51 E 7.206.1/03.12 51 E 7.206.1/03.12 Filter mesh pack protected by outersleeve The star-pleated filter mesh pack is enclosed in a stable outer plastic sleeve. This sleeve distibutes the incoming fluid evenly over the mesh pack (diffusor effect). In addition the fluid does not flow directly through the mesh pack, and this protects it from pulsating flows. In this way, the element achieves extremely high flow fatigue stength values. Moreover, the mesh pack is protected against mechanical damage, e.g. when elements are being installed. Since the outer sleeve permits overprinting with the customer logo, it can be used as an advertising medium for OEMs, thus ensuring spare parts business. At the same time the user can rely on the fact that he is always buying a genuine spare part. High operational reliability, because the sensitive filter mesh pack is protected against direct fluid flows and pulsation Low energy consumption, because due the uniform distribution of the fluid (diffusor effect), a particularly low ∆p is achieved across the element Ease of handling, because the compact element is protected against damage in transit and during its installation Protection against product piracy through “brand labeling” Use of electrically conductive plastics and innovative filter media Due to a complete revision of the materials used, e.g. conductive plastics, full discharge-capability of the filter elements was achieved. Charging of the filter elements during operation was therefore reduced to an absolutely uncritical level. This means that risks such as sudden sparking and the subsequent formation of black carbon or sludging of the oil are reliably eliminated. High operational reliability, because the filter element is fully discharge-capable The figure shows elements with customer logo, which are increasingly used across all industrial sectors. Particularly advantageous: The logo is also perfectly legible when the filter is dirty, that is, when the element is actually changed. "Brand labeling" by HYDAC will result in an enormous increase in your spare parts business and improve the process quality through the use of genuine spare parts. Discharge on a discharge-capable element No discharge on an element, which is not discharge-capable oil oil oil oil oil oil Öl oil oil oil oil oil oil Class Filter Element Technology.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
51
E 7.
206.
1/03
.12
51
E 7.
206.
1/03
.12
Filter mesh pack protected by outersleeve
The star-pleated filter mesh pack is enclosed in a stable outer plastic sleeve. This sleeve distibutes the incoming fluid evenly over the mesh pack (diffusor effect). In addition the fluid does not flow directly through the mesh pack, and this protects it from pulsating flows. In this way, the element achieves extremely high flow fatigue stength values. Moreover, the mesh pack is protected against mechanical damage, e.g. when elements are being installed. Since the outer sleeve permits overprinting with the customer logo, it can be used as an advertising medium for OEMs, thus ensuring spare parts business. At the same time the user can rely on the fact that he is always buying a genuine spare part.
High operational reliability, because the sensitive filter mesh pack is protected against direct fluid flows and pulsation
Low energy consumption, because due the uniform distribution of the fluid (diffusor effect), a particularly low ∆p is achieved across the element
Ease of handling, because the compact element is protected against damage in transit and during its installation
Protection against product piracy through “brand labeling”
Use of electrically conductive plastics and innovative filter media
Due to a complete revision of the materials used, e.g. conductive plastics, full discharge-capability of the filter elements was achieved.
Charging of the filter elements during operation was therefore reduced to an absolutely uncritical level. This means that risks such as sudden sparking and the subsequent formation of black carbon or sludging of the oil are reliably eliminated.
High operational reliability, because the filter element is fully discharge-capable
The figure shows elements with customer logo, which are increasingly used across all industrial sectors.
Particularly advantageous: The logo is also perfectly legible when the filter is dirty, that is, when the element is actually changed. "Brand labeling" by HYDAC will result in an enormous increase in your spare parts business and improve the process quality through the use of genuine spare parts.
Discharge on a discharge-capable element
No discharge on an element, which is not discharge-capable
oil
oil
oil
oil
oiloil
Öl
oil oil
oiloil
oil oil
Class Filter Element Technology.Betamicron®4. High-
E 7.
624.
1/07
.12
235
Flexmicron P (Premium)
DescriptionThe filter elements of the FlexMicron P (Premium) product line are durable elements in pleat technology, manufactured in meltblown or high-quality fibreglass technique.They are used particularly in applications requiring highest levels of cleanliness.
Applications zHigh-end industrial part washing systems (aqueous & hydrocarbon up to 100 °C) zFlushing rigs (after part washing systems) zTest rigs (fuel injection, braking and steering systems) zSuperfinishing with cooling lubricants (honing, grinding, turning, milling, deburring) zOffline filtration in large hydraulic systems zOffline filtration in lubrication systems zFilling systems used in cleanliness applications zMining and metallurgy zMetal-forming (e.g. hydroforming)
Special features zß-values up to 20,000 zFiltration efficiency up to 99.99% zFiltration rating 1 ... 40 µm zVery low starting Δp zHigh differential pressure stability zExcellent filtration efficiency, also under pulsation conditions (pressure and flow rate pulsation) zWide range of adapters zMaterials: Polyester, glass fibre zPleat technology zExcellent fluid compatibility zCommonly used element geometry
Technical DetailsGeneral dataLength 10", 20", 30", 40"Filtration rating 1 ... 40 µmßx-values up to 20,000Filtration efficiency up to 99.99 %
End cap type 1 = plug-in adapter (1x 222 O-ring), flat end cap, element Ø 64 mm 2 = plug-in adapter (2x 222 O-ring), flat end cap, element Ø 64 mm 3 = plug-in adapter (2x 222 O-ring), flat end cap, element Ø 70 mm 5 = plug-in adapter (2x 222 O-ring), locating spigot, element Ø 70 mm 7 = bayonet (2x 226 O-ring), locating spigot, element Ø 70 mm 10 = open (gasket DOE), element Ø 64 mm 12 = Cuno adapter (hanging elements), element Ø 64 mm others on request
Seal material F = FKM (FPM, Viton®) N = NBR E = EPDM
Maximum differential pressure Δpmax and permitted temperature range at the element:
Fluid temperature
Filter materialPES
-10 ... 30 °C 8 bar-10 ... 60 °C 6.5 bar-10 ... 100 °C 5 bar
SizingThe total pressure drop of the filter at a certain flow rate is the sum of the housing Δp and the element Δp. The housing pressure drop can be determined using the pressure drop curves. The pressure drop of the elements is calculated using the R factors.The following calculation is based on clean filter elements.
Δp [bar] = R x V (mm²/s) x Q (l/min)
n x l (inch) x 1000
R = R factor V = Viscosity (mm²/s) Q = Flow rate (l/min) n = No. of elements l = Element length (inch)
Maximum permitted flow rateElement length Maximum permitted
Dimensions of Flexmicron P ElementsDescription L1 in mm L2 in mmN10FM-P... 263 18N13FM-P... 339 18N20FM-P... 517 18N30FM-P... 771 18N40FM-P... 1025 18
Description L1 in mm L2 in mmN10FM-P... 263 18N13FM-P... 339 18N20FM-P... 517 18N30FM-P... 771 18N40FM-P... 1025 18
Description L1 in mm L2 in mmN10FM-P... 263 18N13FM-P... 339 18N20FM-P... 517 18N30FM-P... 771 18N40FM-P... 1025 18
Description L1 in mm L2 in mmN10FM-P... 263 18N13FM-P... 339 18N20FM-P... 517 18N30FM-P... 771 18N40FM-P... 1025 18
Description L1 in mmN10FM-P... 254N13FM-P... 330N20FM-P... 508N30FM-P... 762N40FM-P... 1016
N40MR-P...-990 988
Description L1 in mmN37FM-P... 977
Description L1 in mmN10FM-P... 241N13FM-P... 317N20FM-P... 495N30FM-P... 749N40FM-P... 1003
45.5
L2L1
64
45.5
L2L1
6470
L2L1
45.5
L2
70
25.5 L1
45.5
58.5
22.525.5
70
L114
64
L13
55
61 65
L16.5
64
Type 1: Plug-in adapter 1 x O-ring (-222), flat end cap
Type 2: Plug-in adapter 2 x O-ring (-222), flat end cap
Type 3: Plug-in adapter 2 x O-ring (-222), flat end cap
Type 5: Plug-in adapter 2x O-ring (-222), locating spigot
Type 7: Bayonet, 2x O-ring (-226), locating spigot
Type 10: Gasket (DOE), open
Type 12: Cuno adapter (suspended elements)
E 7.
624.
1/07
.12
238
NOTEThe information in this brochure relates to the operating conditions and applications described.For applications and operating conditions not described, please contact the relevant technical department.Subject to technical modifications.
HYDAC FiLTER SYSTEMS GMbHIndustriegebiet D-66280 Sulzbach / Saar Tel.:+49 (0) 6897/509-01 Fax:+49 (0) 6897/509-846 Internet: www.hydac.com E-Mail: [email protected]
E 7.
625.
0/11
.10
239
Flexmicron S (Standard)
DescriptionThe filter elements in the Flexmicron S (Standard) product line are SpunSpray depth filter elements produced using melt-blown technology. They are used particularly in applications where a high level of fluid cleanliness and material purity is required.
Applications z Industrial part washing systems (aqueous up to 60 °C) zTransmission test rigs, hydraulic test rigs zSuperfinishing with cooling lubricants zPaints and coatings zCooling circuits on machines zFilling systems zRefineries, chemical industry zSemiconductor industry zOffline filtration in large hydraulic systems zOffline filtration in lubrication systems
Special features zFiltration rating 1 ... 90 µm zMaterial purity zCaps welded, not glued zWide range of adapters zGood price/performance ratio zMaterials: Polypropylene, Polyamide zSpunSpray technology, material not wound zHigh level of cleanliness due to graded depth filter construction zHigh contamination retention due to large depth effect of the filter material zExcellent fluid compatibility zStandard element geometry
Maximum differential pressure Δpmax and permitted temperature range at the element:
Fluid temperature
Filter materialPA PP
-10..30 °C 7 bar 4 bar-10...60 °C 5.5 bar 2 bar-10...100 °C 3.5 bar –
SizingThe total pressure drop of the filter at a certain flow rate is the sum of the housing Δp and the element Δp. The housing pressure drop can be determined using the pressure drop curves. The pressure drop of the elements is calculated using the R factors.The following calculation is based on clean filter elements.
Δp [bar] = R x V (mm²/s) x Q (l/min)
n x l (inch) x 1000
R = R factor V = Viscosity (mm²/s) Q = Flow rate (l/min) n = No. of elements l = Element length (inch)
Designation L1 in mmN10FM-S... 254N20FM-S... 508N30FM-S... 762N40FM-S... 1016
Designation L1 in mmN10FM-S... 254N20FM-S... 508N30FM-S... 762N40FM-S... 1016
Designation L1 in mm L2 in mmN10FM-S... 263 20N20FM-S... 517 20N30FM-S... 771 20N40FM-S... 1025 20
Designation L1 in mm L2 in mmN10FM-S... 263 20N20FM-S... 517 20N30FM-S... 771 20N40FM-S... 1025 20
Designation L1 in mmN10FM-S... 241N20FM-S... 495N30FM-S... 749N40FM-S... 1003
Designation L1 in mmN10FM-S... 263N20FM-S... 517N30FM-S... 771N40FM-S... 1025
Dimensions of Flexmicron S Elements
Type 0: Compression ring (DOE), no cap or seal
Type 1: Plug-in adapter, 1 x O-ring (-222), flat end cap
Type 2: Plug-in adapter, 2 x O-ring (-222), flat end cap
Type 10: Gasket (DOE)
Type 13: Plug-in adapter, 2 x O-ring (-222), locating spigot
Type 14: Bayonet, 2 x O-ring (-226), locating spigot
E 7.
625.
0/11
.10
242
NoteThe information in this brochure relates to the operating conditions and applications described.For applications and operating conditions not described, please contact the relevant technical department.Subject to technical modifications.
HYDAC FiLtER SYStEMS GMbHIndustriegebiet D-66280 Sulzbach / Saar Tel.:+49 (0) 6897/509-01 Fax:+49 (0) 6897/509-846 Internet: www.hydac.com E-Mail: [email protected]
E 7.
626.
0/11
.10
243
Flexmicron E (Economy)
DesignationThe filter elements in the Flexmicron E (Economy) product line are depth filter elements produced using melt-blown technology. They are used particularly in applications where an average level of fluid cleanliness and material purity is required and they provide a cost-effective solution.
Applications z Industrial part washing systems (aqueous up to 60 °C) zPaints and coatings zCooling circuits on machinery zRefineries, chemical industry zProcesses using cooling lubricants
Special features zFiltration efficiency 95 % zFiltration rating 1 ... 90 µm zMaterial purity zEnd caps welded, not glued zWide range of adapters zCost-effective zMaterials: Polypropylene zSpunSpray technology, material not wound zExcellent fluid compatibility zStandard element geometry zGood level of cleanliness due to graded depth filter construction zHigh contamination retention due to large depth effect of the filter material zManufactured without any contact with oil or silicon, so can be used to filter paints and coatings
Maximum differential pressure Δpmax and permitted temperature range at the element:
Fluid temperature
Filter materialPP
-10..30 °C 4 bar-10...60 °C 2 bar
-10...100 °C –
SizingThe total pressure drop of the filter at a certain flow rate is the sum of the housing Δp and the element Δp. The housing pressure drop can be determined using the pressure drop curves. The pressure drop of the elements is calculated using the R factors.The following calculation is based on clean filter elements.
Δp [bar] = R x V (mm²/s) x Q (l/min)
n x l (inch) x 1000
R = R factor V = Viscosity (mm²/s) Q = Flow rate (l/min) n = No. of elements l = Element length (inch)
Designation L1 in mmN10FM-E... 254N20FM-E... 508N30FM-E... 762N40FM-E... 1016
Designation L1 in mmN10FM-E... 254N20FM-E... 508N30FM-E... 762N40FM-E... 1016
Designation L1 in mm L2 in mmN10FM-E... 263 20N20FM-E... 517 20N30FM-E... 771 20N40FM-E... 1025 20
Designation L1 in mm L2 in mmN10FM-E... 263 20N20FM-E... 517 20N30FM-E... 771 20N40FM-E... 1025 20
Designation L1 in mmN10FM-E... 241N20FM-E... 495N30FM-E... 749N40FM-E... 1003
Designation L1 in mmN10FM-E... 263N20FM-E... 517N30FM-E... 771N40FM-E... 1025
Dimensions of Flexmicron E Elements
Type 1: Plug-in adapter, 1 x O-ring (-222), flat end cap
Type 2: Plug-in adapter, 2 x O-ring (-222), flat end cap
Type 10: Gasket (DOE)
Type 13: Plug-in adapter, 2 x O-ring (-222), locating spigot
Type 14: Bayonet, 2 x O-ring (-226), locating spigot
Type 0: Compression ring (DOE), no cap or seal
E 7.
626.
0/11
.10
246
NoteThe information in this brochure relates to the operating conditions and applications described.For applications and operating conditions not described, please contact the relevant technical department.Subject to technical modifications.
HYDAC FiLtER SYStEMS GMbHIndustriegebiet D-66280 Sulzbach / Saar Tel.:+49 (0) 6897/509-01 Fax:+49 (0) 6897/509-846 Internet: www.hydac.com E-Mail: [email protected]
E 7.
635.
0/12
.12
247
Trimicron Filter Element N1TM, N3TM
DescriptionThe filter elements in the Trimicron series have been specially developed for the combined filtration of:
from hydraulic and lubrication oils in the bypass flow.They are a combination of pleated and SpunSpray depth filter elements. The filter layers used are produced using melt-blown technology (synthetic fibres).
Applications zOffline filtration in lubrication systems (e.g. in wind turbines) zOffline filtration in hydraulic systems zTransmission and hydraulic test rigs
Special features zExcellent filtration performance (ß 5 (c) > 1000) zLow initial differential pressure zHigh contamination retention capacity zFine particle contamination, water and oil ageing products removed by depth filter material zBroad range of fluid compatibility zSimple element change
Technical specificationsGeneral specifications
N1 N3Contamination retention capacityISOMTD at ∆P = 2.5 bar
≈ 410 g ≈ 2500 g
Water retention capacity ≈ 680 ml ≈ 2.2 lBeta value ß 5 (c) @ 2 bar > 1,000 > 1,000
Filtration rating 3 µmDifferential pressure at starting point < 0.1 barPermitted fluid temperature range -10 ... 80 °CStorage temperature range 5 … 40 °C
NoteThe information in this brochure relates to the operating conditions and applications described.For applications and operating conditions not described, please contact the relevant technical department.Subject to technical modifications.
DescriptionThe Wombat element is a pleated filterelementdesignedtoflowfromtheinsideoutwardandfilterhighamountsofcontaminationwithhighefficiency.TheWombatelementcanbeinstalledinbagfilterhousingsandreplacetheexistingfilterbag.Anadapterkitisneededforfiltration.Thisonlyneedstobeinstalledonceandconsistsofaretainerbasketandseal.Barmagnetsareavailableasanaccessoryforfilteringmagneticparticles.