Hybrid Vacuum Fiber Optic Feedthrough Hermetic fiber optic and adapter feedthroughs with pigtail interface VF - 1FC01 - FC/APC VF - 1FC01 - FC/APC - KF16 VF - 1FC01 - FC/APC - KF16 FC/APC CONNECTOR TUBBING 3 mm MAT. STAINLESS STEEL KF 16 FLANGE MAT. STAINLESS STEEL For More Information contact us at +420 493 765 111 or [email protected] SQS Vláknová optika a.s., Komenského 304, 509 01 Nová Paka, Czech Republic www.sqs-fiberoptics.com Sealed fibers SM & MM (GRIN/STEP) PM Wavelength range UV, VIS, NIR VIS, NIR Extinctio ratio / >20 or > 25dB Angle missalingment / ± 2.5° Operating temperature -40 + 85°C -20 + 70°C Hermeticity -10 -12 10 to 10 mbar.l/s Flange type CF, KF, without flange Flange material 304, 304L, 316L, others Housing material 304L, 316L Pigtail interface FC/PC, FC/APC, SMA905, LC/PC, LC/APC, ... Adapter interface FC/PC, FC/APC, SMA905 Fiber sleeving (loose tubing) PTFE (OD=900um), Stainless steel flexible tubing (O=3mm) High Vacuum (HV) & Ultra High Vacuum (UHV) Feedthroughs 3D DRAWING INSPIRED BY CUSTOMERS 1 2 2 2 FC/APC CONNECTOR FC/APC FC/APC ADAPTER ADAPTER TUBBING 3 mm MAT. STAINLESS STEEL WALL 5 - 7 mm HOLE 44,7 13 200 +5 0 Ø 8 ± 0.1 Ø 44,7 (6) 200 +5 0 13 Ø 1 2 Pigtailed variants of vacuum hybrid feedthroughs ate available with many different optical fibers and connectors. Standard adapter interface is available with FC/PC, FC/ APC or SMA905 connectors. Hybrid feedthroughs are available with pigtailed terminations on the natural air pressure side or on vacuum side. Used materials as well as the sealing process of the fiber within the feedthroughs enable the usage of hybrid feedthroughs in high and ultra-high vacuums. Feedthrough can be disassembled and easily mounted into a flange; mating sleeves inside feedthrough on an adapter side can be easily replaced. O-RING