HYDRAULIC AND LUBE OIL FILTERS AFLD API 614 Series · AFLD API 614 Series Inline Duplex Filters – 232 PSI • up to 630 GPM HYDRAULIC AND LUBE OIL FILTERS Features • Filter series

AFLD API 614 SeriesInline Duplex Filters – 232 PSI • up to 630 GPM

HYDRAULIC AND LUBE OIL FILTERS

Features• Filter series designed to meet the requirements of API 614 for lube oil and other applications.

• Models are available in carbon and stainless steel versions.

• Transfer valve internal components of stainless steel.

• ANSI flange connections standard

• Inlet and outlet connections are located on the same side of the transfer valve.

• Transfer valve and pressure equalization line allow easy changeover between filter housings without costly system shutdown.

• Air bleed line and drain line available.

• ASME coded with ASME-stamp , CRN, AS1210, GOST available

• 2.2 material certificate standard

• 3.1 B material certificate optional

Hydraulic SymbolA

B

A

B

FI FI

Applications

Technical DetailsMounting Method Floor mounted brackets

(Filters must not be used as pipe support)

Port Connection

122/123232/233542/543852/8531322/13232702/2703

1”1.5”2”3”4”6”

ANSI 150# Flanges*ANSI 150# Flanges*ANSI 150# Flanges*ANSI 150# FlangesANSI 150# FlangesANSI 150# Flanges

*(300# and 600# available upon request)

Flow Direction Inlet: Front top Outlet: Front Bottom

Construction Materials (Transfer valve balls and spindle, stainless steel)

122, 232, 542, 852, 1322, 2702 - Carbon Steel 123, 233, 543, 853, 1323, 2703 - Stainless Steel (ASTM 240 Type 316L)

Flow Capacity @ 32 CSt

122/123232/233542/543852/8531322/13232702/2703

53 gpm95 gpm221 gpm278 gpm304 gpm634 gpm

201 lpm360 lpm837 lpm1052 lpm1151 lpm2400 lpm

Housing Pressure Rating

Max.OperatingPressureProof PressureFatigue PressureBurst Pressure

232 psi (16 bar)590 psi (40 bar)Contact HYDAC officeContact HYDAC office*

*other pressures available upon request

Element Collapse Pressure Rating

ON/PO 250 psid (17 bar)

Fluid Temperature Range -22° to 212°F (-30° to 100°C)

Fluid Compatability

Compatible with all petroleum oils and synthetic fluids rated for use with Fluoroelastomer or Ethylene Propylene seals. Contact HYDAC for information on special housing and element constructions available for use with water glycols, oil/water emulsions, and HWBF.

Optional: Indicator Trip Pressure

∆P = 29 psid (2 bar) -10%

Off Shore PowerGeneration

Industrial

Model CodeAFLD ON/PO 1322 C A 5 10 W 1 . X / Z U 150 V DH

Filter TypeElement Media ON/PO = Optimicron® Power with STAT-FREESize 122/123, 232/233, 542/543, 852/853, 1322/1323, 2702/2703Operating Pressure C = 232 psi (16 bar)Type of Change Over Valve A = Ball ValveType of Connection 1 = 1” ANSI 150# Flange (sizes 122/123)* 2 = 1.5” ANSI 150# Flange (sizes 232/233)* 3 = 2” ANSI 150# Flange (sizes 542/543)* 4 = 3” ANSI 150# Flange (sizes 852/853) 5 = 4” ANSI 150# Flange (sizes 1322/1323) 7 = 6” ANSI 150# Flange (sizes 2702/2703) *(300# and 600# available upon request)

Filtration Rating (microns) 10 = ON/PO Type of ∆P Clogging Indicator A = plugged indicator port Indicator Model B = visual (auto-reset) VM...B C = electric switch VM...C D = electric switch and light VM...D/L (lamp voltage selected from supplementary section)

W = no indicator port (standard) (For details and additional indicator options, see pages 213 - 242)Type Code 1Modification Number (latest version always supplied)

Country of Installation (omit) = (non coded) U = ASME Coded with “ASME” Stamp (ZU for ASME-Stamp with documentation) Z = 2.2 material and pressure test certification (standard)

Flange 150 = 150# ANSI FlangeSeals (omit) = Buna-N (standard) V = Fluoroelastomer (FPM)Bypass Valve Cracking Pressure (omit) = No Bypass (API standard) B3 = 43 psid (3 bar) B6 = 87 psid (6 bar)Supplementary L24 = Lamp for 24 Volts (D-type clogging, indicator only) L48 = Lamp for 48 Volts (D-type clogging, indicator only) L110 = Lamp for 110 Volts (D-type clogging, indicator only) L220 = Lamp for 220 Volts (D-type clogging, indicator only) W = SP - indictor with brass piston (for water base fluids) SO103H = Modification of BN4HC Elements for Phosphate Ester Fluids VKD = Drain piping EM = Air bleed valves DH = Cover Lifting Device

Model Codes Containing RED are non-stock items — Minimum quantities may apply – Contact HYDAC for information and availability

Replacement Element Model Code0850 A 010 ON/PO / V

Size 120, 230, 540, 850, 2600, 2700

Filtration Rating (micron) 10= ON/PO

Element Media ON/PO

Supplementary Details (omit) = standard V = Fluoroelastomer (FPM) seals

Sizing InformationTotal pressure loss through the filter is as follows:

Assembly ∆P = Housing ∆P + Element ∆P

Housing Curve:

Pressure loss through housing is as follows:

Housing ∆P = Housing Curve ∆P x Actual Specific Gravity

0.86

Adjustments must be made for viscosity & specific gravity of the fluid to be used! (see sizing section on page 21)

Element K Factors∆P Elements = Elements (K) Flow Factor x Flow Rate (gpm) x

Actual Viscosity (SUS) x Actual Specific Gravity (From Tables Below) 141 SUS 0.86

Required Element Per HousingHousing Size Element Size Elements per Side

122 / 123 120 1

232 / 233 230 1

542 / 543 540 1

852 / 853 850 1

1322 / 1323 2600 1

2702 / 2703 2700 1

Size...A...ON/PO

10 µm Wgt. (lb)

120 0.075 0.95

230 0.037 1.10

540 0.018 3.50

850 0.008 4.50

2600 0.004 14.0

2700 0.004 20.5

All Element K Factors in psi / gpm.

AFLD 2702/2703 Housing w/ANSI 6” 150# Flange

AFLD 232/233 Housing w/ANSI 1.5” 150# Flange

AFLD 542/543 Housing w/ANSI 2” 150# Flange

AFLD 852/853 Housing w/ANSI 3” 150# Flange

AFLD 1322/1323 Housing w/ANSI 4” 150# Flange

0

0.07

0.14

0.21

0.28

0.350 800 1600 2400 3200

0

1

2

3

4

5

0 170 340 510 680 850

∆p in

bar

∆p in

psi

d

Flow in l/m

Flow in gpm

AFLD 122/123 Housing w/ANSI 1” 150# Flange

Dimensions AFLD 122 / 123 / 232 / 233

Size 122 123 232 233

Weight (lbs.) 122 122 269 269

Dimensions shown are for general information and overall envelope size only. Weights listed are without element. For complete dimensions please contact HYDAC to request a certified print.

Size A B C D E F G H I J K L M N O Connection

122-123 [514] 20.24

[126.8] 4.99

[63.4] 2.49

[200] 7.87

[155] 6.10

[230.8] 9.09

[200] 7.87

[155] 6.10

[229] 9.02

[153.5] 6.04

[96] 3.78

[108] 4.25

[183] 7.20

[79.4] 3.13

[195] 7.68

ANSI 150 lb RF 1”

232-233 [595] 23.43

[190.9] 7.52

[95.5] 3.76

[222] 8.74

[220] 8.66

[326.8] 12.87

[243] 9.57

[220] 8.66

[272] 10.71

[170] 6.69

[121.7] 4.79

[145] 5.71

[227] 8.94

[98.4] 3.87

[205] 8.07

ANSI 150 lb RF 1.5”

Dimensions are in inches/millimeters.

OCLEARANCE

FOR ELEMENTREMOVAL B

A

C

F

Ø N

M12D

EOUTLET

INLET

M16

82.6mmØ 3.25in

G

HJ

I

CLEAN SIDEDRAIN PORT(G 3/4")2 PL

DIRTY SIDEDRAIN PORT(G 3/4")2 PL

VENT PORT(G 1/8")2 PL

DIFFERENTIAL PRESSURECONNECTIONS(G 1/4")2 PL

MTRANSFERVALVE HANDLE TURNRADIUS

K

LVENT PORT(G 3/4")2 PL

PRESSURE EQUALIZATION LINE

22mmØ 0.87in

4 PL

100mm3.94in 20mm

0.79in

100mm3.94in

Dimensions AFLD 542 / 543

Size 542 543

Weight (lbs.) 500 500

Dimensions shown are for general information and overall envelope size only. Weights listed are without element. For complete dimensions please contact HYDAC to request a certified print.

Size Connection

542 / 543 2”

Dimensions are in inches/millimeters.

[14.57]370

CLEARANCE REQUIREDFOR ELEMENT REMOVAL

399.9mm16in

231.9mm9.13in

M16

115.95mm4.56in

234.8mm9.24in

170mm6.69in

653.3mm25.72in

INLET2" ASMEB16.5, 150 LBS. RF

OUTLET2" ASMEB16.5, 150 LBS. RF

22mmØ 0.87in

4 PL

100mm3.94in

20mm0.79in

100mm3.94in

314.5mm12.38in

278.8mm11in 82.6mm

Ø 3.25in

170mm6.69in

M12

259.3mm10.21in

DIFFERENTIAL PRESSURECONNECTIONS(G 1/4")2 PL

131mm5.16in

227mmR8.94inTRANSFERVALVE HANDLE TURNRADIUS

170mm6.69in

VENT PORT(G 3/4")2 PL

PRESSURE EQUALIZATION LINE

120.7mmØ 4.75in

DIRTY SIDEDRAIN PORT(G 3/4")2 PL

CLEAN SIDEDRAIN PORT(G 3/4")2 PL

VENT PORT(G 1/8")2 PL

Dimensions AFLD 852 / 853

Size Connection

852 / 853 3”

Size 852 853

Weight (lbs.) 600 600

Dimensions shown are for general information and overall envelope size only. Weights listed are without element. For complete dimensions please contact HYDAC to request a certified print.

[745.4mm]29.35in

[341.4mm]13.44in

[119.5mm]4.70in

[330mm]12.99in

PRESSUREEQUALIZATIONLINE

INLET

OUTLET

DIFFERENTIALPRESSURECONNECTIONS(G 1/4")4 PL

[426.2 mm]16.78"CLEARANCE FORELEMENT REMOVAL

DIRTY SIDEDRAIN PORT(SAE-8)2 PL

[437.5mm]R17.22inTRANSFER VALVEHANDLETURN RADIUS

[253.2mm]9.97in

[139.7mm]5.50in

[785.8mm]30.94in[506.4mm]

19.94in

[80mm]3.15in

VENT PORT(SAE-8)2 PL

[170mm]6.69in

TO FLANGEFACE

[506.4mm]19.94in

[200mm]7.87in

[10.1mm]Ø0.40in

4 PL

[336.2mm]13.24in

Dimensions AFLD 1322 / 1323

Size Connection

1322 / 1323 4”

Size 1322 1323

Weight (lbs.) 700 700

Dimensions shown are for general information and overall envelope size only. Weights listed are without element. For complete dimensions please contact HYDAC to request a certified print.

52.06in[1322.4mm]

[101.6mm]4.00in

[200mm]7.87in

9.84in[250mm]

8.50in[216mm]

[940mm]37.00inCLEARANCE FORELEMENT REMOVAL

PRESSUREEQUALIZATIONLINE

INLET

OUTLET

DIFFERENTIALPRESSURECONNECTIONS(SAE-6)2 PL

DIRTY SIDEDRAIN PORT(SAE-12)2 PL

CLEAN SIDEDRAIN PORT(SAE-12)2 PL

317mmR12.48inTRANSFER VALVEHANDLETURN RADIUS

[294.2mm]11.58in

[958.6mm]37.74in

[588.4mm]23.17in

[175.7mm]6.92in

VENT PORT(SAE-4)2 PL

[266.7mm]10.50in

[266.7mm]10.50in

[22.2mm]Ø 0.88in

8 PL

[266.7mm]10.50in

[266.7mm]10.50in

[873.8mm]34.40in

[130mm]5.12in

© Copyright 2012 HYDAC TECHNOLOGY CORPORATION • Filters • TECH DATA • 1202-1409

Dimensions AFLD 2702 / 2703

Size Connection

2702 / 2703 6”

Size 2702 2703

Weight (lbs.) 820 820

Dimensions shown are for general information and overall envelope size only. Weights listed are without element. For complete dimensions please contact HYDAC to request a certified print.

16.73in425mm

11.81in300mm

37.97in964.5mm

INLET

OUTLET

19.69in[500 mm]CLEARANCE FORELEMENT REMOVAL

R12.48in317mm

TRANSFER VALVEHANDLE

TURN RADIUS

12.85in326.5mm

7.25in184.2mm

R4.33in110mm

PRESSURE EQUALIZATIONVALVE

TURN RADIUS

39.49in1003mm

25.71in653mm

7.48in190mm

PRESSUREEQUALIZATIONVALVE

9.84

in25

0mm

7.48

in19

0mm

25.3

1in

643m

m

0.87

in22

mm

4 P

L

9.39in238.5mm

16.34in415mm

15.06in382.5mm

CLEAN SIDEDRAIN PORT(G 3/4")2 PL

DIRTY SIDEDRAIN PORT(G 3/4")2 PL

VENT PORT(G 3/4")2 PL

DIFFERENTIALPRESSURECONNECTIONS(G 1/4")2 PL