Hydraulic Devices - ALFRA · battery driven-Compact Flex™ Compact Flex™ SKP-1 Hydraulic cylinder ... Max. size of mounting plates W x H 1.100 x 1.900 mm 1.100 x 1.900 mm 1.100

DEBURRINGCUTTINGPUNCHING DRILLING HEBENLIFTINGw w w . a l f r a . d e

2017

w w w . a l f r a . d e

battery driven-Compact Flex™ Compact Flex™ SKP-1Hydraulic cylinder

Compact™Hand-operated Hydraulic Punch Driver Straight

CompactCombi™Hand-operated Hydraulic Punch Driver 90°

AHP SElectro hydraulic pump

SKP-1 MiniHydraulic cylinder

Technical Data:Hydraulic cylinder SKP-1 with quick coupling (up to 11 t)Weight: 2.5 kg

Technical Data:Hydraulic cylinder SKP-1 Mini with quick coupling (up to 7 t)Weight: 0.86 kg

Technical Data:Max. operating pressure: 700 barPump capacity: 0.58 l/minOil type: HLP 32Tank volume: 3.2 lOperating volume: 2.2 lWeight: 27 kgMotor voltage: 230 V / 50 HzMotor output: 0.75 kWPower input: 3.26 AEngine speed: 2800 rpm

Electro hydraulic pump AHP Sincl. hand switch

Technical Data:Punching capacity (subject to correct choice of ALFRA punching tools) Round holes: up to 152 mm Ø in 3,0 mm mild steel up to 120 mm Ø in 2,0mm stainless steel

Shaped holes: up to 138 x 138 mm in 2,5 mm mild steel or 2.0 mm stainless steelPunching force: 75 KnOperating pressure max.: 680 barWeight: 1.45 kg

Technical Data:Punching capacity (subject to correct choice of ALFRA punching tools) Round holes: up to 152 mm Ø in 3,0 mm mild steel up to 120 mm Ø in 2,0mm stainless steel

Shaped holes: up to 138 x 138 mm in 2,5 mm mild steel or 2.0 mm stainless steelPunching force: 75 KnOperating pressure max.: 680 barWeight: 1.75 kg

Compact™ hand hydraulic StraightPunching set TriCut™ M16 - M40for mild steel S 235

Contents: • 1 aluminium Compact™ hand hydraulic punch• 5 TriCut™ punches and dies M 16 - M 40• 1 Hydraulic screw Ø 19 mm• 1 Hydraulic screw Ø 19 x 9.5 mm• 1 HSS pre-drill Ø 10 mm• 1 set of distance bushes (3 pieces)

CompactCombi™ hand hydraulic 90°Punching set TriCut+™ M16 - M40for mild steel S 235

Contents: • 1 aluminium CompactCombi™ hand hydraulic punch• 5 TriCut+™ punches and dies M 16 - M 40• 1 Hydraulic screw Ø 19 mm• 1 Hydraulic screw Ø 19 x 9.5 mm• 1 HSS pre-drill Ø 10 mm• 1 set of distance bushes (3 pieces)

Technical Data:

Punching capacity (subject to correct choice of ALFRA punching tools) Round holes: up to 152 mm Ø in 3,0 mm mild steel up to 120 mm Ø in 2,0mm stainless steel

Shaped holes: up to 138 x 138 mm in 2,5 mm mild steel or 2.0 mm stainless steelDrivePunching force 75 kN, 16800 lbs with pressure control valve up to 680 Bar/9850 psiPressure sensor auto-recognition of the punching breakthroughRechargeable battery 18 V, Li-Ion 1.5 AhCharging time 30 min. after complete discharge Weight 2.5 kg / 5.5 lbs incl. 1.5 Ah battery

More Highlights• Automatic return• USB-slot, readout data• Service interval indicator

In a sturdy and practical plastic case with exactly cutted inlay and rubberized handle for easy handling.

Technical Data:

Punching capacity (subject to correct choice of ALFRA punching tools) Round holes: up to 152 mm Ø in 3,0 mm mild steel up to 120 mm Ø in 2,0mm stainless steel

Shaped holes: up to 138 x 138 mm in 2,5 mm mild steel or 2.0 mm stainless steel

Punching force: 75 KnOperating pressure max.: 650 barHydraulic hose length: 600 mmWeight: 2.0 kg

Contents: • 1 Compact Flex™ hand hydraulic punch• 1 Hydraulic screw Ø 19.0 x 9.5 mm• 1 HSS pre-drill Ø 11.0 mm• 1 Set of distance bushes, 3 pieces

In a sturdy and practical plastic case with exactly cutted inlay and rubberized handle for easy handling.

Prod.-No. 02082

Prod.-No. 01765

Prod.-No. 02001 Prod.-No. 02050

Prod.-No. 01766

Prod.-No. 02065 Prod.-No. 02013

Prod.-No. 02012

Prod-No. 03854

Hydraulic Devices

w w w . a l f r a . d e

FormCut™ Punching Tool with Notch

FormCut™ rectangularfor heavy connectorsFormCut™ square

Notch pliers FormCut™ Sub-Min-DFormCut™ rectangular

FormCut+™ squarestainless steel

Punching setTriCut™

Punching setTriCut+™

FormCut+™ rectangularstainless steel

TriCut™

TriCut+

™

• For mild steel (S 235)• All punchers have a lateral ejection for the waste piece. No

jamming inside the die• The punchers are delivered in robust and practical plastic cases• When placing an order for hydraulic operation please

specify the hydraulic model Punching tools for hydraulic operation, 46 x 46 mm, max. material thickness 3 mm (S235)

• For mild steel (S 235)• All punchers have a lateral ejection for the waste piece. No

jamming inside the die • The punching tools are delivered in robust plastic case• Special accessories at hydraulic operation

Punching tool complete for hand- or hydraulic operation, 22.0 x 30.0 mm, max. material thickness 2.0 mm (S235)

• All punchers have a lateral ejection for the waste piece. No jamming inside the die

• For punching the cut-outs for 9 – 50-pin connectors. Anti-twist-protected axes are used as tie bolts for punch and die

• The punching tools are delivered in robust plastic case• Special accessories at hydraulic operation

Punching tool complete, 9-pin, 19.8 x 11.3 mm, max. material thickness 2.0 mm (S235)/1.5 mm (stainless steel)

• Easily and quickly punches notches in sheet metal up to 2.0 mm thick

• Notch sizes 3.2 mm and 4.8 mm possible• Max. material thickness 2.0 mm mild steel (S235)• Easy punching thanks to large leverage• Plastic coated handles• Weight 1.3 kg

• For mild steel (S235) and hydraulic operation• The punching tools are delivered in robust plastic case• When die and punch are pressed against each other, the

drilling position is marked on the metal sheet between them. These 4 marks can then be used as a drilling template.

Punching tool complete for hydraulic operation, 36.0 x 112.0 mm, 24-pin, max. material thickness 2.0 mm (S235)

• For mild steel (S 235) • All punchers have a lateral ejection for the waste piece. No

jamming inside the die• The punching tools are delivered in robust plastic case• Special accessories at hydraulic operation

Punching tool complete Ø 22.5 with 3 mm nose, max. material thickness 2.0 mm (S235)

Punching set TriCut™ M12 - M40for mild steel S 235

Contents: • 1 punch and die each• M12 – M16 – M20 – M25 – M32 – M40• 1 BB-screw Ø 6.0 x 40.0 mm• 1 BB-screw Ø 9.5 x 50.0 mm• 1 BB-screw Ø 19.0 x 55.0 mm• 1 pre-drill HSS Ø 10.0 mm• 1 tin of lubricating paste• in practical transport case

Punching set TriCut+™ M16 - M40for mild steel (S235) and stainless steel sheets

Contents: • 1 punch and die each• M 16 – M 20 – M 25 – M 32 – M 40• in practical transport case

• For mild steel (S 235) and stainless steel• All punchers have a lateral ejection for the waste piece. No

jamming inside the die• The punchers are delivered in robust and practical plastic cases• When placing an order for hydraulic operation please

specify the hydraulic model Punching tools for hydraulic operation, 46 x 46 mm, max. material thickness 2 mm (stainless steel)

• For mild steel (S 235) and stainless steel• All punchers have a lateral ejection for the waste piece. No

jamming inside the die• The punchers are delivered in robust and practical plastic cases• When placing an order for hydraulic operation please

specify the hydraulic model Punching tool complete for hand and hydraulic operation, 45.0 x 92.0 mm, max. material thickness 2.0 mm (stainless steel)

Prod.-No. 03015Prod.-No. 01366Prod.-No. 01319

Prod.-No. 01420Prod.-No. 01328Prod.-No. 01305

Prod.-No. 01754 Prod.-No. 01652Prod.-No. 013141

Prod.-No. 013051

PunchingSpecial tools

w w w . a l f r a . d e

MOUNTING TABLES AMT 150 AMTE 200 AMTE 250Prod.-No. 03100 031002 031001Simple and variable fixing of mounting plates using quick-acting clamps ✔ ✔ ✔Intelligent clamping system permits the unrestricted processing of the complete mounting plate

✔ ✔ ✔

Continuously adjustable from vertical to horizontal position by hand crank or cordless drill by battery-operated electric motors by battery-operated electric motors

Continuous height adjustment using angle of tilt using angle of tiltby battery-operated electric motors by battery-operated electric motors

Electric motor - ✔ ✔Battery operation - ✔ ✔Adjustable angle of tilt 0 - 80° 0 - 80° 0 - 80°Working height fixed: 100 cm fixed: 90 cm variable: 80 - 110 cm4 lockable casters ✔ ✔ ✔Max. size of mounting plates W x H 1.100 x 1.900 mm 1.100 x 1.900 mm 1.100 x 1.900 mmMax. load-bearing capacity 200 kg 200 kg 300 kgSpace required 1.400 x 1.200 mm 1.400 x 1.200 mm 1.400 x 1.200 mmWeight 83 kg 93 kg 140 kg

Scope of supply:

Mounting Table AMT 1502 x clamping unit with screw

2 x clamping unit with quick releaseScrew adapter for operation with cordless drill

Electricatl Mounting Table AMTE 2002 x clamping unit with screw

2x clamping unit with quick releaseExternal charger for the battery

Electrical Mounting Table AMTE 2502 x clamping unit with screw

2x clamping unit with quick releaseExternal charger for the battery

04/2

017

Cuts wiring ducts and covers up to 125 mm width exactly and effortlessly in seconds.

Technical Data:• Hand lever operation• Burr-free cutting without waste• Accurate 90° cuts• Full-surface support with laser engraving• Easy to fit to the workbench

For DIN carrier rails, for hand lever operation for cutting pieces to length and punching holes lengthways and crossways. Standard version profiles 35/7.5 – 35/15C-Profile – 15/5.5 – Cu 10.0 x 3.0 mm

Technical Data:• With a reinforced eccentric,

located directly above the shearing blade

• Burr-free cutting without waste

• Maintenance-free• Anodised, laser-engraved length

stop 1,000 mm long with rail-support element for accurate angled cutting, with millimetre and inch scales

Contents:basic unit with punch for cross and oblong holes 12 x 6.4 mm 1,000 mm length stop and rail-support element

For the most common DIN carrier rails, with hand lever operationCuts profile rails 35/7.5 + 35/15 mm exactly and effortlessly

Technical Data:• With rail-support element for

accurate 90° cuts• Maintenance-free• Cutting without waste• Anodised, laser-engraved length stop 1000 mm long with rail-

support element for accurate angled cutting, with millimeter and inch scale

Contents:Complete basis device with length stop and rail support element

Subject to our general sales conditions

Alfra GmbH • 2. Industriestrasse 10 • DE-68766 Hockenheim • Phone: +49 (0) 62 05/30 51-0

Fax.: +49 (0) 62 05/30 51-135 • Internet: www.alfra.de • E-mail: [email protected] DEBURRINGCUTTINGPUNCHING DRILLING HEBENLIFTING

Prod.-No. 031920

Prod.-No. 03199

Prod.-No. 03001

Wiring Duct Cutting Device VKS 125

ALFRA Profile Rail Cutting Device PSG DUO

ALFRA Profile Rail Cutting and Punching Device PSG5+

Mounting TablesWiring Duct Cutting Device Profile Rail Cutting and Punching Device