - - - - -6-417 Color
Settings in the HYSWEEP EDITOR - - - - - - - - - - - - - - - - - -
- - -6-438 Other View Options in the HYSWEEP EDITOR - - - - - - - -
- - - - - - - - - -6-44
H. Overlaying a Channel Plan File in the HYSWEEP EDITOR - - - -
- - 6-45I. Targets in the HYSWEEP EDITOR - - - - - - - - - - - - -
- - - - - 6-45
1 Displaying Target Files in the HYSWEEP EDITOR - - - - - - - -
- - - - - - - - -6-452 Creating Targets in the HYSWEEP EDITOR - - -
- - - - - - - - - - - - - - - - -6-46
J. Search and Filter Options in the HYSWEEP EDITOR - - - - - - -
- - 6-461 General Filters in the HYSWEEP EDITOR - - - - - - - - - -
- - - - - - - - - - -6-472 Statistical Filters in the HYSWEEP
EDITOR - - - - - - - - - - - - - - - - - - - -6-503 Search Only
Criteria in the HYSWEEP EDITOR - - - - - - - - - - - - - - - - -
-6-514 Bordering Filters in the HYSWEEP EDITOR - - - - - - - - - -
- - - - - - - - - -6-52
K. Editing Data in the HYSWEEP EDITOR- - - - - - - - - - - - - -
- - 6-521 Standard Editing Operations in HYSWEEP EDITOR - - - - - -
- - - - - - - - - -6-532 Phase One Editing in the HYSWEEP EDITOR -
- - - - - - - - - - - - - - - - - -6-553 Phase Two Editing in the
HYSWEEP EDITOR - - - - - - - - - - - - - - - - - - -6-634
Correcting your Sound Velocity Profile with the Sound Speed
Adjustment Tool - - - -6-655 Matrix Settings in the HYSWEEP EDITOR
- - - - - - - - - - - - - - - - - - - - -6-696 Phase Three Editing
in the HYSWEEP EDITOR - - - - - - - - - - - - - - - - - -6-70
L. File Information in the HYSWEEP EDITOR - - - - - - - - - - -
- - - 6-72M. Restoring Deleted Soundings in the HYSWEEP EDITOR- - -
- - - - - 6-72N. Saving Edited Multibeam Survey Files - - - - - - -
- - - - - - - - - - 6-73
1 File Save Options in the HYSWEEP EDITOR- - - - - - - - - - - -
- - - - - - - -6-742 Sounding Reduction on XYZ Files in the HYSWEEP
EDITOR - - - - - - - - - - -6-75
O. PWC File Splitter- - - - - - - - - - - - - - - - - - - - - -
- - - - - - 6-77
II. 64-bit HYSWEEP EDITOR - - - - - - - - - - - - - - - - - - -
- - 6-78A. Running the 64-bit HYSWEEP EDITOR- - - - - - - - - - - -
- - - - 6-78B. 64-bit HYSWEEP EDITOR Interface - - - - - - - - - -
- - - - - - - 6-79
1 Survey Window in the 64-bit HYSWEEP EDITOR - - - - - - - - - -
- - - - - - -6-812 Speed Editor Window in the 64-bit HYSWEEP EDITOR
- - - - - - - - - - - - - -6-823 Heave/Tide window in the 64-bit
HYSWEEP EDITOR - - - - - - - - - - - - - - -6-834 HPR (Heading,
Pitch, Roll) Editor in the 64-bit HYSWEEP EDITOR - - - - - - -
-6-855 SV (Sound Velocity) Window in the 64-bit HYSWEEP EDITOR - -
- - - - - - - -6-866 Sweep 1 and 2 Windows in the 64-bit HYSWEEP
EDITOR - - - - - - - - - - - - -6-877 Single Sweep Window in the
64-bit HYSWEEP EDITOR - - - - - - - - - - - - - -6-898 Imagery
Window in the 64-bit HYSWEEP EDITOR- - - - - - - - - - - - - - - -
-6-909 Cloud Windows in the 64-bit HYSWEEP EDITOR - - - - - - - - -
- - - - - - - -6-9110 Profile and AB Cross Section Windows in the
64-bit HYSWEEP EDITOR - - - - - -6-9211 Cell Window in the 64-bit
HYSWEEP EDITOR- - - - - - - - - - - - - - - - - - -6-94Last Updated
February / 2014 xv
-
Table of Contents12 Survey Information in the 64-bit HYSWEEP
EDITOR - - - - - - - - - - - - - - - 6-96C. Display Options in
64-bit HYSWEEP EDITOR - - - - - - - - - - - - 6-96
1 Color Settings in 64-bit HYSWEEP EDITOR - - - - - - - - - - -
- - - - - - - - 6-972 Positioning a Light Source Over your Data
Model in the 64-bit HYSWEEP EDITOR 6-1013 View Options Dialog in
the 64-bit HYSWEEP EDITOR - - - - - - - - - - - - - - 6-103
D. 64-bit HYSWEEP EDITOR Options - - - - - - - - - - - - - - - -
6-104E. Corrections in the 64-bit HYSWEEP EDITOR- - - - - - - - - -
- - 6-106F. Tide Corrections in the 64-bit HYSWEEP EDITOR - - - - -
- - - - 6-108
1 Loading a Tide Corrections File in the 64-bit HYSWEEP EDITOR -
- - - - - - - - 6-1092 Setting a Constant Tide Correction Value in
the 64-bit HYSWEEP EDITOR - - - - 6-1093 Replacing Bad RTK Tide- -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-1104
Interpolating Tide Corrections from Multiple Tide Gauges in the
64-bit HYSWEEP EDI-
TOR - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - 6-1115 Offsetting Tide Corrections in the 64-bit
HYSWEEP EDITOR - - - - - - - - - - - 6-114
G. Sound Velocity Corrections in the 64-bit HYSWEEP EDITOR - - -
- 6-1141 Loading Single Sound Velocity Corrections Files - - - - -
- - - - - - - - - - - - - 6-1152 Interpolating Between Multiple
Sound Velocity Files - - - - - - - - - - - - - - - - 6-1163
Correcting your Sound Velocity Profile with the SVP Adjust Tool - -
- - - - - - - - 6-117
H. Dynamic Draft Corrections in the 64-bit HYSWEEP EDITOR - - -
- 6-1211 Applying a Constant Draft Correction in the 64-bit HYSWEEP
EDITOR - - - - - - 6-1212 Smoothing Dynamic Draft Corrections in
the 64-bit HYSWEEP EDITOR - - - - - 6-122
I. Heave Corrections in the 64-bit HYSWEEP EDITOR - - - - - - -
- 6-1221 Heave Options in the Read Parameters in the 64-bit HYSWEEP
EDITOR- - - - - - 6-1232 Removing Heave Drift in the 64-bit HYSWEEP
EDITOR - - - - - - - - - - - - - 6-1283 Applying True Heave in
POS/MV and F180 Data in the 64-bit HYSWEEP EDITOR 6-131
J. 64-bit HYSWEEP EDITOR Input - - - - - - - - - - - - - - - - -
- 6-1331 Merging Catalog Files in the 64-bit HYSWEEP EDITOR - - - -
- - - - - - - - - 6-1342 Loading Soundings in the 64-bit HYSWEEP
EDITOR - - - - - - - - - - - - - - - 6-135
K. Read Parameters in the 64-bit HYSWEEP EDITOR - - - - - - - -
- 6-1361 Applying One Set of Read Parameters to All Data in the
64-bit HYSWEEP EDITOR 6-1372 Applying Different Parameters to
Select Data Sets in the 64-bit HYSWEEP EDITOR6-1383 Editing Survey
Information in the 64-bit HYSWEEP EDITOR - - - - - - - - - - -
6-1394 Confirming Sufficient Memory Resources- - - - - - - - - - -
- - - - - - - - - - - 6-1405 Entering Matrix and Cloud Section
Settings in the 64-bit HYSWEEP EDITOR - - - 6-1416 TPU Options in
the 64-bit HYSWEEP EDITOR - - - - - - - - - - - - - - - - - -
6-1427 Sonar Processing Options in the 64-bit HYSWEEP EDITOR - - -
- - - - - - - - - 6-1438 Device Offsets in the 64-bit HYSWEEP
EDITOR - - - - - - - - - - - - - - - - - 6-145
L. Overlaying a Channel Plan File - - - - - - - - - - - - - - -
- - - - - 6-149M. Targets in the 64-bit HYSWEEP EDITOR - - - - - -
- - - - - - - - 6-149
1 Displaying a Target File in the 64-bit HYSWEEP EDITOR - - - -
- - - - - - - - 6-1502 Marking Targets in the 64-bit HYSWEEP EDITOR
- - - - - - - - - - - - - - - - 6-1503 Searching on Targets in the
64-bit HYSWEEP EDITOR - - - - - - - - - - - - - - 6-151
N. Points of Interest in the 64-bit HYSWEEP EDITOR - - - - - - -
- - 6-1521 Flagging Points of Interest in the 64-bit HYSWEEP EDITOR
- - - - - - - - - - - 6-1522 Removing Point Flags in the 64-bit
HYSWEEP EDITOR - - - - - - - - - - - - - 6-152xvi
-
Table of Contents3 Golden Soundings in the 64-bit HYSWEEP EDITOR
- - - - - - - - - - - - - - - 6-1534 Searching on Flagged Points or
Golden Soundings in the 64-bit HYSWEEP EDITOR6-156
O. Search and Filter Options in the 64-bit HYSWEEP EDITOR - - -
- - 6-1561 Basic Filters in the 64-bit HYSWEEP EDITOR - - - - - - -
- - - - - - - - - - - 6-1572 GPS Filters in the 64-bit HYSWEEP
EDITOR - - - - - - - - - - - - - - - - - - 6-1583 Sweep Filters in
the 64-bit HYSWEEP EDITOR - - - - - - - - - - - - - - - - - 6-1584
Matrix Filters in the 64-bit HYSWEEP EDITOR - - - - - - - - - - - -
- - - - - 6-1615 Search Only Criteria in the 64-bit HYSWEEP EDITOR
- - - - - - - - - - - - - - 6-162
P. Automatic Processing in the 64-bit HYSWEEP EDITOR - - - - - -
- 6-163Q. Manual Processing in the 64-bit HYSWEEP EDITOR - - - - -
- - - 6-163
1 Editing Tools in the 64-bit HYSWEEP EDITOR - - - - - - - - - -
- - - - - - - 6-1642 Point Editing in the 64-bit HYSWEEP EDITOR- -
- - - - - - - - - - - - - - - - 6-1683 Area-based Editing in the
64-bit HYSWEEP EDITOR - - - - - - - - - - - - - - - 6-1684
Restoring Deleted Soundings in the 64-bit HYSWEEP EDITOR - - - - -
- - - - - 6-170
R. Stage 1 Editing in the 64-bit HYSWEEP EDITOR - - - - - - - -
- - 6-1711 Clipping Track Lines in the 64-bit HYSWEEP EDITOR - - -
- - - - - - - - - - - 6-1722 Removing Position Spikes in the 64-bit
HYSWEEP EDITOR - - - - - - - - - - - 6-1733 Filling Values in the
Heave/Tide Window- - - - - - - - - - - - - - - - - - - - - - 6-1744
Resetting Filled Values in the Heave/Tide Window - - - - - - - - -
- - - - - - - - 6-1745 Recalculating POS/MV Survey Data from POSPac
Raw Data in the 64-bit HYSWEEP ED-
ITOR- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - 6-1756 Recalculating Positioning and RTK Tides from
HYPACK Raw Data in the 64-bit
HYSWEEP EDITOR - - - - - - - - - - - - - - - - - - - - - - - - -
- - 6-1777 Correcting Positioning and RTK Tides Based on GPS PPK
Data - - - - - - - - - - - 6-178
S. Stage 2 Editing in the 64-bit HYSWEEP EDITOR - - - - - - - -
- - 6-1801 Manual Editing in Stage 2 in the 64-bit HYSWEEP EDITOR -
- - - - - - - - - - 6-1812 Checking that your Data Meets Contract
Specifications - - - - - - - - - - - - - - - 6-1823 Tracking your
Editing Progress in the 64-bit HYSWEEP EDITOR - - - - - - - - -
6-1834 Filtering Your Data in the 64-bit HYSWEEP EDITOR - - - - - -
- - - - - - - - 6-1855 CUBE Editing - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - 6-188
T. 64-bit HYSWEEP EDITOR Statistics - - - - - - - - - - - - - -
- - 6-189U. Saving your Edited Data in the 64-bit HYSWEEP EDITOR- -
- - - - 6-190
1 Saving Your Data to a Custom Location in the 64-bit HYSWEEP
EDITOR- - - - - 6-1902 File Save Options in the 64-bit HYSWEEP
EDITOR - - - - - - - - - - - - - - - 6-1913 Saving Data to HS2 and
HS2x Format in the 64-bit HYSWEEP EDITOR- - - - - - 6-1934 Saving
Data to XYZ Format in the 64-bit HYSWEEP EDITOR - - - - - - - - - -
6-1945 Sounding Reduction in XYZ Files in the 64-bit HYSWEEP EDITOR
- - - - - - - 6-1956 Saving to a Matrix in the 64-bit HYSWEEP
EDITOR - - - - - - - - - - - - - - - 6-1967 Exporting Data to
Custom Formats - - - - - - - - - - - - - - - - - - - - - - - - -
6-197
III. Multibeam Quality Control Tests - - - - - - - - - - - - - -
- - - - - -6-199A. Creating your Reference Surface - - - - - - - -
- - - - - - - - - - - 6-199B. Beam Angle Test - - - - - - - - - - -
- - - - - - - - - - - - - - - - 6-200C. SINGLE BEAM TEST - - - - -
- - - - - - - - - - - - - - - - - - - 6-204
IV. CUBE Statistics and Modeling - - - - - - - - - - - - - - - -
- - - - -6-206Last Updated February / 2014 xvii
-
Table of ContentsV. HYSWEEP CUBE - - - - - - - - - - - - - - - -
- - - - - - - - - - 6-207A. Running HYSWEEP CUBE - - - - - - - - -
- - - - - - - - - - - 6-207B. HYSWEEP CUBE Read Parameters - - - -
- - - - - - - - - - - - 6-208C. HYSWEEP CUBE Windows - - - - - - -
- - - - - - - - - - - - - 6-211
1 Grid Window in HYSWEEP CUBE- - - - - - - - - - - - - - - - - -
- - - - - - 6-2112 Node Window in HYSWEEP CUBE - - - - - - - - - -
- - - - - - - - - - - - - 6-2133 Hypothesis Window in HYSWEEP CUBE
- - - - - - - - - - - - - - - - - - - - 6-214
D. View Options in HYSWEEP CUBE - - - - - - - - - - - - - - - -
- 6-2151 Positioning a Light Source Over your Data Model - - - - -
- - - - - - - - - - - - - 6-2152 Other View Options in HYSWEEP
CUBE- - - - - - - - - - - - - - - - - - - - - 6-216
E. Editing your Data with in HYSWEEP CUBE - - - - - - - - - - -
- 6-2161 Editing by User-Selected Hypotheses in HYSWEEP CUBE - - -
- - - - - - - - - 6-2172 Editing Based on Least Uncertainty in
HYSWEEP CUBE - - - - - - - - - - - - - 6-218
F. Saving Data from HYSWEEP CUBE - - - - - - - - - - - - - - - -
6-218G. Exporting HYSWEEP CUBE Images - - - - - - - - - - - - - - -
- 6-219
1 Exporting Georeferenced TIF Files from HYSWEEP CUBE - - - - -
- - - - - - - 6-2192 Exporting your HYSWEEP CUBE Display as a BMP
or TIF Image - - - - - - - - 6-2203 Printing a Screen Capture of
your HYSWEEP CUBE Grid Display - - - - - - - - - 6-220
VI. CUBE Processing in the 64-bit HYSWEEP EDITOR - - - - - - - -
- 6-220A. Uncertainty Calculations in the 64-bit HYSWEEP EDITOR - -
- - - 6-221B. Calculating CUBE Surfaces in the 64-bit HYSWEEP
EDITOR - - - - 6-222C. CUBE Displays in the 64-bit HYSWEEP EDITOR-
- - - - - - - - - 6-223D. Editing Data using CUBE in the 64-bit
HYSWEEP EDITOR - - - - - 6-226
1 Selecting an Alternate CUBE Hypothesis in the 64-bit HYSWEEP
EDITOR - - - - 6-2262 Editing Soundings and Recalculating CUBE in
the 64-bit HYSWEEP EDITOR - - - 6-2283 Marking Golden Soundings in
Your CUBE Surface - - - - - - - - - - - - - - - - - 6-229
E. Saving the CUBE Surface - - - - - - - - - - - - - - - - - - -
- - - 6-230
VII. GEOCODER With Multibeam Snippets - - - - - - - - - - - - -
- - 6-233A. Running GEOCODER with Multibeam Data - - - - - - - - -
- - - 6-234B. Calibration Settings in GEOCODER - - - - - - - - - -
- - - - - - 6-237C. Histogram in GEOCODER- - - - - - - - - - - - -
- - - - - - - - 6-239D. Recalculating the Histogram in GEOCODER - -
- - - - - - - - - - 6-240E. GEOCODER Mosaic Options - - - - - - - -
- - - - - - - - - - - 6-241F. Saving and Loading Projects in
GEOCODER - - - - - - - - - - - - 6-244G. Adjusting your Data for
Multibeam Beam Patterns- - - - - - - - - - - 6-244
1 Extracting the Beam Pattern - - - - - - - - - - - - - - - - -
- - - - - - - - - - - 6-2452 Applying The Beam Pattern - - - - - -
- - - - - - - - - - - - - - - - - - - - - - 6-246
H. Adjusting for Angular Response Analysis in Multibeam Data- -
- - - - 6-247I. Calculating Statistical Information in GEOCODER - -
- - - - - - - 6-250
1 Calculating the GEOCODER Statistics - - - - - - - - - - - - -
- - - - - - - - - 6-2512 Configuring your Statistical Display - - -
- - - - - - - - - - - - - - - - - - - - - 6-251
J. Saving GEOCODER Results - - - - - - - - - - - - - - - - - - -
- 6-2521 Saving the Mosaic as a Georeferenced TIF - - - - - - - - -
- - - - - - - - - - - - 6-252xviii
-
Table of Contents2 Saving the Mosaic to XY, Backscatter Format-
- - - - - - - - - - - - - - - - - - - 6-2543 Saving your ARA Seabed
Data - - - - - - - - - - - - - - - - - - - - - - - - - - -
6-254
VIII.MAPPER - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - -6-257A. Running the Mapper Program - - - - - - - - - - - -
- - - - - - - - - 6-258B. Mapper Options - - - - - - - - - - - - -
- - - - - - - - - - - - - - 6-260
1 Mapper Data Selection Options- - - - - - - - - - - - - - - - -
- - - - - - - - - - 6-2602 Sounding Colors in Mapper - - - - - - -
- - - - - - - - - - - - - - - - - - - - - 6-2613 Mapper Matrix
Setup - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
6-2614 Mapper Matrix Fills - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - 6-2625 Mapper Statistics - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - 6-263
C. Exporting Data from Mapper - - - - - - - - - - - - - - - - -
- - - - 6-263
FINAL PRODUCTS - - - - - - - - - - - - - - - - - - -7-1I. HYPLOT
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
7-1
A. Running HYPLOT - - - - - - - - - - - - - - - - - - - - - - -
- - - - 7-2B. Setting Display Options in HYPLOT - - - - - - - - - -
- - - - - - - - 7-3
1 Border Options in HYPLOT - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - 7-62 Chart Options in HYPLOT - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - -7-103 Grid Options in
HYPLOT - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-7-134 Track Line Options in HYPLOT - - - - - - - - - - - - - - - -
- - - - - - - - - - -7-155 Soundings in HYPLOT - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - -7-166 Matrix Options in
HYPLOT - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-7-197 Planned Line Options in HYPLOT - - - - - - - - - - - - - - -
- - - - - - - - - - -7-208 Target Options in HYPLOT - - - - - - - -
- - - - - - - - - - - - - - - - - - - - -7-219 Title Blocks in
HYPLOT- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-7-2110 Import of Graphics in HYPLOT - - - - - - - - - - - - - - -
- - - - - - - - - - - -7-2411 Text Options in HYPLOT - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - -7-2512 North Arrow
Options in HYPLOT - - - - - - - - - - - - - - - - - - - - - - - - -
-7-2613 Color Bar Options in HYPLOT- - - - - - - - - - - - - - - -
- - - - - - - - - - - -7-2714 Compass Options in HYPLOT - - - - - -
- - - - - - - - - - - - - - - - - - - - - -7-2915 Ruler Options in
HYPLOT - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-7-3016 Plotting Sheet Information in HYPLOT- - - - - - - - - - - -
- - - - - - - - - - - -7-30
C. Creating a Custom Title Block Title Block Editor - - - - - -
- - - - - - 7-311 Editing a Title Block- - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - -7-332 Setting Title Block
Properties - - - - - - - - - - - - - - - - - - - - - - - - - - -
-7-333 Working with Title Block Elements - - - - - - - - - - - - -
- - - - - - - - - - - -7-344 Title Block Editor Display Options - -
- - - - - - - - - - - - - - - - - - - - - - - -7-35
D. Plotting Sheet Templates - - - - - - - - - - - - - - - - - -
- - - - - - 7-35E. Plotting Methods in HYPLOT- - - - - - - - - - -
- - - - - - - - - - - 7-36F. Exporting your Plots to Chart Files -
- - - - - - - - - - - - - - - - - - 7-38
1 Exporting your Plotting Sheet to CAD Formats - - - - - - - - -
- - - - - - - - - - -7-382 Saving your Plot to PDF Format - - - - -
- - - - - - - - - - - - - - - - - - - - - -7-39Last Updated
February / 2014 xix
-
Table of Contents3 Saving Your Plot to a Georeferenced TIF
Graphic - - - - - - - - - - - - - - - - - - 7-40
II. CROSS SECTIONS AND VOLUMES - - - - - - - - - - - - - - - - -
7-42A. Running CROSS SECTIONS AND VOLUMES - - - - - - - - - - - - -
7-42B. Surveys Tab in CROSS SECTIONS AND VOLUMES- - - - - - - - - -
7-43
1 Loading Survey Data in CROSS SECTIONS AND VOLUMES - - - - - -
- - - - - 7-432 Specifying Overdredge and Supergrade Depth in CROSS
SECTIONS AND VOLUMES7-443 Templates in CROSS SECTIONS AND VOLUMES -
- - - - - - - - - - - - - - - 7-454 Objects in CROSS SECTIONS AND
VOLUMES - - - - - - - - - - - - - - - - - - 7-515 Setting Pen
Properties in CROSS SECTIONS AND VOLUMES - - - - - - - - - - -
7-526 Displaying Project Information in CROSS SECTIONS AND VOLUMES
- - - - - - 7-53
C. Graph Options Tab in CROSS SECTIONS AND VOLUMES - - - - - -
7-531 Labeling your Cross Section Graphs - - - - - - - - - - - - -
- - - - - - - - - - - 7-542 Data Display Settings in Cross Section
Graphs - - - - - - - - - - - - - - - - - - - 7-563 Setting Template
Options for Volumes Reports - - - - - - - - - - - - - - - - - - -
7-58
D. View Tab in CROSS SECTIONS AND VOLUMES - - - - - - - - - - -
7-601 Configuring the View Tab Display - - - - - - - - - - - - - -
- - - - - - - - - - - 7-622 Saving an Image of the View Tab
Display- - - - - - - - - - - - - - - - - - - - - - 7-633 Digitizing
XYZ data in CROSS SECTIONS AND VOLUMES- - - - - - - - - - - -
7-63
E. Print Tab in CROSS SECTIONS AND VOLUMES - - - - - - - - - - -
7-64F. Volumes Tab in CROSS SECTIONS AND VOLUMES - - - - - - - - -
7-65G. Cross Section-based Volumes Calculation Methodology - - - -
- - - - - 7-67
1 Average End Area Calculation Methodology - - - - - - - - - - -
- - - - - - - - - 7-672 Standard HYPACK Calculation Methodology - -
- - - - - - - - - - - - - - - - - 7-68
H. Volumes Terminology - - - - - - - - - - - - - - - - - - - - -
- - - - 7-69I. Volumes Calculation Method Comparison in Cross
Sections and Volumes- 7-71
1 Standard HYPACK Volumes Calculation - - - - - - - - - - - - -
- - - - - - - - 7-732 End Area 1 Volumes Calculation - - - - - - -
- - - - - - - - - - - - - - - - - - - 7-753 End Area 2 Volumes
Calculation - - - - - - - - - - - - - - - - - - - - - - - - - -
7-764 End Area 3 Volumes Calculation - - - - - - - - - - - - - - -
- - - - - - - - - - - 7-775 End Area Volumes When Templates Have
Different Numbers of Segments - - - - - - 7-786 Philadelphia
Volumes Calculation in CROSS SECTIONS AND VOLUMES - - - - - 7-817
Beach Volumes - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - 7-858 Volumes with No Template - - - - - - - - - - -
- - - - - - - - - - - - - - - - - 7-909 Volumes by Zone in CROSS
SECTIONS AND VOLUMES - - - - - - - - - - - - - 7-9110 Jacksonville
Volumes Calculation - - - - - - - - - - - - - - - - - - - - - - - -
- 7-9411 Panama City Volumes Calculation - - - - - - - - - - - - -
- - - - - - - - - - - - 7-9712 Savannah Volumes Calculation - - - -
- - - - - - - - - - - - - - - - - - - - - - - 7-9913 Norfolk
Volumes Calculation- - - - - - - - - - - - - - - - - - - - - - - -
- - - - 7-10014 GLDD Volumes - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - 7-10115 Chinese Volumes - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - 7-10416
Kingfisher Volumes - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - 7-111
J. Computing Reach Volumes Using the Channel Plan Feature - - -
- - - 7-1131 Channel Plan Information in Cross Sections and Volumes
- - - - - - - - - - - - - - 7-1132 Example: Using the Channel Plan
Feature in Cross Sections and Volumes - - - - - - 7-114xx
-
Table of ContentsK. Examples in Cross Sections and Volumes - - -
- - - - - - - -