Husqvarna Accessory 2011 Ireland

2011HUSQVARNA AcceSSoRy ANd oUtdooR geAR

Protective clothing, work wear and range accessories specifically designed to get the job done.

Comfortable, proteCting and praCtiCal Clothes

head and ear proteCtion

bars, Chains and filing

strong, durable, praCtiCal tools

All Husqvarna products are the result of extensive development and years of research. When developing and designing accessories we work in close cooperation with the most demanding professional users and we listen carefully to their views. We continually strive to design, develop and produce accessories that put you in control. This means genuine Husqvarna accessories that will perform the way you expect and need them too. You’ll find that our comprehensive range of protective clothing, work wear and product accessories covers everything needed for continued levels of high productivity and good protection, for a comfortable, productive, working regime.

boots and shoes for proteCtion

Husqvarna conducts continuous product development and reserves the right to change designs, specifications and equipment levels without prior notification. All products with moving parts can be dangerous if used improperly. Always read the instructions carefully. Equipment and performance can vary from market to market. Ask your dealer about available equipment and performance in your market. All technical data was current at time of printing. However such data is subject to change due to product development. We cannot accept responsibility for printing errors.

SAFety StANdARdS 4

HUSQVARNA SAFety eQUIPMeNt 5

PRotectIVe clotHINg 6technical protective clothing 8functional protective clothing 10Classic protective clothing 12high visibility clothing 14all-weater clothing 15rainwear 16for warmth 17helmets 18goggles 19hearing protection 20gloves 21protective boots and socks 22

HARNeSSeS 24

cUttINg eQUIPMeNt 26bars and chains 28filing equipment 30trimmer heads, lines and blades 32Cutting equipment guide 34

FoReSt ANd gARdeN toolS 36oil 38Cans 40forestry accessories 41bags 43

4

safety standards

layered protection. Through advanced technology we have developed chainsaw protective material that comprises of fewer layers making it lighter but still with the same levels of protection. Should an accident occur, the material and layering consists of long fibres designed to get tangled in the chain.

Safe in the knowledge that it’s Husqvarna protective clothing from head to toe.

When you are working with high-powered chainsaws, high quality protective clothing is of the upmost importance. There are a large number of developments in materials for protective clothing but through rigorous monitoring of manufactured protective clothing, users can feel secure in the know ledge that the clothing they are wearing has met the standards and tests stipulated for safety requirements. Practical protective clothing and safety accessories must be used in combination to ensure the best possible protection and optimum safety. For protection at work, it has to be used. But please remember always read

the user manual and use common sense when working with machines in the forest or garden. That’s why we put a lot of time into making our protective equipment and clothing so comfortable and ergonomic that you can use them without being restricted or bothered while you work. Good protective equipment must withstand the wear inflicted by long shifts and demanding conditions. The fit and the protective qualities of protective clothing must be retained after it has been used, washed and cleaned. That’s why Husqvarna selects the best materials for the job they are needed for.

Stay safe, stay protected.It’s important that you wash your clothing regularly to help maintain its protective values and check for damage. That goes for all clothing including gloves and helmets. Replace any damaged items. Read labels for advice.

the most rigorous safety testing.Protective clothing for forestry work must carry CE marking. When it also carries the EuroTest mark, you know that randomly selected samples are regularly re-inspected by an accredited institute. EuroTest shows that the manufacturer has made every effort to ensure that every sample it produces fulfils the safety requirements. CE marks and the Euro Test logos can be found on Husqvarna certified clothing. Numbers regarding the safety standards i.e. EN381 can be found on many items. These numbers are there as a standards mark showing that these items have been thoroughly tested in compliance with the required testing methods set out by the European Council. Items which carry these safety testing labels does not offer 100 % protection, but common sense will also benefit your safety when working with chainsaws.

Cut protection areas to Model A and Model C. The shaded areas show where blocking material is located to protect the body parts behind.

Model A.

FRoNt

FRoNt

BAcK

BAcK

Model c.

5

husqvarna safety features

Husqvarna’s oils continue to pass tough tests.When developing a good two-stroke oil it’s important to be sure that the oil lubricates well. Here at Husqvarna we have developed a unique testing method that makes it possible to measure the temperature of the crank pin bearing while the engine is running. When the oil runs at a high temperature it is a sign of bad lubrication. If the temperature reaches the yellow area, as seen in the diagram, the temperature is too high, the material of the bearing starts to become soft, and it’s just a matter of time until the bearing seizes. You can also see in the diagram the Husqvarna oil stays under that critical temperature. When using a Husqvarna oil you can be sure that your engine gets the lubrication needed.

teMPeRAtURe, cRANK BeARINg

Bend test acc to ISo. Bend test on bars.Impact test acc to ISo.

Safety is always a priority for Husqvarna products. Safety is always a high priority when it comes to our products. But not just as a consideration during product development even our accessories and oils are put through the most rigorous tests to ensure they offer the best performance and safety.

RIgoRoUS teStINg FoR PeRFoRMANce ANd SAFety

Testing and fulfilling ISO, EN and ANSI standards is a natural step in the process of develop new Husqvarna accessories. International standards as well as our own internal demands, give you the satisfaction that you have chosen the best product for your job. To be sure that our products provide lasting quality, the components are continuously tested during the production process. Testing and the evaluation of materials as well as process parameters is also typical for Husqvarna product development. As an example, the material chosen for our grass blades gives an extremely good combination between high strength, hardness and durability.

engine displacement below 55 cm³

Tem

pera

ture

, cra

nk b

eari

ng

Tem

pera

ture

, cra

nk b

eari

ng

Time Time

engine displacement above 55 cm³

Bearing failure

Critical temperature

Harmless temperature level

Reference 2-stroke oil

Husqvarna XP 2-stroke oil

Big

mar

gin

Big

mar

gin

6

technical.Husqvarna’s Technical range of protective clothing features the new stretch material, 4-way stretch. The stretch provides extra comfort and flexibility, essential qualities for professionals who use their work wear all day, every day.

Functional.The Functional range successfully combines low weight with current safety requirements to provide optimum performance safety clothing.

classic.By maintaining close contact with the forestry workers Husqvarna have been able to develop a range to meet every aspect of safety requirements. The Classic range brings chainsaw protection but in simpler clothing styles.

Complete helmets with visor, hearing protection, sun peak and neck guard. specifically designed to work with you.

functional smart solutions. vents and pockets designed with you in mind.

intelligent designed jackets with leading edge technology for greater protection.

7

cordura and Aramid.Cordura is a durable synthetic material used in clothing for tough jobs in tough conditions. Aramid is also used and is a class of heat-resistant and strong synthetic fibres. This is used in aerospace and military applications, for ballistic rated body armour fabric, and as an asbestos substitute. The synthetic fibre Aramid has a high strength-to-weight ratio, so the clothes are light and comfortable.

graded labels show protection class.You’ll find this labelling on all our saw protection clothing. It is ranked depending on its ability to stop the chain at different speeds. All of our clothing fulfils the requirements for Class 1 (20 m /s). In addition, on trousers model, Functional 24, we have Class 2 (24 m /s), on gloves Class 0 (16 m /s) and on boots Class 1 (20 m /s), Class 2 (24 m /s) and Class 3 (28 m /s).

intelligently designed

Safety helmet replacement.Helmets are designed with high quality, wear resistant materials but will not last forever. The protective properties of the helmet degrades when exposed to the working environment, extreme temperatures, sun light as well as normal day-to-day wear and tear. Read instructions for further advice about helmet replacement.

aramid reinforced protective trousers. protection when and where it counts.

4-way stretch material makes it easier to work offering greater flexibility.

reinforced, shaped, water repellent gloves. designed for protection and comfort.

forest JaCKet teChniCal JaCKet arbor 20

Safety requirements No standard needed EN 381 Class 1, 20 m /s, CE, Euro TestedMaterial, front 4-way stretch material 100 % ultra polyesterMaterial, back 4-way stretch material 100 % ultra polyesterReinforced area End of arms in Cordura End of arms in CorduraBreathability Normal NormalVentilation features Mesh, ventilation back of yoke and through front pockets Ventilation in back of yokeWater resistantWind resistantExtended backWashing temperature 40°C 60°CColour Grey / Orange Grey / OrangeSizes S-XXL S-XXLProduct number 505 49 74-xx 525 81 26-xx

= Available

8

teChniCal

Forest jacket, technical.Perfect for the professional chainsaw user, this forest jacket is made of a ventilating material with 4-way stretch for high durability and freedom of movement. Open yoke for ventilation and a corduroy collar for extra comfort.

Jacket, Arbor 20. Especially developed for arborists, this comfortable jacket with saw protection is made of 100 % ultra polyester on the upper part and 80 % polyester with 20 % cotton on lower. A full-length zip fastening in front and an adjustable waist completes its design.

Easy adjustment of waist and bottom of the Technical jacket for greater comfort.

The Technical jacket is made in 4-way stretch material, giving extra movement in all directions.

The internal cuffs found on the Forest jacket, keep out moisture. While the external Cordura reinforcement protects lower sleeves against wear.

technical. Advanced protective clothing designed to match your work and the environment.Developed to meet the requirements of the most demanding fulltime users of forestry and garden power products. The Technical Series offers our most protective range of jackets that afford good chainsaw protection and allows the wearer to carry out daily work comfortably. Using advanced chainsaw protective material, the Technical trouser range has been designed to be lighter, stronger and more flexible. With extra features that make the difference when worn during long working days.

Waist trousers teChniCal 20 a

Waist trousers orange teChniCal 20 a

Carpenters trousers teChniCal 20 a

Waist trousers teChniCal 20 C

Safety requirements CE, Euro Tested, EN 381, Class 1, 20 m /s

CE, Euro Tested, EN 381, Class 1, 20 m /s

CE, Euro Tested, EN 381, Class 1, 20 m /s

CE, Euro Tested, EN 381, Class 1, 20 m /s

Protection style A A A CMaterial, front 4-way stretch material,

Aramid and Cordura4-way stretch material, Aramid and Cordura

4-way stretch material, Aramid and Cordura

4-way stretch material, Aramid and Cordura

Material, back 4-way stretch material and Cordura

4-way stretch material and Cordura

4-way stretch material and Cordura

4-way stretch material and Cordura

Reinforced area Over knee and lower part of leg Over knee and lower part of leg Over knee and lower part of leg Over knee and lower part of legElasticity High High High NormalBreathability Good Good Good NormalVentilation features Zips at back of legs

and mesh pockets Zips at back of legs and mesh pockets

Zips at back of legs and mesh pockets Pocket ventilation

Water resistantWind resistantExtended backWashing temperature 40°C 40°C 40°C 40°CColour Grey / Orange Orange Grey / Orange Grey / OrangeSizes S – XXL S – XXL S – XXL S – XXLProduct number 505 49 72-xx 523 07 82-xx 505 49 73-xx 505 53 58-xx

= Available

9

teChniCal

Knees are reinforced with Aramid for extra durability.

The trousers have ventilation pockets on the back of the thigh, and breathable mesh lining at the waist. (Not on model C.)

All Technical clothes feature durable 4-way stretch material for extra comfort in any situation.

Waist trousers with chainsaw protection, technical 20 A. Designed for the professional chainsaw user, these trousers are made to be lighter and more comfortable thanks to a spacious material in the rear. Additional features include wide elasticised waist and an extended back part. Available as waist and carpenter’s trousers. Waist trousers also available in orange.

Waist trousers with chainsaw protection, technical 20 c. These trousers are equipped with all-round chainsaw protection, model C. The overall design and materials is the same as the waist trousers Technical 20 A.

forest JaCKet funCtional

Safety requirements No standard neededMaterial, front 100 % micro polyesterMaterial, back 100 % micro polyesterReinforced area End of arms in CorduraBreathability NormalVentilation features Back of yoke and zips under arms with meshed interiorsWater resistantWind resistantExtended backWashing temperature 60°CColour Grey / OrangeSizes S-XLProduct number 504 10 24-xx

= Available

10

funCtional

Forest jacket, Functional.Protective forest jacket with front and upper part of back made of water repellent material. Four pockets in front, one with inside pocket for mobile phone. Arms have new cut for improved movement. Yoke with mesh lining for added ventilation, and corduroy collar for added comfort.

Internal cuff keeps out moisture. External Cordura reinforcement protects lower sleeves against wear.

Cordura is a durable synthetic material used in clothing for tough jobs in tough conditions.

Under the sleeves are ventilation pockets with zips.

Functional work wear for high levels of safety, balanced with durability.The Functional jacket is durable, lightweight and well-designed and gives good protection. For those who require functional, protective clothing which fit well and are designed for year round use. Our Functional trousers bring with them the necessary protection our users require for heavy working days. Featuring durable material they make the working day a little easier.

Waist trousers funCtional 24a

Waist trousers funCtional 20 a

Carpenters trousers funCtional 20 a

Safety requirements CE, Euro Tested, EN 381, Class 2, 24 m /s

CE, Euro Tested, EN 381, Class 1, 20 m /s

CE, Euro Tested, EN 381, Class 1, 20 m /s

Protection style A A AMaterial, front 4-way stretch material,

Aramid and Cordura Cordura Cordura

Material, back 100 % micro polyester and Cordura 100 % micro polyester and Cordura 100 % micro polyester and CorduraReinforced area Over knee and lower part of leg ― ―Elasticity Normal Normal NormalBreathability Normal Normal NormalVentilation features Ventilation at back pockets ― ―Water resistantWind resistantExtended backWashing temperature 40°C 60°C 60°CColour Grey / Orange Grey / Orange Grey / OrangeSizes S-XXL S-XXL S-XXLProduct number 505 53 57-xx 504 10 20-xx 504 10 22-xx

= Available ― = Not available

11

funCtional

Protection information label. Orange stripe stands for protection grade 24 m /s. Can be found on the rule pocket.

The trousers have two front pockets and one at the back. All with zips.

The Functional 24 trousers feature durable 4-way stretch material, and meet the requirements for 24 m /s.

Waist trousers with chainsaw protection, Functional 24 A. Waist trousers perfect for regular chainsaw users where extra safety is important to them. Front made of 4-way stretch, lower part of front and back part of leg made of Cordura nylon. Three pockets with zip fastening. Buttons for suspenders and rule pocket on right leg. Extended back part in orange for better visibility.

Waist trousers with chainsaw protection, Functional 20 A. Three pockets with zip fastening. Extended back part in orange for better visibility. Rule pocket on right leg. Carpenter’s trousers also available with five pocket feature.

Waist trousers ClassiC 20 a Chaps ClassiC 20 a

Safety requirements CE, Euro Tested, EN 381, Class 1, 20 m / s CE, Euro Tested, EN 381, Class 1, 20 m / sProtection style A AMaterial, front 100 % polyester 100 % PolyesterMaterial, back 100 % knitted polyester 100 % PolyesterReinforced area ― ―Elasticity Normal ―Breathability Very good GoodVentilation features High breathability from knitted polyester Open at backWater resistantWind resistantExtended back ― ―Washing temperature 60°C 60°CColour Grey GreySizes S – XXL One sizeProduct number 504 10 15-xx 504 10 18-01

= Available ― = Not available

12

ClassiC

Waist trousers with chainsaw protection, classic 20 A. Two front pockets, one back pocket and elastic waist. Buttons for suspenders and rule pocket on right leg.

chaps with chainsaw protection, classic 20 A. Perfect for the occasional chainsaw worker. Easy to wear and ideal for hot weather working. Full length zip fastening at back. Adjustable in height.

Tight woven fabric to front, while the back is made of breathable polyester knit for improved ventilation.

The chaps come in one size. The waist is height-adjustable and the widening band lets you increase the waist size.

Protective kit. Kit with the basic protective equipment needed when using a chainsaw. Includes chaps, helmet and gloves. 576 43 00-01

classic protective clothing that lives up to the safety you require.The Classic range offers an affordable range of durable protective clothing that breathes. All garments are designed to meet required safety standards and have additional features making them an ideal choice for demanding wearers.

13

proteCtive trousers, high visibility safety vest, high visibility

Safety requirements EN 381-5, EN 340 Class 1, 20 m /s, EN 471 Class 2 EN 471 Class 3Breathability Normal Very goodWater resistant ―Wind resistant ―Washing temperature 60°C 60°CColour High visibility orange High visibility orange / yellowSizes S – XXL L & XLProduct number 505 62 32-xx 505 62 31-xx

= Available ― = Not available

14

be seen be safe

Permanent reflective safety banding on vests and trousers increases your visibility in low lit or dense forest areas.

Safety vest, high visibility.Fluorescent orange / yellow vest, with 50 mm wide reflective strips. Class 3.

Protective trousers with saw protection, high visibility, Model A.Fluorescent orange trousers with braces, and two reflective strips around each leg. Class 2.

Class 3: The total fluorescent surface must be at least 0.8 m² and 0.2 m² reflectivity. Class 2: The total fluorescent surface must be at least 0.5 m² and 0.13 m² reflectivity. Class 1: The total fluorescent surface must be at least 0.14 m² and 0.1 m² reflectivity. No gap of more than 5 cm in the fluorescent surface or reflectivity may occur. This means that the zip fastening should be closed for example, on a jacket.

WorK JaCKet, brushCutting

WorK trousers, brushCutting

all-Weather JaCKet, typhone

all-Weather trousers, typhone

Safety requirements No safety requirements No safety requirements EN 343 EN 343Breathability Normal Normal Normal NormalVentilation features Yoke at back Zip to back of legs ― ―Water resistant Very good Very goodWind resistant Very good Very goodWashing temperature 40°C 40°C 40°C 40°CColour Blue Blue Grey / Orange GreySizes S – XXL S-XXL S – XXL S – XXLProduct number 505 62 40-xx 505 62 41-xx 523 07 57-xx 523 07 58-xx

= Available ― = Not available

15

ba

d

C

e

f

g

durable, Comfortable yet proteCtive

A. Work trousers, trimming and brushcutting.

Trousers for clearing and garden work. Mesh lining on the inside and zip at the back of the leg, for better ventilation. Two front and rear pockets and a thigh pocket with a flap. Right hip and both knees have extra pockets where thermoplastic pads can be inserted. B. Work jacket, trimming

and brushcutting.Waist-length jacket, specially designed for clearing and garden work. The four front pockets and the mobile phone pocket on the left sleeve have been designed so they don’t conflict with the harness. Pocket on the inside of the shoulders for thermo-plastic pads. Full-length zip at the front, high collar, cuffs with snaps. c. Knee pads.Knee pads in foam plastic to be used with the work trousers for trimming and brushcutting. In pairs, one size. 505 62 26-99 d. All-weather jacket, typhone.Made of strong, water-repellent, breathing material and lined with mesh. Designed with two zip fastened chest pockets, adjustable elastic in the waist and bottom of the back, and taped seams. The cuffs have zips and gussets. e. All-weather trousers, typhone.Made of strong, water-repellent and breathing material. Designed with two side vents, elasticated waist with drawstring and fly at front.

F. Husqvarna Active cleaning.Protective clothing must be washed regularly to retain their effectiveness. Phosphate free and biodegradable, it has been classified as environmentally compatible. Also effective for cleaning saw chains, garden machines, air filters, etc. 505 69 85-70 Available Autumn 2011.

g. Husqvarna braces.Extra wide braces with adjustable length. Available in two models, with leather straps (505 61 85-10) or strong metal clips (505 61 85-00).

rain JaCKet rain trousers rain JaCKet, garden

rain baCK proteCtor

rain Chaps rain Clearing trousers

Breathability Normal Normal Very good Normal Very good NormalVentilation features Yoke at back and front Mesh lining at waist ― Open front and

under arms Open around waist ―

Water resistant Very good Very good Very good Very good Very good Very goodWind resistant Very good Very good Normal Very good Very good Very goodWashing temperature 40°C 40°C 40°C 40°C 40°C 40°CColour Grey / Orange Grey Grey / Orange Grey / Orange Grey GreySizes S – XL S – XL M – XL One size One size One sizeProduct number 523 07 92-xx 523 08 05-xx 505 63 11-xx 505 63 16-10 505 63 26-10 505 63 36-10

― = Not available

16

a

C

d

e f

b

durable yet Comfortable rainWear

A. Rain trousers.Rain trousers made of a watertight stretchable material with sewn and welded seams. Zipper at the end of the legs, making it easier to wear the trouser over the boots. This model has 10 cm of mesh at the top for good ventilation and an elastic waist with a drawstring.

B. Rain jacket.Made of a watertight stretchable material with sewn and welded seams. Designed with a yoke on the chest, back and sleeves for good ventilation. Underneath the yoke is a heavy-duty mesh. The jacket has a corduroy collar with velcro fastening, extra long sleeves and an extended back with rain lip. The chest pocket and the long front zip are well protected with snaps. c. Rain jacket, garden.Rain jacket made of a watertight stretchable material with sewn and welded seams. This model is designed for garden professionals. It has an open waist with gusset and snaps so it can fit over the seat of a Rider or tractor. Designed with three practical pockets at the front. It’s long to protect the legs, and has a roomy hood so you can wear hearing protection underneath. d. Rain back protector with sleeves.Back protector with extra long back, sewn and welded seams, adjustable snap closure at the front, extra long sleeves with snaps and an extended back with a rain lip. e. Rain chaps.Chaps are designed to be attached to a belt or a tool belt. With adjustable buttoning to achieve three different lengths. F. Rain clearing trousers.Clearing trousers made of a watertight stretchable material with sewn and welded seams. They have adjustable elastic braces, a raised back and bib, and adjustable buttoning at the waist.

softshell JaCKet thermal vest

Breathability Normal NormalVentilation features Breathable material No armsWater resistant Very good GoodWind resistant Very good Very good Washing temperature 40°C 40°CColour Grey / Black / Orange Grey / Black / OrangeSizes S – XL M – XXLProduct number 577 25 30-xx 577 25 29-xx

17

C

e

d

b

a

proteCtion against the elements

A. Softshell jacket.Wind and water repellent, softshell jacket made of a comfortable and stretchy membrane with a soft fleece inner. Perfect for different kinds of weather. Wear it as a over other clothing or alone. Cordura reinforcement over shoulders, on back of arms, and on the sides. Arms are pre-curved for higher comfort and movement. Adjustable lower parts and Velcro fastenings on the end of the arms. Four pockets with zipper at front and two inside pockets. Available spring 2011.

B. thermal vest.Thermal vest made of 100 % water repellent polyester lined with fleece. Wear over jacket or sweater to keep both warm without reducing the movements in your arms. Four front pockets with zip fastenings. Back is extended and adjustable elastic at the waist and at the bottom of the back. Collar is high and closes tight. 505 61 20-xx Available spring 2011.

c. Micro fleece jacket / vest.Comfortable micro fleece jacket made of 100 % polyester fleece and 4-way stretch, that only absorbs 6 % moist. Full length zipper at front, one pocket on chest and two in front with zippers. Also available as a vest. Available autumn 2011.

d. Work shirt.A soft and comfortable shirt with good range of motion, equally good for work or leisure. 100 % pre-shrunk cotton. Sizes S – XXL. 544 14 06-xx e. one-layer underwear.Made of 100 % polyester interlock-knitted fabric and consists of both spun and textured polyester. This quality helps the fabric move moisture away from the skin to the next layer of clothing and provides for good ventilation, making your work comfortable every day. Sizes S – XL. Undershirt, 544 96 41-xx. Long underwear, 544 96 42-xx.

New! New!

New!New!

helmet funCtional helmet standard helmet arborist

Safety requirements, helmet EN 397/ ANSI Z89.1-2003 Class G,E EN 397/ ANSI Z89.1-2003 Class G EN 397/ ANSI Z89.1-1997 Class G,ESafety requirements, hearing protection EN 352-3 SNR = 26dB(A) /

ANSI S3.19-1974 NRR=24dB(A) EN 352-3 SNR=27dB(A) EN 352-3 SNR = 26dB(A) / ANSI S3.19-1974 NRR=24dB(A)

Safety requirements, visor EN 1731:2006 EN 1731:1997 EN 1731:1997Approved temperature – 40°C – 20°C – 40°CHarness 6-point textile 6-point plastic 6-point textileRigidityMolten metal ―Table for date marking ―Neck guard ―Helmet sun peak ShorterExtra sun peak ― ―VisorChin strap ― ―Hearing protectorsColour Flourescent or orange Orange OrangeProduct number 576 41 24-01 flourescent /

576 41 24-02 orange 505 66 56-00 505 67 53-25

= Available ― = Not available

18

proteCt your head

Unique folding design that enables ear protection to be easily fixed in three different positions. They can also be adjusted laterally.

Visor provides good visibility and good water run-off. Reinforced visor holder, which makes the helmet more stable.

Compared to a standard visor, the light reduction of the UltraVision visor is only 20 % over the whole mesh area.

Forest helmet, Functional.This new helmet is made for forestry workers seeking the best combination of safety and optimal ergonomics in daily work. It has the new UltraVision visor with 20 % light reduction giving a clearer view and a 6-point harness for comfort and less pressure. Hearing protection with optimal ergonomic design facilitates prolonged use. Best choice in respect of comfort and individual preferences. Available Spring 2011.

New!

Protective helmet, standard.Helmet completely equipped for forestry or garden work with a six-point harness with supporting plastic bands. The hearing protectors are developed for optimal ergonomics. Metal mesh visor that provides good protection and good visibility. Not available in UK/Ireland.

proteCtive glasses, yelloW X

proteCtive glasses, Clear X

proteCtive glasses, sun X

proteCtive glasses, Clear

proteCtive glasses, sun

proteCtive glasses, goggles

Safety requirements EN 166 EN 166 EN 166 EN 166 EN 166 EN 166Colour Yellow tinted ― Grey tinted ― Grey tinted ―Lenses Scratch resistant Scratch resistant Scratch resistant Scratch resistant Scratch resistant ―Lenses angled ― ― ―Frames Extendable Extendable Extendable Static Static Soft inside stretch

neckbandUV-protection ― ― ― ―Anti-fog ― ― ― ― ―Product number 544 96 37-02 544 96 37-01 544 96 37-03 544 96 38-01 544 96 38-02 544 96 39-01

= Available ― = Not available

19

Mesh visor, metal.Fits all our helmets and hearing protectors. 505 66 53-21

Mesh visor, nylon.Fits all our helmets and hearing protectors. 505 66 53-19

Perspex visor.For all our helmets and hearing protectors. 505 66 53-43

Anti-fog visor.Made of polycarbonate with special treatment to prevent misting on the inside. Non-scratch outside. For all our helmets and hearing protectors. 505 66 53-63

UltraVision visor.Light reduction is only 20 % over the whole mesh area. Less sensitive for water to stick on the mesh. Less sensitive for permanent deformation. 574 61 35-01

proteCtion for the eyes

Protective glasses.Glasses can be worn with a visor or on their own depending on the work you are performing. Yellow tinted lenses give improved vision in dark conditions. Grey tinted lenses with UV protection improve vision in sunny conditions. Goggles, developed for people who wear eyeglasses, are anti-fog treated and are durable against impact, dust and airborne particles as well as chemical splash.

We recommend wearing protective glasses under mesh as well as perspex visors, to increase safety and reduce the risk of flying debris causing injury.

Extendable, flexible frame that can be angled and fitted for even greater comfort during extended wear.

hearing proteCtion

With bluetooth and radio

hearing proteCtion

hearing proteCtion

gardener

hearing proteCtion

gardener With visor

hearing proteCtion

With perspeX visor

hearing proteCtion With mesh

visor

Safety requirements EN 352-1 EN 352-1 / EN 352-3 EN 352-1 EN 352-1 /

EN 166EN 352-1 /

EN 166EN 352-1 / EN 1731

Headband Padded Padded Extra wide, no padding

Extra wide, no padding Protection cap Protection cap

Visor ― ― ― Perspex Perspex MeshAttenuation value SNR=24 dB SNR=27 dB SNR=25 dB SNR=25 dB SNR=27 dB SNR=27 dBProduct number, headband 505 66 53-70 505 66 53-04 505 69 90-12 505 66 53-60 505 66 53-48 505 66 53-58Product number, helmet based 575 86 74-01 505 66 53-25 ― ― ― ―

= Available ― = Not available

20

Hearing protection with bluetooth and radio.Comfortable hearing protectors designed to give 20 % adjustment of pressure against the head. Provides protection needed plus the possibility to connect your mobile phone or listen to music from FM radio or an external device such as an MP3 player. Answer your incoming calls by simply touching the “talk button” on the hearing protectors. Makes work easier and safer.

Hearing protection with perspex or mesh visor.Comfortable hearing protectors where you can adjust the pressure by 20 %. Ideal for clearing grass and trimming. Features a cover between the visor and headband protecting your head from grass and rain. Always use in combination with protective glasses. Can also be fitted with a sun peak.

Helmet mounted hearing protection with Bluetooth and FM radio gives optimal protection plus the possibility to get notice of and answer incoming phone calls or listen to favorite music.

All features are controlled by three distinctive buttons which makes operating even easier.*

Wireless communication enables increased safety.*

Hearing protection with headband.Hearing protection where you can adjust the pressure by 20 %. With soft, airy padding in the headband. The design of the ear covers are the same as for our helmets.

Hearing protection, gardener with or without Perspex visor.A more basic model with an extra wide headband without padding, which means a secure, comfortable fit and reduced pressure on the head. Also available with a visor.

proteCt your hearing

* Feature for the hearing protection with bluetooth and radio.

Comfort gloves, saW proteCtion

Comfort gloves

Comfort gloves,

Winter *

Comfort mittens,

trigger finger and saW

proteCtion

Comfort mittens, trigger finger*

spandeX gloves*

gloves, arbor 16

husqvarna garden- gloves

gloves, garden

pro

Requirements EN 381-4, -7, EN 420:1, EN 388, class 0, 16 m /s

EN 420:1992, category 1

EN 420:1992, category 1

EN 381-4, -7, EN 420:1, EN 388,

class 0, 16 m /s

EN 420:1992, category 1

EN 420:1992, category 1

EN 381-4, -7, EN 420:1, EN 388, class 0,

16 m /s

EN 420:1992, category 1

EN 420:1992, category 1

Saw protection ― ― ― ― ― ―Water repellent goat skin, palmWater repellent nylon, backCuff Elastic Elastic ― Elastic ― ― ― ― ―Velcro fastening ― ― ―Size 7 – 12 7 – 12 10 – 12 7–12 8 –12 8 –12 9 – 10 One size 6 – 10Product number 505 64 20-xx 505 64 20-xx 505 64 24-xx 505 64 16-xx 505 64 18-xx 505 64 25-xx 505 64 03-09 505 64 23-10 505 65 01-xx

= Available ― = Not available * Not available in UK

21

hands-on proteCtion

gloves, garden Pro.Comfortable garden gloves. Made of water-repellent kid leather, with an elastic material back. Reinforced fingers. Velcro closure around the wrist.

comfort gloves, five finger with saw protection.Form-fitting gloves with reinforced palm. Exposed parts are reinforced with leather. With waterproofed kid leather on the inside and a water-repellent polyester fabric on the back. Also available without saw protection. comfort gloves, winter.Shaped and reinforced palm. Exposed areas are seamless and reinforced with leather. Not available in UK/Ireland.

comfort mittens, trigger finger and saw protection.Form-fitting with reinforced palm. Exposed parts are reinforced with leather. With waterproofed kid leather on the inside and a water-repellent polyester fabric on the back.

comfort mittens, trigger finger.Waterproof kid leather palm and hard-wearing, water-repellent polyester back. Not available in UK/Ireland.

Spandex gloves, five finger.Gloves with a Spandex back: a water-repellent, stretchy material. Good fit, leather lined on the inside. Not available in UK/Ireland.

gloves, Arbor 16.Gloves developed especially for tree climbers. Improved grip when using a rope.

Husqvarna gardengloves.With a reinforced leather thumb. Palm of heavy-duty leather, back of polyester for improved comfort.

Trigger finger style gloves are designed to help hands stay warm while at the same time being able to work with chainsaws and other power products efficiently.

Five finger gloves give good all round protection. They allow for good movement and control while offering chainsaw protection in the left hand glove.

proteCtive boots funCtional 28

proteCtive boots funCtional 24

leather boots With saW proteCtion, teChniCal 24

leather boots With saW proteCtion 20

proteCtive boots, teChniCal

Safety requirements EN 345 SB E, EN 381-3 Class 3, 28 m / s. EN 345 SB E, EN 381-3 Class 2, 24 m / s. EN ISO 20344, 20345, 13287 and 17249. SB, E, WRU, SRA, Class 2, 24 m / s. EN 345-2, S2, EN 381-3 Class 1, 20 m / s. EN ISO 20345, SB, SRA WRU

Saw protection ―Material, outer Natural rubber Natural rubber Split suede leather Polyurethane leather Water repellent nylon

and genuine leatherMaterial, inner Canvas lining Canvas lining Breathable, waterproofed Sympatex lining Cambrelle lining Breathable, waterproofed Sympatex liningSteel toecap Composite toecapWater resistant Over steel toe, heel and sides Over steel toe, heel and sidesReinforcement At front Over Steel toe and heel Front of toe and extra paddingLasingColour Grey / Orange Grey / Orange Grey / Orange Black Grey / OrangeSizes 37 – 47 37 – 47 36 – 47 39 – 47 36 – 47Product number 573 95 59-xx 573 95 58-xx 574 62 52-xx 544 96 48-xx 575 35 47-xx

= Available ― = Not available

22

Protective boots, Functional 24.Protective boots that will keep feet dry, safe and ready for work day after day. Features include steel toecap, saw protection, ankle protection, heel ridges and non-slip and stud-ready sole. These boots are developed and tested in close co-operation with professional users.

Studs.Studs including studs key. 35 pcs, 505 65 43-61.

Shoe / boot dryer.Easy and quick drying of all types of footwear, without making the leather hard and brittle. 1.1 meters cable, 4 + 4 W/ 230 V. CE approved. 544 96 40-01 Not available in UK/Ireland.

sure footing in tough Conditions

Protective boots Functional 24 and 28 have extra-reinforcing around the sole. Also features stud-ready soles.

Protective boots, Functional 28.Handmade boots with saw protection, extra-reinforced upper with steel toecap and reinforcing around the stud-ready sole. Deep rear lacing, gripping points on the leg and ridges on the leg, a heel cap make it easier to put on and take off the boot. Canvas lining. Sole can be fitted with studs.

Uniquely designed gripping points enables the wearer to remove the boots more easily even after a heavy working day.

proteCtive boots funCtional 28

proteCtive boots funCtional 24

leather boots With saW proteCtion, teChniCal 24

leather boots With saW proteCtion 20

proteCtive boots, teChniCal

Safety requirements EN 345 SB E, EN 381-3 Class 3, 28 m / s. EN 345 SB E, EN 381-3 Class 2, 24 m / s. EN ISO 20344, 20345, 13287 and 17249. SB, E, WRU, SRA, Class 2, 24 m / s. EN 345-2, S2, EN 381-3 Class 1, 20 m / s. EN ISO 20345, SB, SRA WRU

Saw protection ―Material, outer Natural rubber Natural rubber Split suede leather Polyurethane leather Water repellent nylon

and genuine leatherMaterial, inner Canvas lining Canvas lining Breathable, waterproofed Sympatex lining Cambrelle lining Breathable, waterproofed Sympatex liningSteel toecap Composite toecapWater resistant Over steel toe, heel and sides Over steel toe, heel and sidesReinforcement At front Over Steel toe and heel Front of toe and extra paddingLasingColour Grey / Orange Grey / Orange Grey / Orange Black Grey / OrangeSizes 37 – 47 37 – 47 36 – 47 39 – 47 36 – 47Product number 573 95 59-xx 573 95 58-xx 574 62 52-xx 544 96 48-xx 575 35 47-xx

= Available ― = Not available

23

Protective boots, technical.High quality water proof leather /nylon mesh. Sympatex membrane makes the boots 100 % waterproof. Front part of shoe offers extra rubber protection. Pull strap at back and on tongue. Quick adjustment system. Low weight.

outlast sock.Comfortable socks in Outlast material that keeps you cool when it’s warm and warm when it’s cool. Sizes 37 – 48. 544 14 35-xx

Husqvarna sock.An inner sock that uses a capillary action to absorb and draw away moisture. Sizes 37 – 48. 505 61 60-xx

leather boots with saw protection, technical 24.New to our range, these high quality water proof leather boots offer chainsaw protection in Class 2, 24 m /s. The Sympatex membrane makes these boots 100 % waterproof yet still breathable between the liner and outer fabric. Easy adjustable with hooks, quick lock at the top and 5 hooks for quick adjustment. Extra hook at front of tongue for better position of tongue when walking. Lower part of boot from sole and up is reinforced with rubber as extra protection. Pull strap at back.

quality leather foot proteCtion

Moulded treads ideal for working on rough terrain.

High quality metal eyelets and rivets with sturdy lace fastening, adds further durability.

The Gravity® sole is oil resistant and gives the perfect grip. These boots are suitable for forest and garden work as well as leisure, in all weather conditions.

leather boots with saw protection, technical 20.Improved design for better durability, greater comfort and stability. These leather boot offer good stability and fit. Made of polyurethane treated leather. Seams of heavy-duty Kevlar thread for significantly increased strength. Durable and waterproof polyurethane sole extends up to the upper part of the boot. Inner sole of shock- absorbent Ergothan prevents stress injuries.

harness balanCe Xt™

harness balanCe fleX™

harness balanCe X™

harness balanCe 55

harness balanCe 35

harness standard

Waist belt ― ― ― ―Padded shoulders ―Hip pads Padded ― Padded Shock absorbing Plain PlainFloating pad system ― ―Grass / forest position ― ―Back Plate (sdjustable) ― ― ― ― ―Pivoting shoulders ― ― ― ― ―Product number 505 20 42-01 505 20 43-01 504 04 52-01 537 27 57-01 537 27 57-02 537 21 63-01

= Available ― = Not available

24

ergonomiC adJustable harnesses

Harness Balance Xt™.The Balance XT™ harness distributes the load across a large area. This gives excellent weight distribution between the shoulders, between the shoulders and chest and between the hip and shoulders. In addition, Balance XT™ has many other features for added comfort. Wide padded and body hugging shoulder straps and waist belt make the harness comfortable to wear during long working days.

Harness Balance Flex™.To be used with all kind of pole products. The product is attached to the harness by open hooks, making it easy to use and quick to start and stop. A lifting force is used to help hold and lift the product and can be locked in any position. The harness gives good support when using pole products for different kind of work, high or low, far away or close, which results in better ergonomics.

Adjustable chest plate. Lower position transfers weight from the shoulders to the hips and reduces pressure over the chest, making it ideal for women.*

The Balance Flex™ has enhanced lifting force. Ergonomically designed, it attaches with open hooks making it easier for the user.

Body shaped backplate for support. Can be adjusted in three positions to fit different body sizes.*

Shoulder straps follow the movements of the shoulders and gives an improved weight distribution.*

* Feature for the Balance XT™ harness only.

25

ergonomiC adJustable harnesses

Travelling connection for grass or forest position.

Quick safety release for disconnecting the machine.

for more information, visit our website. you’ll find comparison charts, videos, web page as well as further information on which harness come with which product . there’s also additional advice to help you decide which brushcutter is right for the job you have in mind. www.husqvarna.com/ie

Harness Balance X™.The Balance X™ harness distributes the load across a large area for added comfort. This reduces strain and gives weight distribution between the shoulders, between the shoulders and chest and between the hip and shoulders. tool bag for Balance X™.Practical bag to be placed on your harness. 537 30 66-01 Available Autumn 2011.

Harness Balance 55 and 35.An ergonomic harness that distributes their load optimally between shoulders, chest and back. The Balance 35 has a plain hip pad, and the Balance 55 has a shock absorbing hip pad. The hip pads have travelling connections so that the machine can be manoeuvred with a minimum of body movements, further saving the user’s back.

Harness Standard.Designed for lighter brushcutters. Adjustable, padded shoulder straps. Simple and effective quick release on chest.

26

Files and filing gauges.Keep chains trim with one of the Husqvarna files and a file gauges. Designed to sharpen the cutters and ensure good cutting action, they are essential for ensuring a correctly sharpened chain that will help to make work easier and safer. Husqvarna patented file handles, are specially designed with a locking system that ensures correct file angling.

trimmer heads.Efficient, trimmer heads meet the needs of our most demanding users. Choose a trimmer head for heavy terrain to light garden work. Every trimmer head has been developed with a particular application in mind.

Bars and chains.The gentle curve and small nose radius reduce the risk of kickback and facilitate good cutting control. For work on hardwoods, hard bark or sandy environments, solid bars with hard nose are recommended. Follow the bar and chain guides to ensure you have the correct chain for your Husqvarna chainsaw.

special filing gauges. facilitates correct angle for the most effective sharpening.

semi-automatic trimmer heads. simply tap ’n go.

a wide range of bars. With husqvarna you’ll find what you need.

27

bars, Chains, files and gauges

Blades and knives.By combining high quality materials and basing development on the demands of our users, we are able to deliver blades for everything from forestry clearing to grass blades and grass knives for work in heavy grass.

original parts.New original Husqvarna parts are constantly being developed using new materials and the latest production techniques. We want you to experience only the best when you work with our equipment.

trimmer lines.Trimmer lines with long range and long life. Our trimmer lines feature different lengths and shapes depending on the requirements of the job. They have been developed using unique materials and production techniques which gives them the best possible performance.

an extensive range of cutting accessories. puts you in full control.

trimmer line Whisper.reduces noise levels by 50 %.

low vibration chains. gives better comfort and lessens fatigue.

28

a

C

b

d

New!

A. laminated bars with nose wheel.The gentle curve and small nose radius of the laminated bars with nose wheel reduce the risk of kickback and facilitate good cutting control. The bars are coated to protect against scratches and corrosion. Available in 3/8" Mini, .325", and 3/8" Pitch in length 10 – 20". Also available in TechLite™, for use with the Husqvarna T540XP.

B. techlite™ – laminated bars with replaceable tip.Compared to our regular solid bars, the TechLite™ bar is up to 25% lighter and has almost 25% better rigidity, by using technology from the aerospace and racing industries. Less strain and increased efficiency are obvious and important benefits. Available in lengths 20" and 28". Available Autumn 2011.

c. Solid bars with replaceable tip.Recommended for use with long bars to reduce load on the bar tip. The load is transfered to the high quality roller bearing. Frictional loss is reduced by 8–10 % depending on the bar length compared with solid bars with hard nose. The bars are coated to protect against scratches and corrosion. Replaceable tip is available as a spare part. Available with 3/8" chain pitch in lengths 18 – 28".

d. Solid bars.Solid bars are used for hard species of timber, thick bark and in very sandy, dusty or sooty conditions. The bars are coated to protect against scratches and corrosion. Available in lengths 24 – 42".

Bars and chains for a safer, more efficient cut.Genuine Husqvarna equipment and chainsaw accessories are built to the same high standards as our saws themselves. By combining high-quality materials and basing development on the demands of forestry professionals, we are able to offer a wide range of guide bars, chains and files that delivers maximum efficiency and safety when added to any chainsaw.

bars, Chains and filing

Also available: Replaceable nose sprockets for your bars and replaceable sprocket nose bearing and rivets for all our laminated bars.

Chamfer Chisel chain.

Micro Chisel chain.

Chipper chain. Semi-Chisel chain.

Chisel chain.

Gauge. Pitch.

Using different chains.Husqvarna offers a wide range of chains for different needs. Find more information and chains on our website.

1 / 4" Pitch chains, recommended up to 38 cc.Extremely lightweight chain for smooth clean cuts. Fitted with Micro Chisel cutters.

Mini 3 / 8" Pitch chains, recommended up to 45 cc.Low-vibration chain with Chamfer Chisel cutters. For woodcutters who use smaller-size saws in high-production environment. Also available in low kickback version.

Pixel .325" Pitch chains, recommended for 35 – 55 cc.Chain developed to meet the specific needs of today’s lightweight chainsaws. Cuts narrow kerf which requires less power from the saws than standard cutting systems. Low kickback and low-vibration features with Micro Chisel cutters. Not recommended for heavy duty work e.g storm damages forest.

.325" Pitch chains, recommended for 35 – 60 cc.High-performance, low-vibration chain with Micro Chisel cutters. Ideal for demanding conditions.

3 / 8" Pitch chains, recommended for 50 – 100 cc.Professional chains available in Semi-Chisel and Chisel cutters. Chisel cutters for high-production cutting of clean wood. Semi-Chisel cutters for fast cutting and easy sharpening. The Chisel cutter is available in low-vibration version, and also as a square ground for professional use.

.404" Pitch chains, recommended for 85 cc and larger.A big-timber chain designed for the professional users available in three variants: Chisel cutters, ideal for users who need high production and cut clean wood with larger-size chain saws. Micro Chisel cutters for fast cutting end easy sharpening. Fully rounded Chipper variant for exelent performance, easy sharpening and edge-holding durability.

Special chains.Chains with special factory grind for making dimensional boards and planks from larger timbers by cutting parallel to the wood grain.

Bar and chain kit.Kit containing one bar with small bar mount and two chains. 13" .325, 531 00 38-13. 15" .325, 531 00 38-17. 13" Pixel, 531 00 38-93. 15" Pixel, 531 00 38-92.

Micro Chisel chain.

Chipper chain. Semi-Chisel chain.

Chisel chain.

Gauge. Pitch.

small bar mounting point large bar mounting point

t42

5

327p

4 / 3

27p

5X / 3

27p

t5s

t43

5 / 3

34t

338

Xp

® t

/ t54

0 X

p®

317

ele

ctri

c / 3

21 e

lect

ric

240

e-se

ries

236

e-se

ries

339

Xp

®

435

e-se

ries

/ 435

/ 440

e-s

erie

s

450

e-se

ries

/ 445

/ 445

e-s

erie

s

353

/ 346

Xp

®

55 / 4

55 r

anch

er / 4

55 e

-ser

ies

ran

cher

460

ran

cher

/ 357

Xp

® / 3

59

365

/ 372

Xp

®

570

/ 576

Xp

®

385

Xp

®

390

Xp

® * /

395

Xp

®

3120

Xp

®

bar length inches /cm

Chain pitch inches

gauge inches /cm

product number

drive links type product number

laminated bar With nose Wheel

10 / 25 3 / 8 .050 / 1.3 505 89 16-40 40 H36 LowVib 501 84 21-40

12 / 30 3 / 8 .043 / 1.1 501 95 95-45 45 90SG 501 84 23-45

12 / 30 3 / 8 .050 / 1.3 501 95 92-45 45 H36 LowVib 501 84 21-45

14 / 36 3 / 8 .050 / 1.3 501 95 92-52 52 H36 LowVib 501 84 21-52

16 / 40 3 / 8 .050 / 1.3 501 95 92-56 56 H36 LowVib 501 84 21-56

13 / 33 .325 .050 / 1.3 508 92 61-56 56 H30 LowVib 501 84 06-56

15 / 38 .325 .050 / 1.3 508 92 61-64 64 H30 LowVib 501 84 06-64

16 / 40 .325 .050 / 1.3 508 92 61-66 66 H30 LowVib 501 84 06-66

18 / 45 .325 .050 / 1.3 508 92 61-72 72 H30 LowVib 501 84 06-72

20 / 50 .325 .050 / 1.3 508 92 61-80 80 H30 LowVib 501 84 06-80

13 / 33 .325 .058 / 1.5 508 91 21-56 56 H25 LowVib 501 84 04-56

15 / 38 .325 .058 / 1.5 508 91 21-64 64 H25 LowVib 501 84 04-64

16 / 40 .325 .058 / 1.5 508 91 21-66 66 H25 LowVib 501 84 04-66

18 / 45 .325 .058 / 1.5 508 91 21-72 72 H25 LowVib 501 84 04-72

20 / 50 .325 .058 / 1.5 508 91 21-80 80 H25 LowVib 501 84 04-80

15 / 38 3 / 8 .058 / 1.5 508 91 41-56 56 H42 LowVib 501 84 14-56

16 / 40 3 / 8 .058 / 1.5 508 91 41-60 60 H42 LowVib 501 84 14-60

18 / 45 3 / 8 .058 / 1.5 508 91 41-68 68 H42 LowVib 501 84 14-68

20 / 50 3 / 8 .058 / 1.5 510 15 35-72 72 H42 LowVib 501 84 14-72

15 / 38 3 / 8 .058 / 1.5 508 91 31-56 56 H42 LowVib 501 84 14-56

16 / 40 3 / 8 .058 / 1.5 508 91 31-60 60 H42 LowVib 501 84 14-60

18 / 45 3 / 8 .058 / 1.5 508 91 31-68 68 H42 LowVib 501 84 14-68

20 / 50 3 / 8 .058 / 1.5 544 28 55-72 72 H42 LowVib 501 84 14-72

laminated bar With nose Wheel, teChlite™

12 / 30 3 / 8 .050 / 1.3 576 83 07-45 93 H37 LowVib 576 93 65-45

14 / 36 3 / 8 .050 / 1.3 576 83 07-52 93 H37 LowVib 576 93 65-52

16 / 36 3 / 8 .050 / 1.3 576 93 65-56 93 H37 LowVib 576 93 65-56

laminated bar With replaCeable tip, teChlite™

20 / 50 3 / 8 .058 / 1.5 544 90 25-72 72 H42 LowVib 501 84 14-72

28 / 72 3 / 8 .058/1.5 544 90 25-92 92 H42 LowVib 501 84 14-92

solid bar With replaCeable tip

18 / 45 3 / 8 .058 / 1.5 501 95 77-68 68 H42 LowVib 501 84 14-68

20 / 50 3 / 8 .058 / 1.5 501 95 77-72 72 H42 LowVib 501 84 14-72

18 / 45 3 / 8 .058 / 1.5 501 95 69-68 68 H42 LowVib 501 84 14-68

20 / 50 3 / 8 .058 / 1.5 501 95 69-72 72 H42 LowVib 501 84 14-72

24 / 60 3 / 8 .058 / 1.5 501 95 69-84 84 H42 LowVib 501 84 14-84

28 / 72 3 / 8 .058 / 1.5 501 95 69-92 92 H42 LowVib 501 84 14-92

solid bar

10 / 25 1 / 4 .050 / 1.3 505 89 15-60 60 H00 501 84 40-60

18 / 45 3 / 8 .058 / 1.5 501 95 80-68 68 H42 LowVib 501 84 14-68

20 / 50 3 / 8 .058 / 1.5 501 95 80-72 72 H42 LowVib 501 84 14-72

24 / 60 3 / 8 .058 / 1.5 501 95 80-84 84 H42 LowVib 501 84 14-84

28 / 72 3 / 8 .058 / 1.5 501 95 80-92 92 H42 LowVib 501 84 14-92

24 / 60 .404 .063 / 1.6 507 47 60-46 76 H64 501 84 31-76

28 / 72 .404 .063 / 1.6 501 58 96-01 84 H64 501 84 31-84

30 / 75 .404 .063 / 1.6 501 95 81-92 92 H64 501 84 31-92

36 / 90 .404 .063 / 1.6 501 95 81-04 104 H64 501 84 31-04

42 / 105 .404 .063 / 1.6 501 92 18-24 124 H64 501 84 31-24

* Solid bar with .404 chain pitch on 390 XP ® is optional on certain markets.

29

reCommendation guide

filing equipment produCt number

filing equipment produCt number

Intensive Cut 4.0 mm, 2 pcs 510 09 57-01 File gauge, .325" H25 505 69 81-10Intensive Cut 4.5 mm, 2 pcs 577 23 37-01 File gauge, 3 / 8" MINI 505 24 37-01Intensive Cut 4.8 mm, 2 pcs 510 09 55-01 File gauge, .404" H64 505 69 81-15Intensive Cut 4.8 mm, 12 pcs 510 09 55-02 File gauge 1/4" H00 505 69 81-18Intensive Cut 5.2 mm, 12 pcs 577 23 38-01 Depth gauge, .325" 505 69 81-00Intensive Cut 5.5 mm, 2 pcs 510 09 56-01 Depth gauge, 3 / 8" 505 69 81-01Intensive Cut 5.5 mm, 12 pcs 510 09 56-02 Depth gauge, .404" 505 69 81-02Round files, Ø 4.0 mm, 2 pcs 544 03 69-40 Depth gauge, 3 / 8" MINI 505 69 81-03Round files, Ø 4.0 mm, 12 pcs 505 69 81-41 Combination gauge, .325" / 1.3" PIXEL H30 505 69 81-08Round files, Ø 4.5 mm, 2 pcs 544 03 69-45 Combination gauge, .325" / 1.5" H25 505 69 81-09Round files, Ø 4.8 mm, 2 pcs 544 03 69-48 Combination gauge, 3 / 8" H42 505 24 35-01Round files, Ø 4.8 mm, 12 pcs 505 69 81-49 Combination gauge Semichisel 3 / 8" H51, H54, H58* 575 99 15-01Round files, Ø 5.2 mm, 12 pcs 505 69 81-52 Stump vise 505 66 52-56Round files, Ø 5.5 mm, 2 pcs 544 03 69-55 File handle, Ø 4.5 – 5.5 mm 505 69 78-01Round files, Ø 5.5 mm, 12 pcs 505 69 81-56 File handle, flat files 505 69 78-10Flat files, 6", 1 pcs 505 69 81-60 File kit .325" 505 69 81-25Flat files, 6", 12 pcs 505 69 81-61 File kit .325" PIXEL 505 69 81-27Flat files, 8", 1 pcs 505 69 81-80 File kit 3 / 8" 505 69 81-30Flat files, 8", 12 pcs 505 69 81-81 File kit 3 / 8" MINI 505 69 81-38

File kit .404" 505 69 81-92

30

filing teChniques

A sharp chain is just as important as a powerful engine.For your chainsaw to operate effectively, safely and with precision it is vital to have a sharp chain. How often it needs to be sharpened depends of course on how frequently you use it. A good indication of the condition of your chain is the appearance of the wood chips. A sharp chain will produce fine even wood chips while a dull chain generates sawdust.

Filing equipment.You’ll need a round file, a flat file and a filing gauge to file a chain. Husqvarna has developed a unique combination gauge that includes a file gauge and a depth gauge setter in the same tool. Used together with the round file and flat files it ensures the correct filing angle. We also recommend that you use a vise to hold the bar, leaving both hands free for filing. File kits are available.

2. File the depth gauges.Place the depth gauge tool on the chain and use the flat file to file the depth gauge all the way down. If you file the depth gauge without a tool you risk filing them too far down. The chain will then produce too thick chips. This will increase vibration, poor precision and could increase the risk of kickback.

1. File the cutting teeth.Place the file gauge on the chain. You’ll see arrows which should be pointing in the same direction as the chain rotates. File using light and even pressure with gentle, pushing strokes parallel to the gauge.File down to get a fresh cutter edge. Try to get the same length of all cutters. File every other tooth from the right and every other tooth from the left. A good method is to file from one direction then turn the saw and continue working in the other direction.

*Not available in UK/Ireland.

31

a b

C

d

f

e

g

filing and filing gauges

Husqvarna Intensive cut.New upgraded design with 20 % better cutting performance and longer lifetime. To keep your chain trim you will need a round file and a file gauge to sharpen the cutters. With a correctly sharpened chain your work will be easier and safer.

We compare the number of strokes and the amount of material removed from the cutter with each stroke. By doing this we are able to ascertain that Husqvarna files remove more material with fewer strokes when compared to its main competitor.

A. Husqvarna round and flat files.Quality files which give you the right geometry of the cutter.

B. File handle.Patented file locking system. Fits all our files. 25° and 30° guides ensures correct file angling.

c. File gauges.Specially designed file gauges that give the correct filing angles, use together with our round files.

d. depth gauge tool.Specially designed depth gauges that give the correct filing angles, use together with our flat files.

e. combination gauges.Our combination gauges are specially designed with a file gauge and depth gauge setter to put together in one tool. Use together with our round and flat files for a correct filing angle.

F. Stump vise.To fasten the chainsaw in a secure position when filing. Made of forged steel.

g. chainsaw maintenance kits.The chainsaw maintenance kits includes fuel filter, sparkplug and airfilter. Husqvarna 340/340e /345/345e /350 and 346 XP/353, 510 27 62-01. Husqvarna 346 XP/353, 510 27 63-01.

Number of strokes

Main competitorHusqvarna Intensive Cut

coMPARISIoN RoUNd FIleSA

ccum

ulat

ed w

eigh

t re

duct

ion

on c

utte

r (g

)

trimmer head produCt number

suitable line dimensions (mm)

fully-automatiC trimmer headTrimmy Superauto II 531 00 60-93 2.4Trimmy Auto 55 531 00 92-26 2.7 – 3.3semi-automatiC trimmer headT25 C 531 00 92-61 2.0 – 2.4T25 3/8" 531 00 92-78 2.0 – 2.4T25 M10 531 00 92-79 2.0 – 2.4T35 M10 531 00 92-25 2.4 – 2.7T35 M12 531 00 92-69 2.4 – 2.7T35 X M10 544 90 90-01 2.4 – 2.7T35 X M12 544 90 90-02 2.4 – 2.7T45 X M12 531 00 92-62 2.7 – 3.3T55 X M12 544 90 91-01 3.0 – 4.0manual trimmer headS35 M10 531 00 92-24 2.4 – 2.7S35 M12 531 00 92-68 2.4 – 2.7Trimmy SII 502 26 08-15 2.0 – 3.3pre-Cut trimmer headF35 504 04 48-01 2.0 – 3.5F55 504 04 49-01 2.0 – 3.5Alloy 575 98 98-01 2.0 – 3.3tri-Cut trimmer headTri-Cut M10 525 46 07-01 –Tri-Cut M12 525 46 08-01 –

32

trimmer heads, lines and blades

Increase performance with the optimal choice of blade or trimmer head.Our trimmer heads, trimmer lines and blades are designed to do much more than simply cut. Outstanding design, quality materials and facilitating technology mean they offer optimal levels of performance, efficiency and safety. Furthermore, our range has now been complimented with new products that take cutting into new territory.

grass knives.255 / 3t, 275 / 4t, 300 / 3t, 350 / 3t, 230 / 2t For dense, coarse grass, but not for woody growth. Available with 4, 3 or 2 teeth.

grass blades.225 / 8t, 225 / 4t, 200 / 4t For dense, coarse grass, but not for woody growth. Grass falls onto the blade for neat rows. Available with 4 or 8 teeth.

Saw blades.scarlett 200 / 22t, 225 / 24t Developed in close collaboration with professional clearing saw workers. It delivers a winning combination of maximum cutting capacity and low vibration levels. Available with 22 or 24 teeth.

maxi 200 / 22t, 200 / 26t, 225 / 22t Available with 22 or 26 teeth.

Semi-automatic trimmer heads, 25 – 55 cc.With Tap’n go function. These trimmer heads are fed automatically when the head is pushed into the ground which puts the user in total control. X variants are constructed for longer working life due to a tap’n go button with ball bearing. T35 Universal has the same characteristics as the standard T35 but includes adapters that allows it to be attached to most other machines.

Manual trimmer heads, 25 – 55 cc.These lines are fed manually by the user by pushing the line feed button and pulling the cord. This enables the user to select the length of line to achieve the desired effect.

Fully-automatic trimmer heads, 25 – 55 cc.Trimmer heads with fully automatic line feed. Line is fed automatically when it has become to short for productive use. The line length is self-adjusting to ensure that the best performance is achieved.

tri-cut trimmer head.Trimmer head with a distinct design and plastic knives instead of trimmer line. It is ideal for use in coarser grass and terrain with stones. It also features highly visible, replaceable plastic flails, which are safe for use around trees and bushes.

Pre-cut trimmer head.Trimmer heads that are easy to use and have a quick and easy line feeding needing minimal maintenance. The line is loaded without opening the head. Any trimmer line from Husqvarna’s range can be used. The head is universal, fitting most other brands and can be used on a wide range of machines and a wide range of vegetation.

trimmer head Alloy.A robust and reliable trimmer head with quick and easy line loading. Suitable for any Husqvarna trimmer line and designed with optimal line locking. The maintenance is minimised and the low cutting height gives an attractive and tidy result.

New!

produCt name desCription dimensions, Ø mm

Colour Code

length, m /ft

produCt number

“X” Force • Increased cutting performance by robust surface design and a new co-polymer formula

• Co-extruded trimmer line with excellent durability and improved wear resistance

• Surface finish minimising welding• Less sensitive to snapping• Suits all Husqvarna trimmer heads

2.0 15 / 50 Donut 575 57 20-01

58 / 190 Donut 575 57 20-02

130 / 425 Spool 575 57 20-03

2.4 15 / 50 Donut 574 88 29-01

50 / 164 Donut 574 88 29-02

90 / 300 Donut 574 88 29-03

240 / 800 Spool 574 88 29-04

2.7 12 / 40 Donut 574 88 29-05

43 / 141 Donut 574 88 29-06

70 / 233 Donut 574 88 29-07

240 / 800 Spool 574 88 29-08

3.0 10 / 33 Donut 574 88 29-09

32 / 105 Donut 574 88 29-10

56 / 186 Donut 574 88 29-11

240 / 800 Spool 574 88 29-12

3.3 75 / 250 Donut 574 88 29-13

240 / 800 Donut 574 88 29-14

Whisper X • Co-extruded trimmer line, gives high durability

• Patented Whisper pattern – Reduced noisle level with 50 % (7– 8 dBA) compared to round lines

• Surface finish minimising welding• Less sensitive to snapping• Suits all Husqvarna trimmer heads

2.4 90 / 300 Donut 544 96 52-07

240 / 800 Spool 544 96 52-08

2.7 70 / 233 Donut 544 96 52-01

240 / 800 Spool 544 96 52-04

3.0 56 / 186 Donut 544 96 52-02

240 / 800 Spool 544 96 52-05

3.3 75 / 250 Spool 544 96 52-03

240 / 800 Spool 544 96 52-06

Whisper • Patented Whisper pattern – Reduced noisle level with 50 % (7– 8 dBA) compared to round lines

• Surface finish minimising welding• Colour coded for right dimensions• Suits all Husqvarna trimmer heads

1.5 15 / 50 Donut 531 00 92-10

2.0 15 / 50 Donut 531 00 92-11

130 / 425 Donut 531 00 92-30

2.4 15 / 50 Donut 531 00 92-12

90 /300 Donut 531 00 92-31

240 /800 Spool 531 00 60-86

2.7 12 / 40 Donut 531 00 92-13

70 / 233 Donut 531 00 92-32

240 / 800 Spool 531 00 75-65

3.0 10 / 33 Donut 531 00 92-14

56 / 186 Donut 531 00 92-33

240 / 800 Spool 531 00 60-88

Round • High quality trimmer line for standard grass• Colour coded for right dimensions• Suits all Husqvarna trimmer heads

1.5 15 / 50 Donut 531 00 92-15

2.0 15 / 50 Donut 531 00 92-16

130 /425 Donut 531 00 92-35

2.4 15 / 50 Donut 531 00 92-17

90 / 300 Donut 531 00 92-36

240 / 800 Spool 531 00 60-52

2.7 12 / 40 Donut 531 00 92-18

70 / 233 Donut 531 00 92-37

240 / 800 Spool 531 00 75-68

3.0 10 / 33 Donut 531 00 92-19

56 / 186 Donut 531 00 92-38

240 / 800 Spool 531 00 60-54

3.3 75 / 250 Spool 531 00 92-39

F Line • Pre-cut trimmer line optimised for use with F 35 and F 55

3.5 25 pcs Pre-cut 504 04 50-01

205 pcs Pre-cut 504 04 51-01

33

trimmer heads, lines and blades

Because not every job is the same, Husqvarna offers a range of trimmer lines with different dimensions, lengths and shapes for all kinds of requirements and demands. Through special production techniques, the materials can be combined to provide improved durability, reduced noise level by patented Whisper pattern and lines less susceptible to snapping.

ergonomically designed trimmer lines.

a1 545 03 11-01 d1

537 29 95-01200 mm (adapter incl.)

g1 537 04 85-01incl. b1 f1

b1 503 93 42-02 e1

502 12 26-01255 mm

C1 537 28 85-01 f1 503 89 01-01

a2 503 97 71-01 d2

537 31 09-02200 mm (adapter incl.)

g1 537 04 85-02incl. b1 f1 (USA)

b2 531 00 77-01 e2

502 14 55-01200 mm

C2 537 29 74-01 f2 503 90 18-02

(20 mm / 1")

a3 503 95 43-01 d3

537 21 71-01200 mm

g2 952 71 56-16incl. f1

b3 537 33 16-01 C3

544 02 65-02 f3 502 15 70-02

M12 (20 mm / 1")Ballbearing

a4 537 29 73-01 d4

502 03 94-06225 mm

g2 952 71 56-15incl. f1 (USA)

b4 545 03 09-01 C4

544 16 03-01 f4 503 89 01-02

M12

a5 537 34 94-03 d5

501 32 04-01200 mm (adapter incl.)

g3 537 04 85-04incl. f1 (USA)

b5 544 46 43-01 C5

502 46 49-01

a6 544 10 74-02 d6

502 43 55-01225 mm (adapter incl.)

g4 544 24 96-01incl. b3 f4

a7 502 46 50-01 g4 544 24 96-02

incl. b3 f4 (USA)

a8 574 47 95-01

a8 + 1 3

a1 + 1 3

b4 + 2 4 5 6 17 +

a2 b1 + 2 4 5 6 7 17 +

a2 b1 + 2 4 5 6 7 17 32 33 37 38 42 +

b4 + 2 33 37 38 39 40 41 42

b4 + 2 4 5 6 17 32 33 37 38 39 40 41 42 +

a5 b3 + 8 9 10 11 12 18 +

b4 + 2 4 5 6 17 + +

a2 b1 + 2 4 5 6 7 17 + +

a5 b3 + 8 9 10 11 12 18 + +

b4 + 2 4 5 6 17 + +

a2 b1 + 2 4 5 6 7 17 + + +

a5 b3 + 8 9 10 11 12 15 16 18 + + +

a3 b5 + 12 13 15 16 18 C1 + 18 + + +

a6 + 12 13 14 16 + + +

a4 + 12 13 15 16 18

C2 + 18 + + + +

a7 + 12 13 14 16 + + + +

a6 + 12 13 14 16 + + + +

a5 b3 + 8 9 10 12 15 16 18 + + +

a5 b3 + 8 9 10 12 15 16 18 + +

a5 b3 + 8 9 10 12 15 16 18 + +

21

21

21

21

21

21

21

trimmer guards saW blade guards Kits Combination

guardsplant prot.

guards blade guards support Cups

model grass Course grass bushes and trees

122C

128C

128l

323l / 327ls / 224l / 326ls

324ldX / 327ldX

122ld

128ldX

535ls

128rJ

233rJ / 327rJX

535rJ

128r

323r / 323rii / 324rX / 233r327rX / 327rdX / 133r / 226r535rX / 535rXt / 336fr235r / 135r

345fr / 545rX / 545rXt

555rXt

343f / 545fX / 545fXt

555fX / 555fXt

555frm

143r / 153r

143rii / 241r s. am / 236r

243rJ / 253rJ / 253rb / 243r / 253r

34

Cutting equipment guide

545 03 11-01

537 29 95-01200 mm (adapter incl.)

537 04 85-01incl.

503 93 42-02 502 12 26-01255 mm

537 28 85-01 503 89 01-01

503 97 71-01

537 31 09-02200 mm (adapter incl.)

537 04 85-02incl. (USA)

531 00 77-01 502 14 55-01200 mm

537 29 74-01 503 90 18-02(20 mm / 1")

503 95 43-01

537 21 71-01200 mm

952 71 56-16incl.

537 33 16-01 544 02 65-02 502 15 70-02

M12 (20 mm / 1")Ballbearing

537 29 73-01

502 03 94-06225 mm

952 71 56-15incl. (USA)

545 03 09-01 544 16 03-01 503 89 01-02

M12

537 34 94-03

501 32 04-01200 mm (adapter incl.)

537 04 85-04incl. (USA)

544 46 43-01 502 46 49-01

544 10 74-02

502 43 55-01225 mm (adapter incl.)

544 24 96-01incl.

502 46 50-01 544 24 96-02

incl. (USA)

574 47 95-01

30 537 18 33-11Saw head

36 952 71 19-21HAC

1 531 00 92-78T25 (R)

(semiauto)11 504 04 48-01

F35 M12(fixed)

20 537 02 19-01Grass 255-8 1"

30 537 18 33-12Saw head (USA)

37 537 35 35-01TA850

2 531 00 92-79T25 (L)

(semiauto)12 531 00 92-62

T45X M12(semiauto)

21 537 14 96-01Grass 255-4 1"

31 537 18 33-16PA1100

38 537 42 54-01CA150

3 531 00 92-61T25C (R)

(semiauto)13 544 90 91-01

T55X M12(semiauto)

22 537 14 90-01Multi 255-3 1"

31 537 18 33-17PA1100 (USA)

39 952 71 19-10PAC

4 531 00 92-24S35 M10

(manual)14 504 04 49-01

F55 M12(fixed)

23 537 14 92-01Multi 275-4 1"

32 537 19 67-01SR600

39 952 71 19-16PAC (USA)

5 531 00 92-25T35 M10

(semiauto)15 531 00 92-26

Auto 55 M12 1"24 501 04 40-01

Multi 350-3 1"

33 537 19 69-01EA850

40 952 71 19-07CAC

6 544 90 90-01T35X M10

(semiauto)16 502 26 08-15

SII M12(manual)

25 537 14 94-01Multi 300-3 1"

34 537 19 66-05HA110

41 952 71 19-08EAC

7 531 00 60-93Superauto II M10 1"

17 531 00 38-11TriCut M10

26 501 04 37-01Multi 330-2 (1")

35 537 19 66-06HA850

42 952 71 19-11BAC

8 531 00 92-68S35 M12

(manual)18 531 00 38-24

TriCut M1227 537 27 75-01

Scarlett 200-22 1"

9 531 00 92-69T35 M12

(semiauto)28 537 27 83-01

Scarlett 225-24 (1")

10 544 90 90-02T35X M12

(semiauto)29 522 96 51-01

Shredder blade (1")

+

+

+ g2 g2 + 20

+ g1 g1 + 20 30

+ g1 g1 + 20 30 31 34 35 36

+ 31 34 35 36

+ g2 g2 + 20 31 34 35 36

+ g4 g4 + 20

+ b4 + f1 + 20 21

+ b1 + f1 + 20 21 30

+ b3 + f4 + 21 22 23

+ b4 + f1 + 20 21

+ b1 + f1 + 20 21 d1 + 27

+ b3 + f4 + 22 23 25 d5 + 27

+ + C1 b5 + f2 f3 + 22 23 25 d2 + 27

+ C5 + f2 f3 + 22 23 24 25 d6 + 28

+ + C2 + f2 f3 + 22 23 25 d3 + 27 d4 + 28

+ C5 + f2 f3 + 22 23 24 25 d3 + 27 d4 + 28

+ C4 + f2 f3 + 22 23 24 25 d6 + 28 C3 + 29

+ b3 + f4 + 22 23 25 26 d5 + 27

+ b3 + f4 + 22 23 25 26

+ b3 + f4 + 22 23 25 26

trimmer guards saW blade guards Kits Combination

guardsplant prot.

guards blade guards support Cups attaChments Cutting equipments

model grass Course grass bushes and trees

122C

128C

128l

323l / 327ls / 224l / 326ls

324ldX / 327ldX

122ld

128ldX

535ls

128rJ

233rJ / 327rJX

535rJ

128r

323r / 323rii / 324rX / 233r327rX / 327rdX / 133r / 226r535rX / 535rXt / 336fr235r / 135r

345fr / 545rX / 545rXt

555rXt

343f / 545fX / 545fXt

555fX / 555fXt

555frm

143r / 153r

143rii / 241r s. am / 236r

243rJ / 253rJ / 253rb / 243r / 253r

35

Cutting equipment guide

36

dual purpose Combi can. Carries petrol and oil without spills.

developed for the best performance.Continuous research and product development of all husqvarna oils and products.

cans.Through years of working with professional forestry customers we have been able to develop a range of cans and accessories which do the job they are needed for and more.

tool belt.Keep tools in arms reach with our hands-on tool belt. Two holsters, rear tool carrier, lifting hook, lifting tong and measuring tape.

Petrol and oils.Designed to meet all the tough demands of our equipment, Husqvarna’s petrols and oils are formulated to give good performance.

37

intelligent solutions

Handheld tools.We offer a wide range of rugged and dependable forest and garden tools to facilitate your work; axes, knives, lifting hooks, breaking bars and more. Quality made as you have come to expect with everything from Husqvarna.

Complete tool belt. peace of mind knowing you have the tools for the job.

hooks, tongs, straps and wedges. designed to help you get the job done.

Husqvarna accessories.Husqvarna by name, Husqvarna by nature – that means that you are guaranteed high quality tools and products. All our goods are thoroughly tested and are made for the job they are intended to do.

Safety in the forest.Working with power products requires sensible safe handling but you should always be prepared in case something happens. First aid kits are as important as a sharp chain, so make sure you always carry one with you.

38

oils and lubriCants

Husqvarna oils optimised for superior performance.You can always trust in Husqvarna providing oils suitable for your working conditions and that they are optimised according to the development of our engines. Husqvarna’s approach is to use the perfect blend of synthetic and highly refined mineral oils. Together with specially developed additives it will give you perfect lubrication, seizure protection and a cleaner engine.

Husqvarna two-stroke oil, XP. This 2-stroke oil has been developed for tough, professional use with high loads and engine speed. Excellent for use with all Husqvarna products, especially for engines with a cylinder volume over 55 cm³. It has extremely good lubrication qualities on high load engine details like for instance the connecting rod bearing. Large reciprocating masses (piston and connecting rod) in combination with high speeds and high loads demands special lubricating qualities in an oil. The XP-oil also gives a cleaner engine and less coating on the piston and in the crankcase compared to competing oils. Husqvarna low Smoke oil.The formula used in Husqvarna Low Smoke oil gives a very good seizure protection, both against lean and carbon related piston seizures. Like the XP-oil it’s a mix of mineral and synthetic oils. The additive package is one of the best on the market. The oil gives low smoke emission, especially important when used in products often run in densely built-up areas. The Low smoke oil is best used for cylinder volume up to 55 cc.

Husqvarna two-stroke oil, HP. Husqvarna HP oil is developed to work well with low quality petrol. Carefully selected components with special additive gives a cleaner engine and less coating on the piston and cylinder walls, exhaust system and crankcase. engine oil comparison.Tests made with Husqvarna chainsaws show the differences between a reference oil and Husqvarna 2-stroke oils. Cylinder and piston comparison run under the same circumstances but with different engine oil. The cylinders were run on the same engine block. The test was done with a Husqvarna 346 XP under very heavy load in a specially developed laboratory method. The Husqvarna oils gives better protection against lean and carbon related piston seizures.

Husqvarna oils have been proven to leave less deposits on the pistons reducing damage at high temperatures.

Regular 2-stroke oils leave deposits on the pistons causing damage at high temperatures.

39

New!

oils and lubriCants

Multi-purpose grease.For general greasing purposes. 225 g. 502 51 27-01

eco grease.For brushcutters bevel gears. A proven grease that lubricates the transmission and absorbs the axial forces. Environmentally compatible. Biodegradable. 100 g. 503 97 64-01

Synthetic transmission oil, SAe 10W-50.Fully synthetic transmission engine oil that is specially developed for the transmission in Husqvarna’s AWD vehicles. Extreme temperature stable oil, suitable for both cold and warm environments. Fulfills API SM, ACEA A3/B4, API GL-1&4. 4 litres, 576 61 96-01.

engine oil, WP 4t SAe 30. High-quality oil for 4-stroke lawnmowers. Excellent protection for engine. Approved according to API SG. 0.6 litres, 544 04 18-01.

Air filter oil. Biodegradable. Effectively traps particles in the filter, keeping the engine cleaner and reducing wear. Washable in soap and water. 1 litre, 531 00 92-48.

engine oil, WP 4t 10W / 40. High quality engine oil for all 4-stroke garden equipment. Developed for easy starting at low temperatures, perfect lubrication at all operating conditions and low oil consumption. The oil keeps your engine free from deposits and fouling which extends the life of the engine. Meets requirements of API SL (CF), ACEA A3 (B3). 1.4 litres, 531 00 92-85.

Husqvarna saw chain oil, Vegoil. A vegetable-based chain oil that has been carefully developed by Husqvarna to produce a highly effective, environmentally compatible lubricant. Biodegradable and economical – up to 40 % less oil is required than with conventional oils. Low viscosity even in extreme cold and able to handle water contamination. Can be cleaned with common detergents. 5 litres, 531 00 75-78.

Husqvarna two-stroke oil, XP. Recommended for top-performing chainsaws, grass and brushcutters. Fulfils the requirements of JASO FB / ISO EGB and Rotax 253 snow mobile test. 0.1 litres, 544 45 01-01. 1 litre, 544 45 01-02. 4 litres, 544 45 01-04.

Husqvarna two-stroke oil, lS.Fulfils the requirements of JASO FD / ISO EGD and Rotax 253 snowmobile test. 0.1 litres, 544 45 02-01. 1 litre, 544 45 02-02. 4 litres, 544 45 02-03. 10 litres, 544 45 02-04. 208 litres, 531 00 50-76.

Husqvarna two-stroke oil, HP.Fulfils the requirements of JASO FB / ISO EGB and Rotax 253 snowmobile test. 0.1 litres, 544 01 58-05. 1 litre (standard bottle), 544 01 58-08. 1 litre (dosage bottle), 544 01 58-09. 4 litres, 544 01 58-10. 10 litres, 544 01 58-11. Not available in UK / Ireland.

spare parts Cans produCt number

Environmental kit, contains holder for the oil can, fuel spout, oil spout, lid, oil can and adapter 505 69 80-60Fuel pipe for Husqvarna petrol can 505 69 80-02Oil pipe for Husqvarna oil can and combi can 505 69 80-03Fuel pipe adapter to be fitted to a 5 litre disposable can 505 69 80-19Cap with retaining strap 505 69 80-11Blade holder with attachments for 3 – 4 blades 505 69 80-23

40

ergonomiC fuel Cans

Husqvarna cans are ergonomically designed to enhance working conditions.Our years of working with professional forestry customers have enabled us to develop a range of cans and accessories which do the job they are needed for and more. Practical and sturdy cans approved in accordance with UN recommendations.

combi can.Developed in-house, our Combi can holds 5 litres of petrol and 2.5 litres of oil. The fuel container is fitted with an efficient overfill protection. When the tank is full, the flow is shut off automatically and you can lift up the can without spilling. The fuel container can be separated from the oil container and is also sold separately. Between the cans there is a space for files and other tools. Approved in accordance with UN recommendations. 505 69 80-55

Petrol can 6 litres, green.Specially adapted for lawnmowers and cars with catalytic converters. Approved in accordance with UN recommendations. 505 69 80-40Fuel pipe for green petrol can. 505 69 80-41Not available in the UK

Petrol can 5 litres, orange.Can with an effective overfill protection. When the tank is full, the flow is automatically shut off and you can lift the can up without spillage. Approved in accordance with UN recommendations. 505 69 80-51Not available in the UK.

When the tank is full, the flow is automatically shut off and you can lift the can up without spillage.

Labelled information enables the user to clearly manaege working with these specially designed cans.

Space between cans can be used as holder for different tools, such as files etc.

41

e f

g h

a

b

C

d

i J

K l

forestry aCCessories

A. complete tool belt.Complete tool belt with two holsters, lifting hook, lifting tong, rear tool carrier and measuring tape 15 m. The tool belt is extra wide, to provide more support for the back. 505 69 90-15

B. lifting- / timber tongs.New, sharper, and improved hook with grinded edges. Special hardened steel with treated surface makes them robust and less sensitive for rust. Handle has an ergonomic design for better grip. Opening capacities of 20 cm (574 38 75-01) and 30 cm (574 38 76-01).

c. lifting hook.Extended hook for longer, wider opening to give a better grip when working. New improved comfortable grip handle design. Special hardened steel with treated surface makes it robust and less sensitive for rust. With a scale for measuring tip diameter. 574 38 74-01

d. Measuring tape.Easy to use, lightweight design ideal for measuring logs and stems. Can be adjusted without tools. Marked on both sides. Robust with aluminum top.20 m imperial/metric, 505 69 73-62.15 m imperial/metric, 505 69 73-60.15 m metric comes with Timber hook, 505 69 73-16.Holster, 505 69 75-00.

e. Breaking bar with cant hook.Fully forged with plastic handle, repeat heel and turning hook, 505 69 43-01. Cant hook, 505 69 43-02.

F. long breaking bar.New design with improved specification. Forged bottom parts provide extra strength to exposed areas. Front teeth give better grip. The length gives extra power and extra long handle makes it possible for a two-hand grip. Knob at the end prevents feet from slipping. Equipped with a hook for turning trees and logs. Length 140 cm, 574 38 72-01. Cant hook, 505 96 43-03.

g. Foot breaking bar, Viktor.Telescopic foot breaking bar. Can be carried in a holster on a belt, 504 98 16-92. Holster, 505 69 32-92.

H. Impact bar.New design and improved material specification gives a durable and robust product. The handle has an optimised grip and the front teeth give a better grip in wood. An impact heel minimises hand vibrations when working with a wedge. 47 cm, 574 38 71-01

I. Belts.PVC, 505 69 00-00. Leather, 505 69 00-01.

J. Strap.8 m, 5000 kg. 505 69 80-33

K. Strap.5 m, 500 kg. 505 69 80-34

l. turning straps.For moving /turning jammed trees and as a carrying strap for cans. 505 69 80-20

every tool has a job to do and Husqvarna tools do it well.As you know, at Husqvarna we spend every minute designing and developing our outdoor power products to meet the growing needs of our users, but that doesn’t mean that we forget about the smaller tools. Every tool in our portfolio of products has been carefully selected to ensure that you have the tools you need to do a job well. We offer a wide range of rugged and dependable tools and accessories to facilitate your work; axes, knives, lifting hooks, breaking bars and more.

New!

New!

New!

New!

42

ba

e

i

K

J

l

m

f

g

h

C

d

n

o

q

p

New!

New!

A. clearing axe.With hickory shaft and replaceable blade on both faces, 505 21 71-01. Spare shaft, 505 69 45-27.

B. Bark spade.115 cm long, 12 cm wide blade, 505 21 72-01.

c. clearing knife.With hardened special steel blade and a wooden handle made of hickory. Blade comes with a plastic edge protector. Use for brush clearing and debranching of trees. Total length 60 cm (handle 31 cm). 575 57 22-01. Not available in UK / Ireland.

d. callipers.With table of cylinder volumes, centimeter gradations on 2 sides. 36 cm, 505 69 47-30, 46 cm, 505 69 47-46. Holster, 505 69 32-04.

e. Felling wedges.Made of tough polyamide. 14 cm, 505 69 47-02, 20 cm, 505 69 47-03, 25 cm, 505 69 47-04.

F. Magnesium felling wedge.In magnesium, 12 cm, 505 69 47-00.

g. Aluminum felling wedge.Helps the tree fall in the right direction. 500 g 22 cm, 576 92 99-01, 800 g 26 cm, 576 92 99-02.

H. Splitting wedge.Twisted wedge for splitting logs, to be used with a sledge or a sledge axe. 577 25 92-01

I. Marking tape. 100 % viscose, biodegradable. Two versions: Two-coloured, 25 mm wide and approx. 70 m long. With one colour, 20 mm wide and approx. 75 m long. Orange 574 28 77-00, red 574 28 77-01, blue 574 28 77-02, yellow 574 28 77-03, white 574 28 77-04, red /white 574 28 77-05, orange /yellow 574 28 77-06, blue /white 574 28 77-07.

J. Marking paint, aerosol.Aerosol, approx. 400 ml. Orange 505 69 84-00, red 505 69 84-01, blue 505 69 84-02, yellow 505 69 84-03, white 505 69 84-04, fluorescent orange 505 69 84-10. Not available in UK / Ireland.

K. Marking paint, plastic container.Plastic container, 5 litre. Orange 505 69 85-80, red 505 69 85-81, blue 505 69 85-82, flourescent orange 505 69 85-90. Not available in UK / Ireland.

l. crayons.Crayon 11 mm, 12 pcs, 505 69 46-02. Crayon holder, 505 69 46-00. Inner sleeve, 505 69 46-01.

M. First aid kit. Includes first aid bandage, 9 plasters in various sizes, 2 wound swabs, 1 mirror, 1 cotton bud, 504 09 53-01.

N. Foldable pruning saw 180 / 220.Lightweight pruning saw with an ergonomic handle. With locking foldaway blade. Available in 2 sizes: 18 cm (510 19 21-01) and 22 cm (510 19 21-04). Not available in UK / Ireland.

o. limbing saw.Curved blade with hook at tip and blade for cutting bark to prevent splitting. Gets to plant roots. 33.3 cm. Available with (505 69 45-66) or without bark blade (505 69 45-76). Not available in UK / Ireland.

P. Straight pruning saw with holster 240 / 300.Includes a useful holster that attaches to your belt. Available in two sizes: 24 cm (510 19 21-03) and 30 cm (510 19 21-04). Not available in UK / Ireland.

Q. telescopic shaft.2.5–5 meters. Length is easy to adjust. 502 42 73-01. Not available in UK / Ireland.

forestry aCCessories

New!

New!

43

ab

C

d

e

f

g

forestry aCCessories

chainsaw bag.Special pockets for chain saw files. Velcro fastening pocket to outside. Fits all our chainsaws. 48 litres. 576 85 91-01.

Forest bag with wheels.Retractable handles. Hard and stable bottom with wheels. Side pockets. Grip handles on sides and carrying straps. 105 litres. 576 85 90-01.

Forest bag.Roomy bag, perfect to pack all your protective equipment in. Hard and stable bottom, grip handles on sides, side pockets and carrying straps. 105 litres. 576 85 95-01.

Back pack.Hard and stable bottom and pockets inside. Opening for ear phones and mp3 player. Rain cover. Comfortable shoulder straps. 29 litres. 576 85 92-01.

Husqvarna axes – genuine craftsmanship.Husqvarna provides a wide range of axes for different kinds of work. Forged in Sweden from Swedish axe steel with a consistently high quality. With good maintenance, your axe will last for a long time. Don’t store the axe too warmly, since the handle might shrink. Always dry off dirt and moisture before putting the sheath on. If the axe is put away for a longer time, grease it to prevent rust.

A. camping axe.Small axe for hiking and camping life. 37.5 cm. 576 92 63-01.

B. Sledge axe. For splitting logs and large chunks of wood, also for use as a sledge. 80 cm. 576 92 66 01.

c. Splitting axe.For splitting stronger wood and fire wood. 75 cm. 576 92 67-01.

d. Small splitting axe. For basic splitting of firewood. 50 cm. 576 92 68-01

e. Forest axe. For felling smaller trees and limbing logs. 65 cm. 576 92 62-01.

F. carpenter’s axe. For wood work with a recess in the head by the handle.50 cm. 576 92 65-01.

g. Hatchet axe.For small firewood and garden work.37.5 cm. 576 92 64-01.

Convex edge for branch lopping, felling and splitting.

sharpening.

Straight edge for hacking.

Sharpened at an angle an axe becomes dangerous to use, as it can easily slip.

A concave edge entails a high risk of the axe splintering.

New!

New!New!

New!

New!

New!

New!

New! New!

New!

Ste

ndah

ls.

115

25 6

6-25

UK.

Liffey Distributors Limited, 309, Northwest Business Park, Ballycoolin, Dublin 15, Ireland. Tel: 0035 3182 42600. Fax: 0035 3182 42606. Email [email protected] www.husqvarna.ie

Copyright © 2011 Husqvarna AB (publ). All rights reserved. Husqvarna and other product and feature marks are trademarks of the Husqvarna Group as displayed at www.international.husqvarna.com