Technical Data Sheet HV Fuse CHANGEABLE FUSE H1S103-92SLF0B1-Y Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Tel. : +49 8684 18-0 Email : [email protected]Page 1 / 3 RF_35/05.10/6.2 Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG All dimensions are in mm Interface According to RN_091-01 Documents Fuse Datasheet LC HEV Fuse Material and plating Connector parts Material Plating Center contact Copper Silver, min. 3 μm HVIL - contact Bronze Silver, min. 3 μm Shielding contact Bronze Silver, min. 0,5 μm Housing PBT-I-GF30 Gasket Silicone Insulator 1 PBT GF20 Insulator 2 PBT GF20
3
Embed
HV Fuse CHANGEABLE FUSE H1S103-92SLF0B1-Y · 2020-01-23 · Degree of protection (mated pair) IP 49K / IP X7 according to ISO 20653 RoHS compliant Packing Standard 60 pcs. in box
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Outer contact resistance ≤ 10mΩ Test voltage 2700 VDC Working voltage max. 450 VDC (10A,15A,20A,30A) 425 VDC (40A) Interrupting Rating 10kA @ 450 VDC (10A,15A,20A,30A) 10kA @ 425 VDC (40A)
EMV (shielding effectiveness) ≥ 70 dB up to 5 MHz (IEC 62153-4-7)
≥ 65 dB 5MHz to 500 MHz (IEC 62153-4-7)
Mechanical data Mating cycles ≤ 25 Engagement force ≤ 100 N Disengagement force ≤ 100 N Retention Force connector ≤ 100 N Coding efficiency ≥ 100 N
Environmental data Temperature range -40°C to + 80°C Temperature and humidity according to LV 214, PG21 Vibration according to LV 214, PG17, severity level 2 Degree of protection (mated pair) IP 49K / IP X7 according to ISO 20653 RoHS compliant
Packing Standard 60 pcs. in box Weight 84 g/pce
Coding Part Number has to be accomplished by codification
Draft Date Approved Date Rev. Engineering change number Name Date
P. Leuschner 08.09.17 F.Wein 08.05.19 300 19-0882 T.Niepalla 08.05.19
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our
products, we reserve the right to make changes judged to be necessary.