HYDRAULIC DRILLING RIG · HYDRAULIC DRILLING RIG In 1990 Soilmec was awarded the certification of its own Quality System to ISO 9001/UNI 29001 series standards. CERTIFIED QUALITY

SM-401HYDRAULIC DRILLING RIG

In 1990 Soilmec was awarded the certification of its own

Quality System to ISO 9001/UNI 29001 series standards.

CERTIFIED QUALITY SYSTEM

G r o u n d E n g i n e e r i n g E q u i p m e n tG r o u n d E n g i n e e r i n g E q u i p m e n t

SOILMEC distributes machinery and structures all overthe world, supported by SOILMEC subsidiary companiesand representative offices as:

SOILMEC LTD - U.K.SOILMEC MISR S.A.E. Co. - EgyptSOILMEC (H.K.) Limited - Hong KongSOILMEC JAPAN CO LTD - JapanSOILMEC MALAYSIA - MalaysiaSOILMEC S.P.A. - Beijing Repr. Office - P.R. ChinaSOILMEC FAR EAST PTE.LTD - SingaporeSOILMEC EMIRATES - U.A.E.SOILMEC GULF - U.A.E.

SOILMEC S.p.A.Drilling and Foundation Equipment5819, via Dismano47023 Cesena (FC) - Italytel. +39-0547-319111fax +39-0547-318548http:// www.soilmec.ite-mail: [email protected]

1 - Crawler undercarriage with +/- 10°oscillating tracks.

2 - Machine body including prime mover,hydraulic plant with load SENSINGcontrol and soundproof canopy.

3 - N° 2 hydraulic outriggers.

4 - Control levers for rig positioning.

5 - Articulated boom for mast positionning.

6 - 4 x 90° turntable for mast rotation.

7 - 1000 mm stroke cylinder for mastshoring.

8 - Rotary cradle with adjusting rollers and400 mm side-shifting device.

9 - Variable speed rotary head with 1400daNm max torque, 238 rpm maxrotation.

10 - Floating system with standard rotaryhead.

11 - Clamp max. diam. 415 mm.

12 - Breaker max. diam. 415 mm.

13 - Control board on rotating arm fordrilling and service functions.

14 - Service winch with jib.

15 - Guiding and lay-out device forhydraulic hoses.

1 2 3

OPTIONALS

1 - Variable Speed RotaryHeads.

2 - Double Head.

3 - Top hammer.

4 - Flushing Pump.

5 - Rod carousel for 6 or 2rods depending on rigconfigurations.

6 - Lifting Crane.

7 - 90° mast articulationfor tie back.

413

4 5 6 7

HYDRAULIC DRILLING RIG

A new model

SM-401

Transport Condition

98

56

316

67

16

35

63

73

2

17

13

1122 2998 2130367

23

66

4002300

26

81

2312

9915

2998 2130

19

50

0

1122

20

39

2998 2130

17

13

30

00

MAX.ø 90

1491

20

89

20

1063 2997 2130

594

1028

65

00

ST

RO

KE

40

00

ST

RO

KE

30

00

ST

RO

KE15

00

-20

00

ST

RO

KE

Ø225

653

HR 70V

Soilmec SM-401 is a multipurpose drilling rig. Its modular design is engineered for the execution of:Micropiles, Tie-backs, Jet-Grouting, Coring, Drain, Water wells.The rig is fitted with proportional, hydraulic servo-assisted controls that make the operations smooth and troublefree even in the hardest weather conditions. Featured with Load Sensing System, it has lower running costs anda reduced wear and tear on components.Soilmec SM-401 versatility is perfectly shown by the availability of a wide range of rotary heads designed toperform all known drilling technologies and to comply with the most stringent project requirements and to copewith all the geological conditions:Variable speed rotary headAny combination of torque and speed can be set from operator’s console to get the most suited ratio for yourdrilling technology. Standard rotary may be easily modified on site, by fitting purposely-designed kits, to geteither higher torque or higher speed versions.Rotary head with Rollstar gear boxIt provides a maximum torque of 1500 daNm and a maximum speed of 461 rpm.RotopIt combines Soilmec main reduction gear with one commercial brand hammering device.Hydraulic Top HammerThe rig design allows the assembling of any available top hammer brand with a maximum frequency of 2400blow/minute and a maximum energy of 840 Nm.Double head.Hydraulic system is sized to feed any options such as Rotary/Rotary, Rotary/Rotop and Rotary/Top Hammerwithout compromising in power.Soilmec SM-401 may be further tailored with a wide range of optional items such as:- Jet-Grouting kit for mono, bi or three fluids treatment and steeples lifting speed:- 90° mast articulation for tie-back drilling;- Mast rotation by motoreducer for +_ 180°;- Mast for 1.5, 3, 4 and 6.5 m stroke;- Service crane for handling of drilling rods;- Foam Pump;- Dust collector;- Radio operated remote control.

1633

73

2

45°

60-2251593830

60-3151594980

Jack4000894528

Technical DataUNDERCARRIAGE WITH OSCILLATING TRACKSTrack shoe widthOverall lengthOverall widthTravelling speedAverage ground pressureDIESEL ENGINEMake and modelMax Diesel Engine power (SAE J1995)Fuel tank capacityELECTRIC MOTOR (on request)Make and modelRated powerHYDRAULIC SYSTEMHydraulic oil tank capacityROTARY HEADSGear box typeMax. nominal torqueMaximum drilling speedMAST HOIST & FEED SYSTEMFeed TypeFeed strokeMaximum hoist pullMaximum feed forceMaximum speed (fast operation)CLAMP & HYDRAULIC JOINT BREAKERNominal sizeMaximum clamping force (28 MPa)Maximum breaking torqueWINCH and JIBMaximum line pull (1st layer)Maximum rope speed (4st or 5st layer)Rope diameterRope capacity / Rope fittedNOISE LEVELWEIGHT

mmmmmmkm/hMPa

kW (BHp)liter

kW (BHp)

liter

daNm@rpmrpm

mmkNkN

m/min

mmkN

daNm

kNm/minmmm

LwA-LpAkg

400299823002,70,06

CUMMINS QSB 5.9-30-T Tier II119 (160) @ 200 rpm

200

SIEMENS 4 POLS 50Kz90 (121) @ 1485 rpm

400

255710

52/40105 - 81

13400 13400

Gear motor6500604030

HR 70 VVariable

1400238

HT 70 G3 speeds

2000200

HS 60 VVariable

230915

HR 60G3 speeds

1500461

50-3152665060

50-3602665060

60-4152665060

Mast movements

SM-401STANDARD VERSION

SM-401JET GROUTING VERSION

SM-401MULTIPURPOSE SYSTEM

16

30°

1806

39

46

21°

26

49

2731

9915

HT 70G

HR 60G

SM-401HYDRAULIC DRILLING RIG

In 1990 Soilmec was awarded the certification of its own

Quality System to ISO 9001/UNI 29001 series standards.

CERTIFIED QUALITY SYSTEM

G r o u n d E n g i n e e r i n g E q u i p m e n tG r o u n d E n g i n e e r i n g E q u i p m e n t

SOILMEC distributes machinery and structures all overthe world, supported by SOILMEC subsidiary companiesand representative offices as:

SOILMEC LTD - U.K.SOILMEC MISR S.A.E. Co. - EgyptSOILMEC (H.K.) Limited - Hong KongSOILMEC JAPAN CO LTD - JapanSOILMEC MALAYSIA - MalaysiaSOILMEC S.P.A. - Beijing Repr. Office - P.R. ChinaSOILMEC FAR EAST PTE.LTD - SingaporeSOILMEC EMIRATES - U.A.E.SOILMEC GULF - U.A.E.

SOILMEC S.p.A.Drilling and Foundation Equipment5819, via Dismano47023 Cesena (FC) - Italytel. +39-0547-319111fax +39-0547-318548http:// www.soilmec.ite-mail: [email protected]

1 - Crawler undercarriage with +/- 10°oscillating tracks.

2 - Machine body including prime mover,hydraulic plant with load SENSINGcontrol and soundproof canopy.

3 - N° 2 hydraulic outriggers.

4 - Control levers for rig positioning.

5 - Articulated boom for mast positionning.

6 - 4 x 90° turntable for mast rotation.

7 - 1000 mm stroke cylinder for mastshoring.

8 - Rotary cradle with adjusting rollers and400 mm side-shifting device.

9 - Variable speed rotary head with 1400daNm max torque, 238 rpm maxrotation.

10 - Floating system with standard rotaryhead.

11 - Clamp max. diam. 415 mm.

12 - Breaker max. diam. 415 mm.

13 - Control board on rotating arm fordrilling and service functions.

14 - Service winch with jib.

15 - Guiding and lay-out device forhydraulic hoses.

1 2 3

OPTIONALS

1 - Variable Speed RotaryHeads.

2 - Double Head.

3 - Top hammer.

4 - Flushing Pump.

5 - Rod carousel for 6 or 2rods depending on rigconfigurations.

6 - Lifting Crane.

7 - 90° mast articulationfor tie back.

413

4 5 6 7

SM-401HYDRAULIC DRILLING RIG

In 1990 Soilmec was awarded the certification of its own

Quality System to ISO 9001/UNI 29001 series standards.

CERTIFIED QUALITY SYSTEM

G r o u n d E n g i n e e r i n g E q u i p m e n tG r o u n d E n g i n e e r i n g E q u i p m e n t

SOILMEC distributes machinery and structures all overthe world, supported by SOILMEC subsidiary companiesand representative offices as:

SOILMEC LTD - U.K.SOILMEC MISR S.A.E. Co. - EgyptSOILMEC (H.K.) Limited - Hong KongSOILMEC JAPAN CO LTD - JapanSOILMEC MALAYSIA - MalaysiaSOILMEC S.P.A. - Beijing Repr. Office - P.R. ChinaSOILMEC FAR EAST PTE.LTD - SingaporeSOILMEC EMIRATES - U.A.E.SOILMEC GULF - U.A.E.

SOILMEC S.p.A.Drilling and Foundation Equipment5819, via Dismano47023 Cesena (FC) - Italytel. +39-0547-319111fax +39-0547-318548http:// www.soilmec.ite-mail: [email protected]

1 - Crawler undercarriage with +/- 10°oscillating tracks.

2 - Machine body including prime mover,hydraulic plant with load SENSINGcontrol and soundproof canopy.

3 - N° 2 hydraulic outriggers.

4 - Control levers for rig positioning.

5 - Articulated boom for mast positionning.

6 - 4 x 90° turntable for mast rotation.

7 - 1000 mm stroke cylinder for mastshoring.

8 - Rotary cradle with adjusting rollers and400 mm side-shifting device.

9 - Variable speed rotary head with 1400daNm max torque, 238 rpm maxrotation.

10 - Floating system with standard rotaryhead.

11 - Clamp max. diam. 415 mm.

12 - Breaker max. diam. 415 mm.

13 - Control board on rotating arm fordrilling and service functions.

14 - Service winch with jib.

15 - Guiding and lay-out device forhydraulic hoses.

1 2 3

OPTIONALS

1 - Variable Speed RotaryHeads.

2 - Double Head.

3 - Top hammer.

4 - Flushing Pump.

5 - Rod carousel for 6 or 2rods depending on rigconfigurations.

6 - Lifting Crane.

7 - 90° mast articulationfor tie back.

413

4 5 6 7

HYDRAULIC DRILLING RIG

A new model

SM-401

Transport Condition

98

56

316

67

16

35

63

73

2

17

13

1122 2998 2130367

23

66

4002300

26

81

2312

9915

2998 2130

19

50

0

1122

20

39

2998 2130

17

13

30

00

MAX.ø 90

1491

20

89

20

1063 2997 2130

594

1028

65

00

ST

RO

KE

40

00

ST

RO

KE

30

00

ST

RO

KE15

00

-20

00

ST

RO

KE

Ø225

653

HR 70V

Soilmec SM-401 is a multipurpose drilling rig. Its modular design is engineered for the execution of:Micropiles, Tie-backs, Jet-Grouting, Coring, Drain, Water wells.The rig is fitted with proportional, hydraulic servo-assisted controls that make the operations smooth and troublefree even in the hardest weather conditions. Featured with Load Sensing System, it has lower running costs anda reduced wear and tear on components.Soilmec SM-401 versatility is perfectly shown by the availability of a wide range of rotary heads designed toperform all known drilling technologies and to comply with the most stringent project requirements and to copewith all the geological conditions:Variable speed rotary headAny combination of torque and speed can be set from operator’s console to get the most suited ratio for yourdrilling technology. Standard rotary may be easily modified on site, by fitting purposely-designed kits, to geteither higher torque or higher speed versions.Rotary head with Rollstar gear boxIt provides a maximum torque of 1500 daNm and a maximum speed of 461 rpm.RotopIt combines Soilmec main reduction gear with one commercial brand hammering device.Hydraulic Top HammerThe rig design allows the assembling of any available top hammer brand with a maximum frequency of 2400blow/minute and a maximum energy of 840 Nm.Double head.Hydraulic system is sized to feed any options such as Rotary/Rotary, Rotary/Rotop and Rotary/Top Hammerwithout compromising in power.Soilmec SM-401 may be further tailored with a wide range of optional items such as:- Jet-Grouting kit for mono, bi or three fluids treatment and steeples lifting speed:- 90° mast articulation for tie-back drilling;- Mast rotation by motoreducer for +_ 180°;- Mast for 1.5, 3, 4 and 6.5 m stroke;- Service crane for handling of drilling rods;- Foam Pump;- Dust collector;- Radio operated remote control.

16337

32

45°

60-2251593830

60-3151594980

Jack4000894528

Technical DataUNDERCARRIAGE WITH OSCILLATING TRACKSTrack shoe widthOverall lengthOverall widthTravelling speedAverage ground pressureDIESEL ENGINEMake and modelMax Diesel Engine power (SAE J1995)Fuel tank capacityELECTRIC MOTOR (on request)Make and modelRated powerHYDRAULIC SYSTEMHydraulic oil tank capacityROTARY HEADSGear box typeMax. nominal torqueMaximum drilling speedMAST HOIST & FEED SYSTEMFeed TypeFeed strokeMaximum hoist pullMaximum feed forceMaximum speed (fast operation)CLAMP & HYDRAULIC JOINT BREAKERNominal sizeMaximum clamping force (28 MPa)Maximum breaking torqueWINCH and JIBMaximum line pull (1st layer)Maximum rope speed (4st or 5st layer)Rope diameterRope capacity / Rope fittedNOISE LEVELWEIGHT

mmmmmmkm/hMPa

kW (BHp)liter

kW (BHp)

liter

daNm@rpmrpm

mmkNkN

m/min

mmkN

daNm

kNm/minmmm

LwA-LpAkg

400299823002,70,06

CUMMINS QSB 5.9-30-T Tier II119 (160) @ 200 rpm

200

SIEMENS 4 POLS 50Kz90 (121) @ 1485 rpm

400

255710

52/40105 - 81

13400 13400

Gear motor6500604030

HR 70 VVariable

1400238

HT 70 G3 speeds

2000200

HS 60 VVariable

230915

HR 60G3 speeds

1500461

50-3152665060

50-3602665060

60-4152665060

Mast movements

SM-401STANDARD VERSION

SM-401JET GROUTING VERSION

SM-401MULTIPURPOSE SYSTEM

16

30°

1806

39

46

21°

26

49

2731

9915

HT 70G

HR 60G

HYDRAULIC DRILLING RIG

A new model

SM-401

Transport Condition

98

56

316

67

16

35

63

73

2

17

13

1122 2998 2130367

23

66

4002300

26

81

2312

9915

2998 2130

19

50

0

1122

20

39

2998 2130

17

13

30

00

MAX.ø 90

1491

20

89

20

1063 2997 2130

594

1028

65

00

ST

RO

KE

40

00

ST

RO

KE

30

00

ST

RO

KE15

00

-20

00

ST

RO

KE

Ø225

653

HR 70V

Soilmec SM-401 is a multipurpose drilling rig. Its modular design is engineered for the execution of:Micropiles, Tie-backs, Jet-Grouting, Coring, Drain, Water wells.The rig is fitted with proportional, hydraulic servo-assisted controls that make the operations smooth and troublefree even in the hardest weather conditions. Featured with Load Sensing System, it has lower running costs anda reduced wear and tear on components.Soilmec SM-401 versatility is perfectly shown by the availability of a wide range of rotary heads designed toperform all known drilling technologies and to comply with the most stringent project requirements and to copewith all the geological conditions:Variable speed rotary headAny combination of torque and speed can be set from operator’s console to get the most suited ratio for yourdrilling technology. Standard rotary may be easily modified on site, by fitting purposely-designed kits, to geteither higher torque or higher speed versions.Rotary head with Rollstar gear boxIt provides a maximum torque of 1500 daNm and a maximum speed of 461 rpm.RotopIt combines Soilmec main reduction gear with one commercial brand hammering device.Hydraulic Top HammerThe rig design allows the assembling of any available top hammer brand with a maximum frequency of 2400blow/minute and a maximum energy of 840 Nm.Double head.Hydraulic system is sized to feed any options such as Rotary/Rotary, Rotary/Rotop and Rotary/Top Hammerwithout compromising in power.Soilmec SM-401 may be further tailored with a wide range of optional items such as:- Jet-Grouting kit for mono, bi or three fluids treatment and steeples lifting speed:- 90° mast articulation for tie-back drilling;- Mast rotation by motoreducer for +_ 180°;- Mast for 1.5, 3, 4 and 6.5 m stroke;- Service crane for handling of drilling rods;- Foam Pump;- Dust collector;- Radio operated remote control.

1633

73

2

45°

60-2251593830

60-3151594980

Jack4000894528

Technical DataUNDERCARRIAGE WITH OSCILLATING TRACKSTrack shoe widthOverall lengthOverall widthTravelling speedAverage ground pressureDIESEL ENGINEMake and modelMax Diesel Engine power (SAE J1995)Fuel tank capacityELECTRIC MOTOR (on request)Make and modelRated powerHYDRAULIC SYSTEMHydraulic oil tank capacityROTARY HEADSGear box typeMax. nominal torqueMaximum drilling speedMAST HOIST & FEED SYSTEMFeed TypeFeed strokeMaximum hoist pullMaximum feed forceMaximum speed (fast operation)CLAMP & HYDRAULIC JOINT BREAKERNominal sizeMaximum clamping force (28 MPa)Maximum breaking torqueWINCH and JIBMaximum line pull (1st layer)Maximum rope speed (4st or 5st layer)Rope diameterRope capacity / Rope fittedNOISE LEVELWEIGHT

mmmmmmkm/hMPa

kW (BHp)liter

kW (BHp)

liter

daNm@rpmrpm

mmkNkN

m/min

mmkN

daNm

kNm/minmmm

LwA-LpAkg

400299823002,70,06

CUMMINS QSB 5.9-30-T Tier II119 (160) @ 200 rpm

200

SIEMENS 4 POLS 50Kz90 (121) @ 1485 rpm

400

255710

52/40105 - 81

13400 13400

Gear motor6500604030

HR 70 VVariable

1400238

HT 70 G3 speeds

2000200

HS 60 VVariable

230915

HR 60G3 speeds

1500461

50-3152665060

50-3602665060

60-4152665060

Mast movements

SM-401STANDARD VERSION

SM-401JET GROUTING VERSION

SM-401MULTIPURPOSE SYSTEM

16

30°

1806

39

46

21°

26

49

2731

9915

HT 70G

HR 60G

HYDRAULIC DRILLING RIG

A new model

SM-401

Transport Condition

98

56

316

67

16

35

63

73

2

17

13

1122 2998 2130367

23

66

4002300

26

81

2312

9915

2998 2130

19

50

0

1122

20

39

2998 2130

17

13

30

00

MAX.ø 90

1491

20

89

20

1063 2997 2130

594

1028

65

00

ST

RO

KE

40

00

ST

RO

KE

30

00

ST

RO

KE15

00

-20

00

ST

RO

KE

Ø225

653

HR 70V

Soilmec SM-401 is a multipurpose drilling rig. Its modular design is engineered for the execution of:Micropiles, Tie-backs, Jet-Grouting, Coring, Drain, Water wells.The rig is fitted with proportional, hydraulic servo-assisted controls that make the operations smooth and troublefree even in the hardest weather conditions. Featured with Load Sensing System, it has lower running costs anda reduced wear and tear on components.Soilmec SM-401 versatility is perfectly shown by the availability of a wide range of rotary heads designed toperform all known drilling technologies and to comply with the most stringent project requirements and to copewith all the geological conditions:Variable speed rotary headAny combination of torque and speed can be set from operator’s console to get the most suited ratio for yourdrilling technology. Standard rotary may be easily modified on site, by fitting purposely-designed kits, to geteither higher torque or higher speed versions.Rotary head with Rollstar gear boxIt provides a maximum torque of 1500 daNm and a maximum speed of 461 rpm.RotopIt combines Soilmec main reduction gear with one commercial brand hammering device.Hydraulic Top HammerThe rig design allows the assembling of any available top hammer brand with a maximum frequency of 2400blow/minute and a maximum energy of 840 Nm.Double head.Hydraulic system is sized to feed any options such as Rotary/Rotary, Rotary/Rotop and Rotary/Top Hammerwithout compromising in power.Soilmec SM-401 may be further tailored with a wide range of optional items such as:- Jet-Grouting kit for mono, bi or three fluids treatment and steeples lifting speed:- 90° mast articulation for tie-back drilling;- Mast rotation by motoreducer for +_ 180°;- Mast for 1.5, 3, 4 and 6.5 m stroke;- Service crane for handling of drilling rods;- Foam Pump;- Dust collector;- Radio operated remote control.

1633

73

2

45°

60-2251593830

60-3151594980

Jack4000894528

Technical DataUNDERCARRIAGE WITH OSCILLATING TRACKSTrack shoe widthOverall lengthOverall widthTravelling speedAverage ground pressureDIESEL ENGINEMake and modelMax Diesel Engine power (SAE J1995)Fuel tank capacityELECTRIC MOTOR (on request)Make and modelRated powerHYDRAULIC SYSTEMHydraulic oil tank capacityROTARY HEADSGear box typeMax. nominal torqueMaximum drilling speedMAST HOIST & FEED SYSTEMFeed TypeFeed strokeMaximum hoist pullMaximum feed forceMaximum speed (fast operation)CLAMP & HYDRAULIC JOINT BREAKERNominal sizeMaximum clamping force (28 MPa)Maximum breaking torqueWINCH and JIBMaximum line pull (1st layer)Maximum rope speed (4st or 5st layer)Rope diameterRope capacity / Rope fittedNOISE LEVELWEIGHT

mmmmmmkm/hMPa

kW (BHp)liter

kW (BHp)

liter

daNm@rpmrpm

mmkNkN

m/min

mmkN

daNm

kNm/minmmm

LwA-LpAkg

400299823002,70,06

CUMMINS QSB 5.9-30-T Tier II119 (160) @ 200 rpm

200

SIEMENS 4 POLS 50Kz90 (121) @ 1485 rpm

400

255710

52/40105 - 81

13400 13400

Gear motor6500604030

HR 70 VVariable

1400238

HT 70 G3 speeds

2000200

HS 60 VVariable

230915

HR 60G3 speeds

1500461

50-3152665060

50-3602665060

60-4152665060

Mast movements

SM-401STANDARD VERSION

SM-401JET GROUTING VERSION

SM-401MULTIPURPOSE SYSTEM

16

30°

1806

39

46

21°

26

49

2731

9915

HT 70G

HR 60G

SM-401HYDRAULIC DRILLING RIG

In 1990 Soilmec was awarded the certification of its own

Quality System to ISO 9001/UNI 29001 series standards.

CERTIFIED QUALITY SYSTEM

G r o u n d E n g i n e e r i n g E q u i p m e n tG r o u n d E n g i n e e r i n g E q u i p m e n t

SOILMEC distributes machinery and structures all overthe world, supported by SOILMEC subsidiary companiesand representative offices as:

SOILMEC LTD - U.K.SOILMEC MISR S.A.E. Co. - EgyptSOILMEC (H.K.) Limited - Hong KongSOILMEC JAPAN CO LTD - JapanSOILMEC MALAYSIA - MalaysiaSOILMEC S.P.A. - Beijing Repr. Office - P.R. ChinaSOILMEC FAR EAST PTE.LTD - SingaporeSOILMEC EMIRATES - U.A.E.SOILMEC GULF - U.A.E.

SOILMEC S.p.A.Drilling and Foundation Equipment5819, via Dismano47023 Cesena (FC) - Italytel. +39-0547-319111fax +39-0547-318548http:// www.soilmec.ite-mail: [email protected]

1 - Crawler undercarriage with +/- 10°oscillating tracks.

2 - Machine body including prime mover,hydraulic plant with load SENSINGcontrol and soundproof canopy.

3 - N° 2 hydraulic outriggers.

4 - Control levers for rig positioning.

5 - Articulated boom for mast positionning.

6 - 4 x 90° turntable for mast rotation.

7 - 1000 mm stroke cylinder for mastshoring.

8 - Rotary cradle with adjusting rollers and400 mm side-shifting device.

9 - Variable speed rotary head with 1400daNm max torque, 238 rpm maxrotation.

10 - Floating system with standard rotaryhead.

11 - Clamp max. diam. 415 mm.

12 - Breaker max. diam. 415 mm.

13 - Control board on rotating arm fordrilling and service functions.

14 - Service winch with jib.

15 - Guiding and lay-out device forhydraulic hoses.

1 2 3

OPTIONALS

1 - Variable Speed RotaryHeads.

2 - Double Head.

3 - Top hammer.

4 - Flushing Pump.

5 - Rod carousel for 6 or 2rods depending on rigconfigurations.

6 - Lifting Crane.

7 - 90° mast articulationfor tie back.

413

4 5 6 7