No details guaranteed but believed correct. Hydraulic Anchor Mooring Winches TTR Code no.: 11.047 + 11.048 Specifications Make : Sunderland Forge Engineering Built : 1987 Line pull : 650 kN @ 207 bar (1 st layer) Line speed : 12-20 mtr / min @ (1 st layer) Drum size (Lebus Grooved) Drum diameter : 900 mm Drum length : 1250 mm Flange diameter : 2400 mm Wire capacity : 1500 mtr steel wire Ø 48 mm (13 layers) Drive Hydraulic motor : Hagglund 63-16300 Dimensions Dimensions o.a. : 4800 x 3290 x 3000 mm (L x W x H) Weight : Approx. 22500 kg (excl. steel wire) Approx. 36000 kg (incl. 1450 mtr steelwire Ø48 mm) General - Drum Lebus grooved - Lebus fleet angle corrector - Dog clutch - Disc brake for dynamic braking - Band brake for static braking An average line tension of 10 tonne at line speeds of up to 135 mtr/min is available for ‘’Shooting’’ the line.