Hydraulic winches

HY

DR

AU

LI

C W

IN

CH

SY

ST

EM

S

The Mile Marker Hydraulic Winch System has been a self-recovery icon for over a decade. This legendary system utilizes the vehicle’s OEM power steering pump as its power source. Everyday, more than 200 million power steering pumps op-erate flawlessly. Used in all types of vehicles, under every condition, from 50 below to 135 degrees above, the pump must perform for years without service or adjustment. It has to withstand every type of abuse without failure. Having a built-in governor (the pressure relief valve), it is impossible to overload or overwork the pump.

Steering is arguably the most important function while driv-ing, so the power steering pump has evolved into the most reliable system on vehicles today. Mile Marker chose to design a winch to use this continuous reliable power supply over the battery power used by competitors. After rigorous testing, we learned it was the right choice. The Mile Marker Hydraulic Winch can run continuously under load without any battery drain. This Hydraulic Winch System is the choice of the U.S Army, as Mile Marker became the primary self-recovery outfitter for the HMMWV (Hummer) as well as many other tactical ve-hicles around the globe.

The H-Series Hydraulic Winch Line offers the most versatility in mounting and installation options. With a completely independent solenoid control valve and multi-directional motor positions, the H Series is the professional choice for a custom recovery system applica-tion.

The HI-Series Hydraulic Winch comes with the solenoid control valve factory mounted to the winch, allowing for a more efficient instal-lation. This outfit is designed to be installed with a permanent location in mind.

PAGE 6 PAGE 8

SUBMERSIBLE Completely sealed from the elements; vehicle recovery when you would truly need it: covered in mud and water.BUILT TO LAST Ductile Iron Body

(12,000 lb models) and Stainless Steel Fasteners provide unmatched construction for a lifetime of corro-sion-free abuse.

SMOOTH OPERATION Planetary Gear Train is smoothest running self recovery system available.

PAGE 4

PAGE 5

Included in Kit: 12 ft. lead remote control, All hoses and fittings included, Power in and Power out, Remote Solenoid-activated con-trol valve (draws only 2 amps), Adapter for vehicle specific power steering pump. Rated to 7 gpm. Required for H Series Winches.

FEATURES H9000 SPECIFICATIONS H9000FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speed

PERFORMANCE H9000

FEATURES H10500 SPECIFICATIONS H10500

PERFORMANCE H10500

FEATURES H12000 SPECIFICATIONS H12000

PERFORMANCE H12000

3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 6.16 7.48 8.8 10.5Rated pull (lbs.) 9,000 7,300 6,200 5,400Line speed-high gear (FPM) 33.6 38.4 48 57Rated pull (lbs.) 1,500 1,200 1,000 900

Part Number 70-50080CRated line pull (single line)

9,000 lbs.@1500 PSI (4,090 kgs.)

Gear Train Planetary

Gear Ratio 6:1 (low gear)1:1(high gear)

Motor 14 C.I. Hydraulic

Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: Diameter/Length 2.5” (6.4 cm)/9” (23cm)

Total shipping weight 93 lbs. (42.2 kg)

Bolt Pattern 10” x 4.5” (4 bolts, 3/8”)

Part Number 70-50050CRated line pull (single line)

10,500 lbs.@1500 PSI (4,770 kgs.)

Gear Train Planetary

Gear Ratio 6:1 (low gear)1:1(high gear)

Motor 17.9 C.I. Hydraulic

Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: Diameter/Length 2.5” (6.4 cm)/9” (23cm)

Total shipping weight 93 lbs. (42.2 kg)

Bolt Pattern 10” x 4.5” (4 bolts, 3/8”)

HY

DR

AU

LI

C W

IN

CH

SY

ST

EM

SFreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speed

3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 5.65 6.43 7.41 8.58Rated pull (lbs.) 10,500 8,500 7,400 6,400Line speed-high gear (FPM) 31 36 42 48Rated pull (lbs.) 1,600 1,300 1,200 1,000

FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fastenersReversible mounting on 3 sidesDuctile Iron Body2 speed

3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 5.65 6.43 7.41 8.58Rated pull (lbs.) 12,000 9,400 8,200 7,000Line speed-high gear (FPM) 31 36 42 48Rated pull (lbs.) 2,000 1,550 1,350 1,150

H SERIES HYDRAULIC The Mile Marker H Series Hydraulic Winch can be mounted to the front or rear of the vehicle as a permanent or detachable recovery system. This system is independent from its solenoid control pack to give more freedom in mounting options and vehicle application. The installation of one of the H Series models (H9000, H10500, and H12000) requires a vehicle specific 34-Series valve adapter kit (see application chart be-low).

Chevy/GMC 34-5010-15 88+ GM C/K,99+ Tahoe/Suburban, Sil-

verado34-5020-14 72-87 GM C/K, 88-91 RV

series34-5010-12 GM S-series34-5010-13 GM S-series w/4.3L Vortec

Ford34-5010-09 1997+ ford F-150, Expedtion34-5020-07 78-96 Ford full size. 97-98 F250,

F35034-5010-07H 78-98 Ford full size (with

hydroboost)34-5020-06 72-77 Ford full size34-5020-04 83-92 Ford Ranger, 90-94

Explorer34-5020-05 92-96 Ford Ranger, 95-96

Explorer34-5010-34 99-04 Ford 250, 350, 450, 550,

Excursion34-5020-35 2005 and up Ford 250, 350,450, 550,

Excursion34-5020-10 02+ Ford Ranger/Sport Trac

Dodge34-5010-24 Dodge 94+full size34-5020-23 Dodge 72-93 full size34-5010-20 Dodge Dakota 4 cylinder34-5020-22 Dodge Dakota 6 & 8 cylinder

International34-5010-18 Truck & Scout

Jeep34-5010-50 Jeep Cherokee34-5020-51 Jeep CJ, Scrambler34-5020-55 Jeep YJ, TJ & Rubicon

Nissan34-5010-30 Nissan 86-93 except Pathfinder 91-

95, 94-96 truck34-5010-31 91-95 Nissan Pathfinder, 94-

96 truck

Toyota34-5020-41 Toyota All

Land Rover34-5010-45 Land Rover Discovery 94-98

AM Gen.-Hummer34-5010-17 HI (Civilian)34-5010-15 H2

General kit34-5010-01 General kit; does not include PS

pump34-5011-00 Valve only; 24-volt system (No

hose, fittings)Medium Duty Trucks34-5010-80 (International 7400)

Part Number 70-52000CRated line pull (single line)

12,000 lbs.@1500 PSI (5,454 kgs.)

Gear Train Planetary

Gear Ratio 6:1 (low gear)1:1(high gear)

Motor 18.7 C.I. Hydraulic

Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: Diameter/Length 2.5” (6.4 cm)/9” (23cm)

Total shipping weight 98 lbs. (44.5 kg)

Bolt Pattern 10” x 4.5” (4 bolts, 3/8”)PAGE

6PAGE

7

FEATURES HI9000 SPECIFICATIONS HI9000

PERFORMANCE HI9000

ADAPTERS MIGHT DIFFER FROM ITEMS SHOWN

To be used to adapt power steering pump to HI Series Winch System. See Chart for Specific Vehicle Application.

FEATURES HI10500 SPECIFICATIONS HI10500

PERFORMANCE HI10500

FEATURES HI12000 SPECIFICATIONS HI12000

PERFORMANCE HI12000

HI SERIES HYDRAULIC The Mile Marker HI Series Hydraulic Winch was intended for permanent mounting in the front or rear of a vehicle. The solenoid control valve is integrated into the winch body, and therefore always remains in the same location as the winch itself. These systems include all necessary hoses, so-lenoid control valve, remote pendant, roller fairlead with fasteners, and winch cable. To adapt to your vehicle’s power steering pump, the HI Series winches (HI9000, HI10500, and HI12000) re-quire a vehicle specific 35-series vehicle adapter kit (see below).

FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speedpower in & power out

Part Number 75-50085C

Rated line pull 9,000 lbs.@1500 PSI (4,090 kgs.)

Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1(high gear) Motor 14 C.I. HydraulicDirectional Control 12V Solenoid, 3 wayValve Integtrated (max flow 3.5 gpm) 2 ampsControl Pendant 12’ Wired Remote

Hoses5’ & 6.5’: steel braid, high pres-sure, 3k PSI, Uses size 6 JIC swivels on both ends

Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: 2.5” (6.4 cm)/9” (23cm)Total shipping weight 103 lbs. (46.7 kg)Bolt Pattern 10” x 4.5” (4 bolts, 3/8”)

3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 6.16 7.48 8.8 10.5Rated pull (lbs.) 9,000 7,300 6,200 5,400Line speed-high gear (FPM) 33.6 38.4 48 57Rated pull (lbs.) 1,500 1,200 1,000 900

FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speedpower in & power out

3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 5.65 6.43 7.41 8.58Rated pull (lbs.) 10,500 8,500 7,400 6,400Line speed-high gear (FPM) 31 36 42 48Rated pull (lbs.) 1,600 1,300 1,200 1,000

Part Number 75-50050CRated line pull 10,500 lbs.@1500 PSI (4,770 kgs.) Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1(high gear) Motor 17.9 C.I. HydraulicDirectional Control 12V Solenoid, 3 wayValve Integtrated (max flow 3.5 gpm) 2 ampsControl Pendant 12’ Wired Remote

Hoses5’ & 6.5’: steel braid, high pres-sure, 3k PSI, Uses size 6 JIC swivels on both ends

Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: 2.5” (6.4 cm)/9” (23cm)Total shipping weight 103 lbs. (46.7 kg)Bolt Pattern 10” x 4.5” (4 bolts, 3/8”)

HY

DR

AU

LI

C W

IN

CH

SY

ST

EM

S

FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speedpower in & power outReversible MountingDuctile Iron Body

3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 5.65 6.43 7.41 8.58Rated pull (lbs.) 12,000 9,400 8,200 7,000Line speed-high gear (FPM) 31 36 42 48Rated pull (lbs.) 2,000 1,550 1,350 1,150

PART NUMBER: APPLICATION:

35-5020-15GM, Dodge, International,

Chevrolet, H2

35-5020-22 2003 & up Durango

35-5020-07 Ford, up to 1998

35-5020-34Ford 1999 to 04; F-150 1997

to 04

35-5020-10 Ford SportTrac/Ranger

35-5020-51 Jeep

35-5020-31 Nissan

35-5020-41 Toyota

35-5020-45 Land Rover

35-5020-17 AM General–Hummer H1

35-5020-35 2005 and up Ford Super Duty

35-5020-36 2007 Ford F-550 Only

35-5020-81 Chevy 5500

Part Number 75-52000CRated line pull 12,000 lbs.@1500 PSI (5,454 kgs.) Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1(high gear) Motor 18.7 C.I. HydraulicDirectional Control 12V Solenoid, 3 wayValve Integrated (max flow 7 gpm) 2 ampsControl Pendant 12’ Wired Remote

Hoses5’ & 6.5’: steel braid, high pres-sure, 3k PSI, Uses size 6 JIC swivels on both ends

Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: 2.5” (6.4 cm)/9” (23cm)Total shipping weight 110 lbs. (49.9 kg)

Bolt Pattern 10” x 4.5” (4 bolts, 3/8”)

PAGE 8

PAGE 9

EL

EC

TR

IC

WI

NC

H S

YS

TE

MS

FEATURES PEC8•Clockable Clutch •Illuminated Controls •Planetary Gear System•Automatic Load Hold-ing Brake•FRP Sheath Protecting all Cables•Free Spooling•Power In & Power Out•Low Electric Current•Galvanized Roller Fairlead

PERFORMANCE PEC8lbs. kgs. fpm mpm amps@12v0 0 13 3.9 35

2000 907 11 3.3 1004000 1814 9 2.7 1806000 2722 6 1.8 2308000 3629 5 1.5 300

Line Pull Line Speed Motor

Part Number 77-50140Rated line pull 8,000 LBS (3,629 KG) Gear Train 3 Stage PlanetaryGear Ratio 210:1Motor 4.1 HP Perm. Magnet (3 KW) 12V DCControl Pendant Illuminated 2-Button

Dimensions (LxWxH) 21” X 6.22” X 8.25” (533MM X 158 MM X 209.5 MM)

Cable 5/16” x 100’(9,800 nominal)(7.94 MM X 30.5M)

Drum Size: 2.5” (6.4 cm)/9” (23cm)Net weight 80 lbs. (36 kg)Bolt Pattern 10” x 4.5” (254MM X 114MM)

(4 bolts, 3/8”)

SPECIFICATIONS PEC8

FEATURES SEC9.5•Illuminated Controls •Planetary Gear System•Automatic Load Holding Brake•FRP Sheath Protecting all Cables•Free Spooling•Power In and Power Out•Low Electric Current•3/8 in. x 100ft CABLE•Galvanized Roller Fairlead *Heavy Duty Series Wound Motor

PERFORMANCE SEC9.5 Line Pull Line Speed Motor

Part Number 76-50246Rated line pull 9,500 LBS (4,309 KG) Gear Train 3 Stage PlanetaryGear Ratio 212:1Motor 4.8 HP Series Wound(3.6 KW) 12V DCControl Pendant Illuminated 2-Button

Dimensions (LxWxH) 21.6” X 6.6” X 7.91” (548mm X 160 MM X 200 MM)

Cable 3/8” x 100’(14,400 nominal)(9.53 MM X 30.5M)

Drum Size: 2.5” (6.4 cm)/9” (23cm)Net weight 92 lbs. (42 kg)Bolt Pattern 10” x 4.5” (254MM X 114MM)

(4 bolts, 3/8”)

SPECIFICATIONS SEC9.5

FEATURES SEC12

PERFORMANCE SEC12lbs. kgs. fpm mpm amps@12v0 0 23 7 90

2000 907 12.8 3.9 1454000 1814 9.7 2.9 1856000 2722 7.9 2.4 2308000 3629 7.1 2.1 27010000 4536 5.1 1.6 31512000 5443 4.5 1.4 315

Line Pull Line Speed Motor

Part Number 76-50251 Rated line pull 12,000 LBS (5,443 KG) Gear Train 3 Stage PlanetaryGear Ratio 296:1Motor 4.8 HP Series Wound(3.6 KW) 12V DCControl Pendant Illuminated 2-Button

Dimensions (LxWxH) 21.6” X 6.6” X 7.91” (548mm X 160 MM X 200 MM)

Cable 3/8” x 100’(14,400 nominal)(9.53 MM X 30.5M)

Drum Size: 2.5” (6.4 cm)/9” (23cm)Net weight 92 lbs. (42 kg)Bolt Pattern 10” x 4.5” (254MM X 114MM)

(4 bolts, 3/8”)

SPECIFICATIONS SEC12•Illuminated Controls •Planetary Gear System•Automatic Load Holding Brake•FRP Sheath Protecting all Cables•Free Spooling•Power In and Power Out•Low Electric Current•3/8 in. x 100ft CABLE•Galvanized Roller Fairlead *Heavy Duty Series Wound Motor

EVERYTHING YOU NEED, NOTHING YOU DON’TMile Marker’s TOUGH SERIES recovery sys-tems are trail proven winches that have been Tested to the Extreme. Featuring powerful mo-tors, illuminated controls and planetary gear-ing, the TOUGH SERIES winches provide ex-pedition grade recovery and the best consumer value. Available in ranges from 6,000-12,000 pounds, integrated or independent solenoids, and both permanent magnet and series wound varieties, there is certainly a winch ready for you to Abuse World Wide™.

Multi-FunctionIlluminated LED

in IP65 Control Box

lbs. kgs. fpm mpm amps@12v0 0 25.7 7.8 90

2000 907 15.1 4.6 1504000 1814 10.5 3.2 2106000 2722 7.9 2.4 2708000 3629 5.9 1.8 3209500 4309 4.3 1.3 375

PAGE 18

PAGE 19

FEATURES SI9500•Integrated Housing •Illuminated Pendant•Planetary Gear System•Automatic Load Holding Brake•FRP Sheath Protecting all Cables•Free Spooling•Power In and Power Out•Low Electric Current•3/8 in. x 100ft CABLE•Galvanized Roller Fairlead *Heavy Duty Series Wound Motor

PERFORMANCE SI9500 Line Pull Line Speed Motor

Part Number 76-50147Rated line pull 9,500 LBS (4,309 KG) Gear Train 3 Stage PlanetaryGear Ratio 212:1Motor 4.8 HP Series Wound (3.6 KW) 12V DCControl Pendant Illuminated 2-Button

Dimensions (LxWxH) 21.6” X 6.6” X 10” (548mm X 160 MM X 254 MM)

Cable 3/8” x 100’(14,400 nominal)(9.53 MM X 30.5M)

Drum Size: 2.5” (6.4 cm)/9” (23cm)Net weight 93 lbs. (42 kg)Bolt Pattern 10” x 4.5” (254MM X 114MM)

(4 bolts, 3/8”)

SPECIFICATIONS SI9500

FEATURES SI12000

PERFORMANCE SI12000lbs. kgs. fpm mpm amps@12v0 0 23 7 90

2000 907 12.8 3.9 1454000 1814 9.7 2.9 1856000 2722 7.9 2.4 2308000 3629 7.1 2.1 27010000 4536 5.1 1.6 31512000 5443 4.5 1.4 315

Line Pull Line Speed Motor

Part Number 76-50152Rated line pull 12,000 LBS (5,443 KG) Gear Train 3 Stage PlanetaryGear Ratio 296:1Motor 4.8 HP Series Wound(3.6 KW) 12V DCControl Pendant Illuminated 2-Button

Dimensions (LxWxH) 21.6” X 6.6” X 10” (548mm X 160 MM X 254 MM)

Cable 3/8” x 100’(14,400 nominal)(9.53 MM X 30.5M)

Drum Size: 2.5” (6.4 cm)/9” (23cm)Net weight 93 lbs. (42 kg)Bolt Pattern 10” x 4.5” (254MM X 114MM)

(4 bolts, 3/8”)

SPECIFICATIONS SI12000

EVERYTHING YOU NEED, NOTHING YOU DON’TMile Marker’s TOUGH SERIES recovery sys-tems are trail proven winches that have been Tested to the Extreme. Featuring powerful mo-tors, illuminated controls and planetary gear-ing, the TOUGH SERIES winches provide ex-pedition grade recovery and the best consumer value. Available in ranges from 6,000-12,000 pounds, integrated or independent solenoids, and both permanent magnet and series wound varieties, there is certainly a winch ready for you to Abuse World Wide™.

•Integrated Housing •Illuminated Pendant•Planetary Gear System•Automatic Load Holding Brake•FRP Sheath Protecting all Cables•Free Spooling•Power In and Power Out•Low Electric Current•3/8 in. x 100ft CABLE•Galvanized Roller Fairlead *Heavy Duty Series Wound Motor

lbs. kgs. fpm mpm amps@12v0 0 25.7 7.8 90

2000 907 15.1 4.6 1504000 1814 10.5 3.2 2106000 2722 7.9 2.4 2708000 3629 5.9 1.8 3209500 4309 4.3 1.3 375

EL

EC

TR

IC

WI

NC

H S

YS

TE

MS

INTEGRATED SOLENOID WINCHES

PAGE 20

PAGE 21

EVERYTHING YOU NEED, NOTHING YOU DON’TMile Marker’s TOUGH SERIES recovery sys-tems are trail proven winches that have been Tested to the Extreme. Featuring powerful mo-tors, illuminated controls and planetary gear-ing, the TOUGH SERIES winches provide ex-pedition grade recovery and the best consumer value. Available in ranges from 6,000-12,000 pounds, integrated or independent solenoids, and both permanent magnet and series wound varieties, there is certainly a winch ready for you to Abuse World Wide™.

Multi-FunctionIlluminated LED

in IP65 Control Box

FEATURES PE6000•Illuminated Controls •Planetary Gear System•Automatic Load Hold-ing Brake•FRP Sheath Protecting all Cables•Free Spooling•Power In & Power Out•Low Electric Current•Galvanized Roller Fairlead

PERFORMANCE PE6000lbs. kgs. fpm mpm amps@12v0 0 15 4.6 35

1000 454 11 3.3 803000 1361 8 2.5 1005000 2268 5 1.5 1456000 2722 4.6 1.4 170

Line Pull Line Speed Motor

Part Number 76-50230Rated line pull 6,000 LBS (2,722 KG) Gear Train 3 Stage PlanetaryGear Ratio 210:1Motor 3.6 HP Perm. Magnet (2.7 KW) 12V DCControl Pendant Illuminated 2-Button

Dimensions (LxWxH) 17.24” X 6.22” X 7.28” (438MM X 158 MM X 185 MM)

Cable 5/16” x 85’(9,800 nominal)(7.94 MM X 26.06M)

Drum Size: 2.5” (6.4 cm)/5.5” (140 Cm)

Net weight 68 lbs. (31 kg)Bolt Pattern 6.535” x 4.5” (166MM X

114MM)

SPECIFICATIONS PE6000

FEATURES PE8000•Illuminated Controls •Planetary Gear System•Automatic Load Hold-ing Brake•FRP Sheath Protecting all Cables•Free Spooling•Power In & Power Out•Low Electric Current•Galvanized Roller Fairlead

PERFORMANCE PE8000lbs. kgs. fpm mpm amps@12v0 0 13 3.9 35

2000 907 11 3.3 1004500 2041 9 2.7 1806000 2722 6 1.8 2308000 3629 5 1.5 300

Line Pull Line Speed Motor

Part Number 76-50240Rated line pull 8,000 LBS (3,629 KG) Gear Train 3 Stage PlanetaryGear Ratio 210:1Motor 4 HP Perm. Magnet (3 KW) 12V DCControl Pendant Illuminated 2-Button

Dimensions (LxWxH) 21” X 6.22” X 8.25” (533MM X 158 MM X 209.5 MM)

Cable 5/16” x 100’(9,800 nominal)(7.94 MM X 30.5M)

Drum Size: 2.5” (6.4 cm)/9” (23cm)Net weight 80 lbs. (36 kg)Bolt Pattern 10” x 4.5” (254MM X 114MM)

(4 bolts, 3/8”)

SPECIFICATIONS PE8000

FEATURES E9000•Illuminated Controls •Planetary Gear System•Automatic Load Hold-ing Brake•FRP Sheath Protecting all Cables•Free Spooling•Power In & Power Out•Low Electric Current•Galvanized Roller Fairlead

PERFORMANCE E9000lbs. kgs. fpm mpm amps@12v0 0 15 4.6 33

3000 907 11.2 3.4 1206000 1814 8.1 2.5 2109000 2722 5 1.5 305

Line Pull Line Speed Motor

SPECIFICATIONS E9000Part Number 76-50042Rated line pull 9,000 LBS (4,090 KG) Gear Train 3 Stage PlanetaryGear Ratio 210:1Motor 4.4 HP Perm. Magnet (3.35 KW) 12V DCControl Pendant Illuminated 2-Button

Dimensions (LxWxH) 21.45” X 6” X 6.38” (544MM X 152 MM X 162 MM)

Cable 3/8” x 100’(14,400 nominal)(9.53 MM X 30.5M)

Drum Size: 2.5” (6.4 cm)/9” (23cm)Net weight 84 lbs. (38.1 kg)Bolt Pattern 10” x 4.5” (254MM X

114MM)(4 bolts, 3/8”)

EL

EC

TR

IC

WI

NC

H S

YS

TE

MS

PAGE 22

PAGE 23

AT

V

WI

NC

HI

NG

S

YS

TE

MS

EVERYTHING YOU NEED, NOTHING YOU DON’TMile Marker’s TOUGH SERIES recovery sys-tems are trail proven winches that have been Tested to the Extreme. The PE models are a compact, battle-proven resource for your trail conquering ATV. These winches feature the no compromise, all metal construction of all other models, without the innovative control of MiFi Technology™. The TOUGH SERIES, PE winches will get down to work, and get you through your path.

FEATURES PE2500•Illuminated Controls •Planetary Gear System•Dynamic Brake•Free Spooling•Power In & Power Out•Low Electric Current•Heavy Duty Permanent Magnet Motor•Includes both Handle bar Switch and 12’ Wired PendantPERFORMANCE PE2500

Line Pull Line Speed Motor

Part Number 76-50105Rated line pull 2500 lbs. (1134 kg) Gear Train PlanetaryGear Ratio 153:1Motor .9 hp Perm Magnet (.7kw ), 12 volt

Control Pendant Illuminated 2-Button & Handlebar switch

Dimensions (LxWxH) 13” x 5” x 5” (330mm x 127mm x 127mm)

Cable 3/16” x 50’(4200 nominal)(4.76 MM X 15.2 M)

Drum Size: 2” (50 mm) x 2.95” (75 mm)

Net weight 24 lbs. (11.8 kg)Bolt Pattern 3” x 4.87”

(76.2 mm x 124 mm)

SPECIFICATIONS PE2500

FEATURES PE3000•Illuminated Controls •Planetary Gear System•Dynamic Brake•Free Spooling•Power In & Power Out•Low Electric Current•Heavy Duty Permanent Magnet Motor

PERFORMANCE PE3000 Line Pull Line Speed Motor

Part Number 76-50110Rated line pull 3,000 lbs. (1362 kg) Gear Train PlanetaryGear Ratio 153:1Motor 1.8 HP Perm. magnet (1.3 kw), 12V

Control Pendant Illuminated 2-Button

Dimensions (LxWxH) 12.9” x 4.22” x 4.3” (330.2mm x 107mm x 112.5mm)

Cable 3/16” x 50’(4200 nominal)(4.76 MM X 15.2 M)

Drum Size: 1.5 (38mm) x 3.2” (82mm)Net weight 21 lb (9.6 kg)Bolt Pattern 3 Bolt, 1.9” x 3.07”

(48 mm x 78 mm)

SPECIFICATIONS PE3000

lbs. kgs. fpm mpm amps@12v0 0 19.1 5.8 12500 227 15.3 4.7 311000 454 12.8 3.9 621500 680 9 2.7 902000 907 6.4 2 1142500 1134 4.5 1.4 154

lbs. kgs. fpm mpm amps@12v0 0 10 3 15800 363 8 2.4 501500 680 7.2 2.2 802200 1000 6.6 2.0 1103000 1362 4.6 1.4 145

FEATURES PE3500•Illuminated Controls •Planetary Gear System•Dynamic Brake•Free Spooling•Power In & Power Out•Low Electric Current•Heavy Duty Permanent Magnet Motor

PERFORMANCE PE3500 Line Pull Line Speed Motor

SPECIFICATIONS PE3500

lbs. kgs. fpm mpm amps@12v0 0 12 3.7 15

1000 454 9.2 2.8 402000 908 7.5 2.3 803000 1362 5 1.5 1203500 1589 4 1.2 140

Part Number 76-50112Rated line pull 3,500 lbs. (1589 kg)Gear Train PlanetaryGear Ratio 262:1Motor 2 HP Perm. Magnet (1.5kw), 12 volt

Control Pendant Illuminated 2-Button

Dimensions (LxWxH) 13.4” x 4.22” x 4.3” (340.2mm x 107mm x 112.5mm)

Cable 7/32” x 45’(5600 nominal)(5.45 MM X 13.7 M)

Drum Size: 1.5 (38mm) x 3.2” (82mm)Net weight 23 lb (10.6 kg)Bolt Pattern 1.9” x 3.07”

(48 mm x 78 mm)PAGE 30

PAGE 31

EVERYTHING YOU NEED, NOTHING YOU DON’TMile Marker’s TOUGH SERIES recovery sys-tems have you covered from the trail, to the trailer, and from the clay to the construction site. These utility winches have infinite uses, and you can count on them to get the job done over and over again.

Utility Winches

FEATURES PE2000•Illuminated Controls •Planetary Gear System•Dynamic Brake•Free Spooling•Power In & Power Out•Low Electric Current•Heavy Duty Permanent Magnet Motor•Includes both Handle bar Switch and 12’ Wired PendantPERFORMANCE PE2000

Line Pull Line Speed Motor

Part Number 76-50100Rated line pull 2,000 lbs. (907 kg) Gear Train PlanetaryGear Ratio 153:1Motor 1.5 hp Perm Magnet (1kw) 12V

Control Pendant 2-Button

Dimensions (LxWxH)12.2” x 4.13” x 4.35” (309mm x 105mm x 111mm)

Cable 5/32” x 50’ (4200 nominal)(4 MM X 15.2 M)

Drum Size: 2.56”(65 mm) x 2.86” (72.6 mm)

Net weight 15 lb (6.6 kg)Bolt Pattern T-Shaped 3” (76.2mm) x

1.9” (48.3mm)

SPECIFICATIONS PE2000

lbs. kgs. fpm mpm amps@12v0 0 14 4.3 14

1000 454 9 2.7 601500 680 7.5 2.3 902000 907 5.9 1.8 115

FEATURES PE4500•Illuminated Controls •Planetary Gear System•Dynamic Brake•Free Spooling•Power In & Power Out•Low Electric Current•Heavy Duty Permanent Magnet Motor

PERFORMANCE PE4500 Line Pull Line Speed Motor

SPECIFICATIONS PE4500

lbs. kgs. fpm mpm amps@12v0 0 14 4.3 35

1500 680 6.6 2 802200 998 5.2 1.6 1003000 1361 4.6 1.4 1454500 2041 3.3 1 170

Part Number 76-50115Rated line pull 4,500 lbs. (2,043 kg)Gear Train PlanetaryGear Ratio 294:1Motor 1.9 HP Perm. Magnet(1.4kw), 12 volt

Control Pendant Illuminated 2-Button

Dimensions (LxWxH) 17.16” x 6.2” x 7.3” (436mm x 152mm x 185mm)

Cable 1/4” x 85’(7000 lbs. nomi-nal)(5.45 MM X 13.7 M)

Drum Size: 2.5 (63mm) x 5.5” (140mm)Net weight 51 lb (23 kg)Bolt Pattern 6.535” x 4.5”

(166 mm x 114.3 mm)

AT

V

WI

NC

HI

NG

S

YS

TE

MS

PAGE 32

PAGE 33