HYDRAULIC WORKOVER SERVICES - Cudd Energy · PDF file• Well Control and Pipe Recovery Services • Concentric Thru-Tubing ... This unit is ideal for thru-tubing ... Cudd Energy Services

HYDRAULIC WORKOVER SERVICES

PROVEN EXPERIENCE. TRUSTED RESULTS.WWW.CUDD.COM

Technology at work for you. Cudd Energy Services (CES) offers a diversified portfolio of solutions for today’s well challenges. From a simple completion job to a complex well intervention operation, CES strives to deliver superior planning, design and execution. Each solution expertly integrates modular components that have a smaller footprint than conventional drilling and workover rigs, to improve job efficiencies, enhance personnel safety and reduce rig-up and rig-down times.

Applications

• Conventional Workovers

• Frac Plug Mill-Out

• Lateral Clean-Out

• Underbalanced Drilling

• Live Well Interventions

• Completion Services

• Dual Completion Installations

• Pipeline Clean-Out Operations

• Storage Well Recompletions

• Well Control and Pipe Recovery Services

• Concentric Thru-Tubing Interventions

• Convey Electric Submersible Pump

QUICK JACK150K|225KThe Quick Jack HWO unit is an economical alternative to high-pressure coiled tubing or a workover rig assist combination.The Quick Jack unit is a fully functional, modular stand alone HWO unit that typically rigs up within six hours. This unit is ideal for thru-tubing and live well tubing completions.

KEY FEATURES:

• Guide system for high-pressure applications

• Automated stabbing system to isolate personnel from overhead loads

• Optional quick stack BOP configuration feature to further reduce rig-up time

Specifications

150KLift capacity (lb) 150,000

Snub capacity (lb) 66,000

Rotary table (ft-lb) 5,000

Pipe size (in) 3⁄4 – 31⁄2

Through bore (in) 71⁄16

Stroke (ft) 10

BOP stack size (in) 71⁄16

Max. surface pressure (psi) 20,000

Horsepower (hp) 350

Bottom flange bore 71⁄16 in, 5M

Flange size 71⁄16 in, 5M



Rotary table (ft-lb) 5,000

Pipe size (in) 3⁄4 – 51⁄2


Stroke (ft) 10

BOP stack size (in) 71⁄16


Horsepower (hp) 350-500

Bottom flange bore 11in, 5M

Flange size 11in, 5M

50KMax. snub capacity (lb) 36,000

Max. load capacityhook load (lb) 50,000

Support (lb) 80,000


Pipe range (in) –


Stroke (ft) 4.5

Min. crew required 2

Pipe winch system Yes

Passive rotary No

BOP interlock system No

Slip interlock system No

Remote operation fromtruck deck Yes

Working rams No

Annular BOP 1

Integrated hanger flange Yes



Support (lb) 200,000


Pipe range (in) 3⁄4 – 51⁄2


Stroke (ft) 8

Min. required work crew 3


Passive rotary Yes

BOP interlock system Yes

Slip interlock system Yes

Remote operation fromtruck deck No

Working rams 2

Annular BOP 1

Integrated hanger flange No



Support (lb) 300,000


Pipe range (in) 3⁄4 – 51⁄2

Through bore (in) 71⁄16*Stroke (ft) 10

Min. required work crew 3


Passive rotary Yes

BOP interlock system Yes

Slip interlock system Yes

Remote operation fromtruck deck No

Working rams 2

Annular BOP 1

Integrated hanger flange No

*11-inch through bore also available

SpecificationsS ifi ti

RIG ASSIST50K|120K|170KAvailable in three lift capacities, the revolutionary hydraulic rig assist units bring all the advantages of hydraulic snubbing to conventional drilling and workover operations in modular, self-contained units. The rig assist units are built on a smaller footprint, ideal for tight oilfield spaces and quick rig-up jobs.

KEY FEATURES:

• Self-contained for easy transport

• Rigups completed in less than 1 hour

• As few as 3 crewmen required

• Handles 3⁄4 to 95⁄8-inch O.D. pipe or casing

• Shortened operating height for better tubular handling and faster trip times

• Stand-alone application available

STAND ALONE150K|225K|340K|600KWith its modular design and lighter load weight, the hydraulic stand alone unit mitigates the challenges that stem from limited space, excess surface pressure and remote, hard-to-reach locations.

KEY FEATURES:

• Self-contained for easy transport

• Through bore up to 133⁄8 inches available

• Handles 3⁄4 to 103⁄4-inch O.D. pipe or casing

• Racking, skidding and Quick Jack features available

Specifications



Torque (lb) 5,000


O.D. pipe and casing (in) 3⁄4 – 31⁄2




Torque (lb) 5,000



Through bore (in) 11



Torque (lb) 22,000



Through bore (in) 11 – 133⁄8



Torque (lb) 15,000




RACK JACK®

VERTICAL PIPE RACKING and SKIDDING SYSTEM225K|340KThe Hydraulic Rack Jack® feature enables crews to vertically “rack” pipe, improving trip times and enhancing safety. When combined with the skidding system, it allows intervention operations to be performed on multiple wells without rigging down or laying down the work string.

KEY FEATURES:

• Suitable for onshore and offshore operations

• Features large work basket to improve personnel safety

• Racking capacity up to 17,500 feet of 31⁄2-inch tubing

• 5,000 to 22,000 ft-lb range of torque capabilities (unit specific)

• 70-foot gin pole with 10,000-pound utility winch available to handle large BHAs

• Heavy duty tong pole to handle large drill pipe and casing tongs

• BOP trolley system capable of lifting up to 40,000 pounds

• 1,000,000-pound skidding system load capacity

• Hydraulic milling clamp is available

Innovative Technology• Ultra-high torque rotary produces up to 22,000 pounds of torque and contains a braking

system that prevents backlash.

• High-capacity gin pole allows handling of BHAs up to 10,000 pounds in a 70-foot section.

• Mud system improves recovery of solids and handling of workover fluids.

• Quick stack tower allows for a safer and easier way to enter and exit the work basket.

• Torque tube allows use of ultra-high torque rotary system when jack is fully extended without transferring excess torque to the jack leg.

• Slip interlock system assures positive weight transfer of tubulars while tripping or snubbing operations are being performed. The interlock system features an electric-over-hydraulic fail-safe that will not allow all slips to be open simultaneously.

Rack Jack® is a registered trademark of Cudd Pressure Control Inc.

HYDRAULIC DRILLING UNIT 340K|460K|600KThe hydraulic drilling unit (HDU) is a configurable system designed for offshore hydraulic workover services and hydraulic drilling operations. An economical alternative to offshore platform and jackup rigs, the HDU increases personnel safety, reduced trip times, and provides easier marine transport.

KEY FEATURES:

• Modular design helps to minimize crane capacity and shipping costs

• Rack Jack® feature allows single or double stand racking of work string

• Modular drilling mud system for fluid control and handling

• Skidding system to provide greater accessibility and reducedependence on crane

• Dual kelly hose system improves connection time when drilling

• Quick stack tower to improve personnel safety while enteringand exiting the work basket

• Hydraulic rotary with 22,000 ft-lb capacity

• 135⁄8-inch maximum through bore

• 10-foot and 12-foot jack stroke option available

• Proprietary torque control system allows full torqueat full jack stroke

• 1,000,000-pound skidding system load capacity

Cudd Energy Services2828 Technology Forest Boulevard

The Woodlands, TX 77381WWW.CUDD.COM

© 2015 Cudd Energy Services. All rights reserved

HYDRAULIC WORKOVER SERVICES - Cudd Energy · PDF file• Well Control and Pipe Recovery Services • Concentric Thru-Tubing ... This unit is ideal for thru-tubing ... Cudd Energy Services

Documents