Ø2” (50mm) X 20m FOA-4-(50)-20-T3 Fire Hose is constructed with high tenacity synthetic woven textile reinforcement, and encased in a light weight cover of red nitrile rubber which form a uni�ied inside lining and outside lining. Hydrant Equipment Fire Hose (Type 3) c/w Vietnam Alu Coupling Other standard types of connections such as BS336 instantaneous coupling, etc... are available Fire Hose Heat Resistant – Has excellent heat resistance with the cover providing good protection against accidental contact with hot embers. Oil & Chemical Resistant – Construction and blend of PVC / Nitrile rubber gives good resistance against contact with a wide range of chemicals. Weather Resistant – Has excellent resistance against ozone and atmospheric weathering and gives good performance at both low and high temperature. Maintenance Free – Does not need drying, unaffected by mildew and is rot-proof and waterproof. Features Application CONFORMING TO • BS 6391 : 1983 – Non-percolating lay �lat hoses and hose assemblies for �ire �ighting purposes. • TCVN 2622 : 1995 - Vietnam Standard requirement for �ire hose coupling and ancillary Equipment Sizes & Length Model Fire Brigade Shipboard Wash Down and Maintenance Petrolchemical Complexes Industrial Fire Hose Stations In-Plant Fire Protection Petroleum Re�ineries Commercial Complexes • • • • • • • • FOA-4-(50)-30-T3 Ø2” (50mm) X 30m Ø2” (65mm) X 20m FOA-4-(65)-20-T3 FOA-4-(65)-30-T3 Ø2” (65mm) X 30m Fire Hose (Type 3) Engineering Co., Ltd Minh Sang Minh Sang Due to constant improvement in our products, we reserved the right to modify or withdraw any product or service without prior notice.