Huawei Pcn Dbs3900(Ac) Apm30h&Tmc11h&Ibbs200d&t -Ver.b to Ver.d

PCN

Product Change Notice

Product Change NoticeHuawei PCN SRAN-2012XXXX (EOM Notice on DBS3900(AC) APM30H&TMC11H&IBBS200D&T Ver.B cabinets)0. AbstractThe Ver.B cabinets and internal parts will be in the end of marketing (EOM). The DBS3900 (AC) Ver.D cabinets will be sold to replace the Ver.B cabinets. This PCN is intended for customers using Huawei DBS3900 (AC) Ver.B cabinets.The last date for purchase of the Ver.B cabinets is June 30, 2013 and the last date for supply of Ver.B cabinet is December 31, 2013.1. Supplier InformationHuawei Technologies. Co., Ltd.

2. Basic InformationPCN No.SRAN-2012XXXX

PCN VersionRev: 01

Change CategoryB

MilestoneReleaseOfficial release of the PCNJuly 15, 2012

ImplementationGA of new cabinetsDecember 31, 2012

End of MarketingNo order accepted for Ver.B cabinetJune 30, 2013

End of ProductionNo delivery after EOP for Ver.B cabinetDecember 31, 2013, from which no old cabinets will be delivered (the delivery time in new sales contracts should not be later than this date)

End of ServiceNo service provided after EOSSubject to the specific contract

3. Involved Systems and ProductsThere are two types for APM30H/ TMC11H but only one type for IBBS200D/T in Ver.D cabinets. Customer can select one type to replace the current version of cabinets.Main SystemSubsystemHardwareSoftwareFirmwarePlug-in

DBS3900 (AC) Ver.D1Cabinets and internal partsYesNoNoNo

DBS3900 (AC) Ver.D2YesYes note1NoNo

Note 1To replace Ver.B cabinets with the same maximum configuration of 6 RRU, the Ver.D1/Ver.D2 cabinets can work normal with the same BTS software version. But if the enhanced configuration of Ver.D2 need be used like supporting 12 RRU, the BTS software version should be upgraded.4. Correlated ChangeN/A5. BOM Code ChangeNew BOM CodeBoard NameOld BOM CodeBoard NameComplete Replacement

Ver.D1APM30H cabinetVer.BAPM30H cabinetYes

Ver.D2APM30H cabinetVer.BAPM30H cabinetYes

Ver.DIBBS200D cabinetVer.BIBBS200D cabinetYes

Ver.DIBBS200T cabinetVer.BIBBS200T cabinetYes

Ver.D1TMC11H cabinet Ver.BTMC11H cabinet Yes

Ver.D2TMC11H cabinet Ver.BTMC11H cabinet Yes

01071382EPU05A-0302400460EPS 01BNo (Note 1)

01071384EPU05A-0502400462EPS 01DNo (Note 1)

02310HBJR4850G02130608EPW30-48A No (Note 1)

02310LYPPMU 11A02317275PMU 01BNo (Note 1)

02120734FAN 02D02120559FAN 02ANo (Note 1)

03021VGYCMUEA03020NXECMUANo (Note 1)

02120732DCDU-12C02120479DCDU-03CNo (Note 1)

21161105TEC module21161003TEC moduleNo (Note 1)

32030092The external fan of Heat Exchanger of APM30H/TMC11H Ver.D1/Ver.D2 cabinet3203007797051086The external fan of Heat Exchanger of APM30H/TMC11H Ver.B cabinet No (Note 1)

Note 1The spare parts of the Ver.D cabinet are different from the Ver.B cabinets. Therefore, a certain quantity of spare parts of the Ver.B cabinets must be reserved for future use. The last order date of spare parts is June 30, 2015 for Ver.B cabinets.6. Categorization Basis(1) Ver.B cabinets and parts will be in the EOM and be replaced by Ver.D..(2) The new release has all the functions of current version and better performance. The Ver.B can support 6 RRU(2*40W) at maximum. The Ver.D1 can support 6 RRU(2*60W) at maximum. The Ver.D2 supports 6 RRU(2*60W) at maximum without BTS software upgrading. The Ver.D2 also supports 12 RRU(2*60W) with one DCDU-12B added at 1U user space in APM30H after BTS software is upgraded. The Ver.D2 cabinet supports two BBU in one APM30H also.7. Change Description(A) The change of the Ver. D cabinets The changed parts include the Heat Exchanger, fan tray, TEC and DCDU.etc. The external size and installing of new cabinet are the same as old one. The Ver.D cabinet improves the capacity of power supply, heat dissipation and cabling. It has all the functions of the Ver.B cabinet and better performance instead. The cabinet version info can be acquired by OMC remotely or be seen on the nameplate in the cabinet on site.(B) The major changed parts from Ver.B to Ver.D cabinet

7.1 The change of Heat Exchanger and interal Fan tray in APM30H and TMC11H

(A) The air vent areas are enlarged for the internal heat exchanger on the door of APM30H/TMC11H Ver.D1/Ver.D2 cabinet. But the external size of the door keeps the same as the Ver.B still. The external fan type and Heat exchanger core are changed from Ver.B cabinet to Ver.D1/Ver.D2 cabinet. The external fan type is the same between APM30H/TMC11H Ver.D1 and APM30H/TMC11H Ver.D2.

(B) The fan tray is changed from FAN 02A to FAN 02D. The air outlet position is changed from top to bottom.The HPMI board is cancelled to make the monitor cable connection simple on the new fan tray. The GATE andTEM_BAT1interfaces are supported directly in PMU11A module for APM30H. The other internal reserved interfaces are cancelled to avoid wrong connection. (C) The heat dissipation capacity of APM30H/TMC11H is improved.

Cabinet versionHeat dissipationAcoustic noise

APM30H/TMC11H Ver.B700WETS 300 753, Rural area, Class 4.1E(6.1bels@25, 6.7bels@45)

APM30H/TMC11H Ver.D1700W and